We make it EASY. KIT-RX-67NTL The best rebuild solution for replacing all moving parts in your No-Slack fifth wheel

Similar documents
Fifth Wheel Application Guide

Rebuild. Part number:

Contents/No-Slack. Built in secondary lock. For weight savings top plates, mounts and assemblies, look for this symbol.

Fontaine Fifth Wheel Ultra LT Service Manual

Section A: Fontaine No-Slack 7000CC, 7000 & Section B: Fontaine No-Slack Section C: Fontaine 3000 Series. Section D: Mounting information

November 1, Only. Gives You the TechLock. System Advantage FONTAINE

Fontaine. Fifth Wheel Installation Guide

Fontaine No-Slack Instructions

Feb 1, Only. Gives You the TechLock. System Advantage ASSEMBLY, DISASSEMBLY & TROUBLESHOOTING INSTRUCTIONS FOR CUSTOM DUTY SERIES

Fontaine Ultra NT Instructions

Fontaine Fifth Wheel Instructions. Armor Yard Truck

What about cold weather?... Sec E: 2. How do I find my serial number?... Sec E: 2

Patented secondary lock provides added safety and security

Retractable Handle Rebuild Procedures

Fontaine Ultra LT Instructions

Fontaine Ultra it Instructions

Fontaine Custom Duty Instructions

Fifth Wheel, Fontaine H5092 Series 31.07

FWS1 and FWS2 Series Fifth Wheels

Troubleshooting Guide

<THESE INSTRUCTIONS MUST BE GIVEN TO THE END USER> 1 2 " X 1 1 2" Hex Cap Screws " Split Lock Washers " Threaded block 4

INSTALLATION / OPERATING INSTRUCTIONS Reese Elite Series FIFTH WHEEL SLIDER HITCH

BXR6200 Super Ride 20K 5 th Wheel Hitch

Model 3770 WARNING. Failure to comply with the safety information in these instructions could result in serious injury or death.

16K ORBITAL ROTATING RUBBER PIN BOX *

Page 1. 11/17 HJ26201 Rev 1

Turning Point Pin Box. by Trailair OWNER'S MANUAL

<THESE INSTRUCTIONS MUST BE GIVEN TO THE END USER> BASE BOLT BAG (RVB3500) ITEM DESCRIPTION QTY. 1 2 " X 1 1 2" Hex Cap Screws 16

Subject: Service Bulletin - Ultra LT Fifth Wheel Damage Caused by Improper Coupling

BXR6200 Super Ride 20K 5 th Wheel Hitch

B&W Trailer Hitches 1216 Hawaii Road / PO Box 186 Humboldt, KS P: F: " Split Lock Washers 8

Trigger Assembly Replacement Instructions Trigger Assembly Kit (ARMORTAK)

<THESE INSTRUCTIONS MUST BE GIVEN TO THE END USER> B&W Trailer Hitches 1216 Hawaii Road / PO Box 186 Humboldt, KS P: F:

FIFTH WHEELS TROUBLESHOOTING AND REBUILD PROCEDURES. XA-71 Series Fifth Wheel Top Plates. XA-71-DA 2 SAE Kingpin (Rebuild Kit RK-65014)

<THESE INSTRUCTIONS MUST BE GIVEN TO THE END USER> B&W Trailer Hitches 1216 Hawaii Road / PO Box 186 Humboldt, KS P: F:

B&W Trailer Hitches 1216 Hawaii Road / PO Box 186 Humboldt, KS P: F:

B&W Trailer Hitches 1216 Hawaii Road / PO Box 186 Humboldt, KS P: F:

BXR6200 Super Ride 20K 5 th Wheel Hitch

INSTRUCTION MANUAL 16K - Fifth Wheel Hitch

<THESE INSTRUCTIONS MUST BE GIVEN TO THE END USER> B&W Trailer Hitches 1216 Hawaii Road / PO Box 186 Humboldt, KS P: F:

BXR7200 Super Ride 20K 5 th Wheel Hitch

Page 1. 2/18 HJ26180 Rev 3

<THESE INSTRUCTIONS MUST BE GIVEN TO THE END USER> B&W

ASSEMBLY INSTRUCTIONS Reese Elite Series FIFTH WHEEL SLIDER HITCH

BXR7200 Super Ride 20K 5 th Wheel Hitch

Model 3400 ATTENTION: WARNING

Suzuki Samurai to Toyota Front Spring Swap Kit, with Missing Link Shackles (SKU#SSP-TSFM) Installation Instructions

Turning Point Pin Box. by Trailair OWNER'S MANUAL

Required tools General hand tools 21/64" drill bit Torque wrench Threadlocker Center punch

Instruction Manual 15K - Fifth Wheel Hitch Part Number 6030 & 6031

Owner s Manual. PH-T-60-AOS-L-8 Swivel Mount Pintle Hook. XL-PH20032UM-en-US Rev A

Jaw Replacement Instructions Jaw Replacement Kit (ARMORJRK)

INSTRUCTION MANUAL R16 - Fifth Wheel Hitch

2/18 HJ26076 Rev 7 1

INSTRUCTION MANUAL TITAN 16K - Fifth Wheel Hitch Plymouth MI

INSTRUCTION MANUAL 16K - Fifth Wheel Hitch

INSTRUCTION MANUAL 22K - Fifth Wheel Hitch

K Autoslide & K Autoslide

KWIK-LOC TANDEM DOLLIE PARTS MANUAL CRAFTSMEN TRAILER, LLC. 2007

Air Cylinder Replacment Instructions Air Cylinder Kit (AMORACK)

Instruction Manual Montage- und Betriebsanleitung Notice d utilisation

Please visit for the latest version of these installation instructions.

Model 123 Weld-On Adjustable Drawbar Eye

INSTALLATION INSTRUCTIONS

WARNING indicates a potentially hazardous situation which, if not avoided, could result in property damage, serious personal injury or even death.

You must read and understand the instructions in this manual before operating your fifth wheel.

7/18 HJ26077 Rev 16. US Pat. 7,506,886 US Pat. 7,753,392 CA Pat. 2,576,427 AS Pat PAGE 1

INSTRUCTION MANUAL Kwik Slide

20K - Fifth Wheel Hitch

MAINTENANCE WEIGHT RATINGS WARNINGS. warning: never exceed your vehicle manufacturer's recommended towing capacity

Model 6 Weld-On Drawbar Eye

K Autoslide. HJ26141, Rev 13 12/18

6/17 HJ26077 Rev 12. US Pat. 7,506,886 US Pat. 7,753,392 CA Pat. 2,576,427 AS Pat PAGE 1

MS2200, MS2500, and MS3000 Suspension Installation Manual ON/OFF HIGHWAY SUSPENSION SYSTEM

PAGE 1. 7/18 HJ26141 Rev 12

INSTALLATION MANUAL FOR ROCK KRAWLER SUSPENSION, INC. WJ SHORT ARM SYSTEMS

Lock Assembly Kit Replacement Instructions Lock Assembly Kit (ARMORLAK)

