USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features Fire Safe API 607 4TH Edition flanged valves have been qualified by testing to API standards 607, 4th Edition. The valve design incorporates a secondary metal seat in the body, providing the required shutoff should the primary seats be destroyed by fire. ASME B6.34 Design Full port, split body design meets all the requirements of ASME B6.34 for Class 50, 300, and 600 ball valves. Blow-Out Proof Stem The internal entry stem is machined with a heavy shoulder to prevent blowout. Anti-Static Configuration Anti-static devices are included at two points on the valve stem to provide continuous ball-to-stem and stem-to-body grounding, to prevent build-up of static charge in the valve. Live-Loaded Stem Seals Stem seals are live-loaded using Belleville washers to provide consistent sealing forces, reducing or eliminating the need for frequent seal adjustment. Fully Encapsulated Body Seals Provides consistent and controlled loading of the body seal compression through a full metal-to-metal contact joint design, eliminating seal extrusion and potential body joint leakage. Integral Mounting Pad Ideal for actuation, ISO 5 mounting dimensions simplify fit and alignment between valve, bracketry, and actuator. Permits easy field conversion from manual operation to actuation. Lockable Handle Sharpe ball valves are supplied with lever handles designed to permit locking the valve in either the open or closed position. Sizes through are supplied with a latch engaged at open and closed positions to prevent inadvertent operation. Larger sizes have a lockable pipe handle. Slotted Seat Design Relief slots are provided at the perimeter of the seats to equalize pressure in the body cavity with the upstream line when the valve is closed, preventing upstream seat extrusion and enhancing downstream seating performance. Choice of Seats and Seals A variety of seat materials are available for the most demanding applications, including RTFE, TFM, and Nova. Stem packing and body seals are die formed flexible graphite. Floating Ball Design Precision engineered and machined solid stainless steel ball with relief hole in the stem slot prevents build-up of cavity pressure while the valve is in the open position. Class 50 0 and and Class 300 6 through have supported balls. Material Traceability Body and end piece casting are marked with the heat codes providing traceability to the chemical analysis and material test reports performed at the foundry. CMTR s (Certified Material Test Reports) are available upon request. NACE Class 50 and Class 300 are NACE MR-075 Page of 7
Parts & Materials / - Class 50, 300, 600 No. Part Name Material Qty Body Carbon Steel ASTM A6 WCB 36 Stainless Steel ASTM A35 CF8M Thrust Bearing RTFE 3 Stem 36 Stainless Steel 3A Anti-Static Device (Located on Stem, Not Shown) Ball Spring Hard Drawn Stainless Steel 4 Stem Packing Graphite 5 Packing Gland 6 Belleville Washer 4 7 Gland Nut 8 Lock Tab 9 Wrench Block 0 Handle, Lever Galvanized Steel Stainless Steel Handle, Nut Seat RTFE 3 Ball 36 Stainless Steel 4 Body Seal Graphite 5 End Cap Carbon Steel ASTM A6 WCB 36 Stainless Steel ASTM A35 CF8M 6 Body Stud ASTM A93 Gr B8MA Mfg. Std. 7 Body Nut ASTM A94 Gr 8A Mfg. Std. 8 Stop Pin Class 50, Class 300 End Piece Class 600 End Piece Page of 7
