ALUMINIUM PROFILE SYSTEM SERIES With the basic grid mm (slot 5); mm (slot 6), 16mm, mm and 0mm (slot ). In addition to this, the complete connection technology and a large range of accessories.
TABLE OF CONTENTS SERIES ALUMINIUM PROFILES SERIES PAGE Technical data and profile cross-sections 2.4-2.17 Processing of profiles for connectors 2.1-2.19 Prices of aluminium profile processing 2. Aluminium profile prices and delivery units 2.4-2.17 COMPONENTS PAGE Angle connector 2.22 Articulated feet 2..56 ASK combination foot 2.57 ASK handle system 2. Ball caster 2.42 Base plates 2.5 Bolt anchor 2.61 Bolt connector 2.22 Bracket 2.26-2.27 Bullet catch 2.39 Cable carrier 2.50 Cable ducts 2.52 Carrier rollers 2.42 Casters with screw-on plate 2.64-2.65 Casters with bolt hole 2.62 Centring plate kit 2.24 Clamping lever 2.43 Clamping bracket 2.2 Clamping block 2.46 Closure profiles 2.46 Connecting plate 2.25 Corner bracket 2.2 Cover and closure profiles 2.46 Cover caps for aluminium profiles 2. Cover cap for bracket 2.29 Cover cap for cable duct 2.53 Cover for cable duct 2.52 Cover caps for corner bracket 2.29 Cover cap for handle 2. Cross-cable tie block 2.50 Damping ring for articulated foot 2.56 Door lock 2.3 Door lock, compact 2.3 Door stop 2.39 Fastening bracket for bullet catch 2.39 Fastening bracket for telescopic support 2.60 2.0
TABLE OF CONTENTS SERIES COMPONENTS PAGE Fastening kit for casters 2.64 Fixed casters with screw-on plate 2.64-2.65 Form connector 2.25 Foundation bracket 2.59 Handles 2. Handle, angled 2.41 Heavy duty casters with screw-on plate 2.66 Hinges 2.36-2.37 Joints 2.44 Joint angle 2.2 Lifting caster 2.63 Magnetic latch 2.39 Multi-uniblock 2.4-2.49 Plate for articulated feet 2.54 Rubber cover profile 2.51 Profile connector 2.22 Quick connector, rotation lock 2.23 Quick connector, screw-in 2.22 Rhomboid T-slot nut 2.33 Rollers for roller track 2.43 Roller holder 2.42 Round head screws 2.34-2.35 Screw-in connector 2.25 Screws for cover cap 2.53 Sealing profile 2.47 Sliding strip 2.42 Slot nuts 2.32-2.33 Steel bracket 2.25 Swivel fastening 2.45 System slide 2.51 Threaded rods with ball 2.55 Threaded sleeve 2.55 Universal bullet catch 2.3 Uni butt connector 2.24 Uni clamping kit 2.24 Universal floor support 2.60 2.1
We set the standards for innovation, product and occupational safety, product quality and performance. 2.2
CORPORATE PHILOSOPHY FROM PLANNING TO IMPLEMENTATION: ASK - EVERYTHING FROM ONE SOURCE Automation components for engineering and industrial companies We deal with the implementation of simple and cost effective production facilities with the help of our aluminium profile modular system. From 3D construction to straightforward implementation. For more then ten years we have devoted ourselves to generating the best solutions for the most varied system configurations, in order to be equipped for all eventualities. Our many years of experience enable us to provide the exact solution to meet your requirement. Traditionally grown as well as innovative ideas are taken into consideration and this approach has acquired us high customer satisfaction. The most varied systems in particular our modular system - enable a cost friendly and visually appealing implementation of your projects. We supply technical manufacturing facilities for industrial companies and components for machinery and plant engineering. We would be glad to assist you with detailed advice about a suitable system, 3D construction and project planning, complete procurement of individual components and their assembly and corresponding supply of spare parts. In doing so, we not only commit ourselves to the implementation of complex solutions but also to the supply of individual components. Our multiple and extensive range combined with our straightforward approach will also convince you. Put us to the test! 2.3
SERIES SLOT 5 PROFILE slot 5 Article no.: 10 Ø 4,3 Ix 0,72 cm 4 Wx 0,72 cm³ Iy 0,72 cm 4 Wy 0,72 cm³ 1,0 cm² 0,4 kg/m 6,35 5 PROFILE 2N90 slot 5 Article no.: Ø 4,3 Ix 0,7 cm 4 Wx 0,76 cm³ Iy 0,7 cm 4 Wy 0,76 cm³ 1,91 cm² 0,51 kg/m Ø 4,3 6,35 5 6,35 5 PROFILE slot 5 Article no.: Ix 0,41 cm 4 Wx 1,41 cm³ Iy 5,14 cm 4 Wy 2,57 cm³ 3,32 cm² 0,9 kg/m PROFILE slot 5 Article no.: 31 Ix 9,33 cm 4 Wx 4,62 cm³ Iy 9,33 cm 4 Wy 4,62 cm³ 5,14 cm² 1,39 kg/m 6,35 Ø 4,3 5 2.4
SERIES SLOT 5 Ø 4,3 PROFILE 60 slot 5 Article no.: 33 Ix 2,06 cm 4 Wx 2,06 cm³ Iy 16,09 cm 4 Wy 5,36 cm³ 4,76 cm² 1,2 kg/m 6,35 60 5 Ø 4,3 PROFILE 0 slot 5 Article no.: 34 Ix 2,76 cm 4 Wx 2,76 cm³ Iy 36, cm 4 Wy 9,02 cm³ 6,25 cm² 1,67 kg/m 5 Ø 3,3 PROFILE 10 slot 5 Article no.: 05 10 6,35 13 Ix 0,12 cm 4 Wx 0,22 cm³ Iy 0,53 cm 4 Wy 0,53 cm³ 1,29 cm² 0,22 kg/m 3,50 6,35 0 5 2.5
SERIES SLOT 6 PROFILE L slot 6 Article no.: Ø 5 Ix 2,90 cm 4 Wx 1,94 cm³ Iy 2,90 cm 4 Wy 1,94 cm³ 3,43 cm² 0,93 kg/m Ø 5 9,75 6 Ø 5 9,75 60 6 Ø 5 9.75 60 9,75 6 PROFILE slot 6 Article no.: 45 Ix 4,15 cm 4 Wx 2,77 cm³ Iy 4,15 cm 4 Wy 2,77 cm³ 4,67 cm² 1,26 kg/m PROFILE 2N90 slot 6 Article no.: 42 Ø 5 Ix 3,02 cm 4 Wx 1,9 cm³ Iy 3,02 cm 4 Wy 1,9 cm³ 3,54 cm² 0,96 kg/m 9,75 6 PROFILE 60L slot 6 Article no.: 50 Ix 5,54 cm 4 Wx 3,69 cm³ Iy 21,22 cm 4 Wy 7,07 cm³ 6,13 cm² 1,65 kg/m PROFILE 60 slot 6 Article no.: 52 Ix 7,92 cm 4 Wx 5,2 cm³ Iy 29, cm 4 Wy 9,77 cm³,47 cm² 2,29 kg/m 6 2.6
SERIES SLOT 6 60 PROFILE 60 60L slot 6 Article no.: 53 Ø 5 Ix 39,9 cm 4 Iy 39,9 cm 4 Wx 12,96 cm³ Wy 12,96 cm³ 10,1 cm² 2,7 kg/m PROFILE 1 L slot 6 Article no.: 57 Ø 5 Ix 11,04 cm 4 Wx 7,21 cm³ Iy 154,51 cm 4 Wy 25,44 cm³ 11,65 cm² 3,11 kg/m 60 PROFILE 60 1L slot 6 Article no.: 5 9,75 Ø 5 9,75 1 60 9,75 6 6 1 Ix 77,39 cm 4 Wx 25, cm³ Iy 261,7 cm 4 Wy 43,65 cm³ 1,7 cm² 5,05 kg/m 6 Ø 3,3 PROFILE 12L slot 6 Article no.: 15 9,75 12 Ix 0,25 cm 4 Wx 0,39 cm³ Iy 1,46 cm 4 Wy 0,9 cm³ 1,5 cm² 0,43 kg/m 6 2.7
SERIES SLOT PROFILE EL slot Article no.: 71 Article no.: 71LE1#00 Ø 6, Ix 7,3 cm 4 Wx 3,69 cm³ Iy 7,3 cm 4 Wy 3,69 cm³ 5,07 cm² 1,37 kg/m 12,25 PROFILE L slot Article no.: 60 Article no.: 60LE1#00 Ø 6, Ix 9,00 cm 4 Wx 4,50 cm³ Iy 9,00 cm 4 Wy 4,50 cm³ 6,46 cm² 1,74 kg/m 12,25 PROFILE L, BLACK ANODIZED slot Article no.: 60 SW Ø 6, Ix 9,00 cm 4 Wx 4,50 cm³ Iy 9,00 cm 4 Wy 4,50 cm³ 6,46 cm² 1,74 kg/m 12,25 PROFILE slot Article no.: 72 Ix 13,96 cm 4 Wx 6,9 cm³ Iy 13,96 cm 4 Wy 6,9 cm³ 9,16 cm² 2,47 kg/m Ø6, 12,25 2.
