NC30 Listing Please contact us if you cannot find what you require To order please telephone 01424 426383 or write to : NC30 Club, PO Box 48, Bexhill on Sea, East Sussex, TN40 2WY or email sales@nc30club.co.uk,. We can accept payment by Paypal or cheque. Parts available for most other makes and models CLUTCH Friction Plates Genuine 1 Set S-3018 113.09 0.25 kg CLUTCH FRICTION PLATES (EBC) 1 Set, NC30 S-3018-EBC 49.84 0.25 kg PLAIN CLUTCH PLATES (Each) 9 req. S-3020 8.70 0.5 kg SPRING SET (clutch) S-3022 43.91 0.75 kg CENTRE NUT(clutch) S-3023 5.93 0.01 kg Clutch Cover Gasket KJ6E43 10.44 0.01 kg RH Footrest Hanger Pattern part same design as original A-1003 41.48 O-RING CHAIN & SPROCKET KIT S-3011 123.68 Courier IZUMI H/D X-RING CHAIN S-3042 86.13 2 kg IZUMI H/D X-RING CHAIN (Gold Colour Sideplates) S-3042-GLD 91.88 2 kg DID X-RING CHAIN S-3044 104.54 2 kg 520 size kits available - TAPER HEADSTOCK BEARINGS Comprising of 2 No. Taper foller bearings O-1008 26.22 0.6 kg Taper headstock bearing Kit Comprising of 2 No. Taper roller bearings, 1 No. Honda Upper seal, 1 No. Special Lower seal and 1 No. Lock tab O-1006 40.17 GENUINE HEADSTOCK BEARINGS Comprising of 2 No. Honda caged ball bearings O-1007 62.83 comprising of 2 No caged ball bearings, 1 No. upper Genuine headstock bearing kit seal, 1 No. lower seal and 1 No. Lock Tab All Honda O-1005 72.82 HERO BLOB(each) Stops your footpegs wearing out S-3049 1.81 All the external fittings for the NC30 fairing. Not FAIRING BOLTS Set (GENUINE) including the Vee piece. K-1001 40.43 MISCELLANEOUS PARTS & ACCESSORIES - Model) M-4009 16.84 0.7kg WORKSHOP MANUAL (Haynes) M-4017 25.33 0.9kg SPEEDO UNDERLAY M-4012 32.70 0.1kg GENUINE NC30 BARENDS(each) M-4013 13.96 0.2 kg Bar End Screw Honda (Special) KJ6F515 2.33 Ignition Switch (Pattern) SW30 44.34 0.8 kg Regulator/Rectifier (Pattern) M-4026 92.62 1 kg Alternator Stator (Pattern) M-4029 78.38 1 kg Anodised BAR ENDS(Pair, Screw fitting) M-4022 -BK 18.28 RIGHT BAR GRIP M-4014A 8.22 LEFT BAR GRIP M-4014B 8.22
ANODISED LEVER SET (Red, Blue, Purple, Gold,Carbon look) M-4018 20.03 NC30 Vinyl Lettering Kit B-2014 74.96 Graphic Kit Castrol Honda (w Stripes) B-2014-01 203.28 Many types of graphic kits are available, from standard to race replica please ask - CARBON YOKE PROTECTER B-2015-30 18.50 0.1 kg CARBON TANK PROTECTOR B-2017-30 25.73 0.3 kg Carbon Clock Surround B-2019-30 24.79 0.2kg PERFORMANCE PARTS - HRC Style air box Q-1103 144.38 HRC Style Air Tray Q-2003 51.98 HRC Rear Brake Fluid Reservoir kit Q-4001 14.44 SPEED BOOSTER PP-1003 51.96 0.1 kg product - ALLOY REAR SETS PP-1015A 167.48 0.3 kg UPRATED FORK SPRINGS (Progressive Rate) PP-1030-30 90.67 1.2 kg GOODRIDGE BRAIDED STEEL BRAKE LINES - FRONT ZINC PLATED FITTINGS PP-1004-A-30 54.56 FRONT STAINLESS STEEL FITTINGS PP-1004-B-30 72.77 FRONT ANODISED ALLOY FITTINGS PP-1004-C-30 72.77 FRONT CHROME PLATED FITTINGS PP-1004-D-30 54.56 REAR LINE ZINC PLATED FITTINGS PP-1005-A-30 27.88 REAR LINE STAINLESS STEEL