atalog /US Index Vacuum ups Product Selection Technical Lifting orces, up iameters, Material Specifications 6-9 P lat Precision molded single li

Similar documents
Vacuum Cups. Styles. Cup material Nitrile Silicon Urethane Material code NBR SI U Operating temperature ( C) -60 to ±5 55 ±5 55 ±5

Vacuum Technology. Catalogue PDE2507TCUK-ab. Convum

High Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation

Vacuum Pad: Large Size Bellows Type

1 Cylinder. 1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke. 2 - Cylinder Options. Cylinder Accessories

Section 6 Feet & Casters

Vacuum Cups & Fittings

4-Way, 5-Port, 2 & 3-Position Solenoid and Remote Pilot 1/2" & 3/4" Ports. Technical & Service Data. Pneumatic

Couplings - Quick Disconnect

Isys Micro Series. Air Control Valves. Section E

ADEX Series Air Control Valves A00.01 Cv M3 Port A05.18 Cv M5 Port A12.47 Cv 1/8" Port zpv02 A B C D E F G H. Section H

Tension Brakes/High Heat Capacity

PVL Series. Solenoid & Remote Pilot Operated 1/8" & 1/4" Valves. Section C. C59

VACUUM CUPS 2 SECTION 2 VACUUM CUPS 2: EDCO USA.

Tension Brakes/Air Cooled

ADEX Series. Air Control Valves. Section D

Vacuum Pad: Ball Joint Type

9 mm shortened. 11 mm shortened. Vacuum Pad. ZP3 Series. ø1.5 ø2 ø3.5 ø4 ø6 ø8 ø10 ø13 ø16. Overall length is shortened. Space-saving.

DIST. AUTORIZADO. Design Features

Victory A-Series Actuators PRODUCT CATALOG V55A V43A FG1 V32A FG2 V26A

Table of Contents. Quick Coupling Products

Pneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options

Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting air t

Piston Accumulators Series Catalog HY /US

atalog /USA otes ontrol omponents 2 Parker Hannifin orporation ivision

PNEUMATIC RACK AND PINION ACTUATORS. Advanced torque to size ratio

PVL Series Solenoid & Remote Pilot Operated 1/8" & 1/4" Valves zpv06

Piston Accumulators Series Catalog HY /US Page

Instrument Ball Valves

TrueSeal Thermoplastic Push-In Fittings

High Pressure Valves, Fittings and Tubing Pressures to 65,000 psi

High Pressure Valves, Fittings and Tubing Pressures to 65,000 psi (4,500 bar)

Supplying All Your Needs for Vacuum Cups, Grippers, Seals and Rollers

Needle Valves. Needle Valves Part Matrix. Flow Coefficient (C v ) belgas.net 1

VACUUM PADS CONTENTS ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS. Caution VACUUM PADS

High Pressure Valves, Fittings and Tubing Pressures to 65,000 psi

Ultra High Pressure Valves, Fittings and Tubing Pressures to 152,000 psi

Medium Pressure Valves, Fittings and Tubing Pressures to 21,000 psi

TrueSeal Fittings. Applications: Markets: Food Potable Water Chemical Filtration. Specifications:

Piston Accumulators Series Catalog /USA Page

Pneumatic Quick Couplings

Standard suction cups

FT SERIES. FT Series Linear Actuators

hydraulic power clamps

Diagnostic, Orifice, Bleed Adapters and Specialty Fittings

Thermoplastik- & Fluorpolymerprodukte

Quick oupling Products Introduction The Parker Hannifin offers a full range of precision quick action couplings for use in the process, power and inst

High Pressure Valves, Fittings and Tubing Pressures to 65,000 psi

Quick Couplings. Section F

Suction Pads for Plastic Films and Paper

N Series. High Speed Inline Poppet Valves 2 & 3-Way. Section D

Piston Seal CQ Profile

AkroBins. Storage Bins

Piston Seal OE Profile

Accessory Selection Guide

Press Section Overview

CG Series Visual Index

Stainless steel piston rod. Low-friction piston rod seal. ouble and single-acting versions Smooth stainless steel cylinder tube. The Parker Pneumatic

Valvair Manual Spool Valves

hydraulic power clamps

Thermoplastic Couplings

Features. Specification. Model. Acting type. Tube I.D. (mm) Port size M3 0.5 M Medium. Ambient temperature

RC-Series DUO Cylinders, Single-Acting. The Industry Standard General Purpose Cylinder.

Tutorial, Introduction & Benefits PTFE Hose Assembly & Fittings Nomenclature SAE 100R14A Hose

Medium Pressure Valves, Fittings and Tubing Pressures to 21,000 22,500 psi (1,500 (1,550 bar)

Power Take-Off Clutches

Valve Products. Viking Lite Series Valves. Operating information. Minimum operating pressure, PSIG (bar) Materials. Recommended air quality for valves

Maximum Working Pressure. Code Description Brass

LIGHTWEIGHT + COMPACT. Rotary Union Solutions SPS. Series NPT CONNECTION SIZE OPTIONS

Maximum speed ratings are based on light loads and reflective of bore sizes: 1/2 =6000 RPM, 5/8 =5000 RPM, 3/4 =4500 RPM, and 1 =3500 RPM

Female - Swivel. 45 Elbow. 45 Elbow (5000 psi) 16E78 B-96 16B78 B /2 Elbow. 60 Elbow 16N78 B Elbow. Female - Swivel Long 1C978 B-101

SMD2. Compact cylinder. Space saving structure 6, 10, 16 20, 25, 32. Simple square design. Switch integrated. Easy centering. Precise installation

Light Coupling Series

Viking Lite Series Valves Air Control Valves

Flat Suction Pads (Oval)

,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents

Hand Crank & Brake Assembly. 12V 1 /3 hp Motor. See Page 128 for Reel Dimensions & Sizes. (lengths over 100' are spliced)

BVA Limited Lifetime Warranty

atalog /US asic eatures llen ey Sensor Locking lip ircuit ressure /12 5/32" Tube Instant onnections Driving ressure U xhaust ack ressure Thresho

Air Tube Disc Clutches and Brakes

Quick Coupling Products

Valve Products. B Series Valve

LX Hand Pump Oil. hand pumps - anti-sludge, anti-rust additives. HF oil - good low temperature performance. Dimensions (in) Model No. A-64 A-65 1.

High-Flow Stainless Tubes. Standard Tubes BRASS 18 LONG STAINLESS STEEL 18 LONG H11. All stainless construction for high strength and durability

Minimal Fitting Series

Tube Applicable for nylon, soft nylon and polyurethane tubing.

L & S Series Linear Slides

Table of Contents. Numatics 2009 Rev. 1/09

VCR. Metal Gasket Face Seal Fittings. 1/16 to 1 in. and 6 to 18 mm sizes. High-purity stainless steels

MK Series High Performance Butterfly Submittal/Technical Data

Pneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube

Isys Micro Series. Valve Products. Operating information. Material specifications. Pilot configuration

Tube Fitting Brass Series

NEN Series NFPA Aluminum Cylinders

SP30 - BJ - FCF50 - PU

3-Way Mixing and Sequencing Globe Valves, Flared (5/8 in. O.D.) with Electric, Hydraulic, and Pneumatic Actuators

Valve Products Viking Lite Valves

NAAMS Standards Compliant Power Clamp Cylinder ø50, ø63

Combination Clutch/Brake

Mechanical Style Pressure Switch. Specifications

Transcription:

Vacuum ups Section 3 Parker annifin orporation ivision

atalog 0802-2/US Index Vacuum ups Product Selection Technical Lifting orces, up iameters, Material Specifications 6-9 P lat Precision molded single lip flat cup for smooth or slightly 10-27 curved surfaces. Low profile design makes flat pads ideal for fast response. up Sizes: 1mm to 200mm P5V-S lat Precision molded double lip flat cup for slightly curved 28-31 surfaces. ouble lip for additional security. If outside lip bends and looses its seal, the inner lip remains sealed. Outer ribs prevent the cup lip from being cut. up Sizes: 50mm to 300mm P ellows Versatile bellows cup design provides a flexible sealing lip for 32-45 products with irregular, smooth, curved surfaces, and flexible products. up Sizes: 10mm to 150mm PJ Short ellows Versatile bellows cup design provides a flexible sealing lip for 46-61 products with irregular, smooth, curved surfaces, and slightly flexible products. Shorter stroke provides fast response. up Sizes: 6mm to 80mm P Multiple ellows Versatile bellows cup design provides a flexible sealing lip for 62-73 products with irregular, smooth, or curved surfaces. 2 1/2 bellows design minimizes contact pressure applied to products. up Sizes: 5mm to 90mm PK utomotive Versatile cup design with grooves extending to the outer 74-83 diameter and different profiles for flexible products with smooth, oily surfaces. up Sizes: 60mm to 110mm 4 Parker annifin orporation ivision

atalog 0802-2/US Index Vacuum ups Product Selection PU lat Swivel 30 swivel single lip flat cup for smooth surfaces, slightly 84-95 curved surfaces, and flexible products. Rigid stem or level compensator provides good stability for horizontal lift. up Sizes: 10mm to 200mm PO Vacuum rooves nti-slip flat cup with grooves extending to the outer diameter 96-103 to increase vacuum flow area. Increased friction resists slipping of product during transfer. up Sizes: 20mm to 40mm P Ring ups Some of the more popular pads for the Industry. igh 104-107 temperature and soft durometer make these pads gentle and durable. up Sizes: 20mm to 46mm P Sponge Sponge cup for workpieces having irregular or uneven 108-109 surfaces. The 20-durometer-sponge material conforms to the product allowing the desired vacuum level to be achieved. up Sizes: 4mm to 15mm P oil, Paper, ilm These cups have an ultra thin edge that creates the vacuum 110-119 seal by conforming to the shape of the product. The complete foot pattern to the center of the cup prevents the vacuum from deforming or puckering thin, flexible products. up Sizes: 10mm to 50mm dapters & Screws SPP adapter fittings and cup screws. 120 5 Parker annifin orporation ivision

atalog 0802-2/US up Selection Selecting the Proper Vacuum up UTION Selecting the type of vacuum cup, material, and size suitable for an application is important to the overall vacuum system. alculating the forces involved for each application is recommended to determine the vacuum cup size. It should be noted that these calculations are basic theoretical guidelines and each application must be tested for actual results. With all vacuum applications, certain practical assumptions concerning cup materials, environmental conditions, and product characteristics to name a few, may not be consistent with the performance. gain, the user should determine the efficiency, performance, and safety factor of the cup selection. alculating Pad iameter and orces Mass The term mass is a quantity of matter and its ability to resist motion when acted on by an external force. The magnitude of an object is represented as a certain number of kilograms (kg) and is symbolized as m. The easiest way to determine the mass of an object is to measure the weight with a scale within the earth s gravitational field (ag = 9.81m/sec 2 ). Likewise, outside of any gravitational field, a mass could potentially be weightless. orces or vacuum applications, force is a vector quantity in a defined direction either horizontal or vertical. The standard international unit of force is measured in Newtons (N) which is the equivalent of (kgm/sec 2 ). The force can be calculated by measuring the effect of a change in acceleration on a mass. Newtons Law: (N) = mass(kg) x ag(m/sec 2 ) onsider an object with a mass of 10kg. The gravitational force on this object would be: (N) = 10kg x 9.81m/sec 2 = 98.1 N cceleration cceleration is the change in velocity of a moving object. cceleration is a vector, a directional quantity expressed in units of meters per second squared (m/sec 2 ) and symbolized as a. To explain the magnitude of acceleration consider an object with a change in velocity of 2 meters per second (m/sec) over a 4 second time frame. The acceleration can be calculated with: a = velocity a = 6m/sec a = 3m/sec 2 time 2 sec This is considered an average acceleration. oefficient of riction ertain values for coefficient of friction should be taken into consideration when calculating the combined forces in motion. ctual values between suction cups and surfaces are difficult to determine. Therefore, coefficient of friction values from published charts, should be used as a reference to adjust the safety factors accordingly. Vacuum ups Technical Information Lifting orces When calculating lifting forces, safety factors of 2 for horizontal lifts and 4 for vertical lifts are minimum values. pplications with irregular shapes, difficult surfaces, and ackward motions will require increased safety factors. : orizontal Lift V: Vertical Lift orizontal Lifting orce pply Newtons Law to calculate the force on a 10kg mass with a change in acceleration of 3m/sec 2 and a safety factor of 2. (N) = mass(kg) x (ag+ a) x S (N) = 10kg x (9.81m/sec 2 +3m/sec 2 ) x 2 = 256.2 N 10kg 10kg 3m/sec 2 Vertical Lifting orce pply Newtons Law to calculate the force on a 10kg mass with a dry surface, a change in acceleration of 3m/sec 2 and a safety factor of 4. V(N) = mass(kg) x (ag+ a) x Sv V(N) = 10kg x (9.81m/sec 2 +3m/sec 2 ) x 4 V = 512.4 N V 10kg 3m/sec 2 ombined Vertical Lift and orizontal Motion alculate the force on a 10kg mass with a dry surface, a change in acceleration of 3m/sec 2, and a change in travel acceleration of 2m/sec 2. M(N) = V 2 + 2 M(N) = [(10kg x 2m/sec 2 ) x 4] 2 + [10kg x (9.81m/sec 2 + 3m/sec 2 ) x 2] 2 M(N) = (80kgm/sec 2 ) 2 + [256kgm/sec 2 ] 2 M(N) = 6400kgm/sec 2 + 65,536kgm/sec 2 M = 268.2 N 3m/sec 2 2m/sec 2 6 Parker annifin orporation ivision

atalog 0802-2/US Lift apacity nalyze the orces Using the previous examples, consider an application where 4 cups have been selected to transfer the product. Take the orizontal Lifting orce () of 256.2 N and divide by the number of cups (4) to obtain the individual force for each cup. 256.2 (N) = 64.05 N / up 4 Refering to the chart below, at 60% vacuum, select a force greater than 64.05 N. The appropriate selection is a 40mm diameter cup which has a theoretical lifting force of 76.9 N. The same calculation can be applied to the Vertical Lifting orce and the orces in Motion examples to determine the cup diameter. To convert Pounds (Lbf) to Newton (N), multiply Lbf x 4.4. Vacuum ups Technical Information Theoretical Lifting orce Per up lbf (N) alculate the iameter of the up alculate the cup diameter for horizontal lift at 60% of full vacuum using the information from the previous page. m (a g + a) x S (mm) = iameter of up = 35.7 m (kg) = Mass Pv x n ag = 9.81m/sec 2 a = Motion cceleration S = Safety actor 10 (9.81 + 3) x 2 Pv (kpa) = Operating Vacuum Pressure = 35.7 61 x 4 n = Number of ups = 36.58 mm Refering to the chart below, at 60% vacuum, select a cup diameter equal to or greater than 37mm. The appropriate selection is a 40mm diameter cup which has a theoretical lifting force of 76.9 N. Vacuum Level up 3 in hg 6 in hg 9 in hg 12in hg 15 in hg 18 in hg 21 in hg 24 in hg 27 in hg -1.5 PSI -3 PSI -4.5 PSI -6 PSI -7.5 PSI -9 PSI -10.5 PSI -12 PSI -13.5 PSI iameter rea 10.2 kpa 20.3 kpa 30.5 kpa 40.6 kpa 50.8 kpa 61 kpa 71.1 kpa 81.3 kpa 91.4 kpa mm cm 2 10% 20% 30% 40% 50% 60% 70% 80% 90% 1 0.01 0.002 (0.01) 0.004 (0.02) 0.004 (0.02) 0.007 (0.03) 0.009 (0.04) 0.011 (0.05) 0.013 (0.06) 0.016 (0.07) 0.016 (0.07) 2 0.03 0.007 (0.03) 0.013 (0.06) 0.022 (0.10) 0.029 (0.13) 0.036 (0.16) 0.043 (0.19) 0.049 (0.22) 0.056 (0.25) 0.063 (0.28) 3.5 0.10 0.022 (0.10) 0.045 (0.20) 0.065 (0.29) 0.088 (0.39) 0.110 (0.49) 0.133 (0.59) 0.155 (0.69) 0.175 (0.78) 0.198 (0.88) 5 0.20 0.045 (0.20) 0.090 (0.40) 0.135 (0.60) 0.180 (0.80) 0.225 (1.00) 0.270 (1.20) 0.315 (1.40) 0.360 (1.60) 0.405 (1.80) 6 0.28 0.065 (0.29) 0.130 (0.58) 0.196 (0.87) 0.270 (1.20) 0.315 (1.40) 0.382 (1.70) 0.450 (2.00) 0.517 (2.30) 0.585 (2.60) 7 0.39 0.088 (0.39) 0.175 (0.78) 0.265 (1.18) 0.360 (1.60) 0.450 (2.00) 0.540 (2.40) 0.607 (2.70) 0.697 (3.10) 0.787 (3.50) 8 0.50 0.117 (0.52) 0.229 (1.02) 0.346 (1.54) 0.450 (2.00) 0.585 (2.60) 0.697 (3.10) 0.809 (3.60) 0.922 (4.10) 1.034 (4.60) 10 0.79 0.180 (0.80) 0.360 (1.60) 0.540 (2.40) 0.719 (3.20) 0.899 (4.00) 1.079 (4.80) 1.259 (5.60) 1.439 (6.40) 1.619 (7.20) 15 1.77 0.404 (1.80) 0.809 (3.60) 1.216 (5.41) 1.619 (7.20) 2.023 (9.00) 2.428 (10.8) 2.833 (12.6) 2.237 (14.4) 3.642 (16.2) 18 2.55 0.585 (2.60) 1.169 (5.20) 1.751 (7.79) 2.338 (10.4) 2.923 (13.0) 3.507 (15.6) 4.069 (18.1) 4.676 (20.8) 5.238 (23.3) 20 3.14 0.719 1.439 2.158 2.878 3.597 4.316 5.036 5.755 6.474 (3.20) (6.40) (9.60) (12.8) (16.0) (19.2) (22.4) (25.6) (28.8) 25 4.91 1.124 2.248 3.372 4.496 5.620 6.744 7.868 8.992 10.116 (5.00) (10.0) (15.0) (20.0) (25.0) (30.0) (35.0) (40.0) (45.0) 30 7.07 1.619 (7.20) 3.237 (14.4) 4.856 (21.6) 6.474 (28.8) 8.093 (36.0) 9.712 (43.2) 11.330 (50.4) 12.949 (57.6) 14.568 (64.8) 35 9.62 2.203 (9.80) 4.406 (19.6) 5.598 (29.4) 8.813 (39.2) 11.016 (49.0) 13.241 (58.9) 15.422 (68.6) 17.648 (78.5) 19.828 (88.2) 40 12.6 2.900 (12.9) 5.755 (25.6) 8.655 (38.5) 11.510 (51.2) 14.388 (64.0) 17.288 (76.9) 20.143 (89.6) 23.155 (103) 25.853 (115) 50 19.6 4.519 (20.1) 8.992 (40.0) 13.511 (60.1) 17.985 (80.0) 22.481 (100) 26.977 (120) 31.473 (140) 35.969 (160) 40.466 (180) 60 28.3 6.497 (28.9) 12.949 (57.6) 19.446 (86.5) 25.853 (115) 32.372 (144) 38.892 (173) 45.411 (202) 51.931 (231) 58.226 (259) 75 44.2 10.161 (45.2) 20.233 (90.0) 30.349 (135) 40.466 (180) 50.582 (225) 60.698 (270) 70.815 (315) 80.931 (360) 91.048 (405) 80 50.3 11.555 (51.4) 22.931 (102) 34.621 (154) 46.086 (205) 57.551 (256) 69.241 (308) 80.706 (359) 92.172 (410) 103.637 (461) 90 63.6 14.635 (65.1) 29.225 (130) 43.838 (195) 58.226 (259) 72.838 (324) 87.451 (389) 102.063 (454) 116.676 (519) 131.064 (583) 95 70.9 16.299 (72.5) 32.372 (144) 48.784 (217) 64.970 (289) 81.156 (361) 97.567 (434) 113.753 (506) 129.940 (578) 146.126 (650) 110 95.0 21.851 (97.2) 43.613 (194) 65.419 (291) 87.001 (387) 108.808 (484) 130.614 (581) 152.421 (678) 174.227 (775) 195.809 (871) 120 113.1 26.078 51.706 77.784 103.637 129.490 155.568 181.421 207.274 233.127 (116) (230) (346) (461) (576) (692) (807) (922) (1037) 150 176.7 40.690 80.931 121.622 161.862 202.328 243.019 283.259 323.950 364.191 (181) (360) (541) (720) (900) (1081) (1260) (1441) (1620) 200 314.2 72.164 (321) 143.878 (640) 216.041 (961) 287.531 (1279) 359.919 (1601) 432.083 (1922) 503.797 (2241) 575.961 (2562) 647.449 (2880) 7 Parker annifin orporation ivision

atalog 0802-2/US Lift apacities Specifications up material should be considered for temperature resistance, chemical resistance, oil resistance, abrasion resistance, markless properties, and electrical properties. Suction up Material Vacuum ups Technical Information NR NR R SI SI U KM S Z Nitrile Silicone louro Silicone Nitrile hloroprene Silicone Urethane Markless S* S* Rubber igh Temp Operating -20-30 -30-60 -60-30 -10-50 -10 Temperature ( ) to +120 to +120 to +140 to +250 to +250 to +120 to +230 to +300 to +230 lack / lack / lack / lack / olor lack reen White lue rey lue ot Red ot White ot Yellow ot ardness, 55 ±5 70 ±5 55 ±5 55 ±5 55 ±5 55 ±5 70 ±5 55 ±5 70 ±5 Shore ( Sh) lectrical 800 800 (Ωm) to 1000 to 1000 Wear Tear Strength ging Ozone asoline Oil cid lkali hemical Mechanical = excellent; = very good; = good; = medium; = poor; = not recommended * S: lectric Static issipative Material 8 Parker annifin orporation ivision

atalog 0802-2/US Symbols Index of Vacuum omponent Symbols These Symbols will be located in each cup section as a guide for cup usage. Symbol Suction up Icons escription lat Surface, Thin Section lat Surface, ny Section Soft Porous Material, Thin Section Soft Porous Material, ny Section Slightly owed Surface, Thin Section Slightly owed Surface, ny Section owed Surface, Thin Section owed Surface, ny Section Soft Material Metal Sheet andling orrugated Sheet andling Vacuum ups Technical Information Symbol Suction up Icons escription ifferences In eights and Levels Vertical Lift Not or Vertical Lift Rough and / or brasive Surfaces Thin or Narrow Item andling Oil Resistant igh Lifting orce Vertical Lifting orce orizontal Lifting orce 9 Parker annifin orporation ivision

atalog 0802-2/US eatures P lat Vacuum ups P Series Vacuum ups Precision molded single lip flat cup for smooth or slightly curved surfaces. PTM Series Male Thread onnector Simple male connection for low profile positions secured to a plate or bracket. UN, NPT,, metric threads. Internal hex for easy assembly. itting Material: luminum. PT Series emale Thread onnector Simple female connection for low profile positions secured to a plate or bracket. NPS, threads. Internal hex for easy assembly. itting Material: luminum. Vacuum ups P Vacuum ups eatures Universal lat esign for Most Smooth Surface pplications Stable Vertical / orizontal Lift Strong Low Profile esign for ast Response Needed for Short ycles 1mm to 200mm iameters ottom leats on 60 to 200mm pplications xceptional for any smooth flat or surface that will benefit from stability and fast response of the cup design. This is a multi-versatile and multi-industry cup. Typical applications could be chip mounting, electrical components, semiconductor chips, glass, injection mold, sheet metal, press transfer, fixtures, woodworking. PTK Series arbed ulkhead Top stem connectors secured with jam nuts and allow tubing connections at the top side. Nickel plated brass materials. PYK Series 90 arbed dapter Side stem connectors allow you to secure the stem with a bolt thru a plate or L bracket to allow the tube connection from the side port. Nickel plated brass materials. PTYS Series ulkhead Level ompensator 303 stainless steel construction secured with jam nuts. Spring biased compensators can absorb impacts of down-strokes and adjust for different levels of pick up points. 303 stainless corrosion resistant materials with drymet bushings increases the strength and life. 10 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information Model Number Index (ups Only) (old Items are Stocked) Specifications Suction up Material up iameter (mm) 1 (1) 25 (25) 1.5 (1.5) 30 (30) 2 (2) 35 (35) 3.5 (3.5) 40 (40) 5 (5) 50 (50) 6 (6) 60 (60) 8 (8) 80 (80) 10 (10) 95 (95) 15* (15) 120 (120) 15** (15) 150 (150) 20* (20) 200 (200) 20** (20) * vailable for PTK & PYK up ssemblies Only. ** vailable for PTM, PT & PTYS up ssemblies Only. Vacuum ups P Vacuum ups P - 2 - NR up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) U Urethane NR Nitrile S R hloroprene SI Silicone S KM louro Rubber S igh Temp Z Markless Note: 60 thru 200mm cups have cup cleats. NR NR R SI SI U KM S Z Nitrile Silicone louro Silicone Nitrile hloroprene Silicone Urethane Markless S* S* Rubber igh Temp Operating -20-30 -30-60 -60-30 -10-50 -10 Temperature ( ) to +120 to +120 to +140 to +250 to +250 to +120 to +230 to +300 to +230 lack / lack / lack / lack / olor lack reen White lue rey lue ot Red ot White ot Yellow ot ardness, 55 ±5 70 ±5 55 ±5 55 ±5 55 ±5 55 ±5 70 ±5 55 ±5 70 ±5 Shore ( Sh) lectrical 800 800 (Ωm) to 1000 to 1000 Wear Tear Strength ging Ozone asoline Oil cid lkali hemical Mechanical = excellent; = very good; = good; = medium; = poor; = not recommended * S: lectric Static issipative Material 11 Parker annifin orporation ivision