INSTALLATION INSTRUCTIONS

Instruction Manual 30K - Fifth Wheel Hitch Part Number 30054

Cover Plate Replacement Instructions Cover Plate Kit (ARMORCPK)

WRANGLER TJ INSTALLATION INSTRUCTIONS Kit #: TJ251K/KN/KST/KSTN TJ401K/KN/KST/KSTN

R20 - Fifth Wheel Hitch

COMPANION OEM HITCH YOUR TOWING ADVENTURE BEGINS

FIFTH WHEELS FWS1/FWS2 REBUILDING PROCEDURES

Installation Instructions

20K - Fifth Wheel Hitch

Parkit360 Transformer

Owner s Manual. FW17 Series Fifth Wheel. XL-FW10025UM-en-US. Operation, Maintenance and Troubleshooting Procedures

»Product» Safety Warning

SwayPro. NOTE: A minimum tongue weight of 200 lbs. is required THANK YOU

OWNER S GUIDE 8A DURALIFT II 13,200 LB. CAPACITY. Link Mfg. Ltd th St. N.E. Sioux Center, IA USA

HIGH RISE POWER ANGLE KIT

XJ CHEROKEE LIFT KIT

XJ CHEROKEE LIFT KIT

»Product» Safety Warning

AUGUST /SEPTEMBER SPECIAL

Rating when used as a weight distributing hitch with spring bars:

STOP. 44" High Speed Sweeper. Operator's Manual. Model No Safety Assembly Operation Maintenance Parts

Model 690L / 690R / 690T Coupling

INSTRUCTION MANUAL 16K - Fifth Wheel Hitch

Transcription:

We make it EASY No-Slack turn-key solutions matched to your requirements! KIT-RPR-000L The best repair solution for replacing No-Slack jaw, wedge and springs Fontaine s legendary customer support is unmatched in the aftermarket. We are your fifth wheel experts providing REPAIR, REBUILD or REPLACE options that save you time and money. Ask your Fontaine representative to help you match the right solution to your situation. KIT-RX-NTL The best rebuild solution for replacing all moving parts in your No-Slack fifth wheel SLTPL000,000 lbs vert load 0,000 lbs drawbar pull Cast steel housing with No-Slack lock Moderate-Duty On/Off Highway The best No-Slack replacement solution if your top plate is damaged beyond repair Aftermarket Parts Catalog NEW! Online Part Search and Chat Now Available! www.fifthwheel.com

Introduction Page Part Number Identification... Measurements... Serial Number Location... Top Plate Options... Duty Restrictions... No-Slack Part Information No-Slack top plate kits...- Helpful Tools... No-Slack H kits... No-Slack H(X)0 kits...0-000 part information... CD00 Auto Hauler... Pin and Bushing Kits... Slide Brackets and Rails Page NWB... LWB... LWO... ATB... AWB... AWX...0 Stationary Options Fixed... Plate & Angled Mounts... Blocked Fifth Wheels... Helpful Information Important Application Notes... Lubrication... Jaw/Wedge Adjustment... Cold Weather Maintenance... We make it EASY Fontaine s legendary customer support is unmatched in the aftermarket. We are your fifth wheel experts: providing cost-cutting training; How-To videos; printed materials; digital materials... whatever it takes to help you find the fifth wheel information you need quickly and easily. Demand only GENUINE Fontaine fifth wheels. Will fit top plates simply do not give you the No-Slack advantage. SLTPL000 New LOWER PRICE on genuine Fontaine No-Slack lock Buy only the best... Don t settle for less! Chat at www.fifthwheel.com Easy Model# or Serial# lookup How-To Videos and Training Mobile App Coming Soon 00--0 partsfpc@fifthwheel.com www.fifthwheel.com

This guide explains the nomenclature for Fontaine Fifth Wheel complete assembly part numbers. See example part number at right: Part Number Identification SLNWB0 Release Top plate model Mounting Bracket model Mounting height Slide travel SL = Side left = No-Slack 000 Slides 0 = -/" = " slide SR = Side right = No-Slack 000 NWB = Light weight Actual height from Sliding fifth AA = Air actuated C = 000CC Clean slide bracket truck frame to top wheels only. of fifth wheel. BL = Blocked left Connect LWB = Light weight (H only) H = No-Slack H slide bracket Examples: Examples: = " slide AL = Auto-lube left LWO = Light weight slide bracket = -/" = " slide SLE = Electronic lock 0 = -/" = " slide indicator left ATB = Slide bracket = -/" (000 only) AWB = Slide bracket = " slide 0 = -/" AWX = Slide bracket Fixed Mounts BSL = Stationary bracket mount FMA = Stationary bracket mount Plate Mounts PML = Adjustable plate mount APB = Adjustable plate mount PS = Stationary short plate mount Blocked (No-Tilt) Mounts BLHAWB = Blocked Air slide bracket bracket BLHPS = Blocked Stationary short plate mount Measurements & Serial Number Location How do I measure a fifth wheel? X A How do I find the serial number Serial number engraved directly into the right side of fifth wheel skirt. Note: position and of the serial number indicates the year built. Serial number is always digits. The installed height of all Fontaine models is measured from the top of the truck frame to the top of the fifth wheel. For standard models dimension A is a part of the model number. For example, if dimension A in this diagram is. inches, it would appear in the model number as 0 (Example: SLAWB0). No-Slack right side view serial number location 00--0 partsfpc@fifthwheel.com www.fifthwheel.com

No-Slack Top Plate Options No-Slack 000 series 0,000 pounds vertical load. 0,000 pounds drawbar pull. The innovative 000 series fifth wheel features the patented self-adjusting No-Slack locking mechanism with a positive secondary lock that can only be released by pulling the handle. A locking trigger helps minimize high-hitching to reduce tractor, trailer and tire damage. The lock automatically self-adjusts to the trailer kingpin for a smoother ride, lower maintenance costs and longer component life. Rated for standard to moderate duty on-highway use only, including tankers. Part Number: SLTPL000 No-Slack 000 series,000 pounds vertical load. 0,000 pounds drawbar pull. The 000 series offers all the benefits of our 000 series, but in a cast design rather than pressed steel. It features the self-adjusting No-Slack locking mechanism. Rated for moderate to severe duty for both on-highway and off-highway applications. Part Number: SLTPL000 No-Slack 000CC series Clean Connect,000 pounds vertical load. 0,000 pounds drawbar pull. The 000CC series Clean-Connect offers all the benefits of the 000 series fifth wheels plus the added benefit of a grease free top plate surface. With Clean-Connect technology the fifth wheel no longer requires grease to lubricate between the top plate surface and the trailer coupling plate. This eliminates the labor costs, materials and downtime associated with greasing the top plate surface. Rated for moderate duty for on-highway applications. Part Number: SLTPL000CC No-Slack H Heavy Duty Series Rating on AWB mounts Rating on PS and AWX mounts,00 lbs vertical load 0,000 lbs vertical load 0,000 pounds drawbar 00,000 pounds drawbar pull The H Series offers all the benefits of No-Slack technology in a steel reinforced cast housing. This rugged workhorse is rated for extra heavy-duty to severe-duty in both on-highway and off-highway applications. It s also available as a blocked fifth wheel to accommodate frameless dump applications. New Innovation Part Number: SLTPLH 00--0 partsfpc@fifthwheel.com www.fifthwheel.com