SERIES SLOT Ø 6, PROFILE L 1N slot Article no.: 65 Ix 9,54 cm 4 Wx 4,66 cm³ Iy 9,01 cm 4 Wy 4,50 cm³ 6,61 cm² 1,7 kg/m 12,25 Ø 6, PROFILE L 2N90 slot Article no.: 70 Ix 9,64 cm 4 Wx 4,70 cm³ Iy 9,64 cm 4 Wy 4,70 cm³ 6,0 cm² 1,4 kg/m 12,25 Ø6, PROFILE L 2N10 slot Article no.: 6 Ix 9,02 cm 4 Wx 4,51 cm³ Iy 10,11 cm 4 Wy 5,05 cm³ 6,77cm² 1,3 kg/m 12,25 PROFILE L 3N slot Ø 6, Article no.: 69 Ix 9,62 cm 4 Wx 4,70 cm³ Iy 10,22 cm 4 Wy 5,11 cm³ 6,96 cm² 1,90 kg/m 12,25 2.9
Gewindestift M6x 5 9 29 x 0 PROFILE 0L slot Article no.: 0 Article no.: 0LE1#00 Ø 6, Ix 16,60 cm 4 Wx, cm³ Iy 69,54 cm 4 Wy 17,3 cm³ 11,3 cm² 3,04 kg/m 0 12,25 PROFILE 0L BLACK ANODIZED slot Article no.: 0SW Ø 6, Ix 16,60 cm 4 Wx, cm³ Iy 69,54 cm 4 Wy 17,3 cm³ 11,3 cm² 3,04 kg/m 0 SERIES SLOT CLAMP PROFILE slot Article no.: 63 Ix 9,51 cm 4 Wx 4,76 cm³ Iy 12,27 cm 4 Wy 6,14 cm³ 7,51 cm² 2, kg/m 23 Zum Anfertigen von Schutzelementen, Schwenk- und Schiebetüren. 12,25 Hohe Festigkeit des Rahmens durch eingespannte Flächenelemente. Lieferung erfolgt mit Klemmleiste und Ø 6, ~105 Gewindestift M6x CLAMP PROFILE - 10 slot Article no.: 64 Ix 11,41 cm 4 Wx 5,71 cm³ Iy 13,0 cm 4 Wy 6,54 cm³,41 cm² 2,56 kg/m Gewindestift M6x 5 9 Ø 6, 17 12,25 ~105 29 x 0 Zum Anfertigen von Schutzelementen, Schwenk- und Schiebetüren. Hohe Festigkeit des Rahmens durch eingespannte Flächenelemente. Lieferung erfolgt mit Klemmleiste und 12,25 Gewindestift M6x 2.10
SERIES SLOT Ø 6, PROFILE 0 slot Article no.: 1 Ix 26,7 cm 4 Iy 101,19 cm 4 Wx 13,44 cm³ Wy 25,29 cm³ 16,76 cm² 4,53 kg/m 12,25 0 Ø 6, PROFILE 0L 2N slot Article no.: 2 Ix 17,73 cm 4 Wx,63 cm³ Iy 70,7 cm 4 Wy 17,72 cm³ 11,60 cm² 3,13 kg/m 12,25 0 Ø 6, PROFILE 0 3N90 slot Article no.: 79 Ix 1,24 cm 4 Wx 9,17 cm³ Iy 76,12 cm 4 Wy 17,72 cm³ 11,9 cm² 3,14 kg/m 12,25 0 0 PROFILE 0 0L slot Article no.: 90 6, Ix 134,06 cm 4 Wx 33,51 cm³ Iy 134,06 cm 4 Wy 33,51 cm³ 0 19,75 cm² 5,33 kg/m 12,25 Ø 2.11
SERIES SLOT PROFILE 0 0 slot Article no.: 91 0 Ix 17,70 cm 4 Wx 46,92 cm³ Iy 17,70 cm 4 Wy 46,92 cm³ 26,66 cm² 7,19 kg/m 12,25 Ø 6, 0 PROFILE 1L slot Article no.: 3 Ø 6, Ix 24,22 cm 4 Wx 12,11 cm³ Iy 2,54 cm 4 Wy 36,76 cm³ 16,12 cm² 4,35 kg/m 12,25 1 PROFILE 1 slot Article no.: 4 Ø 6, Ix 39,0 cm 4 Wx 19,90 cm³ Iy 322,66 cm 4 Wy 53,77 cm³ 24,3 cm² 6,5 kg/m 12,25 1 2.12
SERIES SLOT 0 PROFILE 0 1L slot Article no.: 95 12,25 Ø 6, 1 Ix 1,9 cm 4 Wx 50,47cm³ Iy 421,67 cm 4 Wy 6,34 cm³,13 cm²,13 kg/m 0 PROFILE 0 1 slot Article no.: 96 6, Ix 274,6 cm 4 Wx 6,71 cm³ Iy 574,6 cm 4 Wy 92,72 cm³,05 cm² 10,1 kg/m 12,25 Ø 1 Ø 6, PROFILE 160L slot Article no.: 5 Ix 31,1 cm 4 Wx 15,90 cm³ Iy 500,32 cm 4 Wy 62,54 cm³,90 cm² 5,64 kg/m 12,25 160 2.13
SERIES SLOT PROFILE 160 slot Article no.: 6 Ø 6, Ix 52,72 cm 4 Wx 26,36 cm³ Iy 739,62 cm 4 Wy 92,45 cm³ 32,00 cm²,64 kg/m 12,25 160 PROFILE 0 160L slot Article no.: 99 0 Ix 267,07 cm 4 Wx 66,77 cm³ Iy 907, cm 4 Wy 113,4 cm³ 37,0 cm² 10,21 kg/m 12,25 Ø 6, 160 PROFILE 0 160 slot Article no.: 2100 0 Ix 360,9 cm 4 Iy 122,33 cm 4 Wx 90,22 cm³ Wy 153,54 cm³ 50,07 cm² 13,52 kg/m 12,25 Ø 6, 160 2.14
