AN GP-1 Multifunctional Gear Oil Additive Package AN GP-1 is a multifunctional gear oil additive package designed to produce lubricants for use in automotive and industrial applications. AN GP-1 could provide the gear oils with protection against wear, oxidation, thermal degradation, rust, copper corrosion and foaming performances, preventing spalling and scuffing that could result in equipment failure and downtime. The gear oils with this additive package could perform over a wide range of excellent properties, including friction reduction, heat removal and extreme pressure anti-wear performances. For environmental protection and some adverse effects of traditional EP additives bringing to gears, Anneng has invented one new kind of gear oil additive package AN GP-1A without Sulfur element. With less dosage about 2.6%, the oils will show more excellent performances than others. Use in automotive gear oils API GL-5, and viscosity grade could be SAE90, 80W/90, 85W/90 and 85W/140.The oils GL-5 80W/90 formulated by 4.2% AN GP-1 has passed the bench test CR-CL-42, CR-CL-37 and CR-CL-60. Use in industrial gear oils, and viscosity grade could be N68, N100, N150, N220, N320 and N460. N320 blended by 1.6% AN GP-1 can be line with the standard of US steel USS-224 specification. Recommended dosage GL-4: 2.1%, GL-5: 4.2%, CKD: 1.4%. Item Typical Value Test method Density(20 C), Kg/m 3 1032 ASTM D1298 Flash Point(COC), C 155 ASTM D92 Sulfur, m% 28.2 ASTM D129 Packing: 200 liter metal drum (net weight: 200kg/drum) ventilated warehouses, lower than 55 C.
AN HP-18 Anti-Wear Hydraulic Oil Additive Package High-quality antiwear hydraulic oil additive package AN HP-18 could help combat the effects of contamination with wear protection, thermal stability, rust and corrosion protection in hydraulic oils and hydraulic systems. AN HP-18 is formulated by a variety of excellent components, used in high-pressure and anti-wear hydraulic oils with low zinc content. With the use of AN HP-18, the oil lifespan could be obviously extended and equipment could be lasted longer. For the requirements of some equipments and some adverse effects of Zinc element, Anneng has invented ashless Zinc-free anti-wear hydraulic oil additive package AN HP-19. With a little dosage, it could show excellent performances. Stable quality Excellent extreme pressure performance Excellent thermal oxidation stability Fine demulsification performance Excellent anti-wear property Good anti-oxidation property Use in anti-wear hydraulic oils. Recommended dosage:0.7-1.0% Use in hydraulic transmission oils. Recommended dosage:0.8-1.2% Kinematic Viscosity (100 C), mm2/s 7-12 ASTM D445 Flash Point(COC), C 160 ASTM D92 Zinc, m% 4.8 ASTM D4927 Phosphorus, m% 3.8 ASTM D1091 Sulfur, m% 8.0 ASTM D129 Packing: 200 liter metal drum (net weight: 200kg/drum) ventilated warehouses, lower than 55 C.
AN HP-19 Ashless Zinc-free Anti-Wear Hydraulic Oil Additive Package AN HP-19 is ashless Zinc-free anti-wear hydraulic oil additive package formulated by various kinds of excellent components such as Sulfur-Phosphorus-Nitrogen additives and corrosion inhibitor, etc. AN HP-19 could provide the hydraulic oils with wear protection, thermal stability, fine demulsification performance, rust and corrosion protection. The oil lifespan could be obviously extended and equipment could be lasted longer. The oils with AN HP-19 could meet GB11118.1-94L-HM standard. By the assessment of the experimental performance and the high-pressure pump bench test, the products could meet US DENISON HF-0 standard, reaching the advanced level of the similar products in the world. With a little dosage, it could show excellent performances. Stable quality Excellent extreme pressure performance Fine demulsification performance Excellent thermal oxidation stability Excellent anti-wear property Good anti-oxidation property Use in ashless anti-wear hydraulic oils, and viscosity grade is N32, N46, N68 and N100.Recommended dosage:0.3-0.7% Use in ashless air compressor oils. Kinematic Viscosity (100 C), mm 2 /s 3-8 ASTM D445 Flash Point(COC), C 150 ASTM D92 Nitrogen, m% 0.7 ASTM D3228 Sulfur, m% 3.5 ASTM D129 Packing: 200 liter metal drum (net weight: 200kg/drum) ventilated warehouses, lower than 55 C. Any questions about this product, please contact us. Email:pingli@annechem.com Tel: 0086-24-31562057 Fax: 0086-24-25376521 Welcome to visit our Website: http://anhx.en.alibaba.com/,
AN GE-10 Additive Package for Gasoline Engine Oil API SJ Grade AN GE-10 is a gasoline engine oil additive package formulated by various kinds of the excellent additives such as detergents, dispersants, antioxidants and corrosion inhibitors. The specification of AN GE-10 could cover basic API SJ performances at the most economical dosages. AN GE-10 could provide the oils with excellent high-temperature and low-temperature performances, fine detergency and dipersity, strong anti-oxidation and anti-corrosion performances. This product could be also used in the base oils Class I and II. By the evaluations, 5W/30 oils SJ grade blended by AN GE-10 have passed the bench test MS IID, IIIE, VE and L-38. This product can show the excellent performances with a little dosage. The gasoline engine oils blended with 7.8% AN GE-10 can meet API SJ standard. Good anti-oxidation performance Good dispersity Good detergency Good anti-wear performance Good high-temperature and low-temperature performances Used in gasoline engine oils blended with 7.8% and the oils can meet API SJ standard Density(20 ),g/cm 3 0.9-1.2 ASTM D1298 Flash point (COC) C, 170 ASTM D92 TBN, mgkoh/g 60 ASTM D2896 Calcium, wt% 1.6 ASTM D4927 Zinc, wt%, 1.9 ASTM D4927 Phosphorus, wt%, min 0.7 ASTM D1091 Packing: 200 liter metal drum (net weight: 190kg/drum) ventilated warehouses, lower than 55 C.
