Series 4XSHM 18 Frame Driver Specifications: DISCHARGE... 4, 125 lb. Horizontal Flange Slotted to accomodate 100mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE... Cast Iron ASTM A-48, Class 30 WEAR RING... C954 Lead-Free Bronze MOTOR HOUSING... Cast Iron ASTM A-48, Class 30 SEAL PLATE... Cast Iron ASTM A-48, Class 30 IMPELLER: Design... Enclosed Monovane, With Pump Out Vanes on Back Side. Dynamically Balanced ISO G6.3 Material... Ductile Iron ASTM A-536, 65-45-12 SHAFT... 416 Stainless Steel O RINGS... Buna-N HARDWARE... 300 Series Stainless Steel LIFTING BAIL... 300 Series Stainless Steel PAINT SEAL:... Axalta Corlar Epoxy, Two Coats Design... Tandem Mechanical, Oil Filled Reservoir. Material: Inboard... Rotating Faces - Carbon Stationary Faces - Ceramic Material: Outboard... Rotating Faces - Silicon Carbide Stationary Faces - Silicon Carbide Elastomer - Buna-N Hardware - 300 Series Stainless CORD ENTRY... Custom Molded, Quick Connected for Sealing and Strain Relief POWER CORD... CSA Certifi ed Submersible Power Cable 2000V - Ordered Separately SPEED... 1750 RPM UPPER BEARING: Design... Single Row, Ball, Oil Lubricated Load... Radial LOWER BEARING: Design... Double Row, Ball, Oil Lubricated Load... Radial & Thrust MOTOR: Design... NEMA B - Three Phase Torque Curve NEMA L - Single Phase Torque Curve Oil-Filled, Squirrel Cage Induction, Inverter Duty rated per NEMA MG1 Insulation... Class H, Varnish & Magnet Wire SINGLE PHASE... Requires overload protection to be included in control panel. Requires start components to be included in panel. Provided with pump. THREE PHASE... Requires overload protection to be included in control panel. MOISTURE SENSOR... Normally Open (N/O), Requires Relay in Control Panel TEMPERATURE SENSOR... Three Normally Closed (N/C). To be wired in series with control circuit. OPTIONAL EQUIPMENT... Seal Material, Impeller Trims, Cord Length, Leg Kit MARKINGS... CSA WEIGHT... 231 lbs (105 Kg) NOISE EMISSION MAX... In-Air 65 db-a SUBMERGENCE... Max Depth 66ft (20m) RECOMMENDED: Accessories... Break Away Fitting (BAF) Check Valve Control Panel Series: 4XSHM 3-10HP, 1750RPM, 60Hz Explosion Proof, Class 1, Division 1, Groups C & D, T4 DESCRIPTION: Canadian Standards Association File No. LR16567 This product may be covered by one or more of the following patents and other patent(s) pending: US Patent 7,931,473 Sample Specifi cations: Section Page G. SUBMERSIBLE NON-CLOG SEWAGE PUMP DESIGNED FOR RAW SEWAGE APPLICATIONS. 21 4/17
Series 4XSHM 21 Frame Driver Series: 4XSHM 15-30HP, 1750RPM, 60Hz 7.5-20HP, 1150RPM, 60Hz Explosion Proof, Class 1, Division 1, Groups C & D, T4 DESCRIPTION: Canadian Standards Association File No. LR16567 This product may be covered by one or more of the following patents and other patent(s) pending: US Patent 7,931,473 Sample Specifi cations: Section Page G. SUBMERSIBLE NON-CLOG SEWAGE PUMP DESIGNED FOR RAW SEWAGE APPLICATIONS. Specifications: DISCHARGE... 