Miller JV Series. Medium Duty Hydraulic Cylinders. Up to 1000 PSI Bore Sizes 1" through 8" 18 Mounting Styles. Catalog M September, 2011

Similar documents
PL-2 Series Medium-Duty Industrial Hydraulic Cylinders BPL-2 PH-2 PH-3 PHX

Medium Duty Hydraulic Cylinders Series 3L

Parker Series 2A Air Cylinder

Industrial Cylinder Products Hydraulic and Pneumatic Cylinders. Catalog (01/11)

HYDRAULIC HEAVY DUTY

AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6

ASP Series Steel Body NFPA Cylinder Line

SERIES MH (NFPA) CYLINDER

7" & 8" Bore High Pressure zhc03 Hydraulic Cylinders Series 3H

PURAKAL SERIES 100 TABLE OF CONTENTS

Series LAA Industrial Interchangeable Pneumatic Cylinders. Catalog LAA-1 05/00

Mobile Cylinder Div. Standard Build Series. Catalog HY /US Rev C

SERIES PSI 5000 PSI NON SHOCK HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL CYLINDERS, INC

Industrial Cylinder Products. Pneumatic & Hydraulic Cylinders

FULL COLOR TAB #1 TA 7

Series VH Hydraulic Cylinders

HEAVY DUTY PNEUMATIC CYLINDERS

MEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI

Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable

Series 83. Stainless Steel Mini Cylinder

HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD BIMBA. company

A SERIES. Heavy-Duty Pneumatic Cylinders Pressure Rating 250 PSI

Hydraulic Cylinder NFPA Industrial Type

SERIES HH (NFPA) CYLINDER

3MA/4MA Series Non-Lube NFPA Air Cylinders

HYDRAULIC CYLINDERS NFPA STYLE 1 1/2 TO 8 BORE HYDRAULIC 3000 PSI

2A Tie Rod Cylinders NFPA Pneumatic Cylinders for working pressures up to 18 bar. Catalogue HY /UK October 2006

Series MH Hydraulic Cylinders

PH-3 Series 10" - 20" Bore Heavy-Duty Industrial Hydraulic Cylinders BPL-2 PH-2 PH-3 PHX

SERIES TA (NFPA) CYLINDER

AL4 Series Air Cylinder

Pneumatic Cylinders NFPA Series

SERIES PSI OPERATING PRESSURE HEAVY HYDRAULIC DUTY CYLINDER HEAVY DUTY HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC

7" & 8" Bore zcy03 High Pressure Hydraulic Cylinders Series 3H

Series MH Heavy Duty Mill Hydraulic Cylinder

Cylinders HD1 Cylinders

Medium Duty Hydraulic Cylinders. Series 3L

TaskMaster Pneumatic Cylinder

Air/Oil Tanks Air Boosters Cylinder Options Multi-Stage Triple-Rod Basic Cylinders Accessories Technical Data TRA HOW TO ORDER: SERIES TRA (TRIPLE PIS

CYLINDERS OPTIONS ACCESSORIES

JIT Cylinders A Series Catalog

CATALOG FL-16-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES

Metric Hydraulic Cylinders Series HMI

TABLE OF CONTENTS CYLINDER FEATURES MOUNTING STYLES DOUBLE-ACTING Series T and TS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC SWITCH D

Series AM/MM/WM Mill Type Cylinders

FULL COLOR TAB #6 TC 105

AIR AND HYDRAULIC CYLINDERS NFPA INDUSTRIAL TYPE

250 psi rating. series. pneumatic cylinders. bulletin 0606ST.

Stainless Steel Air Cylinders. Series SA

The Lehigh Miracalube Air Cylinder The Only Real Self-Lube Air Cylinder in the World BENEFITS!

Cylinders Small Bore Tie Rod

MA SERIES. Medium-Duty Pneumatic Cylinders Pressure Rating 200 PSI

Series MH MH13 ISO MX1 ISO MX3 ISO MX2 MH12 MH10 MH36 MH35 MH42 ISO ME5 ISO ME6 ISO ME2 MH62 MH64 ISO MP1 ISO MP5 ISO MP3 MH61 MH72

Actuator Products Tie Rod Cylinders 4MA/4ML Series

Contents. Hydraulic Cylinder

T-MAC CYLINDERS, INC.

2A Pneumatic Cylinders

HPI Cylinders. Manufacturers of Hydraulic & Air Cylinders Since 1946

NFPA Double acting imperial cylinders

Accessories Air/OilTanks Switches Clevis&Brackets AirBoosters AlignmentCouplers. Sensors

Electronic Stroke Positioning Cylinders Series ES Series EM Series EP

SERIES PSI LINEAR POSITIONING CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC 5000 PSI NON SHOCK

ISO 6020/2 industricylindre Industrial cylinders

Heavy Duty 3500/5000. psi rating. series. hydraulic cylinders. bulletin 0207XH

NEN Series NFPA Aluminum Cylinders

LP/LPM Series. Non-Lube Air Cylinder P1M. Tooling Plate P1M. Swing Clamp P1M. Contents E51

MH SERIES METRIC HYDRAULIC CYLINDERS. Specials are Our Standard. ISO standard 6020/2-160 bar series For working pressures up to 210 bar

Actuator Products Compact Cylinders

Air Cylinders 3MAJ/4MAJ Series

Extruded Body Cylinders, ISO 6431, ISO compliant Series 61

TAS SERIES TAB

LESA Series TT Linear Electrohydraulic Servo Actuators

AIR CYLINDER Series A23, A24

Cylinders. HD1 Cylinders. Customize Your Cylinder. Viton Seals (VI) Cushions (CR, CF, CB) Low Breakaway Option (NL) Magnetic Piston (MP)

Tie-rod Cylinders, ISO 6431, ISO compliant Series 60

AIR CYLINDER Series A12, A13

SERIES HH WITH HYDRAULIC ROD LOCK

Heavy Duty Hydraulic Roundline Cylinders. Series RDH

NFPA Interchangeable Air Cylinder Medium Duty Series. ø1.5", ø2", ø2.5", ø3.25", ø4"

High Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation

Hydraulic cylinders type CN - round heads with counterflanges to ISO nominal pressure 16 MPa (160 bar) - max 25 MPa (250 bar)

MC105R2 ISO 9001 REGISTERED

E Series Economic Tie-Rod Cylinder Line

Aluminium tube and profile

Inch size: ø1.5", ø2", ø2.5", ø3.25", ø4" How to Order. Nil. Air cushion. Both ends. Nil. None N H R. Head end Rod end 400 (4") NCA1-L400 NCA1-F400

E Series Economic Tie-Rod Cylinder Line

3000 psi rating. series. hydraulic positioners

Stainless Steel Air Cylinders. Series SA

FULL COLOR TAB #15 PFLF POSITION CONTROL

Series AHM Metric Hydraulic Cylinder

wiper seal keeps contaminates from getting into cylinder by aggressively wiping foreign materials from the piston rod, enhancing the rod seal life.

DB MX1 5" 12" 2" S P S

S Series Stainless Steel NFPA Interchangeable Cylinder Line

Heavy Duty Bench Top Presses

Maintenance Instructions, Parts Identification & Seal Kits for Series 2H / 2HD / 2HB & 3H / 3HD / 3HB

FLUID POWER COMPONENTS & SYSTEMS

Optimized for OEM requirements at a lower price.