AN GE-13 Additive Package for Gasoline Engine Oil API SM,SN AN GE-13 is a new gasoline engine oil additive package designed for the efficient formulation of engine oils SM,SN grades. AN GE-13 is formulated by various kinds of the excellent components, such as highbased metal detergents, ashless dispersants, high-temperature antioxidants, etc. The specification of AN GE-13 could cover basic API SM,SN performances at the most efficient market treat rates. AN GE-13 could provide the oils with excellent high-temperature detergency, strong anti-oxidation and anti-corrosion performances. Excellent high-temperature anti-oxidation performance Good high-temperature detergency Fine anti-wear ability Fine energy conservation Good high-temperature performances Used in gasoline engine oils Recommended Dosage: 7.6% for SM Grade, 9.0% for SN Grade TBN, mgkoh/g 80 ASTM D2896 Nitrogen, wt% 1.0 ASTM D3228 Calcium, wt% 2.3 ASTM D4927 Zinc, wt%, 0.80 ASTM D4927 Phosphorus, wt%, min 0.80 ASTM D1091 Molybdenum,wt%,min 0.15 Spectrophotometer Packing: 200 liter metal drum (net weight: 190kg/drum) ventilated warehouses, lower than 55 C.
AN DE-3 Engine Oil Additive Package AN DE-3 is a new additive package for the efficient formulation of engine oils. AN DE-3 is specifically designed to provide basic API performances from CC/SC to CD/SF grades at the most efficient market treat rates without the need for a booster package. Anneng invented AN DE-3 formulated by various kinds of high-performance components, including detergents, dispersants, antioxidant and corrosion inhibitor, etc. Strong acid neutralization ability Good anti-oxidation performance Fine dispersity Excellent detergency Used in engine oils for CC/SC to CD/SF, recommended dosage as follows: API Multi/Mono Recommended Dosage (wt %) CC/SC Multi 3.0 CC/SC Mono 2.7 CC/SD Multi 3.7 CD/CF Multi 5.9 CD/CF Mono 5.4 CD/SF Multi 4.5 Flash point (COC) C, 165min ASTM D92 Calcium, wt%, 6.0min ASTM D4927 Zinc, wt%, 1.5min ASTM D4927 Phosphorus, wt% 1.15 min ASTM D1091 TBN, mg KOH/g, 183 ASTM D2896 Packing: 200 liter metal drum (net weight: 190kg/drum) ventilated warehouses, lower than 55 C.
AN DE-6 Additive Package for Diesel Engine Oil API CF-4 AN DE-6 is a diesel engine oil additive package designed to formulate diesel engine oils. The specification of AN DE-6 uniquely covers basic API CF-4 performances at the most efficient market treat rates without the need for a booster package.anneng invented AN DE-6 formulated with various kinds of high-performance compoments, including the metal detergents, macromolecule ashless dispersants and anti-oxidation additive packages. So AN DE-6 could provide the oils with excellent high-temperature detergency, dispersity, anti-oxidation, anti-corrosion and anti-wear performances. CF-4 grade diesel engine oils formulated by AN DE-6 can meet the requirement of the high-speed and four-stroke diesel engines, and has passed the bench test. The use of AN DE-6 can obviously save the oil cost and reduce the deposits on the piston, especially suitable for the heavy-load diesel locomotives running on the expressway. Good high-temperature detergency Good anti-oxidation performance Fine dispersity Good anti-wear performance Used in diesel engine oils with 9.6%, its viscosity grade could be SAE30, 40, 50, 15W40, and 20W40. By the evaluation, the oils could meet API CF-4 specifications. Used in high-speed and four-stroke diesel engines. Flash point (COC) C, 180 ASTM D92 Calcium, m% 4.0 ASTM D4927 Nitrogen, m% 0.46 ASTM D3228 Zinc, m%, 0.9 ASTM D4927 Phosphorus, m% 0.7 ASTM D1091 TBN, mg KOH/g, 110 ASTM D2896 Packing: 200 liter metal drum (net weight: 190kg/drum) ventilated warehouses, lower than 55 C.
AN DE-9 Additive Package for Diesel Engine Oil API CI-4 Anneng invented AN DE-9 formulated with various kinds of high-performance compoments,including detergents, dispersants, antioxidant/corrosion inhibitors, ashless antioxidants and antiwear additives, etc. The specification of AN DE-9 uniquely covers basic API CI-4 performances at the most economical treat rates without the need for a booster package. The diesel engine oils blended with AN DE-9 can largely reduce carbon deposition on the engine pistons and cylinder wears, and AN DE-9 has excellent performance in soot dispersing, antioxidation, corrosion proof and antiwear capacity. It can effectively protect the engines and prolong the engine service life. Good high-temperature detergency Good anti-oxidation performance Fine dispersity Good antiwear performance Used in diesel engine oils with the dosage 12.0%.By the evaluation, the oils could meet API CH-4, CI-4 specifications. Recommended Dosage: 12.0% for CI-4, CH-4 Grade Flash Point (COC) C, 165 ASTM D92 Calcium, m%, min 3.3 ASTM D4927 Nitrogen, m%, min 0.60 ASTM D3228 Zinc,m%, min 1.10 ASTM D4927 Magnesium, m%, min 0.15 ASTM D4927 Phosphorus, m%, min 0.9 ASTM D1091 TBN, mg KOH/g 105 ASTM D2896 Packing: 200 liter metal drum (net weight: 190kg/drum) ventilated warehouses, lower than 55 C.
