CHROME FRONT END 166 BRAKE COVERS 170 ENGINE 174 REAR END 180 LICENSE PLATES 187

CHROME FRONT END 166 BRAKE COVERS 170 ENGINE 174 REAR END 180 LICENSE PLATES 187

FRONT END deco eagle fender ornament True vintage styling of the 40 s & 50 s! Light weight ABS design & simple peel-&-stick application will have you back on the road in no time! Fits: Universal: Front Fenders with approximately 15-1/4" Radius Curve Honda: VTX1800C/F, VTX1300C, Fury, VT1300 Custom Line Kawasaki: Vulcan 1700 Models, Voyager & Vulcan 900 Models Yamaha: V Star 650, 950, 1300 Models & Road Star Models (Not for Roadliner, Stratoliner or Raider) 7333 Deco Eagle Fender Ornament (ea) Front Fender Spear Patent Pending Add a stunning little sparkle of chrome to your fender & catch everyone s attention! Simply peel-&-stick! Measures 1-1/4" Wide x 8" Long. Fits: Universal: Front Fenders with approximately 15-1/4" Radius Curve Honda: VTX1800C/F, VTX1300C, Fury, VT1300 Custom Line Kawasaki: Vulcan 1700 Models, Voyager & Vulcan 900 Models Yamaha: V Star 650, 950, 1300 Models & Road Star Models (Not for Roadliner, Stratoliner or Raider) 7332 Front Fender Spear (ea) 24.99 make a bold statement! 7340 9026 9022 7344 triceptor fender accent You decide where it looks best - as a tip or top fender accent. Peel-&-stick installation quickly adds some sparkle & covers unsightly stone chips. Fits: Honda: All VTX1300/1800 & VT1300 Custom Line Yamaha: All V Star 1300/1100/650, all Road Star, all Roadliner/Stratoliner, & Raider Universal: 4 or wider style fenders (does not fit fenders with flat center width) front fender tip Protection & style for your front fender. Add this chrome accent & avoid or cover those ugly stone chips. With peel-&-stick installation, embellish the contours of your front fender quickly & painlessly. Fits: Honda: All VTX1800C/F, all VTX1300C & VT1300 Custom Line Yamaha: All V Star 1300/1100/650, all Road Star, & all Roadliner/Stratoliner & Deluxe Universal: 6 or wider style fenders (does not fit fenders with flat center width) fender ornaments Let your front fender take on new life with one of our majestically sculpted fender ornaments. Fits: Universal applications require drilling holes in fender & hard wiring for installation 9022 Wild Boar (ea) 9026 Eagle (ea) 3103 Replacement Bulb, #161 (ea) 59.99 49.99 1.99 7340 Triceptor Fender Accent (ea) 42.99 7344 Front Fender Tip (ea) 32.99 166 W W W. K U R Y A K Y N. C O M

8684 BIKE MAPS 8684 GOLDWING 7823 CAN-AM SPORT BIKE 7823 Caliper Cover pg 170 LIGHTING brake line accent covers for vtx1800 Cover those bare stamped brackets holding your front brake lines to the forks with some blood grooved chrome. Fits: All '02-'08 VTX1800 Models 7823 Brake Line Accent Covers (pr) stiletto axle caps for vtx lower fork skins for vtx1800 Create a shining first impression! Whether parked or in motion, your front end is often the first thing people notice on your bike. Show it in it s best light with these attention grabbing chrome Lower Fork Skins. Used alone or with our other chromed front end components, they will reflect well on you & your VTX. Fits: All 02 08 VTX1800 Models 8684 Lower Fork Skins (pr) For those with Stiletto ISO-Grip End Caps, here s an opportunity to make a stronger statement. Stiletto Axle Caps fit up closely to the sliders with no unsightly gaps. Fits: All VTX1300/1800 Models 1207 Stiletto Axle Caps (pr) 89.99 1 ACCESSORY MOUNTS HANDLEBAR FOOT CHROME LUGGAGE Note: Will not install with Küryakyn Lower Fork Skins. spun blade spinning axle caps Reminiscent of the great Mustang fighter planes, these spinning blades give the illusion of flight. The chrome-plated ABS blades start to spin when the bike reaches about 25 mph. An easy, innovative way to add some additional cool factor to your bike. Fits: All VTX1300/1800 Models TOURING AIR CLEANERS MISC 1239 Spun Blade Spinning Axle Caps (pr) 119.99 Note: Will not install with Küryakyn Lower Fork Skins. INDEX 8 6 6. 2 7 7. 9 5 9 8 167

neck cover for v star 1100 A stunning replacement for the dull, stock, black components found on your bike. The chrome-plated contours have been smoothed & molded to provide a flowing appearance. The right side cover has a stylized teardrop shaped boss that surrounds the ignition switch & leaves just its outer surface exposed. Simple installation. Fits: All 99-09 V Star 1100 Models 7856 Neck Cover (set) 79.99 headlight visor Long, lean, & mean! That s the illusion your stock headlight shell will get by adding this slick Headlight Visor. Features a nicely finished rolled front edge with center bullet - a big difference that will be noticed immediately. Fastens securely to your existing headlight for easy installation! Fits: All 99-12 Road Star Models (except Warrior), all 98-10 V Star 650 Classic & '99-'09 V Star 1100 Classic Models with 7" headlamp 2182 Headlight Visor (ea) 32.99 chrome fork protector covers for raider When styling choices for your Raider reach a fork in the road, keep this in mind; chrome always looks better than plain black plastic! The stock black fork protectors are difficult & time consuming to remove but they do help shield against nicks & scratches. These peel-&-stick chrome covers provide a classy custom appearance while keeping the protection the factory intended in place. Fits: All 08-12 Yamaha Raider Models 8699 Chrome Fork Protector Covers (pr) 4015 speedometer visor Easily affixes to the speedometer. Besides the sleek appearance, you ll really appreciate the reduction in glare if you run a windshield! 4016 4016 REAR END CHROME FOR YOUR RAIDER! - PG 184 4015 Speedo/Tach Visor (ea) Fits: Honda: 02-06 VTX1800C, All 250 Rebel, Shadow 1100 with Round Speedo on handlebars measuring 3-3/4 Victory: All '04-'12 Models (Jackpot, Kingpin, Vegas, Hammer) with digital gauge (except Vision) Universal: Speedometers & tachometers 3-3/4 diameter with 7/16 of exposed bezel/sidewall 4016 Speedo/Tach Visor (ea) Fits: Speedometers & tachometers 3-1/4 diameter with 1/8 of exposed bezel/sidewall 26.99 25.99 168 W W W. K U R Y A K Y N. C O M

