Genesis 2 Measuring System

Similar documents
Vector Measuring System PARTS MANUAL

TRUSCAN MEASURING SYSTEM

Chief S21M PARTS MANUAL Chief Automotive Systems, Inc.

Chief EZLiner 25 Series

Portable Tower S21M USERS MANUAL

UMS Storage Rack ASSEMBLY INSTRUCTIONS Chief Automotive Systems, Inc.

Chief impulse - VHT PARTS MANUAL

CRAFTSMAN COMPOUND MITER SAW MODEL NUMBER REPAIR SHEET

Chief Universal Measuring System

CATALOG OF REPLACEMENT PARTS

Impulse evht PARTS MANUAL AUTOMOTIVE SYSTEMS Chief Automotive Systems, Inc. A DOVER INDUSTRIES COMPANY

8 LIFT ASSEMBLY 8.1 LIFT ASSEMBLY PARTS LIST

GOLIATH PARTS MANUAL. May 2016 by Vehicle Service Group. All rights reserved.

CATALOG OF REPLACEMENT PARTS

ELECTRIC TOOL PARTS LIST

CATALOG OF REPLACEMENT PARTS

365L (2001) Page 1 of 36 54" Deck Assembly

PARTS LIST CHARGER 2716 DB PLUS

S21M Auxiliary Tower System

215E. Operator and Parts Manual MM158

INSTALLATION and OPERATION MANUAL

Spare Parts B WR

Model 4070 Center Post Tire Changer

MULTI-ZONE FOAMED MACHINE MODEL PARTS MANUAL

Reproduction. Not for HYDRO DRIVE 46" 22 HP ZTR 360Z SERIES. Parts Manual for ZT2246

Repair Parts Parts List for RIDGID 10 Compound Miter Saw Model No. MS1065LZ RIDGID parts are available on-line at

PARTS LIST CHARGER 2022 AB

CHAPTER 4 PARTS AND DIAGRAMS

Reproduction. Not for HYDRO DRIVE 46" 22 HP ZTR 360Z SERIES. Parts Manual for ZT2246

Champion Series Zero-Turn Riders & Mower Decks

M9/D (-020 thru -022) M11/D (-020 thru -022)

EXPLODED VIEWS & PARTS LISTS

Hydrostatic Zero-Turn Commercial Riding Mower

4050A. Tire Changer. Parts Identification. For servicing single piece automotive and most light truck tire/wheel assemblies

PARTS LIST WRANGLER 2625 DB

TILT COMMODE September 16, 2011

28-216, & A 14 WOOD CUTTING BAND SAW BS-2G-1C PART NO Date: 06/19/02

MLG31PCBWS : 01 - COIN CONTROL AND LINT DOOR ASSY [1/19] Page 1 of 38

Audi Clamping Adapters

Please read the operator manual carefully and make sure you understand the instructions before using the machine.

Wheel Balancer Models D, D, D & D

Main Drive Components

ELECTRIC TOOL PARTS LIST

LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES F

Worldlawn Power Equipment, Inc. Industrial Park 2415 Ashland Ave. Beatrice, NE Toll Free Number:

ELECTRIC TOOL PARTS LIST

CATALOG OF REPLACEMENT PARTS

Main Components Early Style

Parts Catalog Issued: Feb 5, Invacare I-Lift. Patient Transport Lift

PARTS LIST WRANGLER 2625 DB

PARTS LIST CHAMP 2929

Parts Catalog. S-Series Slicer Standard Automatic S13A. Model:

Parts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES F MODELS LT145H33FBV LT145H38FBV ELT145H33FBV

Parts Catalog. S-Series Slicer Standard Automatic Frozen Option S13A. Model:

Parts Catalog. S-Series Slicer Automatic. Model:

CPO130 Wall Oven. DACOR CARES PROGRAM NLA Part Locator Service

MDG78 Complete Dryer Assembly Piece Back Guard Assembly (gas and electric) Top Back Guard (gas and electric) Bottom Bac

M MARCH 2002 Parts Manual Contains:

PARTS LIST CHARGER 2022 ABLT

Worldlawn Power Equipment, Inc. Industrial Park 2415 Ashland Ave. Beatrice, NE Toll Free Number:

Part s Catalog. GT2100 Garden Tractor. Model No. 14AP80RP744. Original Instructions (EN) (01/31/06)

Parts Manual Rev. B RZT48 /

28-216, & A 14 WOOD CUTTING BAND SAW BS-2G-1C PART NO Date:

We recommend that when you need spare parts, you should use only original parts.