Parts & Materials / - 4 Class 50, 300 3-4 Class 600 No. Part Name Material Qty Body Carbon Steel ASTM A6 WCB 36 Stainless Steel ASTM A35 CF8M Thrust Bearing RTFE 3 Stem 36 Stainless Steel 3A Anti-Static Device (Located on Stem, Not Shown) Ball Spring Hard Drawn Stainless Steel 4 Stem Packing Graphite 5 Plain Washer 6 Packing Gland 7 Stop Plate 8 Belleville Washer 4 9 Gland Nut 0 Lock Tab Wrench Block Handle, Pipe Galvanized Steel 3 Handle, Bolt 4 Seat RTFE 5 Ball 36 Stainless Steel 6 Body Seal Graphite 7 End Cap Carbon Steel ASTM A6 WCB 36 Stainless Steel ASTM A35 CF8M 8 Body Stud ASTM A93 Gr B8MA Mfg. Std. 9 Body Nut ASTM A94 Gr 8A Mfg. Std. 0 Stop Pin Page 3 of 7
Parts & Materials 6 - Class 50, 300 No. Part Name Material Qty Body Carbon Steel ASTM A6 WCB 36 Stainless Steel ASTM A35 CF8M End Cap Carbon Steel ASTM A6 WCB 36 Stainless Steel ASTM A35 CF8M 3 Stem 36 Stainless Steel 4A Gland Carbon Steel ASTM A6 WCB 36 Stainless Steel ASTM A35 CF8M 4B Sleeve Steel 5 Ball 36 Stainless Steel 6 Seat RTFE 7A Stem Packing RTFE 3-4 7B Stem Packing Graphite 8A Thrust Bearing RTFE 8B Thrust Bearing 50% PTFE/50% 36 Stainless Steel 9 Body Seal 36 SS / Graphite Sprial Wound 0 Stem Bearing RTFE Anti-Static Device (Located on Stem, Not Shown) Ball Spring Hard Drawn Stainless Steel Travel Stop Zinc Plated Steel 3 Snap Ring Nickel Plated Carbon Steel 4 Handle, Pipe Ductile Iron 4a Wrench Block Carbon Steel ASTM A6 WCB 5 Stud ASTM A93 Gr B7M Mfg. Std. ASTM A93 Gr B8A 6 Nut ASTM A94 Gr HM Mfg. Std. ASTM A94 Gr 8MA 7 Gland Bolt Steel 8* Ball Support Seat RTFE 9* Ball Support Packing Graphite 0* Ball Support Pin 36 Stainless Steel * Ball Support Nut * Set Nut 3* Tuning Screw *Ball Support for: Class 50 0"-" Class 300 6"-" Page 4 of 7
/ - Dimensions ½" - " ½" - 4" 6" - " / - 4-4 ½" - 4" 6" - " 6 6 - - ½" - 4" Stem Arrangement for Actuators Class 50 and Class 300 Dimensions (Inches) Class 50 300 50 300 50 300 50 300 Size Port A A B C C D D M M G H I** J K W GEAR OPERATOR GEAR /" 0.59 4.5 5.50 4.78 3.58 3.58.97.64.36.36 F03 3/8-4 UNF 0.0 0.39 0.73 M5 X 0.8P 3/4" 0.79 4.6 6.00 4.78 3.7 3.7.4.94.50.50 F03 3/8-4 UNF 0.0 0.34 0.70 M5 X 0.8P " 0.98 5.00 6.50 6.5 3.80 3.80.0 3.9 0.77.77 F04 7/6-0 UNF 0.9 0.60 0.85 M5 X 0.8P /".50 6.50 7.50 9.03 4.45 4.45 3.0 3.70.4.4 F05 DIMENSIONS 9/6-8 UNF 0.340 0.68.7 M6 X.0P ".00 7.00 8.50 9.03 4.8 4.8 3.47 4.30.6.6 F05 9/6-8 Figure UNF G04 0.340 G04 For 0.6 For.5 M6 X.0P /".56 7.50 9.50 3.75 6.70 6.70 3.54 4.05 3.76 3.76 F0 0 0 & -4 & UNF Valve 0.748 Valve / 0.6 #50 / #50.87 M0 X.5P 3" 3.00 8.00. 3.75 7.07 7.07 3.64 5.40 4.5 4.5 F0-4 UNF 0.748 0.6.87 M0 X.5P 4" 3.94 9.00.00 3.75 7.70 7.70 4.4 5.93 4.74 4.74 F0 A A -4 UNF 0.748.6 0.65.6.9 M0 X.5P 6" 6.00 5.50 5.88 37.40.. 