Parts Mark VII Max, Mark X Premium, and Mark X Max Electric Airless Sprayers 3A2528C EN For Portable Airless Spraying of Architectural Coatings and Paints. For professional use only. Not approved for use in European explosive atmosphere locations. 3300 psi (227 bar, 22.7 MPa) Maximum Working Pressure IMPORTANT SAFETY INSTRUCTIONS Read all warnings and instructions in the Operation manual. Save these instructions. Related Manuals: 3A2243 ti8238a 3A2244 309495 30849 Mark VII Max Mark X Premium Mark X Max
Parts - Mark VII Max and Mark X Max Parts - Mark VII Max and Mark X Max 26 58 8 24 23 59 92 Mark X 55 99 68b 68f 68d 68 68a 228 27 84 79 37 36 89 30 90a 90 6 68c 85 5 68e 28 54 03 43 04 87 88 05 83 3 Page 9 2 06 60 65 07 9 56 94 5 55 4 44 68 4 22 0 62 7 93 48 9 8 ti8677a 87 Mark X Pages 6 and 7 2 3A2528C
Parts - Mark VII Max and Mark X Max Parts List - Mark VII Max and Mark X Max 6 5C753 SCREW, mach, hex wash hd 6 8 5E89 CLIP, retaining 2 0 56306 WASHER, flat 2 9509 WHEEL, pneumatic 2 2 065 WASHER, lock, hi-collar (Mark VII) 4 2600 WASHER, lock, hi-collar (Mark X) 4 4 4666 SCREW, cap, socket head (Mark VII) 4 2599 SCREW, cap, socket head (Mark X) 4 7 276974 CAP, leg 2 9 2746 NUT, lock, nylon, thin pattern 8 22 6038 WASHER, wave spring 2 28 4672 WASHER, thrust 2 30 4699 WASHER, thrust 3 8444 SCREW, mach, slot hex wash hd 4 36 692 WASHER, thrust 37 00057 SCREW, cap, hex hd 4 4 5G880 FITTING, pump, quick disconnect (Mark VII) 43 9778 SPRING, retaining (Mark VII) 9677 SPRING, retaining (Mark X) 44 5F0 PIN, pump (Mark VII) 5F097 PIN, pump (Mark X) 48 89920 STRAINER, (- /2 npsm) 5 6N409 COVER, drive, plastic, painted (includes 3) (Mark VII) 6N40 COVER, drive, plastic, painted (includes 3) (Mark X) 55 C2095 O-RING 58 287282 SHIELD, motor, painted (includes 24, 23) 62 24J083 FRAME, platinum 83 287933 HOUSING, bearing (Mark VII) 287934 HOUSING, bearing (Mark X) 84 25788 MOTOR, electric (includes 26, 27) (Mark VII) 258909 MOTOR, electric (includes 26, 79, 228) (Mark X) 85 287472 ROD, connecting (includes 43, 44) (Mark VII) 287473 ROD, connecting (includes 43, 44) (Mark X) 87 24920 DEFLECTOR, threaded 89 287290 GEAR, combination (includes 28, 30) (Mark VII) 288035 GEAR, combination (includes 28, 30) (Mark X) 90 24M47 HOUSING, drive (includes 6, 36) (Mark VII) 287990 HOUSING, drive (includes 6, 36) (Mark X) 90a 9473 WASHER 9 24M46 PUMP, displacement (includes 4, 55) (Mark VII) 287946 PUMP, displacement (Mark X) 93 287952 HOSE, drain (includes 87) 94 288659 HOSE, coupled, /2 in. (includes 5) (Mark VII) 6P256 HOSE, coupled, /2 in. (includes 5) (Mark X) 03 287253 TOOL BOX (includes 04) 04 8852 SCREW, thd forming, hex washer hd 3 05 5Y455 BAR, kick stand 06 5C982 CAM, cart 2 07 453 SCREW, mach, hex washer hd 4 23 276980 GROMMET, cover 2 24 9250 SCREW, shoulder 2 26 5D088 FAN, motor (Mark VII) 5V577 FAN, motor (Mark X) 27 5477 SCREW, mach, torx pan hd (Mark VII) 5 09450 PACKING, o-ring 54 5F584 LABEL, ProConnect 56 288899 SHELF, ultra, pem assembly 