.68 click RED DOT to go to page COLORADO (800) 95-06 WASHINGTON (800) 96-6006
.69 2 52625 MTM MAIN CHUTE 96+ 7/8" HOLES 2 GAUGE (WHITE) 52625L MTM MAIN LINER 5560 MTM MAIN CHUTE 95 OLDER /" HOLES (WHITE) 2 5260 MTM FOLD OVER CHUTE 7/8" HOLES (WHITE) 5600 MTM FOLD OVER CHUTE 6" /" HOLES (WHITE) 550 MTM FOLD OVER CHUTE /" HOLES (WHITE) 8220 MTM FOLD OVER CHUTE PAVER (WHITE) SG Orange MTM STREET GUARD* *Click here for Street Guard details - Available in Safety Orange, Red, Blue, Green & Black Main Chutes & Fold Over Chutes (page 2) Extension Chutes, Slurry Chute, Collector Chutes & Bibs Hoppers & Liners
.70 5 2 6 8 7 528 FOLD OVER HOOK WITH CHAIN 2 05050 FOLD OVER CHUTE HARNESS SNAP 0505S COLD SHUNT /" 8282 MAIN CHUTE TO PIVOT STUD 7/8" 005 LOCK NUT 5 20058 FOLD OVER BOLT 6 00567 WASHER 7 252 DECAL - KEEP HANDS AWAY FROM PIVOT POINTS 8 272 DECAL - OPERATOR WARNING Extension Chutes, Slurry Chute Collector Chutes & Bibs, Hoppers & Liners
.7 2 5650 STANDARD EXTENSION CHUTE PAINTED WHITE GAUGE AR6 5650-LW LIGHTWEIGHT EXTENSION CHUTE 9LBS 6 GAUGE POWDER COATED WHITE 2 5650-AL ALUMINUM EXTENSION CHUTE PAINTED WHITE 5650-APL ALUMINUM EXTENSION CHUTE WITH PLASTIC LINER 569 MTM STANDARD EXTENSION CHUTE WITH TABS FOR HORIZONTAL SIDE 569-LW MTM LIGHTWEIGHT EXTENSION CHUTE WITH TABS FOR HORIZONTAL SIDE 566 MTM - EXTENSION, TRANSITION CHUTE PAVER 5 6 7 8 9 82629 CHUTE HOLD DOWN ASSEMBLY 5 82650 CHUTE HOLD DOWN CLIP - PLASTIC 6 82650K CHUTE HOLD DOWN CLIP - PLASTIC, FOR LIGHTWEIGHT CHUTES 7 600-86000 L-BRACKET FOR -EXTENSION CHUTES 8 252 DECAL - KEEP HANDS AWAY FROM PIVOT POINTS 9 272 DECAL - OPERATOR WARNING Slurry Chute, Collector Chutes & Bibs, Hoppers & Liners
.72 Slurry Chute SLURRYCHUTE STANDARD TAPERED CONE CHUTE SLURRYCHUTE STANDARD TAPERED CONE CHUTE WITH BOOT Collector Chutes & Bibs, Hoppers & Liners
.7 555 MTM COLLECTOR BMV 60.5" 50 MTM COLLECTOR BM III & BMV STANDARD 56.5" 5 6 526 COLLECTOR BOOT HOLE (RUBBER) 526U COLLECTOR BOOT HOLE (URETHANE) 000 PLASTIC LOCK NUT /8" FOR MTM COLLECTOR BOOT 5 200700 BIB WASHER - FLAT, /8" 6 268 WIPER RING - STANDARD COLLECTOR (RUBBER) 2 PIECES REQUIRED Hoppers & Liners page Hoppers & Liners Page 2 Hoppers & Liners Page Hoppers & Liners Page
.7 2 570 MTM HOPPER, 9 & UP STANDARD MIXER AND BRIDGEMASTER, 5 2 570-ULIN URETHANE LINER / WELD IN WITH CAPS 50268 MTM HOPPER BODY LINER 50269 MTM HOPPER LIP LINER 550 MTM HOPPER " STANDARD 2002 AND UP BMV 550-ULIN URETHANE LINER WELD IN WITH COVER CAPS 08582 MTM - HOPPER BODY LINER 50226 MTM - HOPPER LIP LINER SEE PAGE.77 FOR LIGHTS, AIR CYLINDERS AND HOPPER ACCESSORIES Hoppers & Liners Page 2 Hoppers & Liners Page Hoppers & Liners Page
.75 2 5605 MTM HOPPER 95 6' PAVER 2 5505ULIN HOPPER LINER URETHANE 82260 MTM LOAD-HOPPER-BM III-HIGH 82260ULIN HOPPER LINER URETHANE SEE PAGE.77 FOR LIGHTS, AIR CYLINDERS AND HOPPER ACCESSORIES Hoppers & Liners Page Hoppers & Liners Page
.76 2 550 HOPPER - PAVER 2 550ULIN HOPPER LINER URETHANE 0598 HOPPER - PAVER DP MT 6' 0595ULIN HOPPER LINER URETHANE SEE PAGE.77 FOR LIGHTS, AIR CYLINDERS AND HOPPER ACCESSORIES Hoppers & Liners Page
.77 2 6 9 5 7 8 0 L2.5RR-LED LIGHT 2.5" / ROUND / RED / LED L2.5RR LIGHT 2.5" / ROUND / RED 2 L2.5G 2.5" LIGHT GROMMET 5578 MTM HOPPER LIGHT BAR 09 HARNESS - HOPPER LIGHT BAR 5 0766 MTM HOPPER AIR CYLINDER 6 0766C MTM HOPPER CYLINDER CLEVIS 7 0766P MTM HOPPER CYLINDER CLEVIS PIN 8 29 MTM HOPPER CYLINDER FITTING 9 5525 MTM - ADD WATER PIPE ASSEMBLY BMV 0 50220 MTM - ADD WATER PIPE ASSEMBLY BMIII