Cylinders ISO Bores from 32 to 125 mm

HEAVY DUTY SS STAINLESS STEEL CONSTRUCTION

Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%

Transcription:

Medium Duty Hydraulic Cylinders Catalog M0- September, 0 Up to 000 PSI ore Sizes " through " Mounting Styles

AV Series Cylinders Up to 0 PSI Permanently Lubricated AL Series Aluminum Cylinders Up to 0 PSI Permanently Lubricated Series AV air cylinders are available in bore sizes from -/" through " and up to 0 PSI operating pressure. Standard NFPA dimensions and proven Miller design features. VL Series Cylinders Up to 0 PSI Series AL air cylinders are available in bore sizes from -/" through " and up to 0 PSI operating pressure. HV Series Cylinders 000 PSI VL Series Cylinders for Valve Actuation feature a removable rod bushing for easy rod seal service. Optional welded or threaded lift eye. ore sizes from " to ". Miller s heavy-duty cylinder line for demanding hydraulic applications. ore sizes from -/" to ". In line with our policy of continuing product improvement, specifications and information contained in this catalog are subject to change. Copyright 0 by Parker Hannifin Corporation. All rights reserved. PINTED IN THE U.S.A. WANING FAILUE O IMPOPE SELECTION O IMPOPE USE OF THE PODUCTS AND/O SYSTEMS DESCIED HEEIN O ELATED ITEMS CAN CAUSE DEATH, PESONAL INJUY AND POPETY DAMAGE. This document and other information from the Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having expertise. It is important that you analyze all aspects of your application, including consequences of any failure and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice. Offer of Sale The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by provisions stated on a separate page of the document entitled Offer of Sale.

Table of Contents Table of Contents Page Specifications, Mounting Styles, Ordering Notes... Cylinder Features..., " to " ore Sizes Model, Side Lug Mount..., Model, Side Tap Mount..., Model, Head ectangular Flange Mount...0, Model, Cap ectangular Flange Mount..., Model, Head Square Flange Mount..., Model, Cap Square Flange Mount..., Model 0 Series, Tie ods Extended Mountings..., Model, Head Trunnion Mount..., Model, Cap Trunnion Mount... 0, Model, Intermediate Trunnion Mount..., Model, Cap Fixed Clevis Mount..., Model, Spherical earing Mount... Double od End Cylinders..., " ore Sizes Model 0 Series, Tie ods Extended Mountings... 0, Model, Head Square Mount... 0, Model, Cap Square Mount... 0, Model, Side Lug Mount..., Model, Side Tap Mount..., Model, Cap Fixed Clevis Mount..., Models,, and Trunnion Mountings..., Model, Spherical earing Mount... Double od End Cylinders... Linear Alignment Couplers... Cylinder Accessories... 0, Spherical earing Mounting...,,, Spherical earing Mounting Accessories... Push and Pull Forces... Operating Fluids and Temperature ange... Cylinder Pressure atings... 0 Ports... Stroke Data... Tie od Supports... Stroke Adjusters... Thrust Key Mountings... Stop Tube, Mounting Classes... Piston od Selection Chart and Data... Parts List and Seal Kits...- How to Select a Miller Cylinder... 0 How to Order... Safety Guidelines... Storage, Installation, Mounting ecommendations, and Trouble Shooting... Offer of Sale... IC

Miller Fluid Power JV Series Medium-Duty Hydraulic Cylinder When the job calls for reliable, medium-duty performance, specify JV Series. A 00,000 psi yield strength chrome-plated, case-hardened piston rod. A,000 psi yield strength rod-end stud with rolled threads. 00,000 psi yield strength tie rods. With construction like this, it s no wonder Miller Fluid Power s JV Series is rated up to 000 psi hydraulic pressure. They re truly premium quality cylinders, and to make sure every cylinder is premium quality, we subject each and every one not just batch samples to tough inspection and performance tests. See inside for the inside story on all the features that make JV Series the high performance, long lasting choice for all your medium-duty hydraulic applications. Note: od diameters over /" will use a threaded rod bushing.

Standard Specifications Medium-Duty Service ANSI/(NFPA) T..- Specifications and Mounting Dimension Standards Standard Construction Square Head Tie od Design Nominal Pressure 000 PSI Dependent on ore Size Standard Fluid Hydraulic Oil Standard Temperature -0 F. to + F.** ore Sizes " through " Piston od Diameters /" through /" Available in all bore and rod combinations. Side Tap Model Mounting Styles and Ordering Notes Side Lug Specifications/ Mountings Mounting Styles standard styles at various application ratings Strokes Available in any practical stroke length Cushions Optional at either end or both ends of stroke. Float Check at cap end. od Ends Three Standard Choices Specials to Order In line with our policy of continuing product improvement, specifications in this catalog are subject to change. Available in all bore and rod combinations through " bore. " bores supplied as Head Square (Model ) and Cap Square (Model ) mounts. Head ectangular Flange Cap ectangular Flange Model Model Model (NFPA MS) Trunnion Mounts Head Model Cap Model Intermediate Model (NFPA MS) Tie ods Extended oth Ends Model Cap End Model Head End Model (NFPA MF) (NFPA MF) Head Square Flange Cap Square Flange Model Model (HEAD NFPA MT) (CAP NFPA MT) (INTEMEDIATE NFPA MT) (NFPA MP) (OTH ENDS NFPA MX) (CAP END NFPA MX) (HEAD END NFPA MX) Cap Fixed Clevis Model Pivot Pin Included Cap Fixed Eye with Spherical earing Model (NFPA MF) od ushing Construction = olted ushing = etainer Held ushing *,, and not available in this bore size. Note: See How to Order page for bushing retainer dimensions. ore / / * od Dia. /,,,, / - /, / - /, - /, / (NFPA MF),,,,,,,,,,, N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Double End Construction (NFPA MPU) Available in all bore and rod combinations in the following models:,,,,, and ("-"). ("-") and (").

The inside story... Why JV Series is your best choice in medium-duty hydraulic cylinders. Secondary Seal Double- Service Wiperseal acts as a secondary pressure seal on the extend stroke and cleans the rod on the return stroke. olted ushing Assures true concentricity and allows removal without tie rod disassembly. Primary Seal Tuffseal Special polyurethane seal is a proven leakproof design, which incorporates the pressure-compensated unidirectional characteristics of a U CUP with the multiple edge sealing effectiveness of compression-type stacked-packings. Steel Head ored and grooved to provide concentricity for mating parts. Ports NPTF ports are standard. SAE ports available. End Seals Pressure-actuated cylinder body-to-head and cap O rings. Piston od Stud Furnished on " diameter rods and smaller when standard style rod end threads are required or on " diameter rods and smaller when style threads are required. Also available in times the catalog A dimension length. Studs have rolled threads and are made from high strength steel. Anaerobic adhesive is used to permanently lock the stud to the piston rod. Sleeve Design Spear Design Long earing Surface Is inboard of the seals, assuring positive lubrication from within the cylinder. An O ring is used as a seal between gland and head, and also serves as a prevailing torque-type lock. ushing material is nodular iron with flash tin plating through /" dia. rods. " and larger bushings are bronze. The Cylinder Tube Heavy-wall steel tubing, honed to a micro finish bore. Optional Adjustable Floating Stepped Cushions Adjustable Floating Stepped Cushions Optional at extra charge. For faster cycle time and increased productivity for maximum performance economical and flexible for even the most demanding applications reduces shock and machine noise lower maintenance costs can be supplied at head, cap or both ends. Adjustable Floating Cushions Cushions are optional and can be supplied at head end, cap end, or both ends without change in envelope or mounting dimensions. High Strength Tie ods Made from 00,000 psi minimum yield steel with rolled threads for added strength. Adjustable floating cushions Cushions are optional, and can be supplied at head end, cap end, or both ends without change in envelope or mounting dimensions. Cushions are adjustable. The JV Series cylinder design incorporates the longest cushion plungers that can be provided in the standard envelope without decreasing the rod bearing and piston bearing lengths. () When a cushion is specified at the head end: a. A self-centering plunger is supplied on the piston rod assembly. b. A needle valve is provided that is flush with the side of the head when wide open. It may be identified by the fact that it is socket-keyed. It is located on side number in all mountings except,, and. In these models it is located on side number. c. A springless check valve is provided that is also flush with the side of the head and is mounted on the face opposite the needle valve except on models,, and where it is mounted next to the needle valve. It may be identified by the fact that it is slotted. d. The check and needle valves are interchangeable in the head. () When a cushion is specified at the cap end: a. A cushion plunger is provided on the piston rod assembly. b. A Float Check self-centering bushing is provided which incorporates a large flow check valve for fast out-stroke action. c. A socket-keyed needle valve is provided that is flush with the side of the cap when wide open. It is located on side number in all mountings except,, and. In these models it is located on side number.