Duty Class Restrictions With the Fontaine Fifth Wheel complete product line you can easily select the perfect fifth wheel for your application. We offer top plates and mounting options in a wide variety of sizes to handle even the most demanding applications. To specify the right fifth wheel for your application two factors must be considered: load capacity and service conditions. Weight refers to the amount of weight that a fifth wheel can handle. Road type refers to the operating environment and the type of equipment used in an application. Travel type refers to mileage between stops. Weight: Road type: Travel type: Axle limitation: Standard Duty Less than,000 lbs (,000 kgs) gross combination weight (GCW) 00% on-highway application on maintained concrete or asphalt roads More than 0 miles between each couple Maximum number of towed axles equals You don t choose a top plate based on weight only. Consider service conditions because a heavy load pulled on a paved road places less stress on a fifth wheel than a lighter load pulled in severe off-highway conditions. The duty class restriction chart, top plate styles chart (page ), and mounting bracket model chart (page ) can be used as a guide to help you select the right fifth wheel. Fontaine has an application guide (LT-0) that can be obtained at: www.fifthwheel.com (Choose Support and then Helpful information ). If you need further assistance contact Fontaine Fifth Wheel at: 00--0. On-line selection guide is available. Scan code or go to: www.fifthwheel.com Choose Support then choose Choosing the right fifth wheel Weight: Road type: Travel type: Axle limitation: Moderate duty (on-highway) Less than,000 lbs (,000 kgs) gross combination weight (GCW) 00% on-highway application on maintained concrete or asphalt roads No minimum mileage between couples Maximum number of towed axles equals Weight: Road type: Travel type: Axle limitation: Moderate duty (off-highway) Less than,000 lbs (,000 kgs) gross combination weight (GCW) Less than 0% off-highway application on maintained concrete, asphalt, gravel or crushed rock roads No minimum mileage between couples Maximum number of towed axles equals Weight: Road type: Travel type: Axle limitation: Severe duty (on-highway) More than,000 lbs (,000 kgs) gross combination weight (GCW) Less than 0% off-highway application on maintained concrete, asphalt, gravel or crushed rock roads No minimum mileage between couples. No axle limitations Weight: Road type: Travel type: Axle limitation: Special applications: Severe duty (off-highway) More than,000 lbs (,000 kgs) gross combination weight (GCW) Any off-highway application on all road types including non-maintained roads No minimum mileage between couples No axle limitations All logging, mining and oil field applications fall into this category regardless of anticipated weight, road type or number of axles 00--0 partsfpc@fifthwheel.com www.fifthwheel.com

Repair Repair kit (KIT-RPR-000L or R) Description Bumper spring Handle spring Timer spring Step jaw Wedge 0 Bushing, /" Bushing, /" Bushing, /" Hex lock nut, /" - Spring kit (KIT-SPRING) Bumper spring Handle spring Timer spring Wedge-stop rod kit (KIT-ROD-0) Wedge-stop rod nut Flat washer, /" I.D. Wedge-stop rod spring Wedge-stop rod Cotter pin, /" x " Secondary lock kit (KIT-LAT-000L or R) Handle spring Hex head bolt, /" - Flat washer, /" I.D. 0 Bushing, /" Secondary lock Hex lock nut, /" - Cotter pin, /" x " Pull handle kit (KIT-PUL-000L or R) Pull handle Flat washer, /" I.D. Cotter pin, /" x " Bumper kit (KIT-BPR-000L or R) Hex lock nut, /" - Flat washer, /" I.D. Bushing Hex head bolt, /" - Bumper Bumper spring Timer kit (KIT-TMR-000L or R) Timer spring Timer Hex lock nut, /" - Hair pin cotter Operating handle kit (KIT-OPR-000) 0 Bushing, /" Bushing, /" Bushing, /" Hex lock nut, /" - Flat washer, /" I.D. Hex head bolt, /" - 0 Operating handle Hair pin cotter For pin and bushing kits see page. Rebuild Part number: KIT-RX-NTL Major rebuild kit for left side (driver) handle release NT/000/ 000/ 000CC. Kit does not include bracket pins, bushings or Clean Connect plate kits. kits shown at left combined in saves you time and money Parts are arranged in the sequence for easy installation Complete instructions and link to video Reduce inventory Keep all the benefits of No-Slack technology 000CC Options 0 Clean Connect plate kits (000CC) Description (CCR-PLATES-R) Right CC plate Flat washer Hex lock nut (CCR-PLATES-L) Left CC plate Flat washer Hex lock nut No-Slack Top Plate Kits No-Slack NT/000/000/000CC Clean Connect plates can only be used with the 000CC fifth wheel top plate. Replace per side Replace or upgrade your fifth wheel top plate. 000 SLTPL000 (Driver side release) SRTPL000 (Passenger side) AATPL000 (Air Actuated) For ratings see page. 0 000 SLTPL000 (Driver side release) SRTPL000 (Passenger side) 000CC (Clean Connect) SLTPL000CC (Driver side release) AATPL000CC (Air Actuated) NT* SLTPLUNT (Driver side release) SRTPLUNT (Passenger side) *Replaces NT and 000 models only. For pin and bushing kits see pages. 00--0 partsfpc@fifthwheel.com www.fifthwheel.com

Repair Repair kit (KIT-RPR-000L or R) Bumper spring Handle spring Timer spring Step jaw Wedge Bushing, /" Bushing, /" Bushing, /" Hex lock nut, /" - No-Slack No-Slack NT/000/000/000CC Wedge-stop rod kit (KIT-ROD-0) Top Plate Kits Wedge-stop rod nut Flat washer, /" I.D. Wedge-stop rod spring Wedge-stop rod Cotter pin, /" x " Secondary lock kit (KIT-LAT-000L or R) Handle spring Hex head bolt, /" - Flat washer, /" I.D. Bushing, /" Secondary lock Hex lock nut, /" - Cotter pin, /" x " Spring kit (KIT-SPRING) Bumper spring Handle spring Timer spring Pull handle kit (KIT-PUL-000L or R) For H pull handle see page. Pull handle Flat washer, /" I.D. Cotter pin, /" x " Bumper kit (KIT-BPR-000L or R) Hex lock nut, /" - Flat washer, /" I.D. Bushing Hex head bolt, /" - Bumper Bumper spring Timer kit (KIT-TMR-000L or R) Timer spring Timer Hex lock nut, /" - Hair pin cotter Operating handle kit (KIT-OPR-000) For H operating handle see page. Bushing, /" Bushing, /" Bushing, /" Hex lock nut, /" - Flat washer, /" I.D. Hex head bolt, /" - Operating handle Hair pin cotter 00--0 partsfpc@fifthwheel.com www.fifthwheel.com