atalog 0802-2/US pplications & Technical ata pplication uide lat - Smooth Surface Main ata for lat P ups Volume V Vacuum ups P Vacuum ups up eflection S Radius Lifting orce @60% (N) up Radius Model up iameter rea Volume (V) eflection (S) (R) Number cm 2 Liters mm mm P-1-*.04 (1) 0.008 0.00000015 0.05 0.025 0.1 1.6 P-1.5-*.06 (1.5) 0.01 0.00000053 0.10 0.05 0.1 3.5 P-2-*.08 (2) 0.03 0.0000007 0.19 0.09 0.1 1.75 P-3.5-*.12 (3) 0.10 0.000002 0.59 0.29 0.2 2.0 P-5-*.20 (5) 0.20 0.000005 1.20 0.6 0.5 3.5 P-6-*.24 (6) 0.28 0.000008 1.70 0.85 1.0 4.0 P-8-*.31 (8) 0.50 0.00003 3.10 1.5 1.4 5.0 P-10-*.39 (10) 0.79 0.00007 4.80 2.4 1.5 6.0 P-15-*.59 (15) 1.77 0.0004 10.8 5.4 1.9 6.0 P-15-*.59 (15) 1.77 0.0004 10.8 5.4 1.9 6.0 P-20-*.79 (20) 3.14 0.0008 19.2 9.6 2.3 9.0 P-20-*.79 (20) 3.14 0.0008 19.2 9.6 2.3 13.0 P-25-*.98 (25) 4.91 0.0013 30.0 15.0 3.0 17.5 P-30-* 1.18 (30) 7.07 0.0018 43.2 21.6 2.0 26 P-35-* 1.38 (35) 9.62 0.0026 58.9 29.5 3.0 31 P-40-* 1.57 (40) 12.60 0.004 76.9 38.5 3.5 37 P-50-* 1.97 (50) 19.60 0.007 120 60 4.0 41 P-60-* 2.36 (60) 28.30 0.0090 173 87 5.0 70 P-80-* 3.15 (80) 50.30 0.025 308 154 6.0 100 P-95-* 3.74 (95) 70.90 0.035 434 267 6.0 150 P-120-* 4.72 (120) 113.00 0.078 692 346 6.0 365 P-150-* 5.91 (150) 176.70 0.177 1081 541 9.0 380 P-200-* 7.87 (200) 314.20 0.425 1922 961 13.0 430 * up Material Ø 120/200 Only Products With Smooth Surfaces Products With Minimum lex Products That Will Not Permanently eform R 12 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions P-1 P-1.5 P-2 P-3.5 P-5 P-15 P-60 thru P-95 Model Number J J Ø Ø Ø Ø ØJ P-1-*.04 (1).03 (.8).05 (1.2).06 (1.6) P-1.5-*.06 (1.5).05 (1.2).07 (1.8).10 (2.5) P-2-*.08 (2).08 (2).05 (1.2).16 (4).16 (4).02 (.5).10 (2.5).06 (1.5).12 (3) P-3.5-*.14 (3.5).08 (2).05 (1.2).16 (4).16 (4).02 (.5).10 (2.5).06 (1.5).12 (3) P-5-*.20 (5).16 (4).06 (1.4).30 (7.5).26 (6.5).03 (.8).16 (4).08 (2).24 (6) P-6-*.24 (6).16 (4).08 (2).30 (7.5).26 (6.5).03 (.8).16 (4).08 (2).24 (6) P-8-*.31 (8).16 (4).08 (2).31 (8).28 (7).05 (1.2).16 (4).08 (2).24 (6) P-10-*.39 (10).16 (4).08 (2).33 (8.5).30 (7.5).06 (1.5).16 (4).08 (2).24 (6) P-15-*.59 (15).31 (7.8).47 (12).31 (8).07 (1.9) P-15-*.59 (15).16 (4).08 (2).35 (9).31 (8).08 (2).16 (4).08 (2).24 (6) P-20-*.79 (20).18 (4.6).43 (11).59 (15).39 (10).09 (2.3).18 (4.5) P-20-*.79 (20).24 (6).43 (11).59 (15).49 (12.5).09 (2.3).28 (7) P-25-*.98 (25).24 (6).43 (11).63 (16).55 (14).12 (3).28 (7) P-30-* 1.18 (30).24 (6).43 (11).55 (14).47 (12).08 (2).28 (7) P-35-* 1.38 (35).24 (6).43 (11).83 (21).55 (14).12 (3).28 (7) P-40-* 1.57 (40).24 (6).43 (11).94 (24).55 (14).16 (4).28 (7) P-50-* 1.97(50).31 (8).79 (20) 1.06 (27).59 (15).14 (3.5).28 (7) P-60-* 2.36 (60) M10x1.25.79 (12.5).73 (18.5).20 (5).10 (2.5) P-80-* 3.15 (80) M10x1.25.79 (12.5).81 (20.5).24 (6).10 (2.5) P-95-* 3.74 (95) M10x1.25.79 (12.5).83 (21).24 (6).10 (2.5) P-120-* 4.72 (120).55 (14).55 (14).79 (20) 1.00 (25.5).24 (6) 4xØ8.7xØ40.059 (1.5) P-150-* 5.91 (150).51(13).55 (14).79 (20) 1.28 (32.5).35 (9) 4xØ8.7xØ40.059 (1.5) P-200-* 7.87 (200).51 (13).47 (12).79 (20) 1.48 (37.5).51 (13) 4xØ8.7xØ40.059 (1.5) * up Material (Revised 10/8/04) P-120 thru P-200 Vacuum ups P Vacuum ups P-15 thru P-40 P-50 ia. Typ. 4 Places 4 olt Pattern 40mm ia. 13 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information PTM Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Mounting Thread Male Thread itting for P ups Model Number Index (old Items are Stocked) up iameter Mounting Mounting TM itting Included in Kit (mm) Thread ode Thread Part Number Min. Tube I 1 M3 M3x0.5 Male TM-1-M3.060 (1.5) 1.5 M3 M3x0.5 Male TM-1.5-M3.060 (1.5) 2, 3.5 M5 M5x0.8 Male TM-2-M5.098 (2.5) 5, 6, 8, 10, 15 Tube I.. 20, 25, 30, 35, 40 Vacuum ups PTM Vacuum up ssemblies PTM - 2 - NR - M5 up iameter (mm) 1 (1) 20 (20) 1.5 (1.5) 25 (25) 2 (2) 30 (30) 3.5 (3.5) 35 (35) 5 (5) 40 (40) 6 (6) 50 (50) 8 (8) 60 (60) 10 (10) 80 (80) 15 (15) 95 (95) (old Items are Stocked) M5 M5x0.8 Male TM-5-M5 1 1/8 SPP Male TM-5-1 N1 1/8 NPT Male TM-20-N1 1 1/8 SPP Male TM-20-1 2 1/4 SPP Male TM-20-2 M10 M10 x 1.25 Male TM-20-M10 N1 1/8 NPT Male TM-50-N1.157 (4).157 (4) 50 1 1/8 SPP Male TM-50-1.157 (4) 2 1/4 SPP Male TM-50-2 N2 1/4 NPT Male TM-60-N2 60, 80, 95 2 1/4 SPP Male TM-60-2.25 (6.35) M10 M10x1.25 Male TM-60-M10 up Material Stocked Mounting Thread NR Nitrile M3 M3 Rubber M5 M5 SI Silicone N1 1/8 NPT vailable 1 1/8 SPP (onsult actory) M10 M10 U Urethane N2 1/4 NPT NR Nitrile S 2 1/4 SPP R SI hloroprene Silicone See hart elow S KM louro Rubber S igh Temp Z Markless 14 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions PTM-1 and PTM-1.5 PTM-20 thru PTM-50 SW5 20 thru 40: 1/2" 50: 9/16" (Revised 01/10/05) M3 N1: 1/8 NPT 1: 1/8 SPP M10: 10x1.25 2: 1/4 SPP Vacuum ups PTM Vacuum up ssemblies PTM-2 thru PTM-15 M5: SW8 1: SW13 (5 thru 15 Only) PTM-60 thru PTM-95 M5:.14 (3.5) 1:.20 (.5) (5 thru 15 Only) Model Ø Number (M3) (M5) (N1 / 1) (M10 / 2) (N2) PTM-1-*-.04 (1).14 (3.6).12 (3).08 (2).003 (0.1) PTM-1.5-*-.06 (1.5).14 (4.5).12 (3).08 (2).003 (0.1) PTM-2-*-.08 (2).30 (7.5).18 (4.5).14 (3.5).20 (5) PTM-3.5-*-.14 (3.5).30 (7.5).18 (4.5).14 (3.5).20 (5) PTM-5-*-.20 (5).39 (10).18 (4.5).31 (8) See wg..31 (8) PTM-6-*-.24 (6).39 (10).18 (4.5).31 (8) See wg..31 (8) PTM-8-*-.31 (8).41 (10.5).18 (4.5).31 (8) See wg..05 (1.2) PTM-10-*-.39 (10).43 (11).18 (4.5).31 (8) See wg..06 (1.5) PTM-15-*-.59 (15).45 (11.5).18 (4.5).31 (8) See wg..08 (2) PTM-20-*-.79 (20).69 (17.5).31 (8).39 (10).20 (5).10 (2.5) PTM-25-*-.98 (25).75 (19).31 (8).39 (10).20 (5).12 (3) PTM-30-*- 1.18 (30).67 (17).31 (8).39 (10).20 (5).08 (2) PTM-35-*- 1.38 (35).75 (19).31 (8).39 (10).20 (5).12 (3) PTM-40-*- 1.57 (40).75 (19).31 (8).39 (10).20 (5).14 (3.5) PTM-50-*- 1.97 (50).79 (20).31 (8).39 (10).20 (5).16 (4) PTM-60-*- 2.36 (60).90 (23).39 (10).59 (15).28 (7).20 (5) PTM-80-*- 3.15 (80).98 (25).39 (10) 59 (15).28 (7).24 (6) PTM-95-*- 3.74 (95) 1.00 (25.5).39 (10) 59 (15).28 (7).24 (6) * up Material Thread Size 9/16" M5: M5 1: 1/8" SPP (5 thru 15 Only) N2: 1/4 NPT 2: 1/4 SPP M10: 10x1.25 15 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information PT Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. emale Thread itting for P ups Vacuum ups PT Vacuum up ssemblies up iameter (mm) 5 (5) 40 (40) 6 (6) 50 (50) 8 (8) 60 (60) 10 (10) 80 (80) 15 (15) 95 (95) 20 (20) 120 (120) 25 (25) 150 (150) 30 (30) 200 (200) 35 (35) up iameter Mounting Mounting T itting Included in Kit (mm) Thread ode Thread Part Number Min. Tube I 5, 6, 8, 10, 15 M5 M5x0.8 emale T-5-M5.157 (4) N1 1/8 NPT emale T-20-N1 20, 25, 30, 35, 40 1 1/8 SPP emale T-20-1.157 (4) 2 1/4 SPP emale T-20-2 N1 1/8 NPT emale T-50-N1 50 1 1/8 SPP emale T-50-1.157 (4) 60, 80, 95 120, 150, 200 Pipe I.. Mounting Thread Mounting Thread Model Number Index (old Items are Stocked) PT - 5 - NR - M5 Tube I.. (old Items are Stocked) 2 1/4 SPP emale T-50-2 N2 1/4 NPT emale T-60-N2 2 1/4 SPP emale T-60-2 N4 1/2 NPT emale T-120-N4 4 1/2 SPP emale T-120-4 up Material Stocked Mounting Thread NR Nitrile M5 M5 Rubber N1 1/8 NPT SI Silicone 1 1/8 SPP vailable M10 M10 (onsult actory) N2 1/4 NPT U Urethane 2 1/4 SPP NR Nitrile S N4 1/2 NPT R hloroprene 4 1/2 SPP SI Silicone See hart S elow KM louro Rubber S igh Temp Z Markless.25 (6.35).312 (8) 16 Parker annifin orporation ivision

atalog 0802-2/US (Revised 10/8/04) imensions imensions PT-5 thru PT-15 PT-60 thru PT-95 9/16" M5x0.8 N2: 1/4 NPT 2: 1/4 SPP Vacuum ups PT Vacuum up ssemblies PT-120 thru PT-200 Model Number Ø PT-5-*-.20 (5).57 (14.5).03 (.8) PT-6-*-.24 (6).57 (14.5).03 (.8) PT-8-*-.31 (8).59 (15).05 (1.2) PT-10-*-.39 (10).57 (14.5).06 (1.5) PT-15-*-.59 (15).63 (16).08 (2) PT-20-*-.79 (20) 1.04 (26.5).10 (2.5) PT-25-*-.98 (25) 1.10 (28).12 (3) PT-30-*- 1.18 (30) 1.02 (26).08 (2) PT-35-*- 1.38 (35) 1.10 (28).12 (3) PT-40-*- 1.57 (40) 1.10 (28).16 (4) PT-50-*- 1.97 (50) 1.14 (29) 16 (4) PT-60-*- 2.36 (60) 1.40 (35.5).20 (5) PT-80-*- 3.15 (80) 1.48 (37.5).24 (6) PT-95-*- 3.74 (95) 1.50 (38).24 (6) PT-120-*- 4.72 (120) 1.83 (46.5).94 (24).51 (13).24 (6) PT-150-*- 5.91 (150) 2.11 (53.5).94 (24).51 (13).35 (9) PT-200-*- 7.87 (200) 2.30 (58.5).94 (24).51 (13).51 (13) * up Material Thread size PT-20 thru PT-50 20 thru 40: 1/2" 50: 9/16" 2.24 (57) O.. 1.854 (48) cross lats N4: 1/2 NPT 4: 1/2 SPP M8 x 1.25 Mtg. Screws on 40mm ia. enterline N1: 1/8 NPT 1: 1/8 SPP 2: 1/4 SPP 1/8 NPT or 1/8 SPP 17 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information PTK Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Mounting Thread Tube I.. up Screw arbed ulkhead for P ups Vacuum ups PTK Vacuum up ssemblies Model Number Index (old Items are Stocked) PTK - 2 - NR - up iameter (mm) 2 (2) 25 (25) 3.5 (3.5) 30 (30) 5 (5) 35 (35) 6 (6) 40 (40) 8 (8) 50 (50) 10 (10) 60 (60) 15 (15) 80 (80) 20 (20) 95 (95) up iameter Vacuum Port TK itting Mounting Included in Kit (mm) ode Thread Part Number up Screw Only Thread Tube I (old Items are Stocked) up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) U Urethane NR Nitrile S R hloroprene SI Silicone S KM louro Rubber S igh Temp Z Markless Vacuum Port lank arb N1 1/8 NPT 1 1/8 SPP R1 1/8 SPT See hart elow 2, 3.5 lank arb TK-2 N/ M5x0.5 Male.11 (2.5) 5, 6, 8, 10 lank arb TK-5 N/ M9x1.0 Male.157 (4) 15 lank arb YK-15 P-15-M5 M8x1.25 Male.157 (4) 20 lank arb YK-20 P-20-M5 M8x1.25 Male.157 (4) 25, 30, 35, 40 lank arb YK-25 P-25/40-M6 M10x1.5 Male.157 (4) 50 lank arb YK-50 P-50-M8 M10x1.5 Male.157 (4) N1 1/8 NPT TK-60-N1 N/ M16x1.5 Male N/ 60, 80, 95 1 1/8 SPP TK-60-1 N/ M16x1.5 Male N/ R1 1/8 SPT TK-60-R1 N/ M16x1.5 Male N/ 18 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions PTK-2 thru PTK-3.5.078 (2) PTK-15 thru PTK-20.20 (5).197 ia. Ø (5) M8x1.25 SW12.216 ia. Ø (5.5) 2 Places.39 (10).098 ia. Ø (2.5) M5 SW7.79 (20).118 ia. Ø (3).047 ia. Ø (1.2) PTK-25 thru PTK-50.197 ia. Ø (5) M10x1.5 M5x0.8 SW14 Vacuum ups PTK Vacuum up ssemblies PTK-5 thru PTK-10.197 ia. Ø (5) M9 SW12.098 ia. Ø (2.5) Model Wt Ø Number oz. (g) PTK-2-*.08 (2).93 (23.5).33 (8.5).43 (11).02 (.5).28 (8) PTK-3.5-*.14 (3.5).93 (23.5).33 (8.5).43 (11).02 (.5).28 (8) PTK-5-*.20 (5) 1.20 (30.5).39 (10).55 (14).03 (.8).61 (15.5).12 (3).39 (11) PTK-6-*.24 (6) 1.20 (30.5).39 (10).55 (14).03 (.8).61 (15.5).12 (3).39 (11) PTK-8-*.31 (8) 1.22 (31).39 (10).55 (14).05 (1.2).61 (15.5).12 (3).39 (11) PTK-10-*.39 (10) 1.81 (46).63 (16).88 (22.5).06 (1.5).61 (15.5).12 (3).53 (15) PTK-15-*.59 (15) 1.81 (46).63 (16).86 (22).07(1.9).59 (15).12 (3).71 (20) PTK-20-*.79 (20) 1.89 (48).63 (16).86 (22).09 (2.3).59 (15).20 (5).71 (20) PTK-25-*.98 (25) 2.44 (62).63 (16) 1.26 (32).12 (3).71 (20).20 (5) 1.41 (40) PTK-30-* 1.18 (30) 2.36 (60).63 (16) 1.26 (32).08 (2).71 (20).20 (5) 1.41 (40) PTK-35-* 1.38 (35) 2.44 (62).63 (16) 1.26 (32).12 (3).71 (20).20 (5) 1.41 (40) PTK-40-* 1.57 (40) 2.44 (62).63 (16) 1.26 (32).14 (3.5).71 (20).20 (5) 1.41 (40) PTK-50-* 1.97 (50) 2.48 (63).63 (16) 1.26 (32).16 (4).71 (20).20 (5) 1.77 (50) PTK-60-*- 2.36 (60) 2.30 (58.5) 1.67 (42.5).20 (5).79 (20).24 (6) 4.59 (130) PTK-80-*- 3.15 (80) 2.38 (60.5) 1.67 (42.5).24 (6).79 (20).24 (6) 6.00 (170) PTK-95-*- 3.74 (95) 2.40 (61) 1.67 (42.5).24 (6).79 (20).24 (6) 7.77 (220) * up Material Vacuum Port.118 ia. Ø (3) PTK-60 thru PTK-95 M16x1.5 SW21 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT 19 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information PYK Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Mounting Thread Tube I.. up Screw 90 arbed dapter for P ups Vacuum ups PYK Vacuum up ssemblies Model Number Index (old Items are Stocked) PYK - 5 - NR - up iameter (mm) 2 (2) 35 (35) 3.5 (3.5) 40 (40) 5 (5) 50 (50) 6 (6) 60 (60) 8 (8) 80 (80) 10 (10) 95 (95) 15 (15) 120 (120) 20 (20) 150 (150) 25 (25) 200 (200) 30 (30) Vacuum Port lank arb N1 1/8 NPT 1 1/8 SPP R1 1/8 SPT See hart elow up iameter Vacuum Port YK itting Mounting Included in Kit (mm) ode Thread Part Number up Screw Only Thread Tube I 2, 3.5 lank arb YK-2 N/ M3x0.5 emale.078 (2) 5, 6, 8, 10 lank arb YK-5 N/ M4x0.7 emale.157 (4) 15 lank arb YK-15 P-15-M5 M4x0.7 emale.157 (4) 20 lank arb YK-20 P-20-M5 M4x0.7 emale.157 (4) 25, 30, 35, 40 lank arb YK-25 P-25/40-M6 M6x1.0 emale.157 (4) 50 lank arb YK-50 P-50-M8 M6x1.0 emale.157 (4) 60, 80, 95 N1 1/8 NPT 1 1/8 SPP R1 1/8 SPT (old Items are Stocked) up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) U Urethane NR Nitrile S R hloroprene SI Silicone S KM louro Rubber S igh Temp Z Markless YK-60-N1 N/ M8x1.25 emale N/ YK-60-1 N/ M8x1.25 emale N/ YK-60-R1 N/ M8x1.25 emale N/ N1 1/8 NPT YK-120-N1 N/ M16x1.5 emale N/ 120, 150, 200 1 1/8 SPP YK-120-1 N/ M16x1.5 emale N/ R1 1/8 SPT YK-120-R1 N/ M16x1.5 emale N/ 20 Parker annifin orporation ivision

