DEUTSCHE NORM July 1998 Non-destructive testing of steel forgings Part 3: Ultrasonic testing of ferritic or martensitic steel forgings English version of DIN EN 10228-3 { EN 10228-3 ICS 77.040.20; 77.140.85 Descriptors: Forgings, steel, non-destructive testing. Zerstörungsfreie Prüfung von Schmiedestücken aus Stahl Teil 3: Ultraschallprüfung von Schmiedestücken aus ferritischem oder martensitischem Stahl European Standard has the status of a DIN Standard. A comma is used as the decimal marker. National foreword This standard has been prepared by ECISS/TC 28. The responsible German body involved in its preparation was the Normenausschuß Eisen und Stahl (Iron and Steel Standards Committee), Technical Committee Schmiedestücke. Normen-Download-Beuth-CDP BHARAT FORGE GmbH-KdNr.6946270-LfNr.3927930001-2008-02-15 07:52 No part of this standard may be reproduced without the prior permission of DIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH, D-10772 Berlin, has the exclusive right of sale for German Standards (DIN-Normen). EN comprises 19 pages. Ref. No. DIN -07 English price group 11 Sales No. 1111 12.98
EN 10228-3 May 1998 ICS 77.040.20; 77.140.85 Descriptors: Forgings, steel, non-destructive testing. English version Non-destructive testing of steel forgings Part 3: Ultrasonic testing of ferritic or martensitic steel forgings Essais non destructifs des pièces forgées en acier Partie 3: Contrôle par ultrasons des pièces forgées en aciers ferritiques et martensitiques Zerstörungsfreie Prüfung von Schmiedestücken aus Stahl Teil 3: Ultraschallprüfung von Schmiedestücken aus ferritischem oder martensitischem Stahl Normen-Download-Beuth-CDP BHARAT FORGE GmbH-KdNr.6946270-LfNr.3927930001-2008-02-15 07:52 This European Standard was approved by CEN on 1997-12-21. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom. ÈÉË European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1998. CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national members. Ref. No. E
Page 2 2 3 3 3 4 4 5 5 6 6 7 7 8 11 14 16 16 18 Normen-Download-Beuth-CDP BHARAT FORGE GmbH-KdNr.6946270-LfNr.3927930001-2008-02-15 07:52 19
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12 Amplitude Amplitude Range Probe position Normen-Download-Beuth-CDP BHARAT FORGE GmbH-KdNr.6946270-LfNr.3927930001-2008-02-15 07:52
Page 13 Amplitude Amplitude Range Probe position Normen-Download-Beuth-CDP BHARAT FORGE GmbH-KdNr.6946270-LfNr.3927930001-2008-02-15 07:52
Page 14
Page 15
Page 16
Page 17
Page 18 Beam path range D Maximum testable depth M Probe angle X Reflector Outside radius R Normen-Download-Beuth-CDP BHARAT FORGE GmbH-KdNr.6946270-LfNr.3927930001-2008-02-15 07:52
Page 19