POWER RAKE PARTS CATALOG MODEL 0PR SERIAL NUMBER 000 AND ABOVE Turf Teq LLC PC0PR--0--0
Contents Part Number Page Number 0--0... Sector A... 0--0... Engine A... 0--0... Hydro Handle A... 0--0... K Transmission A... 0--0... Tractor Frame/Trans A... 0--00... Tractor Controls A... 0TR/0--0... Tractor with Diff-Loc A... 0--0... Main Frame A... 0--0... Flotation Wheel A... 0--00... Top Drive A... 0 0--0... Rotor Drive A... 0--0... Transport Release A... 0--0... Dust Shield A... K0PB/0--0... Park Brake Kit A... K0WL/0--0... Wheel-Loc Kit A... K0DL/0--0... Differential-Loc Kit A... K0LK/0--0... Broom/Edger Lift Kit A...
Torque to ft. lbs. Torque to ft. lbs. Grease. Ream Out To.00/.00 DIA. After Installation. Apply Loctite Thread Locker. Apply Anti-Seize Lubricant. Tap Threads. (x) (x) (x) (x) Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL 0 (x) 0 (x) (x) (x) (x) (x) 0 0 0 BR--0 0--0 0--0 0--0 0--00 0--0 0--0 0--00 0--0 0--00 0--0 Sector A Flat Washer / Hex Bolt / x (GR.) Washer Lock Washer / HexBolt/x Jam Nut / Lock Washer / Tap Bolt / x Nut / Lock Washer / Hex Bolt / x / Hex Bolt / x. Nut / Lock Washer / Flat Washer / HexBolt/x/ Lub Fitting / Bushing Support WA Stop WA Compression Spring Sector WA Pivot WA Frame WA Date: --0 0-0
TOP VIEW Apply Anti-Seize Lubricant. Apply Loctite Threadlocker. Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL 0 0--0 0-- 0--0 0--00 0--0 0--0 Engine A Nut / Hex Bolt / x.0 Washer Machine.0 x. x.0 Keyway / x. HexBolt.x.0(Gr.) Fine Thread Clutch A with Washer Sheave ( dia.) Honda Engine GXV0DA Date: 0--0 0-0
Apply Anti-Seize Lubricant. Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL 0 0 Hydro Handle A 0--0 0--0 0--0 0--0 0--0 0--0 0--0 0--0 Washer / USS / x -/ x.0 Lock Washer / Washer / USS /x/x.0 Carr.Bolt/x Decal -- Travel Speed Spacer T--Knob Rod WA Yoke End Handle Date: 0--0 0-0
0,, 0, Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL 0, 0 0 0-- 0-- 0-- 0-- 0-- 0-- 0-- 0-- 0-- 0-- 0--0 0--0 0--0 0--0 0--0 0--0 0--0 0--0 BR--0 0--00 0--0 0--0 K Transmission A Oil Inlet O-Ring Oil Inlet O-Ring Differential Lock Lever O-Ring Drain Plug Spring Lock Retaining Pin Hydro Release Lever Metric Spring Pin m x m Lock Nut M0 x.0 Nut / Lock Washer / HexBolt/x/ / Worm Gear Clamp Spring / dia. x. Arm WA Arm WA Rubber Hose.0 x 00 CC Reservoir Reservoir Filter Reservoir Cap Washer. x. x.0 Pully (. dia.) Fan ( dia.) K Transmission Date: 0--0 0-0
(Ref.) Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL 0 Tractor Frame/Trans A 0 Apply Loctite Thread Locker If needed install # washer (as many as required after # v-belt has been installed and tightened.) Tighten # carr. bolt after # v-belt has been installed and tightened. 0 0--0 0-- 0-- 0-- 0--0 0--0 0--00 0--0 0--0 0--0 0--0 Hex Bolt / x -/ Carr.Bolt/x Mount Lock Nut / Nut / Washer / SAE Lock Washer / Hex Bolt / x Hex Bolt / x Hex Bolt / x -/ Hex Bolt / x Hex Bolt / x / Fine Thread Link Engine A V-Belt (A--) Stiffener LH Stiffener RH Handlebar WA K Transmission A Date: --0 0-0