BIKE MAPS GOLDWING 8680 D D 8680 CAN-AM SPORT BIKE LIGHTING 8681 D B A C ACCESSORY MOUNTS HANDLEBAR FOOT A. neck cover for valkyrie This beautifully chromed delta-shaped cover neatly hides the front tank tab & neck top. Stainless steel mounting hardware is included to complete this easy installation. Fits: All 97-04 Valkyrie Models (except Rune) 7855 Chrome Neck Cover 29.99 for Valkyrie (ea) C. handlebar riser accents for m109r Most people agree, this Cruiser is one of the greatest available. It doesn t need much but these easy stick-on chrome Riser Accents sure make a difference. Fits: 06-12 Suzuki M109R Models 8682 Handlebar Riser Accents (pr) 41.99 CHROME LUGGAGE B. fender louvers for VTX Your VTX Retro fender is classy but it cries out for these precision fitting molded chrome inserts - by far the finest available! Don t confuse ours with other ill-fitting, poor quality versions out there Fits: All 03-09 VTX1300 Retro/S/T & all 02-08 VTX1800 Retro/S/T Models 9018 Front Fender Louvers (set) 32.99 9019 Rear Fender Louvers (set) 32.99 D. triple tree cover set for vtx This is the ultimate front end dress-up kit for the VTX. We offer a 5-piece set that includes a one-piece cover for the top triple clamp, chrome fork tube caps, & covers for the lower triple clamp for the VTX1800C. We offer a 3-piece set that includes a one-piece cover for the top triple clamp & a pair of die-cast fork tube caps for the VTX1300. This kit provides the look of a custom chrome replacement triple tree set at a fraction of the cost & with significantly less work! 8680 Upper & Lower Triple Tree Cover Set (pr) 59.99 Fits: 02-08 VTX1800C/F 8681 Upper Triple Tree Cover (ea) 59.99 Fits: 03-09 VTX1300R/S/T/C Note: Requires removal of handlebar/riser assembly & headlight mount during installation. TOURING AIR CLEANERS MISC INDEX 8 6 6. 2 7 7. 9 5 9 8 169

BRAKE COVERS 7821 7820 front caliper cover for honda Details make the difference! In just a few minutes your front brake caliper can spring to life with this brilliant chrome cover. Styled to complement the Rear Caliper Cover, the pair provides a balanced, integrated look. Installation is a snap with high strength peel-&-stick adhesive. 1282 Fits: All 03 09 VTX1300 Retro/S/T Models & '08-'12 Shadow 750 Aero Models (ea) 1284 Fits: All 03 09 VTX1300C Models & '08-'12 Shadow 750 Spirit/ Phantom Models (ea) brake component dress-up kit for honda & kawasaki All kits include a replacement fluid reservoir cap & a wrap-around reservoir cover. The kit for the VTX1800C/F also places a streamlined cover on the master cylinder. All components feature a dazzling chrome finish. 7820 Brake Dress-Up Kit (ea) Fits: 02-08 VTX1800C/F 7821 Brake Dress-Up Kit (ea) Fits: 03-08 VTX1800 Retro/S/T/N, all '09-'12 Fury Models & '10-'12 VT1300 Custom Line (Sabre, Stateline & Interstate) 7822 Brake Reservoir Cap (cap only) Fits: Honda: '03-'09 VTX1300, '02-'08 VTX1800 Kawasaki: '02-'08 Mean Streak, '03-'08 1600 Classic & Nomad, '11-'12 Vaquero 1700 29.99 21.99 front caliper covers for yamaha This bold design evokes the look of a high performance six piston brake caliper. With multiple cutouts, keep the look light or install the black back plate & cover everything up. Installs with high strength peel-&-stick adhesive. Fits: All 06-12 Roadliner, Stratoliner & Deluxe Models, all 04-12 Road Star 1700 Models (except Warrior), & all '08-'12 Raider Models 8701 Front Caliper Covers (set) 69.99 1294 7825 caliper cover This wicked looking cover installs in minutes. No tools required. 1294 Fits: Kawasaki: All Vulcan 900/1500/1600 Suzuki: 800 Volusia/Boulevard C50/M50 Yamaha: V Star 1100/1300, Stryker & Royal Star Venture (ea) rear master cylinder cover for yamaha 20.99 Get a clean finished look in minutes. Fits: All 99-12 Road Star 1600/1700 Models (except Warrior), & '09 -'12 V Star 950 7825 Rear Master Cylinder Covers (ea) 31.99 1298 front caliper covers for vtx1800 Perk up that front end by adding these super easy to install chrome Caliper Covers. Fits: All 03-08 VTX1800 Models (except Early 03 & 07-08 Models or other Models with caliper bleeder screw between brake line fittings) 1298 Caliper Covers for VTX1800 (pr) 49.99 170 W W W. K U R Y A K Y N. C O M

