H D CONTENTS HDPE-1. July, 2017 HDPE

CONTENTS July, 2017 PROUCTS FOR...2 FASTP ALL STAINLESS STEEL TAPPING SLEEVE...3 FTSSP ALL STAINLESS STEEL TAPPING SLEEVE...4 FTSP AN FTSCP STEEL TAPPING SLEEVES...5 MECANICAL JOINT AAPTER OUTLET...6 FCP202 IRON SERVICE SALES...7 FS(P)313, FS(P)323, FSP333, FSP343 STAINLESS STEEL SALES...8 FSP1 ALL STAINLESS REPAIR CLAMPS...9 FSP2, FSP3 ALL STAINLESS REPAIR CLAMPS...10 FP1, FP2 FLEX REPAIR CLAMPS... 11 FP3 FLEX REPAIR CLAMPS...12 FC1, FC1-L12 UCTILE IRON COUPLINGS...13 FC2A TRANSITION COUPLINGS...14 FC2A-L12 TRANSITION COUPLINGS...15 FC2W, FC2W-L12 ULTRA-FLEX WIE RANGE COUPLINGS...16 EN CAP FOR ULTRA-FLEX WIE RANGE COUPLINGS...17 FC2W-EC ULTRA-FLEX LONG SLEEVE WIE RANGE COUPLINGS...17 FRC IRON REUCING COUPLINGS...17 FFCA IRON FLANGE COUPLING AAPTERS, FEC EN CAP COUPLINGS...18 MJFA FLANGE AAPTER, MJFA FLANGE AAPTER W/ FLANGE BOLT...19 FRR CUT-IN COUPLINGS...19 FC23 STEEL TRANSITION COUPLING...20-22 FC3 STANAR STEEL COUPLINGS...23 FC4 STANAR STEEL COUPLINGS...24-25 FC4 STEEL COUPLINGS W/EN CAP...26 FC5 STEEL TRANSITION COUPLINGS...27 FC6 STEEL REUCING COUPLINGS...28 FCA STEEL FLANGE COUPLING AAPTERS...29-30 RFAP RESTRAINE FLANGE AAPTERS...31-32 UFA900 AAPTER FLANGE...32 FABRICATE RESTRAINE COUPLING...33-34 RCPP FOR PI RCP FOR JOINING UCTILE IRON PI TO PI UFR1300 RESTRAINERS...35 UFR1500 RETAINER GLAN JOINT RESTRAINT...36 UFR1500-CA RETAINER GLAN WIT ACCESSORIES (MJ GASKET)...37 UFR1500-SA RETAINER GLAN WIT ACCESSORIES (TRANSITION GASKET)...38 UFR1500-ZA RETAINER GLAN WIT ACCESSORIES (SO-EZ GASKET)...39 INSERT STIFFENERS FOR PI...40-1

July, 2017-2 FOR METER BOX PROUCTS FOR PI igh ensity Polyethylene () pipe is much more flexible than PVC pipe and expands and contracts with temperature and pressure variations. The expansion/contraction of the pipe is due to the high coefficient of thermal expansion (from AWWA M23, PVC Pipe esign and Installation). Because the water and ambient temperature affect the diameter of the pipe, our products are recommended to be used in underground applications where the water temperature flowing through the pipe remains between 55º F and 85º F. BRASS - COMPRESSION PROUCTS Ford brass compression fittings (properly sized) will fit 1/2", 3/, 1", 1-1/, 1-1/2" and 2". If properly installed according to the Ford Meter Box instructions, and maintained under normal waterworks service conditions, Ford compression fittings are suitable and recommended for pipe with a wall thickness no less than R11 and with the use of properly sized insert stiffeners. Proper installation also includes, but is not limited to, a smooth and supportive trench bed, a proper backfill material and a proper backfill procedure to minimize pipe deflection. Ford offers insert stiffeners for 1/2" through 3 that are manufactured in accordance with ANSI/AWWA C906. BELLEVILLE WASERS Belleville Washers, also referred to as spring washers, are used on repair clamps, tapping sleeves and some saddles when installed on pipe to address outside diameter Belleville Washer Installation variations when the pipe expands and contracts, promoting consistent force on the gasket. The Belleville washers are made of 17-7 P stainless steel. epending on the pipe size and recommended installation torque, Belleville washers are used singularly, or in a stack, to allow for more expansion/contraction of the pipe diameter. uring initial installation, the Belleville washer(s) will compress. If the pipe diameter expands, the washer(s) will continue compressing. As the pipe diameter constricts, the washer(s) will decompress (or spring back) to a cupped shape, keeping consistent force on the components to maintain the gasket compression. INSERTS Inserts, or pipe stiffeners, are required when restraints or couplings are installed on pipe. The force exerted by restraints and couplings on the pipe wall can cause the pipe diameter to constrict, which could allow restraint and sealing issues. Because restraints and couplings are generally installed closer to the ends of pipe, the pipe could also toe-in, which makes creating a seal difficult, if not impossible, because the pipe is pushed away from the gasket. An insert supports the pipe wall, allowing the restraint or coupling to perform properly. Both styles (wedge and solid) are acceptable for use with our products. Inserts should be installed according to the manufacturer s instructions. 1 Washer Stack 3 Washer Stack 2 Washer Stack 4 Washer Stack NOTE: All Ford products identified for use on pipe have been tested to ensure they will be watertight at pressures up to the rated pressure of the pipe. Ford has no opinion as to the suitability of its products, or of their effect on pipe over the service lifetime of the pipe. Please consult the manufacturer of the pipe concerning its long term performance. Only products specifically identified for use on should be used on. CAUTION: Products that are not recommended for pipe should not be used on. CATALOG SECTION AA FASTP Tapping Sleeve FTSP and FTSCP Tapping Sleeve FTSSP Tapping Sleeve FCP202 Saddle *FS313 & FS323 (12" & under) CATALOG SECTION L FSP Repair Clamp FP Repair Clamp FSP3x3 Saddle Notes: 1) Most Products in catalog sections AA and L require a specific catalog number to ensure that Belleville washers are included and products are sized to the correct pipe diameter. 2) Tapping sleeves and repair clamps for are sized differently from standard products. 3) FSP-style repair clamps are recommended over FP-clamps. 4) The FASTP tapping sleeve is recommended for 12" and smaller nominal sized tapping sleeves. Caution: Ford Meter Box does not recommend size-on-size tapping sleeves for. Nut Spring Washers Flat Washer SUMMARY OF FOR METER BOX PROUCTS APPROVE FOR : LISTE WITIN CATALOG SECTIONS A, B, C, E, F, FA, G,, I, AN J Note: Ford brass compression fittings are available to fit 1/2", 3/, 1", 1-1/, 1-1/2" and 2". These compression fittings are suitable and recommended for pipe with a wall thickness no less than R11 and with the use of properly sized insert stiffeners, listed in price book. SCIFIC PI PROUCTS TAT REQUIRE / INCLUE BELLEVILLE WASERS: *Sizes 12" and under are approved for pipe without Belleville Washers. SCIFIC PI PROUCTS TAT O NOT REQUIRE BELLEVILLE WASERS, BUT O REQUIRE PRORLY SIZE INSERT STIFFENERS: CATALOG SECTION M AN N All couplings CATALOG SECTION U RFAP Restrained Flange Adapter UFA900 Flange Adapter UFR1300 Restraint UFR1500 Restraint Note: Flat washers not included / needed on some pipe products Notes: 1) Products in catalog sections M, N and U require the use of specifically sized inserts suitable in diameter, length and strength to fully support the pipe. 2) See page -40 for Ford Meter Box's offering of insert stiffeners.

July, 2017 FOR ALL STAINLESS TAPPING SLEEVE FOR PI STYLE FASTP TAPPING SLEEVE WIT STAINLESS STEEL OR CARBON STEEL FLANGE For mechanical joint outlet (replaces fl ange outlet) option, see page -6. 10" 12" 1 1 1 20" 2 O.. R 4.50 4.80 6.63 6.90 8.63 9.05 10.75 11.10 12.75 13.20 14.00 15.30 16.00 17.40 18.00 19.50 20.00 21.60 24.00 25.80 FASTP-450- FASTP-480- FASTP-663- FASTP-690- FASTP-863- FASTP-905- FASTP-1075- FASTP-1110- FASTP-1275- FASTP-1320- FASTP-1400- FASTP-1530- FASTP-1600- FASTP-1740- FASTP-1800- FASTP-1950- FASTP-2000- FASTP-2160- FASTP-2420- FASTP-2580- B F C O C F C W. L. 3 $ 929.65 3A $ 706.20 38 4 966.97 4A 732.02 42 4 6 4 6 8 4 6 8 10 4 6 8 10 12 4 6 8 10 12 4 6 8 10 12 4 6 8 10 12 4 6 8 10 999.63 1106.87 1125.69 1215.06 1561.00 1315.80 1438.85 1765.22 3044.78 2112.61 2277.92 2870.92 3825.63 4444.22 2150.31 2316.08 2760.14 4266.28 4905.93 2273.86 2439.95 2933.23 4705.79 5404.43 3210.13 3375.96 4106.14 5183.26 5881.86 3321.91 3487.62 4229.97 5318.90 12 6021.21 12A 4722.84 178 To Order: Select the catalog sleeve number for the desired range and complete the catalog number by adding the flange code. Example: The catalog number for use on a pipe (6.90 O..) with a stainless steel flange is FASTP-690-4. Note: Tapping sleeves are assembled with Belleville Spring Tensioning Washers. 4A 6A 4A 6A 8A 4A 6A 8A 10A 4A 6A 8A 10A 12A 4A 6A 8A 10A 12A 4A 6A 8A 10A 12A 4A 6A 8A 10A 12A 4A 6A 8A 10A 742.19 786.50 857.60 915.58 1136.50 946.19 1010.90 1211.45 2263.72 1761.03 1811.52 2244.05 2961.23 3208.77 1779.24 1829.70 2126.27 3387.44 3662.69 1900.11 1950.69 2294.42 3820.78 4154.73 2813.51 2864.68 3437.68 4263.19 4597.38 2917.76 2968.10 3552.45 4388.74 42 49 47 53 79 50 55 86 104 75 82 102 114 146 78 84 104 114 150 84 90 112 120 160 86 92 114 123 162 97 103 127 136-3