0 (Supplied with Throttle Cable item # ) 0-- 0--0 0-- 0-- 0-- 0--0 0--0 0-- 0-- 0--0 0--0 0-- 0--0 0--00 0--0 0--0 0--0 0-- 0--000 0--0 0--0 0--00 0--0 0--0 0--0 0--0 0--0 0--0 0--0 0--0 Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL 0 Tractor Controls A 0 0 0 0 0 0 0 0 Clutch Cable Spring Hose Clamp -- Screw Lock Nut / Nut / Lock Washer / Washer / SAE. x. x.0 Hex Bolt / x -/ Hex Bolt / x -/ Carr.Bolt/x/ Hex Bolt / x Turf Teq Super Pivot Decal Decal -- Throttle Decal -- Warning Hairpin.0 x. Self Tapping Hex Screw / x / Gas Cap Nut #0 Lock Washer #0 Washer #0 SAE. x. x.0 Pan Head Machine Screw #0 x / Hydro Handle A Throttle Control Handle Throttle Control Lever A Bracket RH Link WA ClevisPin/x Bracket LH E-clip (/ shaft) Plate Decal -- Blade Control Decal -- Swing Release Handle Grip Trigger WA Decal -- Forward / Reverse Clutch Handle WA Control Cable A Hold Down WA Fuel Tank A Fuel Hose Tractor Frame/Trans. A Date:--0 0-00
0 (Not Shown) ForAssemblyReferto Page, Differential-Loc Kit A Apply Anti-Seize Lubricant. Revisions /0 JRD MODEL 0 Diff-Loc Control Arm Note: Remove Spring TOP VIEW Transmission & Wheel A Notes: Includes Diff-Loc Kit. Does Not Include Wheel-Loc Kit. All hardware is Grade, plated and course thread unless otherwise specified. 0 0-- 0-- 0--0 0-- 0-- 0--0 0-- 0-- 0--0 0--0 0--0 0--0 0--0 0--0 0--0 0--0 0--00 Tractor with Diff-Loc A Hex Bolt / x / Key/x. Cotter Pin / x -/ Cotter Pin / x / E-Clip Lug Nut / Fine Thread Washer Machine Washer SAE Washer / SAE Lock Washer / Shield Spacer Wheel Hub K0DL Diff-Loc Kit Spacer Handle Tire & Rim A Link WA Tractor Controls A Date: 0--0 0TR/0-0
0 Tractor Tube Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL 0PR 0 AR AR AR 0-- 0-- 0-- 0--0 0--0 0--0 0--0 Main Frame A Warning Decal -- Moving Parts Warning Decal -- Rotating Teeth Turf Teq Power Rake Decal Hex Head Capscrew /--UNC x -/ Long Lock Washer / Hex Head Capscrew Serrated Flange /--UNC x / Long Hex Nut /--UNC Lock Washer / Hex Head Capscrew /--UNC x / Long Drive Enclosure Access Cover Drive Enclosure End Plate LH End Plate RH Main Frame Date: 0--0 0-0
Main Frame 0 Includes #. 0 0-- 0-- 0--0 0--0 0--0 0--00 0--0 0--0 0--0 Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL 0PR Flotation Wheel A 0 Nylon Lock Hex Nut /--UNC Hex Head Capscrew /--UNC x -/ Long Cotter Pin / Dia. x -/ Long Flat Washer / SAE Hex Nut /--UNC Lock Washer / Round Lock Pin w/tab / Dia. x -/ Long Depth Cam Wheel/Tire -- Black Smooth Tire /.00-- Caster Fork Shoulder Bolt / Dia. x / Long Shoulder /--UNC Bushing OD x / ID x / Long Wheel Frame WA Date: 0--0 0-0
0 End Plate Right Hand Main Frame 0 Tractor Pulley Tension belt so spring length is End Plate -/ from end to end. Left Hand Includes #. Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL 0PR 0 0 0 0 AR AR AR AR 0--0 0-- 0-- 0--0 0--0 0--0 0--0 0--0 0--00 0--0 0--0 0--0 0--0 0--0 0--0 0--0 0--0 Top Drive A Shield Knob Lock Washer / Hex Nut /--UNC Hex Head Capscrew /--UNC x -/ Long Flat Washer / Serrated Flange Nut /--0UNC Hex Head Capscrew /--0UNC x Long Hex Head Capscrew /--UNC x -/ Long Hex Head Capscrew /--UNC x -/ Long Set Screw /--0UNC x / Long Nylon Lock Hex Nut /--UNC Carriage Capscrew /--UNC x Long Hex Nut /--UNC Lock Washer / Hex Head Capscrew /--UNC x -/ Long Flat Washer / Drive Belt Shield VBelt,B Idler Arm Spring Spring Tension Lever Idler Pulley AB Combo / Bore x OD Idler Arm Slide Belleville Disc Spring / OD x.0 ID Idler Pulley, Flat / Bore x -/ OD Spring Idler Arm Drive Pulley V-Belt Shield, Belt Underside Gearbox Mounting Plate Key mm Sq. x 0mm Long Gearbox A, 0, Ratio.-- Date: --0 0-00 0
