ORIGIN OF NOISE AND VIBRATIONS KNOCKED DOWN BY CONTINUUM PUMP LA POMPA CONTINUUM HA ELIMINATO LE ORIGINI DEL RUMORE E DELLE VIBRAZIONI

Continuum pump Achieves better efficiency, lower production cost, better life quality for the industrial world. Ottiene alti livelli di efficienza, ridotti costi di produzione ed una migliore qualità del lavoro. Reducing noise in the workplace has become a necessity for many companies. By now most companies have recognized noise as a cost weighting on the economics of their businesses. Noise pollution remains a serious problem to be solved for both stationary and mobile machinery. Hydraulic pumps, above all those for high pressure, entail unacceptable noise and/or vibration levels in many different applications. Up to now the noise problem has always been approached in the only possible way: with secondary and expensive activities such as using pulsation dampers, hoses, damping rails and rings, encapsulating the hydraulic components or the entire system and so on. SETTIMA decided to start to design a new gear pumps generation capable to reduce as much as possible the acoustic emissions and the consequent vibration level. Some years ago the result was the Continuum pump series, able to reduce down to 52 db(a) the normal operation noise. Today SETTIMA presents the new generation of Continuum pumps, silent as always, but much more efficient and with longer lifetime even at heavy duty, at all pressure and speed ranges. The most important economic benefits of using Continuum pumps are: - very low pump pulsations reduce dramatically also vibrations with no dispersion of energy, - saving money respect to the more expensive traditional pumps such as piston pumps and internal gear pumps, - high volumetric efficiency, also at very low speed, contributes to cost reduction and also enables the pump to be driven by motor at a variable velocity with consequent energy saving, - cost saving by eliminating second noise reduction measures, - keeping the same external dimensions of gear pump, with no necessity to redesign the system in case of replacement. COMPETITIVE ANALYSIS Continuum pump is a valid alternative to silently replace different traditional solutions of noisy high pressure pump. Continuum pump can replace the following types of high pressure pump: - External gear pumps - Internal gear pumps - Fixed displacement vane pumps - Fixed displacement piston pumps Please contact Settima for all information about any possible replacement. ORIGIN OF NOISE AND VIBRATIONS KNOCKED DOWN BY CONTINUUM PUMP LA POMPA CONTINUUM HA ELIMINATO LE ORIGINI DEL RUMORE E DELLE VIBRAZIONI The typical sound emissions of gear pumps have two distinct origins: mechanical noise and hydraulic noise. The mechanical noise is what can be expected from any pair of gears. The hydraulic noise, however, is generated by the perturbations of fluid pressure through the pump. This noise and/or vibration comes from three basic components: cavitation, that can cause serious noise in addition to structural damage to mechanical components the peak pressure that arises from trapping of fluid between the top and the bottom of the tooth, the ripple or the flow pulsation during meshing that causes pressure pulsation. The continuous contact helical rotor Continuum pump has solved these problems with sophisticated and efficient systems. THINK DIFFERENT: THE SILENT AND UNIQUE REVOLUTION OF CONTINUUM PUMP UNA RIVOLUZIONE SILENZIOSA: LA POMPA CONTINUUM As for classic gear pumps, the transport flow is perpendicular to the axes, but the rotors profile, specially developed and internationally patented, does not trap any volume since the helical design of the profile plays the role of completing an overlap, making a gentle transmission of fluid resulting in a dramatic reduction of pulsation. There is just a single point of contact between the profiles 2

during rotation, which eliminates the pockets acting on the axial thrust washer and the noise associated with this problem. The Continuum core and its technological innovation is based on three patented breakthroughs: The rotor profile The screw step The inner force balancing. MANUFACTURING ACCURACY IN ANY DETAILS MASSIMA ACCURATEZZA NEI DETTAGLI SETTIMA produces hydraulic pumps since over thirty years, achieving a high level of competence and accuracy in the manufacture of high-precision pump drives. Together with top production machineries, efficient test environments, 3D drawing capability and special materials for rotors and bushings, SETTIMA constantly achieves products of high quality that is the industry standard. CONTINUUM PUMP ADVANTAGES VANTAGGI DELLA POMPA CONTINUUM Low noise also at high speed (up to 6.5 RPM). Average of 15 db(a) less noisy than standard external gear pumps. Reduced noise level for the machine operator and surroundings. Cost saving by eliminating second noise reduction measures. Easy to replace thanks to compatibility with all external gear pumps. Helps meet legal noise requirements. Continuous variable flow rate (% to 1%). Undirectional pump and/or bi-directional pump/motor. Intermittent operation at high pressure & low speed. Allowed to be driven by servo motors or asynchronous motors. High volumetrical efficiency. Fast reverse RPM allowed: CCW max < 4. Response time < 1 ms due to very small internal mechanical inertia. Noise [dba] 75 7 65 6 55 5 1 125 15 175 2,-./ seed [123] 15bar +,-.-// 15bar Ext Gear 1 15bar Ext Gear 2 3

Applications / Applicazioni INDUSTRIAL MOBILE ENVIRONMENTAL INDUSTRY MARINE Machine tools lubrication systems. Lifting equipment, hydraulic systems for dock-levelers. Hydraulic transmission systems. Machines lubrication. Chemical metering. Hydraulic systems for injection moulding machines, presses, compactors and balers. Systems for lubrication and cooling of gearboxes and bearings. Hydraulic powerpack. equip- Ground-handling ment. Agricultural machinery. Hydraulic systems for parking systems. Steering units. Torque converters & powershift transmissions. Street-sweeping vehicles. Shredder systems. Waste container level lifter. Baler and compacting of waste. Containers. Hooklift containers. Back loading containers. Front loading containers. Liftdumper containers. Hooklift systems. Garbage trucks. Mobile compactors. Stationary compactors. Marine power hydraulics. Rudder actuators (tandem system). Propeller pitch control. Propeller drive (power transmission from engine). Rotary vane steering gears. Minipowerpacks (dock operation, door control). Yacht building industry (lifting systems: fly bridge cranes, tenderlift, elevator, walkways, automatic swimming ladders, side boarding ladders, pitch controls and operations, hydraulic davits). Hydro power. Feeder system for filter circuits, cooling circuits, lubrication applications, pump transfer unit. Technical characteristics / Caratteristiche tecniche SPECIAL HELICAL ROTORS CONTINUUM represents an innovative and revolutionary gear pump. The patented profile of the Continuum rotors permits just a single point of contact between gears: this results, together with a particular screw step and inner force balancing, in the total absence of trapped and compressed oil, and leads to no noise and no pulsation. HIGH PRESSURE CONTINUUM has been designed for high pressure, high speed and heavy duty. TANDEM GROUP CONTINUUM can be also assembled as a double pump, connecting two pumps from different groups: from group 1 to group 4. 4

Technical characteristics Models Modelli Flanges Flange Connections Connessioni Installation position Posizione di installazione Shaft rotation Rotazione Shaft speed Velocità di rotazione Flows Portate 28-33 -38-47 - 55-72 - 92* - 16* Group 1 Group 2 (European, German, BKT, SAE-A) Group 3 (European, SAE-B) Group 4 (SAE-D) Gruppo 1 Gruppo 2 (Europeo, Tedesco, BKT, SAE-A) Gruppo 3 (Europeo, SAE-B) Gruppo 4 (SAE-D) BSPP (GAS) SAE 3/6 PSI FL 4 HOLES M6 SU Ø4 DN2 (mentioned connections depend on model) BSPP (GAS) SAE 3/6 PSI FL 4 HOLES M6 SU Ø4 DN2 (in base al modello) External and/or under oil Esterna e/o immersa Clockwise (please contact Settima for counter clockwise) Destra (contattare Settima per sinistra) From 15 to 6.5 rpm (for usage below 1. rpm or over 1.8 rpm please contact Settima) Da 15 a 6.5 rpm (per utilizzi a giri inferiori a 1. rpm o superiori a 1.8 rpm contattare Settima) From 4 up to 22 cm3 from 6L/min up to 33L/min (at 1.5 rpm) Da 4 fino a 22 cm3 da 6L/min fino a 33L/min (a 1.5 rpm) Operating pressure operativa Max. Continuous: 275 bar Max. Cycle ON/OFF: 28 bar Max. Peak: 3 bar Depending on models Depending on models Depending on models Max. Continuo: 275 bar Max. Ciclo ON/OFF: 28 bar Max. Picco: 3 bar In base al modello In base al modello In base al modello Inlet pressure di aspirazione.8 3 bar (depends on models),8 3 bar (in base al modello) Fluids Fluidi - Mineral oil - Synthetic oil - Olio minerale - Olio sintetico Viscosity* Viscosità* Environmental temperature Temperatura ambiente Oil temperature Temperature olio Possible: from 5 up to 8 cst** Recommended: from 32 up to 15 cst Starting condition: up to 3. cst** From -15 C up to +6 C Da -15 C a +6 C From -15 C up to +8 C Da -15 C a +8 C Consentita: da 5 fino a 8 cst** Raccomandata: da 32 fino a 15 cst Condizioni di avviamento: fino a 3. cst** Contamination level Livello di contaminazione Filtration Filtrazione Seals Guarnizioni Acoustic emissions Emissioni acustiche Flanges material Materiale delle flange Pump body Corpo Screws Viti Up to 8 NAS (18/17/14 ISO446) (for heavy duty operations over 15 bar, over 4 working hours/day, 1 cycle/day oil ISO 46) Fino a 8 NAS (18/17/14 ISO446) (per lavoro ad alto sforzo oltre 15 bar, oltre 4 ore lavorative/giorno, 1 cicli/ giorno olio ISO 46) From 25 to 1 µm (for heavy duty operations over 15 bar, over 4 working hours/day, 1 cycle/day oil ISO 46) Da 25 a 1 µm (per lavoro ad alto sforzo oltre 15 bar, oltre 4 ore lavorative/giorno, 1 cicli/giorno olio ISO 46) NBR, FKM (others on request) NBR, FKM (altri a richiesta) From 52 up to 63 db(a) at 2.95 rpm Da 52 fino a 63 db(a) at 2.95 rpm Cast iron Ghisa Extruded aluminium alloy Alluminio estruso Hardened steel Acciaio temprato * Model GR92 and GR16 will be available soon. I modelli GR92 e GR16 saranno disponibili a breve. ** Please for more information about possible and starting conditions of viscosity contact Settima. Contattare Settima per maggiori informazioni sui livelli di viscosità possibili e quelli delle condizioni di inizio lavoro. 5

