Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 18438 02 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 11.03.2014 to 10.03.2019 Holder of certificate: Jürgen Egly zerstörungsfreie Werkstoffprüfung Siemensstraße 33, 67227 Frankenthal Tests in the fields: manual non destructive testing (radiographic, ultrasonic, penetrant, magnetic particle, visual testing) and mobile hardness tests at metallic materials of metallurgical and metal working plant as well as in system engineering and plant technology, structural steel and bridge construction and in pipeline construction Abbreviations used: see last page The laboratory is permitted, without being required to inform and obtain prior approval from DAkkS, to use standard test methods listed here with different issue dates or revision status updates. The laboratory maintains a current list of all test methods in a flexible scope of accreditation. 1 Radiographic testing DIN EN 444 1994 04 DIN EN 1435 DIN EN ISO 17636 1 2013 05 Non destructive testing General principles for the radiographic examination of metallic materials using X rays and gamma rays Radiographic testing of welded joints Radiographic testing Part 1: X and gamma ray techniques with film This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/7
DIN EN ISO 10893 6 2011 07 DIN EN 12681 2003 06 Non destructive testing of steel tubes Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections Founding Radiographic examination DIN EN 12517 1998 03 DIN EN 12517 1 2006 06 DIN EN 12517 2 2008 12 Non destructive examination of welds Radiographic examination of welded joints Acceptance levels Part 1: Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography Acceptance levels Non destructive testing of welds Part 2: Evaluation of welded joints in aluminium and its alloys by radiography Acceptance levels 2 Ultrasonic testing DIN EN 583 1 1998 12 DIN EN 583 2 2001 04 DIN EN 583 3 1997 06 DIN EN 583 4 2002 12 DIN EN 583 5 2001 02 DIN EN 1714 Non destructive testing Ultrasonic examination Part 1: General principles Non destructuve testing Ultrasonic examination Part 2: Sensitivity and range setting Non destructive testing Ultrasonic testing Part 3: Transmission technique Non destructive testing Ultrasonic examination Part 4: Examination for discontinuities perpendicular to the surface Non destructive testing Ultrasonic examination Part 5: Characterization and sizing of discontinuities testing of welded joints Period of validity: 11.03.2014 to 10.03.2019 Translation 2/7
DIN EN 10160 1999 09 DIN EN 10228 3 1998 07 DIN EN 10228 4 1999 10 DIN EN 10308 2002 03 DIN EN 12680 1 2003 06 DIN EN 12680 2 2003 06 DIN EN 12680 3 2012 02 DIN EN 14127 2011 04 Ultrasonic testing of steel flat product of thickness equal to or greater than 6 mm (reflection method) Non destructive testing of steel forgings Part 3: Ultrasonic testing of ferritic or martensitic steel forgings Non destructive testing of steel forgings Part 4: Ultrasonic testing of austenitic and austenitic ferritic stainless steel forgings Non destructive testing Ultrasonic testing of steel bars Founding Ultrasonic examination Part 1: Steel castings for general purposes Founding Ultrasonic examination Part 2: Steel castings for highly stressed components Founding Ultrasonic testing Part 3: Spheroidal graphite cast iron castings Non destructive testing Ultrasonic thickness measurement DIN EN ISO 17640 2011 04 DIN EN 1712 DIN EN ISO 11666 2011 04 DIN EN 1713 DIN EN ISO 23279 2010 08 testing Techniques, testing levels, and assessment testing of welded joints Acceptance levels testing Acceptance levels testing Characterization of indications in welds testing Characterization of indications in welds Period of validity: 11.03.2014 to 10.03.2019 Translation 3/7
