Temperature Humidity Light Voltage Current Class 100 temperature and humidity dataloggers Storage capacity : 12,000 measurement points With or without 1-line display Temperature - KT 100 1 internal sensor - with or without input for external probe External probes temperature, current, voltage Measuring ranges -40 C to +70 C and -40 C to +120 C (external) Resolution 0.1 C IP 40 or IP 67 housing protection Temperature / Humidity / Light - KH 100 3 internal sensors Parameters humidity, temperature and light Measuring ranges from 5 to 95%RH, from -20 C to +70 C, from 0 to 10000 lux Resolution 0.1%RH, 0.1 C and 1 lux IP 40 housing protection Class 200 temperature and humidity dataloggers Storage capacity : 16,000 measurement points With or without 2-line display KILOG CFR software in accordance with 21 CFR part 11 standards Data collector (storage capacity of 500,000 values). Temperature - KT 200 1 internal sensor - 4 inputs for external probes External probes temperature, current, voltage Measuring ranges from -40 C to +70 C and from -40 C to +120 C (external) Resolution 0.1 C IP 40 or IP 67 housing protection 2 Temperature / Humidity / Light - KH 200 3 internal sensors - 2 inputs for external probes External probes temperature, current, voltage Measuring ranges from 5 to 95%RH, -20 C to +70 C or -20 C to +80 C, -40 C to 120 C (external) and 0 to 10000 lux Resolution 0.1%RH, 0.1 C and 1 lux IP 40 or IP 67 housing protection Portable printer for data collector PT100 and thermocouple temperature probes Ammeter clamps from 0-20 A to 0-600 A
Class 300 temperature and humidity dataloggers Storage capacity : 100,000 measurement points With 2-line display Ideal for food produce, archive material or any goods sensitive to environmental conditions...4 specific ranges to meet all your applications. KISTOCK data processing software Thermocouple temperature - KTT 300 Thermocouple K, J, or T remote probe 2 inputs for external probes Measuring ranges from -200 C to +400 C T -100 C to +750 C J -200 C to +1000 C K Resolution 0.1 C IP 43 housing protection 1- Easy configuration. 2- Fast data download : 1,000 values/second via USB 2.0 cable. 3- Data processing or data acquisition in real time. Probes and accessories PT100 Temperature - KTR 300 PT100 remote probe 2 inputs for external probes External probes temperature, current, voltage Measuring range from -100 to +400 C Resolution 0.1 C IP 67 housing protection Suitable for prevention of Legionella risks in water systems Wall-mounting bracket with antitheft system and magnetic fixing 0-10 V voltage and 0/4-20 ma current input cables PT100 Temperature / Humidity - KTH 300 Ambient and remote probe PT100 and capacitive With 2 or without internal sensors 1 or 2 inputs for external probes Dew point temperature External probes temperature, current, voltage Measuring ranges 0 to 100%RH, -20 C to +70 C or -20 C to +120 C or -40 C to +180 C, and -100 to +400 C (external) Resolution 0.1%RH, 0.1 C IP 54/ IP 67 housing protection Hygrometry probes -40 to +180 C 3
Common features Configuration via keypad, remote control and software Advanced calculation functions Simultaneous display of 2 parameters 2 Configurable relays with visual alarm 18-30 Vdc or 24 Vac/Vdc power supply Pressure - CP 200 2 4-20 ma or 0-10 V analogue outputs 1 RS 232 output From 0/+100 Pa to -2000/+2000 mbar. With or without display Manual auto-zero. ABS housing Barbed or compression fittings. Functions : pressure, air velocity, airflow, integration of pressure measurement, measurement correction factor, temperature compensation. Class 200 for HVAC and process Airflow - Air Velocity - SQR 2 option Connected to DEBIMO measuring blades, and with SQR 2 function, CP200 can control air velocity and airflow in a duct, from the differential pressure. Air Velocity - CTV 200 From 0-1 m/s to 0-20 m/s and from 0 to +50 C. Stainless steel remote probe (150 or 300 mm long.) Functions : air velocity, airflow, measurement correction factor. Temperature / Humidity - TH 200 From 0 to 100%RH and from -40 to +180 C. Polycarbonate or stainless steel probe, standard or remote (lengths available 100 mm, 150 mm or 300 mm) with 2m cable. PTFE or stainless steel sintered tip, protective plastic head, stainless steel perforated head. Functions : relative and absolute humidity, wet and dry temperature, dew point, enthalpy. Remote probe 5
