SECTION CHASSIS AND CONTAINER COMPONENTS Locking Pins... -... - Twist Locks... -... -... -... - Intermediate Headers... -... - Rear Corner Posts / Rear Bolsters... -... - Front Corner Posts... -... - Miscellaneous Parts... -8... -8 Container Rail Splice Plates... -9... -9 Lower Rails... -0 Upper Rails... -
LOCKING PINS Note: than are listed in this catalog. Please call with TWIST LOCK Part Number Remarks Type 0 89 008 0 0 89 008 0 Roadside JI90..000-S 8 TWIST LOCK BREAKDOWN Item No. Part Number Description Quantity 8 JI90.8.00 JI90..00S JI90.8.00 JI000.00.00 JI000.00.00 JI90.000.8 JI90.000.9 P-0 Housing Locking Pin Hex Bolt - /" x " Sec. Bolt - /" Spring Ball Chassis and Container Components -
LOCKING PINS Note: than are listed in this catalog. Please call with FRONT PIN LOCK Part Number 0 80 00 00 0 80 00 00 Remarks Roadside, 8 FRONT PIN LOCK BREAKDOWN Item No. Description Quantity 8 Housing Latch Bolt Handle Locking Pin Tension Pin Grip - Chassis and Container Components
LOCKING PINS FRONT LOCKING PIN ASSEMBLY Part Number Remarks Type 0 89 008 0 0 89 008 0 0 89 009 0 0 89 009 0 Roadside Roadside FB88HL FB88HL FRONT LOCKING PIN BREAKDOWN FB88HL STYLE SHOWN FOR REFERENCE ONLY Item No. Description Quantity Housing Latch Rolled Pin - /" x /8" Rolled Pin - /8" x /8" Chassis and Container Components -
TWIST LOCKS NON-RETRACTABLE TWIST LOCK Part Number 0 80 00 00 0 80 00 00 Remarks Roadside 9 8 NON-RETRACTABLE TWIST LOCK BREAKDOWN SHOWN FOR REFERENCE ONLY Item No. Description Quantity 8 Stem or Pin Grease Fitting Spring Ball Operating Handle Left Hand Operating Handle Right Hand Latch 9 Rivet - Chassis and Container Components
TWIST LOCKS Part Number JI90..000 TWIST LOCK Remarks Same Roadside Remove and Replace Handle 0 9 8 NON-RETRACTABLE TWIST LOCK BREAKDOWN FNS STYLE SHOWN FOR REFERENCE ONLY Item No. Description Quantity 8 9 0 Housing Locking Pin Handle Latch Hex Bolt - /" x " Hex Bolt - /8" x /" /" /8" Spring Ball Chassis and Container Components -
STACKING POST ASSEMBLIES Stacking Post Assembly Stacking Post Assembly Call with VIN (Serial Number) for correct application INTERMEDIATE HEADERS Intermediate Header Assembly Intermediate Header Assembly Note: Center latch for J.B. Hunt container chassis ( 0 88 000 00 EB90-P Call with VIN (Serial Number) for correct application - Chassis and Container Components
REAR CORNER POSTS / REAR BOLSTERS Rear Corner Post Rear Bolster Assembly Rear Bolster Assemblies consist of: Bottom Plate Gusset Top Channel Illustration shown for reference only. Call with VIN (Serial Number) for correct application FRONT CORNER POSTS Illustration shown for reference only. Call with VIN (Serial Number) for correct application Chassis and Container Components -
MISCELLANEOUS PARTS " Call with VIN (Serial Number) for correct application /" /" TUNNEL SIDE LEG Number Length 0 008 000 " -8 Chassis and Container Components
CONTAINER RAIL SPLICE PLATES Upper and Lower Rail Splicing Statement for Trailers, Inc. When repairs are to be made to the upper and/or lower rail of a container it is imperative that it be done properly. The repair procedure and materials to be used should be according to the vehicle manufacture s recommended repair procedure for that particular trailer. For the best results it is recommended by the A.A.R.