Cultivating your security solutions since 1982
Introduction At C & J Supplies we specialise in supplying high security locking solutions for all applications. All of the locking products within this catalogue can be supplied: Keyed individually - one lock with its own keys Keyed alike - two or more locks (these can be of different sizes/types) operated by the same keys Master keyed - a lock opened by its own key and by site master or grand master etc. This catalogue is designed to show you our comprehensive product portfolio in an easy to follow step by step style. The catalogue starts with the padlock product ranges and runs through from padlock protectors, fuel tank locks, padlock enclosures, door locks, trailer hitch locks, security chains to heavy duty anchor points, storage vaults and steel security containers. Bourne Road, Morton, Bourne, Lincs PE10 0RG Tel: 01778 570456 Email: info@cjsupplies.co.uk www.cjsupplies.co.uk
Contents Mul-T-Lock C Series Padlocks... 1 8 Pop... 3 10 Pop/Reg... 4 13 Pop/Reg... 5 16 Pop/Reg... 6 Slide Bolt Lock... 7 Mul-T-Lock NE Series Padlocks... 8 NE8G...10 NE10G...10 NE10L...11 NE10H...11 NE12L...12 NE12H...12 NE14L...13 NE14H...13 NG10SB...14 NE12SB...14 E18H...15 Mul-T-Lock WatchLock...16 Mul-T-Lock CLIQ...17 Additional Components...18 Mul-T-Lock Smartair...19 7X7 Padlocks...20 8L...21 8H...21 10L...22 10H...22 12L...23 Container Security...24 Container Lock Box...25 Guarded Lock Box...26 Squire Container Padlock...27 Gate Lock...28 Hasps Mul-T-Lock HaspLock...29 Mul-T-Lock 10 / 13 / 16 Hasp...30 Squire STH1 / STH2 Hasp...31 CJ Guarded Hasp...32 Squire LB2CS Hasp...32 Era Narrow Locking Bar...33
Vehicle Protection 1 Trailer Ring Lock...34 2 Trailer Ring Lock...34 Hitch Lock...35 Ram Lock...36 Tank Valve Locks...37 MK1...37 MK2...38 MK3...38 MK7...39 MK8...39 Mul-T-Lock Cylinders & Locks Euro Profile Mortice Deadlock...40 Euro Profile Mortice Sashlock...41 Optional Accessories Sashlocks & Deadlocks...42 Rim Cylinder c/w Night Latch...43 Bullet Shutter Lock...44 Key Switches...45 Alarm Switch...45 Camlock...45 Euro Profile Cylinders...46 Optional Accessories...46 UK Dual Oval Cylinders...47 4-Way Lock 235 / 240...48 Multi-Point Locking Bar...49 Squire Combination Padlocks...50 Abus Combination Padlocks...51 Digital Door Locks CJ 2000...52 CJ 3000...52 CJ 6000...52 Key Safes...53 Key Vault / Safe...54 Chains Hardened Steel Chain...55 8mm/10mm/13mm/16mm Security Chain...56 Stainless Steel Chain...56 Ground Anchors Bolt-Down...57 Sunken...58 Concrete In...59 Abus Wall/Floor...59 Squire BPGA...59
Transportable Tool Chests C Series Chests...60 MC Series Chests...60 Purpose Built Chemical Stores...61 Shipping Containers...62 An Example of a Master Key System...63 Additional Information...64 Notes...65
Mul-T-Lock - C Series Padlocks The C Series padlocks are manufactured to the highest standards, the range has been designed to offer the user the most versatile selection of padlocks available today with shackle sizes from 6mm to 16mm. The number of the padlock denotes the shackle diameter in mm i.e. No: 8 padlock has an 8mm diameter shackle. There is a padlock for every application. Additional length shackles are available, to enable easy upgrades of existing padlocks, this eliminates the need to throw away good working padlocks. The 10mm, 13mm and 16mm shackle padlocks available in the C Series range offer the additional benefits of having bolt on protectors for the shackles, allowing easy conversion from an open shackle to a closed shackle padlock. Also available are complete padlock enclosures (hasps) for applications where the highest security is required. These options are designed to resist attacks by bolt cropping and sawing. All of the C Series padlocks have the exceptional feature of double deadlocking. All of the padlocks in the C Series range can be keyed individually; keyed alike or master keyed: Keyed individually - one padlock with its own keys Keyed alike - two or more padlocks (these can be of different sizes/types) operated by the same keys. Master keyed - padlock opened by its own key and by site master or grand master etc. For example: 1
Mul-T-Lock - C Series Padlocks The range of C Series padlocks are fully serviceable; therefore any damaged or worn parts can be replaced with new replacement parts, depending on the product condition. All of the padlocks can be re-pinned, this means that if you have a product(s) which are opened by an existing key, the product can have a new key combination put into it, and new keys supplied, thus eliminating the old keys.* * Applies to individually keyed and keyed alike products, master-keyed product is subject to suite specification; please contact us for further details Product Specification Padlock Body - Hardened steel c/w drainage holes to prevent freezing Shackle - Hardened boron alloy steel double deadlocking Cylinder Mechanism - Brass rotating cylinder plug with nickel silver internal and external telescopic pins and stainless steel springs - Mul-T-Lock s high precision pin cylinder tumbler system - Pick and drill resistant for High Security requirements Additional Feature - Stainless steel dust/weather cover over cylinder plug Keys - Reversible nickel silver key with plastic key head with colour coding facility 2
