PRICE LIST 2012 TOC / Introduction. DORMA Glas. DORMA Glas. Glass Door & Wall Hardware. Price List 2012

TOC / Introduction DORMA Glas Glass Door & Wall Price List 202

TOC / Introduction DORMA Glas Price List 202 Glass Door and Wall Table of Contents Contact Information Finish Codes Product Shipping Schedule Warranty Policy Terms of Sale iii iv v vi vi Section A, Dri-Fit Sidelite Rails and Channels A- to A-7 Section B B- to B-8 Section C and Accessories C- to C-6 Section D D- to D-6 Section E E- to E-8 Section F Housings & Handles for Interior Tempered Glass Doors F- to F-2 Section G Sliding Systems G- to G-25 Section H MANET Pivoting/Sliding & RSP 80 Sliding Door Systems H- to H-22 Section I Panic Devices I- to I- Exit MANET Slidiing Handles and INTRO-ii

TOC / Introduction Contact Information DORMA Glas DORMA Drive, Drawer AC Reamstown, PA 7567-04 Office Hours Monday Friday 8:00 AM to 4:0 PM E.S.T. Phone Toll Free (40) 92-0890 Fax (40) 92-060 Email regarding orders dormaglasorders@dorma-usa.com Email requesting quotes dormaglasestimates@dorma-usa.com Revision History 2/2/2 Page G-0 updated with correct diagram of DRS-20 Ceiling Mount/Two Sliding Panels Exit MANET Slidiing Handles and INTRO-iii

TOC / Introduction Finish Codes Anodized Aluminum Parts DORMA Glas Finish # Description Code BHMA Code Closest US Code Mill 00 ML 79 US27 Clear 0 CL 628E US28 Satin Bronze 05 SSB Similar to Steel 07/ SSS Aluminum 4 EV- Dark Bronze 08 DB 695 Black 09 BK 69/7 US9 Polished Chrome 22 ARC Special Anodized 99 SA Brass & Painted Brass Parts Polished Brass with Lacquer 502 PBL 605E US Polished Brass without Lacquer 50 PB Mill Brass N/A MB Satin Brass without Lacquer 599 SB Steel Parts Satin Chrome Plated 500 SC 626E US26D Polished Chrome Plated 50 PC 625E US26 Satin Steel 700 SS 60E US2D Polished Steel 70 PS 629E US2 Mill N/A MS Special Finish 999 SF Bronze Parts Primer 4 PR Satin Bronze without Lacquer 600 SBZ 62E US0 Polished Bronze without Lacquer 60 PBZ 6E US9 Oxidized Bronze Oil Rubbed 602 0B 6E US0B NOTES Codes with the suffix E added to the BHMA 600 number designate the appearance of the finish, regardless of the base materials. For example, 605 defines a polished brass base material, but 605E can be any base material, like steel or brass, that is finished to provide the appearance of polished brass. Finish # is our numerical representation within the part number. Exit MANET Slidiing Handles and Description Code is our alpha representation within the part number. Please consult factory for special finishes. INTRO-iv

TOC / Introduction Product Shipping Schedule Key Orders received by 2:00 PM Eastern Time Mon. Tues. Wed. Thurs. Fri. Non-Fabricated items ship in business day: Tues. Wed. Thurs. Fri. *Mon. Standard Fabricated and Non-Standard Fabricated items ship in up to business days: Thurs. Fri. *Mon. *Tues. *Wed. 5 Custom Fabricated items ship in up to 5 business days: *Mon. *Tues. *Wed. *Thurs. *Fri. Special Fabricated/Finishes and Special Order items: Ship in up to 5 weeks. *Indicates the following week. NOTE: Above fabrication schedule is based on 0 fabrication items per order. For fabrication orders over 0 per order, please contact Customer Service for a custom schedule. NON- FABRICATED STANDARD FABRICATED NON-STANDARD FABRICATED 5 CUSTOM FABRICATED SPECIAL FABRICATED /FINISHES Universal / EA and Accessories in limited finishes RTS88 and BTS80 Accessories in limited finishes Handles (excluding TG Handles), etc. Door Rails @ 24" to 50" finished size with endcaps (standard pivot centers with Easi-Align, hardware, and finishes). RP 4-/8" or 4-/2" @ 6" and 72" complete with DORMA RTS Closer(s) installed (standard 2-/4" pivot center and finishes). NOTE: All headers are shipped with closers installed unless requested otherwise. DRS -5/8", 4", 6", and 0" Dri-Fit TM sidelite rails any length (Miters excluded). U-Channels and Dri-fit Channels any length; mechanical channel any length; miscellaneous extrusions any length (miters excluded). RS-20 systems (standard hardware and stock finishes to product line). Excludes Syncro. RP fabricated to special sizes (standard 2-/4" pivot centers and finishes). NOTE: All headers are shipped with closers installed unless otherwise requested. DRS-20 systems (standard hardware and finishes to product line). Miters (, RP, Sidelites and U-Channel) at any length and any angle. EMSL 2765 Shear Locks installed in and/or RP, standard or non-standard lengths apply. Special pivot centers anything other than 2-/4" pivot ( and/or RP ). Vertical Stile, Floating Header, Offset Pivots Orders that require hardware preparation other than DORMA scheduled on a project basis. Up to three () weeks. DORMA Wall requires up to five (5) weeks. Special finish items require an additional two (2) weeks more than the above lead times (e.g. Brass, Bronze, US0B). Painted finishes scheduled per job with paint manufacturer and code. No returns/no cancellations accepted on special finish items. SPECIAL ORDER Special Order Items require up to (5) weeks. No returns/no cancellations accepted on special order items. NOTES UPS will ship a maximum of 0 united inches (length + circumference) @ 08" maximum length. Accelerated shipping is available upon special request. DORMA Glas is committed to using the most cost-efficient method of shipping orders unless specified otherwise. Orders will not ship the same day without justifiable circumstances; if authorized, they must ship Next Day service. DELIVERY Delivery dates are contingent upon conditions at the time of acknowledgement and are subject to delays caused by strikes or other labor problems, shortages of materials, equipment failure, fire, flood, or other acts of God, or causes beyond our control. We will not be liable under any circumstances for consequential damages arising from such delays. SPECIAL PACKAGING REQUESTS Customer-requested special packaging requirements may add additional charges and/or extend lead time. FREIGHT POLICY All goods are shipped F.O.B. Reamstown, Pennsylvania. Shipments will be prepaid and charges added to the invoice for customers with accounts and COD for orders under $,000.00 net for nonaccount holders. Freight charges are prepaid and allowed on any one order to one destination (Mainland U.S.A) by carrier of our choice, for orders with net price of $5,000.00 minimum. Exit MANET Slidiing Handles and INTRO-v

TOC / Introduction Warranty Policy All DORMA closers that are BMHA certified to ANSI A56.4 Grade Standard for Door Controls-Closers are covered by a 25-year warranty. This includes BTS Series concealed floor closers, except where noted. All fire/life safety products that are BHMA certified to ANSI A56.5 Grade Standard for Closer-Holder Devices carry a 25-year warranty on the closer mechanism and a 2-year warranty on any electrical or electronic components. The RTS Series overhead-concealed closers carry a 5-year warranty. The ED400-IG Low-Energy operators carry a 2-month warranty on mechanical as well as electrical or electronic components. All other products not mentioned above carry a 2-year warranty. The above stated warranties cover products that are manufactured after August 986. All closers are stamped with a coded date of manufacture by calendar week then year, i.e.8/09 = week of April 26, 2009. Terms of Sale PRICES All prices shown are in U.S. Dollars and are subject to change without notice. Prices on acknowledged orders are firm for shipment within three months of order date. All other orders subject to price in effect at time of shipment. TERMS % 0 Days, Net 0. MINIMUM ORDER $50.00 net minimum invoice. ORDERS We reserve the right to decline an order when the type or quantity of goods, or credit status of the buyer is unsatis - factory to us. All DORMA Glas products including Universal, TENR, RP, DRS, RS-20, DRS-20, AGILE 50, MANET, MAGNEO, RSP80, BEYOND, VISUR, and Exit are covered by a 2-year warranty. All goods sold are warranted to be free from defects in material and workmanship, the foregoing comprises seller s sole and entire warranty. All other warranties, written or verbal, expressed or implied, and including but not limited to warran - ties of merchantability or fitness for intended purpose are expressly excluded. Seller s sole obligation under these warranties, during the period after date of manufacture as listed above, shall be to issue credit, repair or replace any items or part thereof which is proved to be other than as warranted. Seller shall have the sole right to deter - mine whether such parts shall be repaired or replaced or whether credit shall be issued. No allowance shall be made for any labor charges for replace ment of parts, adjustments or repairs, or any other work. In no event shall seller be liable for collateral or consequential damages. ACKNOWLEDGMENTS Acknowledgements are exact copies of the manufacturing order and should be checked upon receipt. If acknowledge - ment is incorrect, please notify DORMA Glas Customer Service Department immediately. CANCELLATIONS & CHANGES A cancellation or change charge will apply if any costs for material or labor have been incurred prior to notification by customer of the cancellation or change. If goods are claimed to be other than as warranted, seller, upon notice promptly given, will either examine the goods at their site or issue shipping instructions for return to seller (transportation costs prepaid by buyer). These warranties shall not extend to any goods or parts thereof which have been subjected to misuse or neglect, damage by accident, rendered defective by reason of improper installation or by the performance of repairs, modifications or attachment to other products outside of seller s plant. Because DORMA has no control over conditions under which its products are used, DORMA specifically does not warrant the adequacy or sufficiency of any device or recommendations given to buyer. Nor does DORMA warrant that every DORMA product complies with every code, standard or regulation in every community except as specifically stated in a published DORMA catalog or in writing by an officer of the company. Nor is DORMA bound by the terms of buyer s agreements with other parties. RETURNED GOODS Goods determined defective within the terms of our warranty may be returned for replacement. Goods returned due to any other factors are subject to a 25% restocking fee. For all returns contact the factory for a Return of Goods Authorization number (RGA). All returns must bear the RGA number provided. Unauthorized returns will not be accepted. The complete RGA policy is available upon request. Exit MANET Slidiing Handles and INTRO-vi

/ DriFit Section A and Dri-Fit Sidelite Rails Product Description Page -5/8" Square and Tapered Door Rails A- to A-5 4" Square Door Rails A-6 to A-7 6" Square Door Rails A-8 to A-9 0" Square Door Rails A-0 to A- Dri-Fit Sidelite Rails -5/8" Square and Tapered, 4" Square Glazing A-2 Dri-Fit Sidelite Rails 6" and 0" Square Glazing A- U-Channels Glazing and Dri-Fit U-Channels A-4 DRS Accessories DRS Rail Covers and Extrusions A-5 DRS Accessories DRS Endcaps A-6 Dri-Fit Vertical Stiles A-7 NOTE: Refer to Section E for. Exit MANET Slidiing Handles and A-

/ DriFit Exit MANET Slidiing Handles and A-2

/ DriFit -5/8" Square and Tapered Top Door Rails for Doors Type P for 24" to 50" F.D.S. Model Top Rails with 928.006 Arm Type P Item Number Description U/M Clear 0 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze Pol. 60 Satin 600 886 225.042 /8" (0 mm) Ea. $208 $25 $405 $2 $482 225.00 /2" (2 mm) Ea. $208 $25 $405 $2 $482 Square 225.042 5/8" (5 mm) Ea. $28 $245 $44 $40 $489 225.05 /4" (9 mm) Ea. $28 $245 $44 $40 $489 225.044 /8" (0 mm) Ea. $208 $25 $405 $2 $482 225.02 /2" (2 mm) Ea. $208 $25 $405 $2 $482 n/a 5/8" (5 mm) Tapered n/a /4" (9 mm) Top Rails with 904.60 Arm Type P 55.0 225.042 /8" (0 mm) Ea. $84 $2 $82 $00 $459 Square 225.00 /2" (2 mm) Ea. $84 $2 $82 $00 $459 225.042 5/8" (5 mm) Ea. $94 $22 $4 $6 $466 225.05 /4" (9 mm) Ea. $94 $22 $4 $6 $466 225.044 /8" (0 mm) Ea. $84 $2 $82 $00 $459 225.02 /2" (2 mm) Ea. $84 $2 $82 $00 $459 n/a 5/8" (5 mm) Tapered n/a /4" (9 mm) Rails with 904.09 Arm Type P 55.9 225.042 /8" (0 mm) Ea. $220 $247 $48 $5 $494 225.004 /2" (2 mm) Ea. $220 $247 $48 $5 $494 225.042 5/8" (5 mm) Ea. $20 $257 $446 $52 $50 Square 225.054 /4" (9 mm) Ea. $20 $257 $446 $52 $50 225.044 /8" (0 mm) Ea. $220 $247 $48 $5 $494 225.024 /2" (2 mm) Ea. $220 $247 $48 $5 $494 n/a 5/8" (5 mm) Tapered n/a /4" (9 mm) Standard or Non-Standard Fabricated; lead time up to business days. Exit MANET Slidiing Handles and NOTES F.D.S. = Finished Door Size including endcaps. Specify glass thickness and hardware when ordering /8" (0 mm) and 5/8" (5 mm) rails. Must specify overall rail size and finish when ordering all rails. Prep/Install Charge for EMSL 2765 Shear Lock Armature $60.00 net each. Prep/Install charge for other manufacturer s hardware is $0 net each, except for shear locks and magnetic locks, which are $80 net each. A-

/ DriFit -5/8" Square and Tapered Bottom Door Rails for Doors Type P and Type BP with Locks, for 24" to 50" F.D.S. Model Bottom Rails w/ 928.055 Pivot & Lock Square Tapered Item Number Description U/M Type P & BP Clear 0 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze Pol. 60 Satin 600 8852 225.042 /8" (0 mm) Ea. $27 $244 $45 $ $492 225.005 /2" (2 mm) Ea. $27 $244 $45 $ $492 225.042 5/8" (5 mm) Ea. $227 $254 $44 $49 $499 225.055 /4" (9 mm) Ea. $227 $254 $44 $49 $499 225.044 /8" (0 mm) Ea. $27 $244 $45 $ $492 225.025 /2" (2 mm) Ea. $27 $244 $45 $ $492 n/a n/a 5/8" (5 mm) /4" (9 mm) Bottom Rails w/ 904.020 Insert & Lock Type P & BP Square Tapered 55. 225.042 /8" (0 mm) Ea. $202 $20 $400 $8 $477 225.007 /2" (2 mm) Ea. $202 $20 $400 $8 $477 225.042 5/8" (5 mm) Ea. $2 $240 $429 $5 $484 225.057 /4" (9 mm) Ea. $2 $240 $429 $5 $484 225.044 /8" (0 mm) Ea. $202 $20 $400 $8 $477 225.027 /2" (2 mm) Ea. $202 $20 $400 $8 $477 n/a n/a 5/8" (5 mm) /4" (9 mm) Bottom Rails w/ 227.002 Arm & Lock Type P & BP Square Tapered 7422 225.042 /8" (0 mm) Ea. $246 $27 $44 $6 $520 225.009 /2" (2 mm) Ea. $246 $27 $44 $6 $520 225.042 5/8" (5 mm) Ea. $256 $28 $472 $78 $527 225.059 /4" (9 mm) Ea. $256 $28 $472 $78 $527 225.044 /8" (0 mm) Ea. $246 $27 $44 $6 $520 225.029 /2" (2 mm) Ea. $246 $27 $44 $6 $520 n/a n/a 5/8" (5 mm) /4" (9 mm) Standard or Non-Standard Fabricated; lead time up to business days. Exit MANET Slidiing Handles and NOTES F.D.S. = Finished Door Size including endcaps. Specify glass thickness and hardware when ordering /8" (0 mm) and 5/8" (5 mm) rails. Must specify overall rail size and finish when ordering all rails. Prep/Install charge for other manufacturer s hardware is $0 net each, except for shear locks and magnetic locks, which are $80 net each. A-4

/ DriFit -5/8" DRS Square and Tapered Bottom Door Rails for Doors Type P and Type BP without Locks, for 24" to 50" F.D.S. Model Bottom Rails w/ 928.055 Pivot Type P & BP Square Tapered Item Number Description U/M Clear 0 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze Pol. 60 Satin 600 8852 225.042 /8" (0 mm) Ea. $85 $22 $82 $00 $459 225.006 /2" (2 mm) Ea. $85 $22 $82 $00 $459 225.042 5/8" (5 mm) Ea. $95 $222 $4 $7 $466 225.056 /4" (9 mm) Ea. $95 $222 $4 $7 $466 225.044 /8" (0 mm) Ea. $85 $22 $82 $00 $459 225.026 /2" (2 mm) Ea. $85 $22 $82 $00 $459 n/a n/a Bottom Rails w/ 904.020 Insert Type P & BP Square Tapered 5/8" (5 mm) /4" (9 mm) 55.0 225.042 /8" (0 mm) Ea. $70 $97 $68 $285 $445 225.008 /2" (2 mm) Ea. $70 $97 $68 $285 $445 225.042 5/8" (5 mm) Ea. $80 $207 $96 $02 $45 225.058 /4" (9 mm) Ea. $80 $207 $96 $02 $45 225.044 /8" (0 mm) Ea. $70 $97 $68 $285 $445 225.028 /2" (2 mm) Ea. $70 $97 $68 $285 $445 n/a n/a Bottom Rails w/ 227.002 Arm Type P & BP Square Tapered 5/8" (5 mm) /4" (9 mm) 7422 225.042 /8" (0 mm) Ea. $2 $240 $4 $29 $488 225.00 /2" (2 mm) Ea. $2 $240 $4 $29 $488 225.042 5/8" (5 mm) Ea. $22 $250 $49 $45 $495 225.060 /4" (9 mm) Ea. $22 $250 $49 $45 $495 225.044 /8" (0 mm) Ea. $2 $240 $4 $29 $488 225.00 /2" (2 mm) Ea. $2 $240 $4 $29 $488 n/a n/a 5/8" (5 mm) /4" (9 mm) Standard or Non-Standard Fabricated; lead time up to business days. Exit MANET Slidiing Handles and NOTES F.D.S. = Finished Door Size including endcaps. Specify glass thickness and hardware when ordering /8" (0 mm) and 5/8" (5 mm) rails. Must specify overall rail size and finish when ordering all rails. Prep/Install charge for other manufacturer s hardware is $0 net each, except for shear locks and magnetic locks, which are $80 net each. A-5

