Marking technology LineLazer - Series for sharp-edged AIRLESS spray applications LineLazer 3400 / 3900 / 5900 / 130 HS / 200 HS LineDriver and LineDriver - Air LineLazer 200 HS Compressor LineLazer HS200 2K AUTO-LAYOUT Satellit FieldLazer www.marktec-gruen.com
Marking technology LineLazer are very popular since many years as powerful and practice oriented marking devices with well-proven AIRLESS technique. A high-pressure piston pump compresses the marking paint and extrudes it through a special AIRLESS nozzle. Thereby a sharp-edged spray jet with very little overspray is produced, resulting in a line with the same sharp edges nearly looking like adhered foils. All material contacted parts are made of stainless steel so also water-based marking paints can be processed. Further advantages are e.g. a minimum of overspray, the low cleaning effort and the easy operation. The special model LineLazer 200 HS Compressor allows the application of reflecting beads via compressed air - bead gun. The LineLazer HS200 2K for processing 2-component cold spray plastic with 1:1 mixing ratio is a flexible alternative to big machines. The AUTO LAYOUT System is an ingenious feature to ease the measuring and pre-marking work on parking areas and at centre markings. LineDriver self-propelled drive unit with hydrostatic drive and various capabilities. Foot pedals for infinitely variable drive forward and backwards. The LineDriver upgrades the LineLazer to a powerful marking unit even for marking jobs on the road. The model LineDriver Air, equipped with big engine, compressor and strong generator allows to work with skip-line control and bead gun. Satellit The ingenious tool for the everyday problem areas. Undercarriage with holder for the LineLazer-spray gun. The small and compact Satellit allows effortless marking at narrow places, like e.g. between parking cars, pillars in car parks, left edges etc. FieldLazer the low cost marking unit for all sports areas on lawn. For the processing of special water-based paint for lawn marking all materialcontacted parts are made of special steel. Easy to transport, powerful for efficient work also on big areas the musthave for every stadium and every parks and gardens department.
Marking technology LineLazer 3400 LineLazer 3900 + 5900 LineLazer 130 HS (not pictured) + 200 HS The LineLazer model range from GRACO convinces through high ease of use, robust technique and exceptional line quality. Five marking devices with various sizes and different performance data for every application are available. The LineLazer devices are hard to beat with their great performance on parking places and indoor marking but also as supplemental device for road marking (e.g. for block markings and pictograms). Useful supplemental devices like LineDriver, Auto-Layout and Satellit or the LineLazer HS 200-2K for 2 component cold spray plastic or the LineLazer with compressor complete our range. LineLazer 3400 LineLazer 3900 LineLazer 5900 LineLazer 200HS Art.-No. 1 gun Art.-No. 2 guns Art.-No. Auto-Layout 1 gun Art.-No. Auto-Layout 2 guns 80084100 80085103 80085104 80085105 80085106 80086103 80086104 80086105 80086106 80086203 80086204 80086205 80086206 Tip size max. 1 gun 2 guns 0,027 ------ 0,035 0,025 0,043 0,029 0,045 0,033 Flow rate max. 2.80 L / min. 4.70 L / min. 6.00 L / min. 7.50 L / min. Drive airless material pump mechanical mechanical mechanical hydraulic Spray pressure max. 230 bar 230 bar 230 bar 230 bar Flow rate difference 66 % > LL 3400 28 % > LL 3900 25 % > LL 5900 HONDA gasoline 4.0 HP (3 KW) 4.0 HP (3 KW) 5.5 HP (4 KW) 5.5 HP (4 KW) 4-stroke engine Fuel tank 2.5 Liter 2.5 Liter 3.6 Liter 3.6 Liter Weight 65 kg 96 kg 105 kg 125 kg Width (chassis) 81 cm 81 cm 81 cm 81 cm Height 102 cm 102 cm 102 cm 102 cm Length (without aiming device) 155 cm 165 cm 165 cm 165 cm The LineLazer 130 HS is equipped with hydraulic material pump drive, gasoline engine 4.0 HP (3 kw), pump flow rate max. 4.9 l/min, but without electronic. Please ask for a single brochure.