7.64 7.60 7.7 7.7 F.7.08*.65 3.58 M X.75 B B 4.63 4.63 8" 7.88 8.00 9.75 37.40.57 3.38 8.66 9.33 7.7 8.64 F.7.08*.65 3.58 M X.75 0" 9.84.00.38 43.3 4.65 4.49 0.47.8 9.88 9.69 F4 C.97 C.6.377* 0.0.3 0.03.86 M6 X.0P ".80 4.00 5.50 43.3 6.6 6.06.00.80.46.6 F4.97.6.377*.3 3.86 M6 X.0P Class 600 Dimensions (Inches) D D.00.00 E E 9.5 9.5 Size Port A B C D M G H F I** F J K 0.00 W0.00 /" 0.59 6.50 6.89 3.5 3.5.34 F05 3/8-4 UNF H 0.4H 0.39 0.73 M6 4.7 X.0P 4.7 3/4" 0.79 7.50 6.89 3.68 3.40.48 F05 3/8-4 UNF L 0.4L 0.34 0.70 M6.60 X.0P.60 " 0.98 8.50 7.68 3.84 4.5.77 F05 9/6-8 UNF 0.393 0.60 0.85 M6 X.0P /".50 9.50 9.45 4.63 4.55.3 F07 3/4-6 UNF 0.47BRACKET 0.84.36 HT. HT. M8 X 5.8.5P 5.8 ".00.50 9.45 4.86 5.47.69 F07 3/4-6 UNF 0.47 0.77. M8 X.5P WEIGHT 0 0 3" 3.00 4.00 3.75 7.06 6.8 4.43 F0-4 UNS 0.748 0.53.79 M0 X.5P 4" 3.94 7.00 3.75 7.7 8.64 4.74 F0-4 UNS 0.748 0.7.93 M0 X.5P / / - 4-4 STEM STEM ARRANGEM FOR FOR ACTUATOR The dimensions above are for informational purposes only. Please contact Sharpe Valves if you need dimensions for construction ** +0.000/ -0.00 * +.000 / -.003 Page 5 of 7
600 Seat Pressure -Temperature Rating 500 400 300 00 Class 600 WCB Pressure (PSI) 00 000 900 800 700 600 RTFE TFM NOVA Class 600 CF8M Saturated Steam Curve Class 300 WCB 500 Class 300 CF8M 400 300 00 Class 50 WCB Class 50 CF8M 00 0 0 50 00 50 00 50 300 350 400 450 500 550 600 Temperature ( F) Note: The maximum pressure/temperature ratings of the valve assemblies are limited to lowest of the body or seat material fitted. The valve body ratings are based on ASME B6.34 rating for materials. The graphs are based on laboratory testing and our experience in field. The seat ratings depend on the material, design, application and function. TFM RTFE NOVA Sharpe Seat Materials M - TFM PTFE Dyneon TFM PTFE is a second generation PTFE with improved chemical and heat resistant properties and stress recovery. Its temperature range is -00 F to 500 F (-73 C to 60 C) Color - white. R - Reinforced Polytetrafluoroethylene (RTFE). PTFE s mechanical properties are enhanced by adding 5% filler material to provide improved strength, stability and wear resistance. Its temperature range is from -30 F to 450 F (-96 C to 3 C). Color-off-white. N - Nova This is a Teflon base filled with glass amorphous carbon powder and graphite. It has a lower thermal contractionexpansion than PTFE, and is ideal for steam or thermal fluid applications up to 550 F (88 C). Color - black. Page 6 of 7
Technical Information Size C v Weight (lbs.) Class50 Class 300 Class 600 / 6 4 5 6 3/4 50 6 7 8 94 8 0 -/ 60 5 9 480 0 33 38 -/ 750 36 50-3 50 45 68 78 4 0 75 96 46 6 5070 68 9-8 9330 9 378-0 4590 479 578-000 75 955 - Applicable Standards Wall Thickness ASME B6.34 Face to Face Dimensions ASME B6.0 Flange Dimensions ASME B6.5 NACE* Fire Safe Pressure Test *Class 50 and Class 300 with standard 36 SS Stem Class 600 has7-4ph material for Stem, 7-4PH is not a NACE material. How to Order MR-075 API 607 4th Edt. Basic Design ASME B6.34 ASME B6.34, API 598 (optional) Size Series Class Body Seat Options / FS50 50 4 Carbon Steel M TFM OH Oval Handle, Non-locking up to " 3/4 33 300 6 Stainless Steel R RTFE L Lockable Stem Extension, 36SS 66 600 (/ -, 3 and 4 ) N Nova -/ -/ 3 4 6 8 0 3/4 - FS50-33 - 4 - R - = 3/4 FS50334-R Example: 3/4 FS50334-R, 3/4 Fire Safe Series 50 Full Port, Split Body Flanged, Raised Face, Class 300 Ball Valve, Cast Carbon Steel Body with 36 Stainless Ball and Stem, RTFE Seats, Graphite Body Seal and Stem Packing. Due to continuous development of our product range, we reserve the right to change the dimensions and information for this product as required. 06/7 Page 7 of 7