July, 2017 FOR ALL STAINLESS TAPPING SLEEVE FOR PI WIT REMOVABLE BOLTS STYLE FTSSP TAPPING SLEEVE WIT STAINLESS STEEL OR CARBON STEEL FLANGE For mechanical joint outlet (replaces fl ange outlet) option, see page -6. 10" 12" 1 1 1 20" 2 O.. R 4.50 4.80 6.63 6.90 8.63 9.05 10.75 11.10 12.75 13.20 14.00 15.30 16.00 17.40 18.00 19.50 20.00 21.60 24.00 25.80 FTSSP-450- FTSSP-480- FTSSP-663- FTSSP-690- FTSSP-863- FTSSP-905- FTSSP-1075- FTSSP-1110- FTSSP-1275- FTSSP-1320- FTSSP-1400- FTSSP-1530- FTSSP-1600- FTSSP-1740- FTSSP-1800- FTSSP-1950- FTSSP-2000- FTSSP-2160- FTSSP-2400- FTSSP-2580- F C 30"-3 Contact factory for information. Please indicate which tapping valve is being used. 42"-4 To Order: Select the catalog sleeve number for the desired range and complete the catalog number by adding the flange code. Example: The complete FTSSP catalog number for use on a pipe (6.90 O..) with a stainless steel flange is FTSSP-690-4. Note: Tapping sleeves are assembled with Belleville Spring Tensioning Washers. O C F C W. L. 3 $ 972.97 3A $ 799.21 38 4 972.97 4A 839.62 42 4 6 4 6 8 4 6 8 10 4 6 8 10 12 4 6 8 10 12 14 4 6 8 10 12 14 16 4 6 8 10 12 14 16 18 4 6 8 10 12 14 16 18 20 996.25 1074.24 1185.17 1194.73 1583.40 1233.20 1256.59 1732.34 2627.09 1649.28 1822.54 2245.15 2651.18 2979.88 1834.70 1844.68 2316.55 2676.67 3176.57 P.O.A. 2052.53 2107.92 2748.46 3047.92 3635.94 P.O.A. P.O.A. 2060.03 2119.15 2792.27 3097.12 3690.99 P.O.A. P.O.A. P.O.A. 2152.90 2296.74 2891.57 3225.18 3945.90 P.O.A. P.O.A. P.O.A. P.O.A. 4A 6A 4A 6A 8A 4A 6A 8A 10A 4A 6A 8A 10A 12A 4A 6A 8A 10A 12A 14A 4A 6A 8A 10A 12A 14A 16A 4A 6A 8A 10A 12A 14A 16A 18A 4A 6A 8A 10A 12A 14A 16A 18A 20A 870.79 943.72 1012.61 1016.66 1408.05 1153.34 1178.12 1538.99 2297.32 1563.94 1668.49 1963.30 2372.61 2939.52 1668.49 1809.36 2078.15 2457.44 3083.43 P.O.A. 1982.13 2044.91 2474.67 2857.07 3519.46 P.O.A. P.O.A. 2032.99 2100.88 2521.53 2941.48 3610.03 P.O.A. P.O.A. P.O.A. 2075.58 2168.60 2552.96 3016.25 3645.37 P.O.A. P.O.A. P.O.A. P.O.A. 42 49 47 53 79 50 55 86 104 75 82 102 110 146 78 84 104 114 150 188 84 90 112 120 160 190 200 86 92 114 123 162 195 205 215 97 103 127 136 178 199 210 224 230-4

FOR STEEL TAPPING SLEEVES FOR PI STYLE FTSP AN FTSCP TAPPING SLEEVES July, 2017 For mechanical joint outlet (replaces fl ange outlet) option, see page -6. 10" 12" 1 1 1 20" 2 30" O.. R 4.50 4.80 6.63 6.90 8.63 9.05 10.75 11.10 12.75 13.20 14.00 15.30 16.00 17.40 18.00 19.50 20.00 21.60 24.00 25.80 30.00 32.00 FTSP-663- FTSP-690- E C FTSP-450- FTSP-480- FTSCP-450- FTSCP-480- FTSCP-663- FTSCP-690- FTSP-863- FTSP-905- FTSCP-863- FTSCP-905- FTSP-1075- FTSP-1110- FTSCP-1075- FTSCP-1110- FTSP-1275- FTSP-1320- FTSCP-1275- FTSCP-1320- FTSP-1400- FTSP-1530- FTSCP-1400- FTSCP-1530- FTSP-1600- FTSP-1740- FTSCP-1600- FTSCP-1740- FTSP-1800- FTSP-1950- FTSCP-1800- FTSCP-1950- FTSP-2000- FTSP-2160- FTSCP-2000- FTSCP-2160- FTSP-2400- FTSP-2580- FTSCP-2400- FTSCP-2580- FTSP-3000- FTSP-3200- FTSCP-3000- FTSCP-3200- B F C W. L. L A B List Price To Order: Select the catalog sleeve number for the desired range and complete the catalog number by adding the flange code. Example: The catalog number for use on a pipe (6.90 O..) with standard coating and a flange is FTSP-690-4. Note: Tapping sleeves are assembled with Belleville Spring Tensioning Washers. Option: -S standard FTSP with stainless steel bolts; add -S" to the catalog number. Example: FTSP-690-4-S -A standard FTSCP with low alloy bolts; add -A" to the catalog number. Example: FTSCP-690-4-A Note: A 1" undersized cutter is required for flanges 1 and larger. Oversized outlets are available by special request P.O.A. FTSP O S.S. B -S B FTSCP O L A B -A 3 41 $ 670.51 $ 778.83 $ 841.58 $ 782.44 4 65 631.64 739.91 820.49 761.31 4 73 652.61 760.90 832.84 773.70 6 79 746.34 854.63 967.39 908.25 4 82 809.46 917.75 1025.24 966.11 6 87 939.67 1047.93 1170.47 1111.33 8 117 1135.92 1280.31 1414.33 1335.51 4 93 872.82 974.06 1066.80 1007.66 6 98 928.77 1030.02 1158.84 1099.71 8 130 1125.48 1260.47 1431.71 1352.88 10 169 1355.76 1524.51 1726.29 1627.77 4 99 950.76 1042.80 1176.06 1116.93 6 105 1033.13 1134.91 1265.76 1206.63 8 139 1322.57 1434.01 1625.45 1546.64 10 178 1550.99 1731.53 2056.73 1958.21 12 230 1860.01 2077.43 2347.64 2229.41 4 99 930.33 1116.51 1209.99 1150.85 6 105 1069.47 1168.80 1306.92 1247.79 8 139 1341.94 1545.39 1686.03 1607.20 10 178 1645.78 1826.29 2194.68 2096.16 12 230 1904.93 2122.37 2454.27 2336.04 4 114 1138.92 1327.91 1371.54 1312.41 6 120 1238.29 1405.48 1478.17 1419.03 8 159 1600.95 1747.91 1913.56 1834.75 10 203 1881.85 2062.35 2465.58 2367.06 12 256 2173.42 2390.87 2781.87 2663.64 4 114 1201.96 1354.62 1463.64 1404.50 6 120 1318.26 1461.21 1582.37 1523.24 8 159 1668.09 1812.51 2051.69 1972.88 10 203 1954.10 2147.75 2617.73 2519.21 12 256 2248.82 2466.33 2973.34 2855.11 4 122 1255.21 1364.29 1504.86 1445.72 6 128 1369.12 1480.61 1635.69 1576.55 8 170 1717.47 1861.89 2136.49 2057.67 10 216 2007.08 2187.63 2651.85 2553.33 12 273 2302.91 2520.40 3054.75 2936.52 16 412 3249.31 3575.92 3999.75 3842.12 4 122 1340.05 1485.48 1613.87 1372.06 6 128 1480.61 1609.17 1754.43 1695.30 8 170 1777.63 1922.06 2301.25 2222.44 10 216 2085.05 2265.54 2785.48 2686.96 12 273 2369.89 2587.35 3226.57 3108.35 16 412 3332.05 3657.66 4161.42 4003.79-5

