Dual Lamp Ceramic Metal Halide 3 Lumen Packages in 1 Luminaire For additional configurations see our Product Catalog or visit our website at
WINDIRECT TM 3 in1 Dual Lamp Ceramic Metal Halide CMH x 2 1 Luminaire 2 Lamps 3 Output Levels Luminaire... Available in All Mounts 1High performance two-lamp packages are now available for ceramic metal halide in all mounts. Mixing and matching lamp wattages allows for unique flexibility and excellent performance. Shedding load is as simple as independently circuiting each lamp. Wall Mount Ceiling Mount Semi-Recessed Ceiling Pendant Mount Semi-Recessed Wall Base Mount Cantilever Mount 2
Dual Lamp CMH 2Ceramic Metal Halide Lamps in a Single Reflector Designed for Flexibility and Performance Five new dual combinations have been added creating an extensive series of output levels and options. As with our single source metal halide, these new packages offer superior asymmetric performance and color rendering along with the unique ability to provide multi-level output. Available T6 Metal Halide Packages Wattage Lamp Packages Peak Candela MH39 (1)39wT6 1,745 cd MH70 (1)70wT6 3,417 cd MH109 (1)39wT6 & (1)70wT6 5,145 cd* MH140 (1)70wT6 & (1)70wT6 6,600 cd* MH150 (1)150wT6 7,272 cd MH189 (1)39wT6 & (1)150wT6 8,499 cd MH220 (1)70wT6 & (1)150wT6 10,716 cd MH300 (1)150wT6 & (1)150wT6 13,215 cd Indicates New Dual Lamp Combinations *Estimated 3 High Performance Light Levels... Independent Switching Creates Variable Output Without Sacrificing Performance Case Study MH220 Independent testing confirms uniform smooth beam performance whether one or both lamps are energized. Regardless of wattage combination, the distribution pattern remains uniform for all three output levels. 180 160 140 180 160 140 180 160 140 120 120 120 110 110 110 90 90 90 MH70 lamp only 3,719 cd MH150 lamp only 7,063 cd MH220 both MH70 10,716 cd & MH150 lamps 10 fc 15 fc 10 fc 15 fc 25 fc 15 15 fc 25 fc 35 fc 15 45 fc 25 fc 35 fc 45 fc 15 BALL test report 12942 BALL test report 12943 BALL test report 12941 3
HID Wall & Ceiling Mount Surface Wall Mount INDOOR OUTDOOR WINDIRECT TM P2 (solid) P3 (perforated) P4 (scalloped) *P5 Location (damp label) Outdoor Location (wet label) SSW: Wet Basic P2 Solid P3 Perforated P4 Scalloped *P5 Short Note: *P5 (short visor) does not provide the same sightline shielding as the P2, P3 or P4 visors. P2 - SS - MH300-277V - SS1 - SGW - X - STD PROFILE LAMPING VOLTAGE MOUNTING FINISH OPTIONS CLASS Code Description MH300 (1)150w T6-G12 x (1)150w T6-G12 BALLAST LENGTH WEIGHT Remote 12" 5 lbs. Integral 16" 20 lbs. Integral SR3 12" 10 lbs. Integral MH39, 12" 10 lbs. MH70 *Not available for MH189, MH220 and MH300. **For use in non-insulated walls only. Not available for two-lamp packages. SS1: Simple Yoke SD1: Deco Yoke SK1: Knuckle Integral Ballast SS3: Simple Yoke *SS5: Simple Yoke SD3: Deco Yoke **SR3: Recessed Ballast Simple Yoke SGW: Semi-Gloss Iridescent (gloss finish) PBP:Pale Bronze to be SB: Straight Blade Baffle (external mount) PG: Patterned Glass Lens (wide distribution) NT: Natatorium Construction Special Option specifying a MH300 Report #: 12741 Surface Ceiling Mount INDOOR OUTDOOR Basic P5 Short - SS - MH150-277V - SS8 - SGW - X - STD PROFILE LAMPING VOLTAGE MOUNTING FINISH OPTIONS CLASS P5 (damp label) Outdoor (wet label) SSW: Wet * * * Code Description MH300 (1)150w T6-G12 x (1)150w T6-G12 BALLAST LENGTH WEIGHT Remote 12" 5 lbs. Integral 16" 20 lbs. Integral MH39, 12" 10 lbs. MH70 *Remote ballast only SS8: Simple Yoke SD8: Deco Yoke SK8: Knuckle Integral Ballast SS10: Simple Yoke SGW: Semi-Gloss Iridescent (gloss finish) to be SB: Straight Blade Baffle (external mount) MP: Micro-Prismatic Lens (max. forward throw) NT: Natatorium Construction Special Option specifying a MH150 Report #: 10953 4