atalog 0802-2/US (Revised 10/8/04) imensions imensions PYK-2 thru PYK-3.5.098 ia. Ø (2.5).047 ia. Ø (1.2) PYK-25 thru PYK-50.197 ia. Ø (5).118 ia. Ø (3) M3x0.5 M6x1.0 PYK-5 thru PYK-10.197 ia. Ø (5).118 ia. Ø (3) PYK-60 thru PYK-95 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT Vacuum ups PYK Vacuum up ssemblies PYK-120 thru PYK-200 Model Wt Ø Number oz (g) PYK-2-*.08 (2).79 (20).43 (11).63 (16).02 (.5).02 (.5).33 (8.5).11 (3) PYK-3.5-*.14 (3.5).79 (20).43 (11).63 (16).02 (.5).02 (.5).33 (8.5).11 (3) PYK-5-*.20 (5) 1.14 (29).51 (13).89 (22.5).03 (.8).24 (6).63 (16).56 (16) PYK-6-*.24 (6) 1.14 (29).51 (13).89 (22.5).03 (.8).24 (6).63 (16).56 (16) PYK-8-*.31 (8) 1.16 (29.5).51 (13).89 (22.5).05 (1.2).24 (6).63 (16).56 (16) PYK-10-*.39 (10) 1.18 (30).51 (13).89 (22.5).06 (1.5).24 (6).63 (16).56 (16) PYK-15-*.59 (15) 1.18 (30).55 (14).87 (22).07 (1.9).24 (6).63 (16).71 (20) PYK-20-*.79 (20) 1.26 (32).55 (14).87 (22).09 (2.3).24 (6).63 (16).71 (20) PYK-25-*.98 (25) 1.81 (46).79 (20) 1.26 (32).12 (3).31 (8).63 (16) 1.41 (40) PYK-30-* 1.18 (30) 1.73 (44).79 (20) 1.26 (32).08 (2).31 (8).63 (16) 1.41 (40) PYK-35-* 1.38 (35) 1.81 (46).79 (20) 1.26 (32).12 (3).31 (8).63 (16) 1.41 (40) PYK-40-* 1.57 (40) 1.81 (46).79 (20) 1.26 (32).14 (3.5).31 (8).63 (16) 1.77 (50) PYK-50-* 1.97 (50) 1.85 (47).79 (20) 1.26 (32).16 (4).31 (8).63 (16) 1.94 (55) PYK-60-*- 2.36 (60) 2.30 (58.5) 1.10 (28) 1.57 (40).20 (5).43 (11) 4.24 (120) PYK-80-*- 3.15 (80) 2.38 (60.5) 1.10 (28) 1.57 (40).24 (6).43 (11) 5.65 (160) PYK-95-*- 3.74 (95) 2.40 (61) 1.10 (28) 1.57 (40).24 (6).43 (11) 7.42 (210) PYK-120-*- 4.72 (120) 2.94 (75.5).47 (12) 1.97 (50).24 (6).79 (20) 1.18 ia. (30) 22.6 (640) PYK-150-*- 5.91 (150) 3.25 (82.5).47 (12) 1.97 (50).35 (9).79 (20) 1.18 ia. (30) 32.1 (910) PYK-200-*- 7.87 (200) 3.44 (87.5).47 (12) 1.97 (50).51 (13).79 (20) 1.18 ia. (30) 42.4 (1200) * up Material Vacuum Port M4x0.7 M8x1.25 PYK-15 thru PYK-20.197 ia. Ø (5).118 ia. Ø (3) 2.75 ia. (70) (SW65) M16 M8 x 1.25 Mtg. Screws on 40mm ia. enterline M4x0.7 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT 21 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information PTYS Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Shown are interchangable connectors & plugs for port connections. Interchangable* Pushlock Tube itting Mounting Thread ulkhead Level ompensator for P ups Vacuum ups PTYS Vacuum up ssemblies up iameter Stroke (mm) (mm) 2 (2) 3.5 (3.5) 5 (5) 6 (6) 3, 10, 15 8 (8) 10 (10) 15 (15) 20 (20) 25 (25) 30 (30) 35 (35) 6, 15, 30 40 (40) 50 (50) 60 (60) 80 (80) 30, 50, 70 95 (95) 120 (120) 150 (150) 20, 70 200 (200) up iameter Vacuum Port TYS ssembly 1 2 Included in Kit (mm) ode Thread Part Number Stroke lbf (N) lbf (N) 2, 3.5 M3 TYS-2-3 3mm.11 (.49).13 (.59) M3x0.5 TYS-2-10 10mm.11 (.49).13 (.59) emale TYS-2-15 15mm.11 (.49).13 (.59) 5, 6, 8, 10, 15 M5 TYS-5-3 3mm.11 (.49).13 (.59) M5x0.8 TYS-5-10 10mm.14 (.61).26 (1.17) emale TYS-5-15 15mm.15 (.64).26 (1.17) 20, 25, 30, 35, 40 M5 TYS-20-6 6mm.56 (2.5).79 (3.4) M5x0.8 TYS-20-15 15mm.56 (2.5) 1.2 (4.9) emale TYS-20-30 30mm.67 (2.9) 1.4 (5.9) 50 M5 TYS-50-6 6mm.56 (2.5).79 (3.4) M5x0.8 TYS-50-15 15mm.56 (2.5) 1.2 (4.9) emale TYS-50-30 30mm.67 (2.9) 1.4 (5.9) 60, 80, 95 N1 TYS-60-30 30mm 1.6 (6.8) 3.6 (15.6) 1/8 NPT TYS-60-50 50mm 1.9 (8.3) 4.5 (19.6) emale TYS-60-70 70mm 2.2 (9.5) 4.8 (21) 120, 150, 200 N2 arb itting Plug * Not included with assembly Model Number Index (old Items are Stocked) PTYS 2 15 NR M3 up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) U Urethane NR Nitrile S R hloroprene SI Silicone S KM louro Rubber S igh Temp Z Markless (old Items are Stocked) ompression orce 1/4 NPT TYS-120-20 20mm 3.6 (15.6) 6.8 (29) emale TYS-120-70 70mm 3.4 (14.7) 6.8 (29) 1 0% of Stroke Vacuum Port M3 M3 M5 M5 N1 1/8 NPT N2 1/4 NPT See hart elow 2 100% of Stroke 22 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions PTYS23 thru PTYS3.515 M3x0.5 M8x0.75 SW12 M5 SW6.35 (9) Vacuum ups PTYS Vacuum up ssemblies PTYS53 thru PTYS1515 M5x0.8 M8x0.75 Model Wt Ø Number oz (g) PTYS23*.08 (2) 1.97 (50).43 (11).28 (7).02 (.5).12 (3).12 (3).91 (23).21 (6) PTYS210*.08 (2) 2.24 (57).43 (11).28 (7).02 (.5).39 (10).12 (3).91 (23).39 (11) PTYS215*.08 (2) 2.74 (69.5).43 (11).28 (7).02 (.5).59 (15).12 (3) 1.20 (30.5).53 (15) PTYS3.53*.12 (3.5) 1.97 (50).43 (11).28 (7).02 (.5).12 (3).12 (3).91 (23).21 (6) PTYS3.510*.12 (3.5) 2.24 (57).43 (11).28 (7).02 (.5).39 (10).12 (3).91 (23).39 (11) PTYS3.515*.12 (3.5) 2.74 (69.5).43 (11).28 (7).02 (.5).59 (15).12 (3) 1.20 (30.5).53 (15) PTYS53*.20 (5) 2.13 (54).51 (13).31 (8).03 (.8).12 (3).12 (3).91 (23).25 (7) PTYS510*.20 (5) 2.42 (61.5).51 (13).31 (8).03 (.8).39 (10).12 (3).91 (23).65 (18.5) PTYS515*.20 (5) 2.91 (74).51 (13).31 (8).03 (.8).59 (15).12 (3) 1.20 (30.5).74 (21) PTYS63*.24 (6) 2.15 (54.5)).51 (13).31 (8).03 (.8).12 (3).12 (3).91 (23).25 (7) PTYS610*.24 (6) 2.42 (61.5).51 (13).31 (8).03 (.8).39 (10).12 (3).91 (23).65 (18.5) PTYS615*.24 (6) 2.91 (74).51 (13).31 (8).03 (.8).59 (15).12 (3) 1.20 (30.5).74 (21) PTYS83*.31 (8) 2.17 (55.5).51 (13).31 (8).05 (1.2).12 (3).12 (3).91 (23).25 (7) PTYS810*.31 (8) 2.44 (62).51 (13).31 (8).05 (1.2).39 (10).12 (3).91 (23).65 (18.5) PTYS815*.31 (8) 2.93 (74.5).51 (13).31 (8).05 (1.2).59 (15).12 (3) 1.20 (30.5).74 (21) PTYS103*.39 (10) 2.14 (54).51 (13).31 (8).06 (1.5).12 (3).12 (3).91 (23).64 (18) PTYS1010*.39 (10) 2.48 (63).51 (13).31 (8).06 (1.5).39 (10).12 (3).91 (23).65 (18.5) PTYS1015*.39 (10) 2.95 (75).51 (13).31 (8).06 (1.5).59 (15).12 (3) 1.20 (30.5).74 (21) PTYS153*.59 (15) 2.20 (56).51 (13).31 (8).08 (2).12 (3).12 (3).91 (23).64 (18) PTYS1510*.59 (15) 2.50 (63.5).51 (13).31 (8).08 (2).39 (10).12 (3).91 (23).65 (18.5) PTYS1515*.59 (15) 2.97 (75.5).51 (13).31 (8).08 (2).59 (15).12 (3) 1.20 (30.5).74 (21) * up Material Vacuum Port SW12 M8x0.75 M5x0.8 SW6.35 (9) 23 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions PTYS206 thru PTYS5030 M5x0.8 M14x1 M8 M5x0.8 Vacuum ups PTYS Vacuum up ssemblies Model Wt Ø Number oz (g) PTYS206*.79 (20) 3.01 (76.5).67 (17).39 (10).09 (2.3).24 (6).20 (5) 1.42 (36) 2.3 (65) PTYS2015*.79 (20) 3.37 (85.5).67 (17).39 (10).09 (2.3).59 (15).20 (5) 1.42 (36) 2.5 (71) PTYS2030*.79 (20) 4.82 (122.5).67 (17).39 (10).09 (2.3) 1.18 (30).20 (5) 2.28 (58) 3.4 (96) PTYS256*.98 (25) 3.07 (78).67 (17).39 (10).12 (3).24 (6).20 (5) 1.42 (36) 2.3 (66) PTYS2515*.98 (25) 3.43 (87).67 (17).39 (10).12 (3).59 (15).20 (5) 1.42 (36) 2.5 (71) PTYS2530*.98 (25) 4.88 (124).67 (17).39 (10).12 (3) 1.18 (30).20 (5) 2.28 (58 3.4 (96) PTYS306* 1.18 (30) 2.99 (76).67 (17).39 (10).08 (2).24 (6).20 (5) 1.42 (36) 2.4 (67) PTYS3015* 1.18 (30) 3.35 (85).67 (17).39 (10).08 (2).59 (15).20 (5) 1.42 (36) 2.5 (72) PTYS3030* 1.18 (30) 4.80 (122).67 (17).39 (10).08 (2) 1.18 (30).20 (5) 2.28 (58 3.5 (97) PTYS356* 1.38 (35) 3.07 (78).67 (17).39 (10).12 (3).24 (6).20 (5) 1.42 (36) 2.5 (71) PTYS3515* 1.38 (35) 3.43 (87).67 (17).39 (10).12 (3).59 (15).20 (5) 1.42 (36) 2.6 (74) PTYS3530* 1.38 (35) 4.88 (124).67 (17).39 (10).12 (3) 1.18 (30).20 (5) 2.28 (58 3.5 (99) PTYS406* 1.57 (40) 3.07 (78).67 (17).39 (10).14 (3.5).24 (6).20 (5) 1.42 (36) 2.5 (71) PTYS4015* 1.57 (40) 3.43 (87).67 (17).39 (10).14 (3.5).59 (15).20 (5) 1.42 (36) 2.7 (76) PTYS4030* 1.57 (40) 4.88 (124).67 (17).39 (10).14 (3.5) 1.18 (30).20 (5) 2.28 (58 3.6 (101) PTYS506* 1.97 (50) 3.11 (79).67 (17).39 (10).16 (4).24 (6).20 (5) 1.42 (36) 2.8 (80) PTYS5015* 1.97 (50) 3.46 (88).67 (17).39 (10).16 (4).59 (15).20 (5) 1.42 (36) 3.0 (85) PTYS5030* 1.97 (50) 4.92 (125).67 (17).39 (10).16 (4) 1.18 (30).20 (5) 2.28 (58) 3.9 (110) * up Material Vacuum Port SW12 SW19 SW17.20 (5) 24 Parker annifin orporation ivision

atalog 0802-2/US (Revised 10/8/04) imensions imensions PTYS6030 thru PTYS9570 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT M22x1.5 M14 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT SW19.28 (7) J SW30 SW24 Vacuum ups PTYS Vacuum up ssemblies PTYS12020 thru PTYS20070 N2: 1/4 NPT 2: 1/4 SPP R2: 1/4 SPT N2: 1/4 NPT 2: 1/4 SPP R2: 1/4 SPT M30x1.5 M8 x 1.25 Mtg. Screws on 40mm ia. enterline Model Wt Ø J Number oz (g) PTYS6030* 2.36 (60) 6.02 (153) 1.28 (32.5).78 (20).20 (5) 1.77 (45).39 (10) 1.97 (50).47 (12) 9.7 (282) PTYS6050* 2.36 (60) 7.01 (178) 1.28 (32.5).78 (20).20 (5) 2.76 (70).39 (10) 1.97 (50).47 (12) 11.2 (316) PTYS6070* 2.36 (60) 7.99 (203) 1.28 (32.5).78 (20).20 (5) 3.74 (95).39 (10) 1.97 (50).47 (12) 12.1 (343) PTYS8030* 3.15 (80) 6.10 (155) 1.28 (32.5).78 (20).24 (6) 1.77 (45).39 (10) 1.97 (50).47 (12) 11 (310) PTYS8050* 3.15 (80) 7.09 (180) 1.28 (32.5).78 (20).24 (6) 2.76 (70).39 (10) 1.97 (50).47 (12) 12.2 (344) PTYS8070* 3.15 (80) 8.07 (205) 1.28 (32.5).78 (20).24 (6) 3.74 (95).39 (10) 1.97 (50).47 (12) 13.1 (371) PTYS9530* 3.74 (95) 6.12 (155.5) 1.28 (32.5).78 (20).24 (6) 1.77 (45).39 (10) 1.97 (50).47 (12) 12.4 (350) PTYS9550* 3.74 (95) 7.11 (180.5) 1.28 (32.5).78 (20).24 (6) 2.76 (70).39 (10) 1.97 (50).47 (12) 13.6 (384) PTYS9570* 3.74 (95) 8.09 (205.5) 1.28 (32.5).78 (20).24 (6) 3.74 (95).39 (10) 1.97 (50).47 (12) 14.5 (411) PTYS12020* 4.72 (120) 7.56 (192) 1.28 (32.5).71 (18).24 (6) 1.38 (35).39 (10) 2.36 (60) 1.38 (35) 41.2 (1165) PTYS12070* 4.72 (120) 10.12 (257) 1.28 (32.5).71 (18).24 (6) 3.94 (100).39 (10) 2.36 (60) 1.38 (35) 44 (1246) PTYS15020* 5.91 (150) 7.83 (199) 1.28 (32.5).71 (18).35 (9) 1.38 (35).39 (10) 2.36 (60) 1.38 (35) 49 (1389) PTYS15070* 5.91 (150) 10.39 (264) 1.28 (32.5).71 (18).35 (9) 3.94 (100).39 (10) 2.36 (60) 1.38 (35) 52 (1471) PTYS20020* 7.87 (200) 8.03 (204) 1.28 (32.5).71 (18).51 (13) 1.38 (35).39 (10) 2.36 (60) 1.38 (35) 62 (1755) PTYS20070* 7.87 (200) 10.59 (269) 1.28 (32.5).71 (18).51 (13) 3.94 (100).39 (10) 2.36 (60) 1.38 (35) 64.9 (1836) * up Material Vacuum Port M18 SW26 SW36.31 (8) J 25 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information P Oval Vacuum ups imensions P-2x4 Vacuum ups P Oval Vacuum ups Model Number Ø Ø 1 Ø Ø Ø P-2x4.16 (4).08 (2).10 (2.6).05 (1.2).24 (6).24 (6).02 (.5).14 (3.5).10 (2.5) P-3.5x7.28 (7).14 (3.5).10 (2.6).06 (1.5).24 (6).24 (6).03 (.8).14 (3.5).10 (2.5) PTK Vacuum up ssemblies Model Number Index PTK - 2x4 - NR up iameter (mm) 2x4 (2 x 4) 3.5x7 (3.5 x 7) 1 up Material Stocked NR Nitrile Rubber SI Silicone vailable NR Nitrile S R hloroprene SI Silicone S U Urethane KM louro Rubber Model Number Index (ups Only) P - 2x4 - NR (old Items are Stocked) pplications These suction cups are for applications where insufficient surface areas are available for standard round P cups to secure vacuum for transfer. The oval or rectangular design allows you to maximize the available space to properly lift the product in high speed automation. These cups are non-rotational. P -3.5x7 up iameter (mm) 2x4 (2x4) 3.5x7 (3.5x7) PYK Vacuum up ssemblies Model Number Index PYK - 2x4 - NR up iameter (mm) 2x4 (2 x 4) 3.5x7 (3.5 x 7) up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) NR Nitrile S R hloroprene SI Silicone S U Urethane KM louro Rubber 1 up Material Stocked NR Nitrile Rubber SI Silicone vailable NR Nitrile S R hloroprene SI Silicone S U Urethane KM louro Rubber 26 Parker annifin orporation ivision

atalog 0802-2/US imensions Installation P Oval up with Top Stem onnection Vacuum ups Oval Vacuum up ssemblies Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup, to optimize response time of the system. Your requirements may vary. P Oval up Size (mm) TK itting ssembly Tube I Mounting Thread 2x4 3.5x7 TK-2x4/3.5x7.078 (2) M3x0.5 Male P Oval up with Side Stem onnection Mounting Thread PTK P Oval up Size (mm) YK itting Part Number Tube I Mounting Thread 2x4 3.5x7 Tube I.. PTK-2x4 & PTK-3.5x7.078 (2) YK-2x4/3.5x7.078 (2) M3 emale PYK-2x4 & PYK-3.5x7.098 ia. Ø (2.5) Mounting Thread Tube I...20 (5).047 ia. Ø (1.2).216 ia. Ø (5.5) 2 Places.79 (20) PYK.1 10 ia. Ø (2.8) M5 SW7.79 (20) M3.047 ia. Ø (1.2).33 (8.5).97.40 (24.7) (10.2).02 (.5).43.20 (11).62 (5) (15.7).76 (19.2).02 (.5) 27 Parker annifin orporation ivision

atalog 0802-2/US eatures P5V-S ouble Lip lat ups ottom View Vacuum ups P5V-S Vacuum ups eatures ouble Sealing Lips for lexible Sheet andling Vacuum up rooves on Underside Increase olding rea Resists cceleration and eceleration Shear orces Strong Low Profile for ast Response Metal Insert itting for Stable Vertical and orizontal Lifts pplications These suction cups are ideal for applications where the product may flex when being lifted. ll cups have a double sealing lip and cleats to increase holding capacity. The top of the cup has a ribbed outer lip to prevent it from rolling over the surface to be lifted. ual sealing lips provide 2 seals for vacuum. s the product flexes, the outer lip seal may break, but the inner lip seal will hold the degree of vacuum for continued lifting capacity. In these types of applications, sizing should be done on the inner diameter cup dimension. 28 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information Model Number Index (old Items are Stocked) Specifications P5V - S 15014 up iameter (mm) 05011 (50) 07512 (75) 10013 (100) 15014 (150) 30018 (300) ll ups come standard with emale Vacuum Ports. (SPP) Part up Thread Number iameter (mm) Size 05011 (50) 1/8" 07512 (75) 1/4" 10013 (100) 3/8" 15014 (150) 1/2" 30018 (300)* 1" * 300mm up has an additional 1/2" female port for increase vacuum flow. Vacuum ups P5V-S Vacuum ups N up Material Stocked N Nitrile Rubber vailable (onsult actory) S Silicone 29 Parker annifin orporation ivision

atalog 0802-2/US pplications & Technical ata pplication uide lat - Smooth Surface Main ata for lat P5V-S ups Volume V Vacuum ups P5V-S Vacuum ups up eflection Products With Smooth Surfaces estacking pplications up iameter up Radius R Model rea*** Volume (V) eflection (S) (mm) Number Inner Outer cm 2 Liters (mm) R1* R2** P5V-S05011 1.38 (35) 1.97 (50) 19.6.001.16 (4) 3.86 (98) 3.15 (80) P5V-S07512 2.13 (54) 2.95 (75) 44.2.03.24 (6) 6.97 (177) 4.88 (124) P5V-S10013 2.83 (72) 3.94 (100) 78.5.0667.30 (8) 10.00 (254) 6.34 (161) P5V-S15014 4.17 (106) 5.91 (150) 176.7.2083.43 (11) 12.17 (309) 9.92 (252) P5V-S30018 8.07 (205) 11.81 (300) 706.7 1.467.75 (19) 45.59 (1158) 22.87 (581) * Minimum permissible radius for lifting using inner lip. ** Minimum permissible radius for lifting using outer lip. *** rea based on Outer up iameter S R1 Radius R2 30 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions Model Number * up Material 1/2 (30018 Only) 2.76 (70) Vacuum ups P5V-S Vacuum ups Ø Ø P5V-S50* 1.97 (50) 1/8 1.38 (35) 0.43 (11) 0.71 (18) 0.087 (2.2) 0.51 (13) 0.146 (3.7) P5V-S75* 2.95 (75) 1/4 2.13 (54) 0.55 (14) 0.87 (22) 0.138 (3.5) 0.67 (17) 0.217 (5.5) P5V-S100* 3.94 (100) 3/8 2.83 (72) 0.71 (18) 1.10 (28) 0.197 (5) 0.87 (22) 0.295 (7.5) P5V-S150* 5.91 (150) 1/2 4.17 (106) 1.02 (26) 1.65 (42) 0.276 (7) 1.06 (27) 0.43 (11) P5V-S300* 11.81 (300) 1 8.07 (205) 1.73 (44) 2.76 (70) 0.59 (15) 1.81 (46) 0.75 (19) 31 Parker annifin orporation ivision

atalog 0802-2/US eatures P ellows Vacuum ups P Series Vacuum ups Versatile bellow cup design provides increased sealing lip and level compensation for products with irregular, smooth, curved surfaces. PTM Series Male Thread onnector Simple male connection for low profile positions secured to a plate or bracket. UN, NPT,, metric threads. Internal hex for easy assembly. itting Material: luminum. PT Series emale Thread onnector Simple female connection for low profile positions secured to a plate or bracket. NPS, threads. Internal hex for easy assembly. itting Material: luminum. Vacuum ups P Vacuum ups eatures ellows esign for Level ompensation Within Restricted learances Sheet Separation for lexible and Stacked Products Soft Seal Lip for lexible Products 10mm to 150mm iameters pplications These cups are for curved, corrugated, lightly textured surfaces and flexible product. Under vacuum, the bellow cup will collapse on contact and lift the product for a short distance. This inherent performance facilitates lifting and destack operations by breaking the vacuum between stacked product. The bellow style adds level compensation for applications that have inconsistent stack heights or uneven surfaces. The inclusive 30-degree rotation of the bellow helps maintain the vacuum seal when lifting sheet products that flex. ecause of it s shape however the bellows suction cup is not suitable for applications involving lifting vertical surfaces. PTK Series arbed ulkhead Top stem connectors secured with jam nuts and allow tubing connections at the top side. Nickel plated brass materials. PYK Series 90 arbed dapter Side stem connectors allow you to secure the stem with a bolt through a plate or L bracket to allow the tube connection from the side port. Nickel plated brass materials. PTYS Series ulkhead Level ompensator 303 stainless steel construction secured with jam nuts. Spring biased compensators can absorb impacts of down-strokes and adjust for different levels of pick up points. 303 stainless corrosion resistant materials with drymet bushings increases the strength and life. 32 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information Model Number Index (ups Only) (old Items are Stocked) Specifications Suction up Material Vacuum ups P Vacuum ups P - 10 - NR up iameter (mm) 10 (10) 40 (40) 15 (15) 50 (50) 20* (20) 75 (75) 20** (20) 110 (110) 30 (30) 150 (150) * vailable for PTK & PYK up ssemblies Only. ** vailable for PTM, PT & PTYS up ssemblies Only. up Material Stocked NR Nitrile Rubber SI Silicone U Urethane vailable (onsult actory) NR Nitrile S R hloroprene SI Silicone S KM louro Rubber S igh Temp NR NR R SI SI U KM S Nitrile Silicone louro Silicone Nitrile hloroprene Silicone Urethane S* S* Rubber igh Temp Operating -20-30 -30-60 -60-30 -10-50 Temperature ( ) to +120 to +120 to +140 to +250 to +250 to +120 to +230 to +300 lack / lack / lack / olor lack reen White lue rey lue ot Red ot White ot ardness, 55 ±5 70 ±5 55 ±5 55 ±5 55 ±5 55 ±5 70 ±5 55 ±5 Shore ( Sh) lectrical 800 800 (Ωm) to 1000 to 1000 Wear Tear Strength ging Ozone asoline Oil cid lkali hemical Mechanical = excellent; = very good; = good; = medium; = poor; = not recommended * S: lectric Static issipative Material 33 Parker annifin orporation ivision