Mul-T-Lock - C Series Padlocks 8 Pop CEN 2 Shackle retained when opened Key retained when opened *Available non-key retained* A B C D E F mm 47 50 22 8 22 22 Inch 1.85 1.97 0.86 0.31 0.86 0.86 Padlock Options Available Longer shackle C2 Shackle 50mm/1.97 (vertical clearance - E) C3 Shackle 102mm/4.1 (vertical clearance - E) 3
Mul-T-Lock - C Series Padlocks 10 Pop CEN 3 Shackle retained when opened Key retained when opened *Available non-key retained* A B C D E F mm 47 63 22 10 30 33 Inch 1.85 2.5 0.86 0.37 1.2 1.29 Padlock Options Available 10 Regular Fully removable shackle when opened Longer shackle C2 Shackle 63mm/2.5 (vertical clearance - E) C3 Shackle 102mm/4.1 (vertical clearance - E) Shackle Guard Hasp fully encloses the padlock Weld or bolt on Use on hinged or sliding doors/gates 4
Mul-T-Lock - C Series Padlocks 13 Pop CEN 4 Shackle retained when opened Key retained when opened A B C D E F mm 51 73 25 12.7 37 33 Inch 2 2.87 0.98 0.5 1.46 1.29 Padlock Options Available 13 Regular Fully removable shackle when opened Longer shackle C2 Shackle 58mm/2.28 (vertical clearance - E) C3 Shackle 102mm/4.1 (vertical clearance - E) Shackle Guard Hasp fully encloses the padlock Weld or bolt on Use on hinged or sliding doors/gates 5
Mul-T-Lock - C Series Padlocks 16 Pop CEN 5 Shackle retained when opened Key retained when opened A B C D E F mm 53 92 32 16 50 38 Inch 2.1 3.60 1.26 0.62 1.97 1.5 Padlock Options Available 16 Regular Fully removable shackle when opened Longer shackle C2 Shackle 63mm/2.5 (vertical clearance - E) C3 Shackle 102mm/4.1 (vertical clearance - E) Shackle Guard Hasp fully encloses the padlock Weld or bolt on Use on hinged or sliding doors/gates 6
Mul-T-Lock - C Series Padlocks Slide Bolt Lock CEN 4 Key retained when opened A B C D E F G mm 72 73 30 13 18 35 36.5 Inch 2.83 2.87 1.18 0.50 0.71 1.38 1.44 7
Mul-T-Lock - NE Series Padlocks The new range of NE Series padlocks from Mul-T-Lock are manufactured to exacting standards, and are designed to meet the latest draft CEN standards, and high security requirements from Mul-T-Locks global market. The padlocks are available in both open shackle and closed shackle versions and range from 8mm to 18mm in shackle size. The number of the padlock denotes the shackle diameter in mm i.e. No: 8 padlock has an 8mm diameter shackle. Most of the padlocks within the NE Series range feature a unique dust/ingress cover to maximise resistance to all weather types. All NE Series padlocks have the highly regarded feature of double ball bearing locking. All of the padlocks in the NE Series range can be keyed individually; keyed alike or master keyed: Keyed individually - one padlock with its own keys Keyed alike - two or more padlocks (these can be of different sizes/types) operated by the same keys. Master keyed - padlock opened by its own key and by site master or grand master etc. For example: 8
.Mul-T-Lock - NE Series Padlocks The range of NE Series padlocks are fully serviceable; therefore any damaged or worn parts can be replaced with new replacement parts, depending on the product condition. All of the padlocks can be re-pinned if required, this means that if you have a product(s) which are opened by an existing key, the product can have a new key combination put into it, and new keys supplied, this way the old keys are eliminated from accessing the product(s)* * Applies to individually keyed and keyed alike products, master-keyed product is subject to suite specification; please contact us for further details. Product Specification Padlock Body - Case hardened steel c/w drainage holes to prevent freezing Shackle - Hardened boron alloy steel - Double deadlocked with stainless steel locking balls Cylinder Mechanism - Brass rotating cylinder plug with nickel silver internal and external telescopic pins and stainless steel springs. - Mul-T-Lock s unique high precision pin cylinder tumbler system. - Pick and drill resistant for High Security requirements Additional Feature - Stainless steel dust/weather cover over cylinder plug Keys - Reversible nickel silver key with plastic key head with colour coding facility 9
Mul-T-Lock - NE Series Padlocks NE8G CEN 3 Key retained when open A B C D E F mm 87 54 25 8 27 24 Inch 3.42 2.12 1 0.31 1.06 0.94 Mul-T-Lock - NE Series Padlocks NE10G CEN 3 Key retained when open A B C D E F mm 88 54 25 10 26 22 Inch 3.46 2.12 1 0.39 1.02 0.86 10
Mul-T-Lock - NE Series Padlocks NE10L CEN 4 Key retained when open A B C D E F mm 95 54 25 10 25 28 Inch 3.74 2.12 1 0.39 1 1.10 Mul-T-Lock - NE Series Padlocks NE10H CEN 4 Key retained when open A B C D E F mm 95 54 25 10 25 18 Inch 3.74 2.13 1 0.39 1 0.71 11
Mul-T-Lock - NE Series Padlocks NE12L CEN 4 Key retained when open A B C D E F mm 101 66 28 12 25 30 Inch 3.97 2.60 1.10 0.47 1 1.18 Mul-T-Lock - NE Series Padlocks NE12H CEN 5 Key retained when open A B C D E F mm 101 66 28 12 25 21 Inch 4 2.60 1.10 0.47 1 0.83 12
Mul-T-Lock - NE Series Padlocks NE14L CEN 5 Key retained when open A B C D E F mm 105 66 28 14 26 32 Inch 4.13 2.60 1.10 0.55 1.02 1.26 Mul-T-Lock - NE Series Padlocks NE14H CEN 6 Key retained when open A B C D E F mm 105 66 28 14 26 21 Inch 4.13 2.60 1.10 0.55 1.02 0.83 13