59 278075 BRACKET, wire 60 24M97 BRACKET, hose wrap 65 7633 SCREW, slot hex wash hd 2 68 24M6 KIT, check valve (includes 68a - 68f) 68a 6N46 HOUSING, seat, check valve 68b 6N462 HOUSING, ball, check valve 68c 24M725 KIT, repair, check valve (includes 68d, 68e, 68f, 55) 68d O-RING 68e SEAT, valve 68f BALL, ceramic 79 5G845 SPACER, standoff 2 8 5Y8 LABEL, Made in the USA 87 6N555 LABEL, brand, Mark Max 88 6N559 LABEL, brand, Mark VII Max, front 6N56 LABEL, brand, Mark X Max, front 92 6N565 LABEL, brand, Mark Max, Platinum 99 6N563 LABEL, brand, Mark VII Max, side 6N562 LABEL, brand, Mark X Max, side 228 22347 RING, retaining, external (Mark X) 3A2528C 3
Parts - Mark X Premium Parts - Mark X Premium 58 8 24 99 55 68b 68f 68d 228 26 4 84 79 9 37 23 03 28 36 59 89 30 90a 90 43 6 85 68c 68e 5 54 68a 98 83 04 06 05 07 9 56 94 5 55 68 44 3 70 69 Page 9 22 0 23 8 62 9 7 93 48 87 ti8678a 30 Pages 6 and 7 29 4 3A2528C
Parts - Mark X Premium Parts List - Mark X Premium 4 24A250 HANDLE, assy 6 5C753 SCREW, mach, hex wash hd 6 8 5E89 CLIP, retaining 2 0 56306 WASHER, flat 2 9509 WHEEL, pneumatic 2 7 276974 CAP, leg 2 9 2746 NUT, lock, nylon, thin pattern 8 22 6038 WASHER, wave spring 2 23 0963 SCREW, cap, flange head 2 28 4672 WASHER, thrust 2 30 4699 WASHER, thrust 3 8444 SCREW, mach, slot hex wash hd 4 36 692 WASHER, thrust 37 00057 SCREW, cap, hex hd 4 43 9677 SPRING, retaining 44 5F097 PIN, pump 48 89920 STRAINER, (- /2 npsm) 5 287992 COVER, drive, plastic, painted (includes 3) 55 C2095 O-RING 58 287282 SHIELD, motor, painted (includes 23, 24) 62 288663 FRAME, cart, Mark X 83 287934 HOUSING, bearing 84 258909 MOTOR, electric, Mark X, (240V) (includes 26, 79, 228) 85 287473 ROD, connecting (includes 43, 44) 87 24920 DEFLECTOR, threaded 89 288035 GEAR, combination (includes 28, 30) 90 287990 HOUSING, drive, Mark X (includes 6, 36) 90a 9473 WASHER 9 287946 PUMP, displacement 93 287952 HOSE, drain, Ultra hi-boy (includes 87) 94 6P256 HOSE, coupled, /2 in. (includes 5) (Mark VII) 03 287253 TOOL BOX (includes 04) 04 8852 SCREW, thd forming, hex washer 3 hd 05 5Y455 BAR, kick stand 06 5C982 CAM, cart 2 07 453 SCREW, mach, hex washer hd 4 23 276980 GROMMET, cover 2 24 9250 SCREW, shoulder 2 26 5V577 FAN, motor 29 278499 HOSE, cpld, /2 in. x 50 ft, 3300 wp 30 245820 GUN, inline texture 5 09450 PACKING, o-ring 54 5F584 LABEL, ProConnect 56 288899 SHELF, ultra, pem assembly 59 278075 BRACKET, wire 68 24M6 KIT, check valve (includes 68a - 68f) 68a 6N46 HOUSING, seat, check valve 68b 6N462 HOUSING, ball, check valve 68c 24M725 KIT, repair, check valve (includes 68d, 68e, 68f, 55) 68d O-RING 68e SEAT, valve 68f BALL, ceramic 69 2599 SCREW, cap, socket head 4 70 2600 WASHER, lock, spring, (hi-collar) 4 79 5G845 SPACER, standoff 2 8 5Y8 LABEL, Made in the USA 9 08795 SCREW, mach, pnh 4 98 5G968 LABEL, front, Mark X 99 5G969 LABEL, side, Mark X 228 22347 RING, retaining, external 3A2528C 5