Options 000CC Kit Options Left Clean Connect Plate kit Part number: CCR-PLATES-L No-Slack Top Plate Kits No-Slack NT/000/000/000CC series top plate kits Left CC plate Flat washer Hex lock nut Helpful Tools After a rebuild don't forget to properly adjust your fifth wheel. See page. Right Clean Connect Plate kit Part number: CCR-PLATES-R Right CC plate Flat washer Hex lock nut Part number: KITKPT Test kingpin is an excellent tool for jaw and wedge adjustment (see page ). Air actuated kit Part number: KIT-AA-000L or KIT-AA-000LR This kit includes the parts mounted to the fifth wheel. If you are upgrading from manual to air actuated you will also need KIT-AIR-DASH which includes the parts required to complete the in-dash installation. Description Quantity Hex head bolt Hex lock nut Air cylinder Mini-matic jumbo exhaust valve (VLV-) Hex lock nut Flat washer Shoulder bolt Springs Part number: KIT-AIR-DASH -/" /" diameter holes Part number: KIT-FRX-STAND Kit to complete the in-dash installation. Part number: KIT-AIR-COIL Parts required to connect the air actuated fifth wheel or fifth wheel air sliders to the air system. Repair and display stand. Top plate is not included. Part number: VLV-PUL Pull valve used in dash 00--0 partsfpc@fifthwheel.com www.fifthwheel.com

Repair Repair kit (KIT-RPR-000L) Description Bumper spring Handle spring Timer spring Step jaw Wedge 0 Bushing, /" Bushing, /" Bushing, /" Hex lock nut, /" - Spring kit (KIT-SPRING) Bumper spring Handle spring Timer spring Wedge-stop rod kit (KIT-ROD-0) Wedge-stop rod nut Flat washer, /" I.D. Wedge-stop rod spring Wedge-stop rod Cotter pin, /" x " Secondary lock kit (KIT-LAT-000L) Handle spring Hex head bolt, /" - Flat washer, /" I.D. 0 Bushing, /" Secondary lock Hex lock nut, /" - Cotter pin, /" x " Pull handle kit (KITPULH) Heavy Duty Pull Handle Hex lock nut, /" - Bumper kit (KIT-BPR-000) Hex lock nut, /" - Flat washer, /" I.D. Bushing Hex head bolt, /" - Bumper Bumper spring Timer kit (KIT-TMR-000L) Timer spring Timer Hex lock nut, /" - Hair pin cotter For pin and bushing kits see page. 0 Replace Replace or upgrade your fifth wheel top plate. H Repair Kits H Heavy Duty SLTPLH (Driver side release) H is the recommended replacement for H0 and X0 Operating handle kit (KITOPRH) No-Slack Bushing, /" Bushing, /" Bushing, /" Hex lock nut, /" - Flat washer, /" I.D. Hex head bolt, /" - Heavy Duty Operating Handle Hair pin cotter Top Plate Kits No-Slack H series 0 Operating handle kit (KITOPRH) 0 Bushing, /" Bushing, /" Bushing, /" Hex lock nut, /" - Flat washer, /" I.D. Hex head bolt, /" - 0 Operating Handle Hair pin cotter Pull handle kit (KITPULH) Heavy Duty Pull Handle Hex lock nut, /" - With the exception of the two kits above, H uses same kits as No-Slack on page. 00--0 partsfpc@fifthwheel.com www.fifthwheel.com

No-Slack Top Plate Kits H0/X0 series 0 0 0 Repair Repair kit (KIT-RPR-0L or R) Description Step jaw Jaw and wedge spring 0 Cotter pin, /" x " Wedge Bumper spring Bushing, /" Hex lock nut, /" - Bushing, /" Hex lock nut, /" - Wedge-stop rod kit (KIT-ROD-0) Description Quan. Cotter pin, /" x " Wedge-stop rod Flat washer, /" I.D. Wedge-stop rod spring Wedge-stop rod nut Rebuild Part number: KIT-RX-0L Major rebuild kit for left side (driver) handle release H0 and X0 top plates. Kit does not include bracket pins, bushings. Multiple kits combined in one saves you money Parts are arranged in the sequence you need them Complete instructions and link to video to make rebuild easy Reduce inventory Keep all the benefits of No-Slack technology H Heavy Duty SLTPLH (Driver side release) Excellent replacement for H0 and X0 fifth wheel top plates Mounts on existing H0/X0 slides and brackets 0,000 lbs vertical load 0,000 to 00,00 lbs drawbar pull Improved No-Slack locking mechanism Replace Pull handle kit (KIT-PUL-0) Description Quan. Leaf spring Self tapping screw Pull handle Cotter pin, /" x " Flat washer, /" I.D. Timer kit (KIT-TMR-L or R) Description Quan. Timer Bushing /" 0 Hex lock nut, /" - Bushing /" Bumper kit (KIT-BPR-0L or R) Description Quan. Wedge Bumper spring Bushing, /" Bumper Hex lock nut, /" - Bushing, /" Flat washer, /" I.D. Hex head bolt, /" - Operating handle kit (OPR-000SL or SR) Description Quan. Hex head bolt, /" - Bushing /" Flat washer, /" I.D. 0 Hex lock nut, /" - Operating handle Hex lock nut, /" - Bushing /" Flat washer, /" I.D. Hex head bolt, /" - 0 00--0 partsfpc@fifthwheel.com www.fifthwheel.com

Repair Repair kit (KIT-RPR-0L or R) Step jaw Jaw and wedge spring Cotter pin, /" x " Wedge Bumper spring Bushing, /" Hex lock nut, /" - Bushing, /" Hex lock nut, /" - No-Slack Wedge-stop rod kit (KIT-ROD-0) Top Plate Kits H0/X0 series Wedge-stop rod nut Flat washer, /" I.D. Wedge-stop rod spring Wedge-stop rod Cotter pin, /" x " Pull handle kit (KIT-PUL-0) Leaf spring Self tapping screw Pull handle Cotter pin, /" x " Flat washer, /" I.D. Timer kit (KIT-TMR-L or R) Timer Bushing /" Hex lock nut, /" - Bushing /" Bumper kit (KIT-BPR-0L or R) Wedge Bumper spring Bushing, /" Bumper Hex lock nut, /" - Bushing, /" Flat washer, /" I.D. Hex head bolt, /" - Operating handle kit (OPR-000SL or SR) Description Hex head bolt, /" - Bushing /" Flat washer, /" I.D. Hex lock nut, /" - Operating handle Hex lock nut, /" - Bushing /" Flat washer, /" I.D. Hex head bolt, /" - 00--0 partsfpc@fifthwheel.com www.fifthwheel.com

000 Series Top Plate Kits 0 0 0 Rebuild 000 Major Rebuild Kit (KIT-RX-000L) Description Pivot Pin Hex Socket Button Head Screw, MXMM Flat Washer, M Wear Ring Cotter Pin Security Clip Adjustment Rod Adjustment Rod Nut, M Square Main Spring 0 Hex Head Bolt, M X MM Pull Handle Rotating Locking Jaw Jaw Spring Washer, /" Operating Handle Nylok Nut, M Locking Wedge Replace NT SLTPLUNT (Driver side release) SRTPLUNT (Passenger side) Bracket pin kit (KIT-PIN-000) Description Cotter pin Bracket liners Bracket pin Bracket retainer pin 0 -piece bushing Bushing kit (BSH-000) Description 0 -piece bushing Bracket liners 00--0 partsfpc@fifthwheel.com www.fifthwheel.com