4, 125 lb. Horizontal Flange Slotted to accomodate 100mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE... Cast Iron ASTM A-48, Class 30 WEAR RING... C954 Lead-Free Bronze MOTOR HOUSING... Cast Iron ASTM A-48, Class 30 SEAL PLATE... Cast Iron ASTM A-48, Class 30 IMPELLER: Design... Enclosed Monovane, With Pump Out Vanes on Back Side. Dynamically Balanced ISO G6.3 Material... Ductile Iron ASTM A-536, 65-45-12 SHAFT... 416 Stainless Steel O RINGS... Buna-N HARDWARE... 300 Series Stainless Steel LIFTING BAIL... 300 Series Stainless Steel PAINT SEAL:... Axalta Corlar Epoxy, Two Coats Design... Tandem Mechanical, Oil Filled Reservoir. Material: Inboard... Rotating Faces - Carbon Stationary Faces - Ceramic Material: Outboard... Rotating Faces - Silicon Carbide Stationary Faces - Silicon Carbide Elastomer - Buna-N Hardware - 300 Series Stainless CORD ENTRY... Custom Molded, Quick Connected for Sealing and Strain Relief POWER CORD... CSA Certifi ed Submersible Power Cable 2000V - Ordered Separately SPEED... 1750 or 1150 RPM UPPER BEARING: Design... Single Row, Ball, Oil Lubricated Load... Radial LOWER BEARING: Design... Double Row, Ball, Oil Lubricated Load... Radial & Thrust MOTOR: Design... NEMA B Three Phase Torque Curve. Oil-Filled, Squirrel Cage Induction, Inverter Duty rated per NEMA MG1 Insulation... Class H, Varnish & Magnet Wire THREE PHASE... Requires overload protection to be included in control panel. MOISTURE SENSOR... Normally Open (N/O), Requires Relay in Control Panel TEMPERATURE SENSOR... Three Normally Closed (N/C). To be wired in series with control circuit. OPTIONAL EQUIPMENT... Seal Material, Impeller Trims, Cord Length, Leg Kit MARKINGS... CSA WEIGHT... 461 lbs (209 Kg) NOISE EMISSION MAX... In-Air 80 db-a SUBMERGENCE... Max Depth 66ft (20m) RECOMMENDED: Accessories... Break Away Fitting (BAF) Check Valve Control Panel 22 4/17
Series 4XSHM 28 Frame Driver Specifications: DISCHARGE... 4, 125 lb. Horizontal Flange Slotted to accommodate 100mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE... Cast Iron ASTM A-48, Class 30 WEAR RING... C954 Lead-Free Bronze MOTOR HOUSING... Cast Iron ASTM A-48, Class 30 SEAL PLATE... Ductile Iron ASTM A-536, 65-45-12 IMPELLER: Design... Enclosed Monovane, With Pump Out Vanes on Back Side. Dynamically Balanced ISO G6.3 Material... Ductile Iron ASTM A-536, 65-45-12 SHAFT... 416 Stainless Steel O RINGS... Buna-N HARDWARE... 300 Series Stainless Steel LIFTING BAIL... 300 Series Stainless Steel PAINT SEAL:... Axalta Corlar Epoxy, Two Coats Design... Tandem Mechanical, Oil Filled Reservoir. Material: Inboard... Rotating Faces - Carbon Stationary Faces - Ceramic Material: Outboard... Rotating Faces - Silicon Carbide Stationary Faces - Silicon Carbide Elastomer - Buna-N Hardware - 300 Series Stainless CORD ENTRY... 50 ft. (12.1m) Cord. Rigid quick change epoxy-potted housing POWER CORD... CSA Certifi ed Submersible Power Cable 2000V - Ordered Separately SPEED... 