/ DriFit 4" DRS Top Door Rails for Doors Type P for 24" to 50" F.D.S. Model Top Rails with 928.006 Arm Square Item Number Description U/M Type P Top Rails with 904.60 Insert Type P Square Top Rails with 904.09 Insert Type P Square Clear 0 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze Pol. 60 Satin 600 886 225.442 /8" (0 mm) Ea. $207 $26 $405 $2 $469 225.40 /2" (2 mm) Ea. $207 $26 $405 $2 $469 n/a n/a 5/8" (5 mm) /4" (9 mm) 55.0 225.442 /8" (0 mm) Ea. $84 $2 $98 $6 $446 225.40 /2" (2 mm) Ea. $84 $2 $98 $6 $475 n/a n/a 5/8" (5 mm) /4" (9 mm) 5.9 225.442 /8" (0 mm) Ea. $220 $248 $82 $00 $459 225.404 /2" (2 mm) Ea. $220 $248 $82 $00 $459 n/a n/a 5/8" (5 mm) /4" (9 mm) Standard or Non-Standard Fabricated; lead time up to business days. NOTES F.D.S. = Finished Door Size including endcaps. Specify glass thickness and hardware when ordering /8" (0 mm) rails. Must specify overall rail size and finish when ordering all rails. Prep/Install Charge for EMSL 2765 Shear Lock Armature $60.00 net each. Prep/Install charge for other manufacturer s hardware is $0 net each, except for shear locks and magnetic locks, which are $80 net each. Exit MANET Slidiing Handles and A-6

/ DriFit 4" DRS Bottom Door Rails for Doors Type P and Type BP with and without Locks, for 24" to 50" F.D.S. Model Bottom Rails w/ 928.055 Pivot & Lock Square Item Number Description U/M Type P & BP Clear 0 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze Pol. 60 Satin 600 8852 225.442 /8" (0 mm) Ea. $27 $246 $45 $2 $479 225.405 /2" (2 mm) Ea. $27 $246 $45 $2 $479 n/a n/a Bottom Rails w/ 904.020 Insert & Lock Square Bottom Rails w/ 227.002 Arm & Lock Square 5/8" (5 mm) /4" (9 mm) Type P & BP 55.0 225.442 /8" (0 mm) Ea. $202 $2 $400 $8 $464 225.407 /2" (2 mm) Ea. $202 $2 $400 $8 $464 n/a n/a 5/8" (5 mm) /4" (9 mm) Type P & BP 7422 225.442 /8" (0 mm) Ea. $245 $274 $44 $6 $507 225.409 /2" (2 mm) Ea. $245 $274 $44 $6 $507 n/a n/a 5/8" (5 mm) /4" (9 mm) Bottom Rails w/ 928.055 Pivot Square Bottom Rails w/ 904.020 Insert Square Bottom Rails w/ 227.002 Arm Square Type P & BP 8852 225.442 /8" (0 mm) Ea. $84 $2 $82 $00 $446 225.406 /2" (2 mm) Ea. $84 $2 $82 $00 $446 n/a n/a 5/8" (5 mm) /4" (9 mm) Type P & BP 55.0 225.442 /8" (0 mm) Ea. $70 $99 $68 $285 $4 225.408 /2" (2 mm) Ea. $70 $99 $68 $285 $4 n/a n/a 5/8" (5 mm) /4" (9 mm) Type P & BP 7422 225.442 /8" (0 mm) Ea. $2 $242 $4 $28 $475 225.40 /2" (2 mm) Ea. $2 $242 $4 $28 $475 n/a n/a 5/8" (5 mm) /4" (9 mm) Standard or Non-Standard Fabricated; lead time up to business days. NOTES F.D.S. = Finished Door Size including endcaps. Specify glass thickness and hardware when ordering /8" (0 mm) rails. Must specify overall rail size and finish when ordering all rails. Prep/Install charge for other manufacturer s hardware is $0 net each, except for shear locks and magnetic locks, which are $80 net each. Exit MANET Slidiing Handles and A-7

/ DriFit 6" DRS Top Door Rails for Doors Type P for 24" to 50" F.D.S. Model Top Rails with 928.006 Arm Square Item Number Description U/M Type P Top Rails with 904.60 Insert Type P Square Top Rails with 904.09 Insert Type P Clear 0 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze Pol. 60 Satin 600 886 225.42 /8" (0 mm) Ea. $46 $96 $562 $468 $574 225. /2" (2 mm) Ea. $46 $96 $562 $468 $574 225.42 5/8" (5 mm) Ea. $4 $65 $587 $495 $602 225.6 /4" (9 mm) Ea. $4 $65 $587 $495 $602 55.0 225.42 /8" (0 mm) Ea. $22 $72 $59 $445 $55 225. /2" (2 mm) Ea. $22 $72 $59 $445 $55 225.42 5/8" (5 mm) Ea. $0 $42 $564 $47 $579 225.6 /4" (9 mm) Ea. $0 $42 $564 $47 $579 55.9 225.42 /8" (0 mm) Ea. $58 $408 $574 $480 $587 225.4 /2" (2 mm) Ea. $58 $408 $574 $480 $587 225.42 5/8" (5 mm) Ea. $46 $77 $599 $507 $64 Square 225.64 /4" (9 mm) Ea. $46 $77 $599 $507 $64 Standard or Non-Standard Fabricated; lead time up to business days. Exit MANET Slidiing Handles and NOTES F.D.S. = Finished Door Size including endcaps. Specify glass thickness and hardware when ordering /8" (0 mm) and 5/8" (5 mm) rails. Must specify overall rail size and finish when ordering all rails. Prep/Install Charge for EMSL 2765 Shear Lock Armature $60.00 net each. Prep/Install charge for other manufacturer s hardware is $0 net each, except for shear locks and magnetic locks, which are $80 net each. A-8

/ DriFit 6" DRS Bottom Door Rails for Doors Type P and Type BP with and without Locks, for 24" to 50" F.D.S. Model Item Number Description U/M Bottom Rails w/ 928.055 Pivot and Lock Type P & BP Square Clear 0 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze Pol. 60 Satin 600 8852 225.42 /8" (0 mm) Ea. $55 $405 $572 $478 $584 Bottom Rails w/ 904.020 Insert and Lock Type P & BP Square 225.05 /2" (2 mm) Ea. $55 $405 $572 $478 $584 225.42 5/8" (5 mm) Ea. $4 $75 $597 $504 $6 225.55 /4" (9 mm) Ea. $4 $75 $597 $504 $6 55.0 225.42 /8" (0 mm) Ea. $40 $9 $557 $46 $569 Bottom Rails w/ 227.002 Arm and Lock Type P & BP Square 225.07 /2" (2 mm) Ea. $40 $9 $557 $46 $569 225.42 5/8" (5 mm) Ea. $28 $60 $582 $489 $597 225.57 /4" (9 mm) Ea. $28 $60 $582 $489 $597 7422 225.42 /8" (0 mm) Ea. $84 $44 $600 $506 $62 225.09 /2" (2 mm) Ea. $84 $44 $600 $506 $62 225.42 5/8" (5 mm) Ea. $72 $40 $625 $5 $640 225.59 /4" (9 mm) Ea. $72 $40 $625 $5 $640 Bottom Rails w/ 928.055 Pivot Bottom Rails w/ 904.020 Insert Type P & BP 8852 225.42 /8" (0 mm) Ea. $2 $7 $59 $445 $55 225.06 /2" (2 mm) Ea. $2 $7 $59 $445 $55 225.42 5/8" (5 mm) Ea. $ $42 $564 $472 $579 225.56 /4" (9 mm) Ea. $ $42 $564 $472 $579 Type P & BP 55.0 225.42 /8" (0 mm) Ea. $08 $58 $525 $4 $57 225.08 /2" (2 mm) Ea. $08 $58 $525 $4 $57 225.42 5/8" (5 mm) Ea. $296 $28 $549 $457 $564 225.58 /4" (9 mm) Ea. $296 $28 $549 $457 $564 Bottom Rails w/ 227.002 Arm Type P & BP 7422 225.42 /8" (0 mm) Ea. $5 $40 $568 $474 $580 Square Square Square 225.0 /2" (2 mm) Ea. $5 $40 $568 $474 $580 225.42 5/8" (5 mm) Ea. $9 $7 $59 $500 $608 225.60 /4" (9 mm) Ea. $9 $7 $59 $500 $608 Standard or Non-Standard Fabricated; lead time up to business days. NOTES F.D.S. = Finished Door Size including endcaps. Specify glass thickness and hardware when ordering /8" (0 mm) and 5/8" (5 mm) rails. Must specify overall rail size and finish when ordering all rails. Prep/Install charge for other manufacturer s hardware is $0 net each, except for shear locks and magnetic locks, which are $80 net each. Exit MANET Slidiing Handles and A-9

/ DriFit 0" DRS Top Door Rails for Doors Type P for 24" to 50" F.D.S. Model Top Rails with 928.006 Arm Square Item Number Description U/M Type P Top Rails with 904.60 Insert Type P Square Top Rails with 904.09 Insert Type P Square Clear 0 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze Pol. 60 Satin 600 886 225.42 /8" (0 mm) Ea. $570 $58 $876 $742 $90 225. /2" (2 mm) Ea. $570 $58 $876 $742 $90 n/a n/a 5/8" (5 mm) /4" (9 mm) 55.0 225.42 /8" (0 mm) Ea. $547 $560 $85 $78 $878 225. /2" (2 mm) Ea. $547 $560 $85 $78 $878 n/a n/a 5/8" (5 mm) /4" (9 mm) 55.9 225.42 /8" (0 mm) Ea. $582 $595 $888 $754 $9 225.4 /2" (2 mm) Ea. $582 $595 $888 $754 $9 n/a n/a 5/8" (5 mm) /4" (9 mm) Standard or Non-Standard Fabricated; lead time up to business days. NOTES F.D.S. = Finished Door Size including endcaps. Specify glass thickness and hardware when ordering /8" (0 mm) rails. Must specify overall rail size and finish when ordering all rails. Prep/Install Charge for EMSL 2765 Shear Lock Armature $60.00 net each. Prep/Install charge for other manufacturer s hardware is $0 net each, except for shear locks and magnetic locks, which are $80 net each. Exit MANET Slidiing Handles and A-0

/ DriFit 0" DRS Bottom Door Rails for Doors Type P and Type BP with and without Locks, for 24" to 50" F.D.S. Model Item Number Description U/M Bottom Rails w/ 928.055 Pivot and Lock Type P & BP Square Clear 0 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze Pol. 60 Satin 600 8852 225.42 /8" (0 mm) Ea. $579 $592 $885 $75 $9 225.05 /2" (2 mm) Ea. $579 $592 $885 $75 $9 n/a n/a 5/8" (5 mm) /4" (9 mm) Bottom Rails w/ 904.020 Insert and Lock Type P & BP Square 55.0 225.42 /8" (0 mm) Ea. $565 $578 $87 $76 $896 225.07 /2" (2 mm) Ea. $565 $578 $87 $76 $896 n/a n/a 5/8" (5 mm) /4" (9 mm) Bottom Rails w/ 227.002 Arm and Lock Type P & BP 7422 225.42 /8" (0 mm) Ea. $608 $62 $94 $780 $99 225.09 /2" (2 mm) Ea. $608 $62 $94 $780 $99 n/a 5/8" (5 mm) Square n/a /4" (9 mm) Bottom Rails w/ 928.055 Pivot Square Bottom Rails w/ 904.020 Insert Square Bottom Rails w/ 227.002 Arm Square Type P & BP 8852 225.42 /8" (0 mm) Ea. $547 $560 $85 $79 $878 225.06 /2" (2 mm) Ea. $547 $560 $85 $79 $878 n/a n/a 5/8" (5 mm) /4" (9 mm) Type P & BP 55.0 225.42 /8" (0 mm) Ea. $52 $545 $88 $704 $86 225.08 /2" (2 mm) Ea. $52 $545 $88 $704 $86 n/a n/a 5/8" (5 mm) /4" (9 mm) Type P & BP 7422 225.42 /8" (0 mm) Ea. $576 $589 $882 $747 $907 225.0 /2" (2 mm) Ea. $576 $589 $882 $747 $907 n/a n/a 5/8" (5 mm) /4" (9 mm) Standard or Non-Standard Fabricated; lead time up to business days. NOTES F.D.S. = Finished Door Size including endcaps. Specify glass thickness and hardware when ordering /8" (0 mm) rails. Must specify overall rail size and finish when ordering all rails. Prep/Install charge for other manufacturer s hardware is $0 net each, except for shear locks and magnetic locks, which are $80 net each. Exit MANET Slidiing Handles and A-

/ DriFit Dri-Fit TM Sidelite Rails Includes extrusion, gasket, saddle and setting blocks Dri-Fit TM -5/8" Square Dri-Fit TM -5/8" Tapered Item Number Description U/M Clear 0 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze Pol. 60 Satin 600 Per Ft. (2") 225.200 /8" (0 mm) Ft. $29 $7 $80 $56 $96 225.20 /2" (2 mm) Ft. $0 $7 $80 $56 $96 225.00 5/8" (5 mm) Ft. $29 $8 $89 $62 $0 225.099 /4" (9 mm) Ft. $0 $7 $89 $6 $0 End Cap 925.0 /8" (0 mm) Ea. $ $ $28 $28 $ 925.0 /2" (2 mm) Ea. $ $ $28 $28 $ 925.5 5/8" (5 mm) Ea. $ $ $28 $28 $ 925.5 /4" (9 mm) Ea. $ $ $28 $28 $ Per Ft. (2") 225.20 /8" (0 mm) Ft. $29 $7 $8 $59 $99 225.202 /2" (2 mm) Ft. $0 $7 $8 $59 $99 Dri-Fit TM 4" Square End Cap 925.04 /8" (0 mm) Ea. $ $ $28 $28 $ 925.04 /2" (2 mm) Ea. $ $ $28 $28 $ Per Ft. (2") 225.050 /8" (0 mm) Ft. $29 $7 $8 $59 $99 225.049 /2" (2 mm) Ft. $0 $7 $8 $59 $99 n/a n/a 5/8" (5 mm) /4" (9 mm) End Cap 925.7 /8" (0 mm) Ea. $ $ $28 $28 $ 925.7 /2" (2 mm) Ea. $ $ $28 $28 $ Standard or Non-Standard Fabricated; lead time up to business days. Exit MANET Slidiing Handles and NOTES Mitre cut charge of $40 per joint. Must specify sidelite cut length and saddle height when ordering. (Endcaps measure /6" in thickness each.) Endcaps NOT included, please specify quantity required per rail. Saddle and gasket included in sidelite Per Foot pricing above. Maximum length for sidelite is 44" (.66 m) before requiring a splice joint; 20" ( m) for Brass and Bronze finishes. A-2

/ DriFit Dri-Fit TM Sidelite Rails Includes extrusion, gasket, saddle and setting blocks Dri-Fit M 6" Square Dri-Fit TM 0" Square Item Number Description U/M Clear 0 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze Pol. 60 Satin 600 Per Ft. (2") 225.224 /8" (0 mm) Ft. $5 $46 $02 $75 $05 225.225 /2" (2 mm) Ft. $5 $47 $0 $74 $05 225.094 5/8" (5 mm) Ft. $5 $46 $0 $78 $07 225.095 /4" (9 mm) Ft. $5 $47 $0 $78 $07 End Cap 925.028 /8" (0 mm) Ea. $55 $55 $62 $60 $62 925.028 /2" (2 mm) Ea. $55 $55 $62 $60 $62 925.528 5/8" (5 mm) Ea. $55 $55 $62 $60 $62 925.528 /4" (9 mm) Ea. $55 $55 $62 $60 $62 Per Ft. (2") 225.044 /8" (0 mm) Ft. $49 $59 $60 $2 $67 225.047 /2" (2 mm) Ft. $50 $58 $60 $2 $67 End Cap 925.94 /8" (0 mm) Ea. $68 $68 $85 $82 $85 925.94 /2" (2 mm) Ea. $68 $68 $85 $82 $85 Standard or Non-Standard Fabricated; lead time up to business days. Exit MANET Slidiing Handles and NOTES Must specify sidelite cut length and saddle height when ordering. (Endcaps measure /6" (5 mm) in thickness each.) Endcaps NOT included, please specify quantity required per rail. Saddle and gasket included in sidelite Per Foot pricing above. Maximum length for sidelite is 44" (.66 m) before requiring a splice joint; 20" ( m) for Brass and Bronze finishes. A-