WINDIRECT TM 6-3/8" (162mm) 4-3/4" (121mm) 4-7/8" (124mm) 3-3/8" (93mm) Surface Wall Mount INDOOR OUTDOOR 3-3/4" (95mm) 3-7/8" (98mm) 6-1/2" (165mm) 10-3/8" (264mm) DRYWALL 4-3/4" (121mm) 3-7/8" (98mm) Wall & Ceiling Mount HID Profile - : Anodized, extruded aluminum specular reflector with solid aluminum endcaps and stainless steel hardware. Extruded aluminum visors are combined with basic profile to create P2, P3, P4 & P5 profiles. Type - profile with ; captive, extruded alum. hinge with non-gasketed 1" (25mm) SIZE Outdoor; captive, extruded alum. door with window cut-out for regressed lens and silicone gasket. Lens; micro prismatic tempered glass lens Mounting - Three standard mounts are fully adjustable and lockable. Designed for remote or integral ballast. Performance - Asymmetric distribution provides a concentration of APPLICATION light on target surface for smooth illumination. Maximum candlepower aimed 115 above nadir has less than 10% spill light within the 0-115 zone and less than 3% spill light within the 180-270 zone. LAMP Electrical - Electronic ballasts are provided standard for 39w and 70w lamps, CWA magnetic ballast for 150w lamp. Electronic ballast is available optionally for 150w lamp and supplied as standard for MH189, MH220 and MH300 integrally ballasted fixtures. Provide 90 C supply wire. Use separate conduit for wiring between fixture and ballast(s) for remote electronic ballast fixtures. 10-1/4" (260mm) 4-3/4" (121mm) 2-5/16" (59mm) 3-1/4" (83mm) 3-7/8" (98mm) 5-7/8" (149mm) 9-3/4" (248mm) 5-3/8" (86mm) 9-1/4" (234mm) 2-5/16" (59mm) 5/8" (16mm) 2-1/2" (64mm) 6-7/8" (178mm) 9-3/8" (238mm) 10-1/2" (264mm) 13-1/4" (337mm) 4-3/4" (121mm) 2-5/16" (59 mm) 2-3/8" (60mm) 3-7/8" (98mm) 6-5/8" (168mm) 10-5/8" (270mm) 9-1/2" (241mm) 13-1/8" (333mm) es - An electrostatically applied wet paint system utilizes a multi-stage process to provide a durable acrylic enamel finish. Suitable for indoor and outdoor applications. Surface Ceiling Mount INDOOR OUTDOOR 5-1/2" (140mm) 3-7/8" (98mm) 6-3/8" (162mm) 4-3/4" (121mm) 7-1/4" (184mm) Profile - : Anodized, extruded aluminum specular reflector with solid aluminum endcaps and stainless steel hardware. Type - profile with ; captive, extruded alum. hinge with non-gasketed Outdoor; captive, extruded alum. door with window cut-out and silicone gasketed Lens; patterned (wide distribution) tempered glass lens Mounting - Three standard mounts are fully adjustable and lockable. Designed for remote or integral ballast. Performance - Asymmetric distribution provides a concentration of light on target surface for smooth illumination. Maximum candlepower aimed 30 above nadir has less than 8% spill light within the 0-30 zone and less than 2% spill light within the 90-180 zone. Electrical - Electronic ballasts are provided standard for 39w and 70w lamps, CWA magnetic ballast for 150w lamp. Electronic ballast is available optionally for 150w lamp and supplied as standard for MH189, MH220 and MH300 integrally ballasted fixtures. Provide 90 C supply wire. Use separate conduit for wiring between fixture and ballast(s) for remote electronic ballast fixtures. es - An electrostatically applied wet paint system utilizes a multi-stage process to provide a durable acrylic enamel finish. Suitable for indoor and outdoor applications. 6-3/8" (162mm) 5-1/8" (130mm) 2-1/2" (64mm) 5/8" (16mm) 2-7/8" (73mm) 10-1/8" (257mm) 5-7/8" (149mm) 2-5/8" (67mm) 6-3/8" (162mm) 2-1/2" (64mm) 5/8" (16mm) 5-1/2" (140mm) 4-1/2" (114mm) 5-1/4" (133mm) 4-1/2" (114mm) 5-5/8" (143mm) 4-1/2" (114mm) 6-1/8" (156mm) 4-1/2" (114mm) *All profiles can be combined with the mounting styles shown. 5
