Aquareva Skimmers by SL-119-M Table of contents Page 2 Aquareva skimmers - Technical data Page 3 Page 4 Masonry/ Liner Concrete Technical data: Made in France, Aquareva skimmers embody the latest in technological innovation to guarantee reliability and quality. The Aquareva range of skimmers can be divided into six categories, each dedicated to a particular type of pool; Masonry/liner pools, traditional concrete pools, panel pools, polyester shell pools, pools with a wooden structure and above-ground pools. Page 5 Page 6 Page 7 Page 8 Panels/ Liner Polyester shell Wood and Above-ground Skimmer lid frame Skimmer mouth and face trim Aquareva Color Features: Made of pool grade, anti-uv treated ABS, Self-adhesive elastomer seals, Screws made entirely of stainless steel, identical for each part, Protective work site covers, Available in a range of colours, Made in France. www.procopi.comw
by Aquareva Aquareva skimmer advantages PROCOPI manufactures Aquareva skimmers in its factory in Brittany, France. All the skimmers are made of anti-uv treated ABS. Anti-UV treated, pool chemical resistant ABS gives Aquareva skimmers a bright finish that doesn t fade over time under normal conditions of use. The bodies of the liner and concrete versions of each Aquareva skimmer model are identical. In the event of leaks in a traditional pool fitted with Aquareva skimmers, a reinforced membrane or liner can be easily fitted. The concrete skimmer is transformed into a liner skimmer by the simple addition of the necessary flange, seals and screws. Work site protective covers. The self-adhesive work site covers delivered with each Aquareva skimmer are intended to be fitted over the skimmer to protect the skimmer body and the screw housings and stop them from being damaged or filled in with cement or concrete while the pool is being built. Single type of screw. All the screws required to fit an Aquareva skimmer are made of 18/10 stainless steel and are identical. Therefore it is easy to keep a supply in stock for future requirements. Self-adhesive seals. The liner versions of Aquareva skimmers come with 2 self-adhesive elastomer seals that are very easy to install and resistant to pool treatment chemicals. Box of 2. SL-119 (Liner) skimmers and SB-118 (Concrete) skimmers are sold in boxes of 2, this reduces their cost by 10%. Jet-Vac Jet-Vac replaces the skimmer weir. The Jet Vac floats in the skimmer basket increasing the skimmer s surface suction rate. 4/ Face plate. The face plate on Aquareva skimmers clips onto the flange for a clean finish. 5/ Weir damper. A stopper in the throat of the skimmer lessens the noise made by the weir while the pool water is agitated. 6/ Pre-fix collar. Aquareva skimmers feature a pre-fix collar to enable mounting on prefabricated pool structures. 3/ Choice of skimmer mouths. With Aquareva skimmers you can choose either a wide or a standard mouth. 4 3 6 8/ Lateral outlet. A 63 mm PVC spacer can be fitted here between the skimmer and the pool wall to further stabilise the skimmer s seating. 2/ Wide choice of lengths. Thanks to its modular design, the length of the skimmer throat can be adjusted between 20 and 457 mm to adapt to any configuration (coping, automatic cover pit, etc. ). 5 2 8 7 1/ Locking mechanism. The skimmer lid features a locking mechanism to prevent it from being opened accidently. Good protection for children. Telescopic lid frame. The lid fits into a frame that slides into the body of the skimmer. The height can thus be adjusted to lie flush with the pool deck. 1 11 11/ 50 mm overflow. This may be connected to waste with standard 50 mm PVC pipes used for filtration. Evacuates water very efficiently in the event of heavy rain. The overflow is sealed by a disc that may be pierced at one of several circular indentations allowing the height of the overflow to be selected in 5 mm increments. 7/ Self-locking skimmer basket. Bayonets protruding from the side of the basket lock it into place in the skimmer. This prevents the basket from floating up when the filtration pump stops. The basket can be lined with a Pool Bag to improve filtration finesse. 9 10 p. 2 9/ Flow regulator The body of the Aquareva skimmer features a mobile flap to adjust the rate at which water is drawn into the skimmer. 10/ Bottom outlet. This 2 tapped outlet accepts a threaded adaptor socket (2 x 63 ou 2 x 50) to connect the skimmer to the filtration system. These adaptor sockets are cheaper than tapped sockets of the same dimensions. The 1 1/2 threading is used to install a gizmo (protects the skimmers against freezing).