/ DriFit Glazing and Dri-Fit TM U-Channels Item Number Description U/M Mill 00 Clear 0 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze Pol. 60 Satin 600 Glazing U-Channels 925.059 " x " U-Channel bright silver anodized Ft. $5 (0 only) 925.060 " x 2" U-Channel bright silver anodized Ft. $9 (0 only) Dri-Fit TM Channel for /8" and /2" Glass " " Dri-Fit 925.07 Anodized Ft. $4 $5 925.07 Cladded (Gasket Required) Ft. (0 only) $24 $6 $0 " -/4" Dri-Fit 925.072 Anodized Ft. $6 $7 925.072 Cladded (0 only) (Gasket Required) Ft. $29 $22 $8 Dri-Fit TM Channel for 5/8" and /4" Glass -/4" " Dri-Fit 925.7 Anodized Ft. $6 $6 925.7 Cladded (Gasket Required) Ft. (0 only) -/4" -/4" Dri-Fit 925.72 Anodized Ft. $5 $6 925.72 Cladded (Gasket Required) Ft. (0 only) Dri-Fit TM Channel Gasket 925.075 925.076 Gasket /Covers and Dri-Fit for /8" & 5/8" Glass Ft. $ Gasket /Covers and Dri-Fit for /2" & /4" Glass Ft. $ Dri-Fit TM Channel Endcap (Snap Fit) Endcap, for both " " and $4 925.078 " -/4" Ea. (09 only) Endcap, for both -/4" " and $5 925.78 -/4" -/4" Ea. (09 only) $25 $8 $ $28 $2 $7 Exit MANET Slidiing Handles and Non-Fabricated item, ships in business day. Standard or Non-Standard Fabricated; lead time up to business days. NOTES Must specify length when ordering. DORMA will cut to specified size, priced per foot only. Miter cut prep charge of $20.00 net per cut will be added to the invoice. Maximum length for extrusions is 44" (.66 m) before requiring a splice joint; 20" ( m) for Brass and Bronze finishes. A-4

/ DriFit DRS Base Rail Covers DRS Extrusions Item Number Description U/M -5/8" Square Rail Cover Clear 0 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze Pol. 60 Satin 600 925.05 Anodized Ft. $6 $0 225.502 Cladded Ft. $0 $8 $8-5/8" Tapered Rail Cover 925.06 Anodized Ft. $6 $0 225.50 Cladded Ft. $0 $8 $8 4" Square Rail Cover Gaskets/Covers 925.75 Anodized Ft. $6 $0 925.75 Cladded Ft. $0 $8 $8 6" Square Rail Cover 925.042 Anodized Ft. $ $8 225.506 Cladded Ft. $40 $27 $4 0" Square Rail Cover 925.205 Anodized Ft. $6 $8 225.525 Cladded (Gasket Required) Ft. $75 $57 $79 925.075 925.076 Gasket /Covers and Dri-Fit for /8" & 5/8" Glass Gasket /Covers and Dri-Fit for /2" & /4" Glass Ft. $ Ft. $ Covers for 5/8" & /4" Glass 5 5 925.55 925.542 925.55-5/8" Square Cover Ft. $6 $0 $8 925.542 6" Square Cover Ft. $6 $0 $8 Exit MANET Slidiing Handles and Standard or Non-Standard Fabricated; lead time up to business days. 5 Custom Fabricated; lead time up to 5 business days. NOTES Must specify cut length when ordering. DORMA will cut to specified size, priced per foot only. Maximum overall length 44" (.66 m) before requiring a splice joint; 20" ( m) for Brass and Bronze finishes. A-5

/ DriFit DRS Endcaps Item Number Description U/M Clear 0 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze Pol. 60 Satin 600 925.0-5/8" Square End Cap /8" & /2" Glass Ea. $ $ $28 $28 $ 925.5-5/8" Square End Cap 5/8" & /4" Glass Ea. $ $ $28 $28 $ 925.04 925.7-5/8" Tapered End Cap /8" & /2" Glass 4" Square End Cap /8" & /2" Glass Ea. $ $ $28 $28 $ Ea. $ $ $28 $28 $ 925.028 6" Square End Cap /8" & /2" Glass Ea. $55 $55 $62 $60 $62 925.528 925.240 925.94 6" Square End Cap 5/8" & /4" Glass 0" Square End Cap (Rails) /8" & /2" Glass 0" Square End Cap (Sidelites) /8" & /2" Glass Non-Fabricated item, ships in business day. Ea. $55 $55 $62 $60 $62 Ea. $68 $68 $85 $82 $85 Ea. $68 $68 $85 $82 $85 Exit MANET Slidiing Handles and A-6

/ DriFit Dri-Fit TM DRS Vertical Stile Item Number Description U/M Clear 0 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze Pol. 60 Satin 600 Dri-Fit TM DRS Vertical Stile -/8 x -7/8 Wide 225.280 /8" (0 mm) Ea. $60 $204 $46 $68 $646 225.28 /2" (2 mm) Ea. $60 $204 $46 $68 $646 includes endload cap and Dri-Fit gasket* (requires weather below) Weather Brush & Seal 925.289 925.288 Weather Brush (Pile) (not shown) Weather Seal (Vinyl) (not shown) Ft. $2 Ft. $2 Dri-Fit Stacking Glass Shim 925.4 Stacking Glass Shim No finish required Ea. $ * Uses Dri-Fit TM gasket 925.075 or 925.076, depending on glass thickness (included above). Non-Fabricated item, ships in business day. NOTES For Dri-Fit U-Channels, please refer to page E-5. Must specify vertical stile FINISHED HEIGHT when ordering (typically equal to finished door height). Maximum overall length 44" (.66 m); 20" ( m) for Brass and Bronze finishes. Vertical stiles are endload compatible with DORMA Easi-Align Shims and. (Stile caps included at top and bottom of vertical stile for endload use.) Must specify weather stripping requirement as separate line item REQUIRED for every stile ordered. Exit MANET Slidiing Handles and A-7

/ DriFit Exit MANET Slidiing Handles and A-8

Section B Product Description Page Universal Door B-2 Universal Transom B- Universal Transom/Sidelite B-4 Universal Transom/Sidelite/Fin B-5 Universal Fittings Transom 90 and 5 Sidelite Transom Double/Fin Patch Fitting B-6 Connectors Edge/Corner Fittings B-7 to B-0 Fittings Top Patch Fitting Wall Mount Side Connector Wall Mount B- Fittings Patch and Slide-on Locks B-2 TENR Door Hinges Wall and Glass Mount B- ARCOS ARCOS Door Patch FIttings Transom and Accessories B-4 Transom/Sidelite Transom/Sidelite/Fin B-5 Mechanical Channel Standard B-6 VISUR Double Acting B-7 BEYOND Pivoting B-8 NOTE: Refer to Section E for. Exit MANET Slidiing Handles and inside left outside right NOTE: Handing for angle or fin fittings viewed from outside and above as shown in diagram. B-

Universal for Doors 2-/4" (70 mm) pivot location unless noted Item Number Description U/M Clear 0 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze* Pol. 60 Satin 600 Top Door Patch Fitting (Round Spindle) (COMPLETE) Type BP, A & F PT20 8.0 /8" (0 mm) Ea. $6 $74 $05 $8 $40 8.0 /2" (2 mm) Ea. $6 $74 $05 $8 $40 8. 5/8" (5 mm) Ea. $0 $2 $45 $27 $99 Top Door Patch Fitting (RTS) (COMPLETE) 8. /4" (9 mm) Ea. $0 $2 $45 $27 $99 Type BP, A & F PT22 8.2 /8" (0 mm) Ea. $69 $8 $2 $90 $48 8.2 /2" (2 mm) Ea. $69 $8 $2 $90 $48 8. 5/8" (5 mm) Ea. $0 $2 $52 $4 $206 8. /4" (9 mm) Ea. $0 $2 $52 $4 $206 Bottom Door Patch Fitting (COMPLETE) Type BP, A & F PT0 8.00 /8" (0 mm) Ea. $65 $78 $08 $87 $4 8.00 /2" (2 mm) Ea. $65 $78 $08 $87 $4 8.0 5/8" (5 mm) Ea. $06 $27 $48 $0 $202 8.0 /4" (9 mm) Ea. $06 $27 $48 $0 $202 * Bronze finish in the Universal product line is Electro-plated using Brass base metal. Non-Fabricated item, ships in business day. Exit MANET Slidiing Handles and B-2 NOTES Must specify finish when ordering complete patch fitting assemblies. Covers are not available in Mill Finish.

Universal for Doors 2-/4" (70 mm) pivot location unless noted Item Number Description U/M Clear 0 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze* Pol. 60 Satin 600 Transom Patch Fitting w/ Pivot (COMPLETE) Type BP, A & F PT0 w/pivot 8.0 /8" (0 mm) Ea. $75 $90 $20 $96 $55 8. /2" (2 mm) Ea. $75 $90 $20 $96 $55 8.2 5/8" (5 mm) Ea. $6 $9 $60 $52 $24 Transom Patch Fitting w/ Stop (COMPLETE) 8.2 /4" (9 mm) Ea. $6 $9 $60 $52 $24 Type BP, A & F PT0 w/stop 8.2 /8" (0 mm) Ea. $75 $90 $20 $96 $55 8.2 /2" (2 mm) Ea. $75 $90 $20 $96 $55 8. 5/8" (5 mm) Ea. $6 $40 $60 $52 $24 8. /4" (9 mm) Ea. $6 $40 $60 $52 $24 Transom Patch Fitting w/ Blank (COMPLETE) Type BP, A & F PT0 w/blank 8.4 /8" (0 mm) Ea. $72 $87 $7 $9 $50 8.4 /2" (2 mm) Ea. $72 $86 $7 $9 $50 8.5 5/8" (5 mm) Ea. $2 $4 $57 $47 $204 8.5 /4" (9 mm) Ea. $2 $4 $57 $47 $204 90.28 Wall Plate Ea. $5 $2 $60 $5 $82 80.4 Threaded Rod Anchor Ea. $4 Exit MANET Slidiing Handles and * Bronze finish in the Universal product line is Electro-plated using Brass base metal. Non-Fabricated item, ships in business day. NOTES Must specify finish when ordering complete patch fitting assemblies. Covers are not available in Mill Finish. B-

Universal for Doors 2-/4" (70 mm) pivot location unless noted D/B 08 Brass Pol. 50 Pol. 70 Bronze* Pol. 60 Item Number Description U/M Clear 0 BK 09 Satin 599 Satin 700 Satin 600 Transom / Sidelite Patch Fitting w/ Pivot (COMPLETE) Type BP, A & F PT40 w/pivot 8.4 /8" (0 mm) Ea. $2 $5 $77 $59 $84 8.4 /2" (2 mm) Ea. $2 $5 $77 $59 $84 8.44 5/8" (5 mm) Ea. $28 $54 $208 $90 $22 8.44 /4" (9 mm) Ea. $28 $54 $208 $90 $22 Transom / Sidelite Patch Fitting w/ Stop (COMPLETE) Type BP, A & F PT40 w/stop 8.6 /8" (0 mm) Ea. $2 $5 $77 $59 $84 8.6 /2" (2 mm) Ea. $2 $5 $77 $59 $84 8.7 5/8" (5 mm) Ea. $28 $54 $208 $90 $22 8.7 /4" (9 mm) Ea. $28 $54 $208 $90 $22 Transom / Sidelite Patch Fitting w/ Blank (COMPLETE) Type BP, A & F PT40 w/blank 8.8 /8" (0 mm) Ea. $08 $0 $7 $55 $80 8.8 /2" (2 mm) Ea. $08 $0 $7 $55 $80 8.9 5/8" (5 mm) Ea. $2 $48 $204 $86 $29 8.9 /4" (9 mm) Ea. $2 $48 $204 $86 $29 Exit MANET Slidiing Handles and * Bronze finish in the Universal product line is Electro-plated using Brass base metal. Non-Fabricated item, ships in business day. NOTES Must specify finish when ordering complete patch fitting assemblies. Covers are not available in Mill Finish. B-4

Universal for Doors 2-/4" (70 mm) pivot location unless noted Item Number Description U/M Clear 0 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze* Pol. 60 Satin 600 Transom / Sidelite / Fin (Left Hand shown) Patch Fitting w/ Pivot (COMPLETE) Type BP, A & F PT4 w/pivot 8.55 /8" (0 mm) LH Ea. $277 $ $65 $44 $65 8.54 /8" (0 mm) RH Ea. $277 $ $65 $44 $65 8.55 /2" (2 mm) LH Ea. $277 $ $65 $44 $65 8.54 /2" (2 mm) RH Ea. $277 $ $65 $44 $65 8.56 5/8" (5 mm) LH Ea. $46 $45 $449 $428 $457 8.57 5/8" (5 mm) RH Ea. $46 $45 $449 $428 $457 8.56 /4" (9 mm) LH Ea. $46 $45 $449 $428 $457 8.57 /4" (9 mm) RH Ea. $46 $45 $449 $428 $457 Transom / Sidelite / Fin (Left Hand Shown) Patch Fitting w/ Stop (COMPLETE) Type BP, A & F PT4 w/stop 8.9 /8" (0 mm) LH Ea. $277 $2 $65 $44 $65 8.9 /8" (0 mm) RH Ea. $277 $2 $65 $44 $65 8.9 /2" (2 mm) LH Ea. $277 $2 $65 $44 $65 8.9 /2" (2 mm) RH Ea. $277 $2 $65 $44 $65 8.92 5/8" (5 mm) LH Ea. $46 $45 $449 $428 $457 8.94 5/8" (5 mm) RH Ea. $46 $45 $449 $428 $457 8.92 /4" (9 mm) LH Ea. $46 $45 $449 $428 $457 8.94 /4" (9 mm) RH Ea. $46 $45 $449 $428 $457 Transom / Sidelite / Fin (Left Hand Shown) Patch Fitting w/ Blank (COMPLETE) Type BP, A & F PT4 w/blank 8.95 /8" (0 mm) LH Ea. $27 $28 $6 $40 $6 8.97 /8" (0 mm) RH Ea. $27 $28 $6 $40 $6 8.95 /2" (2 mm) LH Ea. $27 $28 $6 $40 $6 8.97 /2" (2 mm) RH Ea. $27 $28 $6 $40 $6 8.96 5/8" (5 mm) LH Ea. $4 $40 $445 $424 $45 8.98 5/8" (5 mm) RH Ea. $4 $40 $445 $424 $45 8.96 /4" (9 mm) LH Ea. $4 $40 $445 $424 $45 8.98 /4" (9 mm) RH Ea. $4 $40 $445 $424 $45 Exit MANET Slidiing Handles and * Bronze finish in the Universal product line is Electro-plated using Brass base metal. Non-Fabricated item, ships in business day. NOTES Must specify finish when ordering complete patch fitting assemblies. Covers are not available in Mill Finish. B-5

Universal for Doors 2-/4" (70 mm) pivot location unless noted Item Number Description U/M Clear 0 Transom / 90 Sidelite (Left Hand Shown) Patch Fitting w/ Pivot (COMPLETE) D/B 08 BK 09 Brass Pol. 50 Satin 599 Type BP, A & F Pol. 70 Satin 700 Bronze* Pol. 60 Satin 600 PT42-90 8.64 /8" (0 mm) LH Ea. $780 $829 $96 $904 $96 8.65 /8" (0 mm) RH Ea. $780 $829 $96 $904 $96 8.64 /2" (2 mm) LH Ea. $780 $829 $96 $904 $96 8.65 /2" (2 mm) RH Ea. $780 $829 $96 $904 $96 8.84 5/8" (5 mm) LH Ea. $795 $86 $954 $95 $954 8.85 5/8" (5 mm) RH Ea. $795 $86 $954 $95 $954 8.84 /4" (9 mm) LH Ea. $795 $86 $954 $95 $954 8.85 /4" (9 mm) RH Ea. $795 $86 $954 $95 $954 Transom / 5 Sidelite (Left Hand Shown) Patch Fitting w/ Pivot COMPLETE) Type BP, A & F PT42-5 8.66 /8" (0 mm) LH Ea. $780 $829 $96 $904 $96 8.67 /8" (0 mm) RH Ea. $780 $829 $96 $904 $96 8.66 /2" (2 mm) LH Ea. $780 $829 $96 $904 $96 8.67 /2" (2 mm) RH Ea. $780 $829 $96 $904 $96 8.86 5/8" (5 mm) LH Ea. $795 $86 $954 $95 $954 8.87 5/8" (5 mm) RH Ea. $795 $86 $954 $95 $954 8.86 /4" (9 mm) LH Ea. $795 $86 $954 $95 $954 8.87 /4" (9 mm) RH Ea. $795 $86 $954 $95 $954 Transom Double / Fin Patch Fitting (COMPLETE) Type BP, A & F PT5 8.68 /8" (0 mm) Ea. $78 $78 $97 $78 $97 8.68 /2" (2 mm) Ea. $78 $78 $97 $78 $97 8.69 5/8" (5 mm) Ea. $80 $860 $995 $860 $995 8.69 /4" (9 mm) Ea. $80 $860 $995 $860 $995 (2 Inserts Required) Exit MANET Slidiing Handles and * Bronze finish in the Universal product line is Electro-plated using Brass base metal. NOTES Must specify finish when ordering complete patch fitting assemblies. Covers are not available in Mill Finish. B-6