atalog 0802-2/US pplications & Technical ata pplication uide ellows Round Objects Main ata for ellows P ups Vacuum ups P Vacuum ups Lifting orce @60% (N) up Radius Model up iameter rea Volume (V) eflection (S) R Number cm 2 Liters (mm) (mm) P-10-*.39 (10) 0.79.0002 4.80.16 (4) 4 P-15-*.59 (15) 1.77.0007 10.80.24 (6) 6 P-20-*.79 (20) 3.14.001 19.20.35 (9) 8 P-20-*.79 (20) 3.14.001 19.20.35 (9) 8 P-30-* 1.18 (30) 7.07.004 43.2.51 (13) 15 P-40-* 1.57 (40) 12.60.009 76.9.51 (13) 30 P-50-* 1.97 (50) 19.60.026 120.79 (20) 40 P-75-* 2.95 (75) 44.02.076 270.87 (22) 70 P-110-* 4.33 (110) 95.00.111 434 1.14 (29) 100 P-150-* 5.91 (150) 176.70.260 1081 1.50 (38) 130 * up Material Volume V Uneven Surfaces urved Product Level ompensation up eflection S lexible Product Soft Seal Lip Radius R 34 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions P-10 and P-20 P-50 Model Number * up Material J P-110 and P-150 Vacuum ups P Vacuum ups P-20 thru P-40 P-75 Ø Ø Ø Ø ØJ P-10-*.42 (10.6).16 (4).08 (2).79 (12.5).53 (13.5).30 (7.5).24 (6).08 (2).24 (6) P-15-*.59 (15).16 (4).16 (4).67 (17).63 (16).39 (10).24 (6).08 (2).24 (6) P-20-*.79 (20).24 (6).43 (10.8).94 (24).87 (22).47 (12).28 (7) P-20-*.79 (20).18 (4.6).43 (10.8).94 (24).77 (19.5).47 (12).18 (4.5) P-30-* 1.18 (30).23 (5.8).43 (10.8) 1.42 (36) 1.20 (30.5).67 (17).28 (7) P-40-* 1.57 (40).23 (5.8).43 (10.8) 1.81 (46) 1.20 (30.5).61 (15.5).28 (7) P-50-* 1.97(50).31 (7.8).78 (19.8) 2.34 (59.5) 1.44 (36.5).79 (20).28 (7) P-75-* 2.95 (75).49 (12.5) 3.31 (84) 1.71 (43.5).87 (22).10 (2.5) P-110-* 4.33 (110).55 (14).55 (14) 4.80 (122) 2.26 (57.5) 1.14 (29).059 (1.5) P-150-* 5.91 (150).79 (20).55 (14) 6.57 (167) 3.01 (76.5) 1.50 (38) 4xØ9xØ40.059 (1.5) M10x1.25 35 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information PTM Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Mounting Thread Tube I.. Male Threaded itting for P ups Vacuum ups PTM Vacuum up ssemblies PTM - 10 - NR - M5 up iameter (mm) 10 (10) 40 (40) 15 (15) 50 (50) 20 (20) 75 (75) 30 (30) up iameter Mounting Mounting TM itting Included in Kit (mm) Thread ode Thread Part Number Min. Tube I 10, 15 20, 30, 40 Model Number Index (old Items are Stocked) (old Items are Stocked) M5 M5x0.8 Male TM-5-M5 1 1/8 SPP Male TM-5-1 N1 1/8 NPT Male TM-20-N1 1 1/8 SPP Male TM-20-1 2 1/4 SPP Male TM-20-2 M10 M10x1.25 Male TM-20-M10 N1 1/8 NPT Male TM-50-N1.157 (4).157 (4) 50 1 1/8 SPP Male TM-50-1.157 (4) 2 1/4 SPP Male TM-50-2 N2 1/4 NPT Male TM-60-N2 75 2 1/4 SPP Male TM-60-2.25 (6.35) M10 M10x1.25 Male TM-60-M10 up Material Stocked Mounting Thread NR Nitrile M5 M5 Rubber N1 1/8 NPT SI Silicone 1 1/8 SPP U Urethane M10 M10 vailable N2 1/4 NPT (onsult actory) 2 1/4 SPP NR Nitrile S See hart R hloroprene elow SI Silicone S KM louro Rubber S igh Temp 36 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions PTM-10 thru PTM-15 M5: SW8 1: SW13 (10 & 15 Only) M5:.14 (3.5) 1:.20 (.5) (10 & 15 Only) (Revised 01/10/05) PTM-75 M5: M5 1: 1/8" SPP (10 & 15 Only) 9/16" M10x1.25 Vacuum ups PTM Vacuum up ssemblies PTM-20 thru PTM-50 N2: 1/4 NPT 2: 1/4 SPP M10: 10x1.25 20 thru 40: 1/2" 50: 9/16" N1: 1/8 NPT 1: 1/8 SPP M10: 10x1.25 2: 1/4 SPP Model Ø Number (M5) (N1 / 1) (M10 / 2) (N2) PTM-10-*-.39 (10).67 (17).18 (4.5).31 (8) See wg..30 (7.5) PTM-15-*-.59 (15).77 (19.5).18 (4.5).31 (8) See wg..39 (10) PTM-20-*-.79 (20) 1.06 (27).31 (8).39 (10).20 (5).47 (12) PTM-30-*- 1.18 (30) 1.40 (35.5).31 (8).39 (10).20 (5).67 (17) PTM-40-*- 1.57 (40) 1.40 (35.5).31 (8).39 (10).20 (5).61 (15.5) PTM-50-*- 1.97 (50) 1.63 (41.5).31 (8).39 (10).20 (5).79 (20) PTM-75-*- 3.74 (95) 1.99 (50.5).39 (10).59 (15).28 (7).87 (22) * up Material Thread Size 37 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information PT Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Pipe I.. Mounting Thread Mounting Thread emale Threaded itting for P ups Vacuum ups PT Vacuum up ssemblies Model Number Index (old Items are Stocked) PT - 10 - NR - M5 up iameter (mm) 10 (10) 50 (50) 15 (15) 75 (75) 20 (20) 110 (110) 30 (30) 150 (150) 40 (40) up iameter Mounting Mounting T itting Included in Kit (mm) Thread ode Thread Part Number Min. Tube I 10, 15 M5 M5x0.8 emale T-5-M5 1 1/8 SPP Male TM-5-1.157 (4) N1 1/8 NPT emale T-20-N1 20, 30, 40 1 1/8 SPP emale T-20-1.157 (4) 2 1/4 SPP emale T-20-2 N1 1/8 NPT emale T-50-N1 50 1 1/8 SPP emale T-50-1.157 (4) 2 1/4 SPP emale T-50-2 75 110, 150 Tube I.. (old Items are Stocked) N2 1/4 NPT emale T-60-N2 2 1/4 SPP emale T-60-2 N4 1/2 NPT emale T-120-N4 4 1/2 SPP emale T-120-4 up Material Stocked NR Nitrile Rubber SI Silicone U Urethane vailable (onsult actory) NR Nitrile S R hloroprene SI Silicone S KM louro Rubber S igh Temp Mounting Thread M5 M5 N1 1/8 NPT 1 1/8 SPP N2 1/4 NPT 2 1/4 SPP N4 1/2 NPT 4 1/2 SPP See hart elow.25 (6.35).312 (8) 38 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions PT-10 thru PT-15 PT-75 9/16" M5x0.8 1: 1/8 SPP N2: 1/4 NPT 2: 1/4 SPP Vacuum ups PT Vacuum up ssemblies PT-20 thru PT 50 PT-110 thru PT-150 Model Number Ø PT-10-*-.39 (10).85 (21.5).1.31 (8).30 (7.5) PT-15-*-.59 (15).94 (24).31 (8).39 (10) PT-20-*-.79 (20) 1.42 (36).55 (14).47 (12) PT-30-*- 1.18 (30) 1.75 (44.5).55 (14).70 (17) PT-40-*- 1.57 (40) 1.75 (44.5).55 (14).61 (15.5) PT-50-*- 1.97 (50) 1.99 (50.5).55 (14).79 (20) PT-75-*- 3.74 (95) 2.38 (60.5).77 (19.5).87 (22) PT-110-*- 4.72 (120) 3.07 (78).94 (24).51 (13) 1.14 (29) PT-150-*- 5.91 (150) 3.82 (97).94 (24).51 (13) 1.50 (38) * up Material Thread Size 20 thru 40: 1/2" 50: 9/16 2.24 (57) O.. 1.854 (48) cross lats N4: 1/2 NPT 4: 1/2 SPP N1: 1/8 NPT 1: 1/8 SPP 2: 1/4 SPP 1/4 NPT 1/4 SPP 39 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information PTK Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Mounting Thread. Tube I.. up Screw arbed ulkhead for P ups Vacuum ups PTK Vacuum up ssemblies Model Number Index (old Items are Stocked) PTK - 10 - NR - up iameter Vacuum Port TK itting Mounting Included in Kit (mm) ode Thread Part Number up Screw Only Thread Tube I up iameter (mm) 10 (10) 40 (40) 15 (15) 50 (50) 20 (20) 75 (75) 30 (30) (old Items are Stocked) up Material Stocked NR Nitrile Rubber SI Silicone U Urethane vailable (onsult actory) NR Nitrile S R hloroprene SI Silicone S KM louro Rubber S igh Temp Vacuum Port lank arb N1 1/8 NPT 1 1/8 SPP R1 1/8 SPT See hart elow 10, 15 lank arb TK-5 N/ M9x1.0 Male.157 (4) 20 lank arb TK-20 P-20-M5 M8x1.25 Male.157 (4) 30, 40 lank arb TK-25 P-25/40-M6 M10x1.25 Male.157 (4) 50 lank arb TK-50 P-50-M8 M10x1.25 Male.157 (4) N1 1/8 NPT TK-60-N1 N/ M16x1.5 Male N/ 75 1 1/8 SPP TK-60-1 N/ M16x1.5 Male N/ R1 1/8 SPT TK-60-R1 N/ M16x1.5 Male N/ 40 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions PTK-10 thru PTK-15 PTK-30 thru PTK-50.197 ia. Ø (5) M9x1.0 SW12.197 ia. Ø (5) M10x1.25 M5x0.8 SW14.098 ia. Ø (2.5).118 ia. Ø (3) Vacuum ups PTK Vacuum up ssemblies PTK-20 PTK-75.197 ia. Ø (5) M8x1.25 SW10 M16x1.5 SW21 Model Wt Ø Number oz (g) PTK-10-*.39 (10) 2.05 (52).39 (10).89 (22.5).30 (7.5).61 (15.5).12 (3).5 (15) PTK-15-*.59 (15) 2.15 (54.5).39 (10).89 (22.5).39 (10).61 (15.5).12 (3).5 (15) PTK-20-*.79 (20) 2.26 (57.5).63 (16).87 (22).47 (12).59 (15).20 (5).7 (21) PTK-30-* 1.18 (30) 3.09 (78.5).63 (16) 1.26 (32).67 (17).79 (20).20 (5) 1.6 (45) PTK-40-* 1.57 (40) 3.09 (78.5).63 (16) 1.26 (32).61 (15.5).79 (20).20 (5) 1.7 (48) PTK-50-* 1.97 (50) 3.33 (84.5).63 (16) 1.26 (32).79 (20).79 (20).20 (5) 2.2 (62) PTK-75-*- 3.74 (95) 3.29 (83.5) 1.67 (42.5).87 (22).24 (6) 6.5 (186) * up Material Vacuum Port.118 ia. Ø (3) N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT 41 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information PYK Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Tube I.. Mounting Thread. up Screw 90 arbed dapter for P ups Vacuum ups PYK Vacuum up ssemblies Model Number Index (old Items are Stocked) PYK - 10 - NR - up iameter Vacuum Port YK itting Mounting Included in Kit (mm) ode Thread Part Number up Screw Only Thread Tube I up iameter (mm) 10 (10) 40 (40) 15 (15) 50 (50) 20 (20) 75 (75) 30 (30) 110 (110) 40 (40) 150 (150) (old Items are Stocked) up Material Stocked NR Nitrile Rubber SI Silicone U Urethane vailable (onsult actory) NR Nitrile S R hloroprene SI Silicone S KM louro Rubber S igh Temp Vacuum Port lank arb N1 1/8 NPT 1 1/8 SPP R1 1/8 SPT See hart elow 10, 15 lank arb YK-5 N/ M4x0.7 emale.157 (4) 20 lank arb YK-20 P-20-M5 M4x0.7 emale.157 (4) 30, 40 lank arb YK-25 P-25/40-M6 M6x1.0 emale.157 (4) 50 lank arb YK-50 P-50-M8 M6x1.0 emale.157 (4) N1 1/8 NPT YK-60-N1 N/ M8x1.25 emale N/ 75 1 1/8 SPP YK-60-1 N/ M8x1.25 emale N/ R1 1/8 SPT YK-60-R1 N/ M8x1.25 emale N/ N1 1/8 NPT YK-120-N1 N/ M16x1.5 emale N/ 110, 150 1 1/8 SPP YK-120-1 N/ M16x1.5 emale N/ R1 1/8 SPT YK-120-R1 N/ M16x1.5 emale N/ 42 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions PYK-10 thru PYK-15 PYK-75 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT.197 ia. Ø (5).118 ia. Ø (3) M8x1.25 M4x0.7 PYK-110 thru PYK-150 Vacuum ups PYK Vacuum up ssemblies PYK-20 thru PYK-50 M8x1.25.197 ia. Ø (5).118 ia. Ø (3) 2.75 ia. (70) (SW65) M16x1.5 Model Wt Ø Number oz (g) PYK-10-*.39 (10) 1.42 (36).51 (13).89 (22.5).29 (7.5).24 (6).63 (16).6 (16) PYK-15-*.59 (15) 1.52 (38.5).51 (13).89 (22.5).39 (10).24 (6).63 (16).6 (16) PYK-20-*.79 (20) 1.63 (41.5).55 (14).87 (22).47 (12).24 (6).63 (16).7 (21) PYK-30-* 1.18 (30) 2.46 (62.5).79 (20) 1.26 (32).67 (17).24 (6).63 (16) 1.6 (45) PYK-40-* 1.57 (40) 2.46 (62.5).79 (20) 1.26 (32).61 (15.5).24 (6).63 (16) 2 (58) PYK-50-* 1.97 (50) 2.70 (68.5).79 (20) 1.26 (32).78 (20).24 (6).63 (16) 2.4 (67) PYK-75-*- 3.74 (95) 3.29 (83.5) 1.10 (28) 1.67 (42.5).86 (22).43 (11) 6.9 (176) PYK-110-*- 4.72 (120) 4.17 (106).47 (12) 1.97 (50) 1.14 (29).79 (20) 1.18 ia. (30) 26.4 (670) PYK-150-*- 5.91 (150) 4.92 (125).47 (12) 1.97 (50) 1.50 (38).79 (20) 1.18 ia. (30) 46.5 (1180) * up Material Vacuum Port 20: M4x0.7 30 thru 50: M6x1.0 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT 43 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information PTYS Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Shown are interchangable connectors & plugs for port connections. Interchangable* Pushlock Tube itting Mounting Thread. arb itting Plug * Not included with assembly ulkhead Level ompensator for P ups Vacuum ups PTYS Vacuum up ssemblies up iameter Vacuum Port TYS ssembly 1 2 Included in Kit (mm) ode Thread Part Number Stroke lbf (N) lbf (N) 10, 15 M5 TYS-5-3 3mm.11 (.49).13 (.59) M5x0.8 TYS-5-10 10mm.11 (.49).13 (.59) emale TYS-5-15 15mm.11 (.49).13 (.59) 20, 30, 40 M5 TYS-20-6 6mm.56 (2.5).79 (3.4) M5x0.8 TYS-20-15 15mm.56 (2.5) 1.2 (4.9) emale TYS-20-30 30mm.67 (2.9) 1.4 (5.9) 50 M5 TYS-50-6 6mm.56 (2.5).79 (3.4) M5x0.8 TYS-50-15 15mm.56 (2.5) 1.2 (4.9) emale TYS-50-30 30mm.67 (2.9) 1.4 (5.9) 75 N1 TYS-60-30 30mm 1.6 (6.8) 3.6 (15.6) 1/8 NPT TYS-60-50 50mm 1.9 (8.3) 4.5 (19.6) emale TYS-60-70 70mm 2.2 (9.5) 4.8 (21) 110, 150 N2 Model Number Index (old Items are Stocked) PTYS 10 3 NR M5 up iameter Stroke (mm) (mm) 10 (10) 15 (15) 3, 10, 15 20 (20) 30 (30) 40 (40) 6, 15, 30 50 (50) 75 (75) 30, 50, 70 110 (110) 150 (150) 20, 70 up Material Stocked NR Nitrile Rubber SI Silicone U Urethane vailable (onsult actory) NR Nitrile S R hloroprene SI Silicone S KM louro Rubber S igh Temp (old Items are Stocked) ompression orce 1/4 NPT TYS-120-20 20mm 3.6 (15.6) 6.8 (29) emale TYS-120-70 70mm 3.4 (14.7) 6.8 (29) 1 0% of Stroke Vacuum Ports M5 M5 N1 1/8 NPT N2 1/4 NPT See hart elow 2 100% of Stroke 44 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions PTYS103 thru PTYS1515 M5x0.8 M8x.75 SW12 M5x0.8 SW6.35 (9) PTYS206 thru PTYS5030 M5x0.8 M14x1 M5x0.8 SW12 SW19 SW17.20 (5) Vacuum ups PTYS Vacuum up ssemblies PTYS7530 N1: 1/8 NPT M22x1.5 N1: 1/8 NPT PTYS11020 thru PTYS15070 Model Wt Ø J Number oz (g) PTYS103*.39 (10) 2.42 (61.5).51 (13).31 (8).30 (7.5).12 (3).12 (3).91 (23).6 (18) PTYS1010*.39 (10) 2.70 (68.5).51 (13).31 (8).30 (7.5).39 (10).12 (3).91 (23).65 (18.5) PTYS1015*.39 (10) 3.19 (81).51 (13).31 (8).30 (7.5).59 (15).12 (3) 1.20 (30.5).7 (21) PTYS153*.59 (15) 2.52 (64).51 (13).31 (8).39 (10).12 (3).12 (3).91 (23).6 (18) PTYS1510*.59 (15) 2.80 (71).51 (13).31 (8).39 (10).39 (10).12 (3).91 (23).65 (18.5) PTYS1515*.59 (15) 3.29 (83.5).51 (13).31 (8).39 (10).59 (15).12 (3) 1.20 (30.5).7 (21) PTYS206*.79 (20) 3.54 (90).67 (17).39 (10).47 (12).24 (6).20 (5) 1.42 (36) 2.4 (67) PTYS2015*.79 (20) 3.90 (99).67 (17).39 (10).47 (12.59 (15).20 (5) 1.42 (36) 2.5 (72) PTYS2030*.79 (20) 5.36 (136).67 (17).39 (10).47 (12 1.18 (30).20 (5) 2.28 (58) 3.4 (97) PTYS306* 1.18 (30) 3.72 (94.5).67 (17).39 (10).67 (17).24 (6).20 (5) 1.42 (36) 2.5 (72) PTYS3015* 1.18 (30) 4.07 (103.5).67 (17).39 (10).67 (17).59 (15).20 (5) 1.42 (36) 3.4 (97) PTYS3030* 1.18 (30) 5.53 (140.5).67 (17).39 (10).67 (17) 1.18 (30).20 (5) 2.28 (58) 3.6 (102) PTYS406* 1.57 (40) 3.72 (94.5).67 (17).39 (10).61 (15.5).24 (6).20 (5) 1.42 (36) 2.8 (78) PTYS4015* 1.57 (40) 4.07 (103.5).67 (17).39 (10).61 (15.5).59 (15).20 (5) 1.42 (36) 2.9 (83) PTYS4030* 1.57 (40) 5.53 (140.5).67 (17).39 (10).61 (15.5) 1.18 (30).20 (5) 2.28 (58) 3.8 (108) PTYS506* 1.97 (50) 3.96 (100.5).67 (17).39 (10).78 (20).24 (6).20 (5) 1.42 (36) 3.3 (92) PTYS5015* 1.97 (50) 4.31 (109.5).67 (17).39 (10).78 (20).59 (15).20 (5) 1.42 (36) 3.4 (97) PTYS5030* 1.97 (50) 5.77 (146.5).67 (17).39 (10).78 (20) 1.18 (30).20 (5) 2.28 (58) 4.3 (122) PTYS7530* 2.95 (75) 7.01 (178) 1.28 (32.5).78 (20).87 (22) 1.77 (45).39 (10) 1.97 (50).47 (12) 12 (339) PTYS7550* 2.95 (75) 7.99 (203) 1.28 (32.5).78 (20).87 (22) 2.76 (70).39 (10) 1.97 (50).47 (12) 13 (373) PTYS7570* 2.95 (75) 8.98 (228) 1.28 (32.5).78 (20).87 (22) 3.74 (95).39 (10) 1.97 (50).47 (12) 14 (400) PTYS11020* 4.33 (110) 8.82 (224) 1.18 (30).71 (18) 1.14 (29) 1.38 (35).39 (10) 2.36 (60) 1.38 (35) 42 (1194) PTYS11070* 4.33 (110) 11.38 (289) 1.18 (30).71 (18) 1.14 (29) 3.94 (100).39 (10) 2.36 (60) 1.38 (35) 45 (1276) PTYS15020* 5.91 (150) 9.57 (243) 1.18 (30).71 (18) 1.50 (38) 1.38 (35).39 (10) 2.36 (60) 1.38 (35) 60 (1704) PTYS15070* 5.91 (150) 12.13 (308) 1.18 (30).71 (18) 1.50 (38) 3.94 (100).39 (10) 2.36 (60) 1.38 (35) 63 (1786) * up Material Vacuum Port SW19.28 (7) J SW30 SW24 N2: 1/4 NPT N2: 1/4 NPT M30x1.5 M8x1.25 SW26 SW36.31 (8) J 45 Parker annifin orporation ivision

atalog 0802-2/US eatures PJ Short ellows Vacuum ups PJ Series Vacuum ups Versatile bellow cup design provides increased sealing lip and level compensation for products with irregular, smooth, curved surfaces, or flexible sheets. PJTM Series Male Thread onnector Simple male connection for low profile positions secured to a plate or bracket. UN, NPT,, metric threads. Internal hex for easy assembly. itting Material: luminum. PJT Series emale Thread onnector Simple female connection for low profile positions secured to a plate or bracket. NPS, threads. Internal hex for easy assembly. itting Material: luminum. Vacuum ups PJ Vacuum ups eatures Short ellows for ast Response More Lip Seal ontact for orrugated, Textured Surfaces Soft Sealing Lip 6mm to 80mm pplications The short stroke bellow suction cup has an extra thin sealing edge and shorter stroke versus the traditional bellows for faster response. The cups are good for corrugated and smooth surfaces. PJTK Series arbed ulkhead Top stem connectors secured with jam nuts and allow tubing connections at the top side. Nickel plated brass materials. PJYK Series 90 arbed dapter Side stem connectors allow you to secure the stem with a bolt through a plate or L bracket to allow the tube connection from the side port. Nickel plated brass materials. PJTYS Series ulkhead Level ompensator 303 stainless steel construction secured with jam nuts. Spring biased compensators can absorb impacts of down-strokes and adjust for different levels of pick up points. 303 stainless corrosion resistant materials with drymet bushings increases the strength and life. 46 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information Model Number Index (ups Only) (old Items are Stocked) Specifications Suction up Material Vacuum ups PJ Vacuum ups PJ - 6 - NR up iameter (mm) 6 (6) 35 (35) 8 (8) 40 (40) 10 (10) 50 (50) 15 (15) 60 (60) 20 (20) 70 (70) 30 (30) 80 (80) up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) NR Nitrile S R hloroprene SI Silicone S U Urethane KM louro Rubber S igh Temp Z Markless NR NR R SI SI U KM S Z Nitrile Silicone louro Silicone Nitrile hloroprene Silicone Urethane Markless S* S* Rubber igh Temp Operating -20-30 -30-60 -60-30 -10-50 -10 Temperature ( ) to +120 to +120 to +140 to +250 to +250 to +120 to +230 to +300 to +230 lack / lack / lack / lack / olor lack reen White lue rey lue ot Red ot White ot Yellow ot ardness, 55 ±5 70 ±5 55 ±5 55 ±5 55 ±5 55 ±5 70 ±5 55 ±5 70 ±5 Shore ( Sh) lectrical 800 800 (Ωm) to 1000 to 1000 Wear Tear Strength ging Ozone asoline Oil cid lkali hemical Mechanical = excellent; = very good; = good; = medium; = poor; = not recommended * S: lectric Static issipative Material 47 Parker annifin orporation ivision