Product description / Descrizione prodotto 16 4 6 17 13 1 9 12 8 15 6 11 1 5 2 17 14 7 15 3 N DESCRIPTION/DESCRIZIONE MATERIAL / MATERIALE 1 O-ring seal / O-ring NBR 2 O-ring seal / O-ring NBR 3 O-ring seal / O-ring NBR 4 Driving Continuum rotor / Rotore guida Continuum Hardened steel / Acciaio temprato 5 Motor flange / Flangia motore Cast iron / Ghisa 6 Ring for bush / Anello porta boccola Bronze / Bronzo 7 Driven Continuum rotor / Rotore guidato Continuum Hardened steel / Acciaio temprato 8 Body / Corpo Extruded aluminum alloy / Alluminio estruso 9 Cover flange / Flangia Cast iron / Ghisa 1 Seal / Anello di tenuta NBR 11 Seeger / Seeger Steel / Acciaio 12 Screws / Viti di fissaggio Steel / Acciaio 13 Piston / Pistone Steel / Acciaio 14 Piston / Pistone Steel / Acciaio 15 Centring Keys / Spine di centraggio Steel / Acciaio 17 Bushings / Bronzine Steel with PTFE coating / Acciaio con rivestimento PTFE Standard type and options STANDARD OPTIONS Pump Body Alluminium Cast iron Seal kit NBR FKM 6

Ordering code / Codice ordine Single pump / Pompa singola Type Class Classe Displacement Cilindrata Flange & shaft Flangia & albero Ports Porte Shaft seal Guarnizione albero Rotation Rotazione GR28 2V 4-6-8-1-13 F1AC3-F1PAC2-F1KAG54-F1LAGL54- FSAEAAC-F1KAGL54 G GR33 2V 1-13-15-18 F2AC4-F2BK7AG-FSAEAAC-FSAEAAT9 G-M GR38 2V 16-18-2-22-25-28 F2AC4-F2BK7AG-FSAEAAC- FSAEAAT11-FSAEAAT9 G-M Standard NBR (none) Standard DX (none) GR47 2V 28-32-36-4-45-5 F3AC9-FSAEBAC-FSAEBAT13 O Optional GR55 2V 5-63-75-9 FSAEBAC-FSAEBAT15 O-OE FKM Optional SX* GR72 2V 94-11-125-15-175-2-22 FSAEDAC-FSAEDAT23 ME V * Please Contact Settima for SX counter clockwise optional rotation. Contattare Settima per rotazione SX opzionale. DIRECTION OF ROTATION / SENSO DI ROTAZIONE Continuum pumps are available with right rotation as standard configuration and left rotation as optional configuration. Right hand rotation means that, when standing in front of the pump, with driving shaft towards to the observer, the pump is rotating clockwise (DX). The other way around with left hand rotation, counter clockwise (SX). Le pompe Continuum sono fornite con la configurazione standard di rotazione destra. Opzionale la rotazione sinistra. Con rotazione destra (DX) si intende che, guardando la pompa frontalmente, con l albero conduttore sporgente verso il punto di osservazione, la rotazione sarà in senso orario, con il lato mandata sulla destra e il lato aspirazione sulla sinistra della pompa. Viceversa per quanto riguarda la rotazione sinistra (SX). Continuum pumps, despite the type of configuration, can rotate to the opposite side if the pressure is not higher than 1% of maximum continuous pressure (check the Technical Characteristics table). Le pompe Continuum, qualunque configurazione di rotazione abbiano, possono ruotare in senso inverso a pressioni non superiore al 1% della massima pressione continua (verificare nella tabella delle caratteristiche tecniche). DX: Clockwise rotation / Rotazione destra SX: Counter clockwise rotation / Rotazione sinistra Inlet / Aspirazione Outlet / Mandata Outlet / Mandata Inlet / Aspirazione 7

GR28 - Dimensional drawings / Disegni dimensionali SHAFT AND FLANGE TYPE AND DIMENSIONS / TIPO ALBERO E FLANGE E DIMENSIONI Group 1 pumps / Pompe gruppo 1 Available flanges and shafts / Flange ed alberi disponibili Type Dimensions B Dimensioni B TYPE / TIPO 1-C3 Continuous continua Intermittent intermittente (*) 4 4,2 6, 11, 44,5 275 28 3 55 6 6,4 9,2 16,5 47,25 275 28 3 55 8 8,3 12, 111,5 49,75 246 26 28 55 1 1,2 14,7 116,5 52,25 222 25 27 55 13 12,9 18,6 123,4 55,55 176 23 25 55 Max torque / Coppia max: 1 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 8

Type TYPE / TIPO 1-C3 (with safety valve/con valvola di massima) Dimensions B Dimensioni B Continuous continua Intermittent intermittente (*) 4 4,2 6, 114,1 44,5 275 28 3 55 6 6,4 9,2 119,5 47,25 275 28 3 55 8 8,3 12, 124,5 49,75 246 26 28 55 1 1,2 14,7 129,5 52,25 222 25 27 55 13 12,9 18,6 136,4 55,7 176 23 25 55 Max torque / Coppia max: 1 Nm Type Dimensions B Dimensioni B TYPE / TIPO 1P-C2 Continuous continua Intermittent intermittente (*) 4 4,2 6, 11, 44,5 24 26 28 55 6 6,4 9,2 16,5 47,25 23 24 27 55 8 8,3 12, 111,5 49,75 2 21 22 55 1 1,2 14,7 116,5 52,25 16 17 18 55 13 12,9 18,6 123,4 55,7 14 15 16 55 Max torque / Coppia max: 5 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 9

Type Dimensions B Dimensioni B TYPE / TIPO 1K-G54 Continuous continua Intermittent intermittente (*) 4 4,2 6, 11, 44,5 275 28 3 55 6 6,4 9,2 16,5 47,25 23 24 27 55 8 8,3 12, 111,5 49,75 18 2 21 55 1 1,2 14,7 116,5 52,25 15 16 17 55 13 12,9 18,6 123,4 55,7 12 13 14 55 Max torque / Coppia max: 4 Nm Type Dimensions B Dimensioni B TYPE / TIPO 1K-GL54 Continuous continua Intermittent intermittente (*) 4 4,2 6, 11, 44,5 275 28 3 55 6 6,4 9,2 16,5 47,25 26 275 29 55 8 8,3 12, 111,5 49,75 23 24 25 55 1 1,2 14,7 116,5 52,25 18 19 2 55 13 12,9 18,6 123,4 55,7 15 16 17 55 Max torque / Coppia max: 5 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 1

Type TYPE / TIPO 1K-GL54 (with safety valve / con valvola di massima) Dimensions B Dimensioni B Continuous continua Intermittent intermittente (*) 4 4,2 6, 114, 44,5 275 28 3 55 6 6,4 9,2 119,5 47,25 26 275 29 55 8 8,3 12, 124,5 49,75 23 24 25 55 1 1,2 14,7 129,5 52,25 18 19 2 55 13 12,9 18,6 136,4 55,7 15 16 17 55 Max torque / Coppia max: 5 Nm Type Dimensions B Dimensioni B TYPE / TIPO SAEA-A - AC Continuous continua Intermittent intermittente (*) 4 4,2 6, 17, 5,5 234 238 255 55 6 6,4 9,2 112,5 53,25 234 238 255 55 8 8,3 12, 117,5 55,75 29 221 238 55 1 1,2 14,7 122,5 58,25 189 213 23 55 13 12,9 18,6 129,4 61,7 17 196 213 55 Max torque / Coppia max: 6 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 11