SERIES SLOT PROFILE 16L slot Article no.: 56 5 Ø 12,25 16 Ix 0,64 cm 4 Iy 3,34 cm 4 Wx 0,7 cm³ Wy 1,67 cm³ 2,24 cm² 0,60 kg/m PROFILE 16 slot Article no.: 55 Ø 5 12,25 16 Ix 1,05 cm 4 Iy 6,9 cm 4 Wx 1,22 cm³ Wy 3,45 cm³ 4,24 cm² 1,12 kg/m 0 PROFILE 0 16 slot Article no.: Ø 4,2 12,25 16 Ix 2,15 cm 4 Wx 2,69 cm³ Iy 50,76 cm 4 Wy 12,69 cm³,13 cm² 2, kg/m 16 PROFILE 160 16 slot Article no.: 9 Ix 3,0 cm 4 Wx 4,25 cm³ Iy 7,3 cm 4 Wy 3,4 cm³ 13, cm² 3,75 kg/m 12,25 160 5 6,2 2.15
SERIES SLOT PROFILE L 45 slot Article no.: 67 Ø 6, Ix 6,50 cm 4 Wx 2,90 cm³ Iy 6,50 cm 4 Wy 2,90 cm³ 5,5 cm² 1,50 kg/m 45 Ø 6, 45 12,25 12.25 PROFILE 45 slot Article no.: 66 Ix 9,39 cm 4 Wx 4,0 cm³ Iy 9,39 cm 4 Wy 4,0 cm³ 7, cm² 1,97 kg/m PROFILE L R - 90 slot Article no.: 61 12,25 R Ix 6,65 cm 4 Wx 3,04 cm³ Iy 6,65 cm 4 Wy 3,04 cm³ 5,72 cm² 1,54 kg/m Ø 6, PROFILE R / R0 - slot Article no.: 73 Ix 6,42 cm 4 Wx 2,4 cm³ Iy,90 cm 4 Wy 3,0 cm³ 6, cm² 1,67 kg/m R 0 R 12,25 PROFILE R / R0-45 slot Article no.: 74 Ix 21,33 cm 4 Wx 6,74 cm³ Iy 16,06 cm 4 Wy 6,14 cm³ 10,23 cm² 2,76 kg/m Ø 6, R 0 45 R 12,25 2.16
90 SERIES SLOT PROFILE R/R0-60 slot Article no.: 75 R 0 Ø 6, 60 Ix 22,64 cm 4 Wx 5,96 cm³ Iy 34,92 cm 4 Wy 11,56 cm³ 10,50 cm² 2,2 kg/m R 12,25 PROFILE R/R0-90 slot Article no.: 76 Ø 6, Ix 76,25 cm 4 Wx 1,69 cm³ Iy 76,25 cm 4 Wy 1,69 cm³ 15,00 cm² 4,05 kg/m R 0 R 12,25 PROFILE 32 1 slot Article no.: 35 12,25 32 Ix 2,50 cm 4 Wx 1,70 cm³ Iy 2,50 cm 4 Wy 1,70 cm³ 3, cm² 0,90 kg/m 1 1 Ø 14 SHAFT CLAMP PROFILE slot Article no.: 999000 1,36 cm² 0,36 kg/m 10 22 SHAFT D14 Article no.: 99900039 : : Hardened steel, Cf53, polished 1,21 kg/m 2.17
PROCESSING ALUMINIUM PROFILES SERIES PROFILE PROCESSING FOR CENTRING PLATE KIT s5 s6 s Article no.: 003 Profile x slot 5 Hole Ø Distance (b) Thread Ø 5mm 10mm M5 Article no.: 005 b Profile x slot 6 Hole Ø Distance (b) Thread Ø 6mm 15mm M6 Ø 010 Article no.: 010 Profile x slot Hole Ø Ø 7mm Distance (b) mm Thread M -M- PROFILE PROCESSING FOR UNI CLAMPING KIT s5 s6 s Article no.: 371005 Profile x slot 5 Ø Hole Ø Distance (b) Depth (c) Ø 12mm 11mm 9 mm b 3710 Article no.: 371010 Profile x slot 6 Hole Ø Distance (b) Depth (c) Ø 16mm 15mm 14 mm Article no.: 3710 c Profile x slot Hole Ø Distance (b) Depth (c) Ø mm 21mm 1 mm 2.1
PROCESSING ALUMINIUM PROFILES SERIES b PROFILE PROCESSING FOR BOLT CONNECTOR slot Article no.: 360009 Profile x Nut Hole (Ø a) Distance (b) Ø 14,1mm mm Ø a Article no.: 360019 Profile 0x0 Nut bzw. x0 Nut 360009 Hole (Ø a) Distance (b) Ø 14,1mm mm 360019 QUICK CONNECTOR with rotation lock slot 15 Central connector Article no.: 3250 Slot mm Steel galvanised Ø Ø 12 2.19
PROCESSING ALUMINIUM PROFILES SERIES ITEM DESIGNATION ARTICLE NO. Cuts 1 Saw cut up to & including x 101010 2 Saw cut up to & including 60x60 1010 3 Saw cut up to & including 90x90 1010 4 Saw cut greater than 90x90 1010 5 Saw cut on mitre 101050 Holes 6 Hole up to & including Ø 10.0 1010 7 Hole up to & including Ø 15.0 10 Hole up to & including Ø.0 10 Thread 9 Thread M6 1009 10 Thread M 1010 11 Thread M12 10 12 Thread M16 10 2.