Parts Catalog. S-Series Slicer Standard Automatic S13A. Model:

CATALOG OF REPLACEMENT PARTS SLICERS (INCLUDES MOTOR PARTS) A product of HOBART CORPORATION 701 S. RIDGE AVENUE TROY, OHIO

LIST NO. F088 ENGINE. GRASS TRIMMER / BRUSH CUTTER Model TCG 23ECP (TANAKA BRAND) (E1) A 57

Illustrated Parts Manual

Hydrostatic Zero-Turn Commercial Riding Mower

Model Year: 2008 Model: xb Doc ID: RM000001XUW004X

LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES "G"

CONTAINER GUIDE WELDMENTS

HP Electric PTO Horse Tiller Page 1 of 23 Bolo Tine Assemblies

CB300-SATL (SATELLITE) CB300-SA (STAND ALONE)

PARTS ORDERING INFORMATION

for Reproduction Not Brighter. Warmer. Safer. Portable Industrial Heaters Portable Light Towers Portable Light Stands Solar Flashing Arrow Boards

ALUMINUM & STEEL CAR CARRIERS

MOTOR PARTS DIAGRAM. Wires to Motor. Cord

DFBB363 G SERIES : DRAWER [1/9]

PARTS LIST WRANGLER 26-VS

H.I.T Truck Tire Changer. Parts Identification

Parts Catalog. S-Series Slicer Standard Automatic Frozen Option S13A. Model:

PARTS MANUAL. RGD5000 Generator. Model. PUB-GP1204 Rev. 7/98

PARTS LIST CHARGER 2716 DB PLUS

PARTS MANUAL. PS314SBI Gas and Electric Ovens. Models: for domestic and standard export ovens PS314SBI Middleby Marshall, Inc.

PARTS LIST CHARGER 2717 AB

Part s Catalog. LX500 Lawn Tractor. Model No. 13AP60RP744. Original Instructions (EN) (01/31/06)

HMD v Power Feed with Coolant HMD v Type I plug, Power Feed with Coolant

PARTS MANUAL. SERIAL NO: to BAND SAWING MACHINE

Instructions for Parts Books

We put the work in work trucks. Termite Control. Manufactured for Terminix

5035 A/E. Rim Clamp Tire Changer. Parts Identification

DFBB363 : DRAWER [1/12]

105SL. Spare Parts List High Performance Printers. Refer to parts list on next page.

21" STEEL DECK WALK BEHIND MOWER "MR" SERIES 17

LEGACY. INSTALLATION and OPERATION MANUAL 1812A. READ and SAVE THIS INSTRUCTION MANUAL 10,000 LB. (ASYMMETRICAL)

PARTS LIST CHARGER 2717 DB

PITNEY BOWES FLEXIBLE INK JET TRANSPORT 56 FIT BASE: FIT-56. Parts Manual. (BOM: FIT-56revA) FIT-56parts_rev0 1

Parts Manual PZ Please read the operator manual carefully and make sure you understand the instructions before using the machine.

Illustrated Parts and Packing List & Instructions 815 Rice Lake Street, Owatonna, MN 55060

Transcription:

Genesis Measuring System R 999 Chief Automotive Systems, Inc.

GENESIS PARTS INFORMATION If it becomes necssary to order replacement parts or accessories for your Genesis Measuring System, or contact a service representative, call the Chief Automotive Systems, Inc. 4-hour toll-free telephone number (800-44-96). If located outside the United States, contact an authorized Chief Automotive Systems, Inc. representative. When contacting Chief Automotive Systems, Inc. by telephone or mail, provide the following information: name, name of shop, shop telephone number, shop address, a description of the part and the part number, if available. In addition, note the method of payment and shipping charges. GENESIS BASIC ASSEMBLY PARTS (See Illustrations - Page ) Ref. Part No. * Magnetic Hole Attachment 6687 Spacer Assembly * Magnetic Bolt Attachment 4 * Clip, Bottom Hole, -0mm ** Monitor 6 ** Keyboard, Enhanced 7 ** Printer *** 79740 Kit, Fresnell Lens Cleaning 8 798486 Cabinet, Complete, Genesis 9 79800 Body Scanner 0 7980 Owners/Software Manual, Genesis (W-) * Target Assembly, Nos. -40 * Target Assembly, Nos. 4-4 * Target Assembly, Nos. 4-4 4 79897 Attachment, Magnetic * Hole Attachment (Yellow/Green/Blue), optional 6 * Hole Attachment, (Snap-In) 7 * Extruded Hole Attachment (Orange/White), optional 8 * Bolt Attachment (Metal), optional 9 * Bolt Attachment (Nylon) 0 799060 Base Assembly, Target 799 Bar Assembly, Upper Body * Threaded Bolt Attachment 79940 Tray, Body Scanner 4 7998 Board Assembly, Wall Storage, x 96 * Computer 6 6060 Bolt, /8-NC x Lg. Gr. 8 Pl. 7 * Cap, Bolt Hole 8 * Side Hole Clip 9 * Side Hole Clip, Extended *** 7984 Genesis Basic Training Manual * See individual sizes and respective part numbers on following pages. ** Contact Chief Automotive Systems, Inc. for current model(s) available. Note brand name and model number of existing equipment when making inquiry. *** Not shown in parts section.