Mul-T-Lock - NE Series Padlocks NG10SB CEN 3 Non-key retained when open A B C D E F mm 25 64 54 10 9 26 Inch 1 2.51 2.12 0.39 0.35 1.02 Mul-T-Lock - NE Series Padlocks NE12SB CEN 5 Non-key retained when open A B C D E F mm 28 80 66 12 18 36 Inch 1.10 3.15 2.60 0.47 0.71 1.42 14
Mul-T-Lock - E Series Padlocks E18H CEN 6+ Key retained when open A B C D E F mm 120 83 39 18 27 25 Inch 4.7 3.3 1.5 0.7 1.1 0.9 15
Mul-T-Lock WatchLock The Mul-T-Lock WatchLock is a security padlock which has a GPS locating system and SIM card based communication to provide real time event and location information via email, text message or web based application. Product Benefits Security - High security padlock Monitoring - Know when someone has either opened/closed or moved the padlock Alerts - Receive alerts of events in real time by email or text Reports - View and print reports of padlock activity Location - Always know the exact location of the padlock though GPS technology Key Control - Control provided through Mul-T-Lock patented key systems Product Specification Padlock Outer Case - Hardened steel body Shackle - Hardened boron steel Additional Features - Operation position sensors, Lithium battery Patented key system, GPS tracking, Data SIM card, Cellular communication, Battery level sensor 16
Mul-T-Lock CLIQ Mul-T-Lock CLIQ is a patented electro-mechanical access control system with remote capabilities which combines the security of mechanical security and the flexibility of access control in one key system. CLIQ enables existing locks to be easily upgraded within seconds to provide the benefits of an advanced access control system. Product Benefits Full System Control - You have full control of the system by individually programming each key for the relevant access. Audit Trail - Tracking the use of each key and cylinder, the system creates an audit trail for improved security and control Times Based Access - You can specify specific access windows according to weekly schedules e.g. Monday to Friday 8am 6pm Electronic Key Cancellation - Allowing the immediate electronic cancellation of lost keys through the computer No Costly Wiring - Installing the CLIQ door cylinders is just the same as installing a standard cylinder. In Key Battery - A replaceable long life battery in each key acts as the sole power source for the entire key and cylinder system. 17
Mul-T-Lock CLIQ Additional Components Management Software The PC based software enables administrators to efficiently grant or cancel user access, define time based access and product audit reports. Master C-Key This key is held by the system s overall manager for overall system management. The Master C-Key grants all authorisation to all of the keys within the system. Programming Device This device serves as the physical link between data stored in the software and all of the keys and cylinders used within the system. You need the programming device to programme all of the keys within the system. Mobile Programming Device Using a mobile phone or a computer as a modem, the mobile programming device allows you to programme CLIQ keys remotely on site. CLIQ User Keys The keys are designed for one user only as each key contains a unique electronic ID and is encrypted with tamper proof codes. Each key can be individually predefined with time based access to everywhere or certain areas. 18
Mul-T-Lock Smartair Smartair is a flexible all in one access control solution designed to accommodate the most simplistic or demanding access control requirements, without compromising on door aesthetics. An access control system determines who is allowed to enter or exit, where they are allowed to go and when they are allowed all of this is recorded. Simple is best - Using Smartair is simple, just hold your card to the reader on the door or the wall and because it operates on contactless technology wear and tear is reduced Simple Installation - The Smartair all in one battery powered escu5cheon requires no expensive or complicated cabling. The Smartair unit can be retro fitted to existing door locks with the option to retain existing key systems already in use. Wall readers can be used to upgrade existing access control readers quickly and cleanly, enabling current door automation to be retained. Environmentally Friendly - The low power consumption of the battery powered Smartair unit makes it an ideal solution to help your company achieve its carbon footprint goals. Stay in control - Smartair allows you to control access by time, calendar schedules and user types to enable full management control, with the added benefit of a full audit trail. Card Maintenance - Even if you have an existing card system, it is possible to implement Smartair into your site and use your existing cards. Adaptable - Smartair solutions are available in a variety of options to suit individual applications 19