HID Wall & Ceiling Semi-Recessed Wall Semi-Recessed INDOOR WINDIRECT TM (damp label) Code Basic P2 Solid P3 Perforated P4 Scalloped *P5 Short - SS - MH220-277V - SSRW - SGW - X - STD PROFILE LAMPING VOLTAGE MOUNTING FINISH OPTIONS CLASS P2 (solid) P3 (perforated) P4 (scalloped) P5 Note: *P5 (short visor) does not provide the same sightline shielding as the P2, P3 or P4 visors. Description LENGTH WEIGHT 14" (trim length) 6 lbs. SSRW - Wall SGW: Semi-Gloss Iridescent (gloss finish) to be SB: Straight Blade Baffle (external mount) PG: Patterned Glass (wide distribution) Special Option specifying a MH220 Report #: 12941 Ceiling Semi-Recessed INDOOR Basic P5 Short (Basic),, Universal (Basic),, Simple - SR - MH140-277V - SSRU - SGW - X - STD PROFILE LAMPING VOLTAGE MOUNTING FINISH OPTIONS CLASS P5 (damp label) Code Description Universal (Accessible or Inaccessible Ceilings) Simple (Accessible Ceilings Only) MOUNT LENGTH WEIGHT Universal 13 1/2" 6 lbs. Simple 12 3/4" 6 lbs. SSRU - Universal SSRS - Simple SGW: Semi-Gloss Iridescent (gloss finish) to be SB: Straight Blade Baffle (external mount) MP: Micro-Prismatic Lens (max. forward throw) Special Option HB: Hanger Bracket (see product text) specifying a MH150 Report #: 10953 6
WINDIRECT TM Wall Semi-Recessed INDOOR Wall & Ceiling Semi-Recessed HID SIZE APPLICATION LAMP 7-1/4" (184mm) SSRW: Semi-Recessed Wall Mount () 3-3/8" (86mm) WALL SURFACE 3-1/8" (79mm) 45 7" (178mm) Max CP.@115 Profile - : Anodized, extruded aluminum specular reflector with solid aluminum endcaps and stainless steel hardware. Type - profile with ; captive, extruded alum. hinge with non-gasketed Lens; micro-prismatic tempered glass lens Mounting - Adjustable and lockable yoke design with painted extruded alum. trim. Additional support may be required by local codes. Auxiliary mounting holes are provided. Performance - Asymmetric distribution provides a concentration of light on target surface for smooth illumination. Maximum candlepower aimed 115 above nadir has less than 8% spill light within the 0-115 zone and less than 2% spill light within the 180 270 zone. Electrical - Electronic ballasts are provided standard for 39w and 70w lamps, CWA magnetic ballast for 150w lamp. Electronic ballast is available optionally for 150w lamp and supplied as standard for MH189 and MH220 integrally ballasted fixtures. Use separate conduit for wiring between fixture and ballast(s) for remote electronic ballast fixtures. Use 90 C supply wire. es - An electrostatically applied wet paint system utilizes a multi-stage process to provide a durable acrylic enamel finish. Ceiling Semi-Recessed INDOOR SSRU: Universal Mount () * Accessible and Inaccessible Ceilings * 4-3/8" (111mm) SSRS: Simple Mount () * Accessible Ceilings Only * 2-7/8" (73mm) 3-7/8" (98mm) 2-5/8" (67mm) 2-7/8" (73mm) 4-5/8" (117mm) 6-3/4" (171mm) Max CP @ 30 Max CP @ 30 6-1/4" (159mm) 50 50 Supplemental wire support by others Drywall ceiling (1-3/4" thick max.) Supplemental wire support by others Reflector aiming adjustment above ceiling line. Lay-in ceiling (1-3/8" thick max.) Profile - : Anodized, extruded aluminum specular reflector with solid aluminum endcaps and stainless steel hardware. Type - profile with ; captive, extruded alum. hinge with non-gasketed Lens; patterned tempered glass lens Mounting - Universal; Adjustable and lockable yoke design with aiming adjustment below ceiling. Installation from above or below ceiling (accessible or inaccessible ceiling types). Additional support may be required by local codes. Auxiliary mounting holes are provided for hanger wire or threaded rods (by others). Simple; Adjustable and lockable features concealed above ceiling with painted steel trim. Installation from above ceiling only (accessible ceiling types