Pressure Temperature Humidity Velocity Airflow Monostats for HVAC Manostats - PST From -500/+1000 Pa to -1000/+2000 mbar. Common features Configuration via DIP switch and software 18-30 Vdc or 24 Vac/Vdc power supply SPDT relay (Single Pole Double Throw) With display ABS housing Thermostats - TST From 0 to +50 C (ambient) From -20 to +80 C (airtight) Depends on Pt100 probe (on terminal block) Airtight model Ambient model Hygrostats - HST From 0 to 100%RH, from 0 to +50 C (ambient) or from -20 to +80 C (duct mount or remote probe). Remote probe model Duct mount model Common features Configuration via DIP switch and software 18-30 Vdc or 24 Vac/Vdc power supply 4-20 ma or 0-10 V analogue outputs With or without display ABS housing Class 50 and Class 100 for HVAC Pressure From 0/+1000 Pa to -5000/+10 000 Pa and -1000/+2000 mbar. Temperature / Humidity From 0 to 100%RH From -20 to +80 C Probe type : standard, remote, duct mount or ambient Ambient model model Duct mount model Humidity Air Velocity From 0 to 30 m/s From 0 to +50 C Duct mount or remote probe (150 or 300 mm long.) Duct mount model From 0 to 100%RH Temperature From 0 to +50 C (ambient) From -20 to +80 C (duct mount or airtight probe) Depends on Pt100 probe (on terminal block) Air tight model Terminal block model 4
Pressure Temperature Humidity Velocity Airflow Common features Configuration via keypad, remote control and software Interchangeable probes Advanced calculation functions Display of 4 parameters simultaneously 2 or 4 configurable relays with visual alarm 24 Vac/Vdc or 230/115 Vac power supply 2 4-20 ma or 0-10 V analogue outputs 1 RS 232 output RS 232 connection and RS 485 Modbus network With or without digital display Stainless steel or ABS housing Class 300 for HVAC and process Pressure CP 300 ABS model Pressure CPA 300 From 0/+10 Pa to -10 000/+10 000 Pa Self-calibration li Barbed connections Functions : pressure, air velocity, airflow, integration of pressure measurement, measurement correction factor, automatic or manual temperature compensation (thermocouple K input). Airflow - Air Velocity - SQR 2 option Connected to DEBIMO measuring blades, and with SQR 2 function, CP200 can control air velocity and airflow in a duct, from the differential pressure. Temperature / Humidity TH 300 From 0-100%RH and -40 to +180 C Functions : relative and absolute humidity, wet and dry temperature, dew point, enthalpy. Polycarbonate or stainlees steel probe, standard or remote probe(lengths available 100 mm, 150 mm or 300 mm) with 2m cable. Stainless steel or PTFE sintered tip, protective plastic head, stainless steel perforated head. Temperature / Humidity THA 300 Standard probe model 6
Class 300 flush-mount Face calibration : innovative system which allows you to connect your transmitter (when installed) to a dynamic pressure calibration bench. Via RS232 connection, CPE300 can display alternatively (in addition to the pressure) other parameters such as temperature and humidity from a TH200 transmitter for example. Modbus network (RS 485 system) Flush-mount pressure sensor - CPE 300 Designed to measure and monitor cleanrooms, this model is perfect for flush-mounting in a wall or a panel. From -100/+100 Pa, -500/+500 Pa, -1000/+1000 Pa Front made of brushed stainless steel or white lacquered Outputs : 4-20 ma or 0-10V and RS 232 Configuration via software or infrared remote control Power supply : 24 Vac/Vdc Displays Regulators Multi-channel flush-mount display - ATE 300 Can display up to 3 parameters (example : humidity, temperature and pressure). Can be installed flush-mounted or wall-mounted. Common features RS 232 communication and RS 485 Modbus network 24 Vac/Vdc power supply Pre-programmed measurement units Large display - ATT 300 Via current or voltage input cable, ATT300 display can be connected to any type of transmitter : pressure, humidity, temperature, airflow, air velocity... Temperature probes Head holder and output on cable Pt 100, Pt 1000 Thermocouple K, J, T Head type : threaded, with metallic protection, DIN B, plastic, standards... Type of probe : contact, food, soft (to be glued), penetration, insulated sheath... Cables : PVC, Teflon, sheathed, glass silk... Mounting accessories : clamps, sliding connections, spikes... 7
Pressure Temperature Humidity Velocity Airflow Tachometer Tachometry Micromanometers Class 100/200 MP 5 measuring ranges available between 0 ±1000 Pa and 2 bar Manual zero and autozero, or self-calibration Air velocity and airflow with Pitot tube or Debimo blades 2 thermocouple K channels from -200 to +1300 C Up to 8,000 measurement points, output for printer and PC connection Anemometers Class 100/200 LV and VT Vane anemometer from 0.20 to 35 m/s, -20 to +80 C Hotwire anemometer from 0.00 to 30 m/s, -20 to +80 C Airflow function (in duct or with cones) 2 Pt100 channels from -100 to +400 C Up to 8,000 measurement points, output for printer and PC connection Hygrometers Class 100/200 HD Relative humidity from 5 to 95%RH and from 3 to 98%RH Ambient, wet and dry temperature from -20 to +80 C Absolute humidity, dew point, surface and ambient 2 Pt100 channels from -100 to +400 C Up to 8,000 measurement points, output for printer and PC connection Tachometer Class 100 CT Range from 60 to 50,000 RPM and 4 to 2500 m/min Optical or contact probe 8