GENESIS GENESIS BASIC ASSEMBLY PARTS (Illustrations) 6 8 8* 4 * 7 9 8* 9* 4 7* 9 0 6 0 4 6 7

GENESIS Workstation (See Part Numbers, s - Next Page) 6 6 6 9 8 9 7 8 7 0 4 4 0 4 7

GENESIS Workstation (continued) Ref. Part No. Ref. Part No. 798489 Cabinet, Workstation (ass y) 7004 Fuse Holder * 79084 Insert, Drawer #, Targets 7909 Label, Caution, Class II Laser Product * 7989 Insert, Drawer #, Attachments 7977 Decal, Chief Automotive Syst. 4 7980 Decal, Genesis, Cabinet, Small * 7984 Pad, CPU 7986 Decal, Pinstripe, /4, Red 6 79447 AC Connector, Male 7 79449 Power Strip/Surge Protector 8 79444 Bulkhead Connector 9 7988 Decal, Genesis, Cabinet, Large 0 794470 Fan, Cooling, V 79480 Cover, Lexan, Power Supply 794 Line Filter, AC * 7976 Pad, Nonskid, Printer Stand 7984 Tie Down Clamp, Monitor 4 797400 Side Handle, Workstation 79860 Plug, Workstation, Side Handle 6 79878 Plug, Slot, Workstation 7 7977 Filter Assembly, Fan 8 79907 Filter Replacement, Fan * 79798 Pad, Storage Drawer 9 79747 Cable Bracket, Workstation 0 7974 Caster, Rigid, Workstation 79744 Caster, Swivel, Workstation 797 Filter, Workstation 797 Lock, Keyed, Drawer 4 79947 Power Supply Assembly * 799449 Power Supply Cord 798488 Rear Panel 6 79940 Cable Assembly/Panel Mount 7 70044 Angled Fuse Holder * Not Shown Computer Keyboard Monitor Printer Ref. Part No. ** Computer * ** Cord, Supply, CPU Power* ** Monitor, Color * 799 Cover, Nylon, Monitor * ** Cover, Metal, Monitor (optional) ** Keyboard, Enhanced * ** Cable, Keyboard * 79476 Cover, Dust, Keyboard 4 ** Printer * ** Cord, Power, Printer * ** Ribbon, Printer * Not Shown ** Contact Chief Automotive Systems, Inc. for current model(s) available. Note brand name and model number of existing equipment when making inquiry. 4 4

GENESIS Body Scanner 8 9 6 9 4 8 0 7 7 4 6 6 0 4 0 Ref. Part No. Ref. Part No. 79800 Body Scanner 706804 Nut, Hex, 6-7909 Decal, Caution, Class II Laser Product, Decal is located on each Body Scanner Handle 7900 Decal, Avoid Exposure, Identical Decals located on Opposite Side Of Body Scanner 4 7907 Grip, Center Handle 7908 Retainer, Grip, Center Handle 6 790604 Handle, End 7 7906 End Handle, w/holes, Coated 8 79066 Gasket, Upper End Handle 9 790680 Gasket, Center Handle 0 7907 Gasket, Lower, End Handle 7908 Bolt, Shoulder, 6-790840 Foot, Body Scanner Housing 769 Washer, Nylon 4 7980 Decal, Genesis, Body Scanner 7986 Decal, Pinstripe, /4, Red 6 79888 Plug, End Handle 7 7944 Switch, Power Toggle 8 79444 Bulkhead Connector * 790 Cover, Nylon, Body Scanner 9 796096 Screw, 4-40 x / Lg., Black, HSHCS 0 7964 Screw, 6- x / Lg. 79668 Screw, 6- x /4 Lg., HSHCS * 79664 Nut, 6-, Hex, Pl. * 79974 Cable Assembly, Body Scanner 79644 Screw, # x / Bl. 7997 Gasket, Lower, End Handle, Solid 4 604 Screw, 8- x /, SBHCS, BL 7977 Decal, Chief Automotive Systems, Inc. * 7909 Decal, Turn Scanner Off * Not Shown