,, End Plate Right Hand Includes #0. Includes #., Includes s #, #, #. Main Frame, 0 Includes s #, #, #, #, and #. Includes s # and #. Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL 0PR,, End Plate Left Hand 0 0 AR 0-- 0-- 0--0 0--0 0--0 0--0 0--0 0--00 0--0 0--0 0--0 0--0 0--0 0--0 0--0 0--0 0--0 0--00 0--0 0--0 0--0 0--0 0--0 Rotor Drive A AR AR Set Screw /--UNC x / Long Set Screw /--0UNC x / Long Hex Head Capscrew /--0UNC x -/ Long Lock washer / Hex Head Capscrew /--UNC x -/ Long Lock Washer / Lube Fitting Master Link Chain #0 Drive Chain #0 Hex Head Capscrew M--. x 0mm Long Flat Washer, Sprocket Keeper Drive Sprocket #0 Tooth mm Bore Bushing QD Driven Sprocket #0 Tooth Sprocket A Spacer Bushing -/ OD x / Wall x / Wide Spacer Bushing -/ OD x / Wall x/wide Key / Sq. x Long Rotor Tooth AR00 Steel Carbide Tooth Rotor With AR00 Steel Replaceable Teeth Rotor With Carbide Teeth Bearing Insert Only Flange Only Rotor Bearing A Key mm Sq. x 0mm Long Gearbox A, 0, Ratio.-- Date: --0 0-0
Tractor Handle End Plate Right Hand Main Frame End Plate Left Hand Bolt Engine Mount 0--0 0-- 0--0 0--0 0--0 0-- 0-- 0-- 0-- 0--0 0-- 0-- 0-- Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL 0PR Transport Release A 0 Release Cable Hanger Hex Nut /--UNC Hex Head Capscrew /--UNC x -/ Long Flat Washer / Nylon Lock Hex Nut /--0UNC Hex Head Capscrew /--0UNC x / Long Transport Release Spring Transport Latch Transport Release Mount Hex Bolt / x / Bolt / x / Spring Grip Trigger Mount Trigger Assembly Cable Release Complete Cable Assembly and Latch (includes,, & ) Date: --0 0-0
End Plate Right Hand Main Frame End Plate Left Hand Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL 0PR 0--0 0--0 Dust Shield A Hex Head Capscrew /--UNC x Long Lock Washer / Hex Head Capscrew /--0UNC x long Lock Washer / Dust Shield Strike Bar Weldment Dust Shield Date: --0 0-0
Optional Equipment Apply Anti-Seize Lubricant. Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL 0 0--0 0--00 0--0 0--00 0--0 0--0 Park Brake Kit A Decal Plate Cotter Pin / x / Nut / Lock Washer / HexBolt/x Base WA Handle Grip Lever WA Date: 0--0 K0PB/0-0
NOTE: The longest threaded rod on # Wheel-Loc Hub, goes through this hole on # Plate WA. 0 0 Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL 0 Optional Equipment K Transmission (REF.) TOP VIEW 0 0--00 0-- 0-- 0--0 0-- 0--0 0-- 0-- 0--0 0--0 0--0 0--0 0--0 0--0 0--0 0--0 Wheel-Loc Kit A Bushingx.x Key/x. E--Clip Washer Machine x.x.0 Washer SAE Lock Washer / Washer / Machine /x/x.0 Jam Nut / Fine Thread Lug Nut / Fine Thread Spacer Spring C-- Engagement WA Spacer Wheel Engagement Hub WA Plate WA Spacer Wheel-Loc Hub Date: 0--0 K0WL/0-0
0 Install nut so there is / gap between 0 and. Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL 0 0 Optional Equipment 0 Note: s,,,,,, and are standard on all machines and are not part of the optional kit. 0 0 0--0 0--0 0--0 0-- 0-- 0--0 0--0 0--0 0--0 0--0 0--0 0--0 0--0 0--0 Differential-Loc Kit A Lock Nut / Jam Nut / Nut / Lock Washer / Washer / Machine /x/x.0 Hex Tap Bolt / x Nut / Lock Washer / Washer / SAE Nut / Lock Washer / Washer / SAE Hex Bolt / x. Carr Bolt / x Hex Bolt / x Eyebolt / x Spring Spacer Decal Mount WA Arm WA Bushing Decal Arm WA Date:--0 K0DL/0-0
(Ref. only) 0 Supplied With Lift Arm ( #). Optional Equipment Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL 0 Broom/Edger Lift Kit A 0 0-- 0-- 0-- 0-- 0--0 0--0 0--00 Cotter Pin / x -/ Cotter Pin / x / Washer / SAE. x. x.0 Nut / Lock Washer / Washer / SAE Hex Bolt / x End Plug Lift Arm WA Lift Arm A Date: 0--0 K0LK/0-0