Patch Fitting Connectors Item Number Description U/M Transom / Sidelite Connector (COMPLETE) Type BP, A & F Clear 0 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze* Pol. 60 Satin 600 PT60-6 80.50 /8" (0 mm) Ea. $55 $66 $ $9 $4 80.50 /2" (2 mm) Ea. $55 $66 $ $9 $4 80.452 Specify thickness 80.452 Specify thickness 5/8" (5 mm) Ea. $70 $84 $26 $08 $58 /4" (9 mm) Ea. $70 $84 $26 $08 $58 Transom/Sidelite/Fin Connector (COMPLETE) Type BP, A & F PT60-6 80.58 /8" (0 mm) LH Ea. $55 $66 $ $9 $4 80.57 /8" (0 mm) RH Ea. $55 $66 $ $9 $4 80.58 /2" (2 mm) LH Ea. $55 $66 $ $9 $4 80.57 /2" (2 mm) RH Ea. $55 $66 $ $9 $4 Transom/Sidelite/Stop Connector (COMPLETE) Type BP, A & F PT62 80.7 /8" (0 mm) Ea. $02 $2 $54 $68 $222 80.7 /2" (2 mm) Ea. $02 $2 $54 $68 $222 Exit MANET Slidiing Handles and * Bronze finish in the Universal product line is Electro-plated using Brass base metal. NOTES Must specify finish when ordering complete patch fitting assemblies. Covers are not available in Mill Finish. B-7

Patch Fitting Connectors Item Number Description U/M Clear 0 D/B 08 BK 09 Brass Pol. 50 Only Pol. 70 Satin 700 Bronze* Pol. 60 Satin 600 Transom Connector (COMPLETE) Type BP, A & F PT70 80.50 /8" (0 mm) Ea. $65 $78 $95 $87 $95 80.50 /2" (2 mm) Ea. $65 $78 $95 $87 $95 (2 Blanks/2 Stops Required) 80.58 Specify thickness 80.58 Specify thickness 5/8" (5 mm) Ea. $90 $08 $20 $2 $20 /4" (9 mm) Ea. $90 $08 $20 $2 $20 Transom / Fin Connector (COMPLETE) Type BP, A & F PT7 80.6 /8" (0 mm) Ea. $42 $507 $59 $544 $854 Sidelite Patch Fitting (COMPLETE) 80.6 /2" (2 mm) Ea. $42 $507 $59 $544 $854 PT80 80.70 /8" (0 mm) Ea. $72 $86 $28 $07 $55 80.70 /2" (2 mm) Ea. $72 $86 $28 $07 $55 80.472 Specify thickness 80.472 Specify thickness 5/8" (5 mm) Ea. $97 $6 $5 $2 $80 /4" (9 mm) Ea. $97 $6 $5 $2 $80 Exit MANET Slidiing Handles and * Bronze finish in the Universal product line is Electro-plated using Brass base metal. Non-Fabricated item, ships in business day. NOTES Must specify finish when ordering complete patch fitting assemblies. Covers are not available in Mill Finish. B-8

Patch Fitting Connectors Item Number Description U/M Connector w/ Fin Fitting (COMPLETE) Clear 0 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze* Pol. 60 Satin 600 PT8 80.75 /8" (0 mm) Ea. $20 $47 $48 $66 $402 80.75 /2" (2 mm) Ea. $20 $47 $48 $66 $402 90 Angled Connector (COMPLETE) PT80-90 80.7 /8" (0 mm) Ea. $80 $426 $4 $4 $47 80.7 /2" (2 mm) Ea. $80 $426 $4 $4 $47 5 Angled Connector (COMPLETE) PT80-5 80.72 /8" (0 mm) Ea. $54 $404 $45 $405 $485 80.72 /2" (2 mm) Ea. $54 $404 $45 $405 $485 9 4 and 6 79 Connector (COMPLETE) must specify degree PT80-Varies 80.78 /8" (0 mm) Ea. $58 $59 $59 $662 $854 80.78 /2" (2 mm) Ea. $58 $59 $59 $662 $854 Exit MANET Slidiing Handles and * Bronze finish in the Universal product line is Electro-plated using Brass base metal. NOTES Must specify finish when ordering complete patch fitting assemblies. Covers are not available in Mill Finish. B-9

Patch Fitting Connectors Item Number Description U/M Clear 0 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze* Pol. 60 Satin 600 90 Angled Connector Shortened (COMPLETE) PT80 / shortened-90 80.470 /8" (0 mm) Ea. $2 $75 $45 $96 $572 80.470 /2" (2 mm) Ea. $2 $75 $45 $96 $572 9-4 /6-79 Connector Short. (COMPLETE) must specify degree PT80 / short varies 80.79 /8" (0 mm) Ea. $2 $75 $45 $96 $572 80.79 /2" (2 mm) Ea. $2 $75 $45 $96 $572 Edge Fitting (COMPLETE) PT90 Corner Fitting (COMPLETE) 807.02 /8" (0 mm) Ea. $27 $2 $68 $59 $68 807.02 /2" (2 mm) Ea. $27 $2 $68 $59 $68 807.20 Specify thickness 807.20 Specify thickness 5/8" (5 mm) Ea. $52 $62 $9 $84 $9 /4" (9 mm) Ea. $52 $62 $9 $84 $9 PT9 807.02 /8" (0 mm) Ea. $8 $45 $79 $70 $79 807.02 /2" (2 mm) Ea. $8 $45 $79 $70 $79 807.2 Specify thickness 807.2 Specify thickness 5/8" (5 mm) Ea. $6 $75 $04 $95 $04 /4" (9 mm) Ea. $6 $75 $04 $95 $04 * Bronze finish in the Universal product line is Electro-plated using Brass base metal. Exit MANET Slidiing Handles and NOTES Must specify finish when ordering complete patch fitting assemblies. Covers are not available in Mill Finish. B-0

for Doors Item Number Description U/M Top Patch Fitting w/ Wall Mount Pivot Fixing Plate (COMPLETE) Clear 0 Type BP, A & F D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 PT29 8.4 /8" (0 mm) Ea. $209 $250 $2 $29 2-/6" (55 mm) pivot location. Bottom fitting/rail must have the same pivot point. 8.09 /2" (2 mm) Ea. $209 $250 $2 $29 Side Connector w/ Wall Plate (COMPLETE) (50 only) 80.5 /8" (0 mm) Ea. $59 $90 $247 $29 80.5 /2" (2 mm) Ea. $59 $90 $247 $29 Exit MANET Slidiing Handles and NOTES Must specify finish when ordering complete patch fitting assemblies. Covers are not available in Mill Finish. B-

Patch Lock for Mortise Cylinders Item Number Description U/M Patch Lock Fitting (COMPLETE) AR20 Type F Clear 0 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze Pol. 60 Satin 600 80.24 /8" (0 mm) Ea. $97 $9 $77 $47 $77 80.22 /2" (2 mm) Ea. $97 $9 $77 $47 $77 5 5 5 80.26 5/8" (5 mm) Ea. $72 $94 $252 $222 $252 5 5 5 80.25 /4" (9 mm) Ea. $72 $94 $252 $222 $252 925.02 Extended Bolt 7/8" Throw Ea. $8 925.022 Square Bolt Ea. $5 82.02 Slide-on Lock Bolt /8" (0 mm) glass ONLY Ea. $7 When retracted, long throw extends beyond lock base by /4" (6.5 mm). Non-Fabricated item; ships in business day. 5 Custom Fabricated; lead time up to 5 business days. Exit MANET Slidiing Handles and NOTES Must specify finish when ordering complete patch fitting assemblies. Covers are not available in Mill Finish. Blank covers for the AR20 Patch Lock are not available. Uses dummy cylinder. B-2

TENR Item Number Item Number Description U/M EV- 4 SSB 05 ARC 22 SSS TENR Double-Acting Hinge Glass to Wall/Frame 82.520 /8" (0 mm) Pr. $,94 $,222 $,2 82.520 /2" (2 mm) Pr. $,94 $,222 $,2 Exit MANET Slidiing Handles and TENR Double-Acting Hinge Glass to Glas 82.52 /8" (0 mm) Pr. $,570 $,622 $,774 82.52 /2" (2 mm) Pr. $,570 $,622 $,774 Standard or Non-Standard Fabricated; lead time up to business days. NOTE: TENR hinges are all aluminum base materials. B-

ARCOS for Doors 2-/6" (55 mm) pivot location unless noted Item Number Description U/M ARCOS (COMPLETE) Type BP, A & F Clear 0 D/B 08 BK 09 Pol. 70 Satin 700 Top Door Patch Fitting (Round Spindle) 826.0 /8" (0 mm) Ea. $62 $227 $257 8.20 /2" (2 mm) Ea. $62 $227 $257 Top Door Patch Fitting (RTS) 826.2 /8" (0 mm) Ea. $254 $56 $6 8.208 /2" (2 mm) Ea. $254 $56 $6 Bottom Door Patch Fitting 826.00 /8" (0 mm) Ea. $65 $2 $260 8.200 /2" (2 mm) Ea. $65 $2 $260 Transom Patch Fitting w/ Pivot 826.20 /8" (0 mm) Ea. $69 $27 $26 8.220 /2" (2 mm) Ea. $69 $27 $26 Transom Patch Fitting w/ Stop 826.420 /8" (0 mm) Ea. $69 $27 $26 8.222 /2" (2 mm) Ea. $69 $27 $26 Transom Patch Fitting w/ Blank 826.42 /8" (0 mm) Ea. $65 $2 $260 8.22 /2" (2 mm) Ea. $65 $2 $260 90.28 Wall Plate Ea. $5 $2 $5 80. Wall Anchor Ea. $4 80.4 Threaded Rod Anchor Ea. $4 Non-Fabricated item, ships in business day. Exit MANET Slidiing Handles and B-4 NOTES Must specify finish when ordering complete patch fitting assemblies. Covers are not available in Mill Finish.

ARCOS for Doors 2-/6" (55 mm) pivot location unless noted Item Number Description U/M ARCOS (COMPLETE) Type BP, A & F Clear 0 D/B 08 BK 09 Pol. 70 Satin 700 Transom/Sidelite Fitting w/ Pivot 826.40 /8" (0 mm) Ea. $222 $0 $6 8.240 /2" (2 mm) Ea. $222 $0 $6 Transom/Sidelite Fitting w/ Stop 826.440 /8" (0 mm) Ea. $222 $0 $6 8.24 /2" (2 mm) Ea. $222 $0 $6 Transom/Sidelite Fitting w/ Blank 826.44 /8" (0 mm) Ea. $29 $08 $59 8.242 /2" (2 mm) Ea. $29 $08 $59 Transom/Sidelite/Fin Fitting w/ Pivot 826.62 /8" (0 mm) LH Ea. $586 $820 $85 826.6 /8" (0 mm) RH Ea. $586 $820 $85 8.245 /2" (2 mm) LH Ea. $586 $820 $85 8.246 /2" (2 mm) RH Ea. $586 $820 $85 Transom/Sidelite/Fin Fitting w/ Stop 826.262 /8" (0 mm) LH Ea. $586 $820 $85 826.26 /8" (0 mm) RH Ea. $586 $820 $85 8.248 /2" (2 mm) LH Ea. $586 $820 $85 8.249 /2" (2 mm) RH Ea. $586 $820 $85 Transom/Sidelite/Fin Fitting w/blank 826.264 /8" (0 mm) LH Ea. $586 $820 $85 826.265 /8" (0 mm) RH Ea. $586 $820 $85 8.250 /2" (2 mm) LH Ea. $586 $820 $85 8.25 /2" (2 mm) RH Ea. $586 $820 $85 Exit MANET Slidiing Handles and NOTES Must specify finish when ordering complete patch fitting assemblies. Covers are not available in Mill Finish. B-5

Standard Mechanical Channel and Options Item Number Description U/M Standard Type Mechanical Channel (no glass fabrication needed) Clear 0 Standard Base Profile 807.00 /8" (0 mm) Ea. $4 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze* Pol. 60 Satin 600 807.045 /2" (2 mm) Ea. $4 Clip-on Cover Profile (all glass thicknesses) 807.047 5/8" (5 mm) Ea. $4 807.049 /4" (9 mm) Ea. $4 807.00 Ft. $6 $8 $4 $ $20 Standard Clamp 807.004 /8" (0 mm) Ea. $2 807.085 /2" (2 mm) Ea. $2 807.087 5/8" (5 mm) Ea. $2 807.089 /4" (9 mm) Ea. $2 Options Endcap 807.007 /8" (0 mm) Ea. $8 $2 $8 $4 $56 807.007 /2" (2 mm) Ea. $8 $2 $8 $4 $56 807.065 5/8" (5 mm) Ea. $8 $2 $8 $4 $56 807.065 /4" (9 mm) Ea. $8 $2 $8 $4 $56 Filler Block 807.006 /8" (0 mm) & Ea. $57 $68 $9 /2" (2 mm) ( only) * Bronze finish in the Universal product line is Electro-plated using Brass base metal. Standard or Non-Standard Fabricated; lead time up to business days. Exit MANET Slidiing Handles and NOTE: Maximum overall length 20" ( m). B-6

VISUR All-Glass Double-Acting Door Systems /8" and /2" (0 and 2 mm) Glass Item Number Description U/M EV 4 Pol. 70 Satin 700 VISUR Complete Sets 80.770 80.77 DORMA VISUR complete set for single door includes header tube, RTS 88, top and bottom pivot. Please indicate finished opening width. DORMA VISUR complete set for pair of doors includes header tube, RTS 88, top and bottom pivot. Please indicate finished opening width. Set $,82 $,82 Set $,642 $,642 VISUR Components 80.772 80.77 80.775 80.776 80.777 80.778 80.779 80.780 DORMA VISUR set composed of RTS 88, top and bottom pivot. DORMA VISUR set composed of top and bottom pivot (without RTS 88). DORMA VISUR header tube profile for single door. Max. 4-5/6" ( mm) door panel width. Please indicate finished opening width. DORMA VISUR header tube profile for pair of doors. Max. 2 x 4-5/6" ( mm) door panel width. Please indicate finished opening width. DORMA VISUR header tube profile for pair of doors. Max. 2 x 4-5/6" ( mm) door panel width. Please indicate finished opening width. DORMA VISUR header tube cover profile for single door. Max. 4-5/6" ( mm) door panel width. Please indicate finished opening width. DORMA VISUR header tube profile in stock length 25-5/6" (200 mm). DORMA VISUR header tube profile in stock length 57" (4000 mm). Ea. $,544 $,544 Ea. $929 $929 Ea. $259 $259 Ea. $47 $47 Ea. $77 $77 Ea. $24 $24 Ea. $6 $6 Ea. $22 $22 Door Stops 829.950 Floor door stop Ea. $76 $76 829.95 Wall door stop, short Ea. $72 $72 Exit MANET Slidiing Handles and 829.952 Wall door stop, long Ea. $8 $8 NOTE: Specify glass thickness: /8" (0 mm) or /2" (2 mm). B-7

BEYOND Pivoting /8" and /2" (0 and 2 mm) Glass Item Number Description U/M BEYOND Pivoting Basic Set - Short Type Pivoting fitting set, short type, consists of: top pivot fitting with pivot 5 mm dia. bottom pivot fitting with insert for DORMA floor spring spindle or round pivot (ordered separately) EV 4 D/B 08 BK 09 Similar to S.S.S. 07 80.00 /8" (0 mm) Set $582 $70 80.0 /2" (2 mm) Set $582 $70 Pivoting Basic Fitting - Long Type Pivoting fitting, long type, with pivot dia. 5 mm at top and insert for DORMA floor spring spindle or round pivot at bottom (ordered separately). Please indicate "exact door height = glass measurement" with order. 80.0 /8" (0 mm) Ea. $657 $80 80. /2" (2 mm) Ea. $657 $80 BEYOND Components BEYOND overpanel fitting, wall connector with plastic socket for top pivot. 80.20 /8" (0 mm) Ea. $276 $7 80.2 /2" (2 mm) Ea. $276 $7 BEYOND overpanel fitting, glass connector with plastic socket for top pivot 80.0 /8" (0 mm) Ea. $282 $44 80. /2" (2 mm) Ea. $282 $44 BEYOND glass connector for connection of sidelite at closing side 80.20 /8" (0 mm) and /2" (2 mm) Ea. $ Exit MANET Slidiing Handles and NOTE: Ceiling and Floor Pivots sold separately. B-8