only). Supplemental supports are required for accessible ceilings (either hanger wires or C-channels, not included). If hanger wire suspension is not possible, specify Hanger Bracket (HB) option to accept suspension bars (not provided). Performance - Asymmetric distribution provides a concentration of light on target surface for smooth illumination. Maximum candlepower aimed 30 above nadir has less than 8% spill light within the 0-30 zone and less than 2% spill light within the 90-180 zone. Electrical - Electronic ballasts are provided standard for 39w and 70w lamps, CWA magnetic ballast for 150w lamp. Electronic ballast is available optionally for 150w lamp. Use separate conduit for wiring between fixture and ballast(s) for remote electronic ballast fixtures. Use 90 C supply wire. es - An electrostatically applied wet paint system utilizes a multi-stage process to provide a durable acrylic enamel finish. 7
Pendant Pendant Deco Mount INDOOR WINDIRECT TM Basic P2 Solid P3 Perforated P4 Scalloped *P5 Short P3 - SS - MH300-120V - SM4 - SGW - X - STD PROFILE LAMPING VOLTAGE MOUNTING FINISH OPTIONS CLASS Code Description SGW: Semi-Gloss P2 (solid) P3 (perforated) P4 (scalloped) *P5 (damp Label) Note: *P5 (short visor) does not provide the same sightline shielding as the P2, P3 or P4 visors. MH300 (1)150w T6-G12 x (1)150w T6-G12 See page 9 for length and weight chart *Dual lamp configurations not available for SM3 & SM4 mounts. SM1: Single SM2: Twin *SM3: Triple *SM4: Quad Iridescent (gloss finish) to be SB: Straight Blade Baffle (external mount) PG: Pattern Glass Lens (wide distribution) Special Option only a MH300 Report #: 12741 Pendant Single & Twin Simple INDOOR P2, S Mount P2, SP2 Mount Basic P2 Solid P3 Perforated P4 Scalloped *P5 Short Note: *P5 (short visor) does not provide the same sightline shielding as the P2, P3 or P4 visors. P2 - SS - MH300-120V - S - SGW - X - STD PROFILE LAMPING VOLTAGE MOUNTING FINISH OPTIONS CLASS P2 (solid) P3 (perforated) (damp Label) Code Description MH300 (1)150w T6-G12 x (1)150w T6-G12 S: Single SGW: Semi-Gloss Iridescent (gloss finish) SB: Straight Blade Baffle(external mount) PG: Pattern Glass Lens (wide distribution) NT: Natatorium Construction Special Option specifying a P4 (scalloped) *P5 MOUNT LENGTH WEIGHT Single 12" 16 lbs. Twin 12" 23 lbs. SP2: Twin to be MH300 Report #: 12741 8
WINDIRECT TM Pendant Deco Mount INDOOR Profile - : Anodized, extruded aluminum specular reflector with solid aluminum endcaps and stainless steel hardware. Extruded aluminum visors are combined with basic profile to create P2, P3, P4 and P5 profiles. Type - profile with MOUNTING Max. PROFILE L 2 Weight SM1 9" 15 lbs. P2 P3 P4 13" 16 lbs. SM2 19 1 2" 20 lbs. P2 P3 P4 27 1 4" 22 lbs. SM3 24 3 4" 24 lbs. P2 P3 P4 32 1 2" 26 lbs. SM4 23 1 4" 27 lbs. P2 P3 P4 31" 30 lbs. SM1 SINGLE PENDANT SM2, SM3, SM4 MULTIPLE REFLECTOR PENDANT ; captive, extruded alum. hinge with non-gasketed Lens; micro prismatic tempered glass lens Mounting - Machined aluminum knuckle provides an adjustable and lockable connection between profile and aluminum centerbody. The centerbody is comprised Note: To specify modified overall drop, add drop dimension to end of mounting code; eg: SO4/42. Add MOD designation at end of catalog number.*all profiles can be combined with the mounting styles shown. of 1/8" thick aluminum fins welded to a 4" diameter cylinder. Pendant is hung by a single stem with round canopy. Performance - Asymmetric distribution provides a concentration of light on the target surface for smooth illumination. 