7X7 Padlocks (non-patented) The 7X7 security range comprises of a variety of high performance locking products, designed for the majority of applications in the ever-changing market place of today. The body of the 7X7 padlock is manufactured from brass and the shackle is hardened boron alloy steel. The unique and very versatile 7 pin locking mechanism offers the flexibility to create convenient locking solutions simple keyed alike lock suites or, where necessary, more sophisticated master keyed systems. From a simple rim cylinder to a heavy-duty padlock, this fully serviceable range of security products is available to work independently on the 7X7 key or can be easily integrated into the Mul-T-Lock system working on a Mul-T-Lock key. 7X7 is strong by name and secure by nature. Product Specification Padlock Body - Brass Shackle - Hardened boron alloy steel Cylinder body, plug & pins - Brass or nickel silver Cylinder Mechanism - 7-chamber pin tumbler system Cylinder Options - Keyed different, keyed alike, master keyed Additional Features - High Corrosion resistance - Hammering resistance - Available on 7X7 or Mul-T-Lock key Keys - Reversible nickel silver key with plastic key head with colour coding facility 20
7X7 Padlocks 8L CEN 3 Key retained when open A B C D E F mm 51 47 21 8 26.5 25 Inch 2.07 1.85 0.83 0.31 1.04 0.98 7X7 Padlocks 8H CEN 3 Key retained when open A B C D E F mm 74 47 21 8 22.5 20 Inch 2.91 1.85 0.83 0.31 0.89 0.79 21
7X7 Padlocks 10L CEN 3 Key retained when open A B C D E F mm 54 55 22 10 27 29 Inch 2.13 2.17 0.87 0.39 1.06 1.41 7X7 Padlocks 10H CEN 3 Key retained when open A B C D E F mm 77 55 22 10 23 20 Inch 3.03 2.17 0.87 0.39 0.91 0.79 22
7X7 Padlocks 12L CEN 3 Key retained when open A B C D E F mm 55 60 26 12 27 30 Inch 2.17 2.36 1.02 0.47 1.06 1.18 23
Container Security The Container Lock Box and the Guarded Lock Box are specifically designed for use on shipping containers, hinged doors or gates. When locked they both allow for generous movement of the two halves. The padlocks used are from the Mul-T-Lock range, which are completely enclosed in the lock box. When the lock box is opened the padlock bodies remain inside. Should the padlocks require any maintenance they can be easily removed. The lock box is pre-assembled for accurate spacing of the two halves by welding and can be fitted in minutes. They are both available in either left or right hand applications. Full fitting kits and comprehensive fitting instructions are provided. Product Specifications Lock Box Outer Case - 5mm and 6mm steel using modern engineering technology to ensure accurate product specifications Padlock Outer Case - Hardened steel Inner Body - Black plated solid brass Shackle - Hardened manganese alloy steel Key Mechanism - Brass rotating cylinder plug with nickel silver and stainless steel pins and springs. Additional Feature - Stainless steel dust/weather cover over cylinder plug Keys - Nickel silver key with nylon key bow with colour coding facility 24
Container Security Container Lock Box Container Lock Box Options Available Can be phosphate washed if required A C2 shackle (50mm/1.96 ) can be used to allow more vertical tolerance Left or right hand fitting Container Lock Box Optional Accessories 3mm & 5mm packing plates available for uneven fitting faces Magnetised ball end drivers available for easy fitting of retention cap screws Container Lock Box Contents 1 x Hasp 1 x Mul-T-Lock 16 regular padlock c/w 2 keys 1 x Spacer plate c/w clips pre-assembled 2 x Cap screws 1 x T plate 1 x Zip tie 1 x Shackle chain c/w pop rivet & washer 1 x Neoprene rubber flap 25
Container Security Guarded Lock Box Product Specification Padlock is fully enclosed and retained Patented Mul-T-Lock key sections Uses Mul-T-Lock 13mm Slide bolt lock Can be master keyed and keyed alike Padlock is retained in the housing when opened Padlock can be removed easily for maintenance When locked the lock block allows for generous movement of both halves Fully welded 5mm and 6mm steel Fitted in minutes jig available on request Available as weld on or adjustable bolt on Available in stainless steel Guarded Lock Box Contents 1 x Hasp 1 x Mul-T-Lock C Series 13mm padlock 1 x 40mm anti jemmy wrapper 2 x Allen retaining screws 1 x Weld on locking eye 26
Container Security Squire Squire together with C&J Supplies has released the above padlock specifically for shipping containers, designed to fit within the front mounted lockbox. The Squire container padlock can be used across a selection of key platforms from both Squire and Mul-T-Lock. Product Specification Padlock Body - Hardened steel lock body Shackle - Hardened boron alloy steel shackle Cen Rating - 4 Platforms - Squire - Mul-T-Lock 27
Gate Lock Product Specification Uses a Mul-T-Lock SBE 11 patented 11mm slide bolt lock Or Uses a Mul-T-Lock C13 padlock The padlock is completely enclosed in a steel plate housing The padlock can be removed easily for maintenance It can be bolted or welded Available left or right handed Tapered lip on hasp keeper for ease of closing the gate Do away with locks and chains Easy to use you simply insert the key and open Can be keyed alike or master keyed to other padlocks Can be fitted in minutes!!! Gate Lock Contents 1 x Mul-T-Lock SBE11 or C13 padlock 1 x Keeper plate 2 x Gate lock sleeve c/w built in captured screws 6 x Cap screw bolts (if required on bolt on version ) 28