1750 or 1150 RPM UPPER BEARING: Design... Single Row, Ball, Oil Lubricated Load... Radial LOWER BEARING: Design... Double Row, Ball, Oil Lubricated Load... Radial & Thrust MOTOR: Design... NEMA B Three Phase Torque Curve. Oil-Filled, Squirrel Cage Induction, Inverter Duty rated per NEMA MG1 Insulation... Class H Varnish & Magnet Wire THREE PHASE... Requires overload protection to be included in control panel. MOISTURE SENSOR... Normally Open (N/O), Requires Relay in Control Panel TEMPERATURE SENSOR... Three Normally Closed (N/C). To be wired in series with control circuit. OPTIONAL EQUIPMENT... Seal Material, Impeller Trims, Cord Length, Leg Kit MARKINGS... CSA WEIGHT... 842 lbs (382 Kg) SUBMERGENCE... Max Depth 66ft (20m) RECOMMENDED: Accessories... Break Away Fitting (BAF) Check Valve Control Panel Series: 4XSHM 20-60HP, 1750RPM, 60Hz 20-30HP, 1150RPM, 60Hz Explosion Proof, Class 1, Division 1, Groups C & D, T4 DESCRIPTION: Canadian Standards Association File No. LR16567 Sample Specifi cations: Section Page G. SUBMERSIBLE NON-CLOG SEWAGE PUMP DESIGNED FOR RAW SEWAGE APPLICATIONS. 23 3/17
Series 4XSHM 32 Frame Driver Series: 4XSHM 75HP, 1750RPM, 60Hz Explosion Proof, Class 1, Division 1, Groups C & D, T4 C Canadian Standards Association File No. LR16567 US Sample Specifi cations: Section Page G. DESCRIPTION: SUBMERSIBLE NON-CLOG SEWAGE PUMP DESIGNED FOR RAW SEWAGE APPLICATIONS. Specifications: DISCHARGE... 4, 125 lb. Horizontal Flange Slotted to accomodate 100mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE... Cast Iron ASTM A-48, Class 30 WEAR RING... C954 Lead-Free Bronze MOTOR HOUSING... Cast Iron ASTM A-48, Class 30 SEAL PLATE... Cast Iron ASTM A-48, Class 30 IMPELLER: Design... Enclosed Monovane, With Pump Out Vanes on Back Side. Dynamically Balanced ISO G6.3 Material... Ductile Iron ASTM A-536, 65-45-12 SHAFT... 416 Stainless Steel O RINGS... Buna-N HARDWARE... 300 Series Stainless Steel LIFTING BAIL... 300 Series Stainless Steel PAINT SEAL:... Axalta Corlar Epoxy, Two Coats Design... Tandem Mechanical, Oil Filled Reservoir. Material: Inboard... Rotating Faces - Carbon Stationary Faces - Ceramic Material: Outboard... Rotating Faces - Silicon Carbide Stationary Faces - Silicon Carbide Elastomer - Buna-N Hardware - 300 Series Stainless CORD ENTRY... 50 ft. (12.1m) Cord. Rigid quick change epoxy-potted housing POWER CORD... CSA Certifi ed Submersible Power Cable 2000V - Ordered Separately SPEED... 1750 RPM UPPER BEARING: Design... Single Row, Ball, Oil Lubricated Load... Radial LOWER BEARING: Design... Double Row, Ball, Oil Lubricated Load... Radial & Thrust MOTOR: Design... NEMA B Three Phase Torque Curve. Oil-Filled, Squirrel Cage Induction, Inverter Duty rated per NEMA MG1 Insulation... Class H, Varnish & Magnet Wire THREE PHASE... Requires overload protection to be included in control panel. MOISTURE SENSOR... Normally Open (N/O), Requires Relay in Control Panel TEMPERATURE SENSOR... Three Normally Closed (N/C). To be wired in series with control circuit. OPTIONAL EQUIPMENT... Seal Material, Impeller Trims, Cord Length, Leg Kit MARKINGS... CSA WEIGHT... 1529 lbs (694 Kg) SUBMERGENCE... Max Depth 66ft (20m) RECOMMENDED: Accessories... Break Away Fitting (BAF) Check Valve Control Panel 24 3/17