& Accessories Section C and Accessories Product Description Page Packages Single and Paired with Installed C-2 Header Accessories RTS88 Covers C- Header Accessories 4-/8" Wide Header Extrusions C-4 Header Accessories 4-/2" Wide Header Extrusions C-5 Floating NOTE: Refer to Section E for. Exit MANET Slidiing Handles and Floating for All-Glass Entrances with Transoms C-6 C-

& Accessories Single Range 24" 50" Paired Range 48" 00" Model Item Number Description U/M Single Header with One RTS88 Closer Installed Range 24" 50" Header Width Clear 0 D/B 08 BK 09 Type P, BP, A & F Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze Pol. 60 Satin 600 2.08 4-/8" Ea. $28 $7 $55 $42 $644 2.040 4-/2" Ea. $6 $49 $54 $445 $668 Paired Header with Two RTS88 Closers Installed Type P, BP, A & F Range 48" 00" Header Width 2.020 4-/8" Ea. $655 $675 $,00 $865 $,288 2.042 4-/2" Ea. $672 $698 $,069 $890 $,6 Single Header with 927.064 Pivot Installed Type P, BP, A & F Range 24" 50" Header Width 8062 2.06 4-/8" Ea. $47 $56 $06 $28 $8 2.044 4-/2" Ea. $55 $68 $25 $249 $407 Paired Header with Two 927.064 Pivots Installed Type P, BP, A & F Range 48" 00" Header Width 8062 2.08 4-/8" Ea. $294 $ $6 $476 $766 2.046 4-/2" Ea. $0 $5 $650 $497 $8 Single Header with RTS88 Closer and Shear Lock Installed Type P Range 24" 50" Header Width 5 5 5 2.025 4-/8" Ea. $,444 $,56 $,555 $,576 $,7 2.02 4-/2" Ea. $,457 $,50 $,56 $,626 $,79 Paired Header with Two RTS88 Shear Locks Installed Type P Range 48" 00" Header Width 5 5 5 2.027 4-/8" Ea. $2,889 $,0 $, $,52 $,422 2.04 4-/2" Ea. $2,94 $,060 $,25 $,252 $,48 Exit MANET Slidiing Handles and Standard or Non-Standard Fabricated; lead time up to business days. NOTES 5 Custom Fabricated; lead time up to 5 business days. Must specify RTS88 closer type, finish code, and finished size and submit sketch of layout. Above headers anodized 4 sides and clad sides. For face clad only, see Header Extrusions on pages C-4 and C-5. When ordering, please indicate header length and spindle location. C-2

& Accessories RTS88 Closers Installed Item Number Description U/M RTS88 Closers Barrier Free Exterior (BFE) Mill 00 928.6 05 HO Ea. $20 928.7 05 HO (5 mm ext.) Ea. $20 928.8 05 NHO Ea. $20 928.9 05 NHO (5 mm ext.) Ea. $20 RTS88 Closers Barrier Free Interior (BFI) 928.20 05 HO Ea. $20 928.2 05 HO (5 mm ext.) Ea. $20 928.22 05 NHO Ea. $20 928.2 05 NHO (5 mm ext.) Ea. $20 RTS88 Closers Hold Open 928.25 05 Size Ea. $20 928.26 05 Size 4 Ea. $20 928.27 90 Size Ea. $20 928.28 90 Size 4 Ea. $20 928.29 90 (5 mm ext.) Size Ea. $20 928.0 05 (5 mm ext.) Size Ea. $20 RTS88 Closers No Hold Open 928.2 05 Size Ea. $20 928. 05 Size 4 Ea. $20 928.4 90 Size 2 Ea. $20 928.5 90 Size Ea. $20 928.6 90 Size 4 Ea. $20 928.7 05 (5 mm ext.) Size Ea. $20 928.8 90 (5 mm ext.) Size Ea. $20 Standard or Non-Standard Fabricated; lead time up to business days. Exit MANET Slidiing Handles and NOTES $0 installation fee per RTS88 installed. DORMA Glas requires the use of 5 mm extended spindles with ALL Herculite glass door applications when an OHCC is specified. This allows for optimum spindle bite. Inadequate bite can cause premature wear on the closers and hardware, potentially voiding warranty. Spring sizes other than those listed above are available please consult factory. C-

& Accessories 4-/8" Wide -/4" Header Extrusions Item Number Description U/M Clear 0 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze Pol. 60 Satin 600 4-/8" Extrusions 9.02 Header Tube Anodized Ft. $9 $ 2.999 Cladded (Sides Only) Ft. $ $22 $42 9.00 Header Flat Cover Anodized Ft. $4 $4 2.998 Cladded (Face Only) Ft. $25 $6 $ 9.0 2.997 9. 9.029 2.996 925.075 Header Glazing Cover Anodized Ft. $7 $0 Cladded (Face Only) (Gasket Required) Ft. $28 $7 $5 Glazing Pocket Anodized & Cladded Ea. $2 $2 5/8" glass Header Cover Cap Anodized Ea. $5 $5 Cladded (Face Only) (Length -5/6") Ea. $4 $ $54 Gasket/Covers & Dri-Fit /8" (0) & 5/8" (5) Glass Ft. $ 925.076 /2" (2) & /4" (9) Glas Ft. $ 9.025 9.02 2.99 EMSL 2765 Shear Lock not installed Ea. $975 EMSL 2765 Shear Lock Header Cap 5 5 Ea. $8 $9 Anodized Cladded (Face Only) 5 (Length 2-/8") Ea. $6 $49 $67 Non-Fabricated item, ships in business day. Standard or Non-Standard Fabricated; lead time up to business days. 5 Custom Fabricated; lead time up to 5 business days. Additional Charges Jam preparation charge includes blocking support when required, $20.00 net each; additional lead time up to 5 business days. Preparation charge per miter cut, (regardless of finish) is $20.00 net each; additional lead time of up to 5 business days. Additional Charges for DORMA Preparation DORMA Closer, walking beam pivot, or electric strike preparation and/or installation, $0.00 net each; additional lead time up to business days. DORMA shear lock, magnetic lock, or /4" offset pivot preparation and/or installation, $60.00 net each; additional lead time up to 5 business days. Additional Charges for Other Manufacturer's Products Refer to facing page C-5. Exit MANET Slidiing Handles and NOTES Must specify length when ordering. DORMA will cut to specified size, priced per foot only. Maximum overall length 44" (.66 m) before requiring a splice joint; 20" ( m) for Brass and Bronze finishes. C-4

& Accessories 4-/2" Wide -/4" Header Extrusions Item Number Description U/M Clear 0 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze Pol. 60 Satin 600 4-/2" Extrusions 9.0 Header Tube Anodized Ft. $ $2 2.995 Cladded (Sides Only) Ft. $5 $24 $44 Header Flat Cover 9.04 Anodized Ft. $4 $6 2.994 Cladded (Face Only) Ft. $29 $8 $6 9.05 2.99 9.5 9.06 2.992 925.075 Header Glazing Cover Anodized Ft. $9 $2 Cladded (Face Only) (Gasket Required) Ft. $2 $2 $40 Glazing Pocket Anodized & Cladded Ea. $2 $2 5/8" glass Header Cover Cap Anodized Ea. $5 $5 Cladded (Face Only) (Length -5/6") Ea. $4 $ $54 Gasket/Covers & Dri-Fit /8" (0) & 5/8" (5) Glass Ft. $ 925.076 /2" (2) & /4" (9) Glas Ft. $ 9.025 9.07 2.990 EMSL 2765 Shear Lock not installed Ea. $975 EMSL 2765 Shear Lock 5 5 Header Cap Ea. $ $2 Anodized Cladded (Face Only) 5 (Length 2-/8") Ea. $67 $5 $7 Non-Fabricated item, ships in business day. Standard or Non-Standard Fabricated; lead time up to business days. Additional Charges / Additional Charges for DORMA Preparation Refer to facing page C-4 for additional charges related to preparing and installing hardware. Additional Charges for Other Manufacturer's Products Standard preparation and/or installation fee for other manufacturer s bolt lock, electric strike, or walking beam pivot is $50 net per unit. DORMA reserves the right to increase the fee depending on complexity of the product(s). Products not mentioned will be reviewed upon receipt of order. Standard preparation and/or installation fee for other manufacturer s OHC closer, magnetic lock, or shear lock is $80 net per unit. DORMA reserves the right to increase the fee depending on complexity of the product(s). Products not mentioned will be reviewed upon receipt of order. Separate fees may apply to rails and other prep/installation requirements; see appropriate price book section. Allow up to an additional 5 business days lead time for preparation once DORMA has reviewed and received all required information for fabrication. Allow up to an additional 5 business days lead time for preparation with installation, once DORMA has reviewed and received all required information for fabrication. Multiple product prep/install lead times will depend on complexity and availability of products, call customer service for lead time estimates. NOTES 5 Custom Fabricated; lead time up to 5 business days. Must specify length when ordering. DORMA will cut to specified size, priced per foot only. Maximum overall length 44" (.66 m) before requiring a splice joint; 20" ( m) for Brass and Bronze finishes. Exit MANET Slidiing Handles and C-5

& Accessories Floating Header for All-Glass Entrances with Transom 4-/8" (05 mm) and 4-/2" (4 mm) Depths Installed with RTS88 Closer or Pivot Item Number Description U/M Clear 0 Single Door Floating Header with () RTS88 installed (specify closer function) D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze Pol. 60 Satin 600 Range 24" 50" (60 mm to 270 mm) Header Depth 5 5 5 2.48 4-/8" (05 mm) Ea. $ 78 $ 75 $ 98 $ 868 $ 05 2.440 4-/2" (4 mm) Ea. $ 74 $ 757 $ 970 $ 890 $ 049 Pair of Doors Floating Header with (2) RTS88 installed (specify closer function) Range 48" 00" (29 mm to 2540 mm) Header Depth 5 5 5 2.420 4-/8" (05 mm) Ea. $,7 $,69 $,774 $,68 $,90 2.442 4-/2" (4 mm) Ea. $,68 $,42 $,84 $,680 $,998 Single Door Floating Header with () 927.064 Pivot installed Range 24" 50" (60 mm to 270 mm) Header Depth 5 5 5 2.46 4-/8" (05 mm) Ea. $ 77 $ 94 $ 599 $ 52 $ 644 2.444 4-/2" (4 mm) Ea. $ 9 $ 46 $ 60 $ 54 $ 678 Pair of Doors Floating Header with (2) 927.064 Pivots installed Range 48" 00" (29 mm to 2540 mm) Header Depth 5 5 5 2.48 4-/8" (05 mm) Ea. $ 652 $ 690 $,00 $ 946 $,88 2.446 4-/2" (4 mm) Ea. $ 685 $ 7 $,6 $ 98 $,256 5 Custom Fabricated; lead time up to 5 business days. Exit MANET Slidiing Handles and C-6 NOTE: Header is 2" (05 mm) longer than door opening.

Section D Product Description Page For single acting -/6" offset hung doors D-2 to D-4 For single acting 5/6", /8", and /2" offset hung doors D-5 Exit MANET Slidiing Handles and NOTE: Refer to Section E for. D-

Fittings for Single Acting -/6" Doors /8" and /2" (0 and 2 mm) Glass Model Top Door Offset Patch Fitting Item Number Description U/M Type A & F Clear 0 D/B 08 BK 09 Brass Pol. 50 only Chrome Pol. 50 Satin 500 Similar to S.S.S 07 2. 902.0 Left Hand (shown) Ea. $227 $24 $56 $567 $22 902. Right Hand Ea. $227 $24 $56 $567 $22 Bottom Door Offset Patch Fitting Type A & F. 902.00 Left Hand (shown) Ea. $24 $5 $552 $575 $ 902.0 Right Hand Ea. $24 $5 $552 $575 $ Transom Offset Pivot Fitting Transom / Sidelite Offset Pivot Fitting Type A & F 26. 902.20 Left Hand (shown) Ea. $252 $6 $527 $582 $59 902.2 Right Hand Ea. $252 $6 $527 $582 $59 Type A & F 27. 902.40 Left Hand (shown) Ea. $296 $427 $56 $69 $424 20.4 PT 20.5 PT5 902.4 Right Hand Ea. $296 $427 $56 $69 $424 90. Wall Anchor Ea. $4 90.4 Threaded Rod Anchor Ea. $4 Exit MANET Slidiing Handles and NOTES: Handing for angle or fin fittings viewed from outside and above as shown in diagram. Please specify glass thickness when ordering. left inside outside right D-2

Fittings for Single Acting -/6" Doors /8" and /2" (0 and 2 mm) Glass Frame Mount Offset Fitting Item Number Description U/M Type A & F Clear 0 D/B 08 BK 09 Brass Pol. 50 only Chrome Pol. 50 Satin 500 Similar to S.S.S 07 9. 902.50 Ea. $4 $95 $7 $49 $279 Frame Mount Offset Fitting Type A & F Frame Mount Offset Fitting 9.2 902.5 Ea. $4 $95 $7 $49 $279 Type A & F 9. 902.52 Left Hand Ea. $4 $95 $7 $49 $279 902.5 Right Hand Ea. $4 $95 $7 $49 $279 Glass to Glass Door Offset Patch Fitting Type A & F 2.4 902.200 Left Hand (shown) Ea. $497 $7 $876 $965 $707 902.20 Right Hand Ea. $497 $7 $876 $965 $707 Glass to Wall Door Offset Patch Fitting Type A & F 2.5 902.202 Left Hand (shown) Ea. `$497 $7 $876 $965 $707 902.20 Right Hand Ea. $497 $7 $876 $965 $707 Glass to Wall Door Offset Patch Fitting Type A & F 2.6 902.204 Left Hand (shown) Ea. $497 $7 $876 $965 $707 902.205 Right Hand Ea. $497 $7 $876 $965 $707 Exit MANET Slidiing Handles and NOTES: Handing for angle or fin fittings viewed from outside and above as shown in diagram. Please specify glass thickness when ordering. left inside outside right D-

Fittings for Single Acting -/6" Doors /8" and /2" (0 and 2 mm) Glass D/B 08 BK 09 Brass Pol. 50 only Item Number Model Item Number Description U/M Clear 0 Top Door Offset Patch Fitting Type A & F shortened 9/2" Side Only Chrome Pol. 50 Satin 500 Similar to S.S.S 07 2.2 902.2 /8" glass LH* Ea. $227 $24 $56 $567 $22 902. /8" glass RH Ea. $227 $24 $56 $567 $22 902.64 /2" glass LH Ea. $227 $24 $56 $567 $22 902.65 /2" glass RH Ea. $227 $24 $56 $567 $22 *shown Bottom Door Offset Patch Fitting Type A & F shortened 9/2" Side Only.2 902.02 /8" glass LH* Ea. $24 $5 $552 $575 $ 902.0 /8" glass RH Ea. $24 $5 $552 $575 $ 902.60 /2" glass LH Ea. $24 $5 $552 $575 $ 902.6 /2" glass RH Ea. $24 $5 $552 $575 $ *shown Glass to Wall Door Offset Patch Fitting Type A & F shortened 9/2" Side Only 2.7 902.206 /8" glass LH* Ea. $497 $7 $876 $965 $707 902.207 /8" glass RH Ea. $497 $7 $876 $965 $707 902.70 /2" glass LH Ea. $497 $7 $876 $965 $707 902.7 /2" glass RH Ea. $497 $7 $876 $965 $707 *shown Top Door Offset Patch Fitting Type A & F shortened 9/2" Top & Side 2. 902.4 /8" glass LH* Ea. $227 $24 $56 $567 $22 902.5 /8" glass RH Ea. $227 $24 $56 $567 $22 902.66 /2" glass LH Ea. $227 $24 $56 $567 $22 902.67 /2" glass RH Ea. $227 $24 $56 $567 $22 *shown Bottom Door Offset Patch Fitting Type A & F shortened 9/2" Bottom & Side. 902.04 /8" glass LH* Ea. $24 $5 $552 $575 $ 902.05 /8" glass RH Ea. $24 $5 $552 $575 $ 902.62 /2" glass LH Ea. $24 $5 $552 $575 $ 902.6 /2" glass RH Ea. $24 $5 $552 $575 $ *shown Exit MANET Slidiing Handles and inside NOTES: Handing for angle or fin fittings viewed from outside and above as shown in diagram. Please specify glass thickness when ordering. left outside right D-4

Fittings for Single Acting 5/6" (8 mm), /8" (0 mm), and /2" (2 mm) Doors Model Top and Bottom Door Offset Patch Fitting Set Item Number Description U/M Type A & F Clear 0 D/B 08 Similar to S.B. 05 Similar to S.S.S 07 42. 92.040 Left Hand (shown) Pr. $220 $252 $252 $297 92.04 Right Hand Pr. $220 $252 $252 $297 Complete set includes: Top Corner Hinge Bottom Corner Hinge (height adjustable) Top Pivot Floor Pivot Exit MANET Slidiing Handles and NOTES: Handing for angle or fin fittings viewed from outside and above as shown in diagram. Maximum door weight 76 lb (80 kg). Maximum door width 4-/4" (00 mm). Please specify glass thickness when ordering. left inside outside right D-5