AN3318 Additive Package for Two Stroke Motorcycle Engine Oil AN3318 is formulated by a variety of high-quality dispersants and detergents. The oils prepared from AN3318 could have excellent performances including detergency, lubricity, anti-rust property, preignition resistance abilities, and so on. With low ash content and outstanding performance of exhausting fume, AN3318 could protect the exhaust system from blocking. Air cooling two-stroke gasoline engine oils of FB, FC Grade blended by this product could meet JASO M345 FB, FC performance requirements. Good high-temperature detergency Good lubricity Fine preignition resistance ability Good anti-rust property Flash point (COC), 180 ASTM D92 Calcium m%, min 0.5 ASTM D4927 Nitrogen m%, min 0.6 ASTM D3228 Quality Grade Dosage Ratio(Fuel) FB 4% Air cooling two-stroke engines 35-50:1 (output volume is about 50ml) FC 5.7% Two-stroke engines (No requirements about the output volume ) 75-90:1 Packing: 200 liter metal drum (170kg/drum) ventilated warehouses, lower than 55 C.
AN3308 Four-Stroke Motorcycle Engine Oil Additive Package AN3308 has excellent high-temperature detergency and low-temperature dispersibility, fine anti-oxidation and anti-wear performances. This product could be suitable for blending high-grade EFI four-stroke motorcycle engine oils. The oils blended by 4.4/5.4% dosage could meet API SE/SF specification. Density(20 ),kg/m3 900-1000 ASTM D1298 Flash point (COC), 170min ASTM D92 Total base number, mgkoh/g 90min ASTM D2896 Zinc, m% 1.5min ASTM D4927 Calcium, m% 2.5min ASTM D4927 Nitrogen, m% 0.4min ASTM D3228 Quality Grade Dosage SE 4.4% SF 5.4% Good high-temperature detergency Good anti-oxidation property Good low-temperature dispersibility Fine anti-wear performance Packing: 200 liter metal drum (180kg/drum) ventilated warehouses, lower than 55 C.
AN3268 Multifunctional Engine Oil Additive Package for CF-4/SG AN3268 is high-grade and economical internal combustion engine oil additive package formulated by components with excellent performances. This product has strong acid neutralization capacity and excellent detergency performance. AN3268 could be soluble in base oils Group Ⅱ, Ⅲ,the oils with 6.0% dosage could meet API CF-4/SG standard,with different dosage, the oils could meet API CH-4,SJ performance requirements by adding some other additives. Strong acid neutralization capacity Excellent detergency Flash Point (COC), 170min ASTM D92 Total Base Number, mgkoh/g 105min ASTM D2896 Calcium, m % 3.0min ASTM D4927 Zinc, m % 1.9min ASTM D4927 Phosphorus, m% 1.5min ASTM D1091 Nitrogen, m% 0.35min ASTM D3228 Quality Grade Dosage(m/m) API CH-4 6.0%+1.5%T106+1.0%T115B API SJ 5.5%+1.5%T161 API CF-4/SG 6.0% API CE 4.5% API SF/CD 4.2% API CD 4.0% Packing: 200 liter metal drum (190kg/drum) ventilated warehouses, lower than 55 C.
Multifunctional Engine Oil Additive Package for CI-4/SL Grade Product Code: AN3267 Chemical: Formulated by components : Used in engine oils CI-4/SL Grade Packing: 200 liter metal drum Anneng Chemical Co.,Ltd. ventilated warehouses, lower than 55 C. AN3267 is a new kind of multifunctional engine oil additive package formulated by various components with excellent performances. This product has excellent high-temperature stability,detergency, antioxidation and anti-corrosion performances. AN3267 could efficiently prevent high-temperature and low-temperature deposits from generating. The oils blended by this product could meet API CI-4/SL performance requirements of high-grade diesel engine oils. Strong high-temperature stability Excellent detergency Good anti-oxidation performance Good anti-corrosion performance Flash point (COC), 180min ASTM D92 Total base number, mgkoh/g 70min ASTM D2896 Zinc, m % 0.9min ASTM D4927 Calcium, m % 2.3min ASTM D4927 Phosphorus, m% 0.7min ASTM D1091 Nitrogen, m % 0.5min ASTM D3228 Used in engine oils with 13.0%, its viscosity grade could be SAE 10W/30 10W/40 and 15W/40. By the evaluation, the oils could meet API CI-4/SL specifications. Storage: Keep the temperature not higher than 75 C. For long-term storage, the suggested temperature is lower than 45 C. The products can t be easily burned, exploded and have non-corrosiveness. There is no need for special security protection measures compared with the ordinary petroleum products in security, environmental protection and use aspects.
AN4981 Additive Package for Multifunctional Engine Oils AN4981 is a high-performance additive package designed for high-grade engine oils. AN4981 is formulated with various kinds of high-performance compoments, including detergent, high performance dispersant, anti-oxidant, anti-corrosion agent, etc.it meets the performance requirements for API CI-4/SL when used at 13.0 mass% in approved base stocks in the viscosity grades shown below. Recommended Dosage API Performance Level Base Oil SAE Viscosity Grade: Mass,% CI-4/SL API II/III 15W40 13.0 CI-4/SL API II/III 10W40 13.0 CI-4/SL API II/III 10W30 13.0 CH-4/SJ API II 15W40 13.0 CH-4/SJ API II 10W40 13.0 CH-4/SJ API II 10W30 13.0 CH-4/SJ API 15W40 13.0 CH-4/SJ API 10W40 13.0 CH-4/SJ API 10W30 13.0 Kinematic Viscosity(100 C),mm 2 /s 125 ASTM D445 TBN,mgKOH/g 71 ASTM D2896 Calcium,m% 2.24 ASTM D5185 Density@ 15 C, kg/m3 971 ASTM D4052 Flash Point Deg C 165 ASTM D93 Zinc, m% 0.98 ASTM D5185 Nitrogen, m% 0.66 ASTM D5291 Phosphorus, m% 0.88 ASTM D5185 Sulfated Ash,m% 9.1 ASTM D874 Packing and storage: Packing: Packed in 200 liter metal drum (net weight:195kg/drum). Storage: Please refer to SH/T0164 standard when stored, loaded and unloaded, oil blending. Keep the temperature not higher than 75 C. For long-term storage, the suggested temperature is lower than 45 C.