TECHNICAL DATA ALUMINIUM PROFILES SERIES EXTRUSION PROFILES PER DIN EN 1-1 Alloy Mechanical data (values in pressing direction) AL Mg SI 0,5 F25 No. 3.36.72 (heat-hardened) Tensile strength Rm min. 2 N/mm² Yield limit Rp 0.2 min. 190 N/mm² Breaking elongation A5 min. 10% E module approx. 70.000 N/mm² Brinell hardness approx. 75 HB 2,5/17,5 Coefficient of linear expansion 23,x10-6/K Surface per DIN 17611 E6/EV1- matt pickled and natural colour anodised Layer thickness approx. 10µm Layer hardness 250-350 HV Special colours on request Delivery length 6000mm (or special data in the catalogue) PROFILE TOLERANCES The dimension information is dependent on the production accuracy of the tools, the tool wear and the production fluctuations. Within a profile production batch deviations arise within the 1/100 range. PROFILE TOLERANCES IN MM Measurement range from - to Tolerance ± 0 10 ± 0,15 10 15 ± 0, 15 ± 0,25 45 ± 0, 45 60 ± 0, 60-90 ± 0,45 90 1 ± 0,60 1 150 ± 0,0 150 10 ± 1,00 10-2 ± 1, 2.21
CONNECTION TECHNOLOGY SERIES PROFILE CONNECTOR slot Profile connector slot Article no.: 3410 2 Length Scope of supply Slot 10mm Incl. fastening kit M6 mm Steel galvanised 6 76 10 76,5,5 ANGLE CONNECTOR 45 slot Angle connector 45 Article no.: 3510 52 Profile Scope of supply Slot x Incl. fastening kit M mm Zinc die cast, aluminium colour-coated 12 45 10 Ø,5 QUICK CONNECTOR screw-in slot Screw-in type Article no.: 3225 Ø17 M10 Thread Hole Slot For fastening aluminium profiles to plates M10 17mm mm Steel galvanised SW6 61 BOLT CONNECTOR Ø 14MM slot Bolt connector Article no.: 360009 Ø14 Length Slot mm mm Steel galvanised Bolt connector 0 Article no.: 360019 25.5 360009 Length Slot 0mm mm Steel galvanised 0 Ø14 Conductive material design per DIN EN 613-5-1; suitable for use in ESD protected zones. 65,5 2.22
CONNECTION TECHNOLOGY SERIES 35,1 QUICK CONNECTOR with rotation lock slot Quick connector with rotation lock Article no.: 3250 Ø 7, Ø 11, Slot mm Galvanised steel SW4 Ø 17,4 2.23
c CONNECTION TECHNOLOGY SERIES UNI CLAMPING KIT slot 5 slot 6 slot Uni clamping kit slot 5 a= Ø12mm, b= 11mm, c= 9mm Article no.: 371005 Ø a Uni clamping kit a= Ø16mm, b= 15mm, c= 14mm Uni clamping kit a= Ømm, b= 21mm, c= 1mm Article no.: 371010 Article no.: 3710 b 3710 Scope of supply Incl. connector, screw and slot nut Zinc die cast b 3710 UNI BUTT CONNECTOR slot Uni butt connector a= Ømm, distance b= 21mm, Depth c= 16,5mm Scope of supply Article no.: 3710 Incl. connection kit and screw Zinc die cast c Ø a Ø a b b b CENTRING PLATE KIT slot 5 slot 6 slot Centring plate kit slot 5 a= 10mm, Ø4,5mm, M5 Article no.: 003 Centring plate kit slot 6 a= 15mm, Ø5,5mm, M6 Article no.: 005 010 Centring plate kit slot a= mm, Ø7,5mm, M Scope of supply Article no.: 010 Incl. connector, screw Steel galvanised Ø b -M- 2.24
CONNECTION TECHNOLOGY SERIES 390002 24 6.4 Ø 7,1 FORM CONNECTOR / SCREW CONNECTOR s5 s6 s Form connector slot 5 Scope of supply Article no.: 390002 Sleeve, screw M4, slot nut Ø 10 390004 Form connector slot 6 Scope of supply Form connector slot Scope of supply Article no.: 390004 Sleeve, screw M5, slot nut Article no.: 390010 Sleeve, screw M, slot nut 390012 Ø 12 390010 24 Screw-in connector (M6) Scope of supply Cover cap for screw-in connector for Art.no. 390012 Article no.: 390012 Sleeve, screw M6, slot nut Article no.: 390014 390012 31 form connector cover cap Steel galvanised PA, black Ø 12 Connector slot 5 and slot 6 with right-handed thread; connector slot with left-handed thread! AM6 3 CONNECTING PLATE slot 6 slot x60 Article no.: 35010 x0 Article no.: 350 60 Steel, powder-coated black AM 4 0 4 STEEL BRACKET slot x Artikel Nr.: 350 AM Steel, powder-coated black 2.25
CONNECTION TECHNOLOGY SERIES BRACKET slot 5 Without fastening kit Slot 5 Article no.: 351211 With fastening kit Slot 5 Article no.: 351221 Zinc die cast Aluminium colour-coated 351221 BRACKET slot 6 Without fastening kit Slot 6 Article no.: 351231 With fastening kit Slot 6 Article no.: 351241 Zinc die cast Aluminium colour-coated 351241 BRACKET 60 slot 6 Without fastening kit Slot 6 Article no.: 351242 With fastening kit Slot 6 Article no.: 351243 Zinc die cast Aluminium colour-coated 60 60 351242 BRACKET slot Without fastening kit Slot Article no.: 351251 With fastening kit Slot Article no.: 351261 Zinc die cast Aluminium colour-coated 39 351261 2.26
CONNECTION TECHNOLOGY SERIES BRACKET 0 slot Without fastening kit Slot Article no.: 351291 With fastening kit Slot Article no.: 3511 0 Zinc die cast Aluminium colour-coated 39 0 BRACKET 0 0 slot Without fastening kit Slot Article no.: 351111 With fastening kit Slot Article no.: 351121 76 Zinc die cast Aluminium colour-coated 74 76 BRACKET 0 160 slot Without fastening kit Slot Article no.: 351311 With fastening kit and cover cap Slot Article no.: 351321 160 Zinc die cast Aluminium colour-coated 0 2.27
CONNECTION TECHNOLOGY SERIES CLAMPING ANGLE slot x slot Article no.: 351210 Ø 9,5 Scope of supply Bracket, fastening kit Zinc die cast Aluminium colour-coated 9 6 35 32 7,5 36 JOINT ANGLE slot x slot Article no.: 3512 Scope of supply Bracket, fastening kit Zinc die cast Aluminium colour-coated Ø 14 Ø 9 36 32 6 Ø 9 36 CORNER BRACKET slot 6 slot x slot 6 Article no.: 3505 x slot Article no.: 3510 Scope of supply Bracket, fastening kit Zinc die cast Aluminium colour-coated 6 5 15 15 27,5 27,5 Ø 6,5 5 Ø 9 37,2 37,2 2.2
CONNECTION TECHNOLOGY SERIES COVER CAP FOR CORNER BRACKET slot 6 slot x angled Article no.: 3515 x round Article no.: 3516 x angled Article no.: 35 x round Article no.: 35 Plastic PA COVER CAPS FOR BRACKETS slot 5 slot 6 slot xx Article no.: 321132 xx Article no.: 321143 xx Article no.: 321146 x0x0 Article no.: 32114 0x0x0 Article no.: 321175 Plastic PA 2.29
CONNECTION TECHNOLOGY SERIES COVER CAPS FOR ALUMINIUM PROFILES s5 s6 s Slot 5 Slot 6 Slot t = 4mm t = 3mm t = 4mm Plastic PA COVER CAPS FOR ALUMINIUM PROFILES Item Designation Article no. 1 10x 421005 2 x 421010 3 16x 421015 4 16x0 421016 5 16x160 42101 6 x 4210 7 x60 t=2,5 421025 x12 421029 9 x 4210 10 x60 421035 11 x 4210 12 xr 421041 13 x 45 421042 14 R/0-421043 15 R/0-45 421044 16 R/0-60 421045 17 R/0-90 421046 1 x screw-mountable 421047 for screw countersunk M4x16 19 x with hole Ø10,5mm 42104 x0 421050 21 x0 screw-mountable 421051 for screw countersunk M4x16 22 x1 421055 23 x160 421057 24 0x0 421060 25 0x1 421070 26 0x160 42100 2.