(Association of American Railroads) no more than one splice section of rail is permitted in any upper or lower rail between the intermediate stacking frames. In addition, no more than one splice is permitted feet from forward stacking frame of container. The splice material, number and type of fasteners should provide strength requirements equal to or better than the original section of rail. With these things in mind, properly repairing the upper and/or lower rail should provide the container with the structural integrity required of it for its useful life. A B B A B A ' 0" A B Permissible Splice Locations If splice(s) exist(s) at any A location, then splice is permitted at any other A location(s). If splice(s) exist(s) at any B location, then splice is permitted at any other B location(s). Neither A location may be spliced if either B location on the same side is spliced. Neither B location may be spliced if either A location on the same side is spliced. ' 0" Note: No more than one splice section of rail is permitted in any upper or lower rail. Important Notice Absolutely no welding is to be used when structural repairs are done to extruded aluminum upper and lower rails. Upper and lower rails on all containers are made from a heat treated aluminum alloy, 0-T, with specific strength features required for containers. Chassis and Container Components -9
CONTAINER RAIL SPLICE PLATES Lower Rails Lower Rail Splice Procedure Do not weld on the lower rail. of the centerline of a sidewall post.,, Seal with Butyl Caulk or Equivalent Lower Rail INTERIOR VIEW SECTION Item No. Part Number Description Quantity 0 098 0 0 0 80 0 90 0 90 0 900 0 900 Inner Splice Plate Outer Splice Plate Tape Sealant " Wide * Magna Grip Pin MGPB-R8-0-CA * Magna Grip Collar MGC-R8-C * Magna Grip Pin MGPB-R8--CA * Magna Grip Collar MGC-R-C " 0 0 0 0-0 Chassis and Container Components
CONTAINER RAIL SPLICE PLATES Lower Rails Lower Rail Splice Procedure Do not weld on the lower rail. of the centerline of a sidewall post. Countersink Rivets EXTERIOR VIEW Tape Splice Plates FOR CONTAINERS WITH BOTTOM RAIL SECTION 0 80 Item No. Part Number Description Quantity SECTION 0 80 0 80 0 80 0 900 0 900 0 980 0 XX Lower Splice Plate Upper Rail Splice Plate Tape Sealant " Wide * Magna Grip Pin /8 Dia. x.-.8 * Magna Grip Collar /8 Dia. Rivet, CSK HD, / Dia., -T Alum. 0" 8 Chassis and Container Components -
CONTAINER RAIL SPLICE PLATES Upper Rails Upper Rail Splice Procedure Do not weld on the upper rail., Upper Rail, Seal with Butyl Caulk or Equivalent INTERIOR VIEW SECTION FOR CONTAINERS WITH UPPER RAIL SECTION 0 00 Item No. Part Number Description Quantity *Huck Mfg. Co. 0 08 0 80 0 00 0 90 0 90 Inner Rail Splice Plate Tape Sealant " Wide Outer Rail Splice Reinforcement * Magna Grip Pin MGPB-R8-0-CA * Magna Grip Collar MGC-R8-C 0" 8 8,, INTERIOR VIEW Upper Rail Seal with Butyl Caulk or SECTION FOR CONTAINERS WITH UPPER RAIL SECTION 0 098 Item No. Part Number Description Quantity *Huck Mfg. Co. 0 09 0 80 0 00 0 90 0 90 0 0 Inner Rail Splice Plate Tape Sealant " Wide Outer Rail Splice Reinforcement * Magna Grip Pin MGPB-R8-0-CA * Magna Grip Collar MGC-R8-C Upper Rail Splice Reinforcement 0" 8 8 - Chassis and Container Components
CONTAINER RAIL SPLICE PLATES Upper Rails Upper Rail Splice Procedure Do not weld on the upper rail., INTERIOR VIEW Tape Splice Plate, SECTION FOR CONTAINERS WITH UPPER RAIL SECTION 0 8 Item No. Part Number Description Quantity *Huck Mfg. Co. 0 80 0 80 0 90 0 90 Upper Rail Splice Plate Tape Sealant " Wide * Magna Grip Pin MGPB-R8-0-CA * Magna Grip Collar MGC-R8-C " 8 8 Chassis and Container Components -
NOTES - Chassis and Container Components