4th Generation Zinc-Free Railway Locomotive Engine Oil Additive Package Product Code: AN 3475 Chemical: Formulated by components : Used in Formulating railway locomotive oils Packing: 200 liter metal drum (net weight: 190kg/drum) ventilated warehouses, lower than 55 C. AN3475 is the designed to produce lubricants to meet the rigor requirements of use in the railway locomotive engines, this product is formulated by several kinds of detergents, dispersants, antioxidants and corrosion inhibitors,antiwear additives,etc. The oils blended by AN3475 could have excellent detergency, dispersity, antiwear and antioxidation performances. AN3475 also has better anticorrosion and antirust performances. This product can satisfy the needs of ND 4 4 high-horsepower locomotive diesel engine oils.an3475 could be extremely suitable for blending the 4th generation railway locomotive lubricants. : Use in railway locomotive engine oils, its recommended dosage is about 15.0% Typical Value Density at 15 C 980 ASTM D 4052 Flash point (COC) C, 170 ASTM D92 Viscosity at 100 C 50 ASTM D 445 Calcium, m% 3.6 ASTM D4927 Sulphated Ash,% 12.3 ASTM D 874 Nitrogen, m% 0.5 ASTM D3228 TBN, mg KOH/g 110 ASTM D2896 Packing: The product is packed in 200 liter metal drums (net weight: 190Kg/drum). Storage: Please refer to SH/T0164, for transportation, storage and oil blending. Keep the temperature not higher than 75. For long-term storage the suggested temperature is lower than 45. The dry, clean and ventilating warehouse is recommended.
Marine Cylinder Oil Additive Package Product Code: AN ME-05 Chemical: Formulated by components : Used in marine cylinder oils Packing: 200 liter metal drum (net weight: 190kg/drum) ventilated warehouses, lower than 55 C. AN ME-05 is marine cylinder oil additive package designed in order to meet extremely stringent specifications of marine cylinder oils, this product is formulated by many kinds of high-quality detergents, dispersants and so on. The use of AN ME-05 could provide marine cylinder oils with highly excellent performances, including excellent acid neutralization ability, fine detergency and dispersity property, good anti-wear and anti-oxidation performances, especially outstanding anti-corrosion and anti-rust properties. The actual use proves AN ME-05 could obviously protect marine cylinder for a long time. This product is extremely suitable for blending the marine cylinder oils of that TBN is 40 or 70. Excellent acid neutralization ability Good dispersity Good high-temperature detergency Anti-oxidation performance Good anti-wear performance Outstanding anti-corrosion and anti-rust properties 3 Density(20 ), kg/m 1080 ASTM D1298 Flash Point (COC), 180 ASTM D92 TBN, mgkoh/g 285 ASTM D2896 Nitrogen, m% 0.15 ASTM D3228 Calcium, m% 10.5 ASTM D4927 Kinematic Viscosity(100 C), mm 2 /s 128 ASTM D445 Recommended Dosage Used in marine cylinder oils, its recommended dosage as follows: Number Dosage,wt% Number Dosage,wt% 40 14 50 18 60 21 70 25 Any questions about this product, please contact us. Email:pingli@annechem.com Tel: 0086-24-31562057 Fax: 0086-24-25376521 Welcome to visit our Website: http://anhx.en.alibaba.com/, www.annengchem.com to know more!
Marine System Oil Additive Package Product Code: AN ME-25 Chemical: Formulated by components : Used in marine system oils Packing: 200 liter metal drum Anneng Chemical Co.,Ltd. ventilated warehouses, lower than 55 C. AN ME-25 is marine system oil additive package designed in order to meet extremely stringent specifications of marine system oils, this product is formulated by many kinds of high-quality detergents, dispersants, antioxidants and corrosion inhibitors, and so on. The use of AN ME-25 could provide marine system oils with highly excellent performances, including excellent acid neutralization ability, fine detergency and dispersity property, good anti-wear and anti-oxidation performances, especially outstanding anti-corrosion and anti-rust properties. This product could meet particular requirements of marine engine oils. Excellent acid neutralization ability Good dispersity Good high-temperature detergency Anti-oxidation performance Good anti-wear performance Outstanding anti-corrosion and anti-rust properties 3 Density(20 ), kg/m 1080 ASTM D1298 Zinc, wt% 1.0 ASTM D4927 TBN, mgkoh/g 145 ASTM D2896 Nitrogen, wt% 0.45 ASTM D3228 Calcium, wt% 5.4 ASTM D4927 Phosphorus, wt% 0.85 ASTM D1091 Recommended Dosage Used in marine cylinder oils, its recommended dosage as follows: The dosage of AN ME-25 generally recommended to blend marine system oils is 4.5%, and TBN could reach 6 mgkoh/g, meeting the technical requirements of marine system oils. Any questions about this product, please contact us. Email:pingli@annechem.com Tel: 0086-24-31562057 Fax: 0086-24-25376521 Welcome to visit our Website: http://anhx.en.alibaba.com/, www.annengchem.com to know more!
