DEUTSCHE NORM March 2001 Hexagon head bolts Product grade C (ISO 4016 : 1999) English version of DIN EN ISO 4016 { EN ISO 4016 ICS 21.060.10 Sechskantschrauben mit Schaft Produktklasse C (ISO 4016 : 1999) Supersedes DIN EN 24016, February 1992 edition. European Standard has the status of a DIN Standard. A comma is used as the decimal marker. National foreword This standard has been published in accordance with a decision taken by CEN/TC 185 to adopt, without alteration, International Standard ISO 4016 as a European Standard. The responsible German body involved in its preparation was the Normenausschuss Mechanische Verbindungselemente (Fasteners Standards Committee), Technical Committee Schrauben und Muttern mit Außenantrieb. The DIN Standards corresponding to the International Standards referred to in clause 2 and in the bibliography of the EN are as follows: ISO Standard DIN Standard ISO 225 DIN EN 20225 ISO 724 DIN ISO 724 ISO 898-1 DIN EN ISO 898-1 ISO 3269 DIN EN ISO 3269 ISO 4018 DIN EN ISO 4018 ISO 4042 DIN EN ISO 4042 ISO/DIS 4759-1 DIN EN ISO 4759-1*) ISO 8992 DIN ISO 8992 Amendments DIN EN 24016, February 1992 edition, has been superseded by the specifications of EN ISO 4016, which is identical to ISO 4016. *) Currently at draft stage. Continued overleaf. EN comprises 11 pages. No part of this standard may be reproduced without the prior permission of DIN Deutsches Institut für Normung e.v., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, has the exclusive right of sale for German Standards (DIN-Normen). Ref. No. DIN EN ISO 4016 : 2001-03 English price group 09 Sales No. 1109 07.01
Page 2 DIN EN ISO 4016 : 2001-03 Previous editions Supplement to DIN 556: 1926-10; DIN 556: 1923-02, 1925-04, 1936-04; Supplement 1 to DIN 601-1: 1942-11; DIN 601-1: 1941-01, 1951-09, 1963-03; DIN 602: 1925-07, 1936-07; DIN 601: 1925-07, 1934-07, 1967-12, 1970-11, 1983-12, 1984-06; DIN EN 24016: 1992-02. National Annex NA Standards referred to (and not included in Normative references and Bibliography) DIN EN 20225 Bolts, screws, studs and nuts Symbols and designations for dimensioning (ISO 225 : 1983) DIN EN ISO 898-1 Mechanical properties of fasteners made of carbon steel and alloy steel Part 1: Bolts, screws and studs (ISO 898-1 : 1999) DIN EN ISO 3269 Fasteners Acceptance inspection (ISO 3269 : 2000) DIN EN ISO 4018 Hexagon head screws Product grade C (ISO 4018 : 1999) DIN EN ISO 4042 Fasteners Electroplated coatings (ISO 4042 : 1999) DIN ISO 724 ISO general purpose metric screw threads Basic dimensions (ISO 724 : 1993)
EN ISO 4016 November 2000 ICS 21.060.10 Supersedes EN 24016 : 1991. English version Hexagon head bolts Product grade C (ISO 4016 : 1999) Vis à tête hexagonale partiellement filetées Grade C (ISO 4016 : 1999) Sechskantschrauben mit Schaft Produktklasse C (ISO 4016 : 1999) This European Standard was approved by CEN on 2000-10-26. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom. ÈÉË European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 2000. CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national members. Ref. No. E
Page 2 Foreword International Standard ISO 4016 : 1999 Hexagon head bolts Product grade C, which was prepared by ISO/TC 2 Fasteners of the International Organization for Standardization, has been adopted by Technical Committee CEN/TC 185 Threaded and non-threaded mechanical fasteners and accessories, the Secretariat of which is held by DIN, as a European Standard. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, and conflicting national standards withdrawn, by May 2001 at the latest. In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom. Endorsement notice The text of the International Standard ISO 4016 : 1999 was approved by CEN as a European Standard without any modification.
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11