Totally Integrated Power SIVACON 8PS Modern and cost-efficient power supply Product overview of BD01 and BD2 busbar trunking systems siemens.com/busbar
Cost-efficient and safe power distribution Whether photo studio or do-it-yourself store, whether restaurant, multi-story office complex or industrial applications: The competitive pressure imposed upon the planning and installation of power distribution systems is continuously increasing. Today, a reliable and efficient supply of a multitude of varying consumers is no longer sufficient ever more factors have to be taken into account, all of which target at the most important aspect: efficiency. Even though power supply is of major importance for many companies, both the budgets as well as the readiness to invest are on the decline. On the other hand, the request of being able to source power at all times and everywhere in the building is steadily rising. Fulfilling these requirements, the SIVACON 8PS busbar trunking systems offer real headstart over your competitors. As a technologically superior alternative to the application of cables, they combine cost-effectiveness, flexibility and safety. The advantages at a glance More safety in every environment: Maximum short-circuit rating and minimum fire load reduce risks. More flexibility for each focus: Flexible tap-off units and modular system components simplify modifications and expansions. More typical uses, more orders: From the car service station through the bakery to manufacturing technology. More perspectives in planning: Modular system as a basis for complete freedom in planning. More productivity at all levels: Time saving compared with cables thanks to easy system installation. 2
SIVACON 8PS busbar trunking systems BD01 system overview The BD01 busbar trunking system is designed for applications from 40 A to 160 A. There are 5 different current ratings available for only one size, which means that all other components can generally be used for the 5 current ratings. Technical data BD01 Rated current 40 A, 63 A, 100 A, 125 A, 160 A Rated operational voltage Degree of protection Tap-off point 400 V AC IP54, IP55 Either 0.5 m or 1 m on one side Rated current of the tap-off units Up to 63 A BD2 system overview The BD2 busbar trunking system is universally applicable for flexible power supply to consumers in industry and trade. Other applications are power transmission between two points of supply, or as rising main busbar in high-rise buildings. Technical data BD2 Rated current 160 A, 250 A, 400 A, 630 A, 800 A, 1000 A, 1250 A Rated operational voltage Degree of protection 690 V AC IP52, IP54, IP55 Tap-off point Rated current of the tap-off units Every 0.5 m on one side, offset on both sides every 0.25 m Up to 530 A 3
BD01 busbar trunking system 02 01 03 06 01 Busbar trunking unit 02 Junction unit 03 Feeding unit Tap-off unit Ancillary equipment unit 06 Suspension bracket Safe and demand-oriented power supply The BD01 system is employed in trade and industry enterprises to safely supply small consumers with power or realise the infeed of a lighting system. Planning is especially simple and it ensures a flexible power supply. In addition to the pre-wired tap-off units, which can also be individually equipped with components, numerous add-on devices such as protective devices or combinations with SCHUKO or CEE socket outlets are available. Guided mounting and clear consumer assignment The reliable mechanical and electrical connection technology guarantees error-free installation thanks to the asymmetry of the connection point of the BD01 system. The codable tap-off points and units can be clearly assigned to the consumers. The operating personnel are afforded a high degree of protection by the guided mounting of the tap-off units. The tap-off points are only automatically opened upon connection of the tap-off units. As soon as these units are removed, the tap-off points close automatically. 4
Selection and ordering data BD01 busbar trunking system Busbar trunking units, with clamp terminal, painted RAL 7035 Rated current 40 A 63 A 100 A 125 A 160 A Length 2 m, BD01-40-2-0.5 BD01-63-2-0.5 BD01-100-2-0.5 BD01-125-2-0.5 BD01-160-2-0.5 distance of tap-off BVP: 034254 BVP: 034256 BVP: 034258 BVP: 090161 BVP: 090162 NSV0_00241 Length 3 m, distance of tap-off Feeding units (incl. 2 end flanges) NSV0_00242 NSV0_00274 BD01-40-3-0.5 BVP: 034253 BD01-63-3-0.5 BVP: 034255 BD01-100-3-0.5 BVP: 034257 BD01-125-3-0.5 BVP: 090163 Rated current up to 100 A up to 160 A BD01-E BVP: 034259 BD01-160-E BVP: 090165 Flexible junction unit, with clamp terminal Rated current up to 100 A up to 160 A Length 0.5 m BD01-R1 BD01-160-R1 BVP: 034260 BVP: 090166 Length 1.0 m BD01-R2 BD01-160-R2 BVP: 034261 BVP: 090167 NSV0_00245 BD01-160-3-0.5 BVP: 090164 Tap-off units, molded