11-5/8" 11-5/8" SM1 L 2 L 2 SIZE Electrical - Electronic ballasts are provided standard for 39w and 70w lamps, CWA magnetic ballast for 150w lamp. Electronic ballast is available optionally for 150w lamp and supplied as standard for MH189, MH220 and MH300 integrally ballasted fixtures. Provide 90 C supply wire. Use separate conduit for wiring between fixture and ballast(s) for remote electronic ballast fixtures. 11-5/8" L 2 APPLICATION Pendant LAMP es - An electrostatically applied wet paint system utilizes a multi-stage process to provide a durable acrylic enamel finish. SM2 SM3 SM4 L 2 11-5/8" ( Canopy/Stem Detail Canopy/Stem Detail 45 45 6" (152mm) Mounting Plate 6" (152mm) Mounting Plate SM1 Single Pendant SM3 Triple Pendant SM4 Quad Pendant SM2 Twin Pendant Pendant Single & Twin Simple INDOOR (762mm) 7" (174mm) 1" (25mm) Square Stem 1" (25mm) Square Stem 7" (174mm) (762mm) Profile - : Anodized, extruded aluminum specular reflector with solid aluminum endcaps and stainless steel hardware. Extruded aluminum visors are combined with basic profile to create P2, P3, P4 and P5 profiles. Type - profile with ; captive, extruded alum. hinge with non-gasketed Lens; micro prismatic tempered glass lens Mounting - Adjustable and lockable simple yoke mount with concealed mechanism. Rigid aluminum stem and mount plate is hidden with cover pan. Electrical - Electronic ballasts are provided standard for 39w and 70w lamps, CWA magnetic ballast for 150w lamp. Electronic ballast is available optionally for 150w lamp and supplied as standard for MH189, MH220 and MH300 integrally ballasted fixtures. Provide 90 C supply wire. Use separate conduit for wiring between fixture and ballast(s) for remote electronic ballast fixtures. es - An electrostatically applied wet paint system utilizes a multi-stage process to provide a durable acrylic enamel finish. 10-3/4" (273mm) 20" (508mm) Performance - Asymmetric distribution provides a concentration of light on the target surface for smooth illumination. 9
Cantilever & Base Mount Cantilever Wall INDOOR OUTDOOR WINDIRECT TM Basic P5 Short - SS - MH140-120V - SC1 - SGW - X - STD PROFILE LAMPING VOLTAGE MOUNTING FINISH OPTIONS CLASS Code Description SGW: Semi-Gloss P2 (solid) P3 (perforated) P4 (scalloped) P5 (damp label) Outdoor (wet label) SSW: Wet MH300 (1)150w T6-G12 x (1)150w T6-G12 LENGTH WEIGHT 12" 16 lbs. SC1: Cantilever Iridescent (gloss finish) to be MP: Micro-Prismatic Lens (max. forward throw) SB: Straight Blade Baffle (external mount) Special Options specifying a MH150 Report #: 10953 Base Mount INDOOR OUTDOOR Basic SB4: Mount (Integral Ballast) - SSW - MH220-277V - SB4 - SGW - X - STD PROFILE LAMPING VOLTAGE MOUNTING FINISH OPTIONS CLASS (damp label) Outdoor (wet label) SSW: Wet Code Description Integral Ballast MH300 (1)150w T6-G12 x (1)150w T6-G12 LENGTH WEIGHT 16" 20 lbs. Integral Ballast SB4 Base SGW: Semi-Gloss MP: Micro Prismatic Glass Lens (max. forward throw) Iridescent (gloss finish) to be SB: Straight Blade Baffle (external mount) MP: Micro Prismatic Lens (max. forward throw) Special Option specifying a MH150 Report #: 10953 10
WINDIRECT TM Cantilever Mount INDOOR OUTDOOR SC1: Mount () Cantilever & Base Mount HID SIZE APPLICATION LAMP 9-15/16" (252mm) 7" (178mm) 7-3/16" (198mm) (762mm) Profile - : Anodized, extruded aluminum specular reflector with solid aluminum endcaps and stainless steel hardware. Extruded aluminum visor can be combined with basic profile to create P5 profile. Type - profile with ; captive, extruded alum. hinge with non-gasketed Outdoor; captive, extruded alum. door with window cutout for regressed lens and silicone gasket. Lens; patterned glass (wide distribution) lens Mounting - Adjustable and lockable simple yoke mount with concealed mechanism. Rigid aluminum stem and mount plate is hidden with cover pan. Performance - Asymmetric distribution provides a concentration of light on the target