FITTINGS PP-1005-B-30 36.37 REAR LINE ANODISED ALLOY FITTINGS PP-1005-C-30 36.37 REAR LINE CHROME PLATED FITTINGS PP-1005-D-30 27.88 FULL SET ZINC PLATED FITTINGS PP-1008-D-30 78.81 FULL SET STAINLESS STEEL FITTINGS PP-1008-B-30 133.39 FULL SET ANODISED ALLOY FITTINGS PP-1008-C-30 133.39 FULL SET CHROME PLATED FITTINGS PP-1008-D-30 78.81 BODY-WORK - Made from our own moulds in most cases FAIRINGS (Supplied in grey primer) ROAD (6 Part) NC30 B-2001-B6-30 297.12 ENDURANCE (2 pa, Single Headlight - Suzuka 92 B-2001-B2-END 230.71 RACE (2 part) NC30 F111 90 B-2001-B2-RAC 219.85 SINGLE SEAT TAIL UNIT NC30 Race B-2002-B 100.06 NC30 Road, Dual seat B-2002-A 118.24 Front Fender NC30 B-2003-B 36.37 HUGGER FIBRE-GLASS WOVEN B-2005-B 103.08 CARBON B-2005-C 157.60 SEAT COWL Simply replaces your Pillion seat and uses your original fittings SEAT COWL B-2004-30 61.84 1.2 kg Mirrors Mirrors Std Import Genuine Honda (No flop) B-2006-IL or IR 44.02 0.25 kg SCREENS Carriage type or weight Extended Arm Import B-2006-XL or XR 37.54 0.25 kg SCREENS Std B-2007-30 43.65 0.5 kg
Double Bubble B-2007-DB-30 60.58 0.7 kg LIGHT COVERS State colour when ordering B-2008-30 22.93 SCREEN SCREW KIT INDICATORS State LH or RH (B-2XXX-L, -R) Stainless Steel B-2016-SS 5.72 Plastic B-2016-PB 4.25 Aluminium B-2016-A 13.57 Pattern Large (UK Spec) B-2009-LL or LR 16.23 0.4 kg Pattern Large (Import, NC30 L - N) B-2010 16.77 0.4 kg Pattern Small (NC30 K) B-2011 16.77 0.15 kg B-2050-BLK or - Baglux NC30 Tank Harness - Black, Red/Black REDBLK 94.02 1kg Baglux Delta Bag - Black B-2051-BLK 95.29 0.75 kg Fork Stanchions, NC30, Pattern Late M-5100 120.70 Fork Stanchions, NC30, Pattern Early M-5200 120.70 FORK SEALS (Pair quality Japanese) S-3017 9.71 Genuine Honda fork seal kit (for one fork leg) comprising of 1 No. Fluid seal and 1 No. Dust seal KJ6F8117 21.82 Fork Overhaul Kit For '89 K Model (Genuine Honda Parts) Comprises: 1 each of Snap ring, Upper Bush, Lower bush, For One Fork Leg Fork Overhaul Kit For '90 on Models (Genuine Honda Comprises: 1 each of Snap ring, Upper Bush, Lower bush, Parts) For One Fork Leg Basic Fork Overhaul Kit For One Fork Leg (Genuine Honda Comprises1 each of Upper Bush, Lower Bush, Seal Kit and Parts) Budjet Fork Overhaul Kit Seal kit, Damper Piston Ring, Drain screw seal, retainer O-1001 51.07 Seal kit, Drain screw seal, retainer seal, Cap O-ring, O-1002 46.15 retainer seal O-1003 37.01 Comprises 1 each of Upper Bush, Lower Bush, Fork Seal and retainer seal O-1004 19.95 Rebuilt Rear susp unit M-5300 152.06 Exchange Rebuilt & Revalved Rear Susp Unit M-5301 152.06 Exchange Rebuilt & Revalved Rear Susp Unit (Spring Pre-loaded) M-5302 168.57 Exchange Heavier Weight Spring 800lb M-5480 57.75 Fitted to above Lighter Weight Spring M-5470 57.75 Fitted to above Swinging Arm Overhaul Kit (Genuine Honda Parts) Comprises: 1 No. Needle Bearing, 2 No. Ball Bearings, 2 No. Dust Seals, 1 No. Circlip O-1009 47.68 Swinging Arm Bearing Set (Genuine Honda Parts) Compising