July, 2017 MECANICAL JOINT AAPTER OUTLET OPTION FOR FOR TAPPING SLEEVES (patent pending) A special mechanical joint outlet is available as an option on Ford Tapping Sleeves. This special outlet will attach to a mechanical joint valve. Mechanical Joint Outlet Option Shown on a FASTP Style Tapping Sleeve. To order a Ford Tapping Sleeve with this option, add "-MJ" to the end of the part number. Example: The catalog number for a FASTP Tapping Sleeve with a carbon steel mechanical joint outlet is FASTP-663-4A-MJ or FASTP-690-4A-MJ. Please add the following to the list price when ordering the mechanial joint outlet option. This price adder is the same for any type of tapping sleeve having a listed outlet size. -MJ O -MJ A 3" $ 37.80 37.80 42.80 60.65 10" 71.76 12" 130.38 *1 P.O.A. *1 P.O.A. *1 P.O.A. *20" P.O.A. *2 P.O.A. * These outlet sizes not available on the FASTP style. -6

FOR IRON SERVICE SALES STYLE FCP202 FOR, SR'S 9 TROUG 17 OUBLE WIE BAN SALES FOR 3/ TROUG 2" TAPS July, 2017 STYLE FCP202 OUBLE WIE BAN SALES (epoxy coated with stainless steel band and bolts) O.. 3/ 1" T C. Q. 1-1/ - 2-1/2" T C. Q. W. L. *4.50 FCP202-450-Tap 4.80 FCP202-480-Tap $ 120.23 6 $ 130.58 6 5.4 6.63 FCP202-663-Tap 6.90 FCP202-690-Tap 136.07 4 145.10 4 6.8 8.63 FCP202-863-Tap 9.05 FCP202-905-Tap 156.30 3 166.19 5 8.2 10" 10.75 FCP202-1075-Tap 11.10 FCP202-1110-Tap 201.84 3 215.86 3 11.5 12" 12.75 FCP202-1275-Tap 13.20 FCP202-1320-Tap 208.23 3 228.85 3 12.5 Note: Saddles are assembled with Belleville Spring Tensioning Washers under the saddle nuts. * Saddles for this pipe O.. are not available with 2" CC (CC7) or 2-1/2" IP (IPS) threads. IMPORTE - STYLE STYLE FCP202 OUBLE WIE BAN SALES (epoxy coated with stainless steel band and bolts) C. C. O.. Q. Q. W. L. 3/ 1" T 1-1/ - 2-1/2" T *4.50 FCP202-450-Tap-I 4.80 FCP202-480-Tap-I $ 97.87 6 $ 125.61 6 5.4 6.63 FCP202-663-Tap-I 6.90 FCP202-690-Tap-I 109.23 4 129.51 4 6.8 8.63 FCP202-863-Tap-I 9.05 FCP202-905-Tap-I 123.95 3 149.25 5 8.2 10" 10.75 FCP202-1075-Tap-I 11.10 FCP202-1110-Tap-I 167.54 3 198.88 3 11.5 12" 12.75 FCP202-1275-Tap-I 13.20 FCP202-1320-Tap-I 188.95 3 209.08 3 12.5 Note: Saddles are assembled with Belleville Spring Tensioning Washers under the saddle nuts. * Saddles for this pipe O.. are not available with 2" CC (CC7) or 2-1/2" IP (IPS) threads. OUTLET TREA TAP COE CC (AWWA) T FIP T T C N. T C N. 3/ CC CC3 3/ IP IP3 1" CC CC4 1" IP IP4 1-1/ CC CC5 1-1/ IP IP5 1-1/2" CC CC6 1-1/2" IP IP6 2" CC CC7 2" IP IP7-7

July, 2017 STAINLESS STEEL SALES FOR PI (Belleville washers required above 12") FSP313 SINGLE BAN (with Belleville washers) O.. R B B W W N. 1/2"- 1-1/- 1/2"-1" 1-1/-2" 1/2"-1" T 1-1/-2" T 1" T 2" T FSP313-238-Tap 2.38 1/2" 1 - $ 72.92 1.9 - - FSP313W-238-Tap 2.38 1/2" 1-91.56 FSP313-350-Tap 3.50 1/2" 1-76.05 2.2 - FSP313W-350-Tap 3.50 1/2" 1-94.69 - FSP313-396-Tap 3.96 1/2" 1-76.05 - - FSP313W-396-Tap 3.96 1/2" 1-94.69 FSP313-450-Tap 4.50 1/2" 1 7-1/2" - 91.85 FSP313-480-Tap 4.50-4.80 1/2" 1 7-1/2" $ 171.55 3.3 3.9 FSP313-663-Tap 6.63 FSP313-690-Tap 6.90 5/ 1 7-1/2" 126.70 176.23 4.7 5.1 FSP313-863-Tap 8.63 FSP313-905-Tap 9.05 5/ 1 7-1/2" 128.37 181.94 5.2 5.8 FSP313-1075-Tap 10.75 FSP313-1110-Tap 11.10 5/ 1 7-1/2" 165.02 203.47 5.8 8.7 FSP313-1275-Tap 12.75 FSP313-1320-Tap 13.20 5/ 1 7-1/2" 168.27 213.00 6.4 9.3 FS313 SINGLE BAN O.. R B B W W N. 1/2"- 1-1/- 1/2"-1" 1-1/-2" 1/2"-1" T 1-1/-2" T 1" T 2" T FS313-213-Tap 2.13 1/2" 1" - $ 67.44 FS313W-213-Tap 2.13 1/2" 1" - 73.17 2" FS313-238-Tap 2.38 1/2" 1-67.44 FS313W-238-Tap 2.38 1/2" 1-73.17-1.9 - FS313-270-Tap 2.50-2.70 1/2" 1-67.44 FS313W-270-Tap 2.50-2.70 1/2" 1-73.17 2-1/2" FS313-288-Tap 2.88 1/2" 1-68.96 FS313W-288-Tap 2.88 1/2" 1-73.17-1.9 - FS313-350-Tap 3.50 1/2" 1-70.57 3" FS313W-350-Tap 3.50 1/2" 1-73.17 FS313-410-Tap 3.90-4.10 1/2" 1-70.57-2.2 - FS313W-410-Tap 3.90-4.10 1/2" 1-79.34 FS313-480-Tap 4.50-4.80 1/2" 1 7-1/2" FS313-520-Tap 4.80-5.20 1/2" 1 7-1/2" 80.89 $ 160.59 3.3 3.9 5" FS313-556-Tap 5.56 5/ 1 7-1/2" 82.70 161.47 4.4 4.8 FS313-640-Tap 6.00-6.40 5/ 1 7-1/2" FS313-680-Tap 6.40-6.80 5/ 1 7-1/2" FS313-690-Tap 6.63-6.90 5/ 1 7-1/2" 115.74 165.27 4.7 5.1 FS313-720-Tap 6.80-7.20 5/ 1 7-1/2" FS313-840-Tap 8.00-8.40 5/ 1 7-1/2" FS313-880-Tap 8.40-8.80 5/ 1 7-1/2" FS313-905-Tap 8.63-9.05 5/ 1 7-1/2" 117.41 170.98 5.2 5.8 FS313-940-Tap 9.00-9.40 5/ 1 7-1/2" FS313-1040-Tap 10.00-10.40 5/ 1 7-1/2" 10" FS313-1110-Tap 10.75-11.10 5/ 1 7-1/2" 143.09 181.55 5.8 8.7 FS313-1150-Tap 11.10-11.50 5/ 1 7-1/2" FS313-1240-Tap 12.00-12.40 5/ 1 7-1/2" 12" FS313-1320-Tap 12.75-13.20 5/ 1 7-1/2" 146.35 191.08 6.4 9.3 FS313-1350-Tap 13.10-13.50 5/ 1 7-1/2" FS323 OUBLE BAN FS323-554-Tap 4.74-5.54 5/ 2 7-1/2" $ 120.24 $ 170.14 5.2 5.7 FS323-720-Tap 6.40-7.20 5/ 2 7-1/2" 125.30 174.83 5.1 5.8 FS323-920-Tap 8.40-9.20 5/ 2 7-1/2" 126.96 180.54 6.3 7.8 10" FS323-1150-Tap 10.70-11.50 5/ 2 7-1/2" 152.65 238.55 7.0 9.0 12" FS323-1350-Tap 12.70-13.50 5/ 2 7-1/2" 155.90 240.91 9.0 11.0 2" 3" 10" 12" 1 1 1 FSP323 OUBLE BAN (with Belleville washers) FSP323-1400-Tap FSP323-1530-Tap 14.00 15.30 5/ 2 7-1/2" $ 304.07 $ 306.48 10.0 12.0 FSP323-1600-Tap FSP323-1740-Tap 16.00 17.40 5/ 2 7-1/2" 317.65 326.66 10.5 12.5 FSP323-1800-Tap 18.00 FSP323-1950-Tap 19.50 5/ 2 7-1/2" 324.23 337.74 10.5 12.5 FSP333 TRIPLE BAN (with Belleville washers) FSP333-2000-Tap 20.00 5/ 3 7-1/2" 20" FSP333-2160-Tap 21.60 5/ 3 7-1/2" $ 408.10 $ 416.19 14.5 17.0 FSP333-2400-Tap 24.00 5/ 3 7-1/2" 2 FSP333-2580-Tap 25.80 5/ 3 7-1/2" 419.98 446.50 15.5 17.5 FSP333-3000-Tap 30.00 5/ 3 7-1/2" 30" FSP333-3200-Tap 32.00 5/ 3 7-1/2" 490.96 520.94 17.0 19.5 FSP343 QUA BAN (with Belleville washers) FSP343-3600-Tap 36.00 5/ 4 7-1/2" 3 FSP343-3830-Tap 38.30 5/ 4 7-1/2" $ 644.96 $ 677.04 14.5 17.0 One-bolt design Note: Coined outlet not available on 2" and 3" saddles. -8