Hasps The following hasps can be used to secure doors and gates etc. The padlock shackle is protected by the hasp thereby making attack more difficult and in some cases impossible. Hasps Mul-T-Lock - HaspLock Product Specification Body - Hardened steel casing - Laser cut plates c/w countersunk holes Locking Mechanism - Mul-T-Lock unique high precision pin tumbler system. Pick and drill resistant for high security needs Bolt - 13mm, hardened, non-removable Features / Options - Key retaining or non key retaining - Drill protection - Dust cover - Can be welded or bolted on - Available horizontal or vertical, to suit the bracing of timber doors 29
Hasps Mul-T-Lock Hasp No: A B C mm 10 80 95 40 Inch 10 3.15 3.74 1.57 mm 13 90 109 40 Inch 13 3.54 4.29 1.57 mm 16 110 116 48 Inch 16 4.33 4.56 1.89 Product Specification Body - Hardened malleable high quality cast steel Locking Mechanism - Mul-T-Lock unique high precision pin tumbler system. Pick and drill resistant for high security needs Features They provide secure housing for Mul-T-Lock removable shackle type padlocks The hasps can be welded or bolted to steel, wood or aluminium structures There are three sizes available to suit the Mul-T-Lock padlocks with removable shackle No: 10, 13 and 16 30
Hasps Squire High Security CEN Rated Padbars Built to stringent BS EN 12320 European Security Standards with CEN ratings 4-6 these padbars provide maximum security against attack. Squire STH1 This ultra-strong padbar is made of a special hardened casting with a specially toughened hasp attachment plate and staple. The rotating staple is ideal for a 12.7mm shackle and can be used with a closed shackle padlock. The STH1 can be fitted flush or at a right angle. Product Specification Width 86mm Hasp length 184mm Staple diameter 13mm Body thickness 32mm Material SG cast iron Hardened Yes CEN Rating 6 Squire STH2 This heavy duty padbar has a robust casting for the hasp attachment plate and staple. The rotating staple is designed to use with a 12.7mm closed shackle padlock. The STH1 can be fitted flush or at a right angle. Product Specification Width 86mm Hasp length 184mm Staple diameter 13mm Body thickness 32mm Material SG cast iron Hardened No CEN Rating 4 31
Hasps C&J Guarded Hasp Product Specification The CJ Guarded Hasp is shown here with a Mul-T-Lock E14L Padlock (not provided) The CJ Guarded Hasp provides closed shackle protection to an open shackle padlock or slide bolt It is constructed from 5mm thick hardened steel It is available for left hand or right hand opening, hinged or sliding doors It comes complete with fixing bolts, washers and re-enforcement plates (for the back of the door etc) The CJ Guarded Hasp will allow for slight movement of the doors etc when locked All fixings included Hasps Squire LB2CS Width Length mm 30 56 Inch 1.19 2.2 Product Specification Squire LB2CS is shown here with a Mul-T-Lock SBE11 Padlock (not provided) Squire LB2CS provides closed shackle protection to an open shackle padlock or slide bolt It is constructed from 6mm thick hardened steel It is available for left hand or right hand opening, hinged or sliding doors It comes complete with fixing bolts 32
Hasps ERA - Narrow Locking Bar Product Specification Body - Heavy malleable iron castings - Hardened forged-steel hasp conceals the staple to prevent hack-sawing and forced wrenching. 33
Vehicle Protection 1 Trailer Ring Lock Product Specification Designed specifically to fit into the towing eye of a trailer. Stainless Steel / MTL Hasp Comes complete with a Mul-T-Lock No: 10 Padlock Vehicle Protection 2 Trailer Ring Lock Product Specification Designed specifically by C&J Supplies to fit into the towing eye of a trailer. Fully welded 8mm steel housing Ring hitch fully enclosed Fully enclosed CEN 4 rated slide bolt padlock retained Available on fully patented Mul-T-Lock & Squire key platforms 34
Vehicle Protection Hitchlock Product Specification This hitchlock completely encloses the hitch It is constructed from hardened steel It has a hardened steel locking pin It is fitted in seconds Easy to use Various types for individual brands of hitch For example: Bradley Doublelock Range Avonride 1991 onwards Bradley Autohead GA3500 Bradley Autohead GA2750 35
Vehicle Protection Ram Lock Product Specification Used for securing the steering ram in full lock Stainless Steel For use of tractors and plant equipment Available in a variety of sizes Comes complete with a Mul-T-Lock 13mm C Series slide bolt - see page 7 for details * Please quote ram diameter and length when ordering * 36
Tank Valve Locks The following valve locks are designed to protect and secure all types of tanks containing fuel, fertilisers, effluent and chemicals. The cover totally encloses the tank tap and is secured by a high security padlock, thus ensuring defence against theft, vandalism and pollution. There are a variety of sizes available ensuring that all tanks can be secured. Product Specification Cover Body - 3mm steel case CEN 5 Padlock - Hardened body designed to resist 9 tonnes bolt cropping Shackle - 13mm boron alloy steel shackle Key Mechanism - Brass rotating cylinder plug with nickel silver and stainless steel pins and springs Keys - Nickel silver key with nylon key bow with colour coding Facility Tank Valve Locks MK1 This tank lock cover will fit and secure an upright 1 gate valve tap 37