Marking technology LineDriver and LineDriver Air Hydrostatic driven, comfortable move forward and backwards via foot pedal, simply to couple like a passenger car trailer this drive unit upgrades the LineLazer to a powerful sit-on marking machine. The compressor upgrade on the LineDriver Air allows the use of a bead gun and because of the powerful alternator e.g. a skip-line control can be installed. LineDriver LineDriver HD LineDriver Air with upgrade kit compressor Article-Number HONDA gasoline 4 stroke engine Fuel tank 80087300 4.1 KW 80087301 4.83 KW 80087320 9.5 KW 3.6 Liter 3.6 Liter 6.1 Liter Compressor output not applicable not applicable 340 Liter/min. Weight ca. 120 kg ca. 125 kg ca. 175 kg Width ca. 66 cm ca. 66 cm ca. 66 cm Height ca. 104 cm ca. 104 cm ca. 104 cm Length ca. 147 cm ca. 147 cm ca. 165 cm Not only LineLazer models can be moved with the LineDriver, also other hand-guided devices like road lane dryer, demarcate milling machines or crack milling machines resp. joint cutters are ideal to combine with the LineDriver. LineDriver with LineLazer 200 HS LineDriver with road lane dryer GST LineDriver with demarcate milling machine
Marking technology LineLazer 200 HS Compressor Good retro reflection values are essential for line markings on public places. Therefore the LineLazer 200 HS Compressor is equipped with a compressor which allows to use a pneumatically controlled bead gun. Besides that is the machine a normal LineLazer with all proven features and advantages! LineLazer HS200 2K Instead of the open system with spray resin and coated beads which was so far used for the manual processing of 2-component cold spray plastic the LineLazer HS200 2K now offers various practical applications. The two material components are sprayed wet in wet with open mixing system 1:1. The application ranges from car parks (underground parking) via block markings up to repair jobs after renewal of the road surface. Where previously complex technique had to be used this lightweigt and flexible device is now quickly on the spot. The spray gun with external mixing can also be used as hand spray gun for pictograms. Flushing in between is not necessary as the two components are mixed together outside the system. LineLazer 200 HS Compressor / upgrade kit LineLazer HS 200 2K Article-Number 80086207 / 80087600 80140000 HONDA gasoline 4.6 KW 4.0 KW 4 stroke engine Fuel tank 5.3 Liter 3.6 Liter Compressor output 340 Liter/min. not applicable Weight ca. 150 kg ca. 180 kg Width ca. 70 cm ca. 70 cm Height ca. 102 cm ca. 102 cm Length ca. 205 cm ca. 165 cm
Marking technology AUTO- LAYOUT the ingenious pre-marking system. Controlled by the on-board computer of the LineLazer is this module really helpful to measure and pre-mark car-parks and centre lines. The AUTO LAYOUT -System must be ordered with the LineLazer upgrading is not possible! The computer measures and gives a signal to the AUTO-LAYOUT-System which operates the pre-marking spray can (accessories) setting marker points with a precision of 7 mm. Joining the marker points with the spray jet is the final step. pre-marking spray can, # X0115T336 Satellit narrow places, parking cars, marking between pillars, etc. with the Satellit such situations are no longer a problem. Fed by the marking machine LineLazer the spray gun is simply clamped to the Satellit. The handy device allows precise marking at narrow places. Article-Number Weight Width (chassis) Height (with guide pin) Length Satellit 80090000 ca. 22 kg ca. 22 cm ca. 86 cm ca. 90 cm
Marking technology FieldLazer the marking unit for sports areas on lawn. Execute marking jobs on sports areas with lawn or artificial turf in high quality and short time. Apply sharp-edged lines with proven airless technique using standard water-based special marking paint for sports areas. FieldLazer - the must-have for every stadium and every parks and gardens department. FieldLazer Article-Number X01248777 Flow rate max. 1.9 L / min. Spray pressure max. 60 bar HONDA gasoline 1.1 KW 4 stroke engine Fuel tank 0.7 Liter Weight ca. 36 kg Width (chassis) ca. 60 cm Height / transport height ca. 105 / 65 cm Length / transport length ca. 150 / 125 cm Accessories airless spray tips material filters wide line spray unit coupling for LineDriver 60-Liter-paint hopper
Tip diameter (borehole mm) Filter Size Mesh Table of spray tips Marking technology e.g. LLT319 = tip name Line width = Art.-Number * recommended filter size 5-10 cm 10-15 cm 15-25 cm 25-30 cm Liter / min at 130 bar with standard high solid airless paint 0,33 LL5 213 100* X01LL5213 0,69 0,38 100* LL5 215 LL5 315 X01LL5215 X01LL5315 0,91 0,43 100* LL5 217 LL5 317 LL5 417 X01LL5217 X01LL5317 X01LL5417 1,17 0,48 LL5 219 LL5 319 LL5 419 60 X01LL5219 X01LL5319 X01LL5419 1,37 0,53 LL5 321 LL5 421 LL5 621 60 X01LL5321 X01LL5421 X01LL5621 1,79 0,58 LL5 323 LL5 623 60 X01LL5323 X01LL5623 2,15 0,63 60 LL5 625 X01LL5625 2,54 0,68 60 LL5 327 LL5 627 X01LL5327 X01LL5627 2,96 GRÜN GmbH Spezialmaschinenfabrik Straßenmarkierungsmaschinen Siegener Str. 81-83 - D-57234 Wilnsdorf-Niederdielfen Tel. +49(0)271/3988-0 Fax: +49(0)271/3988-159 Internet-Adresse: www.marktec-gruen.com E-mail: info@marktec-gruen.com technische Änderungen vorbehalten / technical modification reserved! Stand 03.03.2009 Abbildungen teilweise in Sonderausführung! / partial pictures with special equipment!