1289 BIKE MAPS 1299 rear caliper cover Finish off that rear brake with our pure custom looking Rear Caliper Cover. You won t believe the difference! GOLDWING CAN-AM 1299 Rear Brake Caliper Cover (ea) Fits: 02-08 Honda VTX1800 Models 1289 Rear Caliper Cover (ea) Fits: 06-12 Suzuki M109R Models 29.99 SPORT BIKE rear caliper cover for kawasaki & suzuki Styled to imply speed & motion, our Rear Caliper Cover creates a powerful high-tech look. The rich chrome finish adds a bright spot to the rear wheel area & is much easier to keep clean than the stock finish. Installation is simple & quick with high strength peel-&-stick adhesive. Fits: Kawasaki: All 06-12 Vulcan 900 Models, all 03-08 Vulcan 1600 Models, all 04 10 Vulcan 2000 Models, all Vulcan 1600 Mean Streak, all 02 08 Vulcan 1500, & all '09-'12 Vulcan 1700 Classic Suzuki: All 06 12 M109 Models, all 08-09 C109 & 09 M90 Models LIGHTING ACCESSORY MOUNTS HANDLEBAR 1283 Rear Caliper Cover (ea) FOOT 13/16" W x 1-3/8 T 1231 2013 2015 brake bleeder screw cover & banjo bolt cover Easily installed, these pieces provide a nice detail when dressing up brake calipers & master cylinders on Cruisers. rear brake caliper cover for vtx1300 Flow chrome over that Rear Brake Caliper & make it sparkle! Easy installation. Fits: All 03-09 VTX1300 Models 1288 Rear Brake Caliper Cover (ea) CHROME LUGGAGE TOURING 2013 Bleeder Screw Covers (pr) 2015 Banjo Bolt Cover (ea) Fits: Most Cruisers with Banjo Fittings Requiring a 12mm wrench 19.99 15.99 AIR CLEANERS bullet covers for banjo bolts Perfect accent for caliper bolts. 1231 Bullet Banjo Bolt Covers (ea) Fits: All VTX1800 Models - Hand Control Clutch Banjo Bolt, Most Banjo Bolts require a 12mm wrench & only have 1 line protruding (Universal fit) 13.99 MISC INDEX 8 6 6. 2 7 7. 9 5 9 8 171

2009 marquis choke knob cover U.S. Patent 5,836,214 Our attractive chrome Choke Knob Cover installs easily without removing or modifying the stock choke knob. Fits: Honda: All VTX1300, '04-09 Shadow 750 Aero/Spirit C2 Kawasaki: Vulcan 800/1500/1600 Yamaha: '99-07 Road Star 1600/1700 & All Royal Star Venture, V Star 650/1100 2009 Marquis Choke Knob Cover (ea) 29.99 7830 petcock cover for vtx1300 Add the finishing touch to your drab fuel petcock by covering those unfinished parts with style. The left side of your tank will now look high class. Fits: All '03-09 VTX1300 Models 7830 Petcock Cover for VTX1300 (ea) 4046 shifter pivot cover for vtx On a finely finished bike like the VTX, you don t want an ugly weld showing on an otherwise decent shift lever. Fits: 02-08 VTX1800 Retro/S/N/T 4046 Shifter Pivot Cover (ea) 19.99 7011 mega horns Be heard loud & clear with our trumpet style horns for your ride. With new Mega Horn technology, get that loud air horn style sound in one little package. Installs swiftly in front of your motor along your front frame tubes. Ride on & be heard. 7737 Mega Horns with Mount (ea) Fits: Honda: All VTX1800/1300 Models Note: Engine guards may limit installation. 1 driver footpeg mount covers for vtx1300c Finish off those unfinished welds on your driver footpeg mounts even if you aren t a skilled welder! Our Driver Footpeg Mount Covers work great with stock pegs & also do wonders at showing off custom peg applications. Fits: '03-09 VTX1300C 7011 Driver Footpeg Mount Covers (pr) 49.99 Kool Kaps chrome covers Cover those unsightly & unfinished bolt heads with brilliant chrome. 2447 For 3/4 Hex Bolts* (10 pack) 2451 For 3/4 hex head bolt used in Küryakyn Highway Pegs* (pr) 11.99 2.99 works great on our highway pegs! * Requires a small amount of silicone. Found at local hardware store or order Küryakyn P/N 400039 for 8.99. 172 W W W. K U R Y A K Y N. C O M

add some flair! Attitude Medallions Add a personalized flair to your ride! Perfect for the left side of your Yamaha Motor or to any flat surface with a 4-1/2 diameter. Simple & affordable - A great way to show off a little attitude. Fits: Universal peel-&-stick applications - Requires a 4-1/2 diameter flat surface Yamaha: All 06-12 Roadliner, Stratoliner/Deluxe & 08-12 Raider Left Tranny Cover & Front Drive Hub Cover, & all 07-12 V Star 1300 & Stryker, 09-12 V Star 950 Front Drive Hub Cover Only & All V Star 650 Models on Air Cleaner Covers *Not recommended for Yamaha Engine applications - Use on flat surfaces only. 3796 3799 3795 3797 3714 3754 3713 3752 3764 3798 BIKE MAPS GOLDWING CAN-AM SPORT BIKE chrome medallions 3752 Helicopter Gunship (ea) 3754 Firefighter (ea) 3764 Deco* (ea) 3795 Flame* (ea) 19.99 19.99 19.99 19.99 chrome medallions 3796 Widow (ea) 3797 Zombie (ea) 3798 Chauvinist (ea) 3799 Patriot (ea) 19.99 19.99 19.99 19.99 black medallions 3713 Widow, Black (ea) 3714 Zombie, Black (ea) 18.99 18.99 LIGHTING ACCESSORY MOUNTS HANDLEBAR 3797 FOOT CHROME LUGGAGE 1492 1491 zombie medallions Keep a bunch of little Zombies with you wherever you are. Stick them on your motorcycle, toolbox, car, computer monitor anywhere you think their sinister faces will brighten your day. Just peel off the backing & fasten them anywhere! 1491 Large Zombie (pr) Requires 2 of flat surface for mounting 1492 Small Zombie (pr) Requires 1 of flat surface for mounting Note: Replacements for Küryakyn P/N s 7411, 7412 7520, 7521, & 8712 19.99 18.99 TOURING AIR CLEANERS MISC INDEX 8 6 6. 2 7 7. 9 5 9 8 173