Type TYPE / TIPO SAEA-A - AC (with safety valve/con valvola di massima) Dimensions B Dimensioni B Continuous continua Intermittent intermittente (*) 4 4,2 6, 12, 5,5 234 238 255 55 6 6,4 9,2 125,5 53,25 234 238 255 55 8 8,3 12, 13,5 55,75 29 221 238 55 1 1,2 14,7 135,5 58,25 189 213 23 55 13 12,9 18,6 142,4 61,7 17 196 213 55 Max torque / Coppia max: 6 Nm Type TYPE / TIPO SAE A-A SAE O-RING PORT UNF Dimensions B Dimensioni B Continuous continua Intermittent intermittente (*) 4 4,2 6, 17, 5,5 234 238 255 55 6 6,4 9,2 112,5 53,25 234 238 255 55 8 8,3 12, 117,5 55,75 29 221 238 55 1 1,2 14,7 122,5 58,25 189 213 23 55 13 12,9 18,6 129,4 61,7 17 196 213 55 Max torque / Coppia max: 6 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 12

Type Continuous continua TYPE / TIPO 1L-GL54 Intermittent intermittente (*) 4 4,2 6, 11, 275 28 3 55 6 6,4 9,2 16,5 26 275 29 55 8 8,3 12, 111,5 23 24 25 55 1 1,2 14,7 116,5 18 19 2 55 13 12,9 18,6 123,4 15 16 17 55 Max torque / Coppia max: 5 Nm Type Continuous continua TYPE / TIPO 1L-G54 Intermittent intermittente (*) 4 4,2 6, 11, 275 28 3 55 6 6,4 9,2 16,5 23 24 27 55 8 8,3 12, 111,5 18 2 21 55 1 1,2 14,7 116,5 15 16 17 55 13 12,9 18,6 123,4 12 13 14 55 Max torque / Coppia max: 4 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 13

GR33 - Dimensional drawings / Disegni dimensionali SHAFT AND FLANGE TYPE AND DIMENSIONS / TIPO ALBERO E FLANGE E DIMENSIONI Group 2 pumps / Pompe gruppo 2 Available flanges and shafts / Flange ed alberi disponibili Type Dimensions B Dimensioni B TYPE / TIPO 2-C4 Continuous continua Intermittent intermittente (*) 1 1,1 14,5 122,5 53,75 275 28 3 55 13 12,6 18,1 127,4 56,2 265 27 29 55 15 15,2 21,8 132,4 58,7 241 25 27 55 18 18,2 26,1 138,2 61,6 26 25 27 55 Max torque / Coppia max: 21 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 14

Type Dimensions B Dimensioni B TYPE / TIPO 2BK7-AG Continuous continua Intermittent intermittente (*) 1 1,1 14,5 122,5 53,75 275 28 3 55 13 12,6 18,1 127,4 56,2 265 27 29 55 15 15,2 21,8 132,4 58,7 241 25 27 55 18 18,2 26,1 138,2 61,6 26 25 27 55 Max torque / Coppia max: 11 Nm Type Dimensions B Dimensioni B TYPE / TIPO SAEA-AC Continuous continua Intermittent intermittente (*) 1 1,1 14,5 122,5 53,75 275 28 3 55 13 12,6 18,1 127,4 56,2 265 27 29 55 15 15,2 21,8 132,4 58,7 241 25 27 55 18 18,2 26,1 138,2 61,6 26 25 27 55 Max torque / Coppia max: 14 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 15

Type TYPE / TIPO SAEA-AC SAE O-RING UNF Dimensions B Dimensioni B Continuous continua Intermittent intermittente (*) 1 1,1 14,5 122,5 53,75 275 28 3 55 13 12,6 18,1 127,4 56,2 265 27 29 55 15 15,2 21,8 132,4 58,7 241 25 27 55 18 18,2 26,1 138,2 61,6 26 25 27 55 Max torque / Coppia max: 14 Nm Type Dimensions B Dimensioni B TYPE / TIPO SAEA-T9 Continuous continua Intermittent intermittente (*) 1 1,1 14,5 122,5 53,75 275 28 3 55 13 12,6 18,1 127,4 56,2 265 27 29 55 15 15,2 21,8 132,4 58,7 241 25 27 55 18 18,2 26,1 138,2 61,6 26 25 27 55 Max torque / Coppia max: 19 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 16

Type TYPE / TIPO SAEA-T9 SAE O-RING UNF Dimensions B Dimensioni B Continuous continua Intermittent intermittente (*) 1 1,1 14,5 122,5 53,75 275 28 3 55 13 12,6 18,1 127,4 56,2 265 27 29 55 15 15,2 21,8 132,4 58,7 241 25 27 55 18 18,2 26,1 138,2 61,6 26 25 27 55 Max torque / Coppia max: 19 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF INLET OUTLET PORTS / PORTE DI ASPIRAZIONE E MANDATA Type G / G Type M / M Inlet/Oulet Inlet/Oulet 17

GR38 - Dimensional drawings / Disegni dimensionali SHAFT AND FLANGE TYPE AND DIMENSIONS / TIPO ALBERO E FLANGE E DIMENSIONI Available flanges and shafts / Flange ed alberi disponibili Type Dimensions B Dimensioni B TYPE / TIPO 2-C4 Continuous continua Intermittent intermittente (*) 16 15,9 22,8 126, 55,5 265 28 3 55 18 17,9 25,8 129, 57, 247 26 28 55 2 2, 28,8 132, 58,5 23 25 27 55 22 22,1 31,8 135, 6, 222 24 26 55 25 25,2 36,2 139,5 62,25 2 21 22 55 28 28,3 4,7 144, 64,5 18 19 2 55 Max torque / Coppia max: 21 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 18

Type Dimensions B Dimensioni B TYPE / TIPO 2BK7-AG Continuous continua Intermittent intermittente (*) 16 15,9 22,8 126, 55,5 265 28 3 55 18 17,9 25,8 129, 57, 247 26 28 55 2 2, 28,8 132, 58,5 23 25 26 55 22 22,1 31,8 135, 6, 21 23 24 55 25 25,2 36,2 139,5 62,25 2 21 22 55 28 28,3 4,7 144, 64,5 18 19 2 55 Max torque / Coppia max: 11 Nm Type Dimensions B Dimensioni B TYPE / TIPO SAEA-AC Continuous continua Intermittent intermittente (*) 16 15,9 22,8 126, 55,5 265 28 3 55 18 17,9 25,8 129, 57, 247 26 28 55 2 2, 28,8 132, 58,5 23 25 27 55 22 22,1 31,8 135, 6, 222 24 26 55 25 25,2 36,2 139,5 62,25 2 21 22 55 28 28,3 4,7 144, 64,5 18 19 2 55 Max torque / Coppia max: 14 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 19

Type TYPE / TIPO SAEA-AC SAE O-RING PORT UNF Dimensions B Dimensioni B Continuous continua Intermittent intermittente (*) 16 15,9 22,8 126, 55,5 265 28 3 55 18 17,9 25,8 129, 57, 247 26 28 55 2 2, 28,8 132, 58,5 23 25 27 55 22 22,1 31,8 135, 6, 222 24 26 55 25 25,2 36,2 139,5 62,25 2 21 22 55 28 28,3 4,7 144, 64,5 18 19 2 55 Max torque / Coppia max: 14 Nm Type Dimensions B Dimensioni B TYPE / TIPO SAEA-T9 Continuous continua Intermittent intermittente (*) 16 15,9 22,8 126, 55,5 265 28 3 55 18 17,9 25,8 129, 57, 247 26 28 55 2 2, 28,8 132, 58,5 23 25 27 55 22 22,1 31,8 135, 6, 222 24 26 55 25 25,2 36,2 139,5 62,25 2 21 22 55 28 28,3 4,7 144, 64,5 18 19 2 55 Max torque / Coppia max: 19 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 2

Type Dimensions B Dimensioni B TYPE / TIPO SAEA-T11 Continuous continua Intermittent intermittente (*) 16 15,9 22,8 126, 55,5 265 28 3 55 18 17,9 25,8 129, 57, 247 26 28 55 2 2, 28,8 132, 58,5 23 25 27 55 22 22,1 31,8 135, 6, 222 25 27 55 25 25,2 36,2 139,5 62,25 28 25 27 55 28 28,3 4,7 144, 64,5 197 25 27 55 Max torque / Coppia max: 21 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF INLET OUTLET PORTS / PORTE DI ASPIRAZIONE E MANDATA Type G / G Type M / M Inlet/Oulet Inlet/Oulet 21