Series 4XSHMS 18 Frame Driver inches (mm) Optional Leg Kit - p/n 125506 IMPORTANT! 1.) MOISTURE AND TEMPERATURE SENSORS MUST BE CONNECTED TO VALI THE CSA LISTING. 2.) A SPECIAL MOISTURE SENSOR RELAY IS REQUIRED IN THE CONTROL PANEL FOR PROPER OPERATION OF THE MOISTURE SENSORS. CONTACT BARNES PUMPS FOR INFORMATION CONCERNING MOISTURE SENSING RELAYS FOR CUSTOMER SUPPLIED CONTROL PANELS. 3.) THESE PUMPS ARE CSA LISTED FOR PUMPING WATER AND WASTEWATER. DO NOT USE TO PUMP FLAMMABLE LIQUIDS. NOT SUITABLE FOR ENVIRONMENTS CONTAINING GASOLINE OR HEXANE. 4.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT INTENDED FOR USE IN SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED MEDIA IS A COMMON OCCURRENCE. 5.) A NON-SPARKING BREAKAWAY FITTING MUST BE USED TO VALI THE EXPLOSION PROOF LISTING. 25 5/17
Series 4XSHMC 18 Frame Driver inches (mm) 21 Frame Driver Optional Leg Kit - p/n 125506 IMPORTANT! 1.) MOISTURE AND TEMPERATURE SENSORS MUST BE CONNECTED TO VALI THE CSA LISTING. 2.) A SPECIAL MOISTURE SENSOR RELAY IS REQUIRED IN THE CONTROL PANEL FOR PROPER OPERATION OF THE MOISTURE SENSORS. CONTACT BARNES PUMPS FOR INFORMATION CONCERNING MOISTURE SENSING RELAYS FOR CUSTOMER SUPPLIED CONTROL PANELS. 3.) THESE PUMPS ARE CSA LISTED FOR PUMPING WATER AND WASTEWATER. DO NOT USE TO PUMP FLAMMABLE LIQUIDS. NOT SUITABLE FOR ENVIRONMENTS CONTAINING GASOLINE OR HEXANE. 4.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT INTENDED FOR USE IN SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED MEDIA IS A COMMON OCCURRENCE. 5.) A NON-SPARKING BREAKAWAY FITTING MUST BE USED TO VALI THE EXPLOSION PROOF LISTING. 26 5/17
Series 4XSHMD 21 Frame Driver inches (mm) 28 Frame Driver Optional Leg Kit - p/n 125506B IMPORTANT! 1.) MOISTURE AND TEMPERATURE SENSORS MUST BE CONNECTED TO VALI THE CSA LISTING. 2.) A SPECIAL MOISTURE SENSOR RELAY IS REQUIRED IN THE CONTROL PANEL FOR PROPER OPERATION OF THE MOISTURE SENSORS. CONTACT BARNES PUMPS FOR INFORMATION CONCERNING MOISTURE SENSING RELAYS FOR CUSTOMER SUPPLIED CONTROL PANELS. 3.) THESE PUMPS ARE CSA LISTED FOR PUMPING WATER AND WASTEWATER. DO NOT USE TO PUMP FLAMMABLE LIQUIDS. NOT SUITABLE FOR ENVIRONMENTS CONTAINING GASOLINE OR HEXANE. 4.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT INTENDED FOR USE IN SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED MEDIA IS A COMMON OCCURRENCE. 5.) A NON-SPARKING BREAKAWAY FITTING MUST BE USED TO VALI THE EXPLOSION PROOF LISTING. 27 5/17
Series 4XSHME 21 Frame Driver inches (mm) 28 Frame Driver Optional Leg Kit - p/n 125506B IMPORTANT! 1.) MOISTURE AND TEMPERATURE SENSORS MUST BE CONNECTED TO VALI THE CSA LISTING. 2.) A SPECIAL MOISTURE SENSOR RELAY IS REQUIRED IN THE CONTROL PANEL FOR PROPER OPERATION OF THE MOISTURE SENSORS. CONTACT BARNES PUMPS FOR INFORMATION CONCERNING MOISTURE SENSING RELAYS FOR CUSTOMER SUPPLIED CONTROL PANELS. 3.) THESE PUMPS ARE CSA LISTED FOR PUMPING WATER AND WASTEWATER. DO NOT USE TO PUMP FLAMMABLE LIQUIDS. NOT SUITABLE FOR ENVIRONMENTS CONTAINING GASOLINE OR HEXANE. 4.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT INTENDED FOR USE IN SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED MEDIA IS A COMMON OCCURRENCE. 5.) A NON-SPARKING BREAKAWAY FITTING MUST BE USED TO VALI THE EXPLOSION PROOF LISTING. 28 5/17