Exit MANET Slidiing Handles and D-6

Closers & Section E Product Description Page RTS88 Overhead Concealed Covers E-2 RTS88 E- to E-6 BTS Floor Closers E-7 BTS E-8 to E- Shim Packages For -9/6" Web Depths E-4 ED400-IG Shear Locks, Locks, Cylinders, Strikes, Saddles, Thresholds E-5 to E-6 Exit MANET Slidiing Handles and Concealed Low Energy In-Ground Swing Door Operator E-7 E-

Closers & RTS88 Overhead Concealed Covers Item Number Description U/M Mill 00 Clear 0 RTS88 Closers - Barrier Free Exterior (BFE) 928.07 05 HO (5 mm ext.)* Ea. $20 928.09 05 NHO Ea. $20 (5 mm ext.)* 928.06 05 HO Ea. $20 928.08 05 NHO Ea. $20 RTS88 Closers - Barrier Free Interior (BFI) RTS88 Closers - Hold Open 928.02 05 HO (5 mm ext.)* Ea. $20 928.02 05 NHO Ea. $20 (5 mm ext.)* 928.020 05 HO Ea. $20 928.022 05 NHO Ea. $20 928.029 90 (5 mm ext.) Size * Ea. $20 928.00 05 (5 mm ext.) Size * Ea. $20 928.025 05 Size Ea. $20 928.026 05 Size 4 Ea. $20 928.027 90 Size Ea. $20 928.028 90 Size 4 Ea. $20 RTS88 Closers - No Hold Open 928.07 05 (5 mm ext.) Size * Ea. $20 928.08 90 (5 mm ext.) Size * Ea. $20 928.02 05 Size Ea. $20 928.0 05 Size 4 Ea. $20 928.04 90 Size 2 Ea. $20 928.05 90 Size Ea. $20 928.06 90 Size 4 Ea. $20 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze Pol. 60 Satin 600 RTS88 Closers Covers** Model Cover when installed in 856 928.05 Wood Header Ea. $24 $24 $79 $69 $8 Cover when installed in 856 928.052 Alum inum Header Ea. $4 $86 8575 928.05 Non-Fabricated item, ships in business day Cover when installed in Steel Header Ea. $4 $92 $90 $07 $5 * DORMA Glas requires the use of 5 mm extended spindles with ALL Herculite glass door applications when an OHCC is specified. This allows for optimum spindle bite. Inadequate bite can cause premature wear on the closers and hardware, potentially voiding warranty. Spring sizes other than what is listed above are available please consult factory. **Always use an auxillary stop in conjunction with RTS88 installations. Exit MANET Slidiing Handles and E-2

Closers & RTS88 Brackets and Arms Item Number Description U/M Mill 00 Clear 0 Brackets Round Angle Bracket 928.02 (screws not included) Ea. $2 928.997 Screw Package Ea. $ Corner Bracket 928.0 (screws not included) Ea. $4 928.999 Screw Package Ea. $ 928.04 Slotted Angle Bracket (screws not included) Ea. $2 Top Arms Model 928.997 Screw Package Ea. $ Item Number Description U/M Mill 00 Clear 0 887 928.004 Rail Top Arm End Load 5/8" web depth Ea. $50 888 928.00 886 928.006 886S 928.00 854 228.00 885 928.002 Rail Top Arm End Load /4" web depth Ea. $50 Rail Top Arm End Load 7/8" web depth Ea. $4 Rail Top Arm End Load 7/8 web depth Ea. $74 Rail Top Arm End Load 7/8" web depth Ea. $48 Rail Top Arm End Load " web depth Ea. $42 Exit MANET Slidiing Handles and 88 928.007 Rail Top Arm Side Load /2" web depth Ea. $49 Non-Fabricated item, ships in business day. E-

Closers & RTS88 Arms and Pivots Top Arms Model Item Number Description U/M Mill 00 Clear 0 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze Pol. 60 Satin 600 882 928.008 Rail Top Arm Side Load 5/8" web depth Ea. $99 Top Pivots 882 928.009 HD8062 927.066 HD8062 TOP 927.065 HD8062 LOWER 927.050 8062.5 927.06 8062 PT2 927.064 8062 LOWER 927.062 E8062 927.06 Rail Top Slide Arm /4" Offset /4" web depth Ea. $58 Walking Beam Pivot with 5/8" Pin COMPLETE Heavy Duty Ea. $75 $75 $75 $75 $75 Top Walking Beam Pivot with 5/8" Pin (HD) Ea. $86 Top Walking Beam Pivot Door Portion (5/8" Pin) Ea. $78 Top Walking Beam Pivot with /2" Pin Ea. $4 Top Walking Beam Pivot with 5 mm Pin Ea. $6 Top Walking Beam Pivot Door Portion (5 mm Pin) Ea. $24 Top Walking Beam Pivot Electrified (5/8" Pin) Ea. $406 $406 $406 $406 $406 Exit MANET Slidiing Handles and 8062COV 227.004 Top Walking Beam Pivot Cover Plate Ea. $ $ $ $ $ Non-Fabricated item, ships in business day. E-4

Closers & RTS88 Pivots Model Item Number Description U/M Mill 00 Clear 0 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze Pol. 60 Satin 600 25. PT25 90.5 90.6 Top Pivot with Threaded Rod Ea. $9 Top Pivot with 6 mm Mounting Plate Ea. $26 $26 25.6 PT24 90.92 mm Mounting Plate Ea. $26 $26 (08 only) $5 (50 only) $5 (700 only) /4" Top Offset Pivot 7520 929.04 /4" Top Offset Pivot Ea. $90 $90 $90 $90 $90 -/2" Top Offset Pivot 520 929.09 -/2" Top Offset Pivot Ea. $65 $65 $65 $65 $65 Non-Fabricated item, ships in business day. Exit MANET Slidiing Handles and E-5

Closers & Inserts and Header Stops Top Inserts Model 55.0 904.60 Item Number Description U/M Mill 00 Clear 0 Top Rail Insert for 5 mm Diameter Pin Ea. $24 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze Pol. 60 Satin 600 55.4 904.6 Top Rail Insert RTS Ea. $85 55.9 904.09 9.2 90. 9. 90.25 Top Rail Adj. Insert Ea. $52 Top Fitting Insert for 5 mm Pin Ea. $5 Top Fitting Pivot Insert Ea. $9 Header Stops Extension 55.4 90.999 55.4 90.26 55.42 90.27 852E 928.06 Top Fitting Sideload Insert RTS88 Ea. $2 Top Fitting Insert Blank Ea. $5 Top Fitting Insert Stop Ea. $9 2.989 Header Stop Ea. $9 $9 $29 $29 $6 RTS88 Spindle Extension Ea. $7 Exit MANET Slidiing Handles and Non-Fabricated item, ships in business day. E-6

Closers & BTS Floor Closers Item Number Description U/M Mill 00 Clear 0 BTS75V Closers 927.0 HO 05 Ea. $5 927.04 HO 90 Ea. $5 927.08 NHO Ea. $5 BTS75V Closers Barrier Free (BF) 927.06 HO 90 Ea. $5 927.07 NHO Ea. $5 BTS80 Closers 927.020 927.02 927.09 ANSI Size 4 (Standard) Ea. $567 ANSI Size 6 (Strong) Ea. $567 ANSI Size (BFE) Ea. $567 BTS80 Closers - EMB (Electromagnetic Hydraulic Hold Open) 927.029 927.00 BTS80F Closers (Fire Rated) 927.024 927.025 ANSI Size 5 Left Hand Ea. $,428 ANSI Size 5 Right Hand Ea. $,428 ANSI Size 5 Left Hand Ea. $59 ANSI Size 5 Right Hand Ea. $59 Non-Fabricated item, ships in business day. Exit MANET Slidiing Handles and NOTES Cement box included with all BTS closers listed above. Additional cement boxes available, refer to page E-8. EMB handing determined from push side of door. E-7

Closers & BTS Floor Closer Covers & Cement Boxes Model Item Number Description U/M Mill 00 Clear 0 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze Pol. 60 Satin 600 Covers & Cement Boxes 750 927.04 BTS75V Cover Ea. 740 227.00 BTS80 Cover Ea. 927.007 BTS75V Cement Box Ea. $40 $95 (602 only) $57 $57 $95 $8 (602 only) $8 $80 $80 927.008 BTS80 Cement Box Ea. $4 TP75V 927.049 TP8OCH 927.046 TP8OLH 927.047 TP8ORH 927.048 Non-Fabricated item, ships in business day. BTS75V Terrazzo Cover CH Ea. $256 BTS80 Terrazzo Cover CH Ea. $256 BTS80 Terrazzo Cover LH /4" Offset Ea. $289 BTS80 Terrazzo Cover RH /4" Offset Ea. $289 Exit MANET Slidiing Handles and E-8

Closers & BTS Spindles Bottom Spindles Model Item Number Description U/M Mill 00 Clear 0 7400 927.09 5/6" Spindle Ea. $0 74005 927.092 /2" Spindle Ea. $0 74007 927.09 5/8" Spindle Ea. $0 7400 927.094 /4" Spindle Ea. $44 7402 927.095 /6" Spindle Ea. $44 7405 927.096 7/8" Spindle Ea. $44 74020 927.097 -/8" Spindle Ea. $44 74025 927.098-5/6" Spindle Ea. $44 7400 927.099 -/2" Spindle Ea. $44 7405 927.00 -/6" Spindle Ea. $44 74040 927.0-7/8" Spindle Ea. $44 74045 927.02 2-/6" Spindle Ea. $44 74050 927.0 2-5/6" Spindle Ea. $44 Exit MANET Slidiing Handles and Non-Fabricated item, ships in business day. E-9

Closers & BTS Spindles Model Bottom Offset Spindles Item Number Description U/M Mill 00 Clear 0 8000 927.04 5/6" Spindle Left Hand Ea. $2 927.05 5/6" Spindle Right Hand Ea. $2 80005 927.06 /2" Spindle Left Hand Ea. $2 927.07 /2" Spindle Right Hand Ea. $2 8000 927.08 /4" Spindle Left Hand Ea. $2 927.09 /4" Spindle Right Hand Ea. $2 8005 927.0 7/8" Spindle Left Hand Ea. $44 927. 7/8" Spindle Right Hand Ea. $44 80020 927.2 -/8" Spindle Left Hand Ea. $44 927. -/8" Spindle Right Hand Ea. $44 80025 927.4-5/6" Spindle Left Hand Ea. $44 927.5-5/6" Spindle Right Hand Ea. $44 8000 927.6 -/2" Spindle Left Hand Ea. $44 927.7 -/2" Spindle Right Hand Ea. $44 Non-Fabricated item, ships in business day. Exit MANET Slidiing Handles and E-0

Closers & BTS Arms and Pivots Model Item Number Description U/M Mill 00 Clear 0 Bottom Arms 742 227.00 Bottom Arm Ea. $9 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze Pol. 60 Satin 600 Bottom / Floor Pivots 7422 227.002 Bottom Arm Ea. $48 Bottom /4" Offset Arm COMPLETE* 229.00 Left Hand Ea. $56 $56 $56 $56 $56 752 229.002 Right Hand Ea. $56 $56 $56 $56 $56 55.6 90.06 90.079 55.5 927.057 55.5 ext 5 mm 927.060 55.5 ext 0 mm 927.058 929.002 /4" Offset Arm Ea. $8 752 Offset Arm Cover COV 929.006 Left Hand Ea. $8 $8 $8 $8 $8 929.007 Right Hand Ea. $8 $8 $8 $8 $8 Bottom -/2" Offset Arm COMPLETE* 229.0 Left Hand Ea. $46 $46 $47 $47 $47 52 229.02 Right Hand Ea. $46 $46 $47 $47 $47 929.06 -/2" Offset Arm Ea. $2 52 COV 929.07 Offset Arm Cover Left Hand Ea. $26 $26 $26 $26 $26 929.08 Right Hand Ea. $26 $26 $26 $26 $26 745N/745N 927.00 Bottom Slide Arm Ea. $85 Adjustable Floor Pivot 5/6" to /2" Ea. $59 Adjustable Floor Pivot Cover Plate Ea. $8 $8 $2 $22 Floor Pivot 5/6" Clearance Ea. $9 Floor Pivot /2" Clearance (5 mm ext.) Ea. $74 Floor Pivot //6" Clearance (0 mm ext.) Ea. $74 Exit MANET Slidiing Handles and 55.5 ext 5 mm 927.059 Floor Pivot 5//6" Clearance (5 mm ext.) Ea. $99 Non-Fabricated item, ships in business day. *DORMA offset handing is unique to the industry, please verify actual swing prior to ordering. E-

Closers & BTS Pivots Model Item Number Description U/M Mill 00 Clear 0 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze Pol. 60 Satin 600 Floor Pivot with /4" Clearance 747K 229.00 COMPLETE Ea. $64 $64 $64 $6 $64 Floor Pivots 929.008 Floor Pivot Cover Ea. $20 $20 $2 $2 $20 929.07 747K 5 mm ext. 929.08 8852 928.055 8855 928.058 885 928.056 8856 928.059 8857 928.060 Non-Fabricated item, ships in business day. Floor Pivot /4" Clearance Ea. $42 Floor Pivot 5/6" Clearance (5 mm ext.) Ea. $50 Bottom Pivot 7/8" Web Depth (Adj. /8"-5/8") Ea. $ Threshold Pivot 7/8" Web Depth (Adj. /6"-7/6") Ea. $6 Bottom Pivot -9/6" Web Depth (Adj. /4"-/2") Ea. $ Threshold Pivot -/8" Web Depth (Adj. /6"-7/6") Ea. $6 Bottom Pivot -9/6" Web Depth (Adj. /6"-7/6") Ea. $4 Exit MANET Slidiing Handles and E-2

Closers & BTS Inserts Model Item Number Description U/M Mill 00 Clear 0 Bottom Inserts 55. 904.020 Rail Bottom Insert Ea. $27 Exit MANET Slidiing Handles and 9. 90.05 Fitting Bottom Insert Ea. $9 Non-Fabricated item, ships in business day. E-

Closers & DORMA Easi-Align Shim Item Number Description U/M Mill 00-9/6" Web Depth 925.87 Shim; Used with Top End Load Arm 928.006 (Model 886) Ea. $54 925.84 925.85 Shim; Used with Top Insert 904.60 (Model 55.0) or Top Adjustable Insert 904.09 (Model 55.9) Ea. $47 Shim; Used with Adj. Floor Pivot 928.055 or Adj. Threshhold Pivot 928.058 (Model 8855) Ea. $54 925.86 Shim; Used with Bottom Arm 227.002 (Model 7422) Ea. $47 Exit MANET Slidiing Handles and E-4

Closers & Shear Locks, Locks, Cylinders Item Number Description U/M Mill 00 Clear 0 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Shear Locks 9.025 EMSL 2765 Shear Lock not installed Ea. $975 Locks 925.09 Brass Lock -9/6" 5/8" Throw Ea. $24 925.08 925.07 Brass Lock -7/8" 5/8" Throw Ea. $27 Brass Lock -7/8" Long Throw* 5/8" Throw Ea. $5 925.02 Extended Lock Bolt* 7/8" Throw Ea. $8 925.022 Square Lock Bolt Ea. $5 Cylinders 225.999 225.998 225.997 225.996 Mortise Key Cylinder/ Split Ring (DRS) Mortise Thumbturn Cylinder/Split Ring (DRS) Mortise Key Cylinder/ Blocking Ring (AR20) Mortise Thumbturn Cylinder/Blocking Ring (AR20) Ea. Ea. Ea. Ea. 92.070 Mortise Cylinder Rose Ea. $4 (0 only) $4 $4 $5 $4 (0 only) $4 $4 $5 $6 (0 only) $6 $6 $6 $6 (0 only) $6 $6 $6 $ (0 only) $ $4 $4 90.00 Profile Key Cylinder Ea. $8 $59 Profile Thumbturn Cyl. 90.002 Right Handed Cam Ea. $78 $66 90.004 Left Handed Cam Ea. $78 $66 Exit MANET Slidiing Handles and * When retracted, long throw extends beyond lock base by /4". Non-Fabricated item, ships in business day. NOTES: Cylinders can be keyed alike for an additional charge of $55.00 net / each. LH housing requires RH profile thumbturn cylinder; RH housing requires LH profile thumbturn cylinder. E-5

Closers & Strikes, Saddles, Threshold Strikes Item Number Description U/M 92.0 Mill 00 Clear 0 D/B 08 BK 09 Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Bronze Pol. 60 Satin 600 Dust Proof Strike Overall Length -/2" Ea. $26 $26 $26 $26 $5 925.40 Strike Plate Ea. $7 $7 $8 $7 Saddles and Thresholds 92.908 Adjustable Strike Ea. $27 925.058 /2" 4" Threshold Available @ 6' Length Non-Fabricated item, ships in business day. Ft. $4 (00 only) Exit MANET Slidiing Handles and NOTES Must specify length when ordering. DORMA will cut to specified size, priced per foot only. Miter cut prep charge $20.00 net per cut. Maximum length for extrusions is 44" (.66 m) before requiring a splice joint; 20" ( m) for Brass and Bronze finishes. E-6