Marine Medium-speed Trunk Piston Engine Oil Additive Package Product Code: AN ME-45 Chemical: Formulated by components ventilated warehouses, lower than 55 C. AN ME-45 is a new marine medium-speed trunk piston engine oil additive package designed in order to meet extremely stringent specifications of marine medium-speed trunk piston engine oils, this product is formulated by many kinds of high-quality detergents, dispersants, and so on. The use of AN ME-45 could provide the oils with highly excellent performances, including excellent acid neutralization ability, fine detergency and dispersity property, good anti-wear and anti-oxidation performances, especially outstanding anti-corrosion and anti-rust properties. The oils formulated by AN ME-45 could protect the engines efficiently and improve the wear and rusting phenomena of the engines, keeping engines clean after long-term use. AN ME-45 is especially used for formulating 3012, 4012 oils. Excellent acid neutralization ability Good dispersity Good high-temperature detergency Anti-oxidation performance Good anti-wear performance Outstanding anti-corrosion and anti-rust properties Flash Point(COC), 180 ASTM D92 Zinc, m% 0.90 ASTM D4927 TBN, mgkoh/g 145 ASTM D2896 Nitrogen, m% 0.35 ASTM D3228 Calcium, m% 5.00 ASTM D4927 Recommended Dosage Used in marine medium-speed trunk piston engine oils, its recommended dosage: Number Dosage,wt% Number Dosage,wt% 12 8.5 20 14 30 20 40 27 Any questions about this product, please contact us. Email:pingli@annechem.com Tel: 0086-24-31562057 Fax: 0086-24-25376521 Welcome to visit our Website: http://anhx.en.alibaba.com/, www.annengchem.com to know more!
Additive Package for Diesel Engine Oil Product Code: AN3166B Chemical: Formulated by components : Used in Formulating Diesel Engine Oils Packing: 200 liter metal drum (net weight: 190kg/drum) Anneng Chemical Co.,Ltd. ventilated warehouses, lower than 55 C. AN3166B is a performance additive package designed for model year heavy duty diesel engines. It meets the performance requirements for API SM/CJ-4/CF when used at 16.2 mass %. AN3166B is formulated with various kinds of high-performance compoments, including detergent, high performance dispersant, anti-oxidant, anti-corrosion agent, and Nano Molybdenum fraction improver, etc. Its high temperature anti-oxidation property helps decrease high temperature sludge and deposits. It can effectively protect the engine and prolong the engine service life. Kinematic Viscosity(40 C), mm 2 /s 3196 ASTM D445 Kinematic Viscosity(100 C),mm 2 /s 175 ASTM D445 TBN,mgKOH/g 59 ASTM D2896 Calcium,m% 0.75 ASTM D5185 Density@ 15 C, kg/m3 949 ASTM D4052 Flash Point Deg C 182 ASTM D93 Zinc, m% 0.78 ASTM D5185 Magnesium, m % 0.52 ASTM D5185 Molybdenum, m % 0.028 ASTM D5185 Nitrogen, m % 0.65 ASTM D5291 Phosphorus, m % 0.71 ASTM D5185 Sulfated Ash,m% 6.1 ASTM D874 Sulfur,m% 1.91 ASTM D4294 Recommended Dosage: The dosage of AN3166B is 16.2%. Packing and storage: Packing: Packed in 200 liter metal drum(net weight:190kg/drum). Storage: Please refer to SH/T0164 standard when stored, loaded and unloaded, oil blending. Keep the temperature not higher than 75 C. For long-term storage, the suggested temperature is lower than 45 C. Any questions about this product, please contact us. Email:pingli@annechem.com Tel: 0086-24-31562057 Fax: 0086-24-25376521 Welcome to visit our Website: http://anhx.en.alibaba.com/, www.annengchem.com to know more!
PMA with Two Performances VII & PPD Product Code: AN LT-2 : Viscosity Index Improver and Pour Point Depressant Chemical Name: Polymethacrylate Packing: 200 liter metal drum (net weight:175kg/drum) Anneng Chemical Co.,Ltd. ventilated warehouses, lower than 55 C. AN LT-2 is a kind of the efficient viscosity index improver, and it is also the efficient pour point depressant for the lubricants with excellent performances. With a little dosage, this product can availably improve the viscosity index of the oils, and can also reduce the pour point at the same time. The product is transparently sticky liquid. And the dosage has no effect on the transparence of the oils. A little dosage of PMA can have the performance of keeping the lower pour point durably. It can be used for formulating many kinds of the oils such as aviation hydraulic oils, hydraulic transmission oils, gear oils, transformer oils, hydraulic oils of low pour point, NC machine hydraulic oils, special hydraulic oils and internal combustion engine oils and so on. Greatly improving the viscosity index Efficiently reducing the pour point Excellent low-temperature performance Use in formulating aviation hydraulic oils, fluid drive oils, gear oils, transformer oils, hydraulic oils of low pour point, NC machine hydraulic oils, special hydraulic oils and internal combustion engine oils and so on. Its recommended dosage is 0.3-0.5%. Flash Point (COC), 165 ASTM D92 Low-temperature performance -60 Enterprise Standard Thicken ability, mm2/s 22-40 SH/T0566 Shear Stability(40 C),% 30 Enterprise Standard