atalog 0802-2/US pplications & Technical ata pplication uide Short ellows igh Speed Packaging Main ata for Short ellows PJ ups Vacuum ups PJ Vacuum ups Lifting orce @ 60% (N) up Radius Model up iameter rea Volume (V) eflection (S) R Number cm 2 Liters mm (mm) PJ-6-*.24 (6).28 0.000016 1.70 4.2 4.0 PJ-8-*.31 (8).50 0.00007 3.10 4.0 5.0 PJ-10-*.39 (10) 0.79 0.00017 4.80 3.0 6.0 PJ-15-*.59 (15) 1.77 0.0005 10.8 3.3 10.0 PJ-20-*.79 (20) 3.14 0.0012 19.2 5.5 13.0 PJ-30-* 1.18 (30) 7.07 0.003 43.2 7.0 26.0 PJ-35-* 1.38 (35) 9.62 0.004 58.9 7.0 31.0 PJ-40-* 1.57 (40) 12.6 0.005 76.9 7.2 37.0 PJ-50-* 1.97 (50) 19.6 0.008 120 9.0 41.0 PJ-60-* 2.36 (60) 28.3 0.020 173 8.0 70.0 PJ-70-* 2.76 (70) 38.5 0.030 235 9.5 90.0 PJ-80-* 3.15 (80) 50.3 0.040 308 9.5 100.0 *up Material Volume V Level ompensation for Small lectronic omponents up eflection S lexible Product Soft Seal Lip Radius R 48 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions PJ-6 and PJ-8 PJ-20 PJ-50 * up Material Model Number Vacuum ups PJ Vacuum ups PJ-10 and PJ-15 PJ-30 thru PJ-40 PJ-60 thru PJ-80 M10x1.25 Ø Ø Ø Ø PJ-6-*.24 (6).16 (4).24 (6).30 (7.5).35 (9).17 (4.2).08 (2) PJ-8-*.31 (8).16 (4).24 (6).31 (8).35 (9).16 (4).08 (2) PJ-10-*.39 (10).18 (4.6).31 (7.8).43 (11).37 (9.5).12 (3).14 (3.5) PJ-15-*.59 (15).18 (4.6).31 (7.8).47 (12).43 (11).13 (3.3).14 (3.5) PJ-20-*.79 (20).18 (4.6).43 (10.8).59 (15).51 (13).22 (5.5).18 (4.5) PJ-30-* 1.18 (30).23 (5.8).43 (10.8).78 (20).71 (18).28 (7).28 (7) PJ-35-* 1.38 (35).23 (5.8).43 (10.8).98 (25).71 (18).28 (7).28 (7) PJ-40-* 1.57 (40).23 (5.8).43 (10.8) 1.18 (30).71 (18).28 (7.2).28 (7) PJ-50-* 1.97 (50).31 (7.8).78 (19.8) 1.57 (40).79 (20).35 (9).28 (7) PJ-60-* 2.36 (60).49 (12.5) 1.77 (45).89 (22.5).31 (8).10 (2.5) PJ-70-* 2.75 (70).49 (12.5) 2.17 (55).93 (23.5).37 (9.5).10 (2.5) PJ-80-* 3.15 (80).49 (12.5) 2.68 (68).93 (23.5).37 (9.5).10 (2.5) 49 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information PJTM Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Mounting Thread Tube I.. Male Threaded itting for PJ ups Vacuum ups PJTM Vacuum up ssemblies up iameter Mounting Mounting TM itting Included in Kit (mm) Thread ode Thread Part Number Min. Tube I 6, 8 Model Number Index (old Items are Stocked) PJTM - 8 - NR - M5 up iameter (mm) 6 (6) 50 (50) 8 (8) 60 (60) 30 (30) 70 (70) 35 (35) 80 (80) 40 (40) (old Items are Stocked) M5 M5x0.8 Male TM-5-M5 1 1/8 SPP Male TM-5-1 up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) NR Nitrile S R hloroprene SI Silicone S U Urethane KM louro Rubber S igh Temp Z Markless.157 (4) N1 1/8 NPT Male TM-20-N1 30, 35, 40 1 1/8 SPP Male TM-20-1.157 (4) M10 M10x1.25 Male TM-20-M10 N1 1/8 NPT Male TM-50-N1 50 1 1/8 SPP Male TM-50-1.157 (4) 2 1/4 SPP Male TM-50-2 N2 1/4 NPT Male TM-60-N2 60, 70, 80 2 1/4 SPP Male TM-60-2.25 (6.35) M10 M10x1.25 Male TM-60-M10 Mounting Thread M5 M5 N1 1/8 NPT 1 1/8 SPP M10 M10 N2 1/4 NPT 2 1/4 SPP See hart elow 50 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions PJTM-6 and PJTM-8 SW8 M5: M5 1: 1/8 SPP (6 & 8 Only) PJTM-60 thru PJTM-80 9/16" Vacuum ups PJTM Vacuum up ssemblies PJTM-30 thru PJTM-50 30 thru 40: 1/2" 50: 9/16" Model Ø Number (M5) (N1 / 1) (M10 / 2) (N2) PJTM-6-*-.24 (6).49 (12.5).18 (4.5).31 (8).14 (3.5) PJTM-8-*-.31 (8).49 (12.5).18 (4.5).31 (8).14 (3.5) PJTM-30-*- 1.18 (30).91 (23).31 (8).39 (10).20 (5) PJTM-35-*- 1.38 (35).91 (23).31 (8).39 (10).20 (5) PJTM-40-*- 1.57 (40).91 (23).31 (8).39 (10).20 (5) PJTM-50-*- 1.97 (50).98 (25).31 (8).39 (10).20 (5) PJTM-60-*- 2.36 (60) 1.06 (27).39 (10).59 (15).28 (7) PJTM-70-*- 3.74 (70) 1.10 (28).39 (10).59 (15).28 (7) PJTM-80-*- 3.74 (80) 1.10 (28).39 (10).59 (15).28 (7) * up Material Thread Size N2: 1/4 NPT 2: 1/4 SPP M10: 10x1.25 N1: 1/8 NPT 1: 1/8 SPP M10: 10x1.25 2: 1/4 SPP 51 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information PJT Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Mounting Thread Pipe Mounting Thread emale Threaded itting for PJ ups Vacuum ups PJT Vacuum up ssemblies Model Number Index (old Items are Stocked) PJT - 8 - NR - M5 up iameter (mm) 6 (6) 50 (50) 8 (8) 60 (60) 30 (30) 70 (70) 35 (35) 80 (80) 40 (40) Tube I.. up iameter Mounting Mounting T itting Included in Kit (mm) Thread ode Thread Part Number Min. Tube I 6, 8 M5 M5x0.8 emale T-5-M5.157 (4) N1 1/8 NPT emale T-20-N1 30, 35, 45 1 1/8 emale T-20-1.157 (4) M10 M10x1.25 emale T-20-M10 N1 1/8 NPT emale T-50-N1 50 1 1/8 emale T-50-1.157 (4) 2 1/4 emale T-50-2 60, 70, 80 (old Items are Stocked) N2 1/4 NPT emale T-60-N2 2 1/4 emale T-60-2 up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) NR Nitrile S R hloroprene SI Silicone S U Urethane KM louro Rubber S igh Temp Z Markless Mounting Thread M5 M5 N1 1/8 NPT 1 1/8 SPP M10 M10 N2 1/4 NPT 2 1/4 SPP See hart elow.25 (6.35) 52 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions PJT-6 and PJT-8 8mm M5x0.8 PJT-60 thru PJT-80 9/16" Model Number Ø PJT-6-*-.24 (6).55 (14).16 (4) PJT-8-*-.31 (8).55 (14).17 (4.2) PJT-30-*- 1.18 (30) 1.25 (32).28 (7) PJT-35-*- 1.18 (30) 1.25 (32).28 (7) PJT-40-*- 1.57 (40) 1.25(32).28 (7.2) PJT-50-*- 1.97 (50) 1.34 (34).35 (9) PJT-60-*- 2.36 (60) 1.56 (39.5).31 (8) PJT-70-*- 3.74 (70) 1.59 (40.5).37 (9.5) PJT-80-*- 3.74 (80) 1.59 (40.5).37 (9.5) * up Material Thread Size Vacuum ups PJT Vacuum up ssemblies PJT-30 thru PJT-50 N2: 1/4 NPT 2: 1/4 SPP 30 thru 40: 1/2" 50: 9/16" N1: 1/8 NPT 1: 1/8 SPP M10: 10x1.25 N2: 1/4 NPT 53 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information PJTK Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Mounting Thread. Tube I.. up Screw arbed ulkhead for PJ ups Vacuum ups PJTK Vacuum up ssemblies Model Number Index (old Items are Stocked) PJTK - 10 - NR - up iameter (mm) 6 (6) 35 (35) 8 (8) 40 (40) 10 (10) 50 (50) 15 (15) 60 (60) 20 (20) 70 (70) 30 (30) 80 (80) up iameter Vacuum Port TK itting Mounting Included in Kit (mm) ode Thread Part Number up Screw Only Thread Tube I (old Items are Stocked) up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) NR Nitrile S R hloroprene SI Silicone S U Urethane KM louro Rubber S igh Temp Z Markless Vacuum Port lank arb N1 1/8 NPT 1 1/8 SPP R1 1/8 SPT See hart elow 6, 8 lank arb TK-5 N/ M9x1.0 Male.157 (4) 10, 15 lank arb TK-15 P-15-M5 M8x1.25 Male.157 (4) 20 lank arb TK-20 P-20-M5 M8x1.25 Male.157 (4) 30, 35, 40 lank arb TK-25 P-25/40-M6 M10x1.5 Male.157 (4) 50 lank arb TK-50 P-50-M8 M10x1.5 Male.157 (4) N1 1/8 NPT TK-60-N1 N/ M16x1.5 Male N/ 60, 70, 80 1 1/8 SPP TK-60-1 N/ M16x1.5 Male N/ R1 1/8 SPT TK-60-R1 N/ M16x1.5 Male N/ 54 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions PJTK-6 and PJTK-8 PJTK-30 thru PJTK-50.197 ia. Ø (5) M9x1.0 SW12.197 ia. Ø (5) M10x1.5 M5x0.8 SW14.098 ia. Ø (2.5).118 ia. Ø (3) Vacuum ups PJTK Vacuum up ssemblies PJTK-10 thru PJTK-20 PJTK-60 thru PJTK-80 M16x1.5 SW21.197 ia. Ø (5) M8x1.25 SW12 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT Model Wt Ø Number oz (g) PJTK-6-*.24 (6) 1.30 (33).39 (10).55 (14).17 (4.2).47 (12).12 (3).4 (11) PJTK-8-*.31 (8) 1.30 (33).39 (10).55 (14).16 (4).47 (12).12 (3).4 (11) PJTK-10-*.39 (10) 1.87 (47.5).63 (16).87 (22).12 (3).59 (15).12 (3).5 (14) PJTK-15-*.59 (15) 1.93 (49).63 (16).87 (22).13 (3.3).59 (15).12 (3).5 (15) PJTK-20-*.79 (20) 2.01 (51).63 (16).87 (22).22 (5.5).59 (15).20 (5).6 (17) PJTK-30-* 1.18 (30) 2.60 (66).63 (16) 1.26 (32).28 (7).79 (20).20 (5) 1.5 (42) PJTK-35-* 1.38 (35) 2.60 (66).63 (16) 1.26 (32).28 (7).79 (20).20 (5) 1.6 (44) PJTK-40-* 1.57 (40) 2.60 (66).63 (16) 1.26 (32).28 (7.2).79 (20).20 (5) 1.6 (44) PJTK-50-* 1.97 (50) 2.68 (68).63 (16) 1.26 (32).35 (9).79 (20).20 (5) 25.0 (58) PJTK-60-*- 2.36 (60) 2.46 (62.5) 1.67 (42.5).31 (8).79 (20).24 (6) 5.1 (144) PJTK-70-*- 3.74 (70) 2.50 (63.5) 1.67 (42.5).37 (9.5).79 (20).24 (6) 5.7 (163) PJTK-80-*- 3.74 (80) 2.50 (63.5) 1.67 (42.5).37 (9.5).79 (20).24 (6) 6.7 (190) * up Material Vacuum Port.098 ia. Ø (2.5) 55 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information PJYK Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Tube I.. Mounting Thread up Screw 90 arbed dapter for PJ ups Vacuum ups PJYK Vacuum up ssemblies Model Number Index (old Items are Stocked) PJYK - 10 - NR - up iameter Vacuum Port YK itting Mounting Included in Kit (mm) ode Thread Part Number up Screw Only Thread Tube I up iameter (mm) 6 (6) 35 (35) 8 (8) 40 (40) 10 (10) 50 (50) 15 (15) 60 (60) 20 (20) 70 (70) 30 (30) 80 (80) (old Items are Stocked) up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) NR Nitrile S R hloroprene SI Silicone S U Urethane KM louro Rubber S igh Temp Z Markless Vacuum Port lank arb N1 1/8 NPT 1 1/8 SPP R1 1/8 SPT See hart elow 6, 8 lank arb YK-5 N/ M4x0.7 emale.157 (4) 10, 15 lank arb YK-15 P-15-M5 M4x0.7 emale.157 (4) 20 lank arb YK-20 P-20-M5 M4x0.7 emale.157 (4) 30, 35, 40 lank arb YK-25 P-25/40-M6 M6x1.0 emale.157 (4) 50 YK-50 P-50-M8 M6x1.0 emale.157 (4) N1 1/8 NPT YK-60-N1 N/ M8x1.25 emale N/ 60, 70, 80 1 1/8 SPP YK-60-1 N/ M8x1.25 emale N/ R1 1/8 SPT YK-60-R1 N/ M8x1.25 emale N/ 56 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions PJYK-6 and PJYK-8 PJYK-25 thru PJYK-50.197 ia. Ø (5).197 ia. Ø (5).118 ia. Ø (3).118 ia. Ø (3) M4x0.7 M6x1.0 Vacuum ups PJYK Vacuum up ssemblies PJYK-10 thru PJYK-20 PJYK-60 thru PJYK-80 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT Model Wt Ø Number oz (g) PJYK-6-*.24 (6) 1.24 (31.5).51 (13).89 (22.5).17 (4.2).24 (6).63 (16).56 (16) PJYK-8-*.31 (8) 1.24 (31.5).51 (13).89 (22.5).17 (4.2).24 (6).63 (16).56 (16) PJYK-10-*.39 (10) 1.24 (31.5).55 (14).87 (22).12 (3).24 (6).63 (16).59 (17) PJYK-15-*.59 (15) 1.30 (33).55 (14).87 (22).13 (3.3).24 (6).63 (16).63 (18) PJYK-20-*.79 (20) 1.38 (35).55 (14).87 (22).22 (5.5).24 (6).63 (16).7 (20) PJYK-30-* 1.18 (30) 1.97 (50).79 (20) 1.26 (32).28 (7).31 (8).63 (16) 1.6 (46) PJYK-35-* 1.38 (35) 1.97 (50).79 (20) 1.26 (32).28 (7).31 (8).63 (16) 1.7 (48) PJYK-40-* 1.57 (40) 1.97 (50).79 (20) 1.26 (32).28 (7.2).31 (8).63 (16) 1.7 (48) PJYK-50-* 1.97 (50) 2.05 (52).79 (20) 1.26 (32).35 (9).31 (8).63 (16) 2.2 (62) PJYK-60-*- 2.36 (60) 2.46 (62.5) 1.10 (28) 1.67 (42.5).31 (8).43 (11) 4.9 (139) PJYK-70-*- 3.74 (70) 2.50 (63.5) 1.10 (28) 1.67 (42.5).37 (9.5).43 (11) 5.6 (158) PJYK-80-*- 3.74 (80) 2.50 (63.5) 1.10 (28) 1.67 (42.5).37 (9.5).43 (11) 6.5 (185) * up Material Vacuum Port.197 ia. Ø (5).118 ia. Ø (3) M8x1.25 M4x0.7 57 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information PJTYS Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Shown are interchangable connectors & plugs for port connections. Interchangable* Pushlock Tube itting Mounting Thread. arb itting Plug * Not included with assembly ulkhead Level ompensator for PJ ups Vacuum ups PJTYS Vacuum up ssemblies Model Number Index (old Items are Stocked) PJTYS 10 3 NR M5 up iameter Stroke (mm) (mm) 6 (6) 8 (8) 3, 10, 15 10 (10) 15 (15) 20 (20) 30 (30) 35 (35) 6, 15, 30 40 (40) 50 (50) 60 (60) 70 (70) 30, 50, 70 80 (80) up iameter Vacuum Port TYS & JTYS ssembly 1 2 Included in Kit (mm) ode Thread Part Number Stroke lbf (N) lbf (N) TYS-5-3 3mm.11 (.49).13 (.59) M5x0.8 6, 8 M5 TYS-5-10 10mm.14 (.61).26 (1.17) emale TYS-5-15 15mm.15 (.64).26 (1.17) 10, 15 M5 JTYS-10-3 3mm.11 (.49).13 (.59) M5x0.8 JTYS-10-10 10mm.56 (2.5) 1.2 (4.9) emale JTYS-10-15 15mm.67 (2.9) 1.4 (5.9) 20 M5 JTYS-20-6 6mm.56 (2.5).79 (3.4) M5x0.8 JTYS-20-15 15mm.56 (2.5) 1.2 (4.9) emale JTYS-20-30 30mm.67 (2.9) 1.4 (5.9) 30, 35, 40 M5 TYS-20-6 6mm.56 (2.5).79 (3.4) M5x0.8 TYS-20-15 15mm.56 (2.5) 1.2 (4.9) emale TYS-20-30 30mm.67 (2.9) 1.4 (5.9) 50 M5 TYS-50-6 6mm.56 (2.5).79 (3.4) M5x0.8 TYS-50-15 15mm.56 (2.5) 1.2 (4.9) emale TYS-50-30 30mm.67 (2.9) 1.4 (5.9) 60, 70, 80 N1 1/8 NPT emale up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) NR Nitrile S R hloroprene SI Silicone S U Urethane KM louro Rubber S igh Temp Z Markless (old Items are Stocked) ompression orce TYS-60-30 30mm 1.6 (6.8) 3.6 (15.6) TYS-60-50 50mm 1.9 (8.3) 4.5 (19.6) TYS-60-70 70mm 2.2 (9.5) 4.8 (21) 1 0% of Stroke Vacuum Port M5 M5 N1 1/8 NPT See hart elow 2 100% of Stroke 58 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions PJTYS63 thru PJTYS815 M5x0.8 M8x0.75 SW12 M5x0.8 SW6.35 (9) Vacuum ups PJTYS Vacuum up ssemblies PJTYS103 thru PJTYS2030 M5x0.8 M8x0.75 M5x0.8 SW6 PJTYS-10/15.35 (9) PJTYS 20/25.20 (5) Model Wt Ø Number oz (g) PJTYS63*.24 (6) 2.24 (57).51 (13).31 (8).17 (4.2).12 (3).12 (3).91 (23).2 (7) PJTYS610*.24 (6) 2.52 (64).51 (13).31 (8).17 (4.2).39 (10).12 (3).91 (23).3 (9) PJTYS615*.24 (6) 3.01 (76.5).51 (13).31 (8).17 (4.2).59 (15).12 (3) 1.20 (30.5).4 (11) PJTYS83*.31 (8) 2.24 (57).51 (13).31 (8).16 (4).12 (3).12 (3).91 (23).2 (7) PJTYS810*.31 (8) 2.52 (64).51 (13).31 (8).16 (4).39 (10).12 (3).91 (23).3 (9) PJTYS815*.31 (8) 3.01 (76.5).51 (13).31 (8).16 (4).59 (15).12 (3) 1.20 (30.5).4 (11) PJTYS103*.39 (10) 2.24 (57).51 (13).31 (8).12 (3).12 (3).20 (5).91 (23) 1.0 (30.5) PJTYS1010*.39 (10) 2.52 (64).51 (13).31 (8).12 (3).39 (10).20 (5).91 (23) 1.1 (31) PJTYS1015*.39 (10) 3.01 (76.5).51 (13).31 (8).12 (3).59 (15).20 (5) 1.20 (30.5) 1.2 (33.5) PJTYS153*.59 (15) 2.32 (59).51 (13).31 (8).13 (3.3).12 (3).20 (5).91 (23) 1.1 (31) PJTYS1510*.59 (15) 2.60 (66).51 (13).31 (8).13 (3.3).39 (10).20 (5).91 (23) 1.1 (32) PJTYS1515*.59 (15) 3.07 (78).51 (13).31 (8).13 (3.3).59 (15).20 (5) 1.20 (30.5) 1.3 (34.5) PJTYS206*.79 (20) 2.72 (69).67 (17).39 (10).22 (5.5).24 (6).20 (5) 1.42 (36) 2.3 (66) PJTYS2015*.79 (20) 3.07 (78).67 (17).39 (10).22 (5.5).59 (15).20 (5) 1.42 (36) 2.5 (71) PJTYS2030*.79 (20) 4.53 (115).67 (17).39 (10).22 (5.5) 1.18 (30).20 (5) 2.28 (58) 3.4 (96) ** up Material Vacuum Port SW12 59 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions PJTYS306 thru PJTYS5030 M14x1 M5x0.8 M5x0.8 Vacuum ups PJTYS Vacuum up ssemblies Model Wt Ø J Number oz (g) PJTYS306* 1.18 (30) 3.23 (82).67 (17).39 (10).28 (7).24 (6).20 (5) 1.42 (36) 2.4 (69) PJTYS3015* 1.18 (30) 3.58 (91).67 (17).39 (10).28 (7).59 (15).20 (5) 1.42 (36) 2.6 (74) PJTYS3030* 1.18 (30) 5.04 (128).67 (17).39 (10).28 (7) 1.18 (30).20 (5) 2.28 (58) 3.5 (99) PJTYS356* 1.38 (35) 3.23 (82).67 (17).39 (10).28 (7).24 (6).20 (5) 1.42 (36) 2.5 (71.5) PJTYS3515* 1.38 (35) 3.58 (91).67 (17).39 (10).28 (7).59 (15).20 (5) 1.42 (36) 2.7 (76.5) PJTYS3530* 1.38 (35) 5.04 (128).67 (17).39 (10).28 (7) 1.18 (30).20 (5) 2.28 (58) 3.6 (101.5) PJTYS406* 1.57 (40) 3.23 (82).67 (17).39 (10).28 (7.2).24 (6).20 (5) 1.42 (36) 2.6 (73.5) PJTYS4015* 1.57 (40) 3.58 (91).67 (17).39 (10).28 (7.2).59 (15).20 (5) 1.42 (36) 2.8 (78.5) PJTYS4030* 1.57 (40) 5.04 (128).67 (17).39 (10).28 (7.2) 1.18 (30).20 (5) 2.28 (58) 3.7 (103.5) PJTYS506* 1.97 (50) 3.31 (84).67 (17).39 (10).35 (9).24 (6).20 (5) 1.42 (36) 3.1 (89) PJTYS5015* 1.97 (50) 3.66 (93).67 (17).39 (10).35 (9).59 (15).20 (5) 1.42 (36) 3.3 (94) PJTYS5030* 1.97 (50) 5.12 (130).67 (17).39 (10).35 (9) 1.18 (30).20 (5) 2.28 (58) 4.2 (119) ** up Material Vacuum Port SW12 SW19 SW17.20 (5) 60 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions PJTYS6030 thru PJTYS8070 N1: 1/8 NPT M22x1.5 N1: 1/8 NPT Vacuum ups PJTYS Vacuum up ssemblies Model Wt Ø J Number oz (g) PJTYS6030* 3.74 (60) 6.18 (157) 1.18 (30).79 (20).31 (8) 1.18 (45).39 (10) 1.97 (50).47 (12) 10.4 (294) PJTYS6050* 3.74 (60) 7.17 (182) 1.18 (30).79 (20).31 (8) 2.76 (70).39 (10) 1.97 (50).47 (12) 11.6 (328) PJTYS6070* 3.74 (60) 8.15 (207) 1.18 (30).79 (20).31 (8) 3.74 (95).39 (10) 1.97 (50).47 (12) 12.5 (355) PJTYS7030* 4.72 (70) 6.22 (158) 1.18 (30).79 (20).37 (9.5) 1.18 (45).39 (10) 1.97 (50).47 (12) 10.9 (309) PJTYS7050* 4.72 (70) 7.20 (183) 1.18 (30).79 (20).37 (9.5) 2.76 (70).39 (10) 1.97 (50).47 (12) 12.2 (346) PJTYS7070* 4.72 (70) 8.19 (208) 1.18 (30).79 (20).37 (9.5) 3.74 (95).39 (10) 1.97 (50).47 (12) 13.1 (370) PJTYS8030* 5.91 (80) 6.22 (158) 1.18 (30).79 (20).37 (9.5) 1.18 (45).39 (10) 1.97 (50).47 (12) 11.9 (338) PJTYS8050* 5.91 (80) 7.20 (183) 1.18 (30).79 (20).37 (9.5) 2.76 (70).39 (10) 1.97 (50).47 (12) 13.1 (372) PJTYS8070* 5.91 (80) 8.19 (208) 1.18 (30).79 (20).37 (9.5) 3.74 (95).39 (10) 1.97 (50).47 (12) 14.1 (399) ** up Material Vacuum Port SW19.28 (7) SW30 SW24 J 61 Parker annifin orporation ivision

atalog 0802-2/US eatures P Multiple ellows Vacuum ups P Series Vacuum ups 2-1/2 bellows design minimizes contact pressure applied to the product. The soft seal lip and touch allows the cup to conform to the product s surface to make a vacuum seal. PTM Series Male Thread onnector Simple male connection for low profile positions secured to a plate or bracket. UN, NPT,, metric threads. Internal hex for easy assembly. itting Material: luminum. PT Series emale Thread onnector Simple female connection for low profile positions secured to a plate or bracket. NPS, threads. Internal hex for easy assembly. itting Material: luminum. Vacuum ups P Vacuum ups eatures Soft Touch xtra Level ompensation lexible Sealing Lip for Irregular urved Surfaces 5mm to 90mm in iameter pplications These multiple bellow cups are designed for applications that require additional level compensation, more flexibility, or minimum back pressure for a soft touch. The multiple bellow has a soft sealing edge good for a variety of sensitive applications; such as food packaging, / V, medical packaging, and highly irregular curved surfaces. ups can also be used to assist with sheet separation in destack operations. PTK Series arbed ulkhead Top stem connectors secured with jam nuts and allow tubing connections at the top side. Nickel plated brass materials. PYK Series 90 arbed dapter Side stem connectors allow you to secure the stem with a bolt through a plate or L bracket to allow the tube connection from the side port. Nickel plated brass materials. 62 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information Model Number Index (ups Only) (old Items are Stocked) Specifications Suction up Material up iameter (mm) 5 (5) 30 (30) 7 (7) 40 (40) 10 (10) 60 (60) 15 (15) 90 (90) 20 (20) Vacuum ups P Vacuum ups P - 5 - NR up Material Standard NR Nitrile Rubber SI Silicone vailable (onsult actory) NR Nitrile S R hloroprene U Urethane SI Silicone S KM louro Rubber S igh Temp NR NR R SI SI U KM S Nitrile Silicone louro Silicone Nitrile hloroprene Silicone Urethane S* S* Rubber igh Temp Operating -20-30 -30-60 -60-30 -10-50 Temperature ( ) to +120 to +120 to +140 to +250 to +250 to +120 to +230 to +300 lack / reen or lack/ lack / lack / olor lack White lue rey lue ot reen ot Red ot White ot ardness, 55 ±5 70 ±5 55 ±5 55 ±5 55 ±5 55 ±5 70 ±5 55 ±5 Shore ( Sh) lectrical 800 800 (Ωm) to 1000 to 1000 Wear Tear Strength ging Ozone asoline Oil cid lkali hemical Mechanical = excellent; = very good; = good; = medium; = poor; = not recommended * S: lectric Static issipative Material 63 Parker annifin orporation ivision