0 CD 00 Series Custom Duty Top Plate Kits Repair Handle kit for 00 (KIT-CD-HDL) Description Quantity Cotter pin, /" x " 0 Lock pin Hair pin cotter Chain Handle grip Pull handle Bushing, /" Hex head flanged bolt, nut Flat head socket, /"- x -/", grade Bushing 0 Operating handle Flat washer, /", plain Hex lock nut, /" -, grade "B" Cotter pin, /" x " Wedge-stop rod kit (KIT-CD-ROD) Description Quantity Wedge-stop rod Wedge-stop rod nut Wedge-stop rod spring Bracket pin kit (KIT-CD-PIN-) Description Quantity Bracket pin Bracket bushing Cotter pin, /" x " Bracket retainer pin Lock pin kit for 00 (KIT-CD-LOCKPIN) Lock pin kit for 00 (KIT-CD-LOCKPIN) Description Quantity 0 Lock pin Hair pin cotter Chain Rebuild Rebuild kit (KIT-RPR-S00) Description Quantity Jaw spring Cotter pin, /" x " Pull handle spring set Bushing, /" Hex head flanged bolt, nut Flat head socket, /"- x -/", grade Jaw and wedge set Bushing Flat washer, /", plain Hex lock nut, /" -, grade "B" Cotter pin, /" x " Flat washer /", plain Clevis pin, /" x " Wedge-stop rod guide Custom Duty Service Parts SLCDFM0.. CD00 with bracket for stationary mounting (some welding required) CDAWB0.. CD00 with a." air slide bracket and " slide rail SLTPLCD00-D.. CD00 replacement fifth wheel top plate BKTCD... Bracket for the SLCDFM0 KIT-CD-PIN-.. Pin and Bushing kit CD-BSH-... Bushing kit (pair) CDBKTAWBPT... CD air slide bracket." height CDSLRB... " CD side rail CYL-COMP... AWB air cylinder KITRPRAWB... Locking wedge (pair) 0 Replace SLTPCD00-D (Driver side release) CDAWB0 Complete Assembly

Pin and Bushing Kits Bracket Pin and Bushing Kits Bracket pin kit (KIT-PIN-LLB) -piece bushing Pairs Bushing Kits Bracket pin Bracket retainer pin Bushing kit (BSH-LLB) Cotter pin Bracket liner Bracket pin kit (KIT-PIN-) -piece bushing Pairs Bracket liner -piece bushing Bracket pin Bracket retainer pin Cotter pin Bushing kit (BSH-0) Bracket pin kit (KIT-PIN-UNT) Bracket pin kit (KIT-PIN-000) -piece bushing Bracket pin Bracket retainer pin Cotter pin Bracket Liner Bracket liners -piece bushing Bracket pin Bracket retainer pin Cotter pin Bushing kit (BSH-000) -piece bushing -piece bushing Bracket liners Bracket Pin and Bushing Kit Guide Top Plate Mount Top Plate Bracket Pin Kit Bushing Kit Sliding Brackets ATB 000, 000, 000CC KIT-PIN-LLB BSH-LLB AWB 000, H0, H KIT-PIN- BSH-0 AWB Blocked BLAWB 000, H0, H KIT-PIN- BSH-0 AWX H0, H KIT-PIN-XHD BSH-0 LWB 000, 000, 000CC KIT-PIN-LLB BSH-LLB LWO NT, 000 KIT-PIN-UNT* BSH-000 MTB 000, 000, 000CC KIT-PIN-LLB BSH-LLB MWS H0, H KIT-PIN- BSH-0 NWB 000 KIT-PIN-LLB BSH-LLB XPSA X0 KIT-PIN-XHD BSH-0 ASB NT, 000 KIT-PIN-000 BSH-000 Top Plate Mount Top Plate Bracket Pin Kit Bushing Kit Fixed Mount/Plate Mount APB NT, 000 KIT-PIN-UNT* BSH-000 BSL 000, 000, 000CC KIT-PIN-LLB BSH-LLB BSM 000, 000, 000CC KIT-PIN-LLB BSH-LLB FMA 000, 000, 000CC KIT-PIN- BSH-0 FMA D 000, 000, 000CC KIT-PIN- BSH-0 PMA 000, 000, 000CC KIT-PIN-LLB BSH-LLB PML 000, 000, 000CC KIT-PIN-LLB BSH-LLB PSA H0, H KIT-PIN- BSH-0 PS H0, H KIT-PIN- BSH-0 PS Blocked (BLPS) H0, H KIT-PIN- BSH-0 SMB NT, 000 KIT-PIN-UNT* BSH-000 XPSA X0 KIT-PIN-XHD BSH-0 *If 000 Series top plate on the bracket or slide, use KIT-PIN-000. 00--0 partsfpc@fifthwheel.com www.fifthwheel.com

NWB Light Weight Standard duty air slide bracket and rails New Innovation Repair Bracket pin kit (KIT-PIN-LLB) Description Lower bracket bushing Upper bracket bushing Bracket pin Bracket retainer pin Cotter pin Bracket liner Rebuild Rebuild kit (KITRXNWB) Description /" x -/" screw Spacer bushing /" washer /" hex lock nut /" x -/" hex bolt Locking wedge Spring Linkage Composite Air Cylinder Replace Cylinder kit (CYLNWB) Description Spacer bushing /" Grade C hex lock nut /" x -/" hex bolt Composite Air Cylinder Bushing kit (BSH-LLB) Lower bracket bushing Upper bracket bushing Bracket liner Air slide bracket Mounted Part Number Height* BKTNWBPT -/" BKTNWBT -/" BKTNWBPT -/" *Height is measured from top of truck frame to top of fifth wheel Repair kit (KITRPRNWB) /" x -/" screw Spacer bushing /" washer /" hex lock nut Spring Locking wedge Bracket not included in kit Bracket comes assembled Slide rails Slide Overall Part Number Travel Length SLRNWB- " " SLRNWB- " " SLRNWB- " " 00--0 partsfpc@fifthwheel.com www.fifthwheel.com

LWB Light Weight Standard duty air slide bracket and rails Repair Bracket pin kit (KIT-PIN-LLB) Description Lower bracket bushing Upper bracket bushing Bracket pin Bracket retainer pin Cotter pin Bracket liner Bushing kit (BSH-LLB) Lower bracket bushing Upper bracket bushing Bracket liner Rebuild Rebuild kit (KITRXLWB) Description Flat head bolt, /"- x -/" Spacer bushing Bushing Flat washer, /" I.D., -/" O.D., plain Hex nut lock, /- Hex nut, lock /"-, low profile Flat washer, /" I.D.," O.D., plain Hex head bolt, /"-x-/, grade Hex head bolt, / x -/, grade 0 Linkage, LWB Locking wedge, left Locking wedge, right Air cylinder Spring Washer, / Type A. Washer, / Type A. Replace Cylinder kit (CYLLWB) Description Bushing Hex nut, lock /"-, low profile Hex head bolt, / x -/, grade 0 Linkage, LWB Composite Air Cylinder 0 0 Air slide bracket Mounted Part Number Height BKTLWBPT -/" BKTLWBPT -/" BKTLWBPT -/" BKTLWBPT -/" BKTLWB0PT 0-/" *Height is measured from top of truck frame to top of fifth wheel Repair kit (KITRPRLWB) Spacer bushing Flat washer, /" I.D., -/" O.D., plain Hex nut lock, /- Flat washer, /" I.D.," O.D., plain Hex head bolt, / x -/, grade Locking wedge, left Locking wedge, right Spring 0 0 00--0 partsfpc@fifthwheel.com www.fifthwheel.com Bracket not included in kit Bracket comes assembled Slide rails Slide Overall Part Number Travel Length SLRLWB- " " SLRLWB- " " SLRLWB- " " SLRLWB- " " SLRLWB- " "