Piston od Medium carbon steel, induction case-hardened to c, hard chrome-plated and polished to 0 MS finish. Piston rods are made from 0,000 to 00,000 psi minimum yield material in /" through " diameters. Larger diameters vary between,000 and 0,000 psi minimum yield material, depending on rod diameter. The piston thread equals the catalog style # rod end thread for each rod diameter to assure proper piston-to-rod thread strength. Two wrench flats are provided for rod end attachment. Ports NPTF ports are standard. SAE ports available. Steel Cap ored and grooved to provide concentricity for mating parts. Step Cut Iron Piston ings are optional. Alloy Steel Tie od Nuts Piston with etainer Nut optional at extra charge. Align-A-Groove A /" wide surface machined at each end of the cylinder body. Makes precise mounting quick and easy. One-Piece Nodular Iron Piston The wide piston surface contacting cylinder bore reduces bearing loads. Anaerobic adhesive is used to permanently lock and seal the piston to the rod. Piston Lipseal Zero leakage under static conditions. Seals are selfcompensating to conform to variations in pressure, mechanical deflection, and wear. ackup washers prevent extrusion. Note: Threaded od ushings are supplied on cylinders with rod diameters over /". Cushion Length Cylinder ore (Inches) od Diameter* (Inches) / Cushion Length (Inches) Head* Cap Cylinder ore (Inches) od Diameter* (Inches) / Cushion Length (Inches) Head* Cap / / / / / / / / / / / / / / / / *Head end cushion for rod diameters not listed have cushion lengths within the limits shown.

Side Lug Mount " to " ore Sizes Side Lug Mount Model ", /", ", /", " and " ore With Maximum Oversize ods etainer Held ushing Side Lug Mount Model /" - " ore efore determining dimensions: See chart on page for cylinder rod combinations that have removable bushings. olted ushing

Side Lug Mount " to " ore Sizes Table Envelope and Mounting Dimensions EE (olt) ore E nptf o SAE F G J K LG P S SS ST SU SW TS US / / / / / / / / / # # 0 0 0 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / O NPTF ports will be furnished as standard unless SAE straight thread ports are specified. SAE straight thread ports are indicated by port number. On /", " and /" bore sizes the head end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of full threads available. " bore head is " x /". # Straight thread ports. On /" bore size an adapter fitting is required on cap end and on head end with maximum oversize rod. (See Straight Thread Port Adapter drawing.) Adapters are furnished as standard. Mounting holes are /" larger than bolt size listed. Cushion adjusting needle valve for " bore projects beyond sides of head and cap. Thread Table od End Dimensions and Envelope Dimensions Affected by od Size od Style Style +.000 Dia. & -.00 ore MM IM KK A C D NA V VA V W WF XS Y Z / / / / / / / / /-0 /-0 /-0 - /-0 - - - /- - /-0 - - - /- - - /- - - /- - - - - - - /- - - - - - - /- /-0 /-0 - /-0 - - - - - /-0 - /- - - - - - /- - - /- /- - - - - - - /- - - /- - / / / /.................................. / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / od End Dimensions see table Thread Style Small Male Thread Style Short Female Thread Style Intermediate Male IM Special Thread Style X Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style X and give desired dimensions for KK, A, W or WF. If otherwise special, furnish dimensioned sketch. Straight Thread Port Adapters Used on /" bore size only. A high strength rod end stud is supplied on thread style through " diameter rods and on thread style through " diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, style rod ends are recommended through " piston rod diameters and style rod ends are recommended on larger diameters. Use style for applications where female rod end threads are required. If rod end is not specified, style will be supplied.

Side Tap Mount " to " ore Sizes Side Tap Mount etainer Held ushing Model, /", ", /", " and " ore With Maximum Oversize ods Side Tap Mount Model /" - " ore olted ushing efore determining dimensions: See chart on page for cylinder rod combinations that have removable bushings. od End Dimensions see table Thread Style Small Male Thread Style Short Female Thread Style Intermediate Male IM Special Thread Style X Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style X and give desired dimensions for KK, A, W or WF. If otherwise special, furnish dimensioned sketch. Straight Thread Port Adapters Used on /" bore size only. A high strength rod end stud is supplied on thread style through " diameter rods and on thread style through " diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, style rod ends are recommended through " piston rod diameters and style rod ends are recommended on larger diameters. Use style for applications where female rod end threads are required. If rod end is not specified, style will be supplied.

Side Tap Mount " to " ore Sizes Table Envelope and Mounting Dimensions EE ore E nptf o SAE F G J K L LG NT P SN TN / / / / / / / / / # # 0 0 0 / / / / / / / / / / / 0- -0 /- - /- /- - -0 / / / / O NPTF ports will be furnished as standard unless SAE straight thread ports are specified. SAE straight thread ports are indicated by port number. Cushion adjusting needle valve for " bore projects beyond sides of head and cap. " bore head is " x /". On /", " and /" bore sizes the head end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of full threads available. # Straight thread ports. On /" bore size an adapter fitting is required on cap end and on head end with maximum oversize rod. (See Straight Thread Port Adapter drawing.) Adapters are furnished as standard. Table od End Dimensions and Envelope Dimensions Affected by od Size Thread od End Dimensions and Envelope Dimensions Affected by od Size od Style Style +.000 Dia. & -.00 ore MM IM KK A C D NA V VA V W WF XT Y Z ND / / /-0 /-0 /-0 /-0.. / / / / / / / / / / /-0 - /-0 -.. / / / / / / / / / / / /-0 - - - /-0 - - -.... / / / / / / / / / / / / / / / / / / / / / / / / / /- -. / / / / / / / - -. / / / / / /-0 - /-0 -.. / / / / / / / / / / / / - /-. / / / / / / - -. / / / / / / / / / / /- - - /- - - /- - - - - - - /- - - - - - - - - - - /- - - /- /- - - - - - - /- - - /- - / / / /.................... / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /

Head ectangular Flange Mount " to " ore Sizes Head ectangular Flange Mount Model " - " ore olted ushing UF D ACOSS FLATS A W C Y V Z + STOKE P + STOKE L + STOKE EE KK E MM NA E TF F HOLES SMALL MALE F WF G J K / " ore Cylinder Only Head End / Maximum Pressure atings Push Application (Model only) ore Dia. / / od Dia. / PSI 00 00 00 00 0 00 00 00 00 00 00 000 0 000 00 ore Dia. od Dia. / / / / / PSI 00 0 00 00 00 00 00 00 0 00 0 00 00 00 00 00 00 00 0 od End Dimensions see table Thread Style Small Male Thread Style Short Female Thread Style Intermediate Male IM Special Thread Style X Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style X and give desired dimensions for KK, A, W or WF. If otherwise special, furnish dimensioned sketch. Straight Thread Port Adapters Used on /" bore size only. A high strength rod end stud is supplied on thread style through " diameter rods and on thread style through " diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, style rod ends are recommended through " piston rod diameters and style rod ends are recommended on larger diameters. Use style for applications where female rod end threads are required. If rod end is not specified, style will be supplied. 0