FOR ALL STAINLESS REPAIR CLAMPS FOR USE ON PI July, 2017 STYLE FSP1 SINGLE BAN O.., A W. R 7.5" 10" 12.5" 15" 20" 2 30" 2" 2.38 *FSP1-238-Length $ 87.85 $ 97.67 $ 127.96 $ 140.04 $ 184.43 2.50 FSP1-250-Length 4 lbs. 4 lbs. 5 lbs. 5 lbs. 8 lbs. - - - 3" 3.50 FSP1-350-Length 100.28 112.41 149.37 163.26 201.76 4 5 5 6 9 - - - 4.50 FSP1-450-Length 103.54 117.69 162.86 187.28 207.75 $ 334.55 $ 422.87 $ 466.49 4.80 FSP1-480-Length 4 6 7 8 10 14 lbs. 16 lbs. 21 lbs. 6.63 FSP1-663-Length 139.41 190.72 221.80 249.04 406.92 489.01 553.13-6.90 FSP1-690-Length 7 9 10 14 17 21 27 8.63 FSP1-863-Length 161.58 215.93 257.92 297.96 437.00 543.30 640.26-9.05 FSP1-905-Length 8 10 11 15 19 24 30 10" 10.75 FSP1-1075-Length 218.44 297.81 347.64 396.72 533.39 778.02 887.50-11.10 FSP1-1110-Length 11 14 16 24 28 32 42 12" 12.75 FSP1-1275-Length 246.81 328.37 399.16 448.37 627.17 856.02 976.96-13.20 FSP1-1320-Length 13 16 18 27 30 36 48 Number of Studs 2 2 3 **3-4 4 6 7 9 * FSP1-238 is available up through 12.5" length. ** 12.5" long clamps in the 10" and 12" nominal pipe size have four studs. To Order: Specify catalog number and length of desired clamp. For example: An FSP1-663-125 would have a length of 12.5" and cover an O.. of 6.63". Notes: Optional electric conductivity strips are available on FSP1 clamps; add -CS to catalog number. Example: FSP1-663-75-CS Lengths 7.5" through 10" add $ 7.67. Lengths 12.5" and up add $ 13.40. Tapped outlets for clamps are available below. Optional Buna-N gaskets are available, add -N to the catalog number. Example: FSP1-663-75-N. Add 5% to the list price. Optional EPM gaskets are available, add -EPM to the catalog number. Example: FSP1-663-75-EPM Add 10% to the list price. FOR TAP REPAIR CLAMPS - CC AN IP TAPS OUTLET TAPS for corporation stops are available on ALL Ford Stainless Steel (FSP Style) or Ford Flex (FP Style) Repair Clamps. The minimum clamp size for each tap type and size is listed in the tapping code table below. The tapped outlet is 18-8 stainless steel and is fused to the clamp band by a fully passivated TIG weld. All tap options listed below are available on all FP3 clamps listed above. Note: Tapped repair clamps are non-returnable. CC (AWWA) T M. C C A FP1 FP2 FSP2 FSP1 3/ CC3 2.63 5.60 5.24 $ 59.41 1" CC4 2.63 5.60 5.24 59.41 1-1/ *CC5 3.70 5.60 5.24 76.69 1-1/2" CC6 4.25 5.60 5.24 76.69 2" CC7 4.73 5.60 5.57 95.13 * Contact factory for availability. * Contact factory for availability. To Order: 1. Select the proper code from table to match desired size and type of thread. 2. Add code to catalog number of repair clamp. Example: The number for an FSP1-690-125 with a 3/ CC tap is FSP1-690-125-CC3. IP T M. C C A FP1 FP2 FSP2 FSP1 3/ IP3 2.63 5.60 5.24 $ 59.41 1" IP4 2.63 5.60 5.24 59.41 1-1/ *IP5 3.70 5.60 5.24 76.69 1-1/2" IP6 3.70 5.60 5.24 76.69 2" IP7 4.25 5.60 5.57 85.14-9

July, 2017 STYLE FSP2 OUBLE BAN O.., A W L R 7.5" 10" 12.5" 15" 20" 2 30" 4.50 FSP2-450-Length $ 184.10 $ 247.39 $ 283.20 $ 347.25 $ 473.27 $ 605.40 4.80 FSP2-480-Length 11 lbs. 14 lbs. 18 lbs. 26 lbs. 32 lbs. 38 lbs. - 6.63 FSP2-663-Length 209.82 274.11 314.39 395.44 484.33 724.62 $ 856.34 6.90 FSP2-690-Length 12 15 19 28 35 42 45 lbs. 8.63 FSP2-863-Length 236.43 301.63 346.20 445.24 549.68 816.73 949.70 9.05 FSP2-905-Length 13 17 21 30 38 46 51 10" 10.75 FSP2-1075-Length 384.73 534.37 549.89 742.60 988.53 1154.21-11.10 FSP2-1110-Length 18 23 32 41 50 54 12" 12.75 FSP2-1275-Length 435.38 600.78 615.90 847.70 1088.72 1306.19 13.20 FSP2-1320-Length - 19 25 34 44 54 57 1 14.00 FSP2-1400-Length 488.79 673.39 732.60 949.49 1220.68 1466.39-15.30 FSP2-1530-Length 20 27 36 47 58 63 1 16.00 FSP2-1600-Length 553.12 722.42 798.62 1049.51 1351.75 1667.82 17.40 FSP2-1740-Length - 22 29 38 50 62 66 Number of Studs 4 6 *6-8 8 12 14 18 * 12.5" long clamps in the 10" through 1 nominal pipe size have 8 studs. To Order: Specify catalog number and length of desired clamp. For example: An FSP2-905-125 would have a length of 12.5" and cover an O.. of 9.05". Notes: Optional electric conductivity strips are available on FSP2-905 and larger, add -CS to catalog number. Example: FSP2-905-75-CS. Lengths 7.5" through 10" add $ 7.67. Lengths 12.5" and up add $ 13.40. Tapped repair clamp codes and prices are on page -9. Optional Buna-N gaskets are available, add -N to the catalog number. Example: FSP2-905-75-N. Add 5% to the list price. Optional EPM gaskets are available, add -EPM to the catalog number. Example: FSP2-905-75-EPM. Add 10% to the list price. STYLE FSP3 TRIPLE BAN O.., A W L. R 12.5" 15" 20" 2 30" 1 16.00 FSP3-1600-Length $ 829.87 $ 972.17 $ 1325.93 $ 1666.57 $ 2316.47 17.40 FSP3-1740-Length 31 lbs. 40 lbs. 52 lbs. 64 lbs. 77 lbs. 1 18.00 FSP3-1800-Length 872.77 1043.20 1422.09 1809.16 2364.23 19.50 FSP3-1950-Length 35 44 56 68 84 20" 20.00 FSP3-2000-Length 958.69 1077.47 1468.61 2011.29 2631.71 21.60 FSP3-2160-Length 41 48 60 73 89 2 25.80 FSP3-2580-Length 1190.61 1681.61 2287.18 2916.34 3840.38 46 53 65 79 102 Number of Studs 12 12 18 21 27 To Order: Specify catalog number and length of desired clamp. For example: An FSP3-1800-125 would have a length of 12.5" and cover an O.. of 18.00". Notes: Optional electric conductivity strips are available, add -CS to catalog number. Example: FSP3-1800-125-CS. Lengths 7.5" through 10" add $ 7.67. Lengths 12.5" and up add $ 13.40. Tapped repair clamp codes and prices are on page -9. Optional Buna-N gaskets are available, add -N to the catalog number. Example: FSP3-1800-125-N. Add 5% to the list price. Optional EPM gaskets are available, add -EPM to the catalog number. Example: FSP3-1800-125-EPM. Add 10% to the list price. -10