ENGINE FOR YAMAHA 7728 7726 7725 7759 tappet block covers for yamaha Bolt directly over the bottom of your pushrod tubes & stand back to admire the chrome flowing from your pushrod tubes all the way down your bike. Road Stars can add the Cylinder Base Covers (P/N 7729) to complete the new chromed base of your motor. 7728 Fits: All 99-12 Road Star 1600/1700 & 02-09 Road Star Warrior Models (pr) 7726 Fits: 06-12 Roadliner/Stratoliner/Deluxe, 08-12 Raider, all 99-12 Road Star 1600/1700, & 02-09 Road Star Warrior Models (Includes 1 pair of Tappet Block Bottom Accents Only- no lower trim) (pr) 89.99 starter cover for yamaha Crown the end of your starter in Sparkling chrome & add smooth chrome lines to the top of your industrious look starter. This will really dress up the look of the front of your motor. 7725 All 06-12 Roadliner, Statoliner, Deluxe, & Raider Models (ea) 49.99 69.99 pushrod top covers for yamaha Connect the chrome between your valve covers & push rod tubes on the right side of your motor. 7759 Fits: 99-03 Road Star 1600 Models (pr) cylinder base covers for road star Flow chrome across the left side of your motor & atop your transmission to get that expensive chromed motor look in minutes! Add our Tappet Block Covers (P/N 7728) for enhanced sparkle on the right side. Fits: All 99-12 Road Star 1600/1700 & 02-09 Road Star Warrior Models 7729 Cylinder Base Covers (set) 99.99 Note: Fully dress your motor with additional Yamaha OEM chrome motor covers. 1062 1061 finned spark plug covers for road star 1700 shift rod linkages for yamaha Direct replacement installation. Let a little of your dark side out. Fits: All 99-12 Road Star 1600/1700 (except Warrior) & '08-'12 Raider Models 1061 Widow Shift Rod Linkage (ea) 89.99 1062 Zombie Shift Rod Linkage (ea) 2008 Küryakyn 89.99 7761 Fits: All 04-07 Road Star 1700 Models (except Warrior) For Carbureted Models Only (pr) 174 W W W. K U R Y A K Y N. C O M

E E ENGINE FOR VICTORY BIKE MAPS C GOLDWING D D CAN-AM B A SPORT BIKE LIGHTING A ACCESSORY MOUNTS A. ENGINE cam ADJUSTER BOLT COVER for victory Cover those unsightly cam adjuster bolts with these great looking, gear tooth designed accents. Engineered exclusively for the Victory motor, these covers bolt on & coordinate with all the Victory chrome engine accents. 7684 Fits: All '06-'12 Victory Models, Cruisers & Touring (pr) B. CHROME DIPSTICK COVER for victory As useful as dipstick s are, they can be an eyesore & take away from the look of your motor. This new chrome dipstick cover features a gear tooth design that looks great & retains the functionality of stock. Installation is quick & easy to get you back on the road in no time. 7682 Fits: All '06-'12 Victory Models, Cruisers & Touring (ea) Note: Only for 100" or 106" motors. B 59.99 45.99 D. CLUTCH ARM COVER for victory No other clutch arm cover offered for the Victory motor looks this good or installs this easy. Featuring a gear tooth design & simple bolt on installation to get you back on the road in no time. 7686 Fits: All '04-'12 Victory Models, Cruisers & Touring (ea) E. SMOOTH V for victory Update you Victory side covers with a smooth chrome look that ll really stand out. Installs in just minutes for a truly unique look unlike any other. 7685 Fits:'03-'12 Victory Models with V shaped covers between cylinders, Fits both Left & Right side (pr) C 7689 59.99 Renderings Shown HANDLEBAR FOOT CHROME LUGGAGE TOURING AIR CLEANERS C. ROULETTE Horn Cover for victory A chrome horn is just seconds away with this great looking cover. Retains the sound & improves the look on horns mounted between the frame down tubes. 7689 Fits: All '04-'12 Victory Vegas, Kingpin, Hammer, Jackpot, 8 Ball & Universal for '04-'12 Models with horn mounted at neck between front down tubes (ea) 34.99 MISC INDEX 8 6 6. 2 7 7. 9 5 9 8 175

ENGINE FOR HONDA 7731 7708 7703 7703 176 W W W. K U R Y A K Y N. C O M

BIKE MAPS OWN A SHOW-STOPPING MOTOR AT A REASONABLE PRICE! GOLDWING CAN-AM engine case covers for honda SPORT BIKE Amaze everyone with the look of a new show-stopping chrome motor on your VTX1300, VT1300 Custom Line or Fury. See both sides of your motor & even your clutch sparkle with chrome. No more drab gray areas around the heart of your motor any more. LIGHTING 7703 Fits: All 03-09 VTX1300 Models 199.99 7731 Fits: All '09-'12 Fury, All '10-'12 199.99 VT1300 Custom Line (Sabre, Stateline, & Interstate) chrome both sides of your engine! engine cover inserts for honda ACCESSORY MOUNTS HANDLEBAR Dress up your plain chrome engine covers with these racy, speed-lined Engine Cover Inserts. Sold in sets of 3, our molded ABS chrome-plated inserts stick to the smooth clutch, timing, & left crankcase covers adding depth & a machined from billet look. Easily installed without tools. Simple peel-&-stick installation. FOOT CHROME 7707 Engine Cover Inserts (set/3) Fits: All 02-08 VTX1800 Models 7708 Engine Cover Inserts (set/3) Fits: All 03-09 VTX1300 Models & all '09-'12 Fury Models, all '10-'12 VT1300 Custom Line (Sabre, Stateline & Interstate) 69.99 69.99 LUGGAGE 7703 7708 ALSO AVAILABLE 1. BOOMERANG FRAME TRIM pg 180 TOURING AIR CLEANERS 2.DRIVE SHAFT COVER pg 180 3.Additional rear endchrome pg 180-181 MISC INDEX 8 6 6. 2 7 7. 9 5 9 8 177

7709 looks great with our engine case covers! clutch housing shroud for vtx1800 We designed this part to finish the job started by our Engine Case Covers. Made of stamped steel with chrome-plated construction this piece installs quickly & easily with industrial strength adhesive tape to perfectly cover the exposed upper surface of the clutch housing. Fits: All 02-08 VTX1800 Models with Küryakyn Engine Case Covers (P/N 7704) only 7709 Clutch Housing Shroud (ea) 59.99 9002 after 3/4 9001 9001 8261 3-1/8 8261 rear shock top cover for honda Chrome shocks with a dull chrome top mount? Not good. Finish the chrome all the way to the top with our Rear Shock Top Cover & notice the difference. With Küryakyn styled blood grooves, these covers finish the shock top out right. Fits: All Honda VTX1800 (except N) & all VTX1300, Shadow 1100 Sabre/Spirit, Shadow 750 Ace/Aero/Spirit/Phantom & other Models with shocks matching dimensions shown 8261 Rear Shock Top Cover for Honda (pr) 59.99 9002 before reflector covers for honda & yamaha Heighten visibility while adding a stylized cover! 9001 Small Reflector Covers (pr) Fits: Front: All VTX1800, all 1100 Spirit (front & rear), all 750 Spirit, all Shadow VLX 600, '10-'12 VT1300 Custom Line & other motorcycles with reflectors that are 3-5/16 by 1-1/4 or smaller with 1/4 of clearance around the reflector 9002 Large Reflector Covers (pr) Fits: Front: All Yamaha Road Star, V Star 950, 1100, Royal Star & Royal Star Venture, Raider & Stryker Rear: Honda: 02-07 VTX1800 (except C) Models & 03-06 1300 Retro/S/T, & other motorcycles with reflectors that are 3-1/2 by 1-3/8 or smaller with 1/4 of clearance around the reflector 19.99 19.99 178 W W W. K U R Y A K Y N. C O M