Head ectangular Flange Mount " to " ore Sizes Table Envelope and Mounting Dimensions EE (olt) ore E nptf o SAE F F G J K L P TF UF / / / / / / / / / / # # 0 0 0 #0 / / / / / / / / / / / / / /.0......0. / / / / O NPTF ports will be furnished as standard unless SAE straight thread ports are specified. SAE straight thread ports are indicated by port number. Cushion adjusting needle valve for " bore projects beyond sides of head and cap. " bore head is " x /". On /", " and /" bore sizes the head end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of full threads available. # Straight thread ports on " bore size require an adapter fitting on the head end only. On /" bore size an adapter fitting is required on cap end and on head end with maximum oversize rod. (See Straight Thread Port Adapter drawing.) Adapters are furnished as standard. Note: Mounting holes are /" larger than bolt size listed. Table od End Dimensions and Envelope Dimensions Affected by od Size Thread od Extensions and Envelope Dimensions Affected by od Size od Style Style +.000 Dia. & -.00 ore MM IM KK A C D NA V W Y Z / / /-0 /-0 /- /-0.. / / / / / / /-0 - /-0 -.. / / / / / / / / /-0 - - - /-0 - - -.... / / / / / / / / / / / / / / / / / / /- -. / / / / / - -. / / / / / / / / /-0 - - - /- - - /- - - /- - - - - - - /- - - - - - - /-0 - /- - - - - - /- - - /- /- - - - - - - /- - - /- - / / / /........................ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /

Cap ectangular Flange Mount " to " ore Sizes Cap ectangular Flange Mount Model, /", ", /", " and " ore With Maximum Oversize ods D ACOSS FLATS A W C Y V ZF + STOKE P + STOKE L + STOKE EE etainer Held ushing UF KK MM E NA SMALL MALE K F G J F E TF F HOLES Cap ectangular Flange Mount Model /" - " ore efore determining dimensions: See chart on page for cylinder rod combinations that have removable bushings. olted ushing D ACOSS FLATS A C WF Y VA ZF + STOKE P + STOKE LG + STOKE EE UF KK MM E NA SMALL MALE K G J F E TF F HOLES od End Dimensions see table Thread Style Small Male Thread Style Short Female Thread Style Intermediate Male IM Special Thread Style X Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style X and give desired dimensions for KK, A, W or WF. If otherwise special, furnish dimensioned sketch. Straight Thread Port Adapters Used on /" bore size only. A high strength rod end stud is supplied on thread style through " diameter rods and on thread style through " diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, style rod ends are recommended through " piston rod diameters and style rod ends are recommended on larger diameters. Use style for applications where female rod end threads are required. If rod end is not specified, style will be supplied.

Cap ectangular Flange Mount " to " ore Sizes Table Envelope and Mounting Dimensions EE (olt) ore E nptf o SAE F F G J K L LG P TF UF / / / / / / / / # # 0 0 0 #0 / / / / / / / / / / / / / / /.0......0. / / / / O NPTF ports will be furnished as standard unless SAE straight thread ports are specified. SAE straight thread ports are indicated by port number. " bore heads and caps are " x /". On ", /", " and /" bore sizes the head end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of full threads available. Cushion adjusting needle valve for " bore projects beyond sides of head and cap. # Straight thread ports. On /" bore size an adapter fitting is required on cap end and on head end with maximum oversize rod. (See Straight Thread Port Adapter drawing.) Adapters are furnished as standard. Note: Mounting holes are /" larger than bolt size listed. Table od End Dimensions and Envelope Dimensions Affected by od Size Thread od End Dimensions and Envelope Dimensions Affected by od Size od Style Style +.000 Dia. & -.00 ore MM IM KK A C D NA V VA V W WF Y ZF / / /-0 /-0 /- /-0.. / / / / / / /-0 - /-0 -.. / / / / / / / /-0 - - - /-0 - - -.... / / / / / / / / / / / / / / /- -. / / / / - -. / / /-0 - /-0 -.. / / / / / / / - /-. / / / / - -. / / / / / / / / / /- - - /- - - /- - - - - - - /- - - - - - - - - - - /- - - /- /- - - - - - - /- - - /- - / / / /.................... / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /

Head Square Flange Mount Cap Square Flange Mount " to " ore Sizes Head Square Flange Mount Model " - " ore olted ushing UF E D ACOSS FLATS A W C Y Z + STOKE P + STOKE LG + STOKE EE KK V UF E TF MM SMALL MALE NA F HOLES TF F G J K Cap Square Flange Mount Model ", /", ", /", " and " ore With Maximum Oversize ods D ACOSS FLATS A W C Y V efore determining dimensions: See chart on page for cylinder rod combinations that have removable bushings. etainer Held ushing ZF + STOKE P + STOKE L + STOKE EE UF E KK MM TF E UF NA SMALL MALE K F G J F F HOLES TF Cap Square Flange Mount Model /" - " ore D ACOSS FLATS A C WF Y VA ZF + STOKE P + STOKE LG + STOKE EE olted ushing UF E KK MM TF E UF SMALL MALE NA K G J F F HOLES TF od End Dimensions see table Thread Style Small Male Thread Style Short Female Thread Style Intermediate Male IM Special Thread Style X Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style X and give desired dimensions for KK, A, W or WF. If otherwise special, furnish dimensioned sketch. Straight Thread Port Adapters Used on /" bore size only. A high strength rod end stud is supplied on thread style through " diameter rods and on thread style through " diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, style rod ends are recommended through " piston rod diameters and style rod ends are recommended on larger diameters. Use style for applications where female rod end threads are required. If rod end is not specified, style will be supplied.

Head Square Flange Mount Cap Square Flange Mount " to " ore Sizes Table Envelope and Mounting Dimensions EE (olt) ore E nptf o SAE F F G J K L LG P TF UF / / / / / / / / / # # 0 0 0 #0 / / / / / / / / / / / / / /.0......0. / / / / / O NPTF ports will be furnished as standard unless SAE straight thread ports are specified. SAE straight thread ports are indicated by port number. " bore head is " x /". On /", " and /" bore sizes the head end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of full threads available. Cushion adjusting needle valve for " bore projects beyond sides of head and cap. # Straight thread ports. On /" bore size an adapter fitting is required on cap end and on head end with maximum oversize rod. (See Straight Thread Port Adapter drawing.) Adapters are furnished as standard. Note: Mounting holes are /" larger than bolt size listed. Table od End Dimensions and Envelope Dimensions Affected by od Size Thread od End Dimensions and Envelope Dimensions Affected by od Size od Style Style +.000 Dia. & -.00 ore MM IM KK A C D NA V VA V W WF Y Z ZF / / / / / / / / /-0 /-0 /-0 - /-0 - - - /- - /-0 - - - /- - - /- - - /- - - - - - - /- - - - - - - /- /-0 /-0 - /-0 - - - - - /-0 - /- - - - - - /- - - /- /- - - - - - - /- - - /- - / / / / *For all Model and Model with max. oversized rods................................... / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / * / * /* /* * * /* * /* * * /* /* * /* /* * * * * /* /* / / * / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /

Tie ods Extended Mountings " to " ore Sizes Tie ods Extended etainer Held ushing oth Ends Mount Model ", /", ", /", " and " ore With Maximum Oversize ods E A W C Y V Z + STOKE P + STOKE L + STOKE EE AA E MM DD NA K F G J K Tie rods can be extended: oth Ends Model Cap End Model Head End Model All tie rod models can be dimensioned from Model drawings shown. efore determining dimensions: See chart on page for cylinder rod combinations that have removable bushings. Tie ods Extended oth Ends Mount Model /" - " ore olted ushing E A C WF Y VA Z + STOKE P + STOKE LG + STOKE EE AA E MM NA DD K G J K od End Dimensions see table Thread Style Small Male Thread Style Short Female Thread Style Intermediate Male IM Special Thread Style X Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style X and give desired dimensions for KK, A, W or WF. If otherwise special, furnish dimensioned sketch. Straight Thread Port Adapters Used on /" bore size only. A high strength rod end stud is supplied on thread style through " diameter rods and on thread style through " diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, style rod ends are recommended through " piston rod diameters and style rod ends are recommended on larger diameters. Use style for applications where female rod end threads are required. If rod end is not specified, style will be supplied.