Closers & ED400-IG Concealed Low Energy In-Ground Swing Door Operator Base package includes: Type B case; 5-/2" long 7" wide 7" deep galvanized steel casing (width includes flanges) Low energy swing door operator Microprocessor controller with 4-quadrant motor and digital encoder Fully adjustable bottom door pivot Push-N-Go technology Lock delay output for electrified devices Integrated sensor communication and inhibiting Advanced power assist close options Indefinite power hold close ability Three position program switch with connecting harness: Hold open / On / Off Applications Single Acting Utilizes standard 2-/4" pivot point from finished jamb Item Number Description U/M Galvanized Steel 90.50 ED400-IG RHR Swing #4 Single Door Ea. $ 0,55 90.502 ED400-IG LHR Swing # Single Door Ea. $ 0,55 90.50 Applications Single Acting Pivot point dependent on offset application used 90.52 90.522 90.52 ED400-IG Pair of Doors Ea. $ 20,850 ED400-IG RH Swing # Single Door Ea. $ 0,55 ED400-IG LH Swing #4 Single Door Ea. $ 0,55 ED400-IG Pair of Doors Ea. $ 20,850 Exit MANET Slidiing Handles and NOTES Uses DORMA Glas standard 227.002 (7422) bottom arm. Door and header hardware sold separately, shown for closer handing / function only. Threshold and/or Terrazzo covers are not supplied by DORMA Glas. E-7

Closers & Exit MANET Slidiing Handles and E-8

Housings & Handles Section F Housings & Handles for Interior Tempered Glass Doors Product Description Page Studio Housings Studio Rondo, Studio Classic, and Studio Gala F-2 to F- Junior Office Housings Latch Housings and Accessories F-4 Junior Office Housings Classic Housings and Accessories F-5 Housing Accessories Levers and Europrofile Cylinders F-6 ARCOS Housings & Accessories Center Lock & Strike Housing ARCOS Studio, ARCOS Office Levers and Europrofile Cylinders F-7 to F-8 Heavy-Duty Mortise Lockset Housing with Cylinder/Keying & Lever Design Options F-9 to F-2 Locking Ladder Pull Handles Tubular Locking & Non-Locking Pull Handles F- to F-5 TG Pull Handles and Fixings / Roses F-6 to F-20 MANET Handles F-2 ARCOS & BEYOND Handles F-22 Handles, Pulls, Knobs Tubular & Solid Pull Handles, Finger Pulls & Knobs F-2 to F-24 Exit MANET Slidiing Handles and F-

Housings & Handles Studio Rondo and Studio Classic Latch Housings and Strikes Item Number Description U/M Clear 0 D/B 08 BK 09 Brass Pol. 502 Varnished Chrome Pol. 50 similar to S.S.S. 07 Studio Rondo Housings for Jambs and Sidelite Applications Non-Locking 90.200 /8" (0 mm) Ea. $229 $05 $444 $444 $05 20.200 /2" (2 mm) Ea. $229 $05 $444 $444 $05 Non-Locking, Lever Forward 90.20 /8" (0 mm) Ea. $229 $05 $444 $444 $05 20.00 /2" (2 mm) Ea. $229 $05 $444 $444 $05 Locking (prepared for Europrofile cylinder) 90.202 /8" (0 mm) Ea. $229 $05 $444 $444 $05 20.00 /2" (2 mm) Ea. $229 $05 $444 $444 $05 Locking, Toilet Door, thumbturn cylinder included 90.206 /8" (0 mm) Ea. $ $90 $660 $660 $45 20.206 /2" (2 mm) Ea. $ $90 $660 $660 $45 Strike Box for Sidelites 90.220 /8" (0 mm) Ea. $247 $5 $454 $454 $0 20.004 /2" (2 mm) Ea. $247 $5 $454 $454 $0 Item Number Description U/M Studio Classic Housings for Jambs and Sidelite Applications Clear 0 Black 09 similar to S.B. 05 similar to S.S.S. 07 Non-Locking 90.00 /8" (0 mm) Ea. $229 $90 $260 $05 20.02 /2" (2 mm) Ea. $229 $90 $260 $05 Non-Locking, Lever Forward 90.002 /8" (0 mm) Ea. $229 $90 $260 $05 20.0 /2" (2 mm) Ea. $229 $90 $260 $05 Locking (prepared for Europrofile cylinder) 90.00 /8" (0 mm) Ea. $229 $90 $260 $05 20.0 /2" (2 mm) Ea. $229 $90 $260 $05 Locking, Toilet Door, thumbturn cylinder included 90.006 /8" (0 mm) Ea. $ $54 $90 $45 20.006 /2" (2 mm) Ea. $ $54 $90 $45 Strike Box for Sidelites 90.005 /8" (0 mm) Ea. $247 $422 $48 $0 20.04 /2" (2 mm) Ea. $247 $422 $48 $0 Exit MANET Slidiing Handles and Non-Fabricated item, ships in business day. NOTES Above housings are prepared for all levers without roses; see page F-6. Above Studio Housings are shipped right handed. Field adjustable to left hand. LH Housing requires RH cylinder; RH Housing requires LH cylinder. F-2

Housings & Handles Studio Gala Latch Housings, Strikes, and Accessories Item Number Description U/M Clear 0 Brass Pol. 502 Varnished Chrome Pol. 50 similar to S.S.S. 07 Studio Gala Housings for Jamb Applications Non-Locking 99.00 /8" (0 mm) Ea. $229 $444 $444 $05 29.00 /2" (2 mm) Ea. $229 $444 $444 $05 Non-Locking, Lever Forward 99.0 /8" (0 mm) Ea. $229 $444 $444 $05 29.0 /2" (2 mm) Ea. $229 $444 $444 $05 Locking (prepared for Europrofile cylinder) 99.02 /8" (0 mm) Ea. $229 $444 $444 $05 29.02 /2" (2 mm) Ea. $229 $444 $444 $05 Item Number Description U/M Clear 0 D/B 08 similar to S.B. 05 Brite Silver 0 similar to S.S.S. 07 Accessories for Studio Rondo, Studio Classic and Studio Gala Jamb Applications Corner Strike Plate 90.40 24 mm return Ea. $24 $2 $2 $29 $5 90.4 6 mm return Ea. $24 $29 Strike Plate 90.42 Steel Ea. $6 $6 90.422 Brass Ea. $6 $6 Item Number Description U/M Clear 0 Studio Gala Housings for Sidelite Applications (Strike plate not needed) Brass Pol. 502 Varnished Chrome Pol. 50 similar to S.S.S. 07 Non-Locking 99.05 /8" (0 mm) Ea. $254 $495 $495 $49 29.05 /2" (2 mm) Ea. $254 $495 $495 $49 Non-Locking, Lever Forward 99.008 /8" (0 mm) Ea. $254 $495 $495 $49 29.008 /2" (2 mm) Ea. $254 $495 $495 $49 Locking (prepared for Europrofile cylinder) 99.06 /8" (0 mm) Ea. $254 $495 $495 $49 29.06 /2" (2 mm) Ea. $254 $495 $495 $49 Strike Box for Sidelites 99.007 /8" (0 mm) Ea. $24 $45 $45 $299 29.007 /2" (2 mm) Ea. $25 $454 $454 $27 Exit MANET Slidiing Handles and Non-Fabricated item, ships in business day. NOTES Above housings are prepared for all levers without roses; see page F-6. Above Studio Housings are shipped right handed. Field adjustable to left hand. LH Housing requires RH cylinder; RH Housing requires LH cylinder. F-

Housings & Handles Junior Office Latch Housings and Accessories Item Number Description U/M Junior Office Locks for Strikes Accessories Clear 0 Black 09 Brass Pol. 502 Varnished Chrome Pol. 50 Satin 500 similar to S.S.S. 07/ to S.B. 05 Locking (prepared for Europrofile cylinder) 8.260 /8" (0 mm) LH Ea. $254 $52 $644 $644 $25 8.26 /8" (0 mm) RH Ea. $254 $52 $644 $644 $25 2.260 /2" (2 mm) LH Ea. $254 $52 $644 $644 $25 2.26 /2" (2 mm) RH Ea. $254 $52 $644 $644 $25 Non-Locking 8.264 /8" (0 mm) LH Ea. $200 $276 $27 8.265 /8" (0 mm) RH Ea. $200 $276 $27 2.264 /2" (2 mm) LH Ea. $200 $276 $27 2.265 /2" (2 mm) RH Ea. $200 $276 $27 Strike Housing 8.206 /8" (0 mm) LH Ea. $260 $7 $57 $57 $ 8.207 /8" (0 mm) RH Ea. $260 $7 $57 $57 $ 2.206 /2" (2 mm) LH Ea. $260 $7 $57 $57 $ 2.207 /2" (2 mm) RH Ea. $260 $7 $57 $57 $ 9. Strike Plate (Double) Ea. $5 8.26 Lock 8.206 Strike EXTERIOR INTERIOR 8.260 Lock 8.207 Strike 8.260 Lock 8.207 Strike EXTERIOR INTERIOR 8.26 Lock 8.206 Strike Exit MANET Slidiing Handles and NOTES DORMA handing is unique to the industry, please verify actual swing prior to ordering. LH housings and LH strikes shown above. Above housings are prepared for all levers without roses, see page F-6. LH Housing requires RH cylinder; RH Housing requires LH cylinder. F-4

Housings & Handles Junior Office Classic Latch Housings and Accessories Item Number Description U/M Junior Office Locks for Strikes Clear 0 Black 09 similar to S.B 05 similar to S.S.S 07 Locking (prepared for Europrofile cylinder) 8.280 /8" (0 mm) LH Ea. $254 $454 $7 $7 8.28 /8" (0 mm) RH Ea. $254 $454 $7 $7 2.280 /2" (2 mm) LH Ea. $254 $454 $7 $7 2.28 /2" (2 mm) RH Ea. $254 $454 $7 $7 Non-Locking 8.284 /8" (0 mm) LH Ea. $228 $55 $247 $27 8.285 /8" (0 mm) RH Ea. $228 $55 $247 $27 2.284 /2" (2 mm) LH Ea. $228 $55 $247 $27 2.285 /2" (2 mm) RH Ea. $228 $55 $247 $27 Strike Housing 8.286 /8" (0 mm) LH Ea. $2 $55 $26 $ 8.287 /8" (0 mm) RH Ea. $2 $55 $26 $ 2.286 /2" (2 mm) LH Ea. $2 $55 $26 $ 2.287 /2" (2 mm) RH Ea. $2 $55 $26 $ Accessories 9. Strike Plate (Double) Ea. $5 $54 8.28 Lock 8.286 Strike EXTERIOR INTERIOR 8.280 Lock 8.287 Strike (08 only) 8.280 Lock 8.287 Strike EXTERIOR INTERIOR 8.28 Lock 8.206 Strike Exit MANET Slidiing Handles and NOTES DORMA handing is unique to the industry, please verify actual swing prior to ordering. LH housings and LH strikes shown above. Above housings are prepared for all levers without roses, see page F-6. LH Housing requires RH cylinder; RH Housing requires LH cylinder. F-5

Housings & Handles DORMA Studio and Junior Accessories Lever and Knob Sets for Housings Model Item Number Description U/M Clear 0 D/B 08 BK 09 Brass Pol. 502 Varnished Chrome Pol. 50 similar to S.S.S. 07/ similar to S.B. 05 Sets of Levers 47 90.4 Flat Ea. $54 $8 $228 $70 467. 90.0 Tubular Ea. $2 $74 $260 $6 90.22 Ea. $46 $74 468 90.00 Cantilevered Ea. $225 $244 $62 (07 only) 450.20 90.04 Flat with Knob Ea. $24 $228 $8 90.00 Angular Ea. $49 $8 $75 99.009 Beveled Ea. $02 $228 $244 $6 (07 only) 450.0 90.05 Knob Round Ea. $ $52 $ Additional lever styles available; see the Housings and Handles for Interior Tempered Glass Doors brochure for listing. Model Item Number Description U/M Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Europrofile Accessories 500 90.00 Profile Key Cylinder Ea. $8 $59 90.002 Profile Thumbturn Cyl. Right Handed Cam Ea. $78 $66 Exit MANET Slidiing Handles and 50 90.004 Left Handed Cam Ea. $78 $66 Non-Fabricated item, ships in business day. NOTES Cylinders can be keyed alike for an additional charge of $55.00 net / each. LH Housing requires RH cylinder; RH Housing requires LH cylinder. F-6

Housings & Handles ARCOS Housings Item Number Description U/M ARCOS Studio Housings for Jamb and Sidelite Applications EV- 4 D/B 08 similar to S.B. 05 Brite Silver 0 similar to S.S.S 07 Non-Locking 924.200 /8" (0 mm) Ea. $254 $94 $26 $29 $05 224.200 /2" (2 mm) Ea. $254 $94 $26 $29 $05 Non-Locking, Lever Forward 924.20 /8" (0 mm) Ea. $254 $94 $26 $29 $05 224.20 /2" (2 mm) Ea. $254 $94 $26 $29 $05 Locking (prepared for Europrofile cylinder) 924.202 /8" (0 mm) Ea. $254 $94 $26 $29 $05 224.202 /2" (2 mm) Ea. $254 $94 $26 $29 $05 Locking (prepared for Europrofile cylinder) 924.206 /8" (0 mm) Ea. $78 $5 $94 $6 $450 224.206 /2" (2 mm) Ea. $78 $5 $94 $6 $450 Strike Box for Sidelites 924.220 /8" (0 mm) Ea. $224 $42 $20 $26 $267 224.220 /2" (2 mm) Ea. $224 $42 $20 $26 $267 ARCOS Office Housings for Jamb and Sidelite Applications Locking (prepared for Europrofile cylinder) 825.260 /8" (0 mm) LH Ea. $269 $482 $6 $40 825.26 /8" (0 mm) RH Ea. $269 $482 $6 $40 225.260 /2" (2 mm) LH Ea. $269 $482 $6 $40 225.26 /2" (2 mm) RH Ea. $269 $482 $6 $40 Non-Locking Strike Box for Sidelites 825.264 /8" (0 mm) LH Ea. $2 $80 $266 $289 825.265 /8" (0 mm) RH Ea. $2 $80 $266 $289 225.264 /2" (2 mm) LH Ea. $2 $80 $266 $289 225.265 /2" (2 mm) RH Ea. $2 $80 $266 $289 Strike Box for Sidelites 825.206 /8" (0 mm) LH Ea. $25 $96 $05 $27 825.207 /8" (0 mm) RH Ea. $25 $96 $05 $27 225.206 /2" (2 mm) LH Ea. $25 $96 $05 $27 225.207 /2" (2 mm) RH Ea. $25 $96 $05 $27 Exit MANET Slidiing Handles and NOTES Above housings are prepared for all levers without roses, see page F-8. Above ARCOS Studio Housings are shipped right handed. Field adjustable to left hand. ARCOS office housings LH shown. LH Housing requires RH cylinder; RH Housing requires LH cylinder. F-7

Housings & Handles ARCOS Studio/Office Accessories Item Number Description U/M EV- 4 D/B 08 similar to S.B. 05 Brite Silver 0 similar to S.S.S 07 Sets of Levers for Locks with Strikes 924.0 Tubular, Mitered Ea. $55 $20 $59 $50 $64 924.02 Tubular, Oval Ea. $55 $20 $59 $50 $64 Model 924.0 Chiseled Ea. $72 $247 $78 $7 $8 Item Number Description U/M Brass Pol. 50 Satin 599 Pol. 70 Satin 700 Europrofile Accessories 500 90.00 Profile Key Cylinder Ea. $8 $59 50 90.002 Non-Fabricated item, ships in business day. Profile Thumbturn Cyl. Right Handed Cam Ea. $78 $66 90.004 Left Handed Cam Ea. $78 $66 Exit MANET Slidiing Handles and NOTES Cylinders can be keyed alike for an additional charge of $55.00 net / each. LH Housing requires RH cylinder; RH Housing requires LH cylinder. F-8

Housings & Handles Center Lock & Strike Housing /2" (2 mm) Glass Center Lock Housing CL M905 D KD 700 Item Number Order lever separately; see page F- Door Swing* (per Swing Chart) Description U/M Satin 700 Office Entry Cylinder ADA Thumb Turn; D Conventional Cylinder; Keyed Different (KD) 2.940 Swing Type 5 R Hand Ea. $976 2.94 Swing Type 6 L Hand Ea. $976 2.942 Swing Type R Hand Reverse Ea. $976 2.94 Swing Type 4 L Hand Reverse Ea. $976 Center Lock Housing CL M9050 D KD 700 Office Entry Cylinder Auxilliary Latch; D Conventional Cylinder; Keyed Different (KD) Order lever separately; see page F- Center Lock Housing CL M9070 D 700 Center Lock Housing CL M900 700 2.944 Swing Type 5 R Hand Ea. $956 2.945 Swing Type 6 L Hand Ea. $956 2.946 Swing Type R Hand Reverse Ea. $956 2.947 Swing Type 4 L Hand Reverse Ea. $956 Order lever separately; see page F- Classroom Latch bolt operates trim, either side, except when outside trim locked by key outside; D Conventional Cylinder; Keyed Different (KD) 2.962 Swing Type 5 R Hand Ea. $956 2.96 Swing Type 6 L Hand Ea. $956 2.964 Swing Type R Hand Reverse Ea. $956 2.965 Swing Type 4 L Hand Reverse Ea. $956 Order lever separately; see page F- Passage/Closet Latch bolt operated by trim either side 2.948 Swing Type 5 R Hand Ea. $86 2.949 Swing Type 6 L Hand Ea. $86 2.950 Swing Type R Hand Reverse Ea. $86 2.95 Swing Type 4 L Hand Reverse Ea. $86 * Please use the swing chart to verify actual swing prior to ordering. NOTES Default cylinder for CL M905 and CL M9050 will be conventional cylinder, type D, keyed different (KD); specify other cylinder types, if required (see page F-). Lever must be ordered separately; all lever options shown on page F-. Swing Chart 6 5 INTERIOR 4 EXTERIOR Exit MANET Slidiing Handles and F-9