atalog 0802-2/US pplications & Technical ata pplication uide 2-1/2 ellows estack Perimeter Separation Main ata for 2-1/2 ellows PJ ups Vacuum ups P Vacuum ups Lifting orce @ 60% (N) up Radius Model up iameter rea Volume (V) eflection (S) R Number cm 2 Liters mm (mm) P-5-*.20 (5).20.00003 1.20 3 3.5 P-7-*.28 (7).39.00004 2.40 3 4.0 P-10-*.39 (10) 0.79.0001 4.80 3 5.0 P-15-*.59 (15) 1.77.0009 10.8 10 6.0 P-20-*.79 (20) 3.14.002 19.2 10 8.0 P-30-* 1.18 (30) 7.07.009 43.2 14.5 20.0 P-40-* 1.57 (40) 12.6.018 76.9 22 30.0 P-60-* 2.36 (60) 28.3.072 173 27 55.0 P-90-* 3.54 (90) 63.6.1639 389 42 80.0 * up Material Volume V Level ompensation for applications where Level ompensators do not have adequate space up eflection S ontrolling downstroke lifts product on contact Radius R 64 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions P-5 and P-7 P-30 thru P-60 * up Material Model Number J J Vacuum ups P Vacuum ups P-10 thru P-20 P-90 Ø Ø Ø Ø J P-5-*.20 (5).16 (4).08 (2).30 (7.5).37 (9.5).12 (3).16 (4).08 (2).24 (6) P-7-*.28 (7).16 (4).08 (2).30 (7.5).39 (10).12 (3).16 (4).08 (2).24 (6) P-10-*.35 (9).20 (5).59 (15).12 (3).28 (7).35 (9) P-15-*.60 (15.2).20 (5).90 (22).39 (10).35 (9).39 (10) P-20-*.79 (20).20 (5).91 (23).39 (10).35 (9).39 (10) P-30-* 1.26 (32).31 (8) 1.48 (37.5).57 (14.5).67 (17).51 (13).71 (18) P-40-* 1.65 (42).31 (8) 1.81 (46).87 (22).67 (17).51 (13).79 (20) P-60-* 2.44 (62).31 (8) 2.17 (55) 1.06 (27).71 (18).51 (13).85 (21.5) P-90-* 3.46 (88).47 (12) 3.44 (87.5) 1.65 (42) 1.02 (26).79 (20.98 (25) J J 65 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information PTM Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent Mounting vacuum leakage. Thread. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Tube I.. Male Threaded itting for P ups Vacuum ups PTM Vacuum up ssemblies Model Number Index (old Items are Stocked) PTM - 5 - NR - M5 up iameter Mounting Mounting TM & TM itting Included in Kit (mm) Thread Thread ode Part Number Min. Tube I 5, 7 M5 M5x0.8 Male TM-5-M5.098 (2.5mm) M5 M5x0.8 Male TM-10-M5 10, 15, 20 N1 1/8 NPT Male TM-10-N1.156 (4mm) 1 1/8 SPP Male TM-10-1 N1 1/8 NPT Male TM-30-N1 30, 40, 60 1 1/8 SPP Male TM-30-1.25 (6.35mm) 2 1/4 SPP Male TM-30-2 90 up iameter (mm) 5 (5) 30 (30) 7 (7) 40 (40) 10 (10) 60 (60) 15 (15) 90 (90) 20 (208) (old Items are Stocked) N2 1/4 NPT Male TM-90-N2 2 1/4 SPP Male TM-90-2 up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) NR Nitrile S R hloroprene U Urethane SI Silicone S KM louro Rubber S igh Temp Mounting Thread M5 M5 N1 1/8 NPT 1 1/8 SPP N2 1/4 NPT 2 1/4 SPP See hart elow.31 (8mm) 66 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions PTM-5 and PTM-7 PTM-30 thru PTM-60 1/2" SW8 M5: M5 N1: 1/8 NPT 1: 1/8 SPP 2: 1/4 SPP Vacuum ups PTM Vacuum up ssemblies PTM-10 thru PTM-20 PTM-90 5/16" M5: M5 N1: 1/8 NPT 1: 1/8 SPP Model Ø Number (M5) (N1 / 1) M10 / 2) (N2) PTM-5-*-.20 (5).51 (13).18 (4.5).14 (3.5).12 (3) PTM-7-*-.28 (7).53 (13.5).18 (4.5).14 (3.5).12 (3) PTM-10-*-.35 (9).69 (17.5).18 (4.5).31 (8).10 (2.5).12 (3) PTM-15-*-.60 (15.2) 1.04 (25.5).18 (4.5).31 (8).10 (2.5).39 (10) PTM-20-*-.79 (20) 1.04 (25.5).18 (4.5).31 (8).10 (2.5).39 (10) PTM-30-*- 1.26 (32) 1.67 (42.5).31 (8).39 (10).20 (5).57 (14.5) PTM-40-*- 1.65 (42) 2.01 (51).31 (8).39 (10).20 (5).87 (22) PTM-60-*- 2.44 (62) 2.36 (60).31 (8).39 (10).20 (5) 1.06 (27) PTM-90-*- 3.46 (88) 3.64 (92.5).39 (10).59 (15).20 (5) 1.65 (42) * up Material Thread Size N2: 1/4 NPT 2: 1/4 SPP 9/16" 67 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information PT Vacuum up ssemblies Installation Mounting Pipe I.. Mounting Thread emale Threaded itting for P ups Vacuum ups PT Vacuum up ssemblies up iameter Mounting Mounting T & T itting Included in Kit (mm) Thread Thread ode Part Number Min. Tube I 5, 7 M5 M5x0.8 emale T-5-M5.098 (2.5mm) 10, 15, 20 N1 1/8 NPT emale T-10-N1 1 1/8 SPP emale T-10-1.156 (4mm) N1 1/8 NPT emale T-30-N1 30, 40, 60 1 1/8 SPP emale T-30-1.25 (6.35mm 2 1/4 SPP emale T-30-2 90 Mounting Thread Tube I.. Model Number Index (old Items are Stocked) PT - 5 - NR - M5 up iameter (mm) 5 (5) 30 (30) 7 (7) 40 (40) 10 (10) 60 (60) 15 (15) 90 (90) 20 (20) Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. (old Items are Stocked) N2 1/4 NPT emale T-90-N2 2 1/4 SPP emale T-90-2 up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) NR Nitrile S R hloroprene U Urethane SI Silicone S KM louro Rubber S igh Temp.31 (8) Mounting Thread M5 M5 N1 1/8 NPT 1 1/8 SPP N2 1/4 NPT 2 1/4 SPP See hart elow 68 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions PT-5 and PT-7 PT-30 thru PT-60 1/2" SW8 M5 PT-10 thru PT-20 Model Number Ø PT5*.20 (5).85 (21.5).47 (12).31 (8).12 (3) PT7*.28 (7).87 (22).47 (12).31 (8).12 (3) PT10*.35 (9) 1.06 (27).47 (12).31 (8).12 (3) PT15*.60 (15.2) 1.38 (35).47 (12).31 (8).39 (10) PT20*.79 (20) 1.38 (35).47 (12).31 (8).39 (10) PT30* 1.26 (32) 2.03 (51.5).55 (14).31 (8).57 (14.5) PT40* 1.65 (42) 2.36 (60).55 (14).31 (8).87 (22) PT60* 2.44 (62) 2.72 (69).55 (14).31 (8) 1.06 (27) PT90* 3.46 (88) 4.13 (105).69 (17.5).39 (10) 1.65 (42) * up Material Thread Size N1: 1/8 NPT 1: 1/8 SPP 2: 1/4 SPP Vacuum ups PT Vacuum up ssemblies PT-90 9/16" 1/2" N1: 1/8 NPT 1: 1/8 SPP N2: 1/4 NPT 2: 1/4 SPP 69 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information PTK Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Mounting Thread Tube I.. up Screw arbed ulkhead for P ups Vacuum ups PTK Vacuum up ssemblies Model Number Index (old Items are Stocked) PTK - 5 - NR - up iameter Vacuum Port TK & TK itting up Screw Mounting Included in Kit (mm) ode Thread Part Number Only Thread Tube I up iameter (mm) 5 (5) 30 (30) 7 (7) 40 (40) 10 (10) 60 (60) 15 (15) 90 (90) 20 (20) (old Items are Stocked) up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) NR Nitrile S R hloroprene U Urethane SI Silicone S KM louro Rubber S igh Temp Vacuum Port lank arb N1 1/8 NPT 1 1/8 SPP R1 1/8 SPT See hart elow 5, 7 lank arb TK-5 N/ M9x1 Male.156 (4) 10, 15, 18, 20 lank arb TK-10 P-10-M5 M8x1.25 Male.156 (4) 30, 40, 60 lank arb TK-30 P-30-M8 M10x1.5 Male.156 (4) N1 1/8 NPT TK-90-N1 90 1 1/8 SPP TK-90-1 P-90-M12 M16x1.5 Male N/ R1 1/8 SPT TK-90-R1 70 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions PTK-5 and PTK-7 PTK-90.197 ia. Ø (5) M9x1.0 SW12 M16x1.5 SW21 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT.098 ia. Ø (2.5) N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT PTK-10 thru PTK-20.197 ia. Ø (5) M8x1.25 SW12 Vacuum ups PTK Vacuum up ssemblies.118 ia. Ø (3) PTK-30 thru PTK -60 Model Wt Ø Number oz. (g) PTK-5-*.20 (5) 1.32 (33.5).39 (10).55 (14).12 (3).47 (12).12 (3).56 (11) PTK-7-*.28 (7) 1.34 (34).39 (10).55 (14).12 (3).47 (12).12 (3).56 (11) PTK-10-*.35 (9) 2.21 (56.2).63 (16).88 (22.5).12 (3).59 (15).16 (4).78 (22) PTK-15-*.60 (15.2) 2.53 (64.2).63 (16).86 (22).39 (10).59 (15).16 (4).78 (22) PTK-20-*.79 (20) 2.53 (64.2).63 (16).86 (22).39 (10).59 (15).16 (4).78 (22) PTK-30-* 1.26 (32) 3.42 (86.8).63 (16) 1.26 (32).57 (14.5).79 (20).20 (5) 1.62 (46) PTK-40-* 1.65 (42) 3.75 (95.3).63 (16) 1.26 (32).86 (22).79 (20).20 (5) 1.94 (55) PTK-60-* 2.44 (62) 4.11 (104.3).63 (16) 1.26 (32) 1.06 (27).79 (20).20 (5) 3.00 (85) PTK-90-*- 3.46 (88) 5.70 (144.8) 1.67 (42.5) 1.65 (42).91 (23).24 (6) 10.58 (300) * up Material Vacuum Port.197 ia. Ø (5) M10x1.5 M5x0.8 SW14.118 ia. Ø (3) 71 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information PYK Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Mounting Thread Tube I.. up Screw 90 arbed dapter for P ups Vacuum ups PYK Vacuum up ssemblies Model Number Index (old Items are Stocked) PYK - 5 - NR - up iameter Vacuum Port YK & YK itting up Screw Mounting Included in Kit (mm) ode Thread Part Number Only Thread Tube I up iameter (mm) 5 (5) 30 (30) 7 (7) 40 (40) 10 (10) 60 (60) 15 (15) 90 (90) 20 (20) (old Items are Stocked) up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) NR Nitrile S R hloroprene U Urethane SI Silicone S KM louro Rubber S igh Temp Vacuum Port lank arb N1 1/8 NPT 1 1/8 SPP R1 1/8 SPT See hart elow 5, 7 lank arb YK-5 N/ M4x0.7 emale.156 (4) 10, 15, 20 lank arb YK-10 P-10-M5 M4x0.7 emale.156 (4) 30, 40, 60 lank arb YK-30 P-30-M8 M6x1.0 emale.156 (4) N1 1/8 NPT YK-90-N1 90 1 1/8 SPP YK-90-1 P-90-M12 M16x1.5 emale N/ R1 1/8 SPT YK-90-R1 72 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions PYK-5 and PYK-7.197 ia. Ø (5) PYK-30 thru PYK-60.118 ia. Ø (3).197 ia. Ø (5).118 ia. Ø (3) M4x0.7 M6x1.0 Vacuum ups PYK Vacuum up ssemblies PYK-10 thru PYK-20 PYK-90.197 ia. Ø (5).118 ia. Ø (3) M16x1.5 SW21 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT Model Wt Ø Number oz. (g) PYK-5-*.20 (5) 1.26 (32).51 (13).89 (22.5).12 (3).24 (6).63 (16).56 (16) PYK-7-*.28 (7) 1.28 (32.5).51 (13).89 (22.5).12 (3).24 (6).63 (16).56 (16) PYK-10-*.35 (9) 1.58 (40.2).55 (14).87 (22).12 (3).24 (6).63 (16).78 (22) PYK-15-*.60 (15.2) 1.90 (48.2).55 (14).87 (22).39 (10).24 (6).63 (16).78 (22) PYK-20-*.79 (20) 1.90 (48.2).55 (14).87 (22).39 (10).24 (6).63 (16).78 (22) PYK-30-* 1.26 (32) 2.79 (70.8).79 (20) 1.26 (32).57 (14.5).31 (8).63 (16) 1.62 (46) PYK-40-* 1.65 (42) 3.12 (79.3).79 (20) 1.26 (32).87 (22).31 (8).63 (16) 1.94 (55) PYK-60-* 2.44 (62) 3.48 (88.3).79 (20) 1.26 (32) 1.06 (27).31 (8).63 (16) 3.00 (85) PYK-90-* 3.46 (88) 5.70 (144.8).91 (23) 2.17 (55) 1.65 (42).43 (11) 10.58 (300) * up Material Thread Size M4x0.7 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT 73 Parker annifin orporation ivision

atalog 0802-2/US eatures PK utomotive Vacuum ups PK Series Vacuum ups The PK is a single edge deep cup for products with a radius. The PK is a single lip design with a grooved foot pattern to prevent vacuum from deforming thin products. The PKJ is a single bellow cup designed to work with flexible and curved products. ll of these designs incorporate a grooved and textured underside to increase frictional and holding forces. The cup assembly has a variety of connector designs to replace only the cup to minimize operating expenses. PK emale dapter Series Simple female connection for low profile positions secured to a plate or bracket. Male screw to secure cup has an internal hex for easy assembly. itting Material: luminum. PKT dapter Series Simple adapter connection for low profile positions secured to a plate or bracket. Male screw to secure cup has an internal hex for easy assembly. itting Material: luminum. O-Ring-210 una. PK emale dapter Series Simple female connection for low profile positions secured to a plate or bracket. Male screw to secure cup has an internal hex for easy assembly. itting Material: luminum. Vacuum ups PK Vacuum ups eatures lat esign To Prevent eforming Product up Replacement Simplied Recyclable Rubber Lower Maintenace ost Soft urometers Silicon ree 40mm to 110mm iameters pplications The PK ups are well suited for all operations within automotive manufacturing; sheet metal destack, body assembly, press transfer, final assembly, fixtures. PKT dapter Series Simple adapter connection for low profile positions secured to a plate or bracket. Male screw to secure cup has an internal hex for easy assembly. itting Material: luminum. O-Ring-210 una. PKJ emale dapter Series Simple female connection for low profile positions secured to a plate or bracket. Male screw to secure cup has an internal hex for easy assembly. itting Material: luminum. PKJT dapter Series Simple adapter connection for low profile positions secured to a plate or bracket. Male screw to secure cup has an internal hex for easy assembly. itting Material: luminum. O-Ring-210 una. 74 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information Vacuum ups PK, PK, PKJ Vacuum ups Model Number Index (ups Only) ( old Items are Stocked) PK - 60 - NR PK - 75 - NR up iameter (mm) 60 (60) 75 (75) 100 (100) PK Specifications up Material Stocked NR Nitrile Rubber vailable (onsult actory) U Urethane Suction up NR U Material Nitrile Urethane Operating -20-30 Temperature ( ) to +120 to +120 olor lack lue PK ardness, 55 ±5 55 ±5 Shore ( Sh) Wear Tear Strength ging Ozone asoline Oil cid lkali hemical Mechanical = excellent; = very good; = good; = medium; = poor; = not recommended up iameter (mm) 75 (75) 100 (100) up Material Stocked NR Nitrile Rubber vailable (onsult actory) U Urethane PKJ - 40 - NR up iameter (mm) 40 (40) 50 (50) 60 (60 80 (80) 110 (110) PKJ up Material Stocked NR Nitrile Rubber vailable (onsult actory) U Urethane 75 Parker annifin orporation ivision

atalog 0802-2/US pplications & Technical ata pplication uide eep up for xternal urves Slip Resistant oot Pattern Main ata for PKJ Suction ups Vacuum ups PK, PK, PKJ Vacuum ups Lifting orce @ 60% (N) up Radius Model up iameter rea Volume (V) eflection (S) R Number cm 2 Liters (mm) (mm) PK-60-* 2.36 (60) 28.3.06 173 86.5 9 60 PK-75-* 2.95 (75) 44.2.07 270 135 13 100 PK-100-* 3.94 (100) 78.5.09 480 240 17.3 150 PK-75-* 2.95 (75) 44.2.03 270 65.0 5 140 PK-100-* 3.94 (100) 78.5.05 480 113 8 200 PKJ-40-* 1.57 (40) 12.6.02 76.9 10.5 30 PKJ-50-* 1.98 (50) 19.6.03 120 19 40 PKJ-60-* 2.36 (60) 28.3.04 173 14 52 PKJ-80-* 3.15 (80) 50.3.05 308 17 70 PKJ-110-* 4.33 (110) 95.0.07 581 23 130 * up Material PK Main ata for PK Suction ups Volume Volume V V Main ata for PK Suction ups Volume V No eformation Thin lat Sheets Slip Resistant oot Pattern PK up eflection S up eflection S up eflection S ellows for ny urves Slip Resistant oot Pattern PKJ Radius R Radius R Radius R 76 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions PK-60 thru PK-100 PK-100 Model Number * up Material Vacuum ups PK, PK, PKJ Vacuum ups PK-75 PKJ-40 thru PKJ-110 Ø Ø Ø Ø PK-60-* 2.36 (60).73 (18.5) 1.10 (28) 1.57 (40) 1.22 (31).35 (9).12 (3).35 (9) PK-75-* 2.95 (75).73 (18.5) 1.10 (28) 1.57 (40) 1.26 (32).51 (13).12 (3).35 (9) PK-100-* 3.94 (100).73 (18.5) 1.10 (28) 1.57 (40) 1.54 (39).68 (17.3).16 (4).35 (9) PK-75-* 2.95 (75).73 (18.5) 1.10 (28) 1.57 (40) 1.26 (32).20 (5).12 (3).35 (9) PK-100-* 3.94 (100).73 (18.5) 1.10 (28) 1.57 (40) 1.54 (39).31 (8).16 (4).35 (9) PKJ-40-* 1.57 (40).73 (18.5) 1.10 (28) 1.57 (40) 1.38 (35).41 (10.5).37 (9.5) PKJ-50-* 1.98 (50).73 (18.5) 1.10 (28) 1.57 (40) 1.38 (35).75 (19).35 (9) PKJ-60-* 2.36 (60).73 (18.5) 1.10 (28) 1.57 (40) 1.38 (35).55 (14).35 (9) PKJ-80-* 3.15 (80).73 (18.5) 1.10 (28) 1.57 (40) 1.54 (39).67 (17).35 (9) PKJ-110-* 4.33 (110).73 (18.5) 1.10 (28) 1.57 (40) 1.98 (50).91 (23).35 (9) 77 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information & imensions PK Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. emale dapter for PK ups PK-60 thru PK-100 Model Number Ø PK-60-*- 2.36 (60) 1.85 (46.9) 1.10 (28) 1.81 (46).35 (9) PK-75-*- 2.95 (75) 1.88 (47.8) 1.10 (28) 1.81 (46).51 (13) PK-100-*- 3.94 (100) 2.16 (54.9) 1.10 (28) 1.81 (46).68 (17.3) * up Material Thread Size Vacuum ups PK Vacuum up ssemblies up iameter (mm) 60 (60) 75 (75) 100 (100) dapter omponents dapter Part Numbers Thread Sizes escription TN-PK--N3 emale 3/8 NPT emale Port TN-PK--3 3/8 SPP emale Port ap TN-PK-100-M10 M10x1.5 Male Screw PK--6710 ap Male imensions Pipe I.. Mounting Thread Model Number Index (old Items are Stocked) PK - 60 - NR - N3 Note: Simply remove the hex keyed male screw to replace cup. ex Key Size: 8mm (old Items are Stocked) up Material Stocked NR Nitrile Rubber vailable (onsult actory) U Urethane (lat) Mounting Thread N3 3/8 NPS 3 3/8 SPP 78 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information & imensions PKT Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. dapter for PK ups imensions PKT-60 and PKT-100 Model Number Vacuum ups PKT Vacuum up ssemblies Model Number Index (old Items are Stocked) PKT - 60 - NR TN-PK-T dapter / O-ring dapter PK--6710 ap TN-PK-100-M10 ap M10x1.5 Male Screw Male (Square) Ø PKT-60-* 2.36 (60) 1.33 (34) 1.10 (28) 1.81 (46).04 (1.1) PKT-75-* 2.95 (75) 1.38 (35) 1.10 (28) 1.81 (46).04 (1.1) PKT-100-* 3.94 (100) 1.65 (42) 1.10 (28) 1.81 (46).05 (1.3) * up Material (old Items are Stocked) Note: Simply remove the hex keyed male screw to replace cup. ex Key Size: 8mm up iameter (mm) 60 (60) 75 (75) 100 (100) dapter omponents dapter Part Numbers Thread Sizes escription up Material Stocked NR Nitrile Rubber vailable (onsult actory) U Urethane 79 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information & imensions PK Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. emale dapter for PK ups imensions PK-75 thru PK-100 Pipe I.. Mounting Thread Model Number Ø PK-75-*- 1.57 (40) 1.91 (48.5) 1.10 (28) 1.81 (46).20 (5) PK-100-*- 1.97 (50) 2.19 (55.5) 1.10 (28) 1.81 (46).31 (8) * up Material Thread Size Vacuum ups PK Vacuum up ssemblies Model Number Index (old Items are Stocked) PK - 75 - NR - N3 up iameter (mm) 75 (75) 100 (100) Note: Simply remove the hex keyed male screw to replace cup. ex Key Size: 8mm (old Items are Stocked) dapter omponents dapter Part Numbers Thread Sizes escription TN-PK--N3 emale 3/8 NPT emale Port TN-PK--3 3/8 SPP emale Port ap TN-PK-100-M10 M10x1.5 Male Screw PK--6710 ap Male up Material Stocked NR Nitrile Rubber vailable (onsult actory) U Urethane Mounting Thread N3 3/8 NPS 3 3/8 SPP 80 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information & imensions PKT Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. dapter for PK ups imensions PKT-75 thru PKT-10 Model Number Ø PKT-75-* 1.57 (40) 1.38 (35) 1.10 (28) 1.81 (46).20 (5) PKT-100-* 1.97 (50) 1.65 (42) 1.10 (28) 1.81 (46).31 (8) * up Material Vacuum ups PKT Vacuum up ssemblies Model Number Index (old Items are Stocked) PKT - 75 - NR Note: Simply remove the hex keyed male screw to replace cup. ex Key Size: 8mm dapter omponents dapter Part Numbers Thread Sizes escription dapter ap Male (old Items are Stocked) up iameter (mm) 75 (75) 100 (100) TN-PK-T dapter / O-ring PK--6710 ap TN-PK-100-M10 M10x1.5 Male Screw up Material Stocked NR Nitrile Rubber vailable (onsult actory) U Urethane (Square) 81 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information & imensions PKJ Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. emale dapter for PK ups imensions PKJ-75 thru PKJ-100 Pipe I.. Mounting Thread Model Number Ø PKJ-40-*- 1.57 (40) 2.03 (51.5) 1.10 (28) 1.81 (46).41 (10.5) PKJ-50-*- 1.97 (50) 2.03 (51.5) 1.10 (28) 1.81 (46).75 (19) PKJ-60-*- 2.23 (60) 2.03 (51.5) 1.10 (28) 1.81 (46).55 (14) PKJ-80-*- 3.15 (80) 2.19 (55.5) 1.10 (28) 1.81 (46).67 (17) PKJ-110-*- 4.33 (110) 2.62 (66.5) 1.10 (28) 1.81 (46).91 (23) * up Material Thread Size Vacuum ups PKJT Vacuum up ssemblies Model Number Index (old Items are Stocked) PKJ - 60 - NR - N3 up iameter (mm) 40 (40) 50 (50) 60 (60) 80 (80) 110 (110) Note: Simply remove the hex keyed male screw to replace cup. ex Key Size: 8mm (old Items are Stocked) dapter omponents dapter Part Numbers Thread Sizes escription TN-PK--N3 emale 3/8 NPT emale Port TN-PK--3 3/8 SPP emale Port ap TN-PK-100-M10 M10x1.5 Male Screw PK--6710 ap Male up Material Stocked NR Nitrile Rubber vailable (onsult actory) U Urethane Mounting Thread N3 3/8 NPS 3 3/8 SPP 82 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information & imensions PKJT Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. dapter for PKJ ups imensions PKJT-40 thru PKJT-110 Model Number Vacuum ups PKJT Vacuum up ssemblies Model Number Index (old Items are Stocked) PKJT - 60 - NR dapter TN-PK-T dapter / O-ring PK--6710 ap ap TN-PK-100-M10 M10x1.5 Male Screw Male (Square) Ø PKJT-40-* 1.57 (40) 1.50 (38) 1.10 (28) 1.81 (46).41 (10.5) PKJT-50-* 1.97 (50) 1.50 (38) 1.10 (28) 1.81 (46).75 (19) PKJT-60-* 2.23 (60) 1.50 (38) 1.10 (28) 1.81 (46).55 (14) PKJT-80-* 3.15 (80) 1.65 (42) 1.10 (28) 1.81 (46).67 (17) PKJT-110-* 4.33 (110) 2.09 (53) 1.10 (28) 1.81 (46).91 (23) * up Material (old Items are Stocked) up iameter (mm) 40 (40) 50 (50) 60 (60) 80 (80) 110 (110) Note: Simply remove the hex keyed male screw to replace cup. ex Key Size: 8mm dapter omponents dapter Part Numbers Thread Sizes escription up Material Stocked NR Nitrile Rubber vailable (onsult actory) U Urethane 83 Parker annifin orporation ivision

atalog 0802-2/US eatures PU lat Swivel Vacuum ups PU Series Vacuum ups 30 inclusive swivel, single lip cup for smooth, slightly curved surfaces and flexible products. Rigid construction provides good stability against acceleration and deceleration forces during product transfer. PUTK Series arbed ulkhead Top stem connectors secured with jam nuts and allow tubing connections at the top side. Nickel plated brass materials. PUYK Series 90 arbed dapter Side stem connectors allow you to secure the stem with a bolt thru a plate or L bracket to allow the tube connection from the side port. Nickel plated brass materials. Vacuum ups PU Vacuum ups eatures Internal Swivel Joint esign 30 Inclusive ngle for lexible Products Increased Stability for orizontal Lifts Lower Maintenance osts 10mm to 200mm iameters pplications The single edge swivel cup is for smooth surfaces with slightly curved surfaces or flexible sheets with substantial weights. Typically, lift capacities and break away forces are higher for flat cups which may be necessary for good stability during lift and transfer. The position of the internal swivel joint minimizes moments during lift and transfer. The swivel joint compensates for load and angular misalignment instead of the cup material, prolonging cup life. Maintenance costs are minimized by replacing only the cup portion of the assembly. PUTYS Series ulkhead Level ompensator 303 stainless steel construction secured with jam nuts. Spring biased compensators can absorb impacts of down-strokes and adjust for different levels of pick up points. 303 stainless corrosion resistant materials with drymet bushings increases the strength and life. 84 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information Model Number Index (ups Only) (old Items are Stocked) PU - 10 - NR up iameter (mm) 10 (10) 50 (50) 15 (15) 60 (60) 20 (20) 80 (80) 25 (25) 100 (100) 30 (30) 120 (120) 35 (35) 150 (150) 40 (40) 200 (200) PU up Specifications up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) R hloroprene U Urethane KM louro Rubber S igh Temp Vacuum ups PU Vacuum ups Model Number Index (old Items are Stocked) PU - 10 - NR up iameter (mm) 10 (10) 50 (50) 15 (15) 60 (60) 20 (20) 80 (80) 25 (25) 100 (100) 30 (30) 120 (120) 35 (35) 150 (150) 40 (40) 200 (200) PU ssembly up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) R hloroprene U Urethane KM louro Rubber S igh Temp NR NR R SI SI U KM S Suction up Nitrile Silicone louro Silicone Material Nitrile hloroprene Silicone Urethane S* S* Rubber igh Temp Operating -20-30 -30-60 -60-30 -10-50 Temperature ( ) to +120 to +120 to +140 to +250 to +250 to +120 to +230 to +300 lack / lack / lack / olor lack reen White lue rey lue ot Red ot White ot ardness, 55 ±5 70 ±5 55 ±5 55 ±5 55 ±5 55 ±5 70 ±5 55 ±5 Shore ( Sh) lectrical 800 800 (Ωm) to 1000 to 1000 Wear Tear Strength ging Ozone asoline Oil cid lkali hemical Mechanical = excellent; = very good; = good; = medium; = poor; = not recommended * S: lectric Static issipative Material 85 Parker annifin orporation ivision