7704 7704 BIKE MAPS GOLDWING CAN-AM engine case covers for vtx1800 Complete the creamy, luscious appearance of your VTX1800 with these ultimate Engine Case Covers! Fit snugly along the base of the engine below the fins on both sides. They look like expensive chromed-engine cases but they bolt on in minutes & cost a heck of a lot less. Fits: All 02-08 VTX1800 Models 7704 Engine Case Covers 199.99 7704 SPORT BIKE LIGHTING ACCESSORY MOUNTS don't miss Engine cover inserts - A simple & great looking addition! See Pg 177 HANDLEBAR FOOT 7824 rear tank trim CHROME for vtx1300c Add some shine & fill the void between the gas tank & your seat with this stylish chrome accent. Keep the lines of your bike flowing & cover up those crude welds on the back of your tank with a quick & easy installation. LUGGAGE Fits: 03-09 VTX1300C Models TOURING 7824 Rear Tank Trim for VTX1300C (ea) intake runner/spark plug cover for valkyrie Replace the dull cast surface with beautiful show-chromed finish. 7705 Fits: Valkyrie & Valkyrie Tourer (except Interstate) (pr) 89.99 after transmission cover set for valkyrie Put the finishing touch on your cast transmission case & nicely complement existing chrome engine components. 7710 Fits: All Valkyrie Models (except Rune) (pr) 169.99 AIR CLEANERS MISC INDEX 8 6 6. 2 7 7. 9 5 9 8 179

REAR END A. boomerang frame trim for vt1300 & fury Cover those huge black side panels with aggressive styling & beautiful chrome. These boomerang covers give you the ultimate custom look without spending excess time & money to chrome the frame. VT1300 Custom owners add the Küryakyn Drive Shaft Cover (P/N 8951) & prepare to be amazed! 8950 Fits: 10-'12 VT1300 Custom Line (Sabre/ Stateline/Interstate) Models (pr) 8952 Fits: 09-12 Fury Models (pr) B. drive shaft cover for vt1300 Want the look of a custom chrome drive shaft without the wasted time & extra hassle of tearing apart the rear end? This cover will give you a custom look in minutes & will cost you much less than chrome plating all the original parts. Fits: 10-'12 VT1300 Custom Line (Sabre/ Stateline/ Interstate) Models 8951 Drive Shaft Cover (ea) FOR HONDA 99.99 119.99 119.99 A B VTX1300 Shown D F C 8305 Shown D E C F 8260 180 W W W. K U R Y A K Y N. C O M

BIKE MAPS A GOLDWING B CAN-AM SPORT BIKE LIGHTING ACCESSORY MOUNTS HANDLEBAR D C. drive shaft cover for vtx U.S. Patent D549,622 Compare our Drive Shaft Cover to others on the market. This setup sets a whole new standard. Two-piece, chrome-plated stamped steel construction covers both the differential & shaft tube giving the appearance of a completely chromed assembly. Fits: All 03-09 VTX1300 & 02-08 VTX1800 Models 8285 Drive Shaft Cover for VTX (ea) 1 FOOT CHROME D. drive hub top cover for vtx Imagine a great football team with no quarterback. Adding one key player can create a legendary combination. Announcing Küryakyn s top draft pick; the Drive Hub Top Cover for the VTX. Add this new player to your bike & our gleaming Chrome Drive Shaft Cover (P/N 8285) & this team could be on its way to the playoffs! Fits: All Honda VTX1300/1800 Models with Küryakyn Drive Shaft Cover (P/N 8285) 8688 Drive Hub Top Cover for VTX (ea) 99.99 F. frame trim for vtx Transform that rough black frame forging into a sleek, stylish, attention getter. This two-piece kit attaches with high-strength, high temp adhesive for quick & easy installation. 8260 Fits: All VTX1800 (pr) 8305 Fits: All VTX1300 (pr) 89.99 79.99 LUGGAGE TOURING AIR CLEANERS E. swingarm cover for vtx Your friends are going to think you went out & bought a whole custom swingarm with this show-chrome cover. It'll set you apart & is the perfect complement to our Drive Shaft Cover (P/N 8285). Fits: All 03-09 VTX1300 & 02-08 VTX1800 Models 8287 Swingarm Cover for VTX (ea) 99.99 MISC INDEX 8 6 6. 2 7 7. 9 5 9 8 181

REAR END FOR YAMAHA chrome your entire visible swingarm in minutes! A B C E 8262 8229 A. lower belt guard accent for road star Want to sparkle up that drab stock belt guard? This accent is easily added to the lower belt guard to protect the OEM belt while covering the black plastic. WOW! What a difference! Fits: All 99-12 Road Star 1600/1700 Models (except Warrior) 8663 Lower Belt Guard Accents (ea) 89.99 C. phantom covers for road star Add the finishing touches to the tail end of your swingarm & smooth out those lines. These little beauties cover up the axle, adjustment bolts, & rough casting in one easy step. 8229 Fits: All '99-'12 Road Star (except Warrior) (pr) Note: 69.99 Right side on '07-'12 Models requires aftermarket exhaust with 1" clearance from axle nut. 8665 Fits: All 99-12 Road Star (except Warrior) with stock 79.99 exhaust or other that covers right rear axle bolt (pr) Note: When checking for appropriate clearance, please remember swingarms move separate from your exhaust mounts. Compress & extend suspension for proper clearance. B. swingarm covers for road star Want the appearance of an expensive chrome swingarm without the hassle of tearing apart the back end of your bike? Chrome your whole visible swingarm with our Swingarm Cover Kit & add that extra shine in minutes for a fraction of the price. 8262 Fits: All 99-12 Road Star (except Warrior) (set) 149.99 Note: Right side on 07-12 Models requires aftermarket exhaust with 1 clearance from axle nut. 8664 Fits: All 99-12 Road Star (except Warrior) with stock exhaust or other that covers right 149.99 rear axle bolt (set) Note: When checking for appropriate clearance, please remember swingarms move separate from your exhaust mounts. Compress & extend suspension for proper clearance. D B 182 W W W. K U R Y A K Y N. C O M