Series 4XSHME 32 Frame Driver inches (mm) Optional Leg Kit - p/n 125506B IMPORTANT! 1.) MOISTURE AND TEMPERATURE SENSORS MUST BE CONNECTED TO VALI THE CSA LISTING. 2.) A SPECIAL MOISTURE SENSOR RELAY IS REQUIRED IN THE CONTROL PANEL FOR PROPER OPERATION OF THE MOISTURE SENSORS. CONTACT BARNES PUMPS FOR INFORMATION CONCERNING MOISTURE SENSING RELAYS FOR CUSTOMER SUPPLIED CONTROL PANELS. 3.) THESE PUMPS ARE CSA LISTED FOR PUMPING WATER AND WASTEWATER. DO NOT USE TO PUMP FLAMMABLE LIQUIDS. NOT SUITABLE FOR ENVIRONMENTS CONTAINING GASOLINE OR HEXANE. 4.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT INTENDED FOR USE IN SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED MEDIA IS A COMMON OCCURRENCE. 5.) A NON-SPARKING BREAKAWAY FITTING MUST BE USED TO VALI THE EXPLOSION PROOF LISTING. 29 5/17
Series 4XSHMEA 21 Frame Driver inches (mm) 28 Frame Driver Optional Leg Kit - p/n 125506B IMPORTANT! 1.) MOISTURE AND TEMPERATURE SENSORS MUST BE CONNECTED TO VALI THE CSA LISTING. 2.) A SPECIAL MOISTURE SENSOR RELAY IS REQUIRED IN THE CONTROL PANEL FOR PROPER OPERATION OF THE MOISTURE SENSORS. CONTACT BARNES PUMPS FOR INFORMATION CONCERNING MOISTURE SENSING RELAYS FOR CUSTOMER SUPPLIED CONTROL PANELS. 3.) THESE PUMPS ARE CSA LISTED FOR PUMPING WATER AND WASTEWATER. DO NOT USE TO PUMP FLAMMABLE LIQUIDS. NOT SUITABLE FOR ENVIRONMENTS CONTAINING GASOLINE OR HEXANE. 4.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT INTENDED FOR USE IN SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED MEDIA IS A COMMON OCCURRENCE. 5.) A NON-SPARKING BREAKAWAY FITTING MUST BE USED TO VALI THE EXPLOSION PROOF LISTING. 30 5/17
31 5/12 XSHMS Pump XSHMC Pump MODEL NO PART NO HP VOLT PH Hz RPM (Nom) NEMA START CODE FULL LOAD SERVICE FACTOR SERVICE FACTOR LOCKED ROTOR DRIVER FRAME 4XSHMS3074 133799 3.0 D 14.9 1.2 18.5 59.1 1 60 1750 230 F 14.1 1.2 16.5 66.3 18 125496 12/4-18/4 9.7 1.2 11.4 125496 12/4-18/4 58.2 / 65.8 4XSHMS30N4 133800 3.0 230 3 60 1750 K 9.2 1.2 10.6 18 125496 12/4-18/4 460 4.6 1.2 5.3 32.9 125497 12/4-18/4 4XSHMS3054 133801 3.0 575 3 60 1750 N 4.5 1.2 4.9 37.0 18 125497 12/4-18/4 4XSHMS5074 133802 5.0 D 27.2 1.2 35.6 99.9 1 60 1750 230 F 25.4 1.2 30.2 112.4 18 125498 8/4-18/4 15.8 1.2 18.7 125496 12/4-18/4 82.4 / 92.4 4XSHMS50N4 133803 5.0 230 3 60 1750 J 15.0 1.2 17.2 18 125496 12/4-18/4 460 7.5 1.2 8.6 46.2 125497 12/4-18/4 4XSHMS5054 133804 5.0 575 3 60 1750 J 6.0 1.2 6.9 37.0 18 125497 12/4-18/4 23.8 1.2 28.5 105.9 / 125496 12/4-18/4 4XSHMS75N4 133806 7.5 230 3 60 1750 H 23.7 1.2 27.2 123.6 18 125496 12/4-18/4 460 11.9 1.2 13.6 61.8 125497 12/4-18/4 4XSHMS7554 133807 7.5 575 3 60 1750 H 9.5 1.2 10.9 49.4 18 125497 12/4-18/4 4XSHMC5074 133709 5.0 D 27.2 1.2 35.6 99.9 1 60 1750 230 F 25.4 1.2 30.2 112.4 18 125498 8/4-18/4 15.8 1.2 18.7 125496 12/4-18/4 82.4/92.4 4XSHMC50N4 133710 5.0 230 3 60 1750 J 15.0 1.2 17.2 18 125496 12/4-18/4 460 7.5 1.2 8.6 46.2 125497 12/4-18/4 4XSHMC5054 133711 5.0 575 3 60 1750 J 6.0 1.2 6.9 37.0 18 125497 12/4-18/4 23.8 1.2 28.5 105.9 / 125496 12/4-18/4 4XSHMC75N4 133712 7.5 230 3 60 1750 H 23.7 1.2 27.2 123.6 18 125496 12/4-18/4 460 