GR47 - Dimensional drawings / Disegni dimensionali SHAFT AND FLANGE TYPE AND DIMENSIONS / TIPO ALBERO E FLANGE E DIMENSIONI Group 3 pumps / Pompe gruppo 3 Available flanges and shafts / Flange ed alberi disponibili Type Dimensions B Dimensioni B TYPE / TIPO 3-C9 Continuous continua Intermittent intermittente (*) 28 28, 4,3 151,5 67,5 27 28 3 57 32 32,2 46,3 155,5 69,5 252 27 28 57 36 36,3 52,3 159,5 71,5 239 25 27 57 4 4,5 58,3 163,5 73,5 225 25 27 57 45 45,5 65, 168, 75,75 213 25 27 57 5 5,3 72,4 173, 78,25 22 25 27 57 Max torque / Coppia max: 32 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 22

2 6 11,6 -.5 Type Dimensions B Dimensioni B TYPE / TIPO SAEB-AC / SAEB-T13 Continuous continua Intermittent intermittente (*) 28 28, 4,3 151,5 67,5 27 28 3 57 32 32,2 46,3 155,5 69,5 252 27 28 57 36 36,3 52,3 159,5 71,5 239 25 27 57 4 4,5 58,3 163,5 73,5 225 25 27 57 45 45,5 65, 168, 75,75 213 25 27 57 5 5,3 72,4 173, 78,25 22 25 27 57 Max torque / Coppia max: 45 Nm - Max torque / Coppia max: 6 Nm INLET OUTLET PORTS / PORTE DI ASPIRAZIONE E MANDATA Inlet SAE 3 from 1 ¼ Outlet SAE 3 from ¾ * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 23

GR55 - Dimensional drawings / Disegni dimensionali SHAFT AND FLANGE TYPE AND DIMENSIONS / TIPO ALBERO E FLANGE E DIMENSIONI Available flanges and shafts / Flange ed alberi disponibili 2 6 11,6 -.5 Type Dimensions B Dimensioni B TYPE / TIPO SAEB-AC Continuous continua Intermittent intermittente (*) 5 5,5 72,7 179,5 81,5 275 28 3 57 63 63,5 91,4 188,5 86, 249 26 28 57 75 75, 18,1 196,5 9, 229 25 27 57 9 9,9 13,9 27,5 95,5 178 24 26 57 Max torque / Coppia max: 55 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 24

2 6 11,6 -.5 Type Dimensions B Dimensioni B (**) TYPE / TIPO SAEB-T15 Continuous continua Intermittent intermittente (*) 5 5,5 72,7 179,5 81,5 275 28 3 57 63 63,5 91,4 188,5 86, 249 26 28 57 75 75, 18,1 196,5 9, 229 25 27 57 9 9,9 13,9 27,5 95,5 178 24 26 57 Max torque / Coppia max: 7 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF ** Ask SETTIMA the dimensional drawings for OE suction port INLET OUTLET PORTS / PORTE DI ASPIRAZIONE E MANDATA INLET Type port O OE Size port SAE-3 1 ¼ SAE-3 1 ¼ only for 5cc SAE-3 1 ½ A1 3,2 3,2 35,7 B1 58,7 58,7 69,85 ØD1 33, 33, 38, F1 M1x2 M1x18 M1x18 OUTLET Type port O OE Size port SAE-3 ¾ SAE-3 1 A2 22,2 26,2 B2 47,6 52,4 ØD2 19, 25, F2 M1X18 M1X18 25

GR72 - Dimensional drawings / Disegni dimensionali SHAFT AND FLANGE TYPE AND DIMENSIONS / TIPO ALBERO E FLANGE E DIMENSIONI Group 4 pumps / Pompe gruppo 4 Available flanges and shafts / Flange ed alberi disponibili Type Dimensions B Dimensioni B TYPE / TIPO SAED-AC Continuous continua Intermittent intermittente (*) 94 94,1 136 245, 125,65 24 25 26 57 11 11,4 147 248, 127,5 23 24 25 57 125 125,5 181 258, 132,15 22 22 23 57 15 15,9 218 268,5 137,4 2 21 22 57 175 175, 253 278,5 142,4 18 19 2 57 2 2,4 29 289, 147,65 16 17 18 57 Max torque / Coppia max: 1 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 26

Type Dimensions B Dimensioni B TYPE / TIPO SAED-T23 Continuous continua Intermittent intermittente (*) 94 94,1 136 245, 125,5 24 25 26 57 11 11,4 147 248, 127, 23 24 25 57 125 125,5 181 258, 132, 22 22 23 57 15 15,9 218 268,5 137,25 2 21 22 57 175 175, 253 278,5 142,25 18 19 2 57 2 2,4 29 289, 147,5 16 17 18 57 Max torque / Coppia max: 12 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF INLET OUTLET PORTS / PORTE DI ASPIRAZIONE E MANDATA Type / ME SAE 6 2 ½ Type / ME SAE 3 1 ½ Inlet Oulet 27

Flow performances @ 46 cst 5 GR 28 1 C3 GR 28 1L GL54 GR 28 1L G54 5 45 GR 28 1P C2 45 4 4 35 Flow [L/min] 35 3 25 2 13cc (176bar) 1cc (222bar) 8cc (246bar) Flow [L/min] 3 25 2 15 13cc (14bar) 1cc (18bar) 8cc (22bar) 6cc (24bar) 4cc (24bar) 15 6cc (275bar) 1 1 4cc (275bar) 5 5 5 1 15 2 25 3 35 4 5 1 15 2 25 3 35 4 -./ -1223 [41m] -./ -1223 [41m] 5 GR 28 1K G54 GR 28 1K GL54 5 GR 28 SAEA AC 45 45 4 4 35 35 Flow [L/min] 3 25 2 15 1 13cc (119bar) 1cc (151bar) 8cc (183bar) 6cc (275bar) 4cc (275bar) Flow [L/min] 3 25 2 15 1 13cc (15bar) 1cc (189bar) 8cc (29bar) 6cc (234bar) 4cc (234bar) 5 5 5 1 15 2 25 3 35 4 -./ -1223 [41m] 5 1 15 2 25 3 35 4 S./ S1223 [41m] GR 33 GR 38 7 1 65 6 55 9 8 Flow [L/min] 5 45 4 35 3 25 2 15 18cc (26bar) 15cc (241bar) 13cc (265bar) 1cc (275bar) Flow [L/min] 7 6 5 4 3 2 28cc (197bar) 25cc (28bar) 22cc (222bar) 2cc (23bar) 18cc (247bar) 16cc (265bar) 1 5 5 1 15 2 25 3 35 4 -./ -1223 [41m] 1 5 1 15 2 25 3 35 4 -./ -1223 [41m] GR 47 GR 55 18 16 3 14 25 Flow [L/min] 12 1 8 6 4 2 5cc (22bar) 45cc (213bar) 4cc (225bar) 36cc (239bar) 32cc (252bar) 28cc (27bar) Flow [L/min] 2 15 1 5 9cc (178bar) 75cc (229bar) 63cc (249bar) 5cc (275bar) 5 1 15 2 25 3 35 4 5 1 15 2 25 3 35 4 -./ -1223 [41m] -./ -1223 [41m] 28

GR 72 GR 38 SAEA T9 35 1 3 9 8 Flow [L/min] 25 2 15 1 2cc (22bar) 175cc (213bar) 15cc (225bar) 125cc (239bar) 11cc (252bar) 94cc (27bar) Flow [L/min] 7 6 5 4 3 2cc (23bar) 18cc (247bar) 16cc (265bar) 5 2 1 5 75 1 125 15 175 2 -./ -1223 [41m] 5 1 15 2 25 3 35 4 S./ S1223 [41m] 29

Power-torque performances @ 46 cst GR 28-4cc Power [kw] 2 18 16 14 12 1 8 6 4 2 2 18 16 14 12 1 8 6 4 2 5 1 15 2 25 3 35 4 2 GR 28-6cc 3 3 GR 28-8cc 4 18 16 25 25 35 14 12 2 2 3 25 1 15 15 2 8 6 1 1 15 4 2 5 5 1 5 5 1 15 2 25 3 35 4 5 1 15 2 25 3 35 4 GR 28-1cc GR 28-13cc 3 5 4 6 25 2 45 4 35 3 35 3 25 55 5 45 4 35 15 25 2 3 1 5 2 15 1 5 15 1 5 25 2 15 1 5 5 1 15 2 25 3 35 4 5 1 15 2 25 3 35 4 5 GR 33-1cc 5 5 GR 33-13cc 7 45 4 45 4 45 4 6 35 35 35 5 3 3 3 4 25 2 25 2 25 2 3 15 15 15 2 1 5 1 5 1 5 1 5 1 15 2 25 3 35 4 5 1 15 2 25 3 35 4 3