CONNECTION TECHNOLOGY SERIES 2.31
CONNECTION TECHNOLOGY SERIES SLOT NUT SLOT 5 swivelling with ball Slot 5 M3 Article no.: 3510 12 4,9 0,6 Slot 5 M4 Article no.: 35 35 Slot 5 M5 Article no.: 35 7,7 4,6 Steel galvanised M SLOT NUT SLOT 6 swivelling with ball Slot 6 M3 Article no.: 3505 17 6,4 0,6 Slot 6 M4 Article no.: 3515 10.6 7 3525 Slot 6 M5 Article no.: 3525 Slot 6 M6 Article no.: 3535 M Steel galvanised SLOT NUT SLOT swivelling with ball Slot M4 Article no.: 3550 22 7, 0, 3550 Slot M5 Article no.: 3550 Slot M6 Article no.: 3550 13,5 7,2 Slot M6 ESD Article no.: 355042 M Slot M Article no.: 355050 Slot M ESD Article no.: 355052 Stahl, verzinkt 2.32
CONNECTION TECHNOLOGY SERIES 22 SLOT NUT SLOT VA swivelling with ball 7, 0, Slot M5 Article no.: 355031 13,5 7,2 Slot M6 Article no.: 355041 Slot M Article no.: 355051 M Stainless steel 23 SLOT NUT SLOT heavy, without stay Slot M6 Article no.: 356010 Slot M Article no.: 3560 1 6, Steel galvanised M 22 7,9 2,9 SLOT NUT SLOT heavy, with stay Slot M4 Article no.: 3560 17 9,6 Slot M5 Article no.: 3560 Slot M6 Article no.: 356050 M Slot M Article no.: 356060 Steel galvanised 14 RHOMBOID T-SLOT NUT swivelling, slot Slot M4 Article no.: 357005 2,9 Slot M5 Article no.: 357010 M 19,3 Slot M6 Article no.: 3570 Steel galvanised 2.33
CONNECTION TECHNOLOGY SERIES BUTTON HEAD SCREWS M4 ISO 7 M4 x 6 Article no.: 370010 M4 x Article no.: 3700 M4 x 10 Article no.: 3700 M4 x 12 Article no.: 3700 M4 x 14 Article no.: 370050 Strength class 10.9 Galvanised steel BUTTON HEAD SCREWS M5 ISO 7 M5 x 10 Article no.: 370060 M5 x 12 Article no.: 370070 M5 x 14 Article no.: 37000 M5 x 16 Article no.: 370090 M5 x Article no.: 370100 Strength class 10.9 Galvanised steel Other screw forms, screw sizes and thread sizes on request 2.34
CONNECTION TECHNOLOGY SERIES BUTTON HEAD SCREWS M6 ISO 7 M6 x 10 Article no.: 3701 M6 x 12 Article no.: 3701 M6 x 14 Article no.: 3701 M6 x 16 Article no.: 370150 M6 x Article no.: 370160 Strength class 10.9 Galvanised steel BUTTON HEAD SCREWS M ISO 7 M x 16 Article no.: 370170 M x 1 Article no.: 37010 M x Article no.: 370190 M x Article no.: 3700 Strength class 10.9 Galvanised steel BUTTON HEAD SCREWS with flange ISO 7-2 M6 M6 x 14 Article no.: 370210 M6 x 16 Article no.: 3702 M6 x Article no.: 3702 Strength class 10.9 Galvanised steel 2.35
ACCESSORIES SERIES PLASTIC HINGES slot 6 slot x Article no.: 4210 Ø 6 Ø 14 9 Dimensions A1=17,5mm A2=17,5mm B1=29,5mm B2=29,5mm slot 6mm Nut Ø 6,6 42 x Article no.: 42 Dimensions A1=17,5mm A2=22,5m B1=29,5mm B2=3,5m slot 6 slot x Article no.: 42 Dimensions A1=22,5mm A2=22,5mm B1=3,5mm B2=3,5mm slot mm 4 2 B1 A1 A2 B2 Scope of supply Hinges with fastening kit Plastic PA glass fibre reinforced, axis stainless steel Ø 6 HINGES WITH ELONGATED HOLE Ø 14 x60 slot 6 Article no.: 45 51 Ø Ø 14 9,5 13,3 Ø,3 24 x0 slot Article no.: 51 5,5 Zinc die cast, axis stainless steel 6,4 13 11 Ø 6,4 1 60 45 0 51 2.36
ACCESSORIES SERIES 14 26 26 14 HINGE INTERNAL ALUMINIUM slot Hinge left Article no.: 42 50 10 Ø 5,5,5 Ø 5 50 10 Hinge right Article no.: 4245 Scope of supply Hinge without fastening kit Anodised aluminium, axis stainless steel,5,5 50 50 10 10 26 14 14 26 4,5 5 4,5 R5,5 Ø 6,6 Ø 6,6 R5,5 42 4245 Nut2 Nut1 HINGES ALUMINIUM s5 s6 s x Article no.: 99900265 Dimensions A1=11,25mm A2=11,25mm B1=19,5mm B2=19,5mm slot 1=5mm, slot 2=6mm Ø 2,5 Ø Ø 4,5 x Article no.: 99900266 Dimensions A1=17,5mm A2=17,5m B1=29,5mm B2=3,5m slot 1=6mm, slot 2=mm 99900267 x Article no.: 99900267 Dimensions A1=22,5mm A2=22,5mm B1=35,5mm B2=35,5mm slot 1=mm, slot 2=10mm Scope of supply Hinge without fastening kit Anodised aluminium, axis stainless steel Ø 6,2 Ø 14 Ø 6,5 2 50 9 9 5 Nut2 Nut1 Ø 2,5 Ø Ø 4,5 Nut 1 Nut 2 17 33 B1 A1 Ø 6,2 A2 B2 99900265 Ø 14 Ø 6,5 Nut 1 Nut 2 2 50 A1 A2 B1 B2 99900266 & 99900267 A1 A2 B1 B2 2.37
ACCESSORIES SERIES DOOR LOCK slot 6 slot Simultaneous locking Article no.: 10 Separate locking Article no.: Zinc die cast 0 64,5 75 Montage requires further processing,, 45, 50 >5 35 53 3 66 DOOR LOCK COMPACT Simultaneous locking Article no.: 12 69 Separate locking Article no.: 22 Aluminium die cast 56 45 7 No further processing required,, 45, 50 >5 UNIVERSAL BULLET LATCH s6 s s10 Universal bullet latch Article no.: 50 16 47 Plastic PA, glass fibre reinforced 7 50 29 37 19,5 37 2 57 74 5,4 24,5 31,5 36,5 56 50 2.3
Ø 7 SW 13 M BULLET CATCH slot 6 slot Bullet catch Article no.: 5022 12,5 5,2 12,5 Plastic PA, glass fibre reinforced 24 33 43,5 10 4 ACCESSORIES SERIES 5022 2 15.75 6,1 49 32 31 9.5 MOUNTING BRACKET FOR BULLET CATCH Mounting bracket Article no.: 5021 12.5 37 Steel, black powder coated.5 5021 6, MAGNETIC LATCH slot 6 slot Magnetic latch Article no.: 5010 10 31.75 5 13,50 4.5 60 75 Plastic PA, glass fibre reinforced 5010 DOOR STOP slot Door stop (with fastening kit) Article no.: 5050 Ø 4, 35 42 Ø 4,5 Function Stop bracket with wedge For damping with 2 elastomer inserts Plastic PA glass fibre reinforced 2.39
ACCESSORIES SERIES PLASTIC HANDLE Handle PA 0 Article no.: 5 Dimensions a = 90mm b = 32mm c = 0mm d =12mm e = Ø4,5mm b 60 Handle PA 1 Article no.: 60 a Dimensions a = 136mm b = 4,5mm c = 1mm d =17mm e = Ø5,5mm Handle PA 160 Article no.: 70 d c Ø e 70 Dimensions a = 1mm b = 60mm c = 160mm d =2mm e = Ø,5mm Plastic PA, glass fibre reinforced COVER CAP FOR HANDLE Cover cap for handle PA 160 Article no.: 71 Plastic PA glass fibre reinforced 71 ASK HANDLE SYSTEM ASK handle system Article no.: Dimensions X = 0-500mm ASK handle system Article no.: 50 Dimensions X = 501-00mm Plastic PA,glass fibre reinforced 2.