AN LT-12, LT-12A : Viscosity Index Improver Chemical Name: Ethylene-propylene Copolymer (OCP) Packing: 200 liter metal drum (net weight:170kg/drum) ventilated warehouses, lower than 55 C. The series of ethylene-propylene copolymer (OCP) including AN LT-12, LT-12A, LT-13 and LT-14 are efficient viscosity index improvers. AN LT-12, LT-12A have excellent thermal stability and chemical stability, and could also increase the adhesive properties and viscosity index of lubricating oils, preventing dripping and splashing during operation. This reduces operational cost and the risk of environmental contamination. AN LT-12 and LT-12A also have good compatibility with pour point depressants. This product is primarily used in formulating multi-grade gasoline engine oils. Strong thickening capacity Good chemical stability Excellent thermal stability Greatly improving the viscosity index Good shear stability and adhesion promotion ability Good compatibility with pour point depressant Use in formulating multi-grade gasoline engine oils, its recommended dosage is 5-10%. Typical Value Item Test Method AN LT-12 AN LT-12A Kinematic Viscosity(100 ),mm 2 /s 1000 4500-6000 ASTM D445 Density(20 ), kg/m 3 860-880 860 ASTM D1298 Flash Point (COC), 180 175 ASTM D92 Shear Stability Index(SSI),% 38 38 ASTMD2603 Thickening Ability, mm 2 /s 6.5 15 SH/T0566
Organic Molybdenum Compound (Without N) Product Code: AN LN-1 Chemical: Molybdenyl Dialkyl Dithiophosphate : Used in the gear oils and engine oils as antiwear additive and antioxidant Packing: 200 liter metal drum (net weight: 200kg/drum) ventilated warehouses, lower than 55 C. AN LN-1 is a new technically advanced anti-wear additive in order to meet the requirements of CF-5 vehicle engine oils that Phosphorus content should be within 0.05%. AN LN-1 could provide the oils with excellent anti-wear, friction-reduction, antioxidation and noncorrosive performances. Organic Molybdenum also has good synergistic effects with other EP antiwear additives. Without Nitrogen element, it could reduce its content in lubricating oils. With the small dosage, AN LN-1 could perform excellent anti-wear and friction-reduction properties. This product could be used in internal combustion engine oils, industrial oils, gear oils and lubricating grease. Excellent anti-wear performance Good friction-reduction performance Good antioxidation ability Noncorrosive performance to metal Used in internal combustion engine oils, industrial oils, gear oils and lubricating grease. Its recommended dosage is 0.2-1.0% Density(20 ), g/cm3 0.9-1.1 ASTM D1298 Kinematic Viscosity (100 C), mm 2 /s 18-35 ASTM D445 Molybdenum mt% 6.5-10.5 Spectrophotometry Phosphorus, m% 2 ASTM D1091 Sulfur,m% 6 ASTM D129 Flash Point (COC), C 160 ASTM D92
High-Temperature Antioxidant Product Code: AN HTAO-1 Component: Diphenylamine Antioxidant Packing: 200 liter metal drum (net weight: 200kg/drum) ventilated warehouses, lower than 55 C. Anneng Chemical Co.,Ltd. AN HTAO-1 is a technically advanced antioxidant providing oils with excellent antioxidation performance and fine thermal stability at high temperature, particularly its excellent long-lasting antioxidation performance, especially to inhibit the oxidation of the oils in post stage. AN HTAO-1 also has fine compatibility, when used with phenylamine and hindered phenolic antioxidant, the antioxidant effect could be enhanced. AN HTAO-1 could perform its function by reacting with the free radicals generated by its oxidation and prevent further oxidative decomposition of the lubricating oils, preventing engine parts from corroding, accelerated wear effects, sludge and deposit formation. With the use of AN HTAO-1, the life of automotive lubricants could be extended and vehicular emissions could be greatly reduced. AN HTAO-1 designed helps fuels and lubricants push the boundaries of the speed, strength, cleanliness, and durability. Excellent long-lasting antioxidation performance at high temperature Fine compatibility with other antioxidants Excellent thermal stability at high temperature Used in high-grade engine oils, heat conducting oils, hydraulic oils, lubricating grease, fuel oils, compressor oils and turbine oils.recommded Dosage: 0.25%-0.5%. Used in the rubber. Kinematic Viscosity(40 ),mm 2 /s 100-135 ASTM D445 TBN, mgkoh/g 100-150 ASTM D2896 Nitrogen, mt% 3.8 ASTM D3228 Diphenylamine,% 1.0 Chromatography
AN DP-2&AN DP-2A : Antioxidant and Corrosion Inhibitor Chemical Name: Zinc Butyl Octyl Primary Alkyl Dithiophosphate(ZDDP) Packing: 200 liter metal drum (net weight: 200kg/drum) ventilated warehouses, lower than 55 C. AN DP-2 is an extremely potent, cost-effective antioxidant and corrosion inhibitor and deemed as the essential in today s automotive lubricating oils.anneng could manufacture this product with higher Zinc content(that is average 8.5-10.0%) in accordance to our customers needs. AN DP-2 could provide the oils with excellent antioxidation, anticorrosion performances and strong extreme pressure, anti-wear abilities. AN DP-2 can efficiently prevent the engine bearings from corrosion, and also prevent the viscosity of the oils from increasing due to the high-temperature oxidation. AN DP-2 is recommended for use in blending industrial lubricating oils such as gear oils, hydraulic oils, etc. It can be used for blending middle-grade engine oils combined with detergents and dispersants. Good compatibility with other additives Good oil solubility, light color Excellent antioxidation and anticorrosion performances Strong extreme pressure and anti-wear abilities Use in industrial lubricating oils including gear oils, hydraulic oils, etc Use in middle-grade engine oils Recommended dosage:0.5-3.0% Typical Value Item Test Method AN DP-2 AN DP-2A 3 Density(20 ), kg/m 1080-1130 1080-1150 ASTM D1298 Flash Point (COC), 180 185 ASTM D92 Sulfur, wt% 12.0-16.0 16.2 ASTM D129 Phosphorus, wt% 6.0-8.5 7.8 ASTM D1091 Zinc, m% 8.0-9.5 10.0 ASTM D4927