Masonry / Liner 24.4 187 126 466.3 68 SL-101 Code : 40022000 - Small mouth SL-111-M Code : 40031000 - Small mouth SL-115-M Code : 40041000 - Small mouth with extension SL-117-M Code : 40051000 - Wide mouth Code : 40061081 - Light blue Code : 40061082 - Dark blue Code : 40061084 - Caribbean green Code : 40061085 - Beige Code : 40061088 - Grey Code : 40061087 - Anthracite grey Code : 40061089 - Black SL-119-M Code : 40061000 - Wide mouth with extension SL-119CA-M-2 Code : 40071200 - For automatic covers p. 3
by Aquareva by Concrete Ø208 42.7 187 466.3 126 68 SB-100 Code : 40620000 - Small mouth SB-110 Code : 40630000 - Small mouth SB-114 Code : 40640000 - Small mouth with extension SB-116 Code : 40650000 - Wide mouth SB-118 Code : 40660000 - Wide mouth with extension p. 4 SB-118CA-2 Code : 40670200 - For automatic covers
Panels / Liner SL-115-P Code : 40241000 - Small mouth with extension SL-117-P Code : 40251000 - Wide mouth Code : 40261081 - Light blue Code : 40261082 - Dark blue Code : 40261084 - Caribbean green Code : 40261085 - Beige Code : 40261088 - Grey Code : 40261087 - Anthracite grey Code : 40261089 - Black SL-119-P Code : 40261000 - Wide mouth with extension SL-119CA-P-2 Code : 40271200 - For automatic covers p. 5
by Aquareva Polyester shell SL-115-C Code : 40441000 - Small mouth + extension SL-117-C Code : 40451000 - Wide mouth SL-119-C Code : 40461000 - Wide mouth with extension p. 6
Wooden pools Ø208 42.7 187 SL-101-W Code : 40322100 - Small mouth, for wall 45 mm wide SL-111-W Code : 40323100 - Standard mouth, for wall 45 mm wide SL-115-W Code : 40324100 - Mouth with extension, for wall 45 mm wide Above-ground pool SL-101-HS Code : 40522000 - Small mouth Ø 200 35 ± 30 0 à 360 Ø 92 259,5 466.3 126 68 SF-201-HS Ø 38 Code : 40500000 - Floating Skimmer p. 7
Skimmers are also available in a range of 7 colours as part of the Aquareva Color range: Light blue, Dark blue, Caribbean green, Beige, Grey, Anthracite grey and Black. Choice and harmony thoughout the range! Exclusively from Accessories Wide mouth skimmer throat trim for SL-117/119 and SB-116/118 Jet Vac R300.2 217.5 156.9 126.9 159.2 83.1, 9 215.2 555.7 Code : 40961081 - Light blue Code : 40961082 - Dark blue Code : 40961084 - Caribbean green Code : 40961085 - Beige Code : 40961088 - Grey Code : 40961087 - Anthracite grey Code : 40961089 - Black JV-200 SV-200 PB-200-3 Code : 48001030 Jet Vac, adapts to the skimmer basket. Skim-Vac Code : 48001016 Universal Skim-Vac with lateral outlet. Pool Bag Code : 48001009 Pool Bag in reusable polyester, sold in threes. Dealer s stamp: Non-contractual document. Technical data is provided for information purposes only and may be subject to modification without prior notification. Copyright protected. Please do not litter. Created by: Groupe PROCOPI (11/ 2008a) www.procopi.comw