ACCESSORIES SERIES ~35 HANDLE 160, ANGLED Handle, angled 160 Article no.: 55 54 Anodised EL (natural colour) 32 M 160 177 1 HANDLE 1 Handle 1 Article no.: 3100 Aluminium, black 10 M 5 Ø 10 HANDLE 1, CURVED Handle 1 curved Article no.: 3101 Aluminium, black 1 10 M 5 Ø 10 12 MOUNTING KIT FOR HANDLE AL1 Article no.: 3102 5 16 Scope of supply 2 straps 1, GD-Zn, black 2 countersunk screws DIN7991 M5x10, Steel galvanised 2.41
ACCESSORIES SERIES CARRIER ROLLER WITH BALL BEARING Carrier roller slot For linear movement in the profile slot s Article no.: 6010 6010 Max. payload 150N Plastic PA glass fibre reinforced ROLLER HOLDER slot slot 10 Roller holder Article no.: 417010 7 Roller holder ESD Article no.: 417015 10 1 Slot mm / 10mm Plastic PA, glass fibre reinforced 12 50 Ø 6,5 SLIDING STRIP slot Sliding strip Article no.: 415 32 Length Slot 00mm mm Plastic PA, glass fibre reinforced 12, 4 10 BALL CASTER BC 15 slot Ball caster 15 Article no.: 41210 Dimensions Ball Ø 15,0mm Housing: galvanised steel; Ball: stainless steel 21 9,5 2,0 6, Ø 24 Ø 31 Conductive material design per DIN EN 613-5-1; suitable for use in ESD protected zones. 2.42
ACCESSORIES SERIES Rollenlänge=(EL-3) Sägelänge=(EL-) Einbaulänge=(AL-) Achslänge=(El+) ROLLERS FOR ROLLER TRACK slot Installation length EL = up to 0mm Article no.: 4170 Installation length EL = up to 500mm Installation length EL = up to 00mm Axis Tube Load bearing capacity per roller Article no.: 4170 Article no.: 4170 Ø mm Ø mm Max. 150 N Anodised aluminium Roller length according to customer wishes, please quote when ordering: AL = RL = EL = mm mm mm 76 65 CLAMPING LEVER WITH RELEASE KNOB Clamping lever Mx12 Article no.: 370500 Clamping lever Mx16 Article no.: 370505 Clamping lever Mx Article no.: 370510 Clamping lever Mx25 Article no.: 3705 Clamping lever Mx Article no.: 3705 Clamping lever Mx55 Article no.: 3705 L Lever: Thermoplastic, thread: Steel galvanised M Ø,25 2.43
9 9 ACCESSORIES SERIES JOINT slot 5 x Article no.: 426004 Ø 6, Ø 6, 426004 426005 426007 426010 Slot 5mm Zinc die cast, powder-coated JOINT slot 6 x Article no.: 426005 x with clamping lever Article no.: 426007 Slot 6mm Zinc die cast, powder-coated JOINT slot x Article no.: 426010 x with clamping lever Article no.: 4260 Slot mm Zinc die cast, powder-coated SW 14 SW 14 Ø,3 Ø,3 Ø,3 Ø,3 5 5 6 9 7 9 15 22,5 4260 JOINT 0 slot x 0 Article no.: 4260 SW SW 14 14 x 0 with clamping lever Article no.: 4260 Ø Ø,3,3 4260 Slot mm Zinc die cast, powder-coated 50 0 4260 All joints without clamping lever, except 426004 and 4260, can not be clamped by tightening the screws. 2.44
ACCESSORIES SERIES SWIVEL FASTENING slot Article no.: 4150 R 50 R 65 Slot mm / mm Steel galvanised Ø,1 22,5 Ø,2 2,5 6,3 15,5,15 100 1 4150 2.45
ACCESSORIES SERIES COVER AND CLOSURE PROFILE slot 5 Slot 5 black Article no.: 4135 Length Panel thicknesses 00mm 1-3mm PP+TPE 0,6 5 6 6, COVER AND CLOSURE PROFILE slot 6 Slot 6 black Article no.: 41 Length Panel thicknesses 00mm 2-4mm PP+TPE 9,1 41 0, 6 7 COVER AND CLOSURE PROFILE slot Slot black Article no.: 4145 Slot transparent Article no.: 4146 Length Panel thicknesses 00mm 4-6mm PP+TPE 11 4146 0,7 9,4 COVER AND CLOSURE PROFILE slot Slot transparent Article no.: 4147 Length Panel thicknesses 00mm 0,-3mm PP+TPE 11 0,7 9,4 SEALING PROFILE slot Sealing profile 4-6 Panel thicknesses Article no.: 4150 4-6mm 7 11, Sealing profile 4-6 Panel thicknesses Article no.: 4160 2-4mm 14 5 1 5 4150 4160 Length Rolled goods TPE black 4150 4160 2.46
ACCESSORIES SERIES FASTENING OF SURFACE ELEMENTS slot 5 slot 6 slot FASTENING ELEMENT ARTICLE NO. SLOT L2 COMMENT Clamping block 411015 mm L1-11mm Closure profile 4135 41 4145 4146 4147 5mm 6mm mm mm mm L1 + 10mm L1 + 1mm L1 + 21mm L1 + 21mm L1 + 21mm Sealing profile 4150 4160 mm mm L1 + 21mm L1 + 23mm Without (directly in the slot) 5mm 6mm mm L1 + 11mm L1 + 1mm L1 + 22mm Also sealing profile 2.47
ACCESSORIES SERIES MULTI-UNIBLOCK slot 5 slot 6 slot Slot 5 M4 Article no.: 411062 12 12 M4 Slot 6 M5 Article no.: 411064 12,25 11 7 5,5 Slot M6 Article no.: 411065 2 411065 Slot M6 Slot M6 with captive screw, incl. O-ring, dimensions identical to 411 065 Article no.: 411075 5 411062 1 15 M5 Plastic PA glass fibre reinforced 15,5 13,5 3 411075 6 411064 M6 10 24 21,5 5 411065 / 411075 411065 2.4
ACCESSORIES SERIES 1 CLAMPING BLOCK slot Slot Article no.: 411015 5 4,5 21 Panel thicknesses 1-9mm Plastic PA, glass fibre reinforced 19,50 FASTENING OF SURFACE ELEMENTS s5 s6 s L2 L1 FASTENING ELEMENT ART.NO. SLOT L2 Multi-Uniblock 411062 411064 411065 5mm 6mm mm L1-2mm 2.49
ACCESSORIES SERIES CROSS-CABLE TIE BLOCK slot Slot Article no.: 4115 A 11 Plastic PA glass fibre reinforced 10 A 2 4,5 CABLE CARRIER WITH DIVIDER slot Slot Article no.: 4117 32,6 Plastic PA glass fibre reinforced 16 4,5 CABLE CARRIER WITHOUT DIVIDER slot Slot Article no.: 4119 39 35 Plastic PA glass fibre reinforced 4,5 16 COVER PROFILE PLASTIC slot Black Article no.: 4170 9,15 Light grey Article no.: 4175 5,3 413 070 Slot Length mm 00mm Plastic PP COVER PROFILE ALUMINIUM slot Slot Article no.: 4190 9,1 Length 00mm Anodised aluminium 4 6,6 7,9 2.50