3 Liquid penetrant testing DIN EN ISO 3452 1 2013 09 DIN EN 571 1 1997 03 DIN EN 1371 1 2012 02 DIN EN 1371 2 1998 07 DIN EN 10228 2 1998 06 DIN EN ISO 10893 4 2011 07 Non destructive testing Penetrant testing Part 1: General principles Non destructive testing Penetrant testing Part 1: General principles Founding Liquid penetrant testing Part 1: Sand, gravity die and low pressure die castings Founding Liquid penetrant inspection Part 2: Investment castings Non destructive testing of steel forgings Part 2: Penetrant testing Non destructive testing of steel tubes Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections DIN EN ISO 23277 2010 03 DIN EN 1289 Penetrant testing of welds Acceptance levels Penetrant testing of welds Acceptance levels 4 Magnetic particle testing DIN EN ISO 9934 1 2002 03 DIN EN ISO 17638 2010 03 DIN EN 1290 Non destructive testing Magnetic particle testing Part 1: General principles Magnetic particle testing Magnetic particle testing of welds Period of validity: 11.03.2014 to 10.03.2019 Translation 4/7
DIN EN 1369 2013 01 DIN EN 10228 1 1999 07 DIN EN ISO 10893 5 2011 07 Founding Magnetic particle testing Non destructive testing of steel forgings Part 1: Magnetic particle inspection Non destructive testing of steel tubes Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections DIN EN ISO 23278 2010 03 DIN EN 1291 Magnetic particle testing of welds Acceptance levels Magnetic particle testing of welds Acceptance levels (withdrawn standard) 5 Visual testing DIN EN ISO 17637 2011 05 DIN EN 13018 2001 07 DIN EN 970 1997 03 Visual testing of fusion welded joints Non destructive testing Visual testing General principles Non destructive examination of fusion welds Visual examination 6 Cross standards for NDT DIN EN 10163 1 2005 03 DIN EN 10163 2 2005 03 DIN EN 10163 3 2005 03 Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections Part 1: General requirements Delivery requirements for surface conditions of hot rolled steel plates, wide flats and sections Part 2: Plate and wide flats Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections Part 3: Sections Period of validity: 11.03.2014 to 10.03.2019 Translation 5/7
DIN EN 13480 5 2012 11 DIN EN 12952 5 2012 01 DIN EN 12952 6 2011 10 AD 2000 Merkblatt HP 5/3 2010 02 ASME Code, Section V 2010 DIN EN 12062 DIN EN ISO 17635 2010 08 DIN EN 1559 2 2000 04 DIN 1690 2 1985 06 Metallic industrial piping Part 5: Inspection and testing Water tube boilers and auxiliary installations Part 5: Workmanship and construction of pressure parts of the boiler Water tube boilers and auxiliary installations Part 6: Inspection during construction documentation and marking of pressure parts of the boiler Manufacture and testing of joints Non destructive testing of welded joints ASME Boiler and Pressure Vessel Code Section V Nondestructice Examination Subsection A: Article 1: General Requirements Article 2: Radiographic Examination Article 4: Ultrasonic Examination Methods for welds Article 5: Ultrasonic Examination Methods for materials Article 6: Liquid Penetrant Examination Article 7: Magnetic Particle Examination Article 9: Visual Examination Subsection B: Article 22: Radiographic Standards Article 23: Ultrasonic Standards Article 24: Liquid Penetrant Standards Article 25: Magnetic Particle Standards General rules for metallic materials General rules for metallic materials Founding Technical conditions of delivery Part 2: Additional requirements for steel castings Technical delivery conditions for castings made from metallic materials steel castings classification into severity levels on the basis of non destructive testing Period of validity: 11.03.2014 to 10.03.2019 Translation 6/7
DIN 1690 10 1991 01 DIN EN 1090 2 2011 10 DIN EN 13445 5 2012 12 DIN EN ISO 6520 1 2007 11 Technical delivery conditions for castings of metallic materials supplementary requirements for steel castings used for heavyduty valves Execution of steel structures and aluminium structures Part 2: Technical requirements for steel structures Unfired pressure vessels Part 5: Inspection and testing Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding 7 Hardness testing DIN 50159 1 2008 10 Metallic materials Hardness testing with the UCI method Part 1: Test method Abbreviations used: AD HP ASME DIN Working group of pressure vessels; Production and testing American Society of Mechanical Engineers German Institute for Standardization Period of validity: 11.03.2014 to 10.03.2019 Translation 7/7