GR 33-15cc GR 33-18cc 5 7 6 9 45 4 6 5 8 7 35 5 4 6 3 25 2 4 3 3 5 4 15 2 2 3 1 5 1 1 2 1 5 1 15 2 25 3 35 4 5 1 15 2 25 3 35 4 GR 38-16cc GR 38-18cc 5 8 6 9 45 4 35 3 25 2 15 1 5 7 6 5 4 3 2 1 55 5 45 4 35 3 25 2 15 1 5 8 7 6 5 4 3 2 1 5 1 15 2 25 3 35 4 5 1 15 2 25 3 35 4 6 GR 38-2cc 1 7 GR 38-22cc 12 55 45 5 4 9 8 7 6 5 1 8 35 6 4 3 5 6 25 4 3 2 15 1 5 3 2 1 2 1 4 2 5 1 15 2 25 3 35 4 5 1 15 2 25 3 35 4 8 GR 38-25cc 12 GR 38-28cc 9 14 7 6 5 4 3 2 1 1 8 6 4 2 8 7 6 5 4 3 2 1 12 1 8 6 4 2 5 1 15 2 25 3 35 4 5 1 15 2 25 3 35 4 31

GR 47-28cc 9 14 1 GR 47-32cc 16 8 7 6 5 4 3 2 1 12 1 8 6 4 2 9 8 7 6 5 4 3 2 1 14 12 1 8 6 4 2 5 1 15 2 25 3 35 4 5 1 15 2 25 3 35 4 12 GR 47-36cc 18 GR 47-4cc 14 2 11 1 9 8 16 14 12 12 1 18 16 14 7 6 5 1 8 8 6 12 1 8 4 3 2 1 6 4 2 4 2 6 4 2 5 1 15 2 25 3 35 4 5 1 15 2 25 3 35 4 GR 47-45cc 14 22 GR 47-5cc 16 24 12 2 18 14 22 2 1 8 6 4 16 14 12 1 8 6 12 1 8 6 4 18 16 14 12 1 8 6 2 4 2 2 4 2 5 1 15 2 25 3 35 4 5 1 15 2 25 3 35 4 GR 55-5cc 15 25 2 GR 55-63cc 3 125 2 175 15 25 1 15 125 2 75 1 15 5 1 75 1 25 5 5 25 5 5 1 15 2 25 3 35 4 5 1 15 2 25 3 35 4 32

GR 55-75cc GR 55-9cc 25 35 3 45 225 2 175 3 25 275 25 225 2 4 35 3 15 125 1 2 15 175 15 125 25 2 75 5 25 1 5 1 75 5 25 15 1 5 5 1 15 2 25 3 35 4 5 1 15 2 25 3 35 4 GR 72-94cc GR 72-11cc 16 5 18 55 14 12 1 8 6 4 2 45 4 35 3 25 2 15 1 5 5 16 45 14 4 12 35 1 3 8 25 2 6 15 4 1 2 5 5 1 15 2 25 5 1 15 2 25 2 GR 72-125cc 65 3 GR 72-15cc 8 18 16 14 12 1 8 6 4 2 6 55 5 45 4 35 3 25 2 15 1 5 25 2 7 6 5 15 4 3 1 2 5 1 5 1 15 2 25 5 1 15 2 25 3 GR 72-175cc 9 4 GR 72-2cc 11 25 2 8 7 6 35 3 25 1 9 8 7 15 5 4 2 6 5 1 3 2 5 1 5 1 15 2 25 15 4 1 3 2 5 1 5 1 15 2 25 33

Tandem & multiple pumps / Pompe doppie e multiple Continuum pumps are suitable for multiple setups, whereby the drive shaft of the first pump is extended to a second and even a third Continuum pump. Each pump is connected to another by means of coupling. Each pump has its own suction port. Basically the technical specifications of single pumps apply also to multiple setups. The maximum speed is determined by the highest pump speed rate in use. In case of multiple setup configurations, it is recommended to use the largest displacement for the first pump. The front pump may be equipped with different types of flange and shaft. Ordering code / Codice ordine Multiple setups / Pompe multiple Type Class Classe Displacement Cilindrata Flange & shaft Flangia & albero Ports Porte Type 2nd stage 2 stadio Displacement 2nd stage Cilindrata 2 stadio Ports Porte Shaft seal Guarnizione albero Rotation Rotazione GR28 2V 4-6-8-1-13 F1AC3 G GR28 4-6-8-1-13 G GR28 GR33 2V 1-13-15-18 F2AC4 G-M GR33 1-13-15-18 G-M GR38 16-18-2-22-25-28 GR28 4-6-8-1-13 G 16-18-2- GR38 2V F2AC4 G-M GR33 1-13-15-18 22-25-28 G-M GR38 16-18-2-22-25-28 Standard NBR (none) Standard DX (none) GR47 2V 28-32-36-4-45-5 F3AC9 FSAEBAT13 O GR33 1-13-15-18 G-M GR38 16-18-2-22-25-28 GR47 28-32-36-4-45-5 O GR55 2V 5-63-75-9 FSAEBAT15 O GR33 1-13-15-18 GR38 16-18-2-22-25-28 GR47 28-32-36-4-45-5 GR55 5-63-75-9 G-M O Optional FKM V Optional SX* GR72 2V 94-11-125-15-175-2-22 FSAEBAT23 M GR47 28-32-36-4-45-5 O GR55 5-63-75-9 GR72 94-11-125-15-175-2 M * Please Contact Settima for SX counter clockwise optional rotation. Contattare Settima per rotazione SX opzionale. 34

DIRECTION OF ROTATION / SENSO DI ROTAZIONE Continuum pumps are available with right rotation as standard configuration and left rotation as optional configuration. Right hand rotation means that, when standing in front of the pump, with driving shaft towards to the observer, the pump is rotating clockwise (DX). The other way around with left hand rotation, counter clockwise (SX). Le pompe Continuum sono fornite con la configurazione standard di rotazione destra. Opzionale la rotazione sinistra. Con rotazione destra (DX) si intende che, guardando la pompa frontalmente, con l albero conduttore sporgente verso il punto di osservazione, la rotazione sarà in senso orario, con il lato mandata sulla destra e il lato aspirazione sulla sinistra della pompa. Viceversa per quanto riguarda la rotazione sinistra (SX). DX: Clockwise rotation / Rotazione destra SX: Counter clockwise rotation / Rotazione sinistra Inlet / Aspirazione Outlet / Mandata Outlet / Mandata Inlet / Aspirazione 35

GR28 - Group 1 tandem pumps 1 GR28 + GR28 4 6 8 1 13 2 4 6 8 1 13 A 191,5 - - - - B 44,5 - - - - C 9,5 - - - - D 11,9 - - - - E 11,9 - - - - A 197, 22,5 - - - B 47,25 47,25 - - - C 93,25 96, - - - D 11,9 11,9 - - - E 11,9 11,9 - - - A 22, 27,5 212,5 - - B 49,75 49,75 49,75 - - C 95,75 98,5 11, - - D 11,9 11,9 11,9 - - E 11,9 11,9 11,9 - - A 27, 212,5 217,5 222,5 - B 52,25 52,25 52,25 52,25 - C 98,25 11, 13,5 16, - D 11,9 11,9 11,9 11,9 - E 11,9 11,9 11,9 11,9 - A 214, 219,5 224,5 229,5 236,5 B 55,7 55,7 55,7 55,7 55,7 C 11,75 14,5 17, 19,5 113, D 11,9 11,9 11,9 11,9 11,9 E 11,9 11,9 11,9 11,9 11,9 36

Available flanges and shafts for GR28 Flange ed alberi disponibili per GR28: 1C3; 1K-G54; SAEA-AC Type flange 1C3 Flangia tipo 1C3 Type flange 1K-G54 Flangia tipo 1K-G54 Type flange SAEA-AC Flangia tipo SAEA-AC Type shaft 1C3 Albero tipo 1C3 Max torque / Coppia max: 1 Nm Type shaft 1K-G54 Albero tipo 1K-G54 Max torque / Coppia max: 5 Nm Type shaft SAEA-AC Albero tipo SAEA-AC Max torque / Coppia max: 6 Nm 37

GR33; GR38 - Groups 2 tandem pumps GR33 1 GR33 + GR28 1 13 15 18 2 4 6 8 1 13 A 216,5 222, 227, 232, 239, B 53,75 53,75 53,75 53,75 53,75 C 16,25 19, 111,5 114, 117,5 D 13,75 13,75 13,75 13,75 13,75 E 11,9 11,9 11,9 11,9 11,9 A 221,4 226,9 231,9 236,9 243,9 B 56,2 56,2 56,2 56,2 56,2 C 18,7 111,45 113,95 116,45 119,95 D 13,75 13,75 13,75 13,75 13,75 E 11,9 11,9 11,9 11,9 11,9 A 226,4 231,9 236,9 241,9 248,9 B 58,7 58,7 58,7 58,7 58,7 C 111,2 113,95 116,45 118,95 122,45 D 13,75 13,75 13,75 13,75 13,75 E 11,9 11,9 11,9 11,9 11,9 A 232,2 237,7 242,7 247,7 254,7 B 61,6 61,6 61,6 61,6 61,6 C 114,1 116,85 119,35 121,85 125,35 D 13,75 13,75 13,75 13,75 13,75 E 11,9 11,9 11,9 11,9 11,9 1 GR33 + GR33 1 2 1 13 15 18 A 236, - - - B 53,75 - - - C 113,5 - - - D 13,75 - - - E 13,75 - - - 38

