Boomer M2 Battery Effectively powered the Boomer M2 Battery is a battery powered face drill rig with zero emissions for coverage areas up to 65 m 2
Boomer M2 Battery Cutting costs and boosting productivity with smart solutions The Boomer M-series face drilling rigs have become a key piece of equipment for mining and tunneling applications. As part of our commitment to continuous improvement, the face drilling rig has benefitted from a comprehensive upgrade, focusing on improved safety, increased robustness, battery power, automated functions and lower operational costs. What s so great about the Boomer M2 Battery? It s Clean The electric drive eliminates diesel emissions and minimizes the need for ventilation. It s Flexible Thanks to the onboard charging there is no need for stop and charging. The Boomer M2 Battery will charge during drilling and you can go directly to next face when finished drilling. It s Productive Large battery capacity and powerful motors provide the capacity to outperform diesel machines in most applications. It s Smart Like all Atlas Copco equipment. The Boomer M2 is automation ready. Add the functions you need, when you need them. 2
The battery is easily lifted from the top and thanks to its low position it s not affecting the visibility from the machine. Thanks to the large onboard battery the Boomer is able to perform long tramming distances between each face. Feed upgrades significant improvements in reliability Thanks to the robust and reliable BUT 36 booms, the Boomer M2 Battery has the same excellent multi capabilities as the diesel version. Our new rock drill COP MD20 has 10% more percussion power, 60% longer service intervalls and class leading hose life. New cabin ROPS and FOPS-certified for added safety (optional) Thanks to onbard charging possibilities there is no need to stop the machine to charge it. Upgraded boom the new heavy-duty BUT 36S boom is optimized for tough conditions Filtration package designed to protect the key assets on the drill rig (optional) Carrier improvements stronger axle for longer life Fully electrical driveline without diesel emissions 3
The good just got better There are always ways to improve and evolve equipment design. When contemplating what to focus on with the Boomer M-series upgrade, we utilized customer-focused workshops, site visits and feedback from operators and service technicians to identify what equipment areas should be enhanced. + Zero emission Thanks to its large electrical motor and battery, the Boomer M2 Battery is able to perform long tramming in challengeing conditions without any emission at all. This means a safer working environment underground with better air quality. At the same time the drill rig will charge the battery while drilling the face so there is no need to stop for charging during tramming. All this has been achieved without changing the size and usability of the machine. + COP MD20 - More productive and more robust The new generation of rock drills are more durable than ever, with improved penetration rate, drill steel economy, up to 30% less RDT consumption, less vibrations, higher hydraulic efficiency, up to 15% faster penetration rate than closest competitor and a recommended service interval of 1 000 impact hours. This means more uptime, increased productivity and lower running cost. + Safe bolting boom function The Boomer M-series is unique in the mining and construction world because it offers a safe bolting boom function for the semi-mechanized installation of rock bolts. Due to the design of the BUT 36S booms and the side platforms on both sides of the operator station, it is possible to swing the feed all the way back to a position where the operator can safely load bolts into the feed without having to pass in front of the machine into areas with an unsupported roof. More than a machine Atlas Copco Service backs up your equipment with sustainable solutions that deliver better safety, higher productivity and peace of mind. The Atlas Copco Service global offering is loaded with reliability and the highest availability. Atlas Copco aims to contribute to your profitability and add value to your operation. Contact your local Atlas Copco representative to find out what can be done to help your business. 4
Technical specifications = Standard = Option Drilling system COP 1638HD+ COP 1838HD+ COP 2238HD+ COP MD20 Hole blowing kit Water mist flushing, external water and air supply* Rock drill lubrication warning kit Lubrication air filtration system *Not in combination with COP 3038 Boom BUT 35 SL BUT 36 ST Automatic boom lubrication Feed BMH 6000-Series 12ft, 14ft, 16ft, 18ft Telescopic feed BMHT 6000-series (max 18 ft) Extension drilling set BSH 110 (BMH feeds only) Rod Adding System, RAS (BMH feeds only)* Water spraying kit on cradle *Not in combination with COP 3038, Max 14 ft feed Air/water system Hydraulically driven screw compressor Atlas Copco GA 5 Hydraulically driven screw compressor Atlas Copco GA 30* Hydraulic water booster pump, max capacity at 15 bar boost 200 l/min. Minimum water inlet, 2 bar at 200 l/min** Water hose reel *Might require a larger electrical motor **Depending on selected rock drill Hydraulic system Low oil level indicator Oil temperature gauge