74 ACCESSORIES SERIES 14,7 1,5 COVER PROFILE R0 ALUMINIUM Article no.: 4195 R54,7 Length max. 0,55 kg/m 6000mm Anodised aluminium 74,1 4 COVER CAP R0 PLASTIC Article no.: 421059 PA, black 14,7 CLIP Article no.: 4191 Recommended quantity per m Steel galvanised 5 pieces per m 9,3 4 31,5 Slot Rolled goods 32 x 4 mm Article no.: 410 13,5 Plastic, NBR black 9 13 Ø 6, 17,7 Symmetrical system slide Article no.: 413150 25,5 Asymmetrical system slide Article no.: 413155 50 60 Plastic PA 413150 Ø 6, 17,7 50 60 25,5 13 COVER PROFILE RUBBER slot FASTENING OF SURFACE ELEMENTS slot 1 413155 2.51
CABLE DUCTS ALUMINIUM SERIES ALUMINIUM CABLE DUCT Cable duct x a=mm, b=37mm, c=35,5mm Article no.: 511010 Cable duct x 0 a=0mm, b=77mm, c=35,5mm Article no.: 5110 c Cable duct 0 x 0 a=0mm, b=75mm, c=75mm Article no.: 5110 Cable duct 0 x 1 a=1mm, b=115mm, c=75mm Cable duct 0 x 160 a=160mm, b=115mm, c=75mm Length max. Article no.: 511035 Article no.: 5110 00 mm Anodised aluminium b a COVER FOR ALUMINIUM CABLE DUCT Cover a=mm, b=10,5mm Article no.: 511050 a b Cover 0 a=0mm, b=10,5mm Article no.: 511060 Cover 1 a=1mm, b=10,5mm Article no.: 511065 Cover 160 a=160mm, b=10,5mm Article no.: 511070 Length max. 00mm Anodised aluminium 2.52
CABLE DUCTS ALUMINIUM SERIES 2 4 COVER CAPS FOR CABLE DUCT Cover cap x a=mm, b=mm Article no.: 51100 Ø 4,5 Ø,5 Cover cap x 0 a=mm, b=0mm Article no.: 511090 b Cover cap 0 x 0 a=0mm, b=0mm Article no.: 511100 Cover cap 0 x 1 a=0mm, b=1mm Article no.: 511105 a Cover cap 0 x 160 a=0mm, b=160mm Article no.: 511110 Plastic, PA black SCREW FOR COVER CAP DIN 791 4,2 x 9,5 Sheet metal screw Article no.: 3705 Dimensions 4,2 x 9,5mm Galvanised steel 2.53
BASE ELEMENTS SERIES PLASTIC PLATE WITH MOUNTING HOLES Plate Ø 0 with mounting holes incl. rubber plate Article no.: 501350 501350 Hole circle (LK) 55mm, Plastic PA glass fibre reinforced PLASTIC PLATE incl. rubber plate Plate Ø Article no.: 5010 Plate Ø Article no.: 501310 5013 Plate Ø Article no.: 501313 Plate Ø 50 Article no.: 5013 Plate Ø 50 Article no.: 501325 Plate Ø 60 Article no.: 5013 Plate Ø 60 Article no.: 501335 Plate Ø 0 Article no.: 501345 Plastic PA glass fibre reinforced TRAPEZOIDAL PLATE, zinc die cast incl. rubber plate Plate Ø 60 H=1 Article no.: 50123 Plate Ø 0 H= Article no.: 50125 50123 Plate Ø 0 mit Bohrung H= Article no.: 50126 Zinc die cast, powder-coated black Conductive material design per DIN EN 613-5-1; suitable for use in ESD protected zones. 2.54
BASE ELEMENTS SERIES Ø 15 THREADED ROD WITH BALL FOR ARTICULATED FOOT M x L35 SW14 Article no.: 501365 M M x L0 Article no.: 501370 501365 SW L M10 x L70 SW14 Article no.: 501 M10 x L90 Article no.: 501390 M12 x L55 SW14 Article no.: 5010 M12 x L100 Article no.: 501410 5010 M12 x L125 Article no.: 5014 M12 x L150 Article no.: 5014 M16 x L115 SW17 Article no.: 501450 M16 x L150 Article no.: 501460 Steel galvanised 501460 2 Ø M12 THREADED SLEEVE Threaded sleeve Ø Article no.: 50215 Ø 17 Application Steel, galvanised Fastening of adjustable feet Conductive material design per DIN EN 613-5-1; suitable for use in ESD protected zones. 2.55
BASE ELEMENTS SERIES ARTICULATED FOOT, STEEL Articulated foot Ø D44 M12x5 Dimensions Max. load. Article no.: 501011 a = 37 mm 10 000 N M 501011 Articulated foot Ø D5 M12x5 Dimensions Max. load.. Article no.: 501012 a = 5 mm 10 000 N a Articulated foot Ø D44 M16x145 Dimensions Max. load. Article no.: 501013 a = 145 mm 000 N Articulated foot Ø D90 M16x5 Dimensions Max. load. Article no.: 501014 a = 5 mm 000 N Ø D 501012 Articulated foot Ø D90 M16x145 Dimensions Max. load. Article no.: 501015 a = 145 mm 000 N Articulated foot Ø D90 M16x0 Dimensions Max. load. Article no.: 501016 a = 0 mm 000 N Galvanised steel Conductive material design per DIN EN 613-5-1; suitable for use in ESD protected zones. DAMPING RING FOR ARTICULATED FOOT 501017 Damping ring Ø 44 D1 D2 Damping ring Ø 5 D1 D2 Article no.: 501017 52 mm 44 mm Article no.: 50101 66 mm 5 mm A A Damping ring Ø 90 D1 D2 Article no.: 501019 9 mm 90 mm SCHNITT A-A 10 Natural PUR Ø D2 Ø D1 4 2.56
BASE ELEMENTS SERIES ASK COMBINATION FOOT Combination foot Ø D M x 35 Dimensions Max. load Article no.: 501500 a = 32 mm, b = 67 mm 3500 N b Combination foot Ø D M10 x 70 Dimensions Max. load Article no.: 501610 a = 32 mm, b = 102 mm 7700 N 501610 2 -Ma Ø -D- Combination foot Ø D60 M10 x 70 Dimensions Max. load. Article no.: 5016 a = 32 mm, b = 102 mm 7700 N -M- Combination foot Ø D0 M10 x 70 Dimensions Max. load Article no.: 5016 a = 32 mm, b = 102 mm 7700 N b Combination foot Ø D0 M16 x 115 Dimensions Max. load Article no.: 501550 a = 32 mm, b = 147 mm 14 500 N Scope of delivery inkl. threaded rod, plastic plate and rubber plate 501550 2 Ø -Da Threaded rod, galvanised steel; Plate, plastic PA glass fibre reinforced 2.57
x60 M t=12 (W x L) (with thread for articulated feet) Artikel Nr.: 503223 A-A 503223 t BASE ELEMENTS SERIES BASE PLATES M6 (DIN 912) bzw. M (DIN794) x60 M10 t=16 (W x L) Article no.: 503225 M x0 M10 t=16 (W x L) Article no.: 503227 B A A x0 M12 t=16 (W x L) Article no.: 503229 L 503251 x0 M16 t=16 (W x L) Article no.: 503232 0x0 M10 t= 16 (W x L) Article no.: 50323 0x0 M12 t=16 (W x L) Article no.: 503241 0x0 M16 t=16 (W x L) Article no.: 503251 Screws (Not included in the scope of supply!) Zinc die cast, powder-coated black DIN794 Mx25 (x0/0x0) or DIN912 M6x (x60) 2.5