Tank Valve Locks MK2 This tank lock cover will fit and secure a 1 angle gate valve tap. Tank Valve Locks MK3 This tank lock cover will fit and secure a 2 standard gate valve tap. 38
Tank Valve Locks MK7 This tank lock cover will fit and secure a 1 lever tap. Tank Valve Locks MK8 This tank lock cover will fit and secure an old type 1 ½ / 1.75 tap with up to 3.75 diameter wheel 7.25 tall. NB: Replacement ML2L locks are available on either Squire or Mul-T-Lock key. 39
Cylinders & Locks Euro Profile Mortice Deadlock Product Specification Material - High quality steel lock case and mechanism - Heavy-duty 20mm throw steel bolt Application - Mortised into the edge of metal or wood doors, to provide single point dead locking Operation - 360 key rotation to fully extend the bolt Product Options Optional Accessories Please refer to page 42 - Shiny brass or nickel chrome finish - Available in 2 ½ or 3 - Will accept bolt thru escutcheons 40
Cylinders & Locks Euro Profile Mortice Sashlock Product Specification Material - High quality steel lock case and mechanism - Heavy duty 20mm throw steel bolt Application - Mortised into the edge of metal or wood doors, to provide single point dead locking Operation - 360 key rotation to fully extend the bolt Product Options - Shiny brass or nickel chrome finish - Available in 2 ½ or 3 - Will accept bolt thru escutcheons and handles Optional Accessories Please refer to the next page. 41
Cylinders & Locks Optional Accessories Please see below for a breakdown of optional accessories for sashlocks and deadlocks. CJ Bolt through escutcheons Available in satin or brass finish CJ Fully covered bolt through escutcheons Fully covered euro cylinder complete with anti-drill key entry disc Brass euro lever handles *Various different styles available* Stainless steel 22mm round bar handles Also available in brass. Complete with bolt through fixings Security bolt through handles the euro cylinder is completely covered. More handles are available upon request. Available in silver, white, gold and matt black *Please specify fixing centres when ordering* 42
Cylinders & Locks Rim Cylinder c/w Night Latch Mul-T-Lock Product Specification Material - Zinc alloy casting - Solid brass bolt Product Options - Available in white, silver and brass finishes - 40mm & 60mm backsets available - Bolt can be deadlocked by reverse turning the key - Deadbolt - Non - Deadlocking Optional Accessories Cylinder pull available in brass or satin finish 43
Cylinders & Locks Bullet Shutter Lock Mul-T-Lock Product Specification Material - Brass body and plug - Steel locking pin - Pins: Nickel silver & stainless steel Application - For shutter applications, replacing existing locks in vertical roller shutters Operation - 90 rotation by operating key and pushing the lock into an existing housing or shutter channel Optional Accessories Weld on bullet lock housings 44
Cylinders & Locks Key Switch Mul-T-Lock Finish - Nickel matt Size - 22mm Cylinders & Locks Alarm Switch Mul-T-Lock Finish - Nickel matt Size - 37mm diameter Cylinders & Locks Camlock Mul-T-Lock Finish - Nickel matt Sizes - 19mm & 22mm Uses - Cupboards, mail boxes, lockers etc 45
Cylinders & Locks Euro Profile Cylinders Mul-T-Lock Available in brass or satin chrome Single cylinders available Sizes Available From: - 42.5mm 120mm (equal or off set lengths) Product Specification Material - High quality solid brass plug and body - High quality steel cam Application - Euro profile mortise lock cases Operation - 360 rotation by key or thumb turn Product Options - Emergency cylinder with both sides permanently operational - Single or double cylinder - Thumb turn option / Anti- ligature - Electroplated brass or satin chrome finish Optional Accessories Heavy Duty surface mounted double throw deadlock 2 sizes available 46
Cylinders & Locks UK Dual Oval Cylinders Mul-T-Lock Available in brass or satin chrome Single cylinders available Sizes Available A 66mm 76mm 86mm B 33 38 43 C 33 38 43 Product Specification Material - High quality solid brass plug and body - High quality steel cam Application - Oval profile mortise lock cases Operation - 360 rotation by key or thumbturn Product Options - A variety of cams are available - Emergency cylinder with both sides independently operational - Single or double cylinder - Thumb turn option - Electroplated brass or satin chrome finish 47
Cylinders & Locks 4-Way Lock 235/240 Product Specification Material - High quality steel lock case and mechanism - Hardened steel cylinder protector - Equipped with Mul-T-Lock cylinder Application - Morticed into the edge of metal or wood doors to provide multi-point locking and latch functions Operation - 4-way locking action operating 6 bolts - 360 Key rotation of cylinder for dead bolt action and additional travel for latch action. - The latch is reversible for LH or RH applications Approval - Supervision Mark by ISI General Specification - Spec. No. 196 Burglary - UL classified Burglary Cylinder Mechanism - High precision, advanced 10 telescopic pin tumbler system Products Options - Patented ribbed plug for increased level of security - Patented combined driver pins - Pick and drill resistant for high security needs - Available as a deadlock Model 240 - Hardware and escutcheons available in white, brown, shiny brass or nickel chrome - Fixed or moving handle on the outside (inside always moving) 48