BIKE MAPS GOLDWING D CAN-AM SPORT BIKE B LIGHTING A C ACCESSORY MOUNTS E HANDLEBAR FOOT CHROME D. boomerang frame trim for road star Chrome your rear frame supports with smooth elegant beauty the simplest way possible! These metal covers bolt directly over your bland frame & include all the hardware you will need for a seamless installation. You ll get the look of a custom chromed frame for a fraction of the cost! Fits: All 99-12 Road Star 1600/1700 Models (except Warrior) 8662 Boomerang Frame Trim for Road Star (set) 1 D LUGGAGE TOURING AIR CLEANERS E. front drive pulley cover for road star Customize your Road Star & add some class with the look of motion to your front drive pulley cover. Installation takes only seconds. Fits: All 99-12 Road Star 1600/1700 Models (except Warrior) 8960 Front Drive Pulley Cover (ea) add the look of motion! MISC INDEX 8 6 6. 2 7 7. 9 5 9 8 183

REAR END FOR YAMAHA A B C D Zombie Medallion pg 173 A A B 184 A. Side Cover accent for yamaha A touch of chrome in just the right place to accent an area that usually goes unnoticed. Featuring a stylish ribbed design & made from lightweight ABS, this cover uses ultra strong VHB tape for a secure hold & quick installation. Fits: All 08-12 Yamaha Raider Models & '06-'12 Roadliner, Stratoliner & Deluxe 8944 Side Cover Accent for Yamaha (ea) B. top belt guard for yamaha Simple elegance. This fully chromed replacement guard with its turned-down end & stylish side accents only enhance the original lines of the rear end. Easy two bolt installation. Fits: All 08-12 Yamaha Raider Models & '06-'12 Roadliner, Stratoliner & Deluxe 8940 Top Belt Guard (ea) 79.99 W W W. K U R Y A K Y N. C O M

License Plate Bracket pg 189 C BIKE MAPS GOLDWING 8942 covers both sides of your swingarm! CAN-AM Custom Bullet Turn Signals pg 103 C. swingarm axle adjuster cover for raider This two-piece creation was not only designed to conceal but also gracefully highlight the trailing edge of your swingarm without being too overbearing. The removable center allows access for belt adjustments when needed. Select the original or short cover to suit your style & be amazed. (Sold individually) Fits: All 08-12 Yamaha Raider Models - Fits both left & right side of swingarm (sold individually) Note: Only P/N 8942 installs on right side with Vance & Hines Exhaust. SPORT BIKE LIGHTING 8941 Swingarm Axle Adjuster Cover (ea) 8942 Short Swingarm Axle Adjuster Cover (ea) 89.99 69.99 ACCESSORY MOUNTS 8941 HANDLEBAR 8942 looks great with... license plate bracket Replace your sub fender with our uniquely styled replacement. See Pg 189 FOOT CHROME D Covers Left Side Only D. boomerang frame cover for yamaha A renowned Küryakyn parts designer once said, Chrome won t get you home, but you ll look good when you get there. This natural transition covers the black frame rails with a flash of chrome that catches the eye & provides a more flowing appearance. One of the most aesthetically pleasing additions you can make to these already beautiful motorcycles. Fits: All 08-12 Yamaha Raider Models & '06-'12 Roadliner, Stratoliner & Deluxe (Covers left side only) 8943 Boomerang Frame Cover (ea) 59.99 LUGGAGE TOURING AIR CLEANERS ALSO AVAILABLE 1.Tappet block covers pg 174 2.Chrome fork protector covers pg 168 MISC INDEX 8 6 6. 2 7 7. 9 5 9 8 185

REAR END FOR V STAR 8203 8237 8203 8236 phantom covers for v star 650 & 1100 boomerang frame covers for v star 650 & 1100 Easily installed, these show-chromed, die-cast frame covers make artwork out of a part of your bike that would otherwise fade into the background. The kit for the V Star 1100 includes a pair of upper frame covers that smooth the transition from the Boomerang Frame Cover to the fender. 8236 Fits: All V Star 650 Models (pr) 109.99 8237 Fits: All V Star 1100 Models (pr) 169.99 Turn a hodge-podge of fasteners, frame tubes, axles, hubs etc. into one smooth-sculpted chrome area. The kit includes covers to hide the bolt heads that secure the drive housing to the swingarm. Fits: 98-11 V Star 650, 99-09 V Star 1100 ( 06-11 V Star 650 & 1100 right sides require aftermarket exhaust that allows 3/4 clearance from exhaust mount bracket & axle nut) 8203 Phantom Covers for V Star (pr) 79.99 Note: When checking for appropriate clearance on 06-11 Models please remember swingarms move separate from your exhaust mounts. Compress & extend the suspension for proper clearance. 8286 shaft drive cover for v star 650 & 1100 U.S. Patent D549,621 Give the rear differential the effect of a chromed housing at a fraction of the cost. Our Shaft Drive Cover integrates nicely with our Phantom Covers. Easy add-on with a two-bolt installation. Fits: 99-09 V Star 1100 & 98-11 V Star 650 Models 8286 Shaft Drive Cover for V Star (ea) 89.99 8286 8286 2024 2017 mid-frame covers for v star 1100 Turn that drab black frame tube under your seat into a real eye catcher. When added to our Boomerang Frame Cover it looks like you ve chromed the whole frame! Quick & simple to install. 8255 Fits: All 99-09 V Star 1100 Models (pr) 69.99 clutch cable adjuster cover Hide the crude, zinc-plated cable adjuster! Installs with easy-to-handle spring clips. 2017 Fits: All Kawasaki 800 Vulcan (ea) 2023 Replacement Spring Clips for P/N 2017 (pr) 41.99 2.99 ferrule cover for v star Here s a little flash of chrome for V Star Speedo cables. Just slip it into place & tighten the set screw. 2024 Fits: V Star 650 Models (ea) 19.99 186 W W W. K U R Y A K Y N. C O M