BASE ELEMENTS SERIES STEEL FOUNDATION BRACKET 42 x 160 Article no.: 5005 32 x 0 Article no.: 5010 Steel galvanised Conductive material design per DIN EN 613-5-1; suitable for use in ESD protected zones. 5010 52 A 60 7 1 12 52 3 10 107 0 21 14 9 150 39 52 29 7 61 31 0 11 135 31 160 31 4 22.5 9 42 9 55 5005 13 31 90 61,5 19.5 13 5010 1 FOUNDATION BRACKET ZINC DIE CAST x 160 Article no.: 50 160 A Zinc die cast, powder-coated black A-A 11,2 27,5 50 2.59
5 BASE ELEMENTS SERIES 45 UNIVERSAL FLOOR SUPPORT slot Universal floor support gerade Variante Scope of supply Article no.: 5050 Floor support without fastening kit Steel galvanised 43 90 155 5050 55 55 170 55 Ø 9 1 UNIVERSAL FLOOR SUPPORT slot Universal floor support corner variant Article no.: 5055 26,75 25 3 (4x),5 (4x) 25 26,75 Scope of supply Floor support without fastening kit Steel galvanised 90 90 5055 1 39 155 39 16 135 1 16 Ă 9 135 FASTENING BRACKET for telescopic support R 5,10 10 Ø 10,2 10 5 Fastening bracket for telescopic profile 54x6 (Article no.: 11, page 1.16) Article no.: 5060 12 75 Steel galvanised 62 Ø,5 Conductive material design per DIN EN 613-5-1; suitable for use in ESD protected zones. 27 73,5 100 2.60
BASE ELEMENTS SERIES M ANCHOR BOLT c d Anchor bolt Ø / M a= Hole depth b= Effective anchoring depth c= Fastening height d= Thread length e= Total height Article no.: 5090 55-65 mm 35-44 mm 15-24 mm 45 mm 0 mm a b e Anchor bolt Ø 10 / M a= Hole depth b= Effective anchoring depth c= Fastening height d= Thread length e= Total height Article no.: 5095 65-70 mm 42-4 mm 15-21 mm 45 mm 90 mm Galvanised steel 2.61
Ø 75 normal ESD Brake Unbrak. Brake Unbrak. Ø D2 = 11mm 51010 510190 510110 5101 Ø D2 = 12,5mm 502111 502121 5051 5061 Load bearing capacity 750 N 00 N 1000 N a 24 mm 43,5 mm I 3 mm I 43,5 mm I 3 mm 41 mm b 100 mm 135 mm 160 mm c 25 mm 32 mm 32 mm Ø D 75 mm 100 mm 125 mm a b c a b c WHEELS AND CASTERS FOR SERIES CASTERS WITH BOLT HOLE Ø 100 Ø 125 normal ESD normal ESD Brake Unbrak. Brake Unbrak. 510210 5102 5101 510150 502125 502126 5063 5064 Brake Unbrak. Brake Unbrak. 510223 510224 510152 510154 5021 5021 5070 500 Conductive material design per DIN EN 613-5-1; suitable for use in ESD protected zones. Ø D Ø D Ø D2 Ø D2 510210 510150 2.62
WHEELS AND CASTERS FOR SERIES 36,5 LIFTING CASTER Load bearing capacity Article no.: 5020 00N 2 Scope of supply incl. fastening kit Function Adjustable with levelling spindle max.10mm over caster level (without tools) 22 46 Ø 71 Housing: Die cast aluminium, powder-coated; Roller: Polyamide PA6 Fixed caster: Aluminium, rubber 97 CASTER LIFTING WHEEL Article no.: 502210 11 Load bearing capacity Function N Wheel easily turns into a stable base by engaging the stop lever Ø 0 Wheel: PA 6, natural white Housing: Galvanised steel Base plate: Galvanised steel with rubber insert 60 55 0 12,2 9 76 0,6 M Ø 9 Ø 15 SCHNITT A-A 12 MOUNTING PLATE Artikel Nr.: 502215 0 42,50 60 65 77,50 125 160 10 Funktion Mounting plate for Caster Lifting Wheel (502210) 42,5 A 70 galvanised steel 60 65 A 77,50,7 125 21 45 160 10 70 2.63
WHEELS AND CASTERS FOR SERIES CASTERS WITH SCREW-ON PLATE Ø 75 Ø 100 Ø 125 normal ESD normal ESD normal ESD Brake Unbrak. Brake Unbrak. Brake Unbrak. Brake Unbrak. Brake Unbrak. Brake Unbrak. Swivel caster with screwon plate 510010 5100 510060 510070 5100 510050 510090 510100 50 5035 5045 5047 Fixed caster with screwon plate 5101 5101 5103 510153 502145 503 Load bearing capacity Dimensions a b c d e f g h i 750 N 25 mm 100 mm 4 mm 3 mm 25 mm 4 mm 3 mm 6,3 mm 60 mm j 60 mm ØD 75 mm 00 N 43,5 mm 3mm 43,5 mm 3 mm 135 mm 51,5 mm 46,5 mm 32 mm 61,5 mm 56 mm,5 mm 77 mm 67 mm 100 mm 1000 N 41 mm 160 mm 51,5 mm 46,5 mm 32 mm 61,5 mm 56 mm,5 mm 77 mm 67 mm 125 mm Conductive material design per DIN EN 613-5-1; suitable for use in ESD protected zones. FASTENING KITS FOR WHEELS AND CASTERS Fastening kit for casters Ø 75 with bolt hole in slot 10 Article no.: 502165 Fastening kit for casters Ø 100 Ø 125 with bolt hole Ø 12.5 in core hole Article no.: 502170 Fastening kit for casters with screw-on plate (please cite profile) Article no.: 50210 2.64
a 100 Ø 75 67 25 4 60 135 Ø 100 4 67 51,5 46,5 32 56 61,5 77 160 Ø 125 67 51,5 46,5 32 56 61,5 77 b 5035 Ø D i f g 510090 e d c j a b Ø D i f g d c j WHEELS AND CASTERS FOR SERIES CASTERS WITH SCREW-ON PLATE e h h FIXED CASTERS WITH SCREW-ON PLATE 510153,5,5 6,3 2.65
WHEELS AND CASTERS FOR SERIES HEAVY DUTY CASTER WITH SCREW-ON PLATE Ø 160 With brake Article no.: 503 60 Dynamic bearing capacity Static bearing capacity Net weight Temperature range Running surface hardness 00 N 000 N 2363g - C / +0 C Shore D60 Ø 160 0 503 503 11 14 7 110 105 1 HEAVY DUTY CASTER WITH SCREW-ON PLATE Ø 160 Without brake Article no.: 5039 60 Dynamic bearing capacity Static bearing capacity Net weight Temperature range Running surface hardness 00 N 000 N 25g - C / +0 C Shore D60 Ø 160 0 5039 5039 11 14 7 110 105 1 FIXED CASTER HEAVY DUTY WITHOUT BRAKE Ø 160 Fixed caster without brake Article no.: 50214 Dynamic bearing capacity Static bearing capacity Net weight Temperature range Running surface hardness 00 N 000 N 1573 g - C / +0 C Shore D60 1 0 50214 Ø 160 50214 Ø 12 75 114 105 1 2.66
2.67