Parts - Mark VII and Mark X Control Box and Board Parts - Mark VII and Mark X Control Box and Board 8 29 38 96 93 3 39 79 78 57 38 46 3 3 7 82 68 47 95 82 34 75 33 76c 76a 6 76b 58 45 42 70 75 ref ti8450a 26 52 49 23 7 75b 63 3 5G935 CONNECTOR, electrical 7 0754 PLUG, pipe 3 2020 SCREW, mach, pan head 4 23 0963 SCREW, cap, flange head 2 26 439 SCREW, grounding 29 6K49 GROMMET, motor lead 33 5D527 SWITCH, rocker, 240V 34 667 KNOB, potentiometer 38 6252 SCREW, #0, taptite phil 4 39 6876 WASHER 2 42 7745 BUSHING, strain relief 45 7625 NUT, locking 46 257905 CONTROL, board (Mark VII) 24M0 CONTROL, board (Mark X) 49 2249 LOCK, cord 52 6N278 CONTROL, board, blue, 50 amp, 230 57 PAD, foam (included in 96) 6 6M839 BOX, control, Mark VII 6M579 BOX, control, Mark X 63 5X508 LABEL, brand (Max units) 98648 LABEL (Premium units) 68 5X480 PANEL, control (Max units) 5X67 PANEL, control (Premium units) 70 5D036 GASKET, control box 75 6M834 CORD, power, w/ iec cee 7/7 (Mark VII) 5G957 CORD, power, w/ iec cee 7/7 (Mark X) 6M836 CORD, power, multi (Mark VII) 5G938 CORD, power, multi (Mark X) 75b 25303 KIT, accessory, cordset, global 78 6D640 GASKET 79 6D642 GASKET 82 25629 POTENTIOMETR, assembly (includes fastening nut) 96 257444 KIT, repair, display (Max units) (includes 38, 57, 63, 93) 287286 KIT, repair, display (Premium units) (includes 38, 57, 63, 93) 7 26029 SWITCH, rocker 8 2084 FITTING, hydraulic 3 9228 SCREW, mach, flat hd 4 38 6G596 LABEL, warning icons intl 47 5X903 LABEL (Max units) 5X902 LABEL (Premium units) 58 258644 SWITCH, reed (Max units) 76 287943 KIT, repair, coil (Mark X) 76a COIL, filter (Mark X) 76b SCREW, machine, flat head (Mark X) 76c NUT, lock (Mark X) 93 5X507 LABEL, brand, smartcontrol (Max units) 5K394 LABEL, control box cover (Premium units) 95 22725 GASKET (Max units) 5C973 GASKET (Premium units) Replacement warning labels are available at no cost. 6 3A2528C
Parts - Filter Assembly Parts - Filter Assembly 66 9 Mark X Premium units 4 74 94 92 3 20 4 40 86 5 80* 72* 73* 64 35 67 84 6 Mark VII units 80 50 2 74* 50* 75* ti845a 22533 FITTING, 45 degree, elbow, #8 JIC x 3/8 tube (Mark VII) 25926 FITTING, elbow, 90 deg (Mark X) 9 7285 PACKING, o-ring 5 6M504 PACKING, square ring 2 20 457 PACKING, o-ring 2 5C972 PIN, spring 35 0550 WASHER, lock, spring (hi-collar) 4 40 5D033 GROMMET, transducer 50 24E233 KIT, handle, fast flush (Mark VII) (includes 2) 5G563 HANDLE, valve (Mark X) 64 6M543 SCREW, cap, shc 4 66 5C765 CAP, filter 67 6M70 BASE, filter 74 5C766 TUBE, diffusion 80 24A38 VALVE, prime, heavy duty *287879 VALVE, drain, assy (Mark X) 86 243222 TRANSDUCER, pressure control (includes 20) 92 24407 FILTER, fluid 30 mesh 244067 FILTER, fluid 60 mesh, original equip 244068 FILTER, fluid 00 mesh 244069 FILTER, fluid 200 mesh 3 6K65 SPACER, manifold 4 0483 PLUG, pipe 6 24J08 TUBE, formed (Mark VII) 6M44 TUBE, formed (Mark X) 72 9370 SEAL, seat, valve 73 93709 SEAT, valve 74 4708 SPRING, compression 75 6424 NUT, cap 84 23739 SEAL, fitting, flared 94 59239 FITTING, nipple, pipe, rdcg * 24503 Drain valve repair kit is available (includes 50, 80, 72, 73, 74, 75) 3A2528C 7