13 15 18 A 24,9 245,8 - - B 56,2 56,2 - - C 115,95 118,4 - - D 13,75 13,75 - - E 13,75 13,75 - - A 245,9 25,8 255,8 - B 58,7 58,7 58,7 - C 118,45 12,9 123,4 - D 13,75 13,75 13,75 - E 13,75 13,75 13,75 - A 251,7 256,6 261,6 267,4 B 61,6 61,6 61,6 61,6 C 121,35 123,8 126,3 129,2 D 13,75 13,75 13,75 13,75 E 13,75 13,75 13,75 13,75 Available flanges and shafts for GR33 Flange ed alberi disponibili per GR33: 2C4; SAEA-AC; SAEA-T9; 2BK7-G Type flange 2C4 Flangia tipo 2C4 Type flange SAEA-AC Flangia tipo SAEA-AC Type flange SAEA-T9 Flangia tipo SAEA-T9 Type flange 2BK7-G Flangia tipo 2BK7-G Type shaft 2C4 Albero tipo 2C4 Max torque / Coppia max: 21 Nm Type shaft SAEA-AC Albero tipo SAEA-AC Max torque / Coppia max: 14 Nm Type shaft SAEA-T9 Albero tipo SAEA-T9 Max torque / Coppia max: 19 Nm Type shaft 2BK7-G Albero tipo 2BK7-G Max torque / Coppia max: 11 Nm 39

GR38 1 GR38 + GR28 16 18 2 22 25 28 2 4 6 8 1 13 A 191,5 228,5 233,5 238,5 245,5 B 44,5 55,5 55,5 55,5 55,5 C 9,5 113,75 116,25 118,75 122,25 D 11,9 15,9 15,9 15,9 15,9 E 11,9 11,9 11,9 11,9 11,9 A 226, 231,5 236,5 241,5 248,5 B 57, 57, 57, 57, 57, C 112,5 115,25 117,75 12,25 123,75 D 15,9 15,9 15,9 15,9 15,9 E 11,9 11,9 11,9 11,9 11,9 A 229, 234,5 239,5 244,5 251,5 B 58,5 58,5 58,5 58,5 58,5 C 114, 116,75 119,25 121,75 125,25 D 15,9 15,9 15,9 15,9 15,9 E 11,9 11,9 11,9 11,9 11,9 A 232, 237,5 242,5 247,5 254,5 B 6, 6, 6, 6, 6, C 115,5 118,25 12,75 123,25 126,75 D 15,9 15,9 15,9 15,9 15,9 E 11,9 11,9 11,9 11,9 11,9 A 236,5 242, 247, 252, 259, B 62,25 62,25 62,25 62,25 62,25 C 117,75 12,5 123, 125,5 129, D 15,9 15,9 15,9 15,9 15,9 E 11,9 11,9 11,9 11,9 11,9 A 241, 246,5 251,5 256,5 263,5 B 64,5 64,5 64,5 64,5 64,5 C 12, 122,75 125,25 127,75 131,25 D 15,9 15,9 15,9 15,9 15,9 E 11,9 11,9 11,9 11,9 11,9 1 GR38 + GR33 16 2 1 13 15 18 A 242,5 247,4 252,4 258,2 B 55,5 55,5 55,5 55,5 C 118,25 12,7 123,2 126,1 D 15,9 15,9 15,9 15,9 E 13,75 13,75 13,75 13,75 4

18 2 22 25 28 A 245,5 25,4 255,4 261,2 B 57, 57, 57, 57, C 119,75 122,2 124,7 127,6 D 15,9 15,9 15,9 15,9 E 13,75 13,75 13,75 13,75 A 248,5 253,4 258,4 264,2 B 58,5 58,5 58,5 58,5 C 121,25 123,7 126,2 129,1 D 15,9 15,9 15,9 15,9 E 13,75 13,75 13,75 13,75 A 251,5 256,4 261,4 267,2 B 6, 6, 6, 6, C 122,75 125,2 127,7 13,6 D 15,9 15,9 15,9 15,9 E 13,75 13,75 13,75 13,75 A 256 26,9 265,9 271,7 B 62,25 62,25 62,25 62,25 C 125 127,45 129,95 132,85 D 15,9 15,9 15,9 15,9 E 13,75 13,75 13,75 13,75 A 26,5 265,4 27,4 276,2 B 64,5 64,5 64,5 64,5 C 127,25 129,7 132,2 135,1 D 15,9 15,9 15,9 15,9 E 13,75 13,75 13,75 13,75 1 GR38 + GR38 16 18 2 2 16 18 2 22 25 28 A 246, - - - - - B 55,5 - - - - - C 12, - - - - - D 15,9 - - - - - E 15,9 - - - - - A 249, 252, - - - - B 57, 57, - - - - C 121,5 123, - - - - D 15,9 15,9 - - - - E 15,9 15,9 - - - - A 252, 255, 258, - - - B 58,5 58,5 58,5 - - - C 123, 124,5 126, - - - D 15,9 15,9 15,9 - - - E 15,9 15,9 15,9 - - - 41

22 25 28 A 255, 258, 261, 264, - - B 6, 6, 6, 6, - - C 124,5 126, 127,5 129, - - D 15,9 15,9 15,9 15,9 - - E 15,9 15,9 15,9 15,9 - - A 259,5 262,5 265,5 268,5 273, - B 62,25 62,25 62,25 62,25 62,25 - C 126,75 128,25 129,75 131,25 133,5 - D 15,9 15,9 15,9 15,9 15,9 - E 15,9 15,9 15,9 15,9 15,9 - A 264, 267, 27, 273, 277,5 282, B 64,5 64,5 64,5 64,5 64,5 64,5 C 129, 13,5 132, 133,5 135,75 138, D 15,9 15,9 15,9 15,9 15,9 15,9 E 15,9 15,9 15,9 15,9 15,9 15,9 Available flanges and shafts for GR38 Flange ed alberi disponibili per GR38: 2-BK7 G; SAEA-T11; SAEA-AC; 2C4 Type flange 2BK7-G Flangia tipo 2BK7-G Type flange SAEA-AT11 Flangia tipo SAEA-AT11 Type flange SAEA-AC Flangia tipo SAEA-AC Type flange 2C4 Flangia tipo 2C4 Type shaft 2BK7-G Albero tipo 2BK7-G Max torque / Coppia max: 11 Nm Type shaft SAEA-AT11 Albero tipo SAEA-AT11 Max torque / Coppia max: 21 Nm Type shaft SAEA-AC Albero tipo SAEA-AC Max torque / Coppia max: 14 Nm Type shaft 2C4 Albero tipo 2C4 Max torque / Coppia max: 21 Nm 42

GR47 - Group 3 tandem pumps 1 GR47 + GR28 28 32 36 4 45 5 2 4 6 8 1 13 A 292, 297,5 32,5 37,5 314,4 B 67,5 67,5 67,5 67,5 67,5 C 168, 17,75 173,25 175,75 179,25 D 19,5 19,5 19,5 19,5 19,5 E 11,9 11,9 11,9 11,9 11,9 A 296, 31,5 36,5 311,5 318,4 B 69,5 69,5 69,5 69,5 69,5 C 17, 172,75 175,25 177,75 181,25 D 19,5 19,5 19,5 19,5 19,5 E 11,9 11,9 11,9 11,9 11,9 A 3, 35,5 31,5 315,5 322,4 B 71,5 71,5 71,5 71,5 71,5 C 136, 138,75 141,25 143,75 147,2 D 19,5 19,5 19,5 19,5 19,5 E 11,9 11,9 11,9 11,9 11,9 A 34, 39,5 314,5 319,5 326,4 B 73,5 73,5 73,5 73,5 73,5 C 174, 176,75 179,25 181,75 185,25 D 19,5 19,5 19,5 19,5 19,5 E 11,9 11,9 11,9 11,9 11,9 A 38,5 314, 319, 324, 33,9 B 75,75 75,75 75,75 75,75 75,75 C 14,25 143, 145,5 148, 151,45 D 19,5 19,5 19,5 19,5 19,5 E 11,9 11,9 11,9 11,9 11,9 A 313,5 319, 324, 329, 335,9 B 78,25 78,25 78,25 78,25 78,25 C 178,75 181,5 184, 186,5 19, D 19,5 19,5 19,5 19,5 19,5 E 11,9 11,9 11,9 11,9 11,9 43