GENESIS Ref. Part No. 79940 Tray, Body Scanner 79 Tray, Body Scanner 790 Foot, Body Scanner Tray 7964 Trim, /6 wide, raw, R00 B x /6 4 7964 Screw, 6- x / Lg., HSBHCS, Blk. Tray 4 4 Storage Board Ref. Part No. 7998 Board Assembly, Wall Storage 69407 Hanger, Long 6468 Nut, Propeller Tee, /4-0, Pl. 79007 Silk Screen Board 798 Decal, Genesis Accessories 6

GENESIS Upper Body Bar 6 6 0,, 7 0, 4,4 4 7 7 7 8 6 6 0 8 7 9 0 Ref. Part No. 799 Upper Body Bar Assembly 60947 Pointer, 0mm 609 Pointer, 78mm 6096 Reverse Cone, 0mm 4 6097 Reverse Cone, 78mm 68 Thumb Screw, Padded, /4-0 x / 6 790679 Pop Rivet, /8, Multi-Grip, AD-44-BS 7 790866 Stud, Target Holder, Upper Body Bar * 799 Decal, #4, Target Back * 7990 Decal, #44, Target Back 8 798 Housing, Outer, Scale Assembly 9 7974 Mount, Center Target, Upper Body Bar * Not Shown Ref. Part No. 0 7978 Pin, Upper Body Bar 796096 Screw, 4-40 x / Lg., Blk. 798948 Target Assembly, 00mm, No. 4, Left 79896 Target Assembly, 00mm, No. 44, Right 4 798964 Target Assembly, 00mm, No. 4, Center 799 Holder Assembly, Target, U.B.B. Hard Coated 6 79960 Pointer Holder Assembly, Hard Coated 7 7996 Bar Tape Assembly, Vertical Bar * 797787 Extended Bar Tape Assembly, Vertical Bar NOTE: Items,,, 4,,,, and 4 are not included in 799. Shown for clarity. 7

GENESIS Target Assemblies - Nos. - 40 Ref. Part No. 7986 Target Ass y, 0mm-0mm, # (compl.) 79040 Pendant, 0mm 798008 Sub Assembly, Target 7984 Target Ass y, 0mm-0mm, # (compl.) 79040 Pendant, 0mm 79806 Sub Assembly, Target 7984 Target Ass y, 40mm-70mm, # (compl.) (optional) 79040 Pendant, 40mm 79804 Sub Assembly, Target 7980 Target Ass y, 40mm-70mm, #4 (compl.) (optional) 79040 Pendant, 40mm 7980 Sub Assembly, Target 79869 Target Ass y, 40mm-70mm, # (compl.) (optional) 79040 Pendant, 40mm 798040 Sub Assembly, Target 79877 Target Ass y, 40mm-70mm, #6 (compl.) (optional) 79040 Pendant, 40mm 79809 Sub Assembly, Target 7988 Target Ass y, 40mm-70mm, #7 (compl.) 79040 Pendant, 40mm 798067 Sub Assembly, Target 7989 Target Ass y, 40mm-70mm, #8 (compl.) 79040 Pendant, 40mm 79807 Sub Assembly, Target 798606 Target Ass y, 60mm-90mm, #9 (compl.) 79048 Pendant, 60mm 79808 Sub Assembly, Target 79864 Target Ass y, 60mm-90mm, #0 (compl.) 79048 Pendant, 60mm 79809 Sub Assembly, Target 7986 Target Ass y, 60mm-90mm, # (compl.) 79048 Pendant, 60mm 79804 Sub Assembly, Target 8 Ref. Part No. 79860 Target Ass y, 60mm-90mm, # (compl.) 79048 Pendant, 60mm 798 Sub Assembly, Target 798649 Target Ass y, 00mm-0mm, # 79046 Pendant, 00mm 7980 Sub Assembly, Target 79867 Target Ass y, 00mm-0mm, #4 79046 Pendant, 00mm 7989 Sub Assembly, Target

