Maximum lifting height: 7,56 m Maximum reach: 4,26 m Engine: Mercedes 95 KW Maximum lifting height: 57.6 ft Maximum reach: 46.8 ft Engine: Mercedes 29 HP Electronically controlled hydrostatic transmission Automatic levelling device RTH5.8
Full visibility cab 360 fully extended stabilizers load chart with forks Frontal position load chart on tyres with forks Extendable rotating platform REP 2/5 Telescopic jib platform TP MAGNI patented design ft 89.40 ft 6.09 ft 57.6 ft 56.92 205/ 400/ 47.44 55.2 mm/in mm/in 000/ 39.37 6 / 7,7 500/02 300/66,92 /9 / 2,094 /,020 / 8,88 360 load chart on tyres with forks Pressurized cab ISO 0.263 Winch W 3,5 3.5 ft 55.2 Standard air conditioning and heating ft 87.53 ft 6.6 3.5 ft 50.52 580 mm 22.83 in Touch screen display with joystick control system / 4,89 / 3,527 / 5,07 /,984 Jib with winch JW 2000 JW 800 ft 54.79 25 mm 83.27 in 4570 mm 79.92 in ft 57.09 Load Moment Indicator screen Air conditioning management screen / 3,858 / 992 /,22 Stabilizers control screen screen / 2,35 Travelling mode / 3,97 From the left: A 3 in machine: Telescopic handler Hydraulic crane Access platform (Option) Safety device to prevent unhooking of the attachment (MAGNI patent) Attachments automatic recognition system RFID
Full visibility cab 360 fully extended stabilizers load chart with forks Frontal position load chart on tyres with forks Extendable rotating platform REP 2/5 Telescopic jib platform TP MAGNI patented design ft 89.40 ft 6.09 ft 57.6 ft 56.92 205/ 400/ 47.44 55.2 mm/in mm/in 000/ 39.37 6 / 7,7 500/02 300/66,92 /9 / 2,094 /,020 / 8,88 360 load chart on tyres with forks Pressurized cab ISO 0.263 Winch W 3,5 3.5 ft 55.2 Standard air conditioning and heating ft 87.53 ft 6.6 3.5 ft 50.52 580 mm 22.83 in Touch screen display with joystick control system / 4,89 / 3,527 / 5,07 /,984 Jib with winch JW 2000 JW 800 ft 54.79 25 mm 83.27 in 4570 mm 79.92 in ft 57.09 Load Moment Indicator screen Air conditioning management screen / 3,858 / 992 /,22 Stabilizers control screen screen / 2,35 Travelling mode / 3,97 From the left: A 3 in machine: Telescopic handler Hydraulic crane Access platform (Option) Safety device to prevent unhooking of the attachment (MAGNI patent) Attachments automatic recognition system RFID
Full visibility cab 360 fully extended stabilizers load chart with forks Frontal position load chart on tyres with forks Extendable rotating platform REP 2/5 Telescopic jib platform TP MAGNI patented design ft 89.40 ft 6.09 ft 57.6 ft 56.92 205/ 400/ 47.44 55.2 mm/in mm/in 000/ 39.37 6 / 7,7 500/02 300/66,92 /9 / 2,094 /,020 / 8,88 360 load chart on tyres with forks Pressurized cab ISO 0.263 Winch W 3,5 3.5 ft 55.2 Standard air conditioning and heating ft 87.53 ft 6.6 3.5 ft 50.52 580 mm 22.83 in Touch screen display with joystick control system / 4,89 / 3,527 / 5,07 /,984 Jib with winch JW 2000 JW 800 ft 54.79 25 mm 83.27 in 4570 mm 79.92 in ft 57.09 Load Moment Indicator screen Air conditioning management screen / 3,858 / 992 /,22 Stabilizers control screen screen / 2,35 Travelling mode / 3,97 From the left: A 3 in machine: Telescopic handler Hydraulic crane Access platform (Option) Safety device to prevent unhooking of the attachment (MAGNI patent) Attachments automatic recognition system RFID