plastic, size 01/02 Rated current 16 A 32 A 16 A 32 A for 3 cylinder fuses 10 mm x 38 mm with 1-pole MCB B16, for free equipping, with 2-pole RCCB with DIN rail for 16 A/30 ma, 3 MW (Pv max. 13 W) 2 Schuko socket outlets BD01-AK01X/ZS BD01-AK02X/ZS3 BD01-AK02M0/ BD01-AK02M0/F 2SD163FIA161 BVP: 087483 BVP: 085090 BVP: 090168 BVP: 085093 Tap-off units, aluminum, size 1 Rated current 16 A 35 A 16 A 35 A NSV0_00249 with 3-pole fuse D01 BD01-AK1X/S14 BVP: 034264 with 3-pole fuse D02 BD01-AK1X/S18 BVP: 034265 with 3 x 1-pole MCB B16 BD01-AK1M1/A161 BVP: 034266 for free equipping, with DIN rail for 4 MW (Pv max. 13 W) BD01-AK1M1/F BVP: 034273 Tap-off units, aluminum, size 2 Rated current 16 A 25 A 32 A 63 A with 1-pole with 3-pole with 3-pole for free equipping, MCB B16, fuse S 27 MCB C32, with with DIN rail for with 2-pole CEE socket outlet 8 MW RCCB 16 A/30 ma, 32 A, 5-pole (Pv max. 22.5 W) with 2 Schuko socket outlets NSV0_00258 BD01-AK2M1/ 2SD163FIA161 BVP: 034276 BD01-AK2X/S27 BVP: 034274 BD01-AK2M1/ CEE325A323 BVP: 034282 BD01-AK2HM2/F BVP: 233571 Fixing material NSV0_00276 Suspension bracket Universal fixing bracket Suspension bracket for rope and chain suspension BD01-BA BVP: 081945 BD01-B BVP: 034262 BD01-BAP BVP: 203522 5
BD2 busbar trunking system 02 02 03 01 03 03 01 Busbar trunking unit 02 Junction unit 03 Feeding unit Tap-off unit Accessories Safe operation and reliable fire protection The BD2 system is particularly suited for applications with increased safety requirements. The tested fire barrier and functional endurance in case of fire ensure a high degree of safety and thus represent an optimum solution for large buildings and industrial applications. The compact system not only stands out for its safe operational behaviour, but also for its minimum space requirements. It can also be used for the infeed of the smaller BD01 system. Easy and quick installation with access protection The anti-rotation feature and guided installation increase safety during the installation of the system. The clamp terminal, which includes a single-bolt terminal, permits simple and quick installation with built-in expansion compensation. Sealable tap-off points protect against unauthorised access. In addition, numerous components for 3D junction units permit a flexible adaptation to the building structure in question. 6
Selection and ordering data BD2 busbar trunking system Busbar trunking units, with clamp terminal, tap-off points on both sides Rated current 160 A 250 A 400 A Length 1.25 m, BD2A-2-160-SB-1 BD2A-2-250-SB-1 BD2A-2-400-SB-1 distance of tap-off BVP: 260957 BVP: 261411 BVP: 261417 SV0_007 Length 2.25 m, distance of tap-off Length 3.25 m, distance of tap-off BD2A-2-160-SB-2 BVP: 260958 BD2A-2-160-SB-3 BVP: 261410 BD2A-2-250-SB-2 BVP: 261412 BD2A-2-250-SB-3 BVP: 261413 BD2A-2-400-SB-2 BVP: 261418 BD2A-2-400-SB-3 BVP: 261419 Feeding units Rated current up to 250 A up to 400 A BD2A-250-EE BVP: 261993 BD2A-400-EE BVP: 261995 Flexible junction unit, with clamp terminal Rated current up to 400 A Length 1.25 m BD2-400-R BVP: 5889 Tap-off units, molded plastic, size 1 Rated current 16 A 25 A 16 A with fuse base 3 x D01, with CEE socket outlet, 5-pole with fuse base 3-pole D02 with MCB 1-pole B16, with 2-pole RCCB 25 A/30 ma, with 2 Schuko socket outlets BD2-AK1/CEE165S14 BVP: 7230 BD2-AK1/S18 BVP: 7112 BD2-AK1/2SD163FIA161 BVP: 660870 Tap-off units, sheet steel, size 2 Rated current 32 A 63 A with MCB, 3-pole C32 with fuse base 3-pole D02 for free equipping (Pv max. 22.5 W) BD2-AK02M2/A323 BVP: 262451 BD2-AK02X/S18 BVP: 262438 BD2-AK02X/F BVP: 262457 Tap-off units, sheet steel, size 3 Rated current 125 A with fuse switchdisconnector, size 00 BD2-AK03X/GSTA00 BVP: 262496 with fuse-switch, 3-pole, IEC BD2-AK03X/FS125IEC-3 BVP: 262499 with cover-integrated disconnector, with fuse switch-disconnector, size 00 BD2-AK3/GSTZ00 BVP: 203163 Fixing material, accessories Fixing bracket Spacer bracket End flange (always required) BD2-400-BB BD2-BD BD2-400-FE BVP: 5154 BVP: 034228 BVP: 3977 Further assortment information is available in the catalogue LV70, pdf download under siemens.com/lowvoltage/infomaterial 7
Siemens AG Energy Management Mozartstraße 31 c 912 Erlangen, Germany siemens.com/busbar For more information, please contact our Customer Support Center. Tel.: +49 (0) 180 524 70 00 Fax: +49 (0) 180 524 24 71 (Charges depending on provider) E-mail: support.energy@siemens.com Article No. EMMS-B10012-00-7600 Printed in Germany 71718 WS 08155.0 Subject to change 2015 Siemens. All rights reserved. The information provided in this brochure contains descriptions or characteristics of performance which in case of actual use do not always apply as described, or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. Read the QR code with the QR code reader!