LWO Light Weight Standard duty air slide bracket and rails Repair Bracket pin kit (KIT-PIN-000) Bracket liners -piece bushing Bracket pin Bracket retainer pin Cotter pin Replace Cylinder kit (CYL-LWO-LWI) Description Spacer Bushing /- x." Hex Bolt Lock Nut, /- Composite Air Cylinder Bushing kit (BSH-000) Bracket liners -piece bushing Air slide bracket Mounted Part Number Height* BKTLWOPT -/" BKTLWOPT -/" BKTLWOPT -/" *Height is measured from top of truck frame to top of fifth wheel Repair Kit (KIT-LOC-LWO) /- x.00 Hex Bolt / Washer Spacer Bushing /- x." Hex Bolt Locking Wedge Lock Nut /" Bracket comes assembled Slide rails Slide Overall s Part Number Travel Length SLRLWO- " " SLRLWO- " " SLRLWO- " " SLRLWO- " " SLRLWO- " " Bracket not included in kit 00--0 partsfpc@fifthwheel.com www.fifthwheel.com

ATB Standard duty air slide bracket and rails Repair Bracket pin kit (KIT-PIN-LLB) Description Lower bracket bushing Upper bracket bushing Bracket pin Bracket retainer pin Cotter pin Bracket liner Bushing kit (BSH-LLB) Lower bracket bushing Upper bracket bushing Bracket liner Repair kit (KITRPRATB) Flat head socket, /" - x " Hex jam nut, /" -, NY Flat washer, /" Type A,. Spacer bushing Locking wedge, slide assembly Locking member spring Rebuild Rebuild kit (KITRXATB) Description Spacer bushing Flat head socket, /" - x -/" Flat head socket, /" - x " Hex head bolt, /" - x " Hex jam nut, /" -, NY Hex lock nut, /" -, grade "C" Flat washer, /" Type A,. Spacer bushing Pull bar, slide bracket 0 Pull bar, slide bracket Latching lever Composite Air Cylinder Locking wedge, slide assembly Locking member spring 0 Bracket not included in kit Replace Cylinder kit (CYL-COMP) Description 0 Composite Air Cylinder Flat head socket, /" - x -/", grade Flat washer, /" I.D., -/" O.D., plain Hex lock nut, /" -, grade "C" Bushing, /" 0 Reuse Hex bolt Air slide bracket Mounted Part Number Height* BKTATBPT -/" BKTATBPT -/" BKTATBPT -/" BKTATBPT -/" BKTATB0PT 0-/" *Height is measured from top of truck frame to top of fifth wheel Bracket comes assembled Slide rails Slide Overall Part Number Travel Length SLRTB " 0" SLRTB " " SLRTB " " SLRTB " " SLRTB " " 00--0 partsfpc@fifthwheel.com www.fifthwheel.com

AWB Heavy duty air slide bracket and rails Repair Bracket pin and bushing kit (KIT-PIN-) -piece bushing Bracket pin Bracket retainer pin Cotter pin Bushing kit (BSH-0) -piece bushing Rebuild Rebuild kit (KITRXAWB) Description Spacer bushing B Flat head socket, /" - x ", grade Flat head socket, /" - x ", grade Hex head bolt, /" - x.", grade Hex jam nut, /" -, NY Hex lock nut, /" -, grade "C" Flat washer, /" I.D.,. Type A Spacer bushing Pull bar slide bracket 0 Locking wedge slide assembly Pull bar slide bracket Latching Lever Composite Air Cylinder Locking member spring Replace Cylinder kit (CYL-COMP) Description Spacer bushing Composite Air Cylinder Flat head socket, /" - x -/", grade Flat washer, /" I.D.,. Type A Hex lock nut, /" -, grade "C" 0 Reuse Hex bolt Air slide bracket Mounted Part Number Height* BKTAWBPT -/" BKTAWBPT -/" BKTAWBPT -/" BKTAWBPT -/" BKTAWB0PT 0-/" *Height is measured from top of truck frame to top of fifth wheel Repair kit (KITRPRAWB) Flat head socket, /" - x ", grade Hex jam nut, /" -, NY Flat washer, /" I.D.,. Type A Spacer bushing 0 Locking wedge slide assembly 0 0 0 0 Bracket comes assembled Slide rails Slide Overall Part Number Travel Length SLRB " " SLRB " " SLRB " " SLRB " " SLRB " " 00--0 partsfpc@fifthwheel.com www.fifthwheel.com

AWX Extra heavy duty air slide bracket and rails Repair Bracket pin and bushing kit (KIT-PIN-XHD) Description -piece bushing Bracket pin Bracket retainer pin Cotter pin Repair kit (KITRPRAWB) required for AWX Flat head socket, /" - x ", grade Hex jam nut, /" -, NY Flat washer, /" I.D.,. Type A Spacer bushing 0 Locking wedge slide assembly 0 To repair use two KITRPRAWB for double locks 0 Replace Cylinder kit (CYL-XAWX) Description Bushing, /" Hex Bolt, /"- X " Hex Bolt, /"- X." Hex jam nut, /" -, grade "B" Hex lock nut, /" -, grade "C" Washer /" XHD Air Cylinder Slide bracket Mounted Mounted Part Number Height 0* Height H* BKTAWXPT -/" -/" BKTAWX0PT 0-/" -/" BKTAWXPT -/" 0-/" *Height is measured from top of truck frame to top of fifth wheel Bracket comes assembled Slide rails Slide Overall Part Number Travel Length SLRX " " SLRX " " SLRX " " SLRX " 0" 0 00--0 partsfpc@fifthwheel.com www.fifthwheel.com