FOR FLEX REPAIR CLAMPS FOR USE ON PI July, 2017 To Order: Notes: STYLE FP1 SINGLE BAN O.., A W L.. R 7.5" 10" 12.5" 15" 20" 30" 2" 2.38 FP1-238-Length $ 91.99 $ 116.42 $ 135.03 $ 167.67 2.50 FP1-250-Length 7 lbs. 9 lbs. 12 lbs. 14 lbs. - - 3" 3.50 FP1-350-Length 105.69 137.77 155.34 190.05 8 10 12 14 - - 4.50 FP1-450-Length 114.28 156.14 183.97 203.20 307.94 466.32 4.80 FP1-480-Length 11 15 18 22 29 44 6.63 FP1-663-Length 134.20 181.78 215.83 241.12 356.97 525.92 6.90 FP1-690-Length 13 17 21 25 34 51 8.63 FP1-863-Length 157.72 211.92 253.85 291.92 412.09 590.07 9.05 FP1-905-Length 15 20 25 29 38 58 10" 10.75 FP1-1075-Length 197.12 266.91 311.10 359.40 479.79 699.59 11.10 FP1-1110-Length 16 21 28 31 41 62 12" 12.75 FP1-1275-Length 232.54 305.01 373.46 414.28 602.40 859.07 13.20 FP1-1320-Length 18 23 29 35 46 70 Number of Bolts 3 4 5 6 8 12 Add price for 5/ 304 stainless steel nuts and bolts. Add -S to Cat. No. (Example: FP1-663-75-S) 35.56 47.43 59.29 71.12 95.38 142.28 Specify catalog number and length of desired clamp. For example: An FP1-663-125 would have a length of 12.5" and cover an O.. of 6.63". Tapped repair clamp codes and prices are on page -12. Optional electric conductivity strips are available, add -CS to catalog number. Example: FP1-663-75-CS. Lengths 7.5" through 10" add $ 7.67. Lengths 12.5" and up add $ 13.40. Optional Buna-N gaskets are available, add -N to the catalog number. Example: FP1-663-75-N. Add 5% to the list price. Optional EPM gaskets are available, add -EPM to the catalog number. Example: FP1-663-75-EPM. Add 10% to the list price. Optional andlebolt available for clamps, add -B to the catalog number and $ 5.00 to the list price. Example: FP1-663-75-B STYLE FP2 OUBLE BAN 10" 12" 1 1 1 20" O.., A W L. R 7.5" 10" 12.5" 15" 20" 30" 4.50 FP2-450-Length $ 188.92 $ 250.12 $ 295.67 $ 357.65 $ 479.70 $ 729.31 4.80 FP2-480-Length 20 lbs. 27 lbs. 32 lbs. 40 lbs. 53 lbs. 80 lbs. 6.63 FP2-663-Length 213.70 275.93 325.02 403.98 541.80 817.70 6.90 FP2-690-Length 22 29 36 43 57 86 8.63 FP2-863-Length 239.16 302.40 356.27 451.87 616.46 918.92 9.05 FP2-905-Length 23 29 38 46 61 92 10.75 FP2-1075-Length 259.04 312.00 357.08 443.08 592.92 904.96 11.10 FP2-1110-Length 24 30 42 46 69 98 12.75 FP2-1275-Length 307.98 384.79 433.98 550.06 749.77 1120.43 13.20 FP2-1320-Length 27 30 44 47 70 100 14.00 FP2-1400-Length 497.74 749.97 1015.70 1535.43 - - 15.30 FP2-1530-Length 31 49 71 101 16.00 FP2-1600-Length 547.41 791.01 1035.88 1616.95 - - 17.40 FP2-1740-Length 32 50 72 104 18.00 FP2-1800-Length 574.76 830.15 1123.15 1697.88 - - 19.50 FP2-1950-Length 33 53 74 105 20.00 FP2-2000-Length 595.68 860.32 1183.83 1789.78 - - 21.60 FP2-2160-Length 35 54 75 106 Number of Bolts 6 8 10 12 16 24 Add price for 5/ 304 stainless steel nuts and bolts. Add -S to Cat. No. (Example: FP2-905-75-S) 71.12 89.72 118.57 142.28 189.71 284.57 To Order: Specify catalog number and length of desired clamp. For example: An FP2-905-125 would have a length of 12.5" and cover an O.. of 9.05". Notes: Tapped repair clamp codes and prices are on page -12. Optional electric conductivity strips are available, add -CS to catalog number. Example: FP2-905-75-CS. Lengths 7.5" through 10" add $ 7.67. Lengths 12.5" and up add $ 13.40. Optional Buna-N gaskets are available, add -N to the catalog number. Example: FP2-905-75-N. Add 5% to the list price. Optional EPM gaskets are available, add -EPM to the catalog number. Example: FP2-905-75-EPM. Add 10% to the list price. Optional andlebolt available for clamps, add -B to the catalog number and $ 5.00 to the list price. Example: FP2-905-75-B -11

July, 2017 FOR FLEX REPAIR CLAMPS FOR USE ON PI (CONTINUE) STYLE FP3 TRIPLE BAN 2 30" O.., A W L. R 10" 15" 20" 30" 24.00 FP3-2400-Length $ 1087.59 $ 1569.57 $ 2123.84 $ 3211.26 25.80 FP3-2580-Length 104 lbs. 152 lbs. 190 lbs. 275 lbs. 30.00 FP3-3000-Length $ 1185.41 $ 1712.53 $ 2316.93 $ 3503.02 32.00 FP3-3200-Length 113 163 204 290 NUMBER OF BOLTS 12 18 24 36 Add price for 5/ 304 stainless steel nuts and bolts. Add -S to Cat. No. (Example: FP3-2400-10-S) $ 134.57 $ 213.41 $ 284.56 $ 426.85 To Order: Specify catalog number and length of desired clamp. For example: An FP3-2400-20 would have a length of 20" and an O.. of 24.00". Notes: Tapped repair clamp codes and prices are listed below. Optional electric conductivity strips are available on FP3-2400 and larger, add -CS to catalog number. Example: FP3-2400-15-CS Length of 10" add $ 7.67. Lengths 12.5" and up add $ 13.40. Optional Buna-N gaskets are available, add -N to the catalog number. Add 5% to the list price. Optional EPM gaskets are available, add -EPM to the catalog number. Add 10% to the list price. FOR TAP REPAIR CLAMPS - CC AN IP TAPS OUTLET TAPS for corporation stops are available on ALL Ford stainless steel (FSP Style) or Ford Flex (FP Style) Repair Clamps. The minimum clamp size for each tap type and size is listed in the tapping code table below. The tapped outlet is 18-8 stainless steel and is fused to the clamp band by a fully passivated TIG weld. All tap options listed below are available on all FP3 clamps listed above. Note: Tapped repair clamps are non-returnable. CC (AWWA) T M. C C A FP1 FP2 FSP2 FSP1 3/ CC3 2.63 5.60 5.24 $ 59.41 1" CC4 2.63 5.60 5.24 59.41 1-1/ *CC5 3.70 5.60 5.24 76.69 1-1/2" CC6 4.25 5.60 5.24 76.69 2" CC7 4.73 5.60 5.57 95.13 * Contact factory for availability. * Contact factory for availability. IP T M. C C A FP1 FP2 FSP2 FSP1 3/ IP3 2.63 5.60 5.24 $ 59.41 1" IP4 2.63 5.60 5.24 59.41 1-1/ *IP5 3.70 5.60 5.24 76.69 1-1/2" IP6 3.70 5.60 5.24 76.69 2" IP7 4.25 5.60 5.57 85.14 To Order: Example: 1. Select the proper code from table to match desired size and type of thread. 2. Add code to catalog number of repair clamp. The number for an FSP1-690-125 with a 3/ CC tap is FSP1-690-125-CC3. -12

FOR UCTILE IRON COUPLINGS STYLE FC1 FOR PI July, 2017 *O F C G R E G R E C N. E C 1 R B 2 R W. B S.S. B C. N. C C. N. C B L. -S -ES 2" 2.34-2.63 2.34-2.63 2 6 FC1-263-263 $ 54.03 $ 74.79 $ 88.14 2-1/2" See 2" FC2A on next page 4.00 4.00 4.50-4.80 4.50-4.80 4.80-5.10 6.00 6.63-6.90 6.63-6.90 4.50-4.80 4.80-5.10 4.50-4.80 4.80-5.10 4.80-5.10 6.63-6.90 6.63-6.90 6.90-7.20 5" 3 14 5" 4 20 FC1-400-480 FC1-400-510 FC1-480-480 FC1-480-510 FC1-510-510 FC1-600-690 FC1-690-690 FC1-690-720 96.00 133.23 165.54 130.95 180.61 228.53 8.00 8.63-9.05 8.63-9.05 8.63-9.05 8.63-9.05 9.05-9.40 5" 5 29 FC1-800-905 FC1-905-905 FC1-905-940 174.77 232.54 300.73 10" 10.75 10.75 11.10-11.46 10.75 11.10-11.46 11.10-11.46 6 41.5 FC1-1075-1075 FC1-1075-1146 FC1-1146-1146 235.46 304.77 400.94 12" 12.75 12.75 13.20-13.56 12.75 13.20-13.56 13.20-13.56 7 54.5 FC1-1275-1275 FC1-1275-1356 FC1-1356-1356 271.68 352.57 483.20 FOR UCTILE IRON COUPLINGS STYLE FC1-L12 (12" lengths) FOR PI G R 1 E R B C. N. C 4.00 4.50-4.80 4.50-4.80 6.00 6.63-6.90 6.63-6.90 G R 2 C. N. 4.50-4.80 4.50-4.80 4.80-5.10 6.63-6.90 6.63-6.90 6.90-7.20 E R C C N. B W. L. 12" 3 29 12" 4 42 FC1-400-480-L12 FC1-480-480-L12 FC1-480-510-L12 FC1-600-690-L12 FC1-690-690-L12 FC1-690-720-L12 *O F C E C B S.S. B -S -ES $ 157.03 $ 221.30 $ 288.29 222.26 307.97 407.30 To Order: Locate the gasket range that accommodates your pipe O.. for both coupling ends. Example: To connect 6.63 O.. PVC pipe to 7.10 O.. pipe use catalog number FC1-690-720; for 12" long sleeve FC1-690-720-L12. *Options: S Standard coated coupling with stainless steel nuts and bolts: add -S to the catalog number. ES Epoxy coated coupling with stainless steel nuts and bolts: add -ES to the catalog number. Example: FC1-690-720-ES is an FC1 coupling with epoxy coating and stainless steel nuts and bolts. N Coupling with Buna-N gaskets: add -N to the catalog number and add 5% of the standard coupling price to the list price. -13