GENESIS Target Assemblies (Nos. - 40) continued... Ref. Part No. 79866 Target Ass y, 00mm-0mm, # 79046 Pendant, 00mm 79847 Sub Assembly, Target 79867 Target Ass y, 00mm-0mm, #6 79046 Pendant, 00mm 798 Sub Assembly, Target 79868 Target Ass y, 40mm-70mm, #7 790444 Pendant, 40mm 7986 Sub Assembly, Target 798690 Target Ass y, 40mm-70mm, #8 790444 Pendant, 40mm 7987 Sub Assembly, Target 79870 Target Ass y, 40mm-70mm, #9 790444 Pendant, 40mm 79880 Sub Assembly, Target 79870 Target Ass y, 40mm-70mm, #0 790444 Pendant, 40mm 79898 Sub Assembly, Target 79879 Target Ass y, 80mm-0mm, # 7904 Pendant, 80mm 79800 Sub Assembly, Target 79877 Target Ass y, 80mm-0mm, # 7904 Pendant, 80mm 7989 Sub Assembly, Target 79874 Target Ass y, 0mm-0mm, # 790460 Pendant, 0mm 7987 Sub Assembly, Target Ref. Part No. 7987 Target Ass y, 0mm-0mm, #4 790460 Pendant, 0mm 798 Sub Assembly, Target 79876 Target Ass y, 60mm-90mm, # 790479 Pendant, 60mm 7984 Sub Assembly, Target 798770 Target Ass y, 60mm-90mm, #6 790479 Pendant, 60mm 798 Sub Assembly, Target 798788 Target Ass y, 00mm-40mm, #7 790487 Pendant, 00mm 79860 Sub Assembly, Target 798796 Target Ass y, 00mm-40mm, #8 790487 Pendant, 00mm 79878 Sub Assembly, Target 798809 Target Ass y, 40mm-470mm, #9 79049 Pendant, 40mm 79886 Sub Assembly, Target 79887 Target Ass y, 40mm-470mm, #0 79049 Pendant, 40mm 79894 Sub Assembly, Target 7988 Target Ass y, 40mm-470mm, # 79049 Pendant, 40mm 79807 Sub Assembly, Target 7988 Target Ass y, 40mm-470mm, # 79049 Pendant, 40mm 798 Sub Assembly, Target 9

GENESIS Target Assemblies (Nos. - 40) continued... Target Assemblies (Nos. 4-4)... Ref. PartNo. 79884 Target Ass y, 80mm-0mm, # 7906 Pendant, 80mm 798 Sub Assembly, Target 79880 Target Ass y, 80mm-0mm, #4 7906 Pendant, 80mm 798 Sub Assembly, Target 798868 Target Ass y, 80mm-0mm, # 7906 Pendant, 80mm 79840 Sub Assembly, Target 798876 Target Ass y, 80mm-0mm, #6 7906 Pendant, 80mm 7988 Sub Assembly, Target 798884 Target Ass y, 40mm-0mm, #7 7907 Pendant, 40mm 79866 Sub Assembly, Target 79889 Target Ass y, 40mm-0mm, #8 7907 Pendant, 40mm 79874 Sub Assembly, Target 79890 Target Ass y, 480mm-0mm, #9, 7908 Pendant, 480mm 7988 Sub Assembly, Target 7989 Target Ass y, 480mm-0mm, #40 7908 Pendant, 480mm 79890 Sub Assembly, Target (Nos. 4-4) (Nos. 4-4) Ref. Part No. 7989 Target Ass y, 0mm-9mm, #4 (compl.) 79040 Pendant, 0mm 79840 Sub Assembly, Target 79890 Target Ass y, 0mm-9mm, #4 (compl.) 79040 Pendant, 0mm 7984 Sub Assembly, Target 798948 Target Ass y, 00mm, #4, Left (compl.) 796096 Screw, 4-40 x / HSHCS, Bl. 79840 Sub Assembly, Target 79896 Target Ass y, 00mm, #44, Right (compl.) 796096 Screw, 4-40 x / HSHCS, Bl. 79848 Sub Assembly, Target 798964 Target Ass y, 00mm, #4, Center (compl.) 796096 Screw, 4-40 x / HSHCS, Bl. 798446 Sub Assembly, Target 0