1 GR47 + GR33 28 32 36 4 45 5 2 1 13 15 18 A 322, 326,9 331,9 337,7 B 67,5 67,5 67,5 67,5 C 185,25 188,2 19,7 193,6 D 19,5 19,5 19,5 19,5 E 13,75 13,75 13,75 13,75 A 326, 33,9 335,9 341,7 B 69,5 69,5 69,5 69,5 C 187,25 19,2 192,7 195,6 D 19,5 19,5 19,5 19,5 E 13,75 13,75 13,75 13,75 A 33, 334,9 339,9 345,7 B 71,5 71,5 71,5 71,5 C 189,75 192,2 194,7 197,6 D 19,5 19,5 19,5 19,5 E 13,75 13,75 13,75 13,75 A 334, 338,9 343,9 349,7 B 73,5 73,5 73,5 73,5 C 191,75 194,2 196,7 199,6 D 19,5 19,5 19,5 19,5 E 13,75 13,75 13,75 13,75 A 338,5 343,4 348,4 354,2 B 75,75 75,75 75,75 75,75 C 194, 196,45 198,95 21,85 D 19,5 19,5 19,5 19,5 E 13,75 13,75 13,75 13,75 A 343,5 348,4 353,4 359,2 B 78,25 78,25 78,25 78,25 C 196,5 198,95 21,45 24,35 D 19,5 19,5 19,5 19,5 E 13,75 13,75 13,75 13,75 1 GR47 + GR38 28 2 16 18 2 22 25 28 A 325,5 328,5 331,5 334,5 339, 343,5 B 67,5 67,5 67,5 67,5 67,5 67,5 C 187,5 189, 19,5 192, 194,25 196,5 D 19,5 19,5 19,5 19,5 19,5 19,5 E 15,9 15,9 15,9 15,9 15,9 15,9 44

32 36 4 45 5 A 329,5 332,5 335,5 338,5 343, 347,5 B 69,5 69,5 69,5 69,5 69,5 69,5 C 189,5 191, 192,5 194, 196,25 154, D 19,5 19,5 19,5 19,5 19,5 19,5 E 15,9 15,9 15,9 15,9 15,9 15,9 A 333,5 336,5 339,5 342,5 347, 351,5 B 71,5 71,5 71,5 71,5 71,5 71,5 C 191,5 193, 194,5 196, 198,25 2,5 D 19,5 19,5 19,5 19,5 19,5 19,5 E 15,9 15,9 15,9 15,9 15,9 15,9 A 337,5 34,5 343,5 346,5 351, 355,5 B 73,5 73,5 73,5 73,5 73,5 73,5 C 193,5 195, 196,5 198, 2,25 22,5 D 19,5 19,5 19,5 19,5 19,5 19,5 E 15,9 15,9 15,9 15,9 15,9 15,9 A 342, 345, 348, 351, 355,5 36, B 75,75 75,75 75,75 75,75 75,75 75,75 C 195,75 197,25 198,75 2,25 22,5 24,75 D 19,5 19,5 19,5 19,5 19,5 19,5 E 15,9 15,9 15,9 15,9 15,9 15,9 A 347, 35, 353, 356, 36,5 365, B 78,25 78,25 78,25 78,25 78,25 78,25 C 198,25 199,75 21,25 22,75 25, 27,25 D 19,5 19,5 19,5 19,5 19,5 19,5 E 15,9 15,9 15,9 15,9 15,9 15,9 1 GR47 + GR47 28 32 36 2 28 32 36 4 45 5 A 351, - - - - - B 67,5 - - - - - C 21, - - - - - D 19,5 - - - - - E 19,5 - - - - - A 356,5 36,5 - -- - - B 69,5 69,5 - - - - C 23, 25, - - - - D 19,5 19,5 - - - - E 19,5 19,5 - - - - A 36,5 364,5 368,5 - - - B 71,5 71,5 71,5 - - - C 25, 27, 29, - - - D 19,5 19,5 19,5 - - - E 19,5 19,5 19,5 - - - 45

4 45 5 A 364,5 368,5 372,5 376,5 - - B 73,5 73,5 73,5 73,5 - - C 27, 29, 211, 213, - - D 19,5 19,5 19,5 19,5 - - E 19,5 19,5 19,5 19,5 - - A 369, 373, 377, 381, 385,5 - B 75,75 75,75 75,75 75,75 75,75 - C 29,25 211,25 213,25 215,25 217,5 - D 19,5 19,5 19,5 19,5 19,5 - E 19,5 19,5 19,5 19,5 19,5 - A 374, 378, 382, 386, 39,5 395,5 B 78,25 78,25 78,25 78,25 78,25 78,25 C 211,75 213,75 215,75 217,75 22, 222,5 D 19,5 19,5 19,5 19,5 19,5 19,5 E 19,5 19,5 19,5 19,5 19,5 19,5 Available flanges and shafts for GR47 Flange ed alberi disponibili per GR47: 3-C9; SAEB-AC; SAEB-T13 Type flange 3-C9 Flangia tipo 3-C9 Type flange SAEB-AC Flangia tipo SAEB-AC Type flange SAEB-T13 Flangia tipo SAEB-T13 Type shaft 3-C9 Albero tipo 3-C9 Max torque / Coppia max: 32 Nm Type shaft SAEB-AC Albero tipo SAEB-AC Max torque / Coppia max: 45 Nm Type shaft SAEB-T13 Albero tipo SAEB-T13 Max torque / Coppia max: 6 Nm 46

GR55 - Group 4 tandem pumps 1 GR55 + GR28 5 63 75 9 2 4 6 8 1 13 A 323, 328,5 333,5 338,5 345,4 B 81,5 81,5 81,5 81,5 81,5 C 185, 187,75 19,25 192,75 196,25 D 23, 23, 23, 23, 23, E 11,9 11,9 11,9 11,9 11,9 A 332, 337,5 342,5 347,5 354,4 B 86, 86, 86, 86, 86, C 246, 251,5 256,5 261,5 268,5 D 23, 23, 23, 23, 23, E 11,9 11,9 11,9 11,9 11,9 A 34, 345,5 35,5 355,5 362,4 B 9, 9, 9, 9, 9, C 193,5 196,25 198,75 21,25 24,75 D 23, 23, 23, 23, 23, E 11,9 11,9 11,9 11,9 11,9 A 351, 356,5 361,5 366,5 373,4 B 95,5 95,5 95,5 95,5 95,5 C 199 21,75 24,25 26,75 21,25 D 23, 23, 23, 23, 23, E 11,9 11,9 11,9 11,9 11,9 1 GR55 + GR33 5 2 1 13 15 18 A 351,5 356,4 361,4 367,2 B 81,5 81,5 81,5 81,5 C 21,25 23,7 26,2 29,1 D 23, 23, 23, 23, E 13,75 13,75 13,75 13,75 47

63 75 9 A 36,5 365,4 37,4 376,2 B 86, 86, 86, 86, C 274,5 279,4 284,4 29,2 D 23, 23, 23, 23, E 13,75 13,75 13,75 13,75 A 368,5 373,4 378,4 384,2 B 9, 9, 9, 9, C 29,75 212,2 214,7 217,6 D 23, 23, 23, 23, E 13,75 13,75 13,75 13,75 A 379,5 384,4 389,4 395,2 B 95,5 95,5 95,5 95,5 C 215,25 217,7 22, 223,1 D 23, 23, 23, 23, E 13,75 13,75 13,75 13,75 1 GR55 + GR33 5 63 75 9 2 1 13 15 18 A 351,5 356,4 361,4 367,2 B 81,5 81,5 81,5 81,5 C 21,25 23,7 26,2 29,1 D 23, 23, 23, 23, E 13,75 13,75 13,75 13,75 A 36,5 365,4 37,4 376,2 B 86, 86, 86, 86, C 274,5 279,4 284,4 29,2 D 23, 23, 23, 23, E 13,75 13,75 13,75 13,75 A 368,5 373,4 378,4 384,2 B 9, 9, 9, 9, C 29,75 212,2 214,7 217,6 D 23, 23, 23, 23, E 13,75 13,75 13,75 13,75 A 379,5 384,4 389,4 395,2 B 95,5 95,5 95,5 95,5 C 215,25 217,7 22,2 223,1 D 23, 23, 23, 23, E 13,75 13,75 13,75 13,75 1 GR55 + GR38 5 2 16 18 2 22 25 28 A 355, 358, 361, 364, 368,5 373, B 81,5 81,5 81,5 81,5 81,5 81,5 C 23, 24,5 26, 27,5 29,75 212, D 23, 23, 23, 23, 23, 23, E 15,9 15,9 15,9 15,9 15,9 15,9 48