Cylinders & Locks Multi-Point Locking Bar Mul-T-Lock High security without the cost of changing your doors or windows Product Specification Easy to fit Easy to use Can be keyed alike to existing locks 2 point locking mechanism 14mm diameter steel locking bolt Available in various lengths up to 3m Finished in white Can be used horizontally or vertically Handle option 49
Combination Padlocks Squire All the following padlocks can be re-coded. Model: Shackle Diameter Body width SS50/Combi 10mm 55mm SS50C/Combi 10mm 55mm Model: Shackle Diameter Body width CP60 10mm 60mm CP60/2.5 10mm 60mm CP60CS 10mm 60mm Model: Shackle Diameter Body width CP50 8mm 50mm CP50/1.5 8mm 50mm CP50/2.5 8mm 50mm CP50CS 8mm 50mm Model: Shackle Diameter Body width CP40 6mm 40mm CP40/2.5 6mm 40mm CP40CS 6mm 40mm Model: Shackle Diameter Body width Squire CombiBolt N/A 50mm 50
Combination Padlocks Abus Model: Type: Shackle Diameter 190/60 Open Shackle 11mm 190/60CS Closed Shackle 11mm Model: Type: Shackle Diameter 158/40 Open Shackle 6.5mm 158/50 Open Shackle 8mm 158/65 Open Shackle 10 Model: Type: Shackle Diameter 1801B Open Shackle 8mm 1801B/50HB Open Shackle 2.5 length 8mm Model: Type: Shackle Diameter Abus 155/20 Open Shackle 3mm Abus 155/30 Open Shackle 5mm Abus 155/40 Open Shackle 6.5mm 51
Digital Door Lock CJ 2000 Fully mechanical combination lock. Easy to install and all required fixings included. 60mm Latch (50 & 70mm available) Euro for euro cylinder locks Adjustable handle for left or right Anti-vandal clutch mechanism Set your own code Key override available Digital Door Lock CJ 3000 Fully mechanical combination gate lock. Easy to install and all required fixings included. To suit box profiles up to 60mm Easily reversible Marine grade quality Set your own code Adjustable spring loaded latch 65-80mm 20mm Bolt withdrawal Key override available Ideal for steel gates / doors Digital Door Lock CJ 6000 Fully mechanical combination gate / door lock. Easy to install and all required fixings included. Single column 6 button chamber Free acting handle Unique on door code changing no need to remove Set your own code 70 Handle rotation 40mm body width, ideal for narrow stile sections Extension plate making it suitable for use with 70, 72 & 90mm centres Perfect upgrade from a standard set of lever handles fitted using existing sashlock case and fixing centres. 52
Key Safes Model: Body Height Body Width Body Depth Abus 767 115mm 80mm 43mm Strong sturdy construction Weather resistant cover Easy to fit All required fixings included Set your own code Push Button Model: Body Height Body Width Body Depth Abus 787 115mm 80mm 43mm Strong sturdy construction Weather resistant Easy to fit All required fixings included Set your own code Model: Body Height Body Width Body Depth Squire KeyKeep1 120mm 85mm 35mm Strong sturdy construction Weather resistant cover Easy to fit All required fixings included Set your own code Model: Body Height Body Width Body Depth Comsafe KeyKeeper 115mm 55mm 65mm Strong sturdy construction Weather resistant Easy to fit All required fixings included Set your own code Push Button 53
Key Vault / Safe Designed to meet the requirements of insurance companies in the control, tracking and security of keys. This range of key vaults/safes offers twice as much security and strength provided by standard key cabinets. Constructed from 2.5mm fabricated steel with a 3mm flush closing door, which includes removable hinge pins for easy upgrading. The cabinets are supplied, as standard with a ½ euro cylinder that can be integrated into a Mul-T-Lock system. The key vault/safe has adjustable hook bars, a removable control index, sign-out tables (to record a paper trail of key usage) It also available in a deeper model for the storage of bunches of keys. Options Standard key vault: Deep key vault: from 30 600 keys from 48 bunches 200 bunches 54
Chains Hardened Steel Chain We can provide chain ranging from 10mm to 14mm link diameter in varying lengths. These chains have an extra-long link on one end, this facilitates easy fitment for use with closed shackle padlocks. Model Number Length Link Diameter Squire G3 915mm 10mm Squire G4 1200mm 10mm Squire TC3 915mm 14mm Squire TC4 1200mm 14mm IFAM 1200mm 14mm IFAM 1600mm 14mm Product Specification Construction - Hardened alloy steel Product Options - Available in various lengths see chart above 55
Chains 8mm - 16mm Close link security chain to resist sawing and bolt cropping. Product Specification Construction - Case hardened boron alloy Product Options - Available in 8mm / 10mm / 13mm / 16mm diameter link - Various lengths available - Chain sleeves available Chains 16mm Stainless Steel 16mm close link chain that resists oxy-acetelene attack and bolt croppers Product Specification Construction - Marine grade stainless steel Product Options - Various lengths available - Chain sleeves available 56