on oil tank, electronically supervised Filtration 16 μm Oil filter indicator Extra filtration package for water- and fine particle removal Mineral hydraulic oil Electrical oil filling pump Heater kit for hydraulic oil tank, diesel engine and electric motors Ni-Cr plated piston rods (limitations exist) Biodegradable hydraulic oil Atlas Copco Rig Control System (RCS 5) Advanced Boom Control (ABC) Pure Advanced Boom Control (ABC) Regular Advanced Boom Control (ABC) Total Measure While Drilling (MWD) Underground Manager PRO (PC software) Underground Manager MWD (PC software) for analysis of drill data Bolt view Control system Two operator panels (for standing operation only) Rig Acces Control Rig Remote Access (RRA), LAN or WLAN connection Total Station Navigation Dynamic Tunneling package Electrical drilling system Battery charger Dual controls for cable reel Stainless steel electrical enclosure *Depending on selected rock drill Battery charger Brand / Model: Artisan 65 kw Master Service, input 575VAC Total installed power 188 kw, Main motors 2*90 kw Sf 1.25 Voltage 575V 60Hz Starting method soft start Transformer 8 kva Electronic overload protection for electric motors Voltmeter/amperage meter in electric cabinet Percussion hour meter on operator display Phase sequence and eart fault indicator Cable reel, diameter 1 600 mm PC4 or PC5 Plug Battery Model: 88.5 kwh, LiFePO4, 630 VDC 5
Technical specifications = Standard = Option Carrier and electrical driveline Electric motor 127 kw / 403 Nm continuously Drifter rods Battery 88.5 kwh COP 1838 32 000 series transmission COP 2238 Articulated steering ±41 steering angle* COP MD20 Four-wheel drive Electric system 24 V Batteries 2x125 Ah Hose/cable guiding at water/cable reel Dana 113 (Short) axles Automatic differential lock on axles, limited slip Tires 12.00 x R24 Clearance outside axles 13º rear, 22º front Tramming lights 6 x 40 W LED, 2 x 70 W, 24 V DC Working lights 4 x 35 W HID, 24 V DC Illuminated stairs LED Central lubrication system Fire suppression system ANSUL (Manual, checkfire or automatic) Fire suppression system FORREX (Automatic) Rig washing kit Manual lubrication kit Boot washing kit Hydraulic Swellex pump type H1 for manual installation Hydraulic outlet for charging with Mini SSE *If RHS E or SP2 service platform is equipped the steering angle will be reduced to 30 Rock drill Rod Min. hole diameter (mm) SR35-H35-T38 Speedrod 38 SR35-H35-T38 38 SR35-R39-T38 45 Extension rods for injection drilling/ras Rock drill Rod Min. hole diameter (mm) COP 1838 COP 2238 COP MD20 Rnd 32 Speedrod 54 Rnd 39 Speedrod 64 Shank adapters Rock drill Rod Min. hole diameter (mm) R38 38 COP 1838 T38 38 COP 2238 R32* COP MD20 38 T38 38 *Intended for RAS and extension drilling with BSH 110 Couplings Rock drill Rod Diameter (mm) Length (mm) COP 1838 COP 2238 R38 55 170 T38 55 170 Cabin (optional) ROPS and FOPS approved cabin, noise level <80 db(a) Mounting height -140/+250 mm Noise and vibration Low profile cabin -150 mm Operator sound pressure level in canopy, drilling, free field (ISO 11201) Air conditioning unit Operator sound pressure level in cabin, drilling, free field (ISO 11201) 12 V outlet for communication radio Operator sound pressure level working close to machine, drilling, Electrical heater, 1.2 kw, 230 V (CE) free field Reversing camera with monitor Heating function for air conditioning (water transferred) Fixed seat Swingable seat for drilling and tramming Cabin body made of stainless steel Joystick-controlled spotlights left and/or right, 70 W Front window, 24 mm Media player Sound power level (ISO 3744), drilling, free field Vibration levels seated, drilling (ISO 2631-1) Cabin Vibration levels standing, drilling (ISO 2631-1) Cabin COP MD20 T38 TBA TBA 104± 6 db(a) re 20uPa 75± 3 db(a) re 20uPa 104±6 db(a) re 20uPa 128 db(a) re 1pW* 0.07± 0.07 m/s^2 0.07±0.07 m/s^2 Protective roof Mounting height -80 mm/+310 mm Manual spotlight, left and/or right Two operator panels (for standing operation only) Swingable seat for drilling and tramming (one operator panel only) 6
Technical specifications 1 440 L feed BMH 154 A 21 571 H 2 387 2 213 11 205 262 2 016 2 170 796 244 3 156 4 186 932 Ltot Boomer M-series equipped with COP 1838. Height H std H -140 H +250 H protective roof H protective roof lowered 12.00 R24 3031 2891 3281 2995 2300 Feed Ltot BMH 6812 13915 BMH 6814 14510 BMH 6816 15120 One boom rig 1 600 7 483 7 178 Two boom rig 200 9 655 10 068 Boomer M-series, coverage area. Dimensions Width (excluding jacks) Ground clearence Turning radius outer/inner 2 300 mm 260 mm 7 200/4 400 mm Tramming speed On flat ground (Rolling resistance 0.05) 15 On incline 1:8 5 Gross weight (depending on configuration) Rig type Total Boom side Engine side Two boom rig 29 000 kg 19 000 kg 10 000 kg 7
9851 3629 01a 2017-07 Örebro, Sweden. Legal Notice Copyright 2017, Atlas Copco Rock Drills AB, Örebro, Sweden. Illustrations and photos may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific information. Committed to sustainable productivity We stand by our responsibilities towards our customers, towards the environment and the people around us. We make performance stand the test of time. This is what we call Sustainable Productivity. www.atlascopco.com