Multifunctions Class 300 AMI and VT Common features Evolutionary, these instruments can measure several parameters simultaneously. Their SMART PRO probes are automatically identified by the instrument and are interchangeable. Class 300 AMI Micromanometer from 0 to ±1000 Pa or from 0 to ±1000 mmh 2 O Vane anemometer from 0.20 to 35 m/s, -20 to +80 C Hotwire anemometer 0.00 to 30 m/s, -20 to +80 C Hygrometer from 3 to 98%RH, -20 to +80 C 2-channel Pt100 thermometer from -100 to +400 C 2-channel thermocouple K from -200 to +1300 C Tachometer from 60 to 50,000 RPM and from 4 to 2500 m/min Air velocity and airflow with Pitot tube and with Debimo blades from 2 to 40 m/s or 4 to 100 m/s Up to 8,000 measurement points, output for printer and PC connection Class 300 VT Vane anemometer from 0.20 to 35 m/s, -20 to +80 C Hotwire anemometer from 0.00 to 30 m/s, -20 to +80 C Hygrometer from 3 to 98%RH, -20 to +80 C 2-channel Pt100 thermometer from -100 to +400 C 2-channel thermocouple K from -200 to +1300 C Tachometer from 60 to 50,000 RPM and from 4 to 2500 m/min Up to 8,000 measurement points, output for printer and PC connection Accessories for portable instruments SMART PRO PROBES Dedicaced to Class 200/300 portable instruments, these probes are interchangeable and are automatically recognized by the instruments. These probes come with adjustment certificate. Thermocouple K temperature probes Pitot tubes with or without temperature compensation Printer Data processing software Protective cover and protection hands-free holder Airflow cones Debimo blades... Vane probes ø 100, 70 and 16 mm Hotwire probes Telescopic hotwire probes Hygrometry probes Optical and contact tachometry probes Airflow cones Pt100 temperature probes 9
Temperature Velocity Airflow Thermometers Portables Class 100 Thermometers Thermocouple K (from -200 to +1300 C) or PT100 (from -100 to +400 C) 1 and 2 channels Supplied with or without probe Class 200 Thermometers From -200 to +1300 C 2 thermocouple K and 2 Pt100 channels Storage of values, interface for printer and PC connection From 85 to 4000 m 3 /h 6 sizes of hoods Supply and exhaust Flowmeter DBM 700 DBM 700 is the key tool for balancing : it allows you to check airflow on any type of grilles and on large air diffusers. Airflow cones for portable anemometers Installed on hotwire and vane anemometers, they measure airflow directly on vent grilles. From 10 to 1200 m 3 /h 4 sizes available : 200 x 200 mm, 300 x 300 mm, 450 x 450 mm, 550 x 100 mm Airflow cone for vane probe diam. 100 mm anemometer. Pitot tubes and DEBIMO measuring blades Debimo blades Lengths available from 100 to 3000 mm From 3 to 100 m/s From the dynamic pressure measured in a duct, Pitot tubes and DEBIMO allow you to calculate air velocity and airflow. Pitot tubes 20 sizes from 100 to 3000 mm NPL type, as per AFNOR standard 316 L stainless steel 10 With or without temperature compensation
Pressure Velocity Airflow Manometers liquid column Inclined manometers For very low differential pressure From 0-5 to 0-100 mmh 2 O Centre 0 scale Scale available in mmh 2 O, Pa, DaPa... Vertical manometers For high differential pressure with compact sizes. From 0-100 mmh 2 O to 0-2,6 bar Direct reading or reading by addition of columns Scale available in mmh 2 O, DaPa, mbar... Accessories for manometers A wide range of accessories is available to fit any installation with proper connections. Liquid for manometers Tube, junctions Pressure connections, wall-crossing connection Mano Pressostats ECM - Mano-Pressostats These models allow you to read a pressure measurement and to activate 1 or 2 electrical relays, with a great accuracy and repeatibility. From 0-10 to 300 mmh 2 O 230 Vac, 115 Vac and 24 Vac/Vdc power supply Manual configuration of setpoint Manostats Allow you to read a pressure measurement and to activate a relay when setpoint is passed. From -500 to +500 Pa and from -1000 to +1000 mbar. IP 65 protection 11
KIMO designs, manufactures and sells instruments for measuring and monitoring air parameters in HVAC and industry. With 27-year experience, KIMO offers a large range of products for your air / heating / refrigeration systems. Pressure Temperature Air velocity Humidity Airflow Tachometry With a new factory of 4,000 m 2 and high-tech production units, our team of 140 people has one goal : satisfy your needs. Our new laboratories of 600 m 2 are dedicated to calibration, adjusting and controls of our instruments; they are equipped with modern calibration benches regularly checked. Boulevard de Beaubourg BP 48 EMERAINVILLE - F-77312 MARNE LA VALLEE Tel + 33 (0)1 60 06 69 25 Fax + 33 (0)1 60 06 69 29 export@kimo.fr Distributed by : Calibrations are carried out as per ISO 9001 standard procedures, and certificates are issued accordingly (as per AFNOR standard). LICO Electronics GmbH Klederinger Str. 31 A-2320 Kledering - Austria Tel +43 1 706 43 000 email: office@lico.at Internet: www.lico.at www.mess-regeltechnik.at Non-contractual document - We reserve the right to modify the characteristics of our products without prior notice. CATALOGUE GENERAL EXPORT - V1 - Anglais - 04/06