Fixed and Angled Mounts FMA fixed mount FMA mounts (pairs) Part Number. Mounted height BKTFMA...-/ BKTFMA...-/ BKTFMA...-/ BKTFMA...-/ BKTFMA0...0-/ Compatible Plates SLTPL000 SLTPL000 SLTPL000CC Repair kits for FMA Pins and bushings. KIT-PIN- Bushings... BSH-0 FMA models can be identified by the bolt pattern. FMA-D fixed mount FMA mounts (pairs) Part Number. Mounted height BKTFMA-D*.. -/ BKTFMA-D*.. -/ BKTFMA-D... -/ BKTFMA-D... -/ BKTFMA0-D...0-/ Compatible Plates SLTPL000 SLTPL000 SLTPL000CC Repair kits for FMA Pins and bushings. KIT-PIN- Bushings... BSH-0 * BKTFMA-D and BKTPLT brackets are used with 000, 000 & 000CC top plates only and include front rocker limit blocks (example BKTFMA). BKTFMA and BKTPLT brackets (example BKTFMA) do not have front rocker limit blocks. FMA-D models can be identified by the bolt pattern. BSL welded fixed mount BSL mounts (pairs) Part number Mounted height BKTBSL...-/" BKTBSL...-/" BKTBSL...-/" BKTBSL...-/" BKTBSL...-/" BKTBSL...-/" Compatible Plates SLTPL000 SLTPL000 SLTPL000CC Note: Some welding required. Repair kits for BSL Pins, bushings and bracket liners..kit-pin-llb Bushings...BSH-LLB 00--0 partsfpc@fifthwheel.com www.fifthwheel.com

Plate Mounts PML plate mount PML mounts Part # Mounted height ASYPML0...-/" ASYPML0...-/" ASYPML0...-/" ASYPML0...-/" ASYPML00..0-/" Compatible Plates SLTPL000 SLTPL000 SLTPL000CC Repair kits for PML Pins, bushings and bracket liners...kit-pin-llb Bushings...BSH-LLB APB plate mount APB mounts Part # Mounted height ASYAPB0...-/" ASYAPB0...-/" ASYAPB0...-/" Compatible Plates SLTPLUNT Repair Kits for APB Pins and bushings...kit-pin-000 Bushings...BSH-000 PS plate mount Mounting brackets Part # Mounted height BKTPLT... -/" BKTPLT... -/" BKTPLT... -/" BKTPLT0...0-/" BKTPLT...-/" Note: To order, specify a mounting plate and mounting brackets. Both are required. Compatible Plates SLTPL000 SLTPL000 SLTPL000CC SLTPLH0 SLTPLX0 SLTPLH Mount Description Width x length Holes per side Repair kits for PS Pins and bushings. KIT-PIN- Bushings... BSH-0 Hole spacing across frame PLT PS Plate short 0.00" x." (for /" hardware) "." " " " First hole measured from rear, then spacing between holes.",.00" -.00" -.00" -.00" Outboard Mounting Angles Mounting angles /" x " x " (ATB, AWB, LWB, NWB, PML, LWO, PS) Part Number Inches/ Millimeters Angle Length Weight Truck Frame Width Up to "." (mm) to ANGPB " (,mm) lbs (kg) (0mm)." (0mm) ANGP - indicates the angle can be cut to fit an appropriate side rail length. " overall width=" slide rail length. " overall length =" side rail length, and " overall length=" side rail length. " 00--0 partsfpc@fifthwheel.com www.fifthwheel.com

BLHAWB blocked air slide fifth wheels (Tilt/No-Tilt Option) Part Number Mounted Height* Description BLHAWBPT...-/".. Blocked H top plate with Blocked AWB bracket BLHAWBPT...-/".. Blocked H top plate with Blocked AWB bracket BLHAWBPT...-/".. Blocked H top plate with Blocked AWB bracket BLHAWB0PT..0-/".. Blocked H top plate with Blocked AWB bracket Note: Does not include slide rails. Blocked (No-Tilt) Fifth Wheels Blocked Complete Assemblies H Fifth Blocked AWB Wheel Part Number Height* Slide Length Weight BLHAWB0 " 0 lbs BLHAWB0 " 0 lbs BLHAWB0 -/" " lbs BLHAWB0 " lbs BLHAWB0 " lbs BLHAWB0 " lbs BLHAWB0 " lbs BLHAWB0 -/" " lbs BLHAWB0 " lbs BLHAWB0 " lbs H Blocked AWB Part Number BLHAWB0 Fifth Wheel Height Slide Length Weight " 0 lbs BLHAWB0 " lbs BLHAWB0 -/" " 0 lbs BLHAWB0 " 0 lbs BLHAWB0 " lbs BLHAWB00 " lbs BLHAWB00 " lbs BLHAWB00 0-/" " lbs BLHAWB00 " lbs BLHAWB00 " 0 lbs Removing blocking bar converts No-Tilt blocked fifth wheel to standard fifth wheel that can tilt. BLHPS blocked plate mount fifth wheels (Tilt/No-Tilt Option) Part Number Mounted Height* Description BLHPS...-/"...Blocked H top plate with Blocked PS bracket BLHPS...-/"...Blocked H top plate with Blocked PS bracket BLHPS0.. 0-/"...Blocked H top plate with Blocked PS bracket Mount Description Width x length Holes per side Hole spacing across frame BLPS Plate short 0.00" x." (for /" hardware) " First hole measured from rear, then spacing between holes.",.00" -.00" -.00" -.00" Removing blocking bar converts No-Tilt blocked fifth wheel to standard fifth wheel that can tilt. Kits and parts for blocked fifth wheels Blocking Kits (For AWB Brackets) Blocking kit for H0 top plate and BLHAWB bracket.... KIT-BLK-SLD Note: The bracket height must be /" for AWB. Kit must be installed by a certified welder. See TB-00 for installation instructions. Replacement Bar (For AWB and PS Brackets) Replacement bar for Blocked H0 and H top plate.... BAR--BK (For BLHAWB, BLHMWS and BLHPSA brackets) 00--0 partsfpc@fifthwheel.com www.fifthwheel.com

Important Application Notes Top plate selection notes: For fifth wheel top plate selection guide see page. Air activated release styles are available on select models. Mount selection notes: A sliding mount gives the owner more options. You can transfer weight between tractor axles, handle trailers with different kingpin settings, and vary vehicle combination lengths. A sliding mount fifth wheel also provides additional maneuverability, accommodates trailers with short landing gear clearance and allows the driver to extend the unit for maximum comfort when weight allows. If you choose a sliding mount, Fontaine offers a wide selection of slide lengths. Stationary mount fifth wheels (plate or angle mounts) are an option and are ideal for applications where the trailer kingpin setting, axle loading and vehicle length all remain the same for the entire fleet. Stationary mount fifth wheels are usually lighter than sliding mount fifth wheels. Important application notes: If any single restriction factor within your application is surpassed within a given duty level, the next duty level must be selected. For more information on standard, moderate and severe duty, please review the duty class restrictions on page. When selecting a fifth wheel, if the application or vehicle usage places the maximum capacity on a certain fifth wheel, then the selection of a fifth wheel with a higher capacity is advised. For example, a tractor that is at a maximum vertical load of 0,000 lbs in a moderate duty application should be using a fifth wheel with a vertical load capacity of,000 lbs or greater. This additional capacity should give better service life over a longer period of time. Special applications: All logging, mining and oil field applications are considered severe duty. Do not select assemblies in the standard or moderate levels when a special application is designated. Minimum static load warning: Minimum static load warning!!! The trailer that is attached to the fifth wheel should impose a consistent vertical load. Repeated negative loading (trying to pull the fifth wheel off of the brackets with the kingpin) is not allowed. A minimum static load applied to the fifth wheel through the trailer is 0% of the gross trailer weight. See the load rating for the specific fifth wheel for maximum vertical load values. Van trailers Tankers and bulk trailers Flatbeds, stretch and stake trailers Lowbed trailers Framed end and frameless dump trailers Important: Contact your OEM or Fontaine Fifth Wheel for more information on the right fifth wheel for your application. Please refer to the Fontaine Fifth Wheel warranty statement for important warranty information. Selecting assemblies in conflict with this application guide without prior written approval from Fontaine engineering voids all warranties. A copy of the Fontaine service handbook is available at www.fifthwheel.com. Click "Support" and then "Helpful information". 00--0 partsfpc@fifthwheel.com www.fifthwheel.com