Parts - Hose Reel and Guns Parts - Hose Reel and Guns 2 26 25 24 20 225 23 22 229 228 227 27 29 222 220 223 5 6 84 8 6 ref Mark VII Mark X 30 30 29 203 202 230 97 66 94 29 230 66 97 29 ti8754a 8 3A2528C
Parts - Bearing Housing Parts List - Hose Reel and Gun 5 6C975 PLATE, pivot mount 6 23 FITTING, connector, npt x jic 8 26022 SCREW, hex washer hd, thd form 2 29 278499 HOSE, cpld, /2 in. x 50 ft, 3300 2 WP 30 289605 GUN, spray, texture 245820 GUN, inline, texture 6 24J08 TUBE, formed (Mark VII) 6M44 TUBE, formed (Mark X) 66 24B94 TRANSMITTER, pressure, remote 84 23739 SEAL, fitting, flared 94 59239 FITTING, nipple, pipe, rdcg 97 9239 HOSE, CPLD, 3/8 in. x in. 0 ft 202 5984 BUSHING, 3/8 in. x /4 in. 203 8908 SWIVEL 20 24B69 REEL, hose 2 24E400 PIN, pop, lock out 22 2258 SCREW, shoulder, sch 23 22542 SPRING, die 24 278085 HANDLE, swivel 25 22669 WASHER, flat 26 5X68 NUT, swivel, handle 27 6756 ELBOW, 45 degree 29 83285 ADAPTER (Mark VII) 59239 ADAPTER (Mark X) 3 220 24E06 TUBE, hose reel, pivot 222 22607 WASHER, flat 2 223 22534 SPRING, wave 225 22524 RING, retaining, external 227 24B248 CAP, swivel, complete 228 22347 RING, retaining, external 229 22787 CAP 230 5849 FITTING Parts - Bearing Housing 4 39 24 08 56 86 24 40 ti8667a 52 Parts List - Bearing Housing 53 24 5F6 LATCH, handle 77 278204 CLIP, drain line 08 5F503 SCREW, set, socket 24 9250 SCREW, shoulder 39 5E625 PIN, housing, bearing 40 5G890 LATCH, bearing housing 4 040 NUT, lock, insert, nylock, 5/6 2 52 5G584 RECEIVER, clamp 53 6942 SCREW, shoulder, skt hd 56 5F498 SCREW, adjustment 86 00985 WASHER, lock ext 77 3A2528C 9
Notes Notes 0 3A2528C
Notes Notes 3A2528C
Graco Standard Warranty Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco s written recommendations. This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non-graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco. This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation. THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. Graco s sole obligation and buyer s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale. GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these warranties. In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the negligence of Graco, or otherwise. Graco Information For the latest information about Graco products, visit www.graco.com. TO PLACE AN ORDER, contact your Graco distributor or call -800-690-2894 to identify the nearest distributor. All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. For patent information, see www.graco.com/patents. Original instructions. This manual contains English. MM 3A2528 Graco Headquarters: Minneapolis International Offices: Belgium, China, Japan, Korea GRACO INC. AND SUBSIDIARIES P.O. BOX 44 MINNEAPOLIS MN 55440-44 USA Copyright 2009, Graco Inc. All Graco manufacturing locations are registered to ISO 900. www.graco.com September 202