GENESIS Magnetic Hole Attachment Magnetic Bolt Attachment Threaded Bolt Attachment Target Base Ref.PartNo. 6 4 8 Magnetic Hole Attachment 674 Hole Attachment, Magnetic Magnetic Bolt Attachment 78000 Bolt Attachment, Magnetic, 0mm 7800 Bolt Attachment, Magnetic, mm 7800 Bolt Attachment, Magnetic, 4mm 7800 Bolt Attachment, Magnetic, mm 78004 Bolt Attachment, Magnetic, 6mm 7800 Bolt Attachment, Magnetic, 7mm 78006 Bolt Attachment, Magnetic, 8mm 78007 Bolt Attachment, Magnetic, 9mm 78008 Bolt Attachment, Magnetic, mm 78009 Bolt Attachment, Magnetic, 4mm 7 Threaded Bolt Attachment 780 Bolt Attachment, Threaded, mm 780 Bolt Attachment, Threaded, 4mm 7804 Bolt Attachment, Threaded, mm 780 Bolt Attachment, Threaded, 8mm 7806 Bolt Attachment, Threaded, mm 7807 Bolt Attachment, Threaded, 4mm 799060 Target Base 68 Thumb Screw, Padded, /4-0NC x / 67 Screw, 6- x /, SHCS 66 Base 4 79009 Point, mm 7907 Extension, Inner, 6mm x 0mm 6 790 Extension, Outer, mm x 0mm 7 790 Cylinder, Outer, mm x 4mm 8 796 Set Screw, Hex Socket, 8-NC x.7 Lb.

GENESIS Bottom Hole Clip Ref. Part No. Bottom Hole Clip 797 Clip, Bottom Hole, -0mm Bolt Hole Cap Aluminum Snap-In 4 Nylon Bolt Clip Magnetic Attachment Bolt Hole Cap 780060 Cap, Bolt Hole, mm 78006 Cap, Bolt Hole, 7mm 78006 Cap, Bolt Hole, 9mm 78006 Cap, Bolt Hole, mm 780064 Cap, Bolt Hole, mm 78006 Cap, Bolt Hole, mm 780066 Cap, Bolt Hole, 7mm Aluminum Snap-In Attachment 78000 Attachment, Snap-In, 0mm 7800 Attachment, Snap-In, mm 7800 Attachment, Snap-In, mm 7800 Attachment, Snap-In, mm 78004 Attachment, Snap-In, 4mm 7800 Attachment, Snap-In, mm 78006 Attachment, Snap-In, 6mm 78007 Attachment, Snap-In, 7mm 78008 Attachment, Snap-In, 8mm 78009 Attachment, Snap-In, 9mm 780040 Attachment, Snap-In, 0mm 78004 Attachment, Snap-In, mm 780044 Attachment, Snap-In, 4mm 78004 Attachment, Snap-In, mm 780046 Attachment, Snap-In, 6mm 780048 Attachment, Snap-In, 8mm 78000 Attachment, Snap-In, 0mm 7800 Attachment, Snap-In, mm 780000 Spring, Hole Plug 78000 Shoulder Screw,.8 x. Long 78006 Set Screw, -6 x /8 Long 4 79077 Ball Socket, Target Nylon Bolt Clip 78007 Bolt Clip, Nylon, 0-0mm 78008 Bolt Clip, Nylon, -mm 78009 Bolt Clip, Nylon, -mm 79077 Ball Socket, Target 78000 Shoulder Screw,.8 x. Long 78008 Cap Screw, -6 x /6 Lg., Button Hd. 79897 Magnetic Attachment 6900 Magnet 7900 Holder, Magnetic Attachment 7900 Guide, Magnetic Attachment 4 790678 Pop Rivet, /4, Multi-Grip, AD-88 4

GENESIS Hole Attachment - Metal (Optional) Part No. Hole Attachment (Optional) Extruded Hole Attachment - Metal (Optional) 798980 Attachment, Hole, 9 - mm 798999 Attachment, Hole, 0-4mm 799000 Attachment, Hole, 40 60mm Extruded Hole Attachment (Optional) 79909 Attachment, Extruded Hole, 9 - mm 79907 Attachment, Extruded Hole, 0-4mm Bolt Attachment (Optional) 7990 Attachment, Bolt, 0-0mm 79904 Attachment, Bolt, - mm 7990 Attachment, Bolt, - mm Bolt Attachment - Metal (Optional) Side Hole Clip, (Optional) 79088 Clip, Side Hole, mm 79096 Clip, Side Hole, mm Side Hole Clip, Extended (Optional) 7900 Clip, Side Hole, Extended, x 0mm 7907 Clip, Side Hole, Extended, x 0mm Side Hole Clip - Metal (Optional) Extended Side Hole Clip - Metal (Optional)

P.O. Box 68 Grand Island, Nebraska 6880-68 PH 08-84-9747 FAX 08-84-8966 Chief reserves the right to alter product specifications and/or package components without notice. G PM (4/07) Part No. 79996