Inspect top plate (degrease if necessary). Lubricate grease channels in the top plate using a lithium complex lubricant, suitable for use in high pressure applications, such as: Nanomech: Ultra Red Trucking Grease, Mobil: XHP 0 Mine, XHP Mine or equivalent (all models except Clean Connect ) WARNING! Do not use an aftermarket lube plate (high density polyethylene) or grease packets on top of the fifth wheel or kingpin bolster plate in lieu of grease without prior approval by Fontaine. Lubrication Instructions No-Slack 000, 000, 000CC, NT and H Remove any old grease from the jaw, wedge and the throat area of the fifth wheel, then close the lock and grease the jaw and wedge (all models) Trip the locking mechanism with a pry bar by pushing the bumper off its seat. Keep hands out of the fifth wheel throat. Bumper Wedge Throat Area above Stationary Jaw Stationary Jaw Jaw Lubricate the top plate surface with a thin layer of grease leave area around jaw and wedge free of grease (skip this step for the 000CC Clean Connect model). Separate the jaw and wedge with a screw driver and press the recommended lubricant between the serrated surfaces. Work the pull-handle back and forth to spread the lube over all surfaces. Also grease the Stationary Jaw and the Throat Area above the Stationary Jaw. Grease mounting brackets (Skip this step for "LUBE FREE" models with bracket liner models) Pry up top plate for best results Grease all zerks (both sides) Note: For illustration purposes, red lubricant is used in these photos to show proper coverage. Your grease may have a different color. Grease the mounting brackets. Lift the top plate up with a pry bar to ensure grease gets to the top of the brackets. (Inspect mounting bracket base, and if "LUBE FREE" is cast into the bracket skip this step. These models have bracket liners and do not require lubrication. In this case inspect linings for wear). In cold weather applications please refer to page. Over-lubrication is costly and causes excessive build-up on fifth wheel components leading to lost revenue. 00--0 partsfpc@fifthwheel.com www.fifthwheel.com

Jaw & Wedge Adjustment No-Slack 000, 000, 000CC, NT and H Insert test kingpin into fifth wheel throat to activate the lock Verify fifth wheel lock is activated Pull handle Handle closed within " Skirt Lock open Insert a dimensionally correct test kingpin tool into the throat of the fifth wheel. Carefully push the kingpin in until the locking mechanism is activated. Keep your hands out of the fifth wheel throat. Verify that the pull handle is in the fully locked position (within " of the fifth wheel skirt). Adjust wedge stop rod Lock closed /" travel Wedge Stop Rod IMPORTANT: Fontaine Training Videos are a great resource that can save time and improve the efficiency of your business. Subjects cover rebuilding a fifth wheel, coupling and uncoupling, maintenance and more. Check them out at http://www.fifthwheel.com/fifth-wheel-videos.html or scan this QR code with your mobile device. Check the travel of the wedge stop rod by pushing in on it. It should move in /" with hand pressure and then spring back out. To obtain a proper setting, turn the wedge stop rod clockwise to reduce the gap and counter-clockwise to increase it. Adjust until the free travel is /". Hint: If necessary, tap the wedge stop rod with a hammer to release a tight wedge. 00--0 partsfpc@fifthwheel.com www.fifthwheel.com

Note: Cold Weather Maintenance No-Slack 000, 000, 000CC, NT and H Lubricate top plate and locking mechanism. Special precautions should be taken during extreme cold weather to ensure that the fifth wheel locking mechanism operates freely. At low temperatures ice and sludge can build up, and lubricants can become thick and binding. If you are in a region that experiences extreme and/or prolonged freezing temperatures (below 0 F) a thorough cleaning and de-greasing of the fifth wheel should be performed followed by lubrication with a less viscous lubricant. Following is the recommended cold weather procedure. (Refer to LT-0 for lubricating instructions under normal conditions). WARNING! You should never attempt to couple a fifth wheel that has snow, ice, or debris in the throat area. Improper coupling can occur possibly resulting in serious injury or death. Ordinarily Fontaine recommends that a moly based lubricant (XHP 0/ or equivalent) be used to lubricate a fifth wheel (see LT-0 for lubricating instructions). However, in extreme cold conditions a less viscous lubricant should be used, such as: O-weight oil, diesel fuel, kerosene, motor oil, etc. (unless prohibited by government regulations). This will help ensure proper movement and lubrication of the locking mechanism in extreme cold weather. This less viscous lubricant can be distributed using a spray bottle. Be sure to spray the top surface of the fifth wheel and all moving components including the pull handle, throat area (jaw and wedge) and secondary lock. Fontaine recommends that you contact your specific lubricant manufacturer for guidelines on mixing compatibility of any lubricant. After application of fresh lubricant, open and close the lock several times to make sure that it is operating freely. Remove all snow, ice and debris from the fifth wheel especially focusing on the throat area; and remove all hardened lubricants that bind the locking mechanism. Close the lock using a pry bar Close the lock by inserting a pry bar into the throat of the fifth wheel to activate the trigger mechanism. Keep hands out of the fifth wheel throat. Move the handle back and forth several times without fully engaging the lock to distribute the fresh lubricant. Move pull-handle back and forth to distribute lube 00--0 partsfpc@fifthwheel.com www.fifthwheel.com

We make it EASY Fontaine s legendary customer support is unmatched in the aftermarket. We are your fifth wheel experts: providing cost-cutting training; How-To videos; printed materials; digital materials... whatever it takes to help you find the fifth wheel information you need quickly and easily. Chat at www.fifthwheel.com Easy Model# or Serial# lookup How-To Videos and Training Mobile App Coming Soon Demand only GENUINE Fontaine fifth wheels. Will fit top plates simply do not give you the No-Slack advantage. Helpful On-Line Information Scan these links, or go to fifthwheel.com/partsconnection/ How to select fifth wheel Choose "Support" menu Then "Choosing the right fifth wheel" Troubleshooting Choose "Support" menu Then "Troubleshooting flow charts" SLTPL000 New LOWER PRICE on genuine Fontaine No-Slack lock Buy only the best... Don t settle for less! Operation and Maintenance Videos Choose "Video" menu Then "No-Slack" Helpful Documents Choose "Support" menu Then "Helpful information" 0 Fontaine Fifth Wheel LT--R July 0 www.fifthwheel.com 00--0 PartsFPC@fifthwheel.com FontainePartsConnection @FifthWheelParts