LICENSE PLATES BIKE MAPS GOLDWING CAN-AM SPORT BIKE LIGHTING L.E.D. LAYDOWN CURVED LICENSE PLATE for victory & universal full license plate illumination! Nobody likes to have a license plate, but we all have to have one. So here is the solution to make it look good, maintain functionality, & remain legal all on a simple bolt on package. This curved plate frame features L.E.D. backlighting & a 15 degree mounting angle that flows with the lines on your bikes rear fender. Fits: '10-'12 Victory Cross Roads & Cross Country, Universal, Bolts to flat plate mount (Widest mounting slot is 5" wide) for 4"x7" plate ACCESSORY MOUNTS HANDLEBAR 7688 Laydown Curved License Plate Frame (ea) Compliant with FMVSS#571.108 & marked SAE DOT L 11. 109.99 P/N 7688 & 9198 use backplate shown FOOT Side View CHROME curved tip-back license plate frame Add the Curved Tip-Back License Plate Frame & smooth out the back of your fender. With 8 of angle & a curved frame, this chrome beauty holds a 4 x 7 plate & bolts directly to your stock OEM license plate mount. Fits: Bolts directly to flat stock OEM license plate mount. Widest mounting slot is 5" wide. 9198 Curved Tip-Back License Plate Frame (ea) Note: Doesn't fit VT1300 Stateline or Interstate. 69.99 LUGGAGE TOURING AIR CLEANERS MISC works great on short bobtail fenders too! INDEX 8 6 6. 2 7 7. 9 5 9 8 187

curved laydown license plate mount The rear fenders on today s Cruisers are very impressive. The license plate bracket & reflectors are a different story. Our streamlined License Plate Mount holds a 4" x 7 plate & is truly the final touch needed. Such a difference for so little money. Fits: 03-09 VTX1300 Retro/S/T or 02-08 VTX1800 Retro/S/T Models 9171 Curved Laydown License Plate Mount (ea) 79.99 works great with run-turn-brake controller pg 100 CURVED LICENSE PLATE FRAME WITH DUAL ACCENT LIGHTING With its gentle curved contour & snug, fender-hugging mount, this license plate frame has a distinctive look all its own. For even more sizzle, red L.E.D. accent lights operate in run/brake, or run/turn modes. White L.E.D. s provide additional plate illumination at night. A perfect complement to Run-Turn-Brake Controllers this plate ties right in for all 3 functions. Designed to fit 4 x 7 plates. Fits: 03-09 VTX1300 Retro/S/T, 02-08 VTX1800 Retro/S/T Models & Universal Lay Down Applications 3166 Curved License Plate Frame with Dual Accent Lighting (ea) Note: Universal applications requires drilling holes in fender. 1 188 W W W. K U R Y A K Y N. C O M

full license plate illumination! BIKE MAPS GOLDWING CAN-AM tri-light can be mounted on top or bottom! SPORT BIKE LIGHTING l.e.d. lighted License plate frame with tri-light Patent Pending Now you can add additional lighting & hide that ugly stock license plate mount at the same time. This great looking curved frame features a white L.E.D. license plate light & three red strip lights with running & brake functions all wrapped in a brilliant chrome finish. Designed to mount to the existing factory license plate bracket, installation is simplified, & with 8 degrees of tip back the rear of the bike will be transformed. Fits: Universal: Bolts directly to flat stock OEM license plate mount (Requires 3" of clearance for Tri-Light) 3152 L.E.D. License Plate Frame with Tri-Light (ea) Compliant with FMVSS#571.108 & marked SAE DOT L 11 149.99 both running & brake function ACCESSORY MOUNTS HANDLEBAR FOOT sub-fender license plate bracket with l.e.d. curved frame The best single way to improve the looks of this sweet ride is to fully remove & replace the OEM billboard with our Curved License Plate Frame. The compact brackets clean up your rear end & allow stock, custom, or Silver Bullet Turn Signals to be installed. The gleaming chrome frame is illuminated with cool white L.E.D. s built right in. Now that s more like it! Fits: All 08-12 Yamaha Raider Models (Holds a 4" x 7" Plate) 9257 License Plate Bracket with L.E.D. Curved Frame (kit) 189.99 Note: Turn signal mounts allow reinstallation of stock turn signals or others that mount with a 5/16 bolt or stud. works great with our universal & bullet turn signals pg 103-104 CHROME LUGGAGE TOURING AIR CLEANERS MISC INDEX 8 6 6. 2 7 7. 9 5 9 8 189

new brighter full license plate illumination! l.e.d. lighted curved license plate frame for aero 750 & custom applications Finish off those clean lines of the Aero with this custom Curved License Plate Mount. Solid metal parts, L.E.D. lights, & curved design smooths out the lines of the bulky stock mount. Simple installation uses the stock mounting holes. (Holds a 4" x 7" Plate) Fits: All 04-12 Honda 750 Shadow Aero Models & Universal Custom Applications 9255 L.E.D. Lighted Curved 119.99 License Plate Mount (ea) Note: Universal applications may require drilling holes in your fender. Compliant with FMVSS#571.108 & marked SAE DOT L 11 9166 9167 9164 9165 3160 3161 license frame & back plate set Our chrome frame & back plate will dress up your license plate when using the stock bracket. Fits: 4 x 7 Plates 9166 License Frame & 21.99 Back Plate Set Note: Acorn nuts not included. laydown license holder Designed to replace Harley s standard 3-bolt license plate bracket, this baby streamlines your fender by tilting the plate back. Kit includes rubber wedge so you have an option as to how far the plate lays down. Fits: Universal for Custom Applications (Holds a 4" x 7" Plate) License Plate Frame not Included Note: May require drilling holes in fender. 9165 Laydown License Plate Holder (ea) swept eagle license plate frame This contemporary eagle license plate frame can be the final touch you need. 3161 Fits: Universal 4 x 7 Plates (ea) lone eagle license plate frame Show your American pride! 49.99 3160 Fits: Universal 4 x 7 Plates (ea) 49.99 lighted license plate frame This chrome die-cast frame incorporates two high intensity light bulbs that are wired separately. Wire one each to your brake & tail lamp circuits or together for an extra bright stop or running light. Includes integrated white light for plate illumination. Fits: 4 x 7 Plates 9167 Lighted License Plate Frame (ea) 49.99 Note: Not intended to replace O.E. brake or taillight. ball-milled license plate frames The one thing most custom license plate frames have in common is they re too small to fit some of the state s license plates! This frame is offered in two sizes to fit 4-3/8 x 8 & 4 x 7 plates. Depending on which plate you re working with, some minor modifications may still be necessary but this will make many installations much easier. Glistening chrome finish with ball-milled accents. 9164 Large License Plate Frame (ea) 29.99 9163 Small License Plate Frame (ea) 29.99 190 W W W. K U R Y A K Y N. C O M