RTH5.8 MACHINE MODEL ENGINE TRANSMISSION AXLES AND BRAKES PERFORMANCE WEIGHTS TANKS CAPACITIES HYDRAULIC CIRCUIT DIMENSIONS CONFORMTY TO STANDARDS Rotating telescopic handler RTH 5.8 Maximum lifting capacity 4.999 kg (center of gravity ) Maximum lifting height 7,56 m Type Mercedes OM 924 LA Euro 4 Interim Rated power 95 KW at 2.200 rpm Maximum torque 500 Nm at.400 rpm Displacement 4,8 l Cylinders 4 in line Fuel Diesel direct injection turbocharged Cooling system Water intercooler Type Hydrostatic Model Bosch Rexroth Maximum pressure 500 bar Displacements Variable displacement pump (max 65 cc/r) el. controlled Variable displacement motor (max 85 cc/r) Gear box 2 speeds (4,53-,43) forward-reverse Total ratio 7,5 on each axle Rear axle Oscillating and steering with hydraulic locking Front axle Steering Service brake Hydraulically activated, oil-immersed multi-disc type on each axle Parking brake Hydraulic with negative action Tyres dimensions 8x9,5 Max. travel speed 40 km/h 24.8 mph Drawbar pull 80 Kn 8,57 kg Gradeability 44% Turning radius (end of forks) 6,34 m Total unladen 3.000 kg Front axle unladen (boom retracted and lowered) 6.00 kg Rear axle unladen (boom retracted and lowered) 6.900 kg Fuel tank 65 l AdBlue 40 l Hydraulic oil tank 80 l Engine oil tank 6 l Cooling liquid 20 l Max. operating system pressure 350 bar Circuit type Load sensing Service pump Bosch Rexroth Variable displacement (max 40 cc/r) Flow rate 90 l/min Controls for boom and turret movements Sauer Danfoss Electroproportional valve SIL 2 Controls for stabilizers Bosch Rexroth Electro-hydraulics controls Movements control Max. length (boom retracted and lowered) 6.596 mm (at vertical point of forks foothold) Max. width 2.492 mm (on wheels) Max. height (boom retracted and lowered) 3.039 mm (on wheels) Wheel base 2.900 mm Ground clearance 35 mm EN 3849: concerning the safety of all controls of the machine EN 3000: concerning the standard of hydraulic cranes EN 280: concerning the standard of aerial platforms EN 5000: concerning the dynamic stability of the telescopic forklift FOPS/ROPS 97/68/CE: concerning engine emissions standards,02 lbs (center of gravity 9.7 in) 57.6 ft 29 HP at 2.200 rpm 369 ft lbs at.400 rpm.3 gal 7,252 psi Variable displacement pump(max 4 cu in/r) el.controlled Variable displacement motor (max 5.2 cu in) 20.8 ft 28,660 lbs 3,448 lbs 5,22 lbs 43.6 gal 0.6 gal 47.6 gal 4.2 gal 5.3 gal 5,076 psi Bosch Rexroth Variable displacement (max 2.4cu in/r) Flow rate 23.8 gal/min 2 joystick Sauer Danfoss with two shafts with dead man safety device Management with CAN bus technology 259.7 in (at vertical point of forks foothold) 98. in (on wheels) 9.6 in (on wheels) 4.2 in 2.4 in [mm / in] 2582/0.65 030 4980/96.06 030/40.55 2582 22 60/2.36 200/ 47.24 525/ 60.04 040/ 40.94 450/50.09 2900/4.7 6596/259.68 040/ 40.94 35/2.40 3039/9.64 50/5.90 R6340/249.6 2050 2492 3903 443 76 443/73.74 R463/82.32 R503/98.07 22 60 76/6.93 2050/80.7 450 2492/98. 525 040 2900 200 3903/53.66 6596 443/73.74 04
Magni Telescopic Handlers srl Via Magellano, 22-403 Castelfranco Emilia, Modena, Italia Tel: +39 059 86308 - Fax: +39 059 863802 commerciale@magnith.com - www.magnith.com The data in this brochure are informative and subject to change without notice 030 35 3039 0 2050 2492 3903 443 76