surface for smooth illumination. Electrical - Electronic ballasts are provided standard for 39w and 70w lamps, CWA magnetic ballast for 150w lamp. Electronic ballast is available optionally for 150w lamp and supplied as standard for MH189, MH220 and MH300 integrally ballasted fixtures. Provide 90 C supply wire. Use separate conduit for wiring between fixture and ballast(s) for remote electronic ballast fixtures. es - An electrostatically applied wet paint system utilizes a multi-stage process to provide a durable acrylic enamel finish. Base Mount INDOOR OUTDOOR SB4: Mount (Integral Ballast) Profile: Type: SS, SR, SSW, SRW Mount: SB4 Length: Refer to chart below Max CP.@ 150 Max CP.@ 150 6-1/4" (159mm) 6-1/4" (159mm) 10-3/8" (264mm) 10-3/8" (264mm) 17-3/8" (441mm) 17-3/8" (441mm) 16-5/8" (422mm) 16-5/8" (422mm) 4" (102mm) 4" (102mm) 9-3/4" (248mm) 9-3/4" (248mm) Profile - : Anodized, extruded aluminum specular reflector with solid aluminum endcaps and stainless steel hardware. Type - profile with Captive extruded aluminum door with window cut-out for regressed lens and silicone gasket. Mounting - Integral ballast, UL rated for indoor or outdoor wet location. Fully adjustable arms may be adjusted from 0-90. Mount only above ground. Performance - Asymmetric distribution provides a concentration of light on target surface for smooth illumination. Maximum candlepower aimed 150 above nadir has less than 8% spill light within the 0-150 zone and less than 2% spill light within the 150-270 zone. Electrical - Electronic ballasts are provided standard for 39w and 70w lamps, CWA magnetic ballast for 150w lamp. Electronic ballast is available optionally for 150w lamp and supplied as standard for MH189, MH220 and MH300 fixtures. Provide 90 C supply wire. es - An electrostatically applied automotive wet paint system utilizes a multi-stage process to provide a durable acrylic enamel finish. 3-1/4" (83mm) 3-1/4" (83mm) 11
Windirect is one of four distinctive product groups from Winona Lighting. All Winona Lighting products are built with the highest quality materials and finishes in the industry. Look for our other catalogs or visit our website for more information at: WINDIRECT TM Windirect High Performance Asymmetric Lighting is the complete solution for indirect lighting projects of any size. Built around lamps ranging from T-3 Halogen to T-5 Fluorescent to BT-37 Pulse Start Metal Halide, there is a WIndirect luminaire for any application. This extensive line of Decorative Standard Products includes Pendants, Ceiling Mounts, Wall Mounts and Exterior luminaires. All Standard luminaires are designed with modification in mind, making it easy to create an individual design for your project. If a custom design is required, our Decorative Custom capabilities are unmatched in the industry. Winscape features our line of high performance, specificationgrade, indoor and outdoor low-voltage and line-voltage architectural and landscape luminaires. Machined from solid billets of aluminum, brass and stainless steel, our luminaires are made to beautifully survive a lifetime of use. Winona LED is proud to introduce three exciting new LED products: POPS!, Step Lights and V-Line Linear LED. It is Winona LED s mission to be the leader in the development of LED based products in forms that the industry recognizes. Our vision is to provide one place to find LED products for virtually any architectural lighting requirement. Winona Lighting on the web...start at For complete information from all of Winona Lighting s Product Divisions visit our website at Full Catalogs New Products Photometric Information Create-A-Spec Installation Information All information is fully downloadable All rights reserved 2007 copyright