of 1 No. Needle Beaing and 2 No. Ball Bearings O-1010 37.91 Rear Suspension Link Arm Overhaul Kit (Genuine Honda Parts) Comprises: 2 No. Needle Bearings, 2 No. Dust Seals O-1013 33.88 Rear Suspension Rocker Arm Overhaul Kit (Genuine Comprises: 1 No. Shock Eye Bush, 3 No. Needle Bearings, Honda Parts) 4 No Dust Seals O_1014 65.52 Wavy Disc Front M-5080 217.14 Front Disc, Pattern Complete with center M-5070 158.80 Front Disc, Pattern ( Exchange on centers) M-5060 126.41 Exchange Rear Disc, Patten S-3071 126.41 Race Tolerance, Pattern Discs Available Rear wheel Bearing & Seal Kit (genuine Honda) O-2015 147.41 Rear Wheel Bearing & Seal Kit Front Wheel bearings (Pair) S-3056 9.83 Foam Filter Element PP-2006 17.33 CARB JET KIT (NC30) PP-1007-30 80.84 0.1 kg Carb Parts Honda rebuild kit (per carb) KJ6E1611 43.05 Pattern Float Bowl Seal (per carb) CP-1001 2.97 Honda Float Valve set (per carb) KJ6E16112 30.05
Main Jet State size (inc 2.5) KJET-(XXX) 2.24 SERVICE ITEMS BRAKE PADS FRONT BRAKE PADS - EBC S-3001 20.20 FRONT BRAKE PADS - EBC HH (Sintered) S-3002 22.73 REAR BRAKE PADS - EBC S-3003 17.81 0.2 kg Front Caliper Seal Set (Per Caliper) 2 No Large Fluid Seals, 2 No. Small fluid seals. 2 No. Large dust seals, 2 No. small dust seals and 2 No. joint seals S-3130 31.77 Front Master Cylinder Rebuild Kit (Nissin) K-1012 10.90 FRONT DISC LH - EBC PROLITE S-3060-L 169.58 0.2 kg FRONT DISC RH - EBC PR0LITE S-3060-R 169.58 0.2 kg REAR DISC - EBC S-3061 141.07 FRONT BRAKE LEVER & ADJUSTER S-3019 12.22 CLUTCH LEVER S-3006 5.15 0.15 kg REAR BRAKE PEDAL S-3007 80.33 0.2 kg GEAR CHANGE PEDAL S-3008 65.11 0.1 kg THROTTLE CABLE A S-3040 9.01 THROTTLE CABLE B S-3041 9.83 CHOKE CABLE (Genuine) S-3009 16.72 CLUTCH CABLE S-3010 14.25 SPEEDO CABLE S-3045 10.18 OIL FILTER Honda KJ6E1011 12.13 Oil Filter (OE Quality ) S-3012 8.47 AIR FILTER S-3013 23.01 Air Filter Genuine Honda KJ6F161 30.32 SPARK PLUG NGK ER9-EH S-3014-9 14.85 PLUG CAPS S-3015 POA BATTERY S-3016 41.93 Courier POSTAGE AND PACKAGING (For Inland United Kingdom) For International charges please contact office Up to 500g 2.85 Up to 1Kilo 4.80 Up to 2 Kilos 8.90 Over 2 Kilos By Parcelpost 12.50 Courier 26.00 Some prices are not detailed on this list, as we are constantly trying to obtain the best prices on these products, whereas others are special order products. If you require a product that does not have a price yet, phone us and find out what the current situation is. Prices may change due to fluctuating market forces. Engine Overhaul Parts Head Gasket KJ6E0207 37.14 Inlet Valve Stem Seal KJ6E0302 8.96 Exhaust Valve Stem Seal KJ6E0301 8.96 Inlet Valve Guide (OS) KJ6E0205 9.51
Exhaust Valve Guide (OS) KJ6E0203 10.61 Inlet Valve KJ6E0315 22.37 Exhaust Valve KJ6E0316 44.87 Sump Gasket KJ6E1002 8.89 Piston Ring Set KJ6E1201 37.28 Piston Pin Circlip KJ6E1204 1.91 Big End Bolt KJ6E1206 6.44 Big End Nut KJ6E1207 1.12 Piston Pin KJ6E1203 11.16 Last Updated on 16/07/09 By NC30 Club Email: sales@nc30club.co.uk