AN DP-3 Anneng Chemical Co.,Ltd. : Antioxidant and Corrosion Inhibitor Chemical Name: Zinc Dioctyl Primary Alkyl Dithiophosphate (ZDDP) Packing: 200 liter metal drum (net weight: 200kg/drum) ventilated warehouses, lower than 55 C. AN DP-3 is an efficient antioxidant and corrosion inhibitor, belonging to the series of ZDDP products, and also deemed as essential in today s automotive lubricating oils. AN DP-3 could provide the oils with excellent antioxidation, anticorrosion performances and strong extreme pressure, anti-wear abilities. AN DP-3 has excellent thermal stability, oil solubility, and good compatibility with other additives, especially better demulsification performance compared with AN DP-2. AN DP-3 is recommended for use in formulating hydraulic oils with other components. AN DP-3 can be used for formulating high-grade diesel engine oils combined with detergents (Calcium Sulfonate) and dispersants (Polyisobutylene Succinimide products). Excellent thermal stability Better demulsification performance Good compatibility with other additives Good oil solubility, light color Excellent antioxidation and anticorrosion performances Strong extreme pressure and anti-wear abilities Use in hydraulic oils Use in high-grade diesel engine oils, its recommended dosage is 0.5-3.0% Flash Point (COC), 180 ASTM D92 Sulfur, m% 12.0-18.0 ASTM D129 Phosphorus, m% 6.5-8.8 ASTM D1091 Zinc, m% 8.0-10.5 ASTM D4927 Thermal Decomposition Temperature, 225 SH/T0561
AN LA-2 : Antioxidant Chemical Name: Mixture Liquid Hindered Phenol Packing: 200 liter metal drum (net weight: 180kg/drum) ventilated warehouses, lower than 55 C AN LA-2 is pale yellow liquid. It has the good oil solubility, it couldn t be soluble in water or caustic soda, and it could not fade for the long-term period. AN LA-2 is a lubricant additive component of mixture liquid hindered phenol antioxidant. It provides oils with excellent antioxidation and antigum performance. It has the good anti-oxidation performance similar to AN LA-1 (2,6-Di-tert-butyl-p-cresol). This product is widely used for blending fuel oils and lubricants. It can be used as the anti-aging agent of rubbers and plastics. It can be used alone or used with other additives. Excellent anti-oxidation performance similar to AN LA-1 antioxidant It can't fade for the long-term storage Belonging to the mixed shielding phenol antioxidant Good oil solubility Used for fuel oils and lubricating oils Used for the industrial lubricating oils as antioxidant, such as turbine oils, transformer oils, hydraulic oils and machine oils, etc Used for petrochemical products such as rubbers and plastics as the anti-aging additive ITEM Typical value TEST METHOD 2,6-tert-butyl phenol, m% 55.0 Chromatography 2,6-Di-tert-butyl-p-cresol, m% 25.0 Chromatography Flash Point (PMCC), C 96 ASTM D93 Free phenol, m% 0.40 chromatography Pour Point, C -25 ASTM D97 Copper Corrosion (100 C, 3h), Grade 1b ASTM D130 Recommended Dosage: 0.1-1.0%
AN LE-21 Anneng Chemical Co.,Ltd. : Extreme Pressure Antiwear Additive Chemical Name: Sulfurized Isobutylene Packing: 200 liter metal drum (net weight: 200kg/drum) ventilated warehouses, lower than 55 C. AN LE-21 is an extremely effective EP antiwear additive and deemed as main component in today s gear oils. With high content of active Sulfur, AN LE-21 could provide the oils with excellent EP and load-carrying properties. It is useful in protecting equipment under shock-load conditions and working surfaces which experience high loads. AN LE-21 has good oil solubility, light color, less corrosion for the metals and fine compatibilities with the compounds containing phosphorus. AN LE-21 can be widely used for formulating middle-grade and top-grade automotive gear oils and industrial gear oils, the metal processing oils, drilling machine oils, etc. As AN LE-21 is an excellent source of controlled activity sulfur. It could be used in lubricating grease applications where EP and load-carrying capabilities are required. Excellent EP antiwear performance High sulfur content Low reactivity to copper Less corrosion for the metals Fine compatibilities with the compounds Ashless Excellent booster for FZG, Four ball and other EP tests Used in automotive gear oils and industrial gear oils, the metal processing oils, drilling machine oils, lubricating grease, etc.its recommended dosage is 1.5-5.0%. Flash Point (COC), C 100 ASTM D92 Sulfur, m% 40-46 ASTM D129 Cu-strip Corrosion (121 C, 3h), rating 3 ASTM D130 Four Ball Test,PB(N) 780 ASTM D2783 Four Ball Test,PD(N) 3920 ASTM D2783
Sulfur Nitrogen Phosphorus Additive Sulfur Nitrogen Phosphorus Additive is a new ashless lubricating oil additive. This product has excellent anti-corrosion, and excellent thermal stability, anti-oxidation and anti-wear performances. This product can be used for blending all kinds of the gear oils, gasoline and diesel engine oils, anti-wear hydraulic oils, rail oils. Besides, AN3019 could be used in dual fuel engine oils, replacing ZDDP which contain Zinc and high content of sulfur and phosphorus. Typical Value Appearance Chemical Light yellow fluid Thiophosphoric Acid Amine Ester Density(15.6 ), g/cm 3 0.95 Flash Point(Open Cup) 170 S% 2.4 P% 1.2 N % 1.6 Solubility Soluble in mineral oils and various kinds of synthetic oils, not soluble in water Packing and storage: Packing: Packed in 200 liter metal drum (net weight:190kg/drum). Storage: Keep the temperature not higher than 75 C. For long-term storage, the suggested temperature is lower than 45 C. The products can t be easily burned, exploded and have non-corrosiveness. There is no need for special security protection measures compared with the ordinary petroleum products in security, environmental protection and use aspects.