Tie ods Extended Mountings " to " ore Sizes Table Envelope and Mounting Dimensions EE ore AA DD E NPTF O SAE F G J K L LG P / /..0...... / / 0- - /- /- - - /-0 /-0 / / / / / / / # # 0 0 0 / / / / / / / / / / /.0......0. O NPTF ports will be furnished as standard unless SAE straight thread ports are specified. SAE straight thread ports are indicated by port number. " bore head is " x /". On ", /", " and /" bore sizes the head end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of full threads available. / Cushion adjusting needle valve for " bore projects beyond sides of head and cap. # Straight thread ports. On /" bore size an adapter fitting is required on cap end and on head end with maximum oversize rod. (See Straight Thread Port Adapter drawing.) Adapters are furnished as standard. Table od End Dimensions and Envelope Dimensions Affected by od Size od Style Style +.000 Dia. & -.00 ore MM IM KK A F C D NA V VA V W WF Y Z / / / / / / / / /-0 /-0 /-0 - /-0 - - - /- - /-0 - - - /- - - /- - - /- - - - - - - /- - - - - - - Thread /- /-0 /-0 - /-0 - - - - - /-0 - /- - - - - - /- - - /- /- - - - - - - /- - - /- - / / / / od End Dimensions and Envelope Dimensions Affected by od Size.....................................................000.000....0..... / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /

Head Trunnion Mount " to " ore Sizes Head Trunnion Mount etainer Held ushing Model ", /", ", /", " and " ore With Maximum Oversize ods Head Trunnion Mount Model /" - " ore olted ushing efore determining dimensions: See chart on page for cylinder rod combinations that have removable bushings. od End Dimensions see table Thread Style Small Male Thread Style Short Female Thread Style Intermediate Male IM Special Thread Style X Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style X and give desired dimensions for KK, A, W or WF. If otherwise special, furnish dimensioned sketch. Straight Thread Port Adapters Used on /" bore size only. A high strength rod end stud is supplied on thread style through " diameter rods and on thread style through " diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, style rod ends are recommended through " piston rod diameters and style rod ends are recommended on larger diameters. Use style for applications where female rod end threads are required. If rod end is not specified, style will be supplied.

Head Trunnion Mount " to " ore Sizes Table Envelope and Mounting Dimensions EE +.000 TD ore E nptf O SAE F G J K LG P -.00 tl ut / / / / / / / / / # # 0 0 0 / / / / / / / / / / / /.0.000.000.000.000.000.000. / / / O NPTF ports will be furnished as standard unless SAE straight thread ports are specified. SAE straight thread ports are indicated by port number. " bore head is " x /". On /", " and /" bore sizes the head end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of full threads available. Cushion adjusting needle valve for " bore projects beyond sides of head and cap. # Straight thread ports. On /" bore size an adapter fitting is required on cap end and on head end with maximum oversize rod. (See Straight Thread Port Adapter drawing.) Adapters are furnished as standard. Table od End Dimensions and Envelope Dimensions Affected by od Size Thread od End Dimensions and Envelope Dimensions Affected by od Size od Style Style +.000 Dia. & -.00 ore MM IM KK A C D NA V VA V W WF XG Y Z / / / / / / / / /-0 /-0 /-0 - /-0 - - - /- - /-0 - - - /- - - /- - - /- - - - - - - /- - - - - - - /- /-0 /-0 - /-0 - - - - - /-0 - /- - - - - - /- - - /- /- - - - - - - /- - - /- - / / / /.................................. / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /

Cap Trunnion Mount " to " ore Sizes Cap Trunnion Mount Model ", /", ", /", " and " ore With Maximum Oversize ods etainer Held ushing Cap Trunnion Mount Model /" - " ore olted ushing efore determining dimensions: See chart on page for cylinder rod combinations that have removable bushings. od End Dimensions see table Thread Style Small Male Thread Style Short Female Thread Style Intermediate Male IM Special Straight Thread Thread Style X Port Adapters Special thread, extension, Used on /" bore size only. rod eye, blank, etc., are also available. To order, specify Style X and give desired dimensions for KK, A, W or WF. If otherwise special, furnish dimensioned sketch. A high strength rod end stud is supplied on thread style through " diameter rods and on thread style through " diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, style rod ends are recommended through " piston rod diameters and style rod ends are recommended on larger diameters. Use style for applications where female rod end threads are required. If rod end is not specified, style will be supplied. 0

Cap Trunnion Mount " to " ore Sizes Table Envelope and Mounting Dimensions EE ore E nptf O SAE F G J K LG P +.000 TD -.00 tl ut / / / / / / / / / # # 0 0 0 / / / / / / / / / / / /.0.000.000.000.000.000.000. / / / O NPTF ports will be furnished as standard unless SAE straight thread ports are specified. SAE straight thread ports are indicated by port number. " bore head is " x /". On /", " and /" bore sizes the head end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of full threads available. Table od End Dimensions and Envelope Dimensions Affected by od Size / / Cushion adjusting needle valve for " bore projects beyond sides of head and cap. # Straight thread ports. On /" bore size an adapter fitting is required on cap end and on head end with maximum oversize rod. (See Straight Thread Port Adapter drawing.) Adapters are furnished as standard. Thread od End Dimensions and Envelope Dimensions Affected by od Size od Style Style +.000 Dia. & -.00 ore MM IM KK A C D NA V VA V W WF XJ Y Z / / / / / / /-0 /-0 /-0 - /-0 - - - /- - /-0 - - - /- - - /- - - /- - - - - - - /- - - - - - - /- /-0 /-0 - /-0 - - - - - /-0 - /- - - - - - /- - - /- /- - - - - - - /- - - /- - / / / /.................................. / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /

Intermediate Trunnion Mount /" to " ore Sizes Intermediate Trunnion Mount Model /", ", /", " and " ore With Maximum Oversize ods etainer Held ushing Dimension XI to be specified by customer. Intermediate Trunnion Mount Model /" - " ore olted ushing efore determining dimensions: See chart on page for cylinder rod combinations that have removable bushings. Dimension XI to be specified by customer. od End Dimensions see table Thread Style Small Male Thread Style Short Female Thread Style Intermediate Male IM Special Thread Style X Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style X and give desired dimensions for KK, A, W or WF. If otherwise special, furnish dimensioned sketch. Straight Thread Port Adapters Used on /" bore size only. A high strength rod end stud is supplied on thread style through " diameter rods and on thread style through " diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, style rod ends are recommended through " piston rod diameters and style rod ends are recommended on larger diameters. Use style for applications where female rod end threads are required. If rod end is not specified, style will be supplied.

