DEUTSCHE NORM January 2001 Fasteners Electroplated coatings (ISO 4042 : 1999) English version of DIN EN ISO 4042 { EN ISO 4042 ICS 21.060.01; 25.220.40 Verbindungselemente Galvanische Überzüge (ISO 4042 : 1999) Supersedes October 1999 edition. European Standard has the status of a DIN Standard. A comma is used as the decimal marker. National foreword This standard has been published in accordance with a decision taken by CEN/TC 185 to adopt, without alteration, International Standard ISO 4042 as a European Standard. The responsible German body involved in its preparation was the Normenausschuss Mechanische Verbindungselemente (Fasteners Standards Committee), Technical Committee Oberflächenschutz. DIN EN ISO 3269 and DIN EN ISO 15330 *) are the standards corresponding to International Standards ISO 3269 and ISO 15330, respectively, referred to in clause 2 of the EN. Amendments This standard differs from the October 1999 edition in that a printing error in the German version has been corrected. Previous editions DIN ISO 4042: 1992-06; DIN EN ISO 4042: 1999-10. National Annex NA Standards referred to (and not included in Normative references, Bibliography and Annex ZA) DIN EN ISO 3269 Fasteners Acceptance inspection (ISO 3269 : 2000) DIN EN ISO 15330 Fasteners Preloading test for the detection of hydrogen embrittlement Parallel bearing surface method (ISO/DIS 15330 : 1997)*) *) Currently at draft stage. EN comprises 23 pages. No part of this standard may be reproduced without the prior permission of DIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, has the exclusive right of sale for German Standards (DIN-Normen). Ref. No. DIN EN ISO 4042 : 2001-01 English price group 13 Sales No. 1113 05.01
EN ISO 4042 June 1999 ICS 21.060.10 English version Fasteners Electroplated coatings (ISO 4042 : 1999) Eléments de fixation Revêtements électrolytiques (ISO 4042 : 1999) Verbindungselemente Galvanische Überzüge (ISO 4042 : 1999) This European Standard was approved by CEN on 1999-05-26. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom. ÈÉË European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1999. CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national members. Ref. No. E
Page 2 Foreword International Standard ISO 4042 : 1999 Fasteners Electroplated coatings, which was prepared by ISO/TC 2 Fasteners of the International Organization for Standardization, has been adopted by Technical Committee CEN/TC 185 Threaded and non-threaded mechanical fasteners and accessories, the Secretariat of which is held by DIN, as a European Standard. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, and conflicting national standards withdrawn, by December 1999 at the latest. In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom. Endorsement notice The text of the International Standard ISO 4042 : 1999 was approved by CEN as a European Standard without any modification. NOTE: Normative references to international publications are listed in Annex ZA (normative). 3 3 4 5 5 5 5 5 6 6 6 7 7 9 9 9 9 9 10 12 14 15 18 20 21 23
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 16
Page 17
Page 18
Page 19
Page 20
Page 21
Page 22
Page 23