July, 2017 FOR TRANSITION COUPLINGS STYLE FC2A FOR PI 2" G R 1 C. N. E R C B G R 2 C. N. 2.30-2.45 2.40-2.65 E R C 2.30-2.45 2.40-2.65 2-1/2" 2.65-2.88 2.65-2.88 3" 3.45-3.60 3.45-3.60 3.70-3.88 3.70-3.88 4.00 4.50 4.50 4.80-5.14 4.80-5.14 5" 5.15-5.57 White/Gray 5.15-5.57 White/Gray 6.63 6.63 6.90-7.20 6.90-7.20 8.63 8.63 9.05-9.40 9.05-9.40 10.00 10.00 10.75 10.75 10" 11.10-11.40 11.10-11.40 11.42-11.77 11.42-11.77 11.77-12.12 White/Gray 11.77-12.12 White/Gray C N. B W. L. *O F C E C B S.S. B -S -ES 2 9 $ 54.35 $ 75.08 $ 96.14 3 14 89.13 120.28 152.95 5" 3 16 105.33 142.57 179.78 5" 4 24 143.70 193.36 249.78 5" 5 34 181.92 243.96 321.79 6 48 250.26 319.56 434.34 12" 12.75 12.75 13.20-13.50 13.20-13.50 7 62 298.17 379.04 521.97 1 13.69-14.04 White/Gray 13.69-14.04 White/Gray 15.30-15.70 15.30-15.70 9 79 492.68 644.99 824.50 1 16.00-16.35 16.00-16.35 17.40-17.80 17.40-17.80 10 103 593.22 762.45 998.75 1 19.50-20.00 19.50-20.00 7" 11 111 900.44 1086.61 1348.49 20" 21.60-22.06 21.60-22.06 7" 12 125 1079.87 1282.95 1559.31 2 25.80-26.32 25.80-26.32 10" 14 183 1836.68 2102.34 2416.73 To Order: Locate the gasket range that accommodates your pipe O.. for both coupling ends. Use the top range of each gasket size to determine the catalog number. Example: To connect 6.63 O.. pipe to 6.90 O.. pipe use catalog number FC2A-663-720. *Options: S Standard coated coupling with stainless steel nuts and bolts: add -S to the catalog number. ES Epoxy coated coupling with stainless steel nuts and bolts: add -ES to the catalog number. Example: FC2A-690-720-ES is an FC2A coupling with epoxy coating and stainless steel nuts and bolts. N Coupling with Buna-N gaskets: add -N to the catalog number and add 5% of the standard coupling price to the list price. Note: Gaskets for SR 35 sewer pipe are available in the following sizes: 4.22", 6.23", 10.50" and 12.50". Use these sizes as part of the catalog number. Contact factory for pricing. -14

FOR TRANSITION COUPLINGS STYLE FC2A-L12 (12" lengths) FOR PI July, 2017 G R 1 C. N. E R C B G R 2 C. N. 4.50 4.80-5.14 E R C C N. B W. L. *O F C E C B S.S. B -S -ES 4.50 4.80-5.14 12" 3 34 $ 191.19 $ 255.48 $ 334.02 5" 5.15-5.57 White/Gray 5.15-5.57 White/Gray 12" 3 34 191.19 255.48 334.02 6.63 6.63 6.90-7.20 6.90-7.20 12" 4 48 238.32 324.02 434.90 8.63 8.63 9.05-9.40 9.05-9.40 12" 5 63 304.32 411.08 522.32 10" 10.75 10.75 11.10-11.40 11.10-11.40 12" 6 83 421.00 549.55 741.28 12" 12.75 12.75 13.20-13.50 13.20-13.50 12" 7 106 492.42 642.40 887.26 1 13.69-14.04 White/Gray 13.69-14.04 White/Gray 14.03-14.38 White/Gray 14.03-14.38 White/Gray 12" 7 106 492.42 642.40 887.26 To Order: Locate the gasket range that accommodates your pipe O.. for both coupling ends. Use the top range of each gasket size to determine the catalog number. Example: To connect 6.63 O.. pipe to 6.90 O.. pipe use catalog number FC2A-663-720-L12. *Options: S Standard coated coupling with stainless steel nuts and bolts: add -S to the catalog number. ES Epoxy coated coupling with stainless steel nuts and bolts: add -ES to the catalog number. Example: FC2A-690-720-L12-ES is an FC2A coupling with epoxy coating and stainless steel nuts and bolts. N Coupling with Buna-N gaskets: add -N to the catalog number and add 5% of the standard coupling price to the list price. Note: Gaskets for SR 35 sewer pipe are available in the following sizes: 4.22", 6.23", 10.50" and 12.50". Use these sizes as part of the catalog number. Contact factory for pricing. -15

July, 2017 FOR ULTRA-FLEX WIE RANGE COUPLINGS - STYLE FC2W FOR PI R (I ) R ( ) B W. L. C. B I E O *-S 3" 2.50-4.29 63.5-109.0 FC2W-3 3 7" 27 $ 153.04 $ 208.79 3.96-5.60 100.6-142.2 FC2W-4 4 7" 35 165.11 242.81 6.23-7.60 158.2-193.0 FC2W-6 4 7" 44 233.54 311.23 8.40-9.75 213.3-247.6 FC2W-8 4 7" 52 272.67 350.33 10" 10.75-12.12 273.0-307.8 FC2W-10 6 9" 76 348.89 479.56 12" 12.75-14.38 323.8-365.25 FC2W-12 6 9" 97 411.69 542.38 1 16.00-17.80 406.4-452.12 FC2W-16 8 10" 135 938.50 1109.90 Epoxy coating and Buna-N Gaskets are standard with FC2W couplings. * S = Option for FC2W couplings with stainless steel nuts and bolts. Add -S to the catalog number. Example: FC2W-6-S COMPONENT PARTS FOR STYLE FC2W ULTRA-FLEX WIE RANGE COUPLINGS ALL COMPONENTS ARE PRICE EAC G C. N. E R C. N. C C. N. N B C. N. 3" FC2WG-3 $ 20.28 FC2W-ER-3 $ 19.45 FC2W-CS-3 $ 44.59 FBN-58-1125 $ 9.92 FC2WG-4 22.25 FC2W-ER-4 21.23 FC2W-CS-4 45.65 FBN-58-1125 9.92 FC2WG-6 33.67 FC2W-ER-6 32.38 FC2W-CS-6 67.37 FBN-58-1125 9.92 FC2WG-8 39.39 FC2W-ER-8 36.93 FC2W-CS-8 85.94 FBN-58-1125 9.92 10" FC2WG-10 42.98 FC2W-ER-10 37.70 FC2W-CS-10 105.38 FBN-58-135 11.07 12" FC2WG-12 53.47 FC2W-ER-12 43.26 FC2W-CS-12 134.27 FBN-58-135 11.07 1 FC2WG-16 121.32 FC2W-ER-16 139.66 FC2W-CS-16 366.66 FBN-58-155 12.77 3" 2.50-4.29 63.5-109.0 FC2W-3-L12 3 12" 35 $ 202.08 $ 244.56 3.96-5.60 100.6-142.2 FC2W-4-L12 4 12" 45 241.20 297.82 6.23-7.60 158.2-193.0 FC2W-6-L12 4 12" 56 305.96 362.60 8.40-9.75 213.3-247.6 FC2W-8-L12 4 12" 69 423.79 480.44 10" 10.75-12.12 273.0-307.8 FC2W-10-L12 6 12" 90 495.25 580.20 12" 12.75-14.38 323.8-365.25 FC2W-12-L12 6 12" 109 589.54 674.49 Epoxy coating and Buna-N Gaskets are standard with FC2W couplings. * S = Option for FC2W couplings with stainless steel nuts and bolts. Add -S to the catalog number. Example: FC2W-6-L12-S COMPONENT PARTS FOR STYLE FC2W-L12 ULTRA-FLEX WIE RANGE COUPLINGS ALL COMPONENTS ARE PRICE EAC -16 FOR ULTRA-FLEX WIE RANGE COUPLINGS WIT 12" LONG CENTER SLEEVES - STYLE FC2W - L12 FOR PI R (I ) G C. N. R ( ) E R C. N. B W. L. 12" C C. N. C. B I E O *-S N B C. N. 3" FC2WG-3 $ 20.28 FC2W-ER-3 $ 19.45 FC2W-CS-3-L12 $ 100.78 FBN-58-165 $ 11.79 FC2WG-4 22.25 FC2W-ER-4 21.23 FC2W-CS-4-L12 107.66 FBN-58-165 11.79 FC2WG-6 33.67 FC2W-ER-6 32.38 FC2W-CS-6-L12 126.38 FBN-58-165 11.79 FC2WG-8 39.39 FC2W-ER-8 36.93 FC2W-CS-8-L12 224.10 FBN-58-165 11.79 10" FC2WG-10 42.98 FC2W-ER-10 37.70 FC2W-CS-10-L12 262.22 FBN-58-165 11.79 12" FC2WG-12 53.47 FC2W-ER-12 43.26 FC2W-CS-12-L12 325.31 FBN-58-165 11.79