Intermediate Trunnion Mount /" to " ore Sizes Table Envelope and Mounting Dimensions EE +.000 TD ore D E nptf O SAE F G J K LG P -.00 tl TM UM UV / / / / / / / / / / / / # # 0 0 0 / / / / / / / / /.000.000.000.000.000.000. / / / / / / 0 / / O NPTF ports will be furnished as standard unless SAE straight thread ports are specified. SAE straight thread ports are indicated by port number. On ", /", " and /" bore sizes the head end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of full threads available. Min. Stroke / # Straight thread ports on " bore size require an adapter fitting on the head end only. On /" bore size an adapter fitting is required on cap end and on head end with maximum oversize rod. (See Straight Thread Port Adapter drawing.) Adapters are furnished as standard. Table od End Dimensions and Envelope Dimensions Affected by od Size Thread od End Dimensions and Envelope Dimensions Affected by od Size od Style Style +.000 Dia. & -.00 Min ore MM IM KK A C D NA V VA V W WF XI Y Z / / / / / / / /-0 - /-0 - - - /- - /-0 - - - /- - - /- - - /- - - - - - - /- - - - - - - Dimension XI to be specified by customer. /-0 - /-0 - - - - - /-0 - /- - - - - - /- - - /- /- - - - - - - /- - - /- - / / / /................................ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /

Cap Fixed Clevis Mount Model ", /", ", /", " and " ore With Maximum Oversize ods Cap Fixed Clevis Mount " to " ore Sizes etainer Held ushing Note: Cap tie rod nuts not on /", ", /" and " bores. Cap Fixed Clevis Mount Model /" - " ore efore determining dimensions: See chart on page for cylinder rod combinations that have removable bushings. olted ushing Note: Cap tie rod nuts not on /", ", /" and " bores. od End Dimensions see table Thread Style Small Male Thread Style Short Female Thread Style Intermediate Male IM Special Thread Style X Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style X and give desired dimensions for KK, A, W or WF. If otherwise special, furnish dimensioned sketch. Straight Thread Port Adapters Used on /" bore size only. A high strength rod end stud is supplied on thread style through " diameter rods and on thread style through " diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, style rod ends are recommended through " piston rod diameters and style rod ends are recommended on larger diameters. Use style for applications where female rod end threads are required. If rod end is not specified, style will be supplied.

Cap Fixed Clevis Mount " to " ore Sizes Table Envelope and Mounting Dimensions +.000 CD ore C -.00 CW EE E nptf o SAE F G J K L LG L M M P / / /..0.0.0....00 / / / / / / / / / / # # 0 0 0 / / / / / / / / / / / / / / / / / / / / / / / / O NPTF ports will be furnished as standard unless SAE straight thread ports are specified. SAE straight thread ports are indicated by port number. " bore head is " x /". On /", " and /" bore sizes the head end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of full threads available. Dimension CD is pin diameter except in " bore. Table od End Dimensions and Envelope Dimensions Affected by od Size od Style Style +.000 Dia. & -.00 ore MM IM KK A C D NA V VA V W WF XC Y ZC / / / / / / / / /-0 /-0 /-0 - /-0 - - - /- - /-0 - - - /- - - /- - - /- - - - - - - /- - - - - - - Thread /- /-0 /-0 - /-0 - - - - - /-0 - /- - - - - - /- - - /- /- - - - - - - /- - - /- - / / / / od End Dimensions and Envelope Dimensions Affected by od Size.................................. / / / / / / / / / / / / / / / / / / / / / / # Straight thread ports. On /" bore size an adapter fitting is required on cap end and on head end with maximum oversize rod. (See Straight Thread Port Adapter drawing.) Adapters are furnished as standard. In " bore size only, a single fixed eye mounting /" thick is used. Dimension CD (.") is hole diameter pin not supplied. Cushion adjusting needle valve for " bore projects beyond sides of head and cap. / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /

Notes NOTES

Notes NOTES

Double od End Cylinders " to " ore Sizes Double od End Cylinders etainer Held ushing E D ACOSS FLATS A W C Y V ZM + X STOKE P + STOKE LD + STOKE EE W + STOKE KK AA Model & Model E MM NA F G G F K Model Note: The basic double rod cylinder dimensions are shown on this and facing page. For specific mounting dimensions, refer to pages for single rod cylinder. Exception: Model SS. olted ushing Model Model E D ACOSS FLATS A Y WF C VA ZM + X STOKE P + STOKE LF + STOKE EE WF + STOKE AA KK E MM F NA G G K Model Model od End Dimensions see table Thread Style Small Male Thread Style Short Female Thread Style Intermediate Male IM Special Thread Style X Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style X and give desired dimensions for KK, A, W or WF. If otherwise special, furnish dimensioned sketch. Straight Thread Port Adapters Used on /" bore size only. A high strength rod end stud is supplied on thread style through " diameter rods and on thread style through " diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, style rod ends are recommended through " piston rod diameters and style rod ends are recommended on larger diameters. Use style for applications where female rod end threads are required. If rod end is not specified, style will be supplied.

Double od End Cylinders " to " ore Sizes EE ore E nptf O SAE F G K LD LF P SA SS / / / / / / / / / # # 0 0 0 / / / / / / / / / / / / / O NPTF ports will be furnished as standard unless SAE straight thread ports are specified. SAE straight thread ports are indicated by port number. " bore head is " x /". On /", " and /" bore sizes the head end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of full threads available. # Straight thread ports. On /" bore size an adapter fitting is required on cap end and on head end with maximum oversize rod. (See Straight Thread Port Adapter drawing.) Adapters are furnished as standard. Cushion adjusting needle valve for " bore projects beyond sides of head and cap. How to Use Double od Cylinder Dimension Drawings To determine dimensions for a double rod cylinder, first refer to the desired single rod mounting style cylinder shown on preceding pages of this catalog. After selecting necessary dimensions from that drawing, return to this page and supplement the single rod dimensions with those shown below. Note that double rod cylinders have a head (Dim. G) at both ends and that dimension LD replaces L. The double rod dimensions differ from, or are in addition to those for single rod cylinders shown on preceding pages and provide the information needed to completely dimension a double rod cylinder. On a double rod cylinder where the two ends are different, be sure to clearly state which rod end is to be assembled at which end. Port position is standard. If other than standard, specify position, or when viewed from one end only. Table od End Dimensions and Envelope Dimensions Affected by od Size od Style Style +.000 Dia. & -.00 ore MM IM KK A F C D NA V VA V W WF Y ZM / / / / / / / / /-0 /-0 /-0 - /-0 - - - /- - /-0 - - - /- - - /- - - /- - - - - - - /- - - - - - - Thread /- /-0 /-0 - /-0 - - - - - /-0 - /- - - - - - /- - - /- /- - - - - - - /- - - /- - / / / / od End Dimensions and Envelope Dimensions Affected by od Size.......................................................... / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 0 / 0 0 0

Tie ods Extended Mountings Head Square Mount Cap Square Mount " ore Size Tie ods Extended Mount Model Model, Head Tie ods Extended, illustrated: Model Cap Tie ods Extended; and Model. oth Ends Tie ods Extended are also available. All Extended Tie ods can be dimensioned from Model drawing at right. E E AA MM DD W Y Z + STOKE P + STOKE L + STOKE EE TT SQ. F WF Model and Model not offered in " bore size, rod diameter /", ",and /". G J K Head Square Mount Model E W Y Z + STOKE P + STOKE L + STOKE EE E TE MM TT SQ. TE E HOLES F WF G J K Cap Square Mount Model W Y ZJ + STOKE P + STOKE L + STOKE EE E MM TE E K F G XK + STOKE J TE E HOLES od End Dimensions see tables & Thread Style Small Male Thread Style Short Female A high strength rod end stud is supplied on thread style through " diameter rods and on thread style through " diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, style rod ends are Thread Style Intermediate Male IM recommended through " piston rod diameters and style rod ends are recommended on larger diameters. Use style for applications where female rod end threads are required. If rod end is not specified, style will be supplied. Special Thread Style X Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style X and give desired dimensions for KK, A, W or WF. If otherwise special, furnish dimensioned sketch. 0