63 75 9 A 364, 367, 37, 373, 377,5 382, B 86, 86, 86, 86, 86, 86, C 278, 281, 284, 287, 291,5 296, D 23, 23, 23, 23, 23, 23, E 15,9 15,9 15,9 15,9 15,9 15,9 A 372, 375, 378, 381, 385,5 39, B 9, 9, 9, 9, 9, 9, C 211,5 213, 214,5 216, 218,25 22,5 D 23, 23, 23, 23, 23, 23, E 15,9 15,9 15,9 15,9 15,9 15,9 A 383, 386, 389, 392, 396,5 41, B 95,5 95,5 95,5 95,5 95,5 95,5 C 217, 218,5 22, 221,5 223,75 226, D 23, 23, 23, 23, 23, 23, E 15,9 15,9 15,9 15,9 15,9 15,9 1 GR55 + GR47 5 63 75 9 2 28 32 36 4 45 5 A 387, 391, 395, 4,5 43,5 48,5 B 81,5 81,5 81,5 81,5 81,5 81,5 C 223, 225, 227, 229, 231,25 233,75 D 23, 23, 23, 23, 23, 23, E 19,5 19,5 19,5 19,5 19,5 19,5 A 396, 4, 44, 48, 412,5 417,5 B 86, 86, 86, 86, 86, 86, C 31, 314, 318, 322, 326,5 331,5 D 23, 23, 23, 23, 23, 23, E 19,5 19,5 19,5 19,5 19,5 19,5 A 44, 48, 412, 416, 42,5 425,5 B 9, 9, 9, 9, 9, 9, C 231,5 233,5 235,5 237,5 239,75 242,25 D 23, 23, 23, 23, 23, 23, E 19,5 19,5 19,5 19,5 19,5 19,5 A 415, 418, 423, 427, 431,5 436,5 B 95,5 95,5 95,5 95,5 95,5 95,5 C 237, 239, 241, 243, 245,25 247,75 D 23, 23, 23, 23, 23, 23, E 19,5 19,5 19,5 19,5 19,5 19,5 1 GR55 + GR55 5 2 5 63 75 9 A 415, - - - B 81,5 - - - C 237, - - - D 23, - - - E 19,5 - - - 49

A 424, 433, - - B 86, 86, - - 63 75 9 C 338, 347, - - D 23, 23, - - E 19,5 19,5 - - A 432, 441, 449, - B 9, 9, 9, - C 245,5 25, 254, - D 23, 23, 23, - E 19,5 19,5 19,5 - A 443, 452, 46, 471, B 95,5 95,5 95,5 95,5 C 251, 255,5 259,5 265, D 23, 23, 23, 23, E 19,5 19,5 19,5 19,5 Available flanges and shafts for GR55 Flange ed alberi disponibili per GR55: SAEB-AC; SAEB-T15 Type flange SAEB-AC Flangia tipo SAEB-AC Type flange SAEB-T15 Flangia tipo SAEB-T15 Type shaft SAEB-AC Albero tipo SAEB-AC Max torque / Coppia max: 55 Nm Type shaft SAEB-T15 Albero tipo SAEB-T15 Max torque / Coppia max: 7 Nm 5

GR72 - Group 5 tandem pumps 1 GR72 + GR47 94 11 125 15 175 2 2 28 32 36 4 45 5 A 44, 444, 448, 452, 456,5 461,5 B 125,5 125,5 125,5 125,5 125,5 125,5 C 232, 234, 236, 238, 24,25 242,75 D 29,75 29,75 29,75 29,75 29,75 29,75 E 19,5 19,5 19,5 19,5 19,5 19,5 A 443, 447, 451, 455, 459,5 464,5 B 127, 127, 127, 127, 127, 127, C 316, 32, 324, 328, 332,5 337,5 D 29,75 29,75 29,75 29,75 29,75 29,75 E 19,5 19,5 19,5 19,5 19,5 19,5 A 453, 457, 461, 465, 469,5 474,5 B 132, 132, 132, 132, 132, 132, C 238,5 24,5 242,5 244,5 246,75 249,25 D 29,75 29,75 29,75 29,75 29,75 29,75 E 19,5 19,5 19,5 19,5 19,5 19,5 A 463,5 467,5 471,5 475,5 48, 485, B 137,25 137,25 137,25 137,25 137,25 137,25 C 243,75 245,75 247,75 249,75 252, 254,5 D 29,75 29,75 29,75 29,75 29,75 29,75 E 19,5 19,5 19,5 19,5 19,5 19,5 A 473,5 477,5 481,5 485,5 49, 495, B 142,25 142,25 142,25 142,25 142,25 142,25 C 248,75 245,75 247,75 249,75 252, 254,5 D 29,75 29,75 29,75 29,75 29,75 29,75 E 19,5 19,5 19,5 19,5 19,5 19,5 A 484, 488, 492, 496, 5,5 55,5 B 147,5 147,5 147,5 147,5 147,5 147,5 C 254, 256, 258, 26, 262,25 264,75 D 29,75 29,75 29,75 29,75 29,75 29,75 E 19,5 19,5 19,5 19,5 19,5 19,5 51

1 GR72 + GR55 94 11 125 15 175 2 2 5 63 75 9 A 468, 477, 485, 496, B 125,5 125,5 125,5 125,5 C 246, 25,5 254,5 26, D 29,75 29,75 29,75 29,75 E 19,5 19,5 19,5 19,5 A 471, 48, 488, 499, B 127, 127, 127, 127, C 344, 353, 361, 372, D 29,75 29,75 29,75 29,75 E 19,5 19,5 19,5 19,5 A 481, 49, 498, 59, B 132, 132, 132, 132, C 252,5 257, 261, 266,5 D 29,75 29,75 29,75 29,75 E 19,5 19,5 19,5 19,5 A 491,5 5,5 58,5 519,5 B 137,25 137,25 137,25 137,25 C 257,75 262,25 266,25 271,75 D 29,75 29,75 29,75 29,75 E 19,5 19,5 19,5 19,5 A 51,5 51,5 518,5 529,5 B 142,25 142,25 142,25 142,25 C 262,75 267,25 271,25 276,75 D 29,75 29,75 29,75 29,75 E 19,5 19,5 19,5 19,5 A 512, 521, 529, 54, B 147,5 147,5 147,5 147,5 C 268, 272,5 276,5 282, D 29,75 29,75 29,75 29,75 E 19,5 19,5 19,5 19,5 1 GR72 + GR72 94 1 2 94 1 125 15 175 2 A 556,5 - - - - - B 125,5 - - - - - C 311,5 - - - - - D 29,75 - - - - - E 29,75 - - - - - A 559,5 562,5 - - - - B 127, 127, - - - - C 432,5 435,5 - - - - D 29,75 29,75 - - - - E 29,75 29,75 - - - - 52

125 15 175 2 A 569,5 572,5 582,5 - - - B 132, 132, 132, - - - C 318, 319,5 324,5 - - - D 29,75 29,75 29,75 - - - E 29,75 29,75 29,75 - - - A 58, 583, 593, 63,5 - - B 137,25 137,25 137,25 137,25 - - C 323,25 324,75 329,75 335, - - D 29,75 29,75 29,75 29,75 - - E 29,75 29,75 29,75 29,75 - - A 59, 593, 63, 613,5 623,5 - B 142,25 142,25 142,25 142,25 142,25 - C 328,25 329,75 334,75 34, 345, - D 29,75 29,75 29,75 29,75 29,75 - E 29,75 29,75 29,75 29,75 29,75 - A 6,5 63,5 613,5 624, 634, 644,5 B 147,5 147,5 147,5 147,5 147,5 147,5 C 333,5 335, 34, 345,25 35,25 355,5 D 29,75 29,75 29,75 29,75 29,75 29,75 E 29,75 29,75 29,75 29,75 29,75 29,75 Available flanges and shafts for GR72 Flange ed alberi disponibili per GR72: SAED-23T Type flange SAED-23T Flangia tipo SAED-23T Type flange SAED-23T Flangia tipo SAED-23T Max torque / Coppia max: 12 Nm 53

GR18 - Continuum pump Continuum pump is a very flexible pump capable to meet the most different and demanding request of customization. Below an example of Continuum pump designed and manufactured according to very special request for oil lubrication in the hydropower and power generation applications. 24 24 A 587 A 6 283 356,75 13 13 618 A 57 32 O 22 224,3 172,8 174,3 144,8 14 B SECTION A-A POMP PUMP AA A BB O 65 -.1 -.2 18 GR18-273cc 424,4 mm 321,4 mm GR18-41cc 516,4 mm 413,4 mm 69 GR18-44cc 534,8 mm 431,8 mm 54

Technical characteristics Models Modelli Displacements Cilindrate Shaft speed Velocità di rotazione Flows Portate Operating pressure operativa Fluids Fluidi GR18 273cc - 41cc - 44cc Up to 1.5 RPM Fino a 1.5 RPM Up to 6. L/min Fino a 6. L/min Up to 5 bar Fino a 5 bar - Mineral oil - Synthetic oil - Olio minerale - Olio sintetico 55