FOR EN CAP FOR ULTRA-FLEX WIE RANGE COUPLINGS FOR PI O.. R (I ) W. L. E C O E C W. L. July, 2017 3.96-5.60 FC2W-4-EC 44 $ 247.14 FECW-4 9 $ 87.13 6.23-7.60 FC2W-6-EC 57 322.43 FECW-6 13 95.81 8.40-9.75 FC2W-8-EC 75 395.79 FECW-8 23 128.40 10" 10.77-12.12 FC2W-10-EC 138 738.59 FECW-10 62 367.45 12" 12.75-14.38 FC2W-12-EC 178 913.13 FECW-12 80 490.36 FOR ULTRA-FLEX LONG SLEEVE WIE RANGE COUPLINGS FOR PI STYLE FC2W-EC (12" long) O.. R I MM W. L. E C O E C W. L. 3.96-5.60 100.6-142.2 FC2W-4-L12-EC 54 12" $ 323.22 FECW-4 9 $ 87.13 6.23-7.80 158.2-193.0 FC2W-6-L12-EC 68 12" 401.77 FECW-6 13 95.81 8.40-9.75 213.3-247.6 FC2W-8-L12-EC 87 12" 552.20 FECW-8 23 128.40 10" 10.75-12.12 273.0-307.8 FC2W-10-L12-EC 138 12" 862.70 FECW-10 62 367.45 12" 12.75-14.38 323.8-365.25 FC2W-12-L12-EC 178 12" 1090.19 FECW-12 80 490.36 FOR IRON REUCING COUPLINGS STYLE FRC FOR PI x 3" FRC- x FRC- R E 1 C. N. 3.95-4.05 4.45-4.60 4.80-5.00 4.92-5.16 5.17-5.32 5.95-6.05 6.54-6.76 6.81-7.12 7.17-7.37 7.37-7.60 E R C C White/Gray White/Gray Larger, fabricated steel reducing couplings are detailed in catalog section N. To Order: Find the range for each pipe O.. and complete the catalog number by using the top O.. of each range. For example, to couple 6.63 O.. to 4.50 O.. PVC the catalog number would be FRC-676-460. B R E 2 C. N. 3.45-3.60 3.70-3.88 3.91-4.06 4.07-4.20 3.95-4.05 4.45-4.60 4.70-4.91 4.92-5.16 5.17-5.32 E R C C White/Gray White/Gray W 23 $ 173.26 37 244.60 REUCING COUPLING PARTS ALL COMPONENTS ARE PRICE "EAC" C N. C x 3" FRC-CR-4-3 $ 49.59 x FRC-CR-6-4 114.35 E R N. FRC-LRER-4 FRC-LBER-4 FRC-LWER-4 FRC-LRER-6 FRC-LBER-6 FRC-LWER-6 E R $ 36.71 37.81 E R N. FRC-SRER-3 FRC-SBER-3 FRC-SWER-3 FRC-SRER-4 FRC-SBER-4 FRC-SWER-4 E R G G B N N. R. $ 64.25 $ 13.43 $ 11.07 4 $ 6.47 86.87 14.06 13.43 5 6.47-17

July, 2017 FOR IRON FLANGE COUPLING AAPTERS STYLE FFCA FOR PI 3" 10" 12" O.. R 3.45-3.60 3.70-3.88 4.45-4.60 4.70-4.91 6.54-6.76 6.81-7.12 8.50-8.75 8.76-9.17 10.69-10.85 11.04-11.40 12.72-12.84 13.14-13.56 E R C C FFCA-360 FFCA-388 FFCA-460 FFCA-491 FFCA-676 FFCA-712 FFCA-875 FFCA-917 FFCA-1085 FFCA-1140 FFCA-1284 FFCA-1356 O A Larger, fabricated steel flanged coupling adapters are available. Contact factory for additional information. W. L. Note: Optional anchor studs are available at $38.84 for each stud. For two studs add -AS2 to the catalog number; for four studs add -AS4 to the catalog number. This coupling is furnished with tee-head bolts and a built-in O-ring gasket. 2 2 2 4 4 4 18 18 22 22 31 31 42 42 55 55 63 63 $ 160.11 197.78 252.91 347.08 628.98 697.26 End rings and gaskets for FFCA s are not interchangeable with the balance of the Ford coupling system. FOR EN CAP COUPLINGS STYLE FEC FOR PI E C O O.. ( ) R W. L. FC1 FC2A 4.50 FEC-450 4.80-5.14 FEC-514 21 $ 195.49 FEC1-4 FEC2-4 $ 112.83 5.15-5.57 FEC-557 6.63 FEC-663 6.90-7.20 FEC-720 31 248.16 FEC1-6 FEC2-6 127.00 8.63 FEC-863 9.05-9.40 FEC-940 41 300.06 FEC1-8 FEC2-8 143.86 10" 11.10-11.40 FEC-1140 55 427.10 FEC1-10 FEC2-10 186.55 12" 13.20-13.50 FEC-1350 66 513.54 FEC1-12 FEC2-12 213.31 Caution: Customer is advised to provide proper thrust resistance to prevent movement on pipe. Note: 2" male iron pipe plugs are not included. Additional end caps which are not listed above are available upon request. Please specify coupling catalog number on which the end cap will be installed. -18

SERIES MJFA FLANGE AAPTER FOR PI July, 2017 T-B / N O.. R Q. W. L. 4.21-4.80 MJFA-4-I 4 3/ x 18 $ 115.37 6.27-6.90 MJFA-6-I 6 3/ x 35 170.70 8.40-9.05 MJFA-8-I 6 3/ x 4-1/2" 41 254.34 10" 10.50-11.10 MJFA-10-I 8 3/ x 4-1/2" 56 366.91 12" 12.50-13.20 MJFA-12-I 8 3/ x 4-1/2" 75 460.92 SERIES MJFA FLANGE AAPTER WIT FLANGE BOLTS FOR PI O.. R T-B / N F B / N Q. Q. W. L. 4.21-4.80 MJFA-4A-I 4 3/ 8 5/ 2-1/2" 21 $ 125.69 6.27-6.90 MJFA-6A-I 6 3/ 8 3/ 2-3/ 41 193.84 8.40-9.05 MJFA-8A-I 6 3/ 4-1/2" 8 3/ 2-3/ 47 275.73 10" 10.50-11.10 MJFA-10A-I 8 3/ 4-1/2" 12 7/ 3" 68 404.09 12" 12.50-13.20 MJFA-12A-I 8 3/ 4-1/2" 12 7/ 3-1/2" 88 499.29 COMPONENT PARTS C C / SO-EZ MJ F B / N G MJFA-CS-4-I $ 97.67 MJFA-CSA-4-I $ 113.79 SO-EZ-4 $ 10.22 MJFA-CS-6-I 162.23 MJFA-CSA-6-I 196.05 SO-EZ-6 14.56 MJFA-CS-8-I 271.69 MJFA-CSA-8-I 305.52 SO-EZ-8 16.63 10" MJFA-CS-10-I 367.68 MJFA-CSA-10-I 424.48 SO-EZ-10 27.20 12" MJFA-CS-12-I 486.69 MJFA-CSA-12-I 547.49 SO-EZ-12 31.11 FOR CUT-IN COUPLINGS STYLE FRR (15" long) FOR PI O.. R W. L. 4.80-5.14 FRR-514 38 $ 354.22 5.15-5.57 FRR-557 38 354.22 6.90-7.20 FRR-720 61 449.01 9.05-9.40 FRR-940 82 519.68 10" 11.10-11.40 FRR-1140 105 750.62 12" 13.20-13.50 FRR-1350 135 978.14 1 13.69-14.04 FRR-1404 135 993.29-19