11.9 1.2 13.6 61.8 125497 12/4-18/4 4XSHMC7554 133713 7.5 575 3 60 1750 H 9.5 1.2 10.9 49.4 18 125497 12/4-18/4 32.2 1.2 41.4 105.9 / 125498 8/4-18/4 4XSHMC100N4 133714 10.0 230 3 60 1750 E 29.8 1.2 35.6 123.6 18 125498 8/4-18/4 460 14.9 1.2 17.8 61.8 125497 12/4-18/4 4XSHMC10054 133715 10.0 575 3 60 1750 E 11.9 1.2 14.2 49.4 18 125497 12/4-18/4 51.8 1.2 59.0 125498 8/4-18/4 206.6 4XSHMC150N4 130051 15.0 230 3 60 1750 E 46.9 1.2 54.3 21 125498 8/4-18/4 460 23.4 1.2 27.2 103.3 125497 12/4-18/4 4XSHMC15054 130052 15.0 575 3 60 1750 E 18.7 1.2 21.7 82.6 21 125497 12/4-18/4 IMPORTANT! Moisture and Temperature sensor leads are integral to power cord. Pump rated for operation at ± 10% voltage at motor. Cord Suffi x: XC - 30 Feet, XF - 50 Feet, XJ - 75 Feet, or XL - 100 Feet. Cord sold separately. CORD P/N CORD SIZE Series 4XSHM
32 3/16 XSHMD Pump MODEL NO PART NO HP VOLT PH Hz RPM (Nom) NEMA START CODE FULL LOAD SERVICE FACTOR SERVICE FACTOR LOCKED ROTOR DRIVER FRAME 51.8 1.2 59.0 125498 8/4-18/4 206.6 4XSHMD150N4 130609 15.0 230 3 60 1750 E 46.9 1.2 54.3 21 125498 8/4-18/4 460 23.4 1.2 27.2 103.3 125497 12/4-18/4 4XSHMD15054 130610 15.0 575 3 60 1750 E 18.7 1.2 21.7 82.6 21 125497 12/4-18/4 4XSHMD20064 131012 20.0 3 60 1750 G 63.0 1.2 74.6 323.0 28 138318 6/4-18/4 4XSHMD20084 130611 20.0 230 53.7 1.2 59.0 125498 8/4-18/4 3 60 1750 J 383.9 21 460 26.9 1.2 29.9 125497 12/4-18/4 4XSHMD20054 130612 20.0 575 3 60 1750 J 21.5 1.2 23.9 153.5 21 125497 12/4-18/4 4XSHMD25094 130613 25.0 77.8 1.2 93.4 3 60 1750 G 230 71.4 1.2 82.3 359.0 28 138319 2/4-18/4 4XSHMD25044 130614 25.0 460 3 60 1750 G 33.2 1.2 38.9 191.9 21 125499 8/4-18/4 4XSHMD25054 130615 25.0 575 3 60 1750 G 26.6 1.2 31.1 153.5 21 125497 12/4-18/4 4XSHMD30094 130616 30.0 93.4 1.2 116.9 3 60 1750 E 230 82.3 1.2 98.7 359.0 28 138319 2/4-18/4 4XSHMD30044 130617 30.0 460 3 60 1750 F 38.9 1.2 45.9 191.9 21 125499 8/4-18/4 4XSHMD30054 130618 30.0 575 3 60 1750 F 31.1 1.2 36.7 153.5 21 125499 8/4-18/4 4XSHMD40034 130619 40.0 230 3 60 1750 E 106.0 1.2 126.4 486.0 28 138319 2/4-18/4 4XSHMD40044 130620 40.0 460 3 60 1750 E 53.0 1.2 63.2 243.0 28 138318 6/4-18/4 4XSHMD40054 130621 40.0 575 3 60 1750 E 42.4 1.2 50.6 194.4 28 138317 8/4-18/4 24.9 1.2 29.6 137.6 125496 4XSHMD75N6 136353 7.5 230 3 60 1150 J 24.0 1.2 27.6 21 12/4-18/4 460 12.0 1.2 13.8 68.8 125497 4XSHMD7556 136354 7.5 575 3 60 1150 J 9.6 1.2 11.0 55.0 21 125497 12/4-18/4 32.9 1.2 41.0 137.6 4XSHMD100N6 136355 10.0 230 3 60 1150 F 30.2 1.2 35.8 21 125498 8/4-18/4 460 15.1 1.2 17.9 68.8 125497 12/4-18/4 4XSHMD10056 136356 10.0 575 3 60 1150 F 12.1 1.2 14.3 55.0 21 125497 12/4-18/4 47.0 1.2 56.8 248.6 4XSHMD150N6 136357 15.0 230 3 60 1150 H 44.1 1.2 51.4 21 125498 8/4-18/4 460 22.0 1.2 25.7 124.3 125497 12/4-18/4 4XSHMD15056 136358 15.0 575 3 60 1150 H 17.6 1.2 20.6 99.4 21 125497 12/4-18/4 IMPORTANT! Moisture and Temperature sensor leads are integral to power cord. Pump rated for operation at ± 10% voltage at motor. Cord Suffi x: XC - 30 Feet, XF - 50 Feet, XJ - 75 Feet, or XL - 100 Feet. Cord sold separately. CORD P/N CORD SIZE Series 4XSHM