Table Envelope and Mounting DimensionsModel Tie ods Extended Mountings Head Square Mount Cap Square Mount " ore Size EE Add Stroke ore AA DD E NPTF O SAE F G J K L P. / - / / /. O NPTF ports will be furnished as standard unless SAE straight thread ports are specified. SAE straight thread ports are indicated by port number. Table od End DimensionsModel od Style Style +.000 Dia. & -.00 ore MM IM KK A C D LA NA V W TT WF Y Z / / / / - - - - - - - /- - - Thread /- - - - /- - - - - /- / / / / od Extensions and Pilot Dimensions.......... / / / / / / / / / / / / / / / / / / / / / / / / / Table Envelope and Mounting Dimensions / / / / / / / / / / / / / Add Stroke / / / / / / / / / / Table Envelope and Mounting DimensionsModel and Model E** EE Add Stroke ore E (OLT) NPTF O SAE F G J K TE L P / / /. O NPTF ports will be furnished as standard unless SAE straight thread ports are specified. SAE straight thread ports are indicated by port number. **Mounting hole is /" larger than bolt size listed. Table od End DimensionsModel and Model od Style Style +.000 Dia. & -.00 ore MM IM KK A C D LA NA V W TT WF Y XK Z ZJ / / / / Thread - - - - - - - /- - - /- - - - /- - - - - /- / / / / od Extensions and Pilot Dimensions.......... / / / / / / / / / / / / / / / / / / / / / / / / / Table Envelope and Mounting Dimensions / / / / / / / / / / / / / / Add Stroke / / / / / / / / / /

Side Lug Mount Side Tap Mount " ore Size Side Lug Mount Model Side Tap Mount Model od End Dimensions see tables & Thread Style Small Male Thread Style Short Female A high strength rod end stud is supplied on thread style through " diameter rods and on thread style through " diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, style rod ends are Thread Style Intermediate Male IM recommended through " piston rod diameters and style rod ends are recommended on larger diameters. Use style for applications where female rod end threads are required. If rod end is not specified, style will be supplied. Special Thread Style X Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style X and give desired dimensions for KK, A, W. If otherwise special, furnish dimensioned sketch.

Table Envelope and Mounting DimensionsModel Side Lug Mount Side Tap Mount " ore Size EE S Add Stroke ore E NPTF O SAE F G J K (OLT) ST SU SW TS US L P SS / / O NPTF ports will be furnished as standard unless SAE straight thread ports are specified. SAE straight thread ports are indicated by port number. Mounting hole is /" larger than bolt size listed. / / / Table od End DimensionsModel od Style Style +.000 Dia. & -.00 ore MM IM KK A C D LA NA V W TT XS Y Z / / / / - - - - - - - /- - - Thread /- - - - /- - - - - /- / / / / od Extensions and Pilot Dimensions.......... / / / / / / / / / / / / / / / / / / / / / / / / / Table Envelope and Mounting Dimensions / / / / / / / / / / / / / / / / / / / / / / / Add Stroke / / / / / / / / / / Table Envelope and Mounting DimensionsModel EE Add Stroke ore E NPTF O SAE F G J K ND NT TN L P SN / / / -0 / O NPTF ports will be furnished as standard unless SAE straight thread ports are specified. SAE straight thread ports are indicated by port number. Table od End DimensionsModel od Style Style +.000 Dia. & -.00 ore MM IM KK A C D LA NA V W TT XT Y Z / / / / - - - - - - - /- - - Thread /- - - - /- - - - - /- / / / / od Extensions and Pilot Dimensions.......... / / / / / / / / / / / / / / / / / / / / / / / / / Table Envelope and Mounting Dimensions / / / / / / / / / / / / / / / / / / / / / / / Add Stroke / / / / / / / / / /

Cap Fixed Clevis Mount " ore Size Cap Fixed Clevis Mount Model od End Dimensions see table Thread Style Small Male Thread Style Short Female A high strength rod end stud is supplied on thread style through " diameter rods and on thread style through " diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, style rod ends are Thread Style Intermediate Male IM recommended through " piston rod diameters and style rod ends are recommended on larger diameters. Use style for applications where female rod end threads are required. If rod end is not specified, style will be supplied. Special Thread Style X Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style X and give desired dimensions for KK, A, W. If otherwise special, furnish dimensioned sketch.

Cap Fixed Clevis Mount " ore Size Table Envelope and Mounting DimensionsModel +.000 EE -.00 Add Stroke ore C CD CW E NPTF O SAE F G J K L L M M L P /.00 / / / / / O NPTF ports will be furnished as standard unless SAE straight thread ports are specified. SAE straight thread ports are indicated by port number. Dimension CD is pin diameter. Table od End DimensionsModel od +.000 Dia. -.00 ore MM CC KK A C D LA NA V W Y XC ZC / / / / - - - - - - - /- - - Thread /- - - - /- - - - - /- / / / / od Extensions and Pilot Dimensions.......... / / / / / / / / / / / / / / / / / / / / / / / / / Table Envelope and Mounting Dimensions / / / / / / / / / / Add Stroke / /

Head Trunnion Mount Cap Trunnion Mount Intermediate Trunnion Mount " ore Size Head Trunnion Mount Model Cap Trunnion Mount Model Intermediate Trunnion Mount Model Dimension XI to be specified by customer. od End Dimensions see table Thread Style Small Male Thread Style Short Female A high strength rod end stud is supplied on thread style through " diameter rods and on thread style through " diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, style rod ends are Thread Style Intermediate Male IM recommended through " piston rod diameters and style rod ends are recommended on larger diameters. Use style for applications where female rod end threads are required. If rod end is not specified, style will be supplied. Special Thread Style X Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style X and give desired dimensions for KK, A, W. If otherwise special, furnish dimensioned sketch.

Table Envelope and Mounting DimensionsModel and Model EE +.000 -.00 Add Stroke ore E NPTF O SAE F G J K TD TL UT L P / / /. O NPTF ports will be furnished as standard unless SAE straight thread ports are specified. SAE straight thread ports are indicated by port number. Head Trunnion Mount Cap Trunnion Mount Intermediate Trunnion Mount " ore Size Table od End DimensionsModel and Model od Style Style +.000 Dia. & -.00 ore MM IM KK A C D LA NA V W TT XG Y XJ Z / / / / - - - - - - - /- - - Thread /- - - - /- - - - - /- / / / / od Extensions and Pilot Dimensions.......... / / / / / / / / / / / / / / / / / / / / / / / / / Table Envelope and Mounting Dimensions / / / / / / / / / / / / / Add Stroke / / / / / / / / / / Table Envelope and Mounting DimensionsModel EE +.000 -.00 Add Stroke ore D E NPTF O SAE F G J K TD TL TM UM UV L P / / / /. / / O NPTF ports will be furnished as standard unless SAE straight thread ports are specified. SAE straight thread ports are indicated by port number. Style DD Min. Stroke Table od End DimensionsModel Table Envelope and Mounting Dimensions Thread od Extensions and Pilot Dimensions Add Stroke od Style Style +.000 Dia. & -.00 Min. ore MM IM KK A C D LA NA V W TT XI Y Z - /-. / / / / / / / - - /. / / / / / / - -. / / / / / / / - - /. / / / / / / / - - /. / / / / / / - -. / / / / / / / - -. / / / / / /- -. / / / / / / - - /. / / / / / - /-. / / / / / / Dimension XI to be specified by customer.

