Job Information Type: VINCI-LED Catalog #: Project: Comments: Prepared by: YEAR WARRANTY WARRANTY TEN INCLUDES LABOR ALLOWANCE Vinci Vinci Large 7⅞ ¼ ⅝ 9¾ ½ ⅛ Applications Wall/Surface Post/Bollard Low Level Flood Lighting Inverted Site Lighting Ordering Information Description The Vinci-LED is an architectural style luminaire providing maximum light output using energyefficient LEDs. With sturdy die-cast aluminum construction, this low-profile fixture includes a universal back box, stainless steel hardware and a sealed, gasketed optical compartment which makes Vinci-LED secure from outside contaminants. Designed for floodlight, pathway illumination, wall/ surface applications, inverted mount for canopy lighting, post and bollard and site lighting. Common applications include school and institution, warehouse, apartment and condominium complexes, loading docks and more. Example: (VINCI-LED-8--UNV-BZ-YM) VINCI-LED Series Wattage/Lumen Color Temp. Voltage Finish Option Wall/Area/Flood Lighting 8 W/, W/9, W/, W/,, 8W/89,, K K K UNV -77V BZ WH Bronze White PC HK YM SF PM Photocell (-77V), Heavy Duty Adjustable Knuckle Yoke Mount, Slip Fitter, Pole Mount, Standard for fixture Vinci Large Model Only Delivered Lumens (K) -- See table on Page DLC Listed Wattage -- See DLC matrix on Page W, W, W Require Pencil Photocell (See Page ) 7 Deco Lighting, www.getdeco.com T: (8) -DECO F: () -8 Rev Date: 9//7 #7
Features Construction Low-profile die-cast aluminum LED fixture with hinged, removable door and back box. Available from W to 8W. Three half-inch, NP threaded conduit entry points included in back box, which mounts to standard / to round and octagonal, square, single gang and masonry junction boxes. Key hole gasket adapts to j-box and wall. Silicone gasket seals the door and back box. Compliance to FDA/USDA requirements and/or NSF splash-zone certification. CSA Listed for Wet Locations - IP7 Optical Mirrored, anodized reflector located inside silicone-sealed optical chamber to provide maximum efficiency and high illumination. Impact-resistant tempered glass included in optical assembly, meeting IESNA requirements for full cutoff. Solid state LEDs thermally optimized with multiple lumen packages from a warm K LED color temp to a cool K (CCT). Electrical -77V /Hz. Heat sinking optimization due to LED driver mounted to fixture s die-cast housing. Thermal management system uses conduction and natural convection to transfer heat away from LED source. Three halfinch NPT threaded conduit entry points allow thru-branch wiring and the back box is an authorized electrical wiring compartment. Vinci-LED luminaires maintain greater than 7 of initial light output after, hours of operation. Integral LED electronic driver includes surge protector. Finish Vinci-LED has a super durable DECO Guard carbon bronze powder coat finish which can withstand extreme climate conditions while still maintaining optimal color and gloss retention during the installed life of the fixture. Pole Mount Drilling Pattern Universal Pencil Photocell (-W Required) in (mm) Ø.in (.7mm) Ø in (.mm) in (.mm) in (.8mm) Performance Data CRI: 8+ CCT: K, K, K Warranty: yr. Limited Warranty Dimming: Available with -V inputs dimming down to Operating Temperature: - to + C Max Ambient L7 Rating:,+ Hours IP Rating: IP7 Power Factor >.9 Total Harmonic Distortion (THD): < Sound Rating: Class A (inaudible in a db ambient environment) BUG Rating (-W): Type III B U G BUG Rating (-8W): Type III B U G 7 Deco Lighting, www.getdeco.com T: (8) -DECO F: () -8 Rev Date: 9//7 #7
Lumen Output Lumen Chart Nominal Wattage System Wattage K Lumens LPW (lm/w) W. 7 W. 9 8 W 8. 8 W. 8W 8. 89 CCT Multiplier Factors: K -.; K -.9; K -.9 Vinci 7⅞ ⅝ DLC Listed W W W W 8W K K X X X X X K X X X X X DLC-listed models above are listed under Flood, Area, and Wall- Mount primary use categories Vinci Large Length with mount (L): Bracket (BR): ⅞ Knuckle (KN): ⅞ Slipfitter (SF): ⅜ Mounting Arm (EM): Mounting Arm (EM): Mounting Arm (EM): 8 9¾ ⅝ ½ Length with mount (L): Yoke (YM): 7 /8 Knuckle (HK): 7 /8 Slipfitter (SF): /8 Pole Mount Arm (PM): L ⅛ ¼ Heavy Duty Adjustable Knuckle Heavy Duty Adjustable Knuckle Yoke Mount Slip Fitter Pole Mount Arm 7 Deco Lighting, www.getdeco.com T: (8) -DECO F: () -8 Rev Date: 9//7 #7
Photometric Data W K Polar Candela Distribution Isolux Plot,,7 8 7 House Side,, 7 7 9 8 7 Type I Type II Type III, Type IV,,7, - Max Cd: H - H - 9 H VA: Long Medium Short Very short fc fc fc. fc fc. fc Max Cd Distance in units of mount height (ft) Street Side Max Cd Zonal Lumen Summary LCS Graph Zone Lumens %Luminaire -,88.7.% -,..% -,8.79.% -9. 8.8% 7-..% 9-. -9,. 9-8. -8,. UL 9- lm BVH 8-9 lm.% % 7% 8% 9% UH -8º lm UH 9-º lm FVH 8-9. lm BH -8 9. lm.% FH -8 9.9 lm.% BM - Back Light 8.7 lm.% Scale = Max LCS % Trapped Light:. lm, BM -. lm.8% FL - 7.7 lm 8.8% FH - 7.9 lm.% Forward Light 7 Deco Lighting, www.getdeco.com T: (8) -DECO F: () -8 Rev Date: 9//7 #7
Photometric Data 8W K Polar Candela Distribution Isolux Plot,,7 8 7 House Side,, 7 7 9 8 7 Type I Type II Type III, Type IV,,7, - Max Cd: H - H - 9 H VA: Very short Street Side fc fc fc. fc fc. fc Max Cd Distance in units of mount height (ft) Short Medium Long Max Cd Zonal Lumen Summary LCS Graph Zone Lumens %Luminaire -,87..% -,9..% - 7,7. 87.% -9,..9% 7-..% 9-. -9 8,9. 9-8. -8 8,9. UL 9-. lm.% BVH 8-9. lm.% UH -8º lm UH 9-º. lm FVH 8-9.7 lm BH -8 9. lm.% FH -8 7. lm 8.% BM - Back Light. lm.% Scale = Max LCS % Trapped Light:. lm, BM -. lm.8% FL -. lm 8.7% FH - 9.9 lm.% Forward Light 7 Deco Lighting, www.getdeco.com T: (8) -DECO F: () -8 Rev Date: 9//7 #7