July, 2017 FOR STEEL TRANSITION COUPLING FOR PI ( through 2) STYLE FC23 - FABRICATE STEEL CENTER SLEEVE WIT UCTILE IRON EN RINGS ow to order FC23 couplings: Locate the gasket range that accommodates your pipe O.. for both coupling ends. Select the desired center sleeve length and use the corresponding catalog number. * For stainless steel bolts and epoxy coating options, substitute the X or Y code for the standard catalog number R code. Example: FC23-400-450-05Y has epoxy coating and stainless steel bolts. & 5" *O F C 1 E 2 E N. A. S. E C G G C. W. C. B S.S. B R R B L. X Y 4.00 4.50 5 FC23-400-450-05R 3 17 $ 142.03 $ 179.97 $ 225.99 4.00 4.50 7 FC23-400-450-07R 3 22 167.94 221.25 280.81 4.00 4.50 10 FC23-400-450-10R 3 28 201.26 261.04 336.84 4.00 4.80-5.14 5 FC23-400-514-05R 3 17 142.03 179.97 225.99 4.00 4.80-5.14 7 FC23-400-514-07R 3 22 167.94 221.25 280.81 4.00 4.80-5.14 10 FC23-400-514-10R 3 28 201.26 261.04 336.84 4.00 5.15-5.57 5 FC23-400-557-05R 3 17 142.03 179.97 225.99 4.00 5.15-5.57 7 FC23-400-557-07R 3 22 167.94 221.25 280.81 4.00 5.15-5.57 10 FC23-400-557-10R 3 28 201.26 261.04 336.84 4.50 4.50 5 FC23-450-450-05R 3 17 142.03 179.97 225.99 4.50 4.50 7 FC23-450-450-07R 3 22 167.94 221.25 280.81 4.50 4.50 10 FC23-450-450-10R 3 28 201.26 261.04 336.84 4.50 4.80-5.14 5 FC23-450-514-05R 3 17 142.03 179.97 225.99 4.50 4.80-5.14 7 FC23-450-514-07R 3 22 167.94 221.25 280.81 4.50 4.80-5.14 10 FC23-450-514-10R 3 28 201.26 261.04 336.84 4.50 5.15-5.57 5 FC23-450-557-05R 3 17 142.03 179.97 225.99 4.50 5.15-5.57 7 FC23-450-557-07R 3 22 167.94 221.25 280.81 4.50 5.15-5.57 10 FC23-450-557-10R 3 28 201.26 261.04 336.84 4.80-5.14 4.80-5.14 5 FC23-514-514-05R 3 17 142.03 179.97 225.99 4.80-5.14 4.80-5.14 7 FC23-514-514-07R 3 22 167.94 221.25 280.81 4.80-5.14 4.80-5.14 10 FC23-514-514-10R 3 28 201.26 261.04 336.84 4.80-5.14 5.15-5.57 5 FC23-514-557-05R 3 17 142.03 179.97 225.99 4.80-5.14 5.15-5.57 7 FC23-514-557-07R 3 22 167.94 221.25 280.81 4.80-5.14 5.15-5.57 10 FC23-514-557-10R 3 28 201.26 261.04 336.84 5.15-5.57 5.15-5.57 5 FC23-557-557-05R 3 17 142.03 179.97 225.99 5.15-5.57 5.15-5.57 7 FC23-557-557-07R 3 22 167.94 221.25 280.81 5.15-5.57 5.15-5.57 10 FC23-557-557-10R 3 28 201.26 261.04 336.84 6.00 6.63 5 FC23-600-663-05R 4 19 201.65 252.27 303.72 6.00 6.63 7 FC23-600-663-07R 4 24 240.07 311.13 376.10 6.00 6.63 10 FC23-600-663-10R 4 29 295.11 374.82 453.34 6.00 6.90-7.20 5 FC23-600-720-05R 4 19 201.65 252.27 303.72 6.00 6.90-7.20 7 FC23-600-720-07R 4 24 240.07 311.13 376.10 6.00 6.90-7.20 10 FC23-600-720-10R 4 29 295.11 374.82 453.34 6.63 6.63 5 FC23-663-663-05R 4 19 201.65 252.27 303.72 6.63 6.63 7 FC23-663-663-07R 4 24 240.07 311.13 376.10 6.63 6.63 10 FC23-663-663-10R 4 29 295.11 374.82 453.34 6.63 6.90-7.20 5 FC23-663-720-05R 4 19 201.65 252.27 303.72 6.63 6.90-7.20 7 FC23-663-720-07R 4 24 240.07 311.13 376.10 6.63 6.90-7.20 10 FC23-663-720-10R 4 29 295.11 374.82 453.34 6.63 7.21-7.56 5 FC23-663-756-05R 4 19 201.65 252.27 303.72 6.63 7.21-7.56 7 FC23-663-756-07R 4 24 240.07 311.13 376.10 6.63 7.21-7.56 10 FC23-663-756-10R 4 29 295.11 374.82 453.34 6.90-7.20 6.90-7.20 5 FC23-720-720-05R 4 19 201.65 252.27 303.72 6.90-7.20 6.90-7.20 7 FC23-720-720-07R 4 24 240.07 311.13 376.10 6.90-7.20 6.90-7.20 10 FC23-720-720-10R 4 29 295.11 374.82 453.34 6.90-7.20 7.21-7.56 5 FC23-720-756-05R 4 19 201.65 252.27 303.72 6.90-7.20 7.21-7.56 7 FC23-720-756-07R 4 24 240.07 311.13 413.26 6.90-7.20 7.21-7.56 10 FC23-720-756-10R 4 29 295.11 374.82 453.34-20

July, 2017 FOR STEEL TRANSITION COUPLING FOR PI ( through 2) CONTINUE STYLE FC23 - FABRICATE STEEL CENTER SLEEVE WIT UCTILE IRON EN RINGS 10" *O F C N. A. S. E C 1 E 2 E C. W. C. B S.S. B G. R. G. R. B L. X Y 8.00 8.63 5 FC23-800-863-05R 5 26 $ 208.54 $ 271.79 $ 342.22 8.00 8.63 7 FC23-800-863-07R 5 32 238.72 327.56 414.19 8.00 8.63 10 FC23-800-863-10R 5 39 265.81 365.46 471.05 8.00 9.05-9.40 5 FC23-800-940-05R 5 26 208.54 271.79 342.22 8.00 9.05-9.40 7 FC23-800-940-07R 5 32 238.72 327.56 414.19 8.00 9.05-9.40 10 FC23-800-940-10R 5 39 265.81 365.46 471.05 8.63 8.63 5 FC23-863-863-05R 5 26 208.54 271.79 342.22 8.63 8.63 7 FC23-863-863-07R 5 32 238.72 327.56 414.19 8.63 8.63 10 FC23-863-863-10R 5 39 265.81 365.46 471.05 8.63 9.05-9.40 5 FC23-863-940-05R 5 26 208.54 271.79 342.22 8.63 9.05-9.40 7 FC23-863-940-07R 5 32 238.72 327.56 414.19 8.63 9.05-9.40 10 FC23-863-940-10R 5 39 265.81 365.46 471.05 8.63 9.40-9.74 5 FC23-863-974-05R 5 26 208.54 271.79 342.22 8.63 9.40-9.74 7 FC23-863-974-07R 5 32 238.72 327.56 414.19 8.63 9.40-9.74 10 FC23-863-974-10R 5 39 265.81 365.46 471.05 9.05-9.40 9.05-9.40 5 FC23-940-940-05R 5 26 208.54 271.79 342.22 9.05-9.40 9.05-9.40 7 FC23-940-940-07R 5 32 238.72 327.56 414.19 9.05-9.40 9.05-9.40 10 FC23-940-940-10R 5 39 265.81 365.46 471.05 9.05-9.40 9.40-9.74 5 FC23-940-974-05R 5 26 208.54 271.79 342.22 9.05-9.40 9.40-9.74 7 FC23-940-974-07R 5 32 238.72 327.56 414.19 9.05-9.40 9.40-9.74 10 FC23-940-974-10R 5 39 265.81 365.46 471.05 10.75 10.75 5 FC23-1075-1075-05R 6 33 240.30 316.22 405.56 10.75 10.75 7 FC23-1075-1075-07R 6 40 276.53 383.16 491.45 10.75 10.75 10 FC23-1075-1075-10R 6 49 308.63 428.18 560.84 10.75 11.10-11.40 5 FC23-1075-1140-05R 6 33 240.30 316.22 405.56 10.75 11.10-11.40 7 FC23-1075-1140-07R 6 40 276.53 383.16 491.45 10.75 11.10-11.40 10 FC23-1075-1140-10R 6 49 308.63 428.18 560.84 10.75 11.42-11.77 5 FC23-1075-1177-05R 6 33 240.30 316.22 405.56 10.75 11.42-11.77 7 FC23-1075-1177-07R 6 40 276.53 383.16 491.45 10.75 11.42-11.77 10 FC23-1075-1177-10R 6 49 308.63 428.18 560.84 10.75 11.77-12.12 5 FC23-1075-1212-05R 6 33 240.30 316.22 405.56 10.75 11.77-12.12 7 FC23-1075-1212-07R 6 40 276.53 383.16 491.45 10.75 11.77-12.12 10 FC23-1075-1212-10R 6 49 308.63 428.18 560.84 11.10-11.40 11.10-11.40 5 FC23-1140-1140-05R 6 33 240.30 316.22 405.56 11.10-11.40 11.10-11.40 7 FC23-1140-1140-07R 6 40 276.53 383.16 491.45 11.10-11.40 11.10-11.40 10 FC23-1140-1140-10R 6 49 308.63 428.18 560.84 11.10-11.40 11.42-11.77 5 FC23-1140-1177-05R 6 33 240.30 316.22 405.56 11.10-11.40 11.42-11.77 7 FC23-1140-1177-07R 6 40 276.53 383.16 491.45 11.10-11.40 11.42-11.77 10 FC23-1140-1177-10R 6 49 308.63 428.18 560.84 11.10-11.40 11.77-12.12 5 FC23-1140-1212-05R 6 33 240.30 316.22 405.56 11.10-11.40 11.77-12.12 7 FC23-1140-1212-07R 6 40 276.53 383.16 491.45 11.10-11.40 11.77-12.12 10 FC23-1140-1212-10R 6 49 308.63 428.18 560.84 Additional sizes on following page. -21