9253 BIKE MAPS 9251 GOLDWING new brighter full license plate illumination! HOW TO ORDER: 1. SELECT LICENSE HOLDER STYLE 2. SELECT REQUIRED MOTORCYCLE SPECIFIC MOUNT CLAMP 3125 CAN-AM SPORT BIKE LIGHTING lit/ unlit 9252 Taillight can be Installed on Top or Bottom! 9252 L.E.D. curved side mount license holders In the past, if you wanted a cool, custom side-mount license plate you paid through the nose. Our product brings the price down to reality without compromising style & function. Choose your plate then get the correct Mounting Clamps. Sized to fit 4 x 7 plates only. 1 license holders 9253 Chrome Curved Horizontal Side Mount (ea) 9251 Chrome Curved Vertical Side Mount (ea) 9252 Chrome Lighted Curved Vertical Side Mount with Taillight (ea) 3125 Gloss Black Curved Horizontal Side Mount (ea) Compliant with FMVSS#571.108 & marked SAE DOT L 11 2 119.99 119.99 159.99 119.99 Note: Not intended for use with saddlebags. Please check local laws regarding side mount license plates before ordering. Mount Clamps required for installation - Sold separately (below). mount clamps Required for installation of Küryakyn Side Mount License Holders. chrome 3174 Fits: All Honda VTX1300/1800 (ea) 3175 Fits: Yamaha Road Star without swingarm covers (except Warrior) & other motorcycles with 1-1/4 diameter swingarms (ea) 3176 Fits: Yamaha V Star 1100/650 (ea) 3177 Fits: Yamaha Road Star (except Warrior) with Küryakyn Swingarm Covers (P/N 8262 & 8664) (ea) 3182 Fits: All Kawasaki 07-12 Vulcan 900 Models & All 04-10 Vulcan 2000 Models (ea) gloss black 3175 32.99 31.99 31.99 32.99 32.99 ACCESSORY MOUNTS HANDLEBAR FOOT CHROME LUGGAGE TOURING AIR CLEANERS 3120 Fits: VTX 1300/1800 (ea) 3121 Fits: Yamaha Road Star without swingarm covers (except Warrior) & other motorcycles with 1-1/4 diameter swingarms (ea) 3122 Fits: All Kawasaki 06-12 Vulcan 900 Models & All 04-10 Vulcan 2000 Models (ea) 32.99 32.99 32.99 MISC INDEX Note: Please check local laws regarding side mount license plates before ordering. 8 6 6. 2 7 7. 9 5 9 8 191

l.e.d. license plate bolt lights Light up your license plate whether it s in the stock location or custom mounted with these white L.E.D. bolt lights. You won t find a cleaner license plate lighting option with a simpler installation. 9199 L.E.D. License Plate Bolt Lights (pr) 19.99 Note: 1/4-20 Mounting Stud. Chrome Frame sold separately (P/N 9163 - pg 190). Not intended for use with Küryakyn Curved Frames. 9399 l.e.d. license plate illuminators with red accent lights Each License Plate Illuminator has two L.E.D. s. The white L.E.D. lights up the license plate & the rear-facing red L.E.D. can function as an auxiliary running light, turn signal, or brake light for added visibility. The 1/4-20 mounting stud makes it simple to bolt them on, wire them in, & ride on! 9399 L.E.D. License Plate Bolt Lights with Red Accent Light (pr) Not intended for use with Küryakyn Curved Frames. 34.99 Lights Not Included A B C D A. license plate helmet lock with mount Add this License Plate Helmet Lock & conveniently lock your helmet to your motorcycle. The simple little mounting plate easily bolts to the back of almost any motorcycle & allows the easiest access for locking your helmet. 4248 License Plate Helmet Lock (ea) 49.99 Note: Will not install with Curved License Plate Frames or Swept/ Lone Eagle License Plate Frames. B. license plate marker light/ turn signal mount Mount auxiliary marker lights or turn signals to your license plate. This simple system mounts directly to the back of your license plate with support backing plate & two side mount brackets. The side mount brackets have a 3/8 hole & will accept Küryakyn Silver Bullets or L.E.D. Mini Bullets (See pgs 103-104). Note: Great option for allowing the mounting of saddlebags on bikes that need to relocate turn signals. Will not work with Küryakyn Curved License Plate Frames. 4247 License Plate Marker Light Mount (ea) C. turn signal relocator kit Get the best of both worlds! Now you can mount a set of Edge Saddlebags & keep your stock turn signals. This kit takes all the guess work out of relocating your stock signals by moving them from the fender to the license plate area. Side mount brackets have several mounting points for lights & will accept most OEM rear turn signals. 3155 Turn Signal Relocator Kit (kit) 49.99 Note: Will not work with Küryakyn Curved License Plate Frames. works well with: 5/16 or 3/8 small & large silver bullets p/n 5032 turn signal küryakyn mini bullets D. inspection plate This small chrome display bracket mounts cleanly in any location dictated by local or state regulations. Now you don t have to mess up a nice paint job or chrome surface with some cheesy government sticker. Universal fitment. 9168 9162 Inspection Plate 3-1/2 x 3-1/2 (ea) Texas Inspection Plate 2-7/8 x 4 (ea) 46.99 46.99 192 W W W. K U R Y A K Y N. C O M