How to Use Double od Cylinder Dimension Drawings To determine dimensions for a double rod cylinder, first refer to the desired single rod mounting style cylinder shown on preceding pages of this catalog. After selecting necessary dimensions from that drawing, return to this page, supplement the single rod dimensions with those shown on the drawing and dimension table. Note that double rod cylinders have a head (Dim. G) at both ends and that dimension LD replaces L. The double rod dimensions differ from, or are in addition to, those for single rod cylinders shown on preceding pages and provide the information needed to completely dimension a double rod cylinder. On a double rod cylinder where the two rod ends are different, be sure to clearly state which rod end is to be assembled at which end. Port position is standard. If other than standard, specify pos.,, or when viewed from one end only. MM W Y " ore ZM + X STOKE P + STOKE LD + STOKE EE Double od End Cylinders WF F G G F K Table Envelope and Mounting Dimensions EE ore E (NPTF) F G K LD P SA SS / / Table od End Dimensions od Style Style +.000 Dia. & -.00 ore MM IM KK A C D NA V W WF Y ZM / / / / - - - - - - - /- - - Thread /- - - - /- - - - - /- / / / /.......... od Extensions and Pilot Dimensions / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 0 0 0 0 0 0 0 od End Dimensions see table Thread Style Small Male Thread Style Short Female A high strength rod end stud is supplied on thread style through " diameter rods and on thread style through " diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, style rod ends are Thread Style Intermediate Male IM recommended through " piston rod diameters and style rod ends are recommended on larger diameters. Use style for applications where female rod end threads are required. If rod end is not specified, style will be supplied. Special Thread Style X Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style X and give desired dimensions for KK, A, W. If otherwise special, furnish dimensioned sketch.

Linear Alignment Couplers Linear Alignment Couplers are available in standard thread sizes... Cost Saving Features and enefits Include... Maximum reliability for trouble-free operation, long life and lower operating costs Increased cylinder life by reducing wear on piston and rod bearings Simplifying cylinder installation and reducing assembly costs Increase rod bearing and rod seal life for lower maintenance costs Alignment Coupler See Table for Part Numbers and Dimensions Table Part Numbers and Dimensions Part No. 00 00 00 000 00 00 00 000 0 0 00 0 0 A /- - /-0 /-0 - - - - - - /- - - / C / / D / / E / / F / / / / / / / G / / / / / / H / / / / / J / / K / / / / / / / / / / Max. Pull Load (lbs.) 00 0 0 00 00 0 000 000 0 0 0 Approx. Weight (lbs.)............. How to Order Linear Alignment Couplers When ordering a cylinder with a threaded male rod end, specify the coupler of equal thread size by part number as listed in Table, i.e.; Piston od KK dimension is " - ", specify coupler part number 00.

od Clevis Cylinder Accessories Cylinder Accessories Miller Fluid Power offers a complete range of cylinder accessories to assure you of greatest versatility in present or future cylinder applications. od End Accessories Accessories offered for the rod end of the cylinder include od Clevis, Eye racket, od Eye, Clevis racket and Pivot Pin. To select the proper part number for any desired accessory, refer to Chart A below and look opposite the thread size of the rod end as indicated in the first column. The Pivot Pins, Eye rackets and Clevis rackets are listed opposite the thread size which their mating od Eyes or Clevises fit. Chart A Mating Parts Mating Parts Thread od Eye Clevis Alignment Size Clevis racket Pin od Eye racket Pin Coupler /- /-0 /-0 - - - - - - 00 0 0 0 0 0 0 * * * 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 00 000 00 00 00 000 000 0-0 0 0 /- - - - /- - - /- - /- 0 0 0 0 00 0 0 0 0 * * * * * * 0 0 0 0 0 00 0 0 0 00 0 0 Consult Factory *Cylinder accessory dimensions conform to NFPA recommended standard NFPA/T.. -, NFPA recommended standard fluid power systems cylinder dimensions for accessories for cataloged square head industrial types. Note: For economical accessory selection, it is recommended that rod end style be specified on your cylinder order. Accessory Load Capacity The various accessories on these pages have been load rated for your convenience. The load capacity in lbs. shown, is the recommended maximum load for that accessory based on a : design factor in tension. (Pivot Pin is rated in shear.) efore specifying, compare the actual load or the tension (pull) force at maximum operating pressure of the cylinder with the load capacity of the accessory you plan to use. If load or pull force of cylinder exceeds load capacity of accessory, consult factory. Chart Eye racket Part No. 0 * JV Series ore Size " /", ", /" ", ", " ", " Use Clevis racket P/N 0 for " bore single lug Model. Eye rackets Eye rackets for Model (clevis mounted) cylinders are offered. To select proper part number for your application, refer to Chart. od Eye Clevis racket Eye racket Order to fit thread size. Order to fit thread size. Order to fit od Eye.. When used to mate with the od Clevis, select from Chart A.. When used to mount the Model cylinders, select from Chart at lower left. Pivot Pin. Pivot Pins are furnished with Clevis Mounted Cylinders as standard.. Pivot Pins are furnished with () etainer ings.. Pivot Pins must be ordered as a separate item if to be used with od Eyes, od Clevises, or Clevis rackets. 0

Cylinder Accessories A C CD CE CW E KK Load Capacity Lbs. O 00 0 / / / / / /- 00 / / / / /-0 0 / / / / /-0 00 0-00 - 00 0 / / - 00 0 / / - 00 / - 00 od Clevis Part Number 0 0 / / - - /- 00 00 00 0 / / - 00 0 / / - 00 0 00 0 0 0 0 / / / / / / / / / / / / / / / / - /- - - /- - 00 00 00 00 00 00 A CA C CD E KK Load Capacity Lbs.O 0 / / / / /- 00 0 / / / /-0 000 00 / / / /-0 00 0 / / - 00 0 / / - 000 0 / / / - 00 0 / / - 00 od Eye Part Number 0 0 0 / / / / / / /- - - 000 00 000 0 / / / / - 00 0 / /- 0000 00 / / - 00 / / / - 00 / / /- 00 / / / - 00 / / /- 000 C CD CW DD E F FL L M M Load Capacity Lbs.O 0 / / / /. 00 0 / / / / / / /. 00 0 / / /. 000 0 / / / /. 00 0 / / /. 00 Clevis racket Part Number 0 / / / /.0 000 0 / / / / /.0 000 / / / / / /.0 00 / / /.0 00 / / / /.0 00 / / / / / /.00 00 / / / / /. 000 / / / /. 000 C CD DD E F FL L M M Load Capacity Lbs.O 0 / / / /. 00 / / / / /. 00 / /. 000 * / / / /. 000 Eye racket Part Number * / /. 00 / /. 0 * / / / / / /. 0000 * / / / /. 00 * / /.0 00 / / / / /. 00 / / / / /. 000 CD CL Shear Capacity Lbs.O 0 / / 00 / 00 00 0 00 000 / 000 Pivot Pin Part Number / / 00 00 / / 00 000 000 / 000 00 *Cylinder accessory dimensions conform to NFPA recommended standard NFPA/T.. -, NFPA recommended standard fluid power systems cylinder dimensions for acces sories for cataloged square head industrial types. O See Accessory Load Capacity note on opposite page. This size supplied with cotter pins. Includes Pivot Pin. 00

Spherical earing Mount /" to " ore Sizes Spherical earings For JV Series Cylinders Spherical earing Mount That Maintains Alignment Through Push and Pull Strokes. enefits Are... Simplify installation of cylinder educe cylinder friction Increase rod bearing and rod seal life Simplify machine design problems Eliminate side loading in hard to align applications Increase cylinder life by reducing wear on piston and rod bearings Save assembly time Maintain alignment through push and pull strokes JV Series hydraulic cylinders are available with spherical bearing mounts at both ends or head and cap end only. The bearing at the cap end is housed in a single stud ear welded to the cap to form an integral structure. At the head end the bearing is mounted in a steel rod eye threaded to the piston rod. Grease fittings are provided for lubrication. The spherical bearing mount provides swivel connections at both ends of the cylinder to reduce misalignment problems and to maintain alignment through push and pull strokes. The bearing races are designed primarily for radial loads and moderate misalignment not to exceed angle a as shown in Table on the next page. The accessories, rod eye, pivot pin and clevis brackets are all designed to take maximum loading of the cylinder.