33 3/17 XSHME Pump MODEL NO PART NO HP VOLT PH Hz RPM (Nom) NEMA START CODE FULL LOAD 93.4 SERVICE FACTOR SERVICE FACTOR 116.9 LOCKED ROTOR DRIVER FRAME 4XSHME30094 139420XP 30.0 3 60 1750 E 1.2 230 82.3 98.7 359.0 28 138319 2/4-18/4 4XSHME30044 139421XP 30.0 460 3 60 1750 F 38.9 1.2 45.9 191.9 21 125499 8/4-18/4 4XSHME30054 139422XP 30.0 575 3 60 1750 F 31.1 1.2 36.7 153.5 21 125499 8/4-18/4 4XSHME40034 130622 40.0 230 3 60 1750 E 106.0 1.2 126.4 486.0 28 138319 2/4-18/4 4XSHME40044 130623 40.0 460 3 60 1750 E 53.0 1.2 63.2 243.0 28 138318 6/4-18/4 4XSHME40054 130624 40.0 575 3 60 1750 E 42.4 1.2 50.6 194.4 28 138317 8/4-18/4 4XSHME50044 130625 50.0 460 3 60 1750 F 67.1 1.2 79.0 339.0 28 138318 6/4-18/4 4XSHME50054 130626 50.0 575 3 60 1750 F 53.7 1.2 63.2 271.2 28 138318 6/4-18/4 4XSHME60044 130627 60.0 460 3 60 1750 E 79.0 1.2 95.5 339.0 28 138319 2/4-18/4 4XSHME60054 130628 60.0 575 3 60 1750 E 63.2 1.2 76.4 271.2 28 138318 6/4-18/4 4XSHME75044 139477XP 75.0 460 3 60 1750 G 108.4 1.15 120.7 578.0 32 138319 2/4-18/4 4XSHME75054 139478XP 75.0 575 3 60 1750 G 86.7 1.15 96.6 462.4 32 138319 2/4-18/4 47.0 1.2 56.8 248.6 4XSHME150N6 136359 15.0 230 3 60 1150 H 44.1 1.2 51.4 21 125498 8/4-18/4 460 22.0 1.2 25.7 124.3 125497 12/4-18/4 4XSHME15056 136360 15.0 575 3 60 1150 H 17.6 1.2 20.6 99.4 21 125497 12/4-18/4 4XSHME20096 136361 20.0 60.3 1.2 71.5 3 60 1150 H 230 57.2 1.2 69.8 354.0 28 138318 6/4-18/4 4XSHME20046 136362 20.0 460 3 60 1150 E 28.6 1.2 34.9 124.3 21 125499 8/4-18/4 4XSHME20056 136363 20.0 575 3 60 1150 E 22.9 1.2 27.9 99.4 21 125497 12/4-18/4 4XSHME25096 136364 25.0 75.2 1.2 90.8 3 60 1150 G 230 70.5 1.2 82.6 354.0 28 138319 2/4-18/4 4XSHME25046 136365 25.0 460 3 60 1150 G 35.4 1.2 41.3 177.0 28 138317 8/4-18/4 4XSHME25056 136366 25.0 575 3 60 1150 G 28.3 1.2 33.0 141.6 28 138317 8/4-18/4 4XSHME30096 136367 30.0 90.8 1.2 114.9 3 60 1150 E 230 82.6 1.2 99.7 354.0 28 138319 2/4-18/4 4XSHME30046 136368 30.0 460 3 60 1150 E 41.3 1.2 49.9 177.0 28 138317 8/4-18/4 4XSHME30056 136369 30.0 575 3 60 1150 E 33.0 1.2 39.9 141.6 28 138317 8/4-18/4 IMPORTANT! Moisture and Temperature sensor leads are integral to power cord. Pump rated for operation at ± 10% voltage at motor. Cord Suffi x: XC - 30 Feet, XF - 50 Feet, XJ - 75 Feet, or XL - 100 Feet. Cord sold separately. CORD P/N CORD SIZE Series 4XSHM
34 3/17 XSHMEA Pump MODEL NO PART NO HP VOLT PH Hz RPM (Nom) NEMA START CODE FULL LOAD 32.9 SERVICE FACTOR SERVICE FACTOR 41.0 LOCKED ROTOR DRIVER FRAME 137.6 4XSHMEA100N6 139988XP* 10.0 230 3 60 1150 F 30.2 1.2 35.8 21 125498 8/4-18/4 460 15.1 17.9 68.8 125497 12/4-18/4 4XSHMEA10056 139989XP* 10.0 575 3 60 1150 F 12.1 1.2 14.3 55.0 21 125497 12/4-18/4 3 60 1150 H 47.0 1.2 56.8 8/4-18/4 248.6 125498 4XSHMEA150N6 139021 15.0 230 3 60 1150 H 44.1 1.2 51.4 21 8/4-18/4 460 3 60 1150 H 22.0 1.2 25.7 124.3 125497 12/4-18/4 4XSHMEA15056 139022 15.0 575 3 60 1150 H 17.6 1.2 20.6 99.4 21 125497 12/4-18/4 4XSHMEA20096 139023 20.0 3 60 1150 H 60.3 1.2 71.5 6/4-18/4 354.0 28 138318 230 3 60 1150 H 57.2 1.2 69.8 6/4-18/4 4XSHMEA20046 139024 20.0 460 3 60 1150 E 28.6 1.2 34.9 124.3 21 125499 8/4-18/4 