Housings & Handles Center Lock & Strike Housing /2" (2 mm) Glass Item Number Door Swing* (per Swing Chart) Description U/M Satin 700 Strike Housing Housing with strike for glass sidelite, non-handed 9.92 Strike Housing Ea. $72 Strikes Wall Strike 2.99 Strike for wall installation, no sidelite Ea. $55 Non-Fabricated item, ships in business day. Exit MANET Slidiing Handles and F-0

Housings & Handles Center Lock & Strike Housing Optional Lever Designs Item Number Description U/M Satin 700 Standard Cast or Forged Levers 5 2.952 LAA Ea. N/C 2.95 LRA Ea. N/C 2.954 LCA Ea. N/C 2.955 LTA Ea. N/C 2.956 LGA Ea. N/C 2.957 LDA Ea. N/C 2.958 LNA Ea. N/C Custom Cast or Forged Levers 5 2.959 L0A Ea. $25 2.960 LA Ea. $25 2.96 L4A Ea. $25 5 Custom Fabricated; lead time up to 5 business days. Exit MANET Slidiing Handles and F-

Housings & Handles Center Lock & Strike Housing Cylinder Types, Keying Options, and Keyways Cylinder Option Description List Add/Deduct Conventional Cylinders (non-interchangeable core) D Conventional Cylinder Example: CL ML905D N/C KD Keyed differently to a random combination; SC keyway with 2 keys (default) N/C KA2 Keyed alike in pairs to a random combination; SC keyway with 2 keys " KA4 Keyed alike in sets of 4 to a random combination; SC keyway with 2 keys " 0-Bit Operated by a key blank for easy rekeying; SC, SE keyway with 2 keys " 0-Bit Operated by a key blank for easy rekeying; D00 keyway Keys sold separately " 0-Bit Operated by a key blank for easy rekeying; AA, CA, CB, CC, CD, CE, RA, RB, GA, SF, WA, YA, YG keyways with 2 keys $0 NSK Non-stock keyed KA quantities other than KA2/KA4; SC keyway with 2 keys $0 MKD Master keyed or SKD, SC, SE, or D00 keyway Keys sold separately $0 CMK Construction master keyed single cylinder locks Keys sold separately $ L Center Lock less conventional cylinder and collar Example: CL ML905L Deduct $6 Small Format Interchangeable Core Cylinders J Center Lock with disposable plastic SFIC construction core Example: CL ML905J N/C T C Center Center Lock with keyed temporary SFIC construction core (cores may be returned for $5 credit) Keys sold separately Example: CL ML905T $26 Lock with combinated SFIC core installed at the factory ; BA (default), BB, BC, BD, BE, BF, BG, BH, BJ, BK, BL, BM, BQ, D00 keyway Keys sold separately Example: CL ML905C $4. For uncombinated cores, UNC, cores must be ordered separately, see Cylinders, Keys, and Keying. Locks will be supplied w/ plastic construction core, Option J. Part # Description List Price 450 Cut Keys Ordered Separately Change key, master key, construction master key, or control key; BA, BB, BC, BD, BE, BF BG, BH, BJ, BK, BL, BM, BQ, SC, SE section $4 Exit MANET Slidiing Handles and 4540 Change key, master key, or control key; D00 section $4 NOTE: D00 keyway is restricted. Contact Customer Service for DORMA SKC policies. F-2

Housings & Handles Locking Ladder Pull Handles Item Number Description # of Fixings U/M Satin 700 (6L) Non-locking Ladder Pull 926.920 Handle, Non-Lock Ladder 49" 2F Set $495 926.92 Handle, Non-Lock Ladder 60" 2F Set $55 926.922 Handle, Non-Lock Ladder 72" F Set $588 926.92 Handle, Non-Lock Ladder 84" F Set $622 Locking Ladder Pull 926.90 Handle, Locking Ladder 49" 2F Set $,298 926.9 Handle, Locking Ladder 60" 2F Set $,54 926.92 Handle, Locking Ladder 72" F Set $,88 926.9 Handle, Locking Ladder 84" F Set $,425 Standard or Non-Standard Fabricated; lead time up to business days. Exit MANET Slidiing Handles and NOTE: The default cylinder for Locking Ladder Pulls uses the 87 Series housing with Small Format Interchangeable Core (SFIC) less core (00). Other cylinder and keying options are available. Refer to the following pages (F-4 F5) for other keying options with 87 Series cylinders or other cylinders and keying. F-

Housings & Handles Locking Ladder Pull Handles Small Format Interchangeable Cores Ordering Guide Description NOTE: Contact Customer Service to order tailpieces. 76 or 77 Series core, combinated - Keys sold separately Uncombinated core - Temporary construction core - NOTE Keys sold separately Keys sold separately Core Length 77 7-Pin Core 6-Pin Core 76 77 Black Construction Core Blue Construction Core Green Construction Core Example Keys Ordered Separately BA Finish* 500 Satin Chrome 500 XX Not Specified BA Best A BB Best B BC Best C BD Best D BE Best E BF Best F BG Best G BH Best H BJ Best J BK Best K BL Best L BM Best M BQ Best Q D00 BLK BLU GRN Keyway MKD MKD UNC TMP Keying * DORMA SKC (supplied standard with DORMA logo - 7-pin Core only) Order If Required to Match Existing Project Combinated (Master Keyed) Uncombinated Temporary Construction Core Finish 500 is the same as Finish 626 in the DORMA Architectural Price Book. All Finishes 77 BA 500 MKD $4 77 BA 500 UNC $27 77 XX 500 TMP $26 Item Number Description List Price 450 Cut key change key, master key, control key; B keyways $5 4540 Cut key change key, master key, control key; D00 keyway $0 D00 keyway cylinders must be ordered 0-bitted or MKD; keys sold separately. Other restrictions apply. Contact Customer Service for DORMA SKC policies. Exit MANET Slidiing Handles and Service Item Item Number Description List Price 86005 Plastic construction core $4 F-4

Housings & Handles Locking Ladder Pull Handles Conventional (non-ic) Rim Cylinders Ordering Guide When ordered in lieu of 87 00; see page F-2. Cylinder Ring Standard Ring R 80 R Tailpiece Finish* 20 Horizontal 700 Satin 20 Option Keyway Example Keys Keys Ordered Separately for MKD, CMK, and SKC Item List Number Description Price 450 Cut key change key, master key, control key; B keyways $5 4540 Cut key change key, master key, control key; D00 keyway $0 SC 700 KD Conventional 80 SC Schlage C Rim KD Keyed Different Cylinder Type SE Schlage E KA2 Keyed Alike, Sets of 2 D00 DORMA SKC KA4 Keyed Alike, Sets of 4 AA Arrow A NSK Non-Stock CA Corbin 60 Keyed CB Corbin 67 Master MKD Keyed CC Corbin 77 Construction CMK Master Keyed CD Corbin 59A 0BIT 0-Bitted CorbinRusswin L4 CE Russwin 98 RA Keying RB Russwin D GA Sargent LA * Finish 700 is the same as Finish 60 in the DORMA Retrofit Keyways SF Schlage F Architectural Price Book. Available 0-Bitted Only WA Weiser E YA Yale 8 YG Yale GA Keyway All Finishes KD (standard)/ka2/ka4 SC 80R20 SC 700 KD 2 keys ea. $ NSK (KA other than KA2/KA4) SC 80R20 SC 700 NSK KA 2 keys ea. $ Master keyed SC, SE, D00 80R20 SC 700 MKD Construction master keyed SC, SE, D00 80R20 SC 700 CMK Keys sold separately Keys sold separately 0-Bit SC, SE 80R20 SC 700 0BIT 2 keys ea. $ 0-Bit D00 80R20 D00 700 0BIT Keys sold separately 0-Bit Retro 80R20 RB 700 0BIT 2 keys ea. $9 $ $6 $ Exit MANET Slidiing Handles and NOTE D00 keyway cylinders must be ordered 0-bitted or MKD; keys sold separately. Other restrictions apply. Contact Customer Service for DORMA SKC policies. F-5

L 7-7/8" (200 mm) DORMA Glas Housings & Handles TG 95 Pull Handles Straight, Mitered Includes handle(s), fixings for /2" (2 mm) glass, and optional roses Item Number Description # of Fixings U/M Polished 70 Satin 700 TG 95 Diameter " (25 mm) Single Sided 905.0 L= 8-/4" thru 27-/2" 2F Ea. $4 $49 905.02 L= 27-9/6" thru 4-/4" 2F Ea. $467 $566 905.0 L= 4-5/6" thru 59" 2F Ea. $52 $68 905.04 L= 59-/6" thru 74-/4" F Ea. $740 $92 905.05 L= 74-/6" thru 94-7/6" F Ea. $879 $,08 905.06 L= 94-/2" thru 0-/6" F Ea. $949 $,7 Back-to-Back 905.50 L= 8-/4" thru 27-/2" 2F Set $65 $85 905.502 L= 27-9/6" thru 4-/4" 2F Set $762 $959 905.50 L= 4-5/6" thru 59" 2F Set $87 $,04 905.504 L= 59-/6" thru 74-/4" F Set $,09 $,670 905.505 L= 74-/6" thru 94-7/6" F Set $,499 $,90 905.506 L= 94-/2" thru 0-/6" F Set $,68 $2,08 TG 95 Diameter -/4" (2 mm) Single Sided 905.40 L= 7-7/8" thru 27-/2" 2F Ea. $9 $7 905.4 L= 27-9/6" thru 4-/4" 2F Ea. $84 $457 905.42 L= 4-5/6" thru 59" 2F Ea. $449 $542 905.4 L= 59-/6" thru 74-/4" 2F Ea. $5 $626 905.44 L= 74-/6" thru 94-7/6" F Ea. $745 $906 905.45 L= 94-/2" thru 0-/6" F Ea. $826 $,0 Back-to-Back 905.540 L= 7-7/8" thru 27-/2" 2F Set $465 $574 905.54 L= 27-9/6" thru 4-/4" 2F Set $595 $742 905.542 L= 4-5/6" thru 59" 2F Set $725 $9 905.54 L= 59-/6" thru 74-/4" 2F Set $854 $,080 905.544 L= 74-/6" thru 94-7/6" F Set $,2 $,55 905.545 L= 94-/2" thru 0-/6" F Set $,9 $,764 L Ø = " (25 mm) -/4" (2 mm) Exit MANET Slidiing Handles and ø-/4" (ø2 mm) H = 2-5/6" (75 mm) -/8" (85 mm) L 8-/4" (20 mm) 7-7/8" (200 mm) Ø H -/8" (85 mm) When required, rd fixing is centered on L dimension unless otherwise requested. F-6

Housings & Handles TG 987 Pull Handles with Straight Supports Includes handle(s), fixings for /2" (2 mm) glass, and optional roses Item Number Description # of Fixings U/M Polished 70 Satin 700 TG 987 Diameter " (25 mm) Single Sided 905.22 L= -/6" thru 27-/2" 2F Ea. $88 $46 905.2 L= 27-9/6" thru 4-/4" 2F Ea. $444 $56 905.24 L= 4-5/6" thru 59" 2F Ea. $500 $608 905.25 L= 59-/6" thru 74-/4" F Ea. $555 $680 905.26 L= 74-/6" thru 94-7/6" F Ea. $694 $840 905.27 L= 94-/2" thru 0-/6" F Ea. $76 $90 Back-to-Back 905.522 L= -/6" thru 27-/2" 2F Set $604 $754 905.52 L= 27-9/6" thru 4-/4" 2F Set $75 $899 905.524 L= 4-5/6" thru 59" 2F Set $827 $,044 905.525 L= 59-/6" thru 74-/4" F Set $98 $,88 905.526 L= 74-/6" thru 94-7/6" F Set $,29 $,42 905.527 L= 94-/2" thru 0-/6" F Set $,268 $,60 TG 987 Diameter -/4" (2 mm) Single Sided 905.6 L= -/6" thru 27-/2" 2F Ea. $44 $406 905.64 L= 27-9/6" thru 4-/4" 2F Ea. $409 $490 905.65 L= 4-5/6" thru 59" 2F Ea. $474 $575 905.66 L= 59-/6" thru 74-/4" 2F Ea. $59 $659 905.67 L= 74-/6" thru 94-7/6" F Ea. $689 $84 905.68 L= 94-/2" thru 0-/6" F Ea. $770 $99 Back-to-Back 905.56 L= -/6" thru 27-/2" 2F Set $56 $640 905.564 L= 27-9/6" thru 4-/4" 2F Set $646 $809 905.565 L= 4-5/6" thru 59" 2F Set $776 $977 905.566 L= 59-/6" thru 74-/4" 2F Set $905 $,46 905.567 L= 74-/6" thru 94-7/6" F Set $,20 $,409 905.568 L= 94-/2" thru 0-/6" F Set $,282 $,69 Any center distance specifically tailored to your requirements. La = Li.6 b a a b Li La La Li øs øg La Li ø" (ø26 mm) Exit MANET Slidiing Handles and øg " (25 mm) -/4" (2 mm) øs /6" (8 mm) " (26 mm) H 2-5/6" (75 mm) -/8" (85 mm) fixings required 59-/6" (500 mm) 74-/6" (900 mm) When required, rd fixing is centered on L dimension unless otherwise requested. H ø" (ø26 mm) -/8" (85 mm) ø-/4" (ø2 mm) F-7

Housings & Handles TG Pull Handles 980, 990, 99, 995 Includes handle(s), fixings for /2" (2 mm) glass, and optional roses Item Number Description U/M Polished 70 TG 980 Bowed pull handle, -/4" (50 mm) center to center -/6" (0 mm) -/4" (45 mm) 9/6" (5 mm) -/4" (50 mm) -/6" (0 mm) -/6" (9 mm) Satin 700 905.0 Single Sided Ea. $472 $572 905.50 Back-to-Back Set $77 $97 TG 990 Flat pull handle, -/4" (50 mm) center to center /4" (20 mm) 4-9/6" (70 mm) -/4" (50 mm) 905. Single Sided Ea. $750 $9 905.5 Back-to-Back Set $,27 $,694 -/8" (85 mm) -9/6" (40 mm) TG 99 Narrow pull handle, -/4" (50 mm) center to center -9/6" (40 mm) -9/6" (40 mm) -/8" (85 mm) 5-/8" (90 mm) -/4" (50 mm) /4" (20 mm) 905.2 Single Sided Ea. $750 $9 905.52 Back-to-Back Set $,27 $,694 TG 995 Flat, beveled pull handle, -/4" (50 mm) center to center -/4" (50 mm) -/6" (0 mm) -/8" (80 mm) 0 20-/6" (525 mm) -9/6" (40 mm) 905. Single Sided Ea. $67 $84 905.5 Back-to-Back Set $,74 $,495 Exit MANET Slidiing Handles and /4" (20 mm) F-8

Housings & Handles TG Pull Handles 904 and 906 Includes handle(s), fixings for /2" (2 mm) glass, and optional roses TG 904 Curved, pull handle, bent standoff, center to center varies Item Number Description U/M Clear 0 Polished 70 Diameter -/6" (0 mm); -/6" (00 mm) center to center Satin 700 L R 905.40 Single Sided Ea. $56 905.60 Back-to-Back Set $59 Diameter -/4" (2 mm); -/4" (50 mm) center to center H R B l 905.404 Single Sided Ea. $6 905.604 Back-to-Back Set $55 Ø -/6" (0mm) -/4" (2mm) R -/4" (44 mm) -/4" (44 mm) R 5-5/6" (50 mm) 6-7/8" (75 mm) B 7-/6" (95 mm) 8-/6" (220 mm) H -/8" (85 mm) -/8" (85 mm) L -/6" (00 mm) -/4" (50 mm) 905.69 Single Sided Ea. $254 $289 905.569 Back-to-Back Set $5 $405 TG 906 Curved pull handle, straight standoff, -/4" (50 mm) center to center Diameter -/6" (0 mm) H -/4" (50 mm) ØG/ØS -/6" (0mm) -9/6" (40mm) R 6-7/8" (75 mm) 6-7/8" (75 mm) B 7-/6" (95 mm) 8-/6" (205 mm) H -/8" (85 mm) -5/6" (00 mm) M /6" (20 mm) " (25 mm) M øs R B øg 905.405 Single Sided Ea. $57 $656 905.605 Back-to-Back Set $90 $,40 Diameter -/4" (2 mm) 905.4 Single Sided Ea. $606 $746 905.6 Back-to-Back Set $,040 $,2 Exit MANET Slidiing Handles and F-9