atalog 0802-2/US pplications & Technical ata pplication uide Swivel ellows ngles Pickup Main ata for Swivel ellows PU ups Vacuum ups PU Vacuum ups Lifting orce @ 60% (N) up Radius Model up iameter rea Volume (V) eflection (S) R Number cm 2 Liters mm (mm) PU-10-*.39 (10) 0.79 0.00007 4.80 1 6 PU-15-*.59 (15) 1.77 0.0004 10.8 1.4 6 PU-20-*.79 (20) 3.14 0.0008 19.2 2 9 PU-25-*.98 (25) 4.91 0.0013 30.0 2.5 17 PU-30-* 1.18 (30) 7.07 0.0018 43.2 2 26 PU-35-* 1.38 (35) 9.62 0.0026 58.9 3 31 PU-40-* 1.57 (40) 12.6 0.0040 76.9 3 37 PU-50-* 1.57 (40) 19.6 0.0070 120 4 41 PU-60-* 2.36 (60) 28.3 0.0090 173 5 70 PU-80-* 3.15(80) 50.3 0.025 308 6 100 PU-100-* 3.94 (100) 78.5 0.045 480 6 150 PU-120-* 4.72 (120) 113.1 0.078 692 8 365 PU-150-* 5.91 (150) 177.0 0.177 1081 10 380 PU-200-* 7.87 (200) 314.0 0.425 1922 12 430 * up Material Mounting Thread 15 Max. Tube I.. Volume V Mounting Thread Tube I.. up eflection ixtures for urved Product S Mounting Thread Tube I.. Radius R 86 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions PU-10 and PU-15 PU-60 thru PU-100 M12x1.25 SW19 Model Number * up Material M4x0.7 SW7 SW12 30 30 PU-200 PU-20 thru PU-35 M20x1.5 SW30 SW17 30 Vacuum ups PU Vacuum ups PU-120 thru PU-150 PU-40 and PU-50 Ø Ø Ø PU-10-*.39 (10).07 (1.8).20 (5).22 (5.5).79 (20).04 (1).20 (5) PU-15-*.59 (15).07 (1.8).24 (6).22 (5.5).83 (21).06 (1.4).20 (5) PU-20-*.79 (20).09 (2.3).35 (9).24 (6) 1.10 (28).08 (2).356 (9.05).41 (10.5) PU-25-*.98 (25).09 (2.3).37 (9.5).24 (6) 1.12 (28.5).10 (2.5).356 (9.05).41 (10.5) PU-30-* 1.18 (30).09 (2.3).39 (10).24 (6) 1.14 (29).08 (2).356 (9.05).41 (10.5) PU-35-* 1.38 (35).09 (2.3).43 (11).24 (6) 1.18 (30).12 (3).356 (9.05).41 (10.5) PU-40-* 1.57 (40).12 (3.0).43 (11).28 (7) 1.46 (37).12 (3).474 (12.05).49 (12.5) PU-50-* 1.97 (50).12 (3.0).47 (12).28 (7) 1.50 (38).15 (4).474 (12.05).49 (12.5) PU-60-* 2.36 (60).15 (3.9).63 (16).35 (9) 2.05 (52).20 (5).59 (15).28 (7) PU-80-* 3.15 (80).15 (3.9).71 (18).35 (9) 2.13 (54).24 (6).59 (15).28 (7) PU-100-* 3.94 (100).15 (3.9).71 (18).35 (9) 2.13 (54).24 (6).59 (15).28 (7) PU-120-* 4.72 (120).23 (5.9).91 (23).51 (13) 2.87 (73).31 (8).79 (20).39 (10) PU-150-* 5.91 (150).23 (5.9).98 (25).51 (13) 2.95 (75).39 (10).79 (20).39 (10) PU-200-* 7.87 (200).31 (7.9) 1.14 (29).63 (16) 3.35 (85).47 (12).79 (20).47 (12) 30 M16x1.5 SW24 SW19 30 30 87 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information PUTK Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Mounting Thread Tube I.. arbed ulkhead for PU ups Vacuum ups PUTK Vacuum up ssemblies Model Number Index (old Items are Stocked) PUTK - 10 - NR - up iameter (mm) 10 (10) 50 (50) 15 (15) 60 (60) 20 (20) 80 (80) 25 (25) 100 (100) 30 (30) 120 (120) 35 (35) 150 (150) 40 (40) 200 (200) up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) R hloroprene U Urethane KM louro Rubber S igh Temp Vacuum Port lank arb N1 1/8 NPT 1 1/8 SPP R1 1/8 SPT N2 1/4 NPT 2 1/4 SPP R2 1/4 SPT See hart elow (old Items are Stocked) up iameter Vacuum Port Mounting UTK itting Included in Kit (mm) ode Thread Thread Part Number Tube I 10, 15 lank arb M8x1.25 Male UTK-10.157 (4) 20, 25, 30, 35 lank arb M10x1.5 Male UTK-20.157 (4) 40, 50 lank arb M14x1.5 Male UTK-40.157 (4) N1 1/8 NPT UTK-60-N1 60, 80, 100 1 1/8 SPP M16x1.5 Male UTK-60-1 N/ R1 1/8 SPT UTK-60-R1 N1 1/8 NPT UTK-120-N1 120, 150 1 1/8 SPP M22x1.5 Male UTK-120-1 N/ R1 1/8 SPT UTK-120-R1 N2 1/4 NPT UTK-200-N2 200 2 1/4 SPP M22x1.5 Male UTK-200-2 N/ R2 1/4 SPT UTK-200-R2 88 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions PUTK-10 and PUTK-15 PUTK-60 thru PUTK-100 M16x1.5 SW21 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT Plug SW19 Model Number Vacuum ups PUTK Vacuum up ssemblies PUTK-40 and PUTK-50 Ø Wt oz (g) PUTK-10-*.39 (10) 2.20 (56).63 (16).35 (9).04 (1).63 (16).15 (4).15 (4).7 (20) PUTK-15-*.59 (15) 2.24 (57).63 (16).35 (9).06 (1.4).63 (16).15 (4).15 (4).7 (20) PUTK-20-*.79 (20) 2.76 (70).63 (16).71 (18).08 (2).79 (20).20 (5).51 (13) 2.3 (66) PUTK-25-*.98 (25) 2.78 (70.5).63 (16).71 (18).10 (2.5).79 (20).20 (5).53 (13.5) 2.3 (66) PUTK-30-* 1.18 (30) 2.80 (71).63 (16).71 (18).08 (2).79 (20).20 (5).55 (14) 2.5 (71) PUTK-35-* 1.38 (35) 2.83 (72).63 (16).71 (18).12 (3).79 (20).20 (5).59 (15) 2.5 (71) PUTK-40-* 1.57 (40) 3.03 (77).63 (16).91 (23).12 (3).79 (20).20 (5).43 (11) 4.2 (118) PUTK-50-* 1.97 (50) 3.07 (78).63 (16).91 (23).15 (4).79 (20).20 (5).47 (12) 4.3 (121) PUTK-60-* 2.36 (60) 3.66 (93).63 (16) 1.89 (48).20 (5).91 (23).24 (6).63 (16) 12.4 (352) PUTK-80-* 3.74 (80) 3.74(95) 1.38 (35) 2.16 (55).24 (6).91 (23).24 (6).71 (18) 15.7 (444) PUTK-100-* 3.94 (100) 3.74 (95) 1.38 (35) 2.16 (55).24 (6).91 (23).24 (6).71 (18) 20.0 (568) PUTK-120-* 4.72 (120) 5.04 (128) 1.81 (46) 2.95 (75).37 (8) 1.26 (32).37 (8).91 (23) 34.0 (63) PUTK-150-* 5.91 (150) 5.12 (130) 1.81 (46) 2.95 (75).39 (10) 1.26 (32).37 (8).98 (25) 41.0 (1107) PUTK-200-* 7.87 (200) 5.51 (140) 1.81 (46) 2.80 (71).47 (12) 1.26 (32).37 (8) 1.14 (29) 83.0 (2340) * up Material.197 ia. Ø (5) M8x1.25 SW10 10 12 30 30.118 ia. Ø (3) N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT PUTK-20 thru PUTK-35.197 ia. Ø (5) M10x1.5 SW14 SW17 SW17 30 PUTK-120 thru PUTK-150 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT M22x1.5 SW27 Plug SW27 SW24 30.118 ia. Ø (3) N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT PUTK-200 N2: 1/4 NPT 2: 1/4 SPP R2: 1/4 SPT M22x1.5 SW27 Plug SW27 SW30.197 ia. Ø (5) M14x1.5 M5x0.8 SW17 SW19 SW19 30.118 ia. Ø (3) 30 N2: 1/4 NPT 2: 1/4 SPP R2: 1/4 SPT 89 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information PUYK Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Mounting Thread Tube I.. 90 arbed dapter for PU ups Vacuum ups PUYK Vacuum up ssemblies PUYK - 10 - NR - up iameter Vacuum Port Mounting UYK itting Included in Kit (mm) ode Thread Thread Part Number Tube I Model Number Index (old Items are Stocked) up iameter (mm) 10 (10) 50 (50) 15 (15) 60 (60) 20 (20) 80 (80) 25 (25) 100 (100) 30 (30) 120 (120) 35 (35) 150 (150) 40 (40) 200 (200) (old Items are Stocked) up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) R hloroprene U Urethane KM louro Rubber S igh Temp 10, 15 lank arb M4x0.7 emale UYK-10.157 (4) 20, 25, 30, 35 lank arb M6x1 emale UYK-20.157 (4) 40, 50 lank arb M8x1.25 emale UYK-40.157 (4) N1 1/8 NPT UTK-60-N1 60, 80, 100 1 1/8 SPP M16x1.5 Male UTK-60-1 N/ R1 1/8 SPT UTK-60-R1 N1 1/8 NPT UTK-120-N1 120, 150 1 1/8 SPP M22x1.5 Male UTK-120-1 N/ R1 1/8 SPT UTK-120-R1 N2 1/4 NPT UTK-200-N2 200 2 1/4 SPP M22x1.5 Male UTK-200-2 N/ R2 1/4 SPT UTK-200-R2 Vacuum Port lank arb N1 1/8 NPT 1 1/8 SPP R1 1/8 SPT N2 1/4 NPT 2 1/4 SPP R2 1/4 SPT See hart elow 90 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions PUYK-10 thru PUYK-15.197 ia. Ø (5).118 ia. Ø (3) SW7 SW12 30 PUYK-60 thru PUYK-100 Plug M16x1.5 SW21 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT SW19 30 M4X0.7 SW10 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT SW27 N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT PUYK-20 thru PUYK-35.197 ia. Ø (5) Plug M22x1.5 Plug SW27 SW24.118 ia. Ø (3) SW17 PUYK-120 thru PUYK-150 30 30 Vacuum ups PUYK Vacuum up ssemblies N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT Model Wt Ø Number oz (g) PUYK-10*.39 (10) 1.44 (36.5).55 (14).89 (22.5).04 (1).24 (6).83 (21).20 (5).7 (20) PUYK-15-*.59 (15) 1.48 (37.5).55 (14).78 (22.5).06 (1.4).24 (6).83(21).20 (5).7 (20) PUYK-20-*.79 (20) 1.93 (49).63 (16) 1.30 (33).08 (2).31 (8).96 (24.5).35 (9) 2.3 (66) PUYK-25-*.98 (25) 1.95 (49.5).63 (16) 1.30 (33).10 (2.5).31 (8).96 (24.5).37 (9.5) 2.3 (66) PUYK-30-* 1.18 (30) 1.97 (50).63 (16) 1.30 (33).08 (2).31 (8).96 (24.5).39 (10) 2.6 (73) PUYK-35-* 1.38 (35) 2.01 (51).63 (16) 1.30 (33).12 (3).31 (8).96 (24.5).43 (11) 2.6 (73) PUYK-40-* 1.57 (40) 2.32 (59).71 (18) 1.50 (38).12 (3).39 (10) 1.00 (25.5).43 (11) 4.0 (116) PUYK-50-* 1.97 (50) 2.36 (60).71 (18) 1.50 (38).15 (4).39 (10) 1.00 (25.5).47 (12) 4.1 (117) PUYK-60-* 2.36 (60) 3.66 (93) 1.38 (35) 2.16 (55).20 (5).91 (23).24 (6).63 (16) 12.4 (352) PUYK-80-* 3.74 (80) 3.74(95) 1.38 (35) 2.16 (55).24 (6).91 (23).24 (6).71 (18) 15.7 (444) PUYK-100-* 3.94 (100) 3.74 (95) 1.38 (35) 2.16 (55).24 (6).91 (23).24 (6).71 (18) 20.0 (568) PUYK-120-* 4.72 (120) 5.04 (128) 1.81 (46) 2.95 (75).37 (8) 1.26 (32).37 (8).91 (23) 34.0 (63) PUYK-150-* 5.91 (150) 5.12 (130) 1.81 (46) 2.95 (75).39 (10) 1.26 (32).37 (8).98 (25) 41.0 (1107) PUYK-200-* 7.87 (200) 5.51 (140) 1.81 (46) 3.11 (79).47 (12) 1.26 (32).37 (8) 1.14 (29) 83.0 (2340) * up Material M6x1 SW17 PUYK-40 and PUYK-50.197 ia. Ø (5) PUYK-200 SW27 N2: 1/4 NPT 2: 1/4 SPP R2: 1/4 SPT.118 ia. Ø (3) SW19 Plug M22x1.5 SW27 SW30 30 30 M8x1.25 SW19 N2: 1/4 NPT 2: 1/4 SPP R2: 1/4 SPT 91 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information PUTYS Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Shown are interchangable connectors & plugs for port connections. ulkhead Level ompensator for PU ups Interchangable* Pushlock Tube itting Mounting Thread. Vacuum ups PUTYS Vacuum up ssemblies up iameter Stroke (mm) (mm) 10 (10) 3, 10, 15 15 (15) 20 (20) 25 (25) 30 (30) 6, 15, 30 35 (35) 40 (40) 50 (50) 60 (60) 80 (80) 30, 50, 70 100 100) 120 (120) 150 (150) 20, 70 200 (200) up iameter Vacuum Port UTYS ssembly 1 2 Included in Kit (mm) ode Thread Part Number Stroke lbf (N) lbf (N) UTYS-10-3 3mm M5X8 10, 15 M5 UTYS-10-10 10mm.11 (.49).13 (.59) emale UTYS-10-15 15mm 20, 25, 30, 35 M5 UTYS-20-6 6mm.56 (2.5).79 (3.4) M5x8 UTYS-20-15 15mm.56 (2.5) 1.2 (4.9) emale UTYS-20-30 30mm.67 (2.9) 1.4 (5.9) 40, 50 M5 UTYS-40-6 6mm.56 (2.5).79 (3.4) M5x8 UTYS-40-15 15mm.56 (2.5) 1.2 (4.9) emale UTYS-40-30 30mm.67 (2.9) 1.4 (5.9) 60, 80, 100 N1 120, 150 N2 200 N2 arb itting Plug * Not included with assembly 1/8 NPT emale Model Number Index (old Items are Stocked) PUTYS 10 3 NR M5 (old Items are Stocked) up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) R hloroprene U Urethane KM louro Rubber S igh Temp ompression orce 1 0% of Stroke Vacuum Ports M5 M5 N1 1/8 NPT N2 1/4 NPT See hart elow 100% of Stroke UTYS-60-30 30mm 1.6 (6.8) 3.6 (15.6) UTYS-60-50 50mm 1.9 (8.3) 4.5 (19.6) UTYS-60-70 70mm 2.2 (9.5) 4.8 (21) 1/4 NPT UTYS-120-20 20mm 3.6 (15.6) 6.8 (29) emale UTYS-120-70 70mm 3.4 (14.7) 6.8 (29) 1/4 NPT UTYS-200-20 20mm 3.6 (15.6) 6.8 (29) emale UTYS-200-70 70mm 3.4 (14.7) 6.8 (29) 2 92 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions PUTYS103 thru PUTYS1515 M5x0.8 M8x0.75 SW12 M5x0.8 SW7 SW12 Model Number Vacuum ups PUTYS Vacuum up ssemblies Ø Wt oz (g) PUTYS103*.39 (10) 2.66 (67.5).73 (18.5).31 (8).04 (1).12 (3).12 (3).91 (23).88 (25) PUTYS1010*.39 (10) 2.93 (74.5).73 (18.5).31 (8).04 (1).39 (10).12 (3).91 (23).92 (26) PUTYS1015*.39 (10) 3.43 (87).73 (18.5).31 (8).04 (1).59 (15).12 (3) 1.20 (30.5).99 (28) PUTYS153*.59 (15) 2.70 (68.5).73 (18.5).31 (8).06 (1.4).12 (3).12 (3).91 (23).88 (25) PUTYS1510*.59 (15) 2.97 (75.5).73 (18.5).31 (8).06 (1.4).39 (10).12 (3).91 (23).92 (26) PUTYS1515*.59 (15) 3.46 (88).73 (18.5).31 (8).06 (1.4).59 (15).12 (3) 1.20 (30.5).99 (28) PUTYS206*.79 (20) 3.52 (89.5).63 (16).39 (10).08 (2).24 (6).20 (5) 1.42 (36) 3.1 (89) PUTYS2015*.79 (20) 3.88 (98.5).63 (16).39 (10).08 (2).59 (15).20 (5) 1.42 (36) 3.3 (94) PUTYS2030*.79 (20) 5.33 (135.5).63 (16).39 (10).08 (2) 1.18 (30).20 (5) 2.28 (58) 4.2 (119) PUTYS256*.79 (20) 3.54 (90).63 (16).39 (10).10 (2.5).24 (6).20 (5) 1.42 (36) 3.1 (89) PUTYS2515*.79 (20) 3.90 (99).63 (16).39 (10).10 (2.5).59 (15).20 (5) 1.42 (36) 3.3 (94) PUTYS2530*.79 (20) 5.35 (136).63 (16).39 (10).10 (2.5) 1.18 (30).20 (5) 2.28 (58) 4.2 (119) PUTYS306* 1.18 (30) 3.56 (90.5).63 (16).39 (10).08 (2).24 (6).20 (5) 1.42 (36) 3.3 (94) PUTYS3015* 1.18 (30) 3.92 (99.5).63 (16).39 (10).08 (2).59 (15).20 (5) 1.42 (36) 3.5 (99) PUTYS3030* 1.18 (30) 5.37 (136.5).63 (16).39 (10).08 (2) 1.18 (30).20 (5) 2.28 (58) 4.4 (124) PUTYS356* 1.18 (30) 3.60 (91.5).63 (16).39 (10).12 (3).24 (6).20 (5) 1.42 (36) 3.3 (94) PUTYS3515* 1.18 (30) 3.96 (100.5).63 (16).39 (10).12 (3).59 (15).20 (5) 1.42 (36) 3.5 (99) PUTYS3530* 1.18 (30) 5.41 (137.5).63 (16).39 (10).12 (3) 1.18 (30).20 (5) 2.28 (58) 4.4 (124) PUTYS406* 1.57 (40) 3.84 (97.5).67 (17).39 (10).12 (3).24 (6).20 (5) 1.42 (36) 4.3 (123) PUTYS4015* 1.57 (40) 4.19 (106.5).67 (17).39 (10).12 (3).59 (15).20 (5) 1.42 (36) 4.5 (128) PUTYS4030* 1.57 (40) 5.65 (143.5).67 (17).39 (10).12 (3) 1.18 (30).20 (5) 2.28 (58) 5.4 (153) PUTYS506* 1.97 (50) 3.88 (98.5).67 (17).39 (10).16 (4).24 (6).20 (5) 1.42 (36) 4.3 (123) PUTYS5015* 1.97 (50) 4.23 (107.5).67 (17).39 (10).16 (4).59 (15).20 (5) 1.42 (36) 4.5 (128) PUTYS5030* 1.97 (50) 5.69 (144.5).67 (17).39 (10).16 (4) 1.18 (30).20 (5) 2.28 (58) 5.4 (154) * up Material SW6.35 (9) PUTYS206 thru PUTYS3530 SW17 M5x0.8 M14x1 M5x0.8 SW12 SW19 SW17.20 (5) PUTYS406 thru PUTYS5030 SW19 SW17 SW17 M5x0.8 M14x1 M5x0.8 SW12.20 (5) 93 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions PUTYS6010 thru PUTYS10050 Model Number Vacuum ups PUTYS Vacuum up ssemblies Ø J Wt oz (g) PUTYS6030* 3.74 (60) 7.28 (185) 1.57 (40).79 (20).20 (5) 1.77 (45).39 (10) 1.97 (50).47 (12) 17.2 (487) PUTYS6050* 3.74 (60) 8.27 (210) 1.57 (40).79 (20).20 (5) 2.76 (70).39 (10) 1.97 (50).47 (12) 18.4 (521) PUTYS6070* 3.74 (60) 9.25 (235) 1.57 (40).79 (20).20 (5) 3.54 (90).39 (10) 1.97 (50).47 (12) 19.3 (548) PUTYS8030* 5.91 (80) 7.36 (187) 1.57 (40).79 (20).24 (6) 1.77 (45).39 (10) 1.97 (50).47 (12) 19.7 (559) PUTYS8050* 5.91 (80) 8.35 (212) 1.57 (40).79 (20).24 (6) 2.76 (70).39 (10) 1.97 (50).47 (12) 20.1 (595) PUTYS8070* 5.91 (80) 9.33 (237) 1.57 (40).79 (20).24 (6) 3.54 (90).39 (10) 1.97 (50).47 (12) 21.9 (620) PUTYS10030* 1.18 (30) 7.36 (187) 1.57 (40).79 (20).24 (6) 1.77 (45).39 (10) 1.97 (50).47 (12) 25.7 (729) PUTYS10050* 1.18 (30) 8.35 (212) 1.57 (40).79 (20).24 (6) 2.76 (70).39 (10) 1.97 (50).47 (12) 26.7 (756) PUTYS10070* 1.18 (30) 9.33 (237) 1.57 (40).79 (20).24 (6) 3.54 (90).39 (10) 1.97 (50).47 (12) 49.9 (1414) * up Material N1: 1/8 NPT M22x1.5 N1: 1/8 NPT SW19 30 SW19.28 (7) J SW30 SW22 94 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions PUTYS12020 thru PUTYS20070 Vacuum ups PUTYS Vacuum up ssemblies Model Wt Ø J Number oz. (g) PUTYS12020* 4.72 (120) 9.88 (251) 2.36 (60) 1.06 (27).31 (8) 1.38 (35).39 (10) 2.36 (60) 1.38 (35) 49.9 (1414) PUTYS12070* 4.72 (120) 12.44 (316) 2.36 (60) 1.06 (27).31 (8) 3.94 (100).39 (10) 2.36 (60) 1.38 (35) 52.7 (1495) PUTYS15020* 4.72 (120) 9.96 (253) 2.36 (60) 1.06 (27).39 (10) 1.38 (35).39 (10) 2.36 (60) 1.38 (35) 57.8 (1640) PUTYS15070* 4.72 (120) 12.52 (318) 2.36 (60) 1.06 (27).39 (10) 3.94 (100).39 (10) 2.36 (60) 1.38 (35) 60.7 (1721) PUTYS20020* 4.72 (120) 10.20 (279) 2.36 (60) 1.06 (27).47 (12) 1.38 (35).39 (10) 2.36 (60) 1.38 (35) 98.1 (2780) PUTYS20070* 4.72 (120) 12.76 (324) 2.36 (60) 1.06 (27).47 (12) 3.94 (100).39 (10) 2.36 (60) 1.38 (35) 100.9 (2861) * up Material M30x1.5 N2: 1/4 NPT 120 & 150: SW24 200 : SW30 N2: 1/4 NPT SW26 SW36 SW30.31 (8) J 95 Parker annifin orporation ivision

atalog 0802-2/US eatures PO rooved Vacuum ups PO Series Vacuum ups Special grooved flat cup with single lip provides increases vacuum flow area. Increased holding force resists against slipping of products with oily surfaces. Increased holding force also works well with corrugated product. POTM Series Male Thread onnector Simple male connection for low profile positions secured to a plate or bracket. UN, NPT,, SPT, metric threads. Internal hex for easy assembly. itting Material: luminum. POT Series emale Thread onnector Simple female connection for low profile positions secured to a plate or bracket. NPS, threads. Internal hex for easy assembly. itting Material: luminum. Vacuum ups PO Vacuum ups eatures Vacuum rooves On Underside Increases olding rea Resists cceleration and eceleration Shear Shear Is Increased y 25% 20mm to 40mm iameters pplications The anti-slip flat cups are for pick-and- place applications that require an increased holding force without having to increase the diameter of the cup. The grooved foot pattern channels the vacuum flow to the cup s outer diameter which increases resistance to the shear force by 25% over conventional flat pads. These cups are perfect for high speed press transfer of small to medium sized stamped metal products with oily surfaces. This cup also works well with corrugated product. POTK Series arbed ulkhead Top stem connectors secured with jam nuts and allow tubing connections at the top side. Nickel plated brass materials. POYK Series 90 arbed dapter Side stem connectors allow you to secure the stem with a bolt through a plate or L bracket to allow the tube connection from the side port. Nickel plated brass materials. POTYS Series ulkhead Level ompensator 303 stainless steel construction secured with jam nuts. Spring biased compensators can absorb impacts of down-strokes and adjust for different levels of pick up points. 303 stainless corrosion resistant materials with drymet bushings increases the strength and life. 96 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information Model Number Index (ups Only) (old Items are Stocked) Specifications Vacuum ups PO Vacuum ups PO - 20 - NR up iameter (mm) 20 (20) 25 (25) 30 (30) 35 (35) 40 (40) Suction up NR U Material Nitrile Urethane Operating Temperature ( ) -20 to +120-30 to +120 olor lack lue ardness, Shore ( Sh) Wear 55 ±5 55 ±5 Tear Strength ging Ozone asoline Oil cid lkali hemical Mechanical = excellent; = very good; = good; = medium; = poor; = not recommended up Material Stocked NR Nitrile Rubber vailable (onsult actory) U Urethane 97 Parker annifin orporation ivision

