DEUTSCHE NORM December 1999 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure Unplasticized poly(vinyl chloride) (PVC-U) Part 1: Specifications for pipes, fittings and the system English version of DIN EN 1329-1 { EN 1329-1 ICS 23.040.01; 91.140.80 Kunststoff-Rohrleitungssysteme zum Ableiten von Abwasser (niedriger und hoher Temperatur) innerhalb der Gebäudestruktur Weichmacherfreies Polyvinylchlorid (PVC-U) Teil 1: Anforderungen an Rohre, Formstücke und das Rohrleitungssystem This standard, together with DIN 19531-10, December 1999 edition, supersedes DIN 19531, November 1987 edition. European Standard has the status of a DIN Standard. A comma is used as the decimal marker. National foreword This standard has been prepared by CEN/TC 155. The responsible German body involved in its preparation was the Normenausschuß Wasserwesen (Water Practice Standards Committee), Technical Committee Kunststoffrohre in der Abwassertechnik. It should be noted that for a period ending 31 January 2001 DIN 19531 continues to be valid in Germany. During this period poly(vinyl chloride) pipes for use inside buildings may be manufactured to conform either to DIN 19531 or to the present standard, in conjunction with DIN 19531-10. DIN EN ISO 1043-1*) and DIN 53479 are the standards corresponding to International Standards ISO 1043-1 and ISO 1183, respectively, referred to in clause 2 of the EN. Amendments DIN 19531, November 1987 edition, has been superseded by the specifications of EN 1329-1. Previous editions DIN 19531: 1964-09, 1968-01, 1977-03, 1980-03, 1987-11. Normen-Download-Beuth-FIRAT Plastik A.S.-KdNr.6924716-LfNr.2957826001-2005-10-07 10:15 National Annex NA Standard referred to (and not included in Normative references and Annex B) DIN 53479 Determination of density of plastics and elastomers *) At present at draft stage. No part of this standard may be reproduced without the prior permission of DIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH, D-10772 Berlin, has the exclusive right of sale for German Standards (DIN-Normen). EN comprises 34 pages. Ref. No. DIN -12 English price group 14 Sales No. 1114 05.00
EN 1329-1 January 1999 ICS 23.040.01; 91.140.80 English version Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure Unplasticized poly(vinyl chloride) (PVC-U) Part 1: Specifications for pipes, fittings and the system Systèmes de canalisations en plastique pour l évacuation des eauxvannes et des eaux usées (à basse et à haute température) à l intérieur de la structure des bâtiments Poly(chlorure de vinyle) non plastifié (PVC-U) Partie 1: Spécifications pour tubes, raccords et le système Kunststoff-Rohrleitungssysteme zum Ableiten von Abwasser (niedriger und hoher Temperatur) innerhalb der Gebäudestruktur Weichmacherfreies Polyvinylchlorid (PVC-U) Teil 1: Anforderungen an Rohre, Formstücke und das Rohrleitungssystem Normen-Download-Beuth-FIRAT Plastik A.S.-KdNr.6924716-LfNr.2957826001-2005-10-07 10:15 This European Standard was approved by CEN on 1998-11-01. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom. ÈÉË European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1999. CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national members. Ref. No. E
Page 2 3 5 5 6 6 8 8 8 8 9 9 9 9 9 9 9 9 12 16 21 23 23 26 Normen-Download-Beuth-FIRAT Plastik A.S.-KdNr.6924716-LfNr.2957826001-2005-10-07 10:15 26 26 27 27 28 28 29 29 29 30 30 31 31 31 34
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 16
Page 17
Page 18
Page 19
Page 20
Page 21
Page 22
Page 23
Page 24
Page 25
Page 26
Page 27
Page 28
Page 29
Page 30
Page 31
Page 32
Page 33
Page 34