Ground Anchors Bolt Down Product Specification Once fitted, this product is permanent ideal locations would be on sound concrete or masonry. Paving flags are not recommended. Made from fully welded / machined steel Full fitting instructions are included with each ground anchor Designed to take up to a 16mm diameter chain and equivalent padlock Will take up to a 16mm diameter chain Ground Anchor Contents 1 x Ground anchor 5 x Concealed self-tapping concrete bolts 5 x Steel plugs and security ball bearings 1 x Hex socket drive 57
Ground Anchors Sunken Once fitted, this product is permanent Ideally to be in concrete Flush fitting Paving flags are not recommended. With flush fitting lid Designed to take up to a 16mm diameter chain and equivalent padlock Product Specification Made from 5mm and 6mm steel 35mm diameter round anchor bar Will take up to a 16mm diameter chain Height: 155mm Width: 160mm Back to Front: 210mm 58
Ground Anchors Heavy Duty - Concrete In To be concreted in Will accept 13mm boron chain Ground Anchors Abus Wall / Floor 16mm Hardened steel alloy shackle Fix to wall or floor / inside or outside Heavy duty construction, designed to drive over All required fixings included Ground Anchor Squire BPGA Sold Secure Gold Fully case hardened Fits chains up to 19mm Blue powder coat finish All required fixings included 59
Transportable Tool Chests C Series Sizes Available: Model Length Depth Height C6 6 0 2 3 4 1 C5 5 0 2 3 4 1 C4 4 2 2 3 4 1 C3 3 2 2 3 4 1 Transportable Tool Chests MC Series Sizes Available: Model Length Depth Height MC6 6 0 2 3 2 0 MC5 5 0 2 3 2 0 MC4 4 2 2 3 2 0 MC3 3 2 2 3 2 0 The transportable tool chest provides a safe and secure storage unit for tools on-site The lid opens on a full length hinge and is supported on gas struts for ease of handling The chest can be transported either by a forklift (using the in-built support skids underneath) or by a crane (using the heavy duty lifting eyes found on either side) Product Specification Construction - Fully welded 2.5mm rigidly reinforced steel - Welded angles on the lid provide additional anti-jemmy protection Locking Mechanism - Two keyed alike high security locks Mul-T-Lock available if necessary Product Options - Five different sizes - Choice of colours These tool chests meet the requirements of B.A.S.I.S and the H.S.E If used to hold chemicals the appropriate warning stickers would be fitted. 60
Purpose Built Chemical Stores Each all steel store is custom built to suit your requirements any size available up to 45 x 12 x 8 The internal colour of the store is white and there is a choice of several basic colours available for the exterior This all steel static unit provides a totally secure store With the addition of a fully welded bund this store can be used as a chemical store which then meets the approval of B.A.S.I.S. and the H.S.E appropriate warning stickers would then be fitted Product Specification Roof - Constructed from 1.6mm steel, 50mm x 30mm x 3m roof bows Sides - 1.6mm corrugated steel 2.5mm corner posts and support channels Floor - 4mm steel, fully welded Doors - Double or single (4 each) 2.5mm thick (positioned to suit) - Reinforced 100mm x 50mm x 3mm P.S.C. welded frame - Full anti-jemmy protection around the doors, internally and externally - Doors secured by full length internal heavy duty locking rods, high security Mul-T-Lock door lock and an external door flap Product Options A wide range of sizes Choice of single or double doors Extra doors if necessary Solar Panels Internally welded steel partition Wide range of extras available: Shelving Lights 13amp double/single sockets Windows Heaters Washroom facilities 61
All Steel Shipping Containers New and second hand available Various sizes available including 9 6 High Available for sale or hire Delivered with a H.I.A.B lorry Secure locking available Please call for a competitive price. 62
Example of a Master Key System Grand Master Opens Everything Opens A & B Opens G, H & I A B G I H Opens C, D, E & F D E F C Gate Key Only 63
Additional Information This brochure contains the most popular ranges of padlocks, locks and locking solutions. There are however numerous other locks and locking solutions available for example: Cam locks Slam locks Threaded cylinders Cupboard locks Chains of varying lengths Additional valve locks Safes / data safes Key cupboards We would be willing to discuss any locking problems or systems, and, if necessary, a site visit can be arranged. We will always keep a running record of all Mul-T-Lock locks and Mul-T-Lock keys supplied. All Mul-T-Lock locks and keys will be marked for ease of identification / location. All Mul-T-Lock keys are engraved with our company name and telephone number, but will also include a unique ID number relating to your company in the event of lost keys being returned to our office, which we would then forward on to yourselves. Keys for different areas can have coloured pips for identification. Bourne Road, Morton, Bourne, Lincs PE10 0RG Tel: 01778 570456 Email: info@cjsupplies.co.uk www.cjsupplies.co.uk 64
Notes Bourne Road, Morton, Bourne, Lincs PE10 0RG Tel: 01778 570456 Email: info@cjsupplies.co.uk www.cjsupplies.co.uk 65
Notes Bourne Road, Morton, Bourne, Lincs PE10 0RG Tel: 01778 570456 Email: info@cjsupplies.co.uk www.cjsupplies.co.uk 66