4XSHMEA20056 139025 20.0 575 3 60 1150 E 22.9 1.2 27.9 99.4 21 125497 12/4-18/4 4XSHMEA25096 139026 25.0 3 60 1150 G 75.2 1.2 90.8 2/4-18/4 354.0 28 138319 230 3 60 1150 G 70.5 1.2 82.6 2/4-18/4 4XSHMEA25046 139027 25.0 460 3 60 1150 G 35.4 1.2 41.3 177.0 28 138317 8/4-18/4 4XSHMEA25056 139028 25.0 575 3 60 1150 G 28.3 1.2 33.0 141.6 28 138317 8/4-18/4 IMPORTANT! Moisture and Temperature sensor leads are integral to power cord. Pump rated for operation at ± 10% voltage at motor. Cord Suffi x: XC - 30 Feet, XF - 50 Feet, XJ - 75 Feet, or XL - 100 Feet. Cord sold separately. * Select impeller diameter when ordering. CORD P/N CORD SIZE Series 4XSHM
Series 4XSHMS Performance Curve 3-7.5HP, 1750RPM, 60Hz TOTAL METERS HEAD FEET 4XSHMS Pump STANDARD IMPELLER SIZES 24 80 Pump HP Impeller Dia. mm (in) 7.5 200 (7.87) 5.0 175 (6.89) 3.0 155 (6.10) 21 70 18 60 200mm 25% Service Factor: 1.20 15 50 35% 12 40 180mm 175mm 45% 9 30 160mm 155mm 45% 6 20 35% 25% 3 10 U.S. GALLONS PER MINUTE LITERS PER SECOND 150 9 15% 7.5 HP 3 HP 5 HP 4SHMS 1750RPM 18 FRAME 300 450 600 750 900 18 27 36 45 54 63 35 9/14
Series 4XSHMC Performance Curve 5-10HP, 1750RPM, 60Hz, 18 Frame TOTAL METERS HEAD FEET 4XSHMC Pump STANDARD IMPELLER SIZES 24 21 80 70 225mm 20% Pump HP Impeller Dia. mm (in) 10.0 225 (8.59) 7.5 205 (8.07) 5.0 185 (7.28) 18 60 205mm 30% 40% Service Factor: 1.20 15 50 200mm 12 40 190mm 9 30 185mm 6 20 40% 30% 3 10 U.S. GALLONS PER MINUTE LITERS PER SECOND 150 9 7.5 HP 5 HP 10 HP 4SHMC 1750RPM 18 FRAME 300 450 600 750 900 18 27 36 45 54 63 36 9/14
Series 4XSHMC Performance Curve 15HP, 1750RPM, 60Hz, 21 Frame TOTAL METERS HEAD FEET 4XSHMC Pump STANDARD IMPELLER SIZES 30 100 Pump HP Impeller Dia. mm (in) 235mm 15 235 (9.25) 24 80 225mm 25% 35% Service Factor: 1.20 215mm 45% 55% 18 60 205mm 65% 195mm 12 40 185mm 6 20 15 HP U.S. GALLONS PER MINUTE 200 400 600 800 1000 4SHMC 1750RPM 21 FRAME LITERS PER SECOND 13 26 39 52 65 37 11/14
Series 4XSHMD Performance Curve 15-40HP, 1750RPM, 60Hz TOTAL METERS HEAD FEET 4XSHMD Pump STANDARD IMPELLER SIZES 48 160 295mm 285mm 25% 35% Pump HP Impeller Dia. mm (in) 40 295 (11.61) 30 275 (10.83) 25 255 (10.04) 20 240 (9.45) 15 225 (8.86) 42 140 275mm 45% Service Factor: 1.20 265mm 55% 36 120 255mm 30 HP 30 100 245mm 235mm 25 HP 63% 36 HP 40 HP 24 80 225mm 20 HP 18 60 15 HP 55% 45% 12 40 35% 6 20 25% 4SHMD 1750RPM U.S. GALLONS PER MINUTE 200 400 600 800 1000 1200 1400 LITERS PER SECOND 13 26 39 52 65 78 91 38 9/14
Series 4XSHMD Performance Curve 7.5-15HP, 1150RPM, 60Hz 4XSHMD Pump 39 9/14
Series 4XSHME Performance Curve 40-75HP, 1750RPM, 60Hz STANDARD IMPELLER SIZES 250 370 mm Pump HP Impeller Dia. mm (in.) 225 350 mm 345 mm 25 35 45 75 60 50 40 30 370 (14.57) 345 (13.58) 330 (12.99) 305 (12.01) 290 (11.42) 200 55 330 mm 60 175 310 mm 305 mm 63 63 150 290 mm 63 60 Head - ft 125 25 35 55 100 45 75 75 hp 60 hp 35 50 25 50 hp 35 25 25 40 hp 30 hp 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 US gpm 40 2/16
Series 4XSHME Performance Curve 15-30HP, 1150RPM, 60Hz 4XSHME Pump 41 12/14
Series 4XSHMEA Performance Curve 10-25HP, 1150RPM, 60Hz 4XSHMEA Pump 42 2/16