atalog 0802-2/US pplications & imensions Selection uide nti-slip lat ups Increased olding rea for orrugated Main ata for nti-slip PO Suction ups PO-20 Volume V Vacuum ups PO Vacuum ups up eflection Lifting orce @ 60% (N) up Radius Model up iameter rea Volume (V) eflection (S) R Number cm 2 liters mm (mm) PO-20.79 (20) 3.14 0.0008 18.0 11.25 2.3 4.0 PO-25.98 (25) 4.91 0.0013 29.0 18.0 3.0 17.5 PO-30 1.18 (30) 7.07 0.0018 42.0 26.0 2.0 26.0 PO-35 1.37 (35) 9.62 0.0026 57.0 35.0 3.0 37.0 PO-40 1.57 (40) 12.6 0.0040 74.0 46.0 3.5 41.0 imensions Resists Slipping gainst Oily Surfaces for Small Sheet Metal Transfer PO-25 thru PO-40 Model Number Ø Ø Ø Ø PO-20-*.79 (20).18 (4.6).43 (11).59 (15).39 (10).06 (1.5).18 (4.5) PO-25-*.98 (25).24 (6).43 (11).63 (16).55 (14).04 (1.1).28 (7) PO-30-* 1.18 (30).24 (6).43 (11).55 (14).47 (12).05 (1.3).28 (7) PO-35-* 1.37 (35).24 (6).43 (11).83 (21).47 (12).06 (1.6).28 (7) PO-40-* 1.57 (40).24 (6).43 (11).94 (24).55 (14).11 (2.8).28 (7) * up Material S Radius R 98 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information & imensions POTM Vacuum up ssemblies Male Threaded itting for PO ups Model Number Ø POTM-25-*-.98 (25).75 (19).31 (8).20 (5).04 (1.1) POTM-30-*- 1.18 (30).67 (17).31 (8).20 (5).05 (1.3) POTM-35-*- 1.38 (35).75 (19).31 (8).20 (5).06 (1.6) POTM-40-*- 1.57 (40).75 (19).31 (8).20 (5).11 (2.8) * up Material Thread Size Vacuum ups POTM Vacuum up ssemblies Model Number Index (old Items are Stocked) POTM - 25 - NR - N1 up iameter (mm) 25 (25) 30 (30) 35 (35) 40 (40) Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Mounting Tube I.. listed below is a Thread recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. Tube I.. up iameter Mounting Mounting TM itting Included in Kit (mm) Thread ode Thread Part Number Min. Tube I N1 1/8 NPT TM-20-N1 25, 30, 35, 40 1 1/8 SPP TM-20-1 2 1/4 SPP TM-20-2.157 (4) M10 M10x1.25 TM-20-M10 imensions POTM-25-1/8 thru POTM-40-1/8 1/2" (old Items are Stocked) N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT M10: 10x1.25 up Material Stocked NR Nitrile Rubber vailable (onsult actory) U Urethane Mounting Thread N1 1/8 NPT 1 1/8 SPP M10 M10 2 1/4 SPP See hart elow 99 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information & imensions POT Vacuum up ssemblies Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. emale Threaded itting for PO ups Model Number Ø POT-25-*-.98 (25) 1.10 (28).04 (1.1) POT-30-*- 1.18 (30) 1.02 (26).05 (1.3) POT-35-*- 1.38 (35) 1.10 (28).06 (1.6) POT-40-*- 1.57 (40) 1.10 (28).11 (2.8) * up Material Thread Size Vacuum ups POT Vacuum up ssemblies Model Number Index (old Items are Stocked) POT - 25 - NR - N1 Installation Pipe I.. Mounting Thread Mounting Thread up iameter Mounting Mounting T itting Included in Kit (mm) Thread ode Thread Part Number Min. Tube I imensions POT-25-1/8 thru POT-40-1/8 N1 1/8 NPT T-20-N1 25, 30, 35, 40 1 1/8 SPP T-20-1.157 (4) 2 1/4 SPP T-20-2 1/2" up iameter (mm) 25 (25) 30 (30) 35 (35) 40 (40) (old Items are Stocked) N1: 1/8 NPT 1: 1/8 SPP R1: 1/8 SPT up Material Stocked NR Nitrile Rubber vailable (onsult actory) U Urethane Mounting Thread N1 1/8 NPT 1 1/8 SPP 2 1/4 SPP See hart elow Tube I.. 100 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information & imensions POTK Vacuum up ssemblies arbed ulkhead for PO ups Model Number Ø POTK-20-*.79 (20) 1.89 (48).63 (16).87 (22).07 (1.7).59 (15).20 (5) POTK-25-*.98 (25) 2.44 (62).63 (16) 1.26 (32).04 (1.1).79 (20).20 (5) POTK-30-* 1.18 (30) 2.36 (60).63 (16) 1.26 (32).05 (1.3).79 (20).20 (5) POTK-35-* 1.38 (35) 2.44 (62).63 (16) 1.26 (32).06 (1.6).79 (20).20 (5) POTK-40-* 1.57 (40) 2.44 (62).63 (16) 1.26 (32).11 (2.8).79 (20).20 (5) * up Material Vacuum ups POTK Vacuum up ssemblies Model Number Index (old Items are Stocked) POTK - 25 - NR Installation Mounting Thread Tube I.. up iameter TK itting up Screw Mounting Included in Kit (mm) Part Number Only Thread Min. Tube I imensions POTK-20 Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. 20 TK-20 P-20-M5 M8x1.25.157 (4) 25, 30, 35, 40 TK-25 P-25/40-M6 M10x1.5 emale.157 (4) M8x1.25 up Screw.197 ia. Ø (5) SW12.118 ia. Ø (3) up iameter (mm) 20 (20) 25 (25) 30 (30) 35 (35) 40 (40) (old Items are Stocked) POTK-25 thru POTK-40 M10x1.5 SW14 up Screw.197 ia. Ø (5) up Material Stocked NR Nitrile Rubber vailable (onsult actory) U Urethane.118 ia. Ø (3) 101 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information & imensions POYK Vacuum up ssemblies 90 arbed dapter for PO ups Model Number Ø POYK-20-*.79 (20) 1.30 (33).55 (14).87 (22).07 (1.7).39 (10).63 (16) POYK-25-*.98 (25) 1.81 (46).79 (20) 1.26 (32).04 (1.1).39 (10).63 (16) POYK-30-* 1.18 (30) 1.73 (44).79 (20) 1.26 (32).05 (1.3).39 (10).63 (16) POYK-35-* 1.38 (35) 1.73 (44).79 (20) 1.26 (32).06 (1.6).39 (10).63 (16) POYK-40-* 1.57 (40) 1.81 (46).79 (20) 1.26 (32).11 (2.8).39 (10).63 (16) * up Material Vacuum ups POYK Vacuum up ssemblies Model Number Index (old Items are Stocked) POYK - 20 - NR Installation Mounting Thread up Screw up iameter YK itting up Screw Mounting Included in Kit (mm) Part Number Only Thread Min. Tube I imensions POYK-20.197 ia. Ø (5).118 ia. Ø (3) Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent Tube I.. vacuum leakage. Tube I.. listed below is a recommended minimum value, for that cup range, to optimize response time of the system. Your requirements may vary. 20 YK-20 P-20-M5 M4x0.7 emale.157 (4) 25, 30, 35, 40 YK-25 P-25/40-M6 M6x1.0 emale.157 (4) M4x0.7 up iameter (mm) 20 (20) 25 (25) 30 (30) 35 (35) 40 (40) (old Items are Stocked) POYK-25 thru POYK-40.197 ia. Ø (5).118 ia. Ø (3) up Material Stocked NR Nitrile Rubber vailable (onsult actory) U Urethane M6x1.0 102 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information & imensions POTYS Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Shown are interchangable connectors & plugs for port connections. Vacuum ups POTYS Vacuum up ssemblies Mounting Thread ulkhead Level ompensator itting for PO ups Interchangable* Pushlock Tube itting arb itting Plug * Not included with assembly. (old Items are Stocked) up iameter TYS ssembly Port 1 2 Included in Kit (mm) Part Number Stroke Thread lbf (N) lbf (N) imensions POTYS25 thru POTYS40 TYS-20-6 6mm.56 (2.5).79 (3.4) 25, 30, 35, 40 TYS-20-15 15mm M5x0.8.56 (2.5) 1.2 (4.9) TYS-20-30 30mm.67 (2.9) 1.4 (5.9) M14x1 M5x0.8 M5x0.8 Model Number Index (old Items are Stocked) POTYS 25 6 NR SW12.20 (5) SW19 SW17 up iameter (mm) Stroke 25 (25) 30 (30) 6, 15, 30 35 (35) 40 (40) Model Wt Ø Number oz. (g) POTYS256*.98 (25) 3.07 (78).67 (17).39 (10).04 (1.1).24 (6).20 (5) 1.42 (36) 2.3 (66) POTYS2515*.98 (25) 3.43 (87).67 (17).39 (10).04 (1.1).59 (15).20 (5) 1.42 (36) 2.5 (71) POTYS2530*.98 (25) 4.88 (124).67 (17).39 (10).04 (1.1) 1.18 (30).20 (5) 2.28 (58) 3.4 (96) POTYS306* 1.18 (30) 2.99 (76).67 (17).39 (10).05 (1.3).24 (6).20 (5) 1.42 (36) 2.4 (67) POTYS3015* 1.18 (30) 3.35 (85).67 (17).39 (10).05 (1.3).59 (15).20 (5) 1.42 (36) 2.5 (72) POTYS3030* 1.18 (30) 4.80 (122).67 (17).39 (10).05 (1.3) 1.18 (30).20 (5) 2.28 (58) 3.5 (97) POTYS356* 1.38 (35) 2.99 (76).67 (17).39 (10).06 (1.6).24 (6).20 (5) 1.42 (36) 2.5 (71) POTYS3515* 1.38 (35) 3.35 (85).67 (17).39 (10).06 (1.6).59 (15).20 (5) 1.42 (36) 2.6 (74) POTYS3530* 1.38 (35) 4.80 (122).67 (17).39 (10).06 (1.6) 1.18 (30).20 (5) 2.28 (58) 3.6 (99) POTYS406* 1.57 (40) 3.07 (78).67 (17).39 (10).11 (2.8).24 (6).20 (5) 1.42 (36) 2.5 (71) POTYS4015* 1.57 (40) 3.43 (87).67 (17).39 (10).11 (2.8).59 (15).20 (5) 1.42 (36) 2.7 (76) POTYS4030* 1.57 (40) 4.88 (124).67 (17).39 (10).11 (2.8) 1.18 (30).20 (5) 2.28 (58) 3.6 (101) * up Material up Material Stocked NR Nitrile Rubber vailable (onsult actory) U Urethane ompression orce 1 0% of Stroke 2 100% of Stroke 103 Parker annifin orporation ivision

atalog 0802-2/US eatures P Ring Vacuum ups P Series Vacuum ups Ring suction cups with quality, friendly materials. Inherent symetrical design provides stability during high speed transfer. PM Series Male Thread onnector Simple male connection for low profile applications. Material: luminum. Vacuum ups P Vacuum ups eatures Ring esign Stable ompensation for Transfer Minimum ontact 28mm to 50mm iameters pplications These ring suction cups are popular in / V manufacturing and semi-conductor wafer handling applications. The small edge design minimizes contact with the product. The short stroke minimizes response time and provides stability during transfer in high speed production. P Series emale Thread onnector Simple female connection for low profile applications. Material: luminum. 104 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information Model Number Index (ups Only) (old Items are Stocked) imensions Model Number Specifications up I.. (mm) 20 (20) 23 (23) 29.5 (29.5) 34 (34) 38 (38) 46 (46) Ø Vacuum ups P Vacuum ups P - 23 - NR P20*.79 (20) 1.30 (33).26 (6.5).08 (2) P23*.91 (23) 1.43 (37).20 (5).01 (3) P29.5* 1.16 (29.5) 1.71 (43.5).20 (5).01 (3) P34* 1.34 (34) 1.89 (48).28 (7).08 (2) P38* 1.50 (38) 2.05 (52).20 (5).01 (3) P46* 1.81 (46) 2.28 (58).28 (7).08 (2) * up Material up Material Stocked SI Silicone vailable (onsult actory) NR Nitrile Rubber SI Silicone S U Urethane KM louro Rubber S igh Temp NR SI SI U KM S Suction up Silicone louro Silicone Material Nitrile Silicone Urethane S* Rubber igh Temp Operating -20 to +120-60 to +250-60 to +250-30 to +120-10 to +230-50 to +300 Temperature ( ) lack / lack / olor lack White lue rey Red ot White ot ardness, 55 ±5 55 ±5 55 ±5 55 ±5 70 ±5 55 ±5 Shore ( Sh) lectrical 800 (Ωm) to 1000 Wear Tear Strength ging Ozone asoline Oil cid lkali hemical Mechanical = excellent; = very good; = good; = medium; = poor; = not recommended * S: lectric Static issipative Material 105 Parker annifin orporation ivision

atalog 0802-2/US ssembly Ordering Information PM & P Vacuum up ssemblies Male older for P ups Vacuum ups P Vacuum ups Thread onnection M Male emale P up iameter (mm) older Part Number Mounting Thread 20 M-20 M8x1.25 23 M-23 M8x1.25 29.5 M-29.5 M8x1.25 emale older for P ups (old Items are Stocked) 34 M-34 M8x1.25 38 M-38 M8x1.25 46 M-46 M8x1.25 (old Items are Stocked) P M - 23 - NR P up iameter (mm) older Part Number Vacuum Port Mounting Thread 20-20 M5 emale M30x1.0 23-23 M5 emale M30x1.0 29.5-29.5 M5 emale M30x1.0 34-34 M5 emale M30x1.0 38-38 M5 emale M30x1.0 Model Number Index (old Items are Stocked) up I.. (mm) 20 (20) up Material Stocked 23 (23) SI Silicone 29.5 (29.5) vailable 34 (34) (onsult actory) 38 (38) NR Nitrile Rubber 46 (46) R hloroprene SI Silicone S U Urethane KM louro Rubber S igh Temp 106 Parker annifin orporation ivision

atalog 0802-2/US imensions PM imensions M5 Vacuum Port M8 Model Number Ø PM-20-* 1.57 (40) 0.87 (22).79 (20) 1.02 (26) 0.12 (3).39 (10) PM-23-* 1.77 (45).85 (21.5).91 (23) 1.18 (30).10 (2.5).39 (10) PM-29.5-* 1.97 (50).85 (21.5) 1.16 (29.5) 1.44 (36.5).10 (2.5).39 (10) PM-34-* 2.28 (58).85 (21.5) 1.34 (34) 1.61 (41).11 (2.9).39 (10) PM-38-* 2.36 (60).85 (21.5) 1.50 (38) 1.77 (45).10 (2.5).39 (10) PM-46-* 2.71 (69).87 (22) 1.81 (46) 2.28 (58).12 (3).39 (10) * up Material P imensions M5 Vacuum Port M30x1.0 Vacuum ups PM & P Vacuum up ssemblies Model Number Ø J P-20-* 1.57 (40).96 (24.5).79 (20) 1.02 (26).11 (3).63 (16).57 (14.5).45 (11.5).39 (10) P-23-* 1.57 (40).94 (24).91 (23) 1.18 (30).10 (2.5).79 (20).57 (14.5).35 (9).39 (10) P-29.5-* 1.83 (46.5).94 (24) 1.16 (29.5) 1.44 (36.5).10 (2.5) 1.04 (6.5).57 (14.5).35 (9).39 (10) P-34-* 2.05 (52) 1.02 (26) 1.34 (34) 1.61 (41).11 (3) 1.12 (28.5).57 (14.5).35 (9).39 (10) P-38-* 2.20 (56) 1.00 (25.4) 1.50 (38) 1.77 (45).10 (2.5) 1.12 (28.5).57 (14.5).35 (9).39 (10) * up Material J 107 Parker annifin orporation ivision

atalog 0802-2/US eatures & Specifications P Sponge Vacuum ups P Series Vacuum ups Sponge cup for lightweight product having irregular or uneven surfaces where vacuum leakage is a concern. The sponge material conforms to the surface minimizing vacuum leakage while protecting product surface. PTM Series Male Thread onnector Simple male connection for low profile positions secured to a plate or bracket. itting Material: luminum or 303 SUS. Vacuum ups P Vacuum ups eatures S Sponge Material (lectric Static issipative Material) onforms to Product lectronic ssembly and Packaging 4mm to 15mm iameters pplications These sponge cups are for small lightweight products where flat surfaces are unavailable for conventional flat cups. The 20 durometer sponge material easily conforms to the product surface creating an adequate vacuum level for transfer; like or SP chips. The cups are available in silicon static dissipative materials. Specifications Suction up Material R Solder ircuit oard SI Operating -30 to +140-60 to +250 Temperature ( ) olor lack lack ardness, 20 ±5 20 ±5 Shore ( Sh) lectrical 10 4 to 10 5 10 4 to 10 (Ωcm) 5 Wear Tear Strength ging Ozone cid lkali hemical Mechanical = excellent; = very good; = good; = medium; = poor; = not recommended 108 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information Model Number Index (ups Only) (old Items are Stocked) P - 4 - R up iameter (mm) 4 (4) 6.5 (6.5) 8 (8) 9.5 (9.5) 12 (12) 15 (15) Male itting for P ups imensions Model Number Ø Ø P-4-*.16 (4).002 (1.5).18 (4.5) P-6.5-*.27 (6.5).13 (3.2).18 (4.5) P-8-*.31 (8).13 (3.2).18 (4.5) P-9.5-* 37 (9.5).16 (4).18 (4.5) P-12-*.47 (12).16 (4).18 (4.5) P-15-*.59 (15).20 (5).18 (4.5) * up Material up Material Stocked R hloroprene S* vailable (onsult actory) SI Silicone S* Vacuum ups P Vacuum ups & PTM ssemblies Model Number Index (old Items are Stocked) PTM - 4 - R - M5 up iameter (mm) 4 (4) 6.5 (6.5) 8 (8) 9.5 (9.5) 12 (12) 15 (15) imensions SW up Material Stocked R hloroprene S* vailable (onsult actory) SI Silicone S* * S - lectric Static issipative Material * S - lectric Static issipative Material (old Items are Stocked).079 (2).039 (1).20 (5).25 (6.35) itting Thread () M5 M5 Included in Kit up iameter (mm) Mounting Thread ode Mounting Thread TM Part Number Tube I 4 M5 M5x0.8 Male TM-4-M5.098 (2.5) 6.5, 8 M5 M5x0.8 Male TM-6.5-M5.098 (2.5) 9.5 M5 M5x0.8 Male TM-9.5-M5.098 (2.5) 12, 15 M5 M5x0.8 Male TM-12-M5.098 (2.5) Model Number Ø SW PTM-4-*-.16 (4) M5.16 (4) PTM-6.5-*-.27 (6.5) M5.27 (6.5) PTM-8-*-.31 (8) M5.27 (6.5) PTM-9.5-*-.37 (9.5) M5.37 (9.5) PTM-12-*-.47 (12) M5.47 (12) PTM-15-*-.59 (15) M5.59 (15) * up Material Thread Size 109 Parker annifin orporation ivision

atalog 0802-2/US eatures P oil, Paper, ilm Vacuum ups P Series Vacuum ups These cups have an ultra thin edge that creates the vacuum seal by conforming to the shape of the product. The complete foot pattern to the center of the cup prevents the vacuum from deforming or puckering thin, flexible products. PTM Series Male Thread onnector Simple male connection for low profile positions secured to a plate or bracket. UN, NPT,, metric threads. itting Material: luminum. PTK Series arbed ulkhead Top stem connectors secured with jam nuts and allow tubing connections at the top side. Nickel plated brass materials. Vacuum ups P Vacuum ups eatures Ultra Thin Lip esign up onforms to Product 10mm to 50mm iameter pplications The P ups are ideal for paper feeding, plastic bags and foil. The choice between the 10 & 10, 15 & 15, 20 & 20, 30 & 30 is application dependent. The cups have a thinner lip design than the cups. This thinner lip design is more suited to plastic bags and foils. The design is better suited for thin rigid items like solar battery cells. PYK Series 90 arbed dapter Side stem connectors allow you to secure the stem with a bolt through a plate or L bracket to allow the tube connection from the side port. Nickel plated brass materials. 110 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information Model Number Index (ups Only) (old Items are Stocked) Specifications up iameter / eflection (mm) 10 (10 / 0.6)* 10 (10 / 0.3)* 15 (15 / 0.9)* 15 (15 / 0.5)* 20 (20 / 1.2)* 20 (20 / 0.8)* 30 (30 / 1.8)* 30 (30 / 0.3)* 40 (40) 50 (50) * ups with the same diameter have different cup deflection. Vacuum ups P Vacuum ups P - 10 - NR NR R SI SI U KM Suction up Silicone louro Material Nitrile hloroprene Silicone Urethane S* Rubber Operating -20-30 -60-60 -30-10 Temperature ( ) to +120 to +140 to +250 to +250 to +120 to +230 olor lack reen White ardness, Shore ( Sh) lack / lack / lue Red ot White ot 55 ±5 55 ±5 55 ±5 55 ±5 55 ±5 70 ±5 lectrical 800 (Ωm) to 1000 Wear Tear Strength ging Ozone asoline Oil cid lkali hemical Mechanical = excellent; = very good; = good; = medium; = poor; = not recommended * S: lectric Static issipative Material up Material Standard NR Nitrile Rubber SI Silicone vailable (onsult actory) U Urethane R hloroprene SI Silicone S KM louro Rubber 111 Parker annifin orporation ivision

atalog 0802-2/US pplications & Technical ata pplication uide Thin - Smooth Surfaces Products With Smooth Surfaces Products With Micron Thickness Main ata for P ups up Model up iameter rea eflection (S) Number cm 2 (mm) P-10-*.39 (10) 0.79 0.6 P-15-*.59 (15) 1.77 0.9 P-20-*.79 (20) 3.14 1.2 P-10-*.39 (10) 0.79 0.3 P-15-*.59 (15) 1.77 0.5 P-20-*.79 (20) 3.14 0.8 P-30-* 1.18 (30) 7.19 0.3 P-30-* 1.18 (30) 7.07 1.8 P-40-* 1.57 (40) 12.60 2.4 P-50-* 1.57 (40) 19.60 3.0 * up Material Volume V Vacuum ups P Vacuum ups up eflection When Opening Plastic or Paper ags, Offset ups S 112 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions P-10 and P-20 Model Number Ø Ø Ø Ø J P-10-*.39 (10).16 (4).08 (2).33 (8.5).30 (7.5).02 (.6).15 (4).08 (2).24 (6) P-15-*.59 (15).16 (4).08 (2).33 (8.5).30 (7.5).04 (.9).15 (4).08 (2).24 (6) P-20-*.79 (20).16 (4).08 (2).35 (9).39 (10).05 (1.2).15 (4).08 (2).24 (6) P-10-*.39 (10).16 (4).08 (2).33 (8.5).30 (7.5).01 (.3).15 (4).08 (2).24 (6) P-15-*.59 (15).16 (4).08 (2).33 (8.5).30 (7.5).02 (.5).15 (4).08 (2).24 (6) P-20-*.79 (20).16 (4).08 (2).35 (9).39 (10).03 (.8).15 (4).08 (2).24 (6) P-30-* 1.18 (30).24 (6).12 (3).59 (15).43 (11).06 (1.5).28 (7).15 (4).39 (10) P-30-* 1.18 (30) 1.02 (26).12 (3).87 (22) 1.02 (26).07 (1.8).63 (16).31 (8) * up Material J P-30 thru P-50 Vacuum ups P Vacuum ups P-10 and P-30 M6x1.0 P-40-* 1.57 (40) 1.02 (26).12 (3).87 (22) 1.02 (26).09 (2.4).63 (16).31 (8) P-50-* 1.97 (50) 1.02 (26).12 (3).87 (22) 1.02 (26).12 (3).63 (16).31 (8) J 113 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information PTM Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. shown below is a recommended minimum value to optimize response time of the system. Your requirements may vary. Mounting Thread Tube I.. Male itting for P ups Vacuum ups PTM Vacuum up ssemblies PTM - 10 - NR - M5 up iameter Mounting Mounting TM itting Included in Kit (mm) Thread ode Thread Part Number Tube I (old Items are Stocked) Model Number Index (old Items are Stocked) up iameter (mm) 10 (10) 10 (10) 15 (15) 15 (15) 20 (20) 20 (20) 30 (30) 30 (30) 40 (40) 50 (50) up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) U Urethane R hloroprene SI Silicone S KM louro Rubber 10, 15, 20, 30 M5 M5X0.8 Male TM-5-M5.157 (4) 30, 40, 50 1 1/8 SPP Male -1M-M6.157 (4) Mounting Thread M5 M5 1 1/8 SPP See hart elow 114 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions PTM-10 thru PTM-20 and PTM-10 thru PTM-30 SW8 M5: M5x0.8 Vacuum ups PTM Vacuum up ssemblies PTM-30 thru PTM-50 Model Number Ø PTM-10-*-.39 (10).44 (11).18 (4.5).14 (3.5).02 (.6) PTM-15-*-.59 (15).44 (11).18 (4.5).14 (3.5).04 (.9) PTM-20-*-.79 (20).53 (13.5).18 (4.5).14 (3.5).05 (1.2) PTM-10-*-.39 (10).44 (11).18 (4.5).14 (3.5).01 (.3) PTM-15-*-.59 (15).44 (11).18 (4.5).14 (3.5).02 (.5) PTM-20-*-.79 (20).53 (13.5).18 (4.5).14 (3.5).03 (.8) PTM-30-*- 1.18 (30).57 (14.5).51 (13).83 (21).06 (1.5) PTM-30-*- 1.18 (30) 1.22 (31).51 (13).83 (21).07 (1.8).12 (3).59 (15).87 (22) PTM-40-*- 1.57 (40) 1.22 (31).51 (13).83 (21).09 (2.4).12 (3).59 (15).87 (22) PTM-50-*- 1.97 (50) 1.22 (31).51 (13).83 (21).12 (3).12 (3).59 (15).87 (22) * up Material Thread Size 1: 1/8 SPP 115 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information PTK Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. shown below is a recommended minimum value to optimize response time of the system. Your requirements may vary. arbed ulkhead for P ups Vacuum ups PTK Vacuum up ssemblies up iameter Mounting TK itting Included in Kit (mm) Thread Part Number Tube I Mounting Thread Tube I.. 10, 15, 20, 30 M9x1.0 Male TK-5.157 (4) 30, 40, 50 M10x1.5 Male TK-25.157 (4) Model Number Index (old Items are Stocked) PTK - 10 - NR (old Items are Stocked) up iameter (mm) 10 (10) 10 (10) 15 (15) 15 (15) 20 (20) 20 (20) 30 (30) 30 (30) 40 (40) 50 (50) up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) U Urethane R hloroprene SI Silicone S KM louro Rubber 116 Parker annifin orporation ivision

atalog 0802-2/US imensions imensions PTK-10 thru PTK-20 and PTK-10 thru PTK-30.197 ia. Ø (5) M9x1.0 SW12 SW10.118 ia. Ø (3) Vacuum ups PTK Vacuum up ssemblies PTK-30 thru PTK-50.197 ia. Ø (5) M10x1.5 SW14 SW14 Model Number Ø PTK-10-*.39 (10) 1.81 (46).63 (16).89 (22.5).02 (.6).61 (15.5).12 (3) PTK-15-*.59 (15) 1.81 (46).63 (16).89 (22.5).04 (.9).61 (15.5).12 (3) PTK-20-*.79 (20) 1.91 (48.5).63 (16).89 (22.5).05 (1.2).61 (15.5).12 (3) PTK-10-*.39 (10) 1.81 (46).63 (16).89 (22.5).01 (.3).61 (15.5).12 (3) PTK-15-*.59 (15) 1.81 (46).63 (16).89 (22.5).02 (.5).61 (15.5).12 (3) PTK-20-*.79 (20) 1.91 (48.5).63 (16).89 (22.5).03 (.8).61 (15.5).12 (3) PTK-30-* 1.18 (30) 2.61 (66.2).63 (16).89 (22.5).06 (1.5).79 (20).20 (5) PTK-30-* 1.18 (30) 2.61 (66.2).63 (16) 1.27 (32.2).07 (1.8).79 (20).20 (5) PTK-40-* 1.57 (40) 2.61 (66.2).63 (16) 1.27 (32.2).09 (2.4).79 (20).20 (5) PTK-50-* 1.97 (50) 2.61 (66.2).63 (16) 1.27 (32.2).1.2 (3).79 (20).20 (5) * up Material.118 ia. Ø (3) 117 Parker annifin orporation ivision

atalog 0802-2/US Ordering Information PYK Vacuum up ssemblies Installation Note: When installing cup assemblies, use a sealant material to secure the assembly and prevent vacuum leakage. Tube I.. shown below is a recommended minimum value to optimize response time of the system. Your requirements may vary. Mounting Thread Tube I.. 90 arbed dapter for P ups Vacuum ups PYK Vacuum up ssemblies up iameter Mounting YK itting Included in Kit (mm) Thread Part Number Tube I 10, 15, 20, 30 M4x0.7 emale YK-5.157 (4) 30, 40, 50 M6x1.0 emale YK-25.157 (4) Model Number Index (old Items are Stocked) PYK - 10 - NR up iameter (mm) 10 (10) 10 (10) 15 (15) 15 (15) 20 (20) 20 (20) 30 (30) 30 (30) 40 (40) 50 (50) (old Items are Stocked) up Material Stocked NR Nitrile Rubber SI Silicone vailable (onsult actory) U Urethane R hloroprene SI Silicone S KM louro Rubber 118 Parker annifin orporation ivision

2024 © autodocbox.com Privacy Policy | Terms of Service | Feedback