Antirust Oil Additive Package Product Code: AN RP-1 Chemical: Formulated by components : Used in antirust oils Packing: 200 liter metal drum (net weight: 180kg/drum) ventilated warehouses, lower than 55 C. AN RP-1 is antirust oil additive package designed to prevent the metal from atmospheric corrosion and rust in high humidity condition. The assessment of humidity cabinet test proves that the oils blended by AN RP-1 could efficiently provide the ferrous metal such as carbon steel and cast iron with excellent performances. AN RP-1 is formulated by many kinds of technically advanced antirust components, performing dewatering and rust prevention properties. It could be used in the rust protection of interprocess, transportation, indoor medium-term and long-term sealing. It is dark brown liquid. It could be used in dewatering and replacement-type antirust oils, sealing antirust oils, thin film antirust oils. AN RP-1 belongs to environment-friendly antirust oil additive without Barium element. Excellent antirust performance for metal Excellent antirust ability for ferrous metal Good dewatering property Good replacement performance Not containing Barium element, belonging to environment-friendly antirust oil additive Flash Point (COC), >160 ASTM D92 damp heat test(a grade),h >240 GB/T2361 salt spray test(a grade),h >24 SH/T0081 Steeping in brine >20 SH/T0025 Recommended Dosage Used in dewatering and replacement-type antirust oils, its recommended dosage is 8% AN RP-1 with 10% low-viscosity mineral oils and 82% 120# solvent oils or kerosene. Used in thin film antirust oils, its recommended dosage is 8%-25%.
Antirust Additive (Component) Product Code: AN LR-2 Chemical Name: Sodium Petroleum Sulfonate : Used in Formulating Cutting Emulsified Oils and Antirust Grease Packing: 200 liter metal drum (net weight: 190kg/drum) Anneng Chemical Co.,Ltd. ventilated warehouses, lower than 55 C. AN LR-2 has the excellent hydrophilicity and good corrosion inhibition performance for the metals. AN LR-2 also has good antirust performance and excellent emulsification ability. The product is primarily used in formulating cutting emulsified oils and antirust grease. According to the requirements of our customers, Anneng has invented Antirust Additive with more than 60% content of Sodium Petroleum Sulfonate named AN LR-2A. Excellent hydrophilicity Good corrosion inhibition performance Good antirust performance Excellent emulsification ability Use in formulating cutting emulsified oils Use in antirust grease Its recommended dosage:3-15% Sodium Sulfonate, m% 45 Enterprise Standard Inorganic Salt, m% 0.35 Enterprise Standard Mechanical impurities, m% 0.20 ASTM D2273 Water, m% 1.0 ASTM D6304 PH Value 7-8 PH Value Strips Re commended Dosage: 3-15%
Anneng Chemical Co.,Ltd. Pour Point Depressant Product Code: AN LP-3 : Used in engine oils and industrial oils Chemical Name: Poly α Olefin Packing: 200 liter metal drum (net weight:165kg/drum) ventilated warehouses, lower than 55 C. The series of Poly α Olefin products are very efficient pour point depressants. AN LP-3 could greatly reduce the pour point of the lubricating oils, and provide the oils with excellent low-temperature performances, especially suitable for light lubricating oils and also for heavy lubricating oils. AN LP-3 has small viscosity and excellent anti-shear performance, it could increase the viscosity index of the oils. Its color is light, it can be used in deep-dewaxing lubricating oils such as the multistage internal combustion engine oils, hydraulic oils, gear oils, stream turbine oils, etc. This product can show the stronger performances used with some other PPDs. AN LP-3 has the less molecular weight and the good shear stability. It is widely used for internal combustion engine oils and hydraulic oils. Greatly reducing the pour point Excellent low-temperature performances Increasing the viscosity index of the oils Good shear stability Use in deep-dewaxing lubricating oils such as the multistage internal combustion engine oils, hydraulic oils, gear oils, stream turbine oils, etc. Its recommended dosage is 0.2-1.0%. Flash Point (COC), 120 ASTM D92 Kinematic Viscosity, (100 C), mm2/s 3000 ASTM D445 PPD Degree, C 16 ASTM D97 Ash,% 0.20 GB/T268
TBN400 Synthetic Calcium Sulfonate Anneng Chemical Co.,Ltd. Product Code: T106D : Used in lubricating oils as detergent Packing: 200 liter metal drum (net weight: 200kg/drum) ventilated warehouses, lower than 45 C. T106D is prepared from long-chain linear alkylbenzene sulfonic acid. This alkaline calcium sulfonate T106D can neutralize the organic acids generated by the lubricating oils and fuel oils oxidized, efficiently preventing condensation reaction from happening further. It can remove the coatings and deposit, increasing solubility and making them disperse in the lubricants. The recommended dosage is 0.5-3%. This product is also the main additive in the marine engine oils. Strong acid neutralization ability Good antirust performance Excellent detergency Good dispersity Good hydrolysis stability Good water tolerance Used in engine oils for each grade, suitable for formulating marine oil additives Used in industrial lubricants as the antirust additive Kinematic Viscosity (100 C), mm 2 /s 40-150 ASTM D445 Calcium, m % 15.0 ASTM D4951 Sulfur, m % 1.2-1.55 ASTM D129 Total base number, mgkoh/g 400 ASTM D2896 Chroma No. 7.0 ASTM D1500 JTU 250 ASTM D6181 Storage: Keep the temperature not higher than 75 C. For long-term storage, the suggested temperature is lower than 45 C. The product should be avoiding from strong oxidants. The products can t be easily burned, exploded and have non-corrosiveness. There is no need for special security protection measures compared with the ordinary petroleum products in security, environmental protection and use aspects.