Standalone three-phase UPS system PowerWave 33 S3 60 120 kw Efficient and reliable power protection for IT equipment in small- and medium-sized organizations
Innovative technology delivering unmatched power performance ABB has always set global standards in uninterruptible power supply (UPS) solutions. The latest generation of PowerWave 33 Series 3 continues ABB s tradition of applying stateof-the-art technology to UPS products, and delivering the best combination of energy efficiency and overall power performance in the industry. Offering maximum power protection, the PowerWave 33 Series 3 (S3) has a small footprint and uses less energy than comparable products thus delivering significant cost savings for the user. The PowerWave 33 S3 s exceptional design meets all the modern requirements involved in building and operating energy-efficient and environmentally friendly centers. The PowerWave 33 S3 employs transformer-less double conversion UPS topology and is available in ratings from 60 to 120 kw. APPLICATIONS Small - to medium-sized data centers Office and building power protection Process automation Other critical processes Rating 60 to 120 kw Highlights: Reliable double conversion UPS ensures the critical load is never affected by utility disturbances. High, 96 percent efficiency in double conversion mode reduces running costs without compromising reliability. Space-saving mechanical design has a footprint of only 1/3 m² and front-to-top airflow allows installation against the wall. Front service access reduces time needed for maintenance. Up to 10 UPSs in parallel can give additional capacity and/or redundancy. Integrated system this UPS has a maintenance bypass switch, single or dual input feed configurations as well as other features, integrated into the system. Highly flexible battery configuration supports usage of 42-48 battery blocks in a string. This allows optimizing the battery and reduces the need to oversize. PowerWave 33 S3 60-120 kw 02 PowerWave 33 S3 60 120 kw STANDALONE THREE-PHASE UPS SYSTEM
The best combination of energy efficiency, reliability and low cost of ownership Perfectly reliable The PowerWave 33 S3 has true online double conversion technology that continuously conditions incoming power to eliminate spikes, swells, sags, noise and harmonics, ensuring that the critical load is at no point affected by any utility disturbances. Highly efficient Top-of-market 96 percent efficiency in double conversion mode reduces running costs without compromising reliability. This UPS has a very flat efficiency curve so high efficiency is reached at low load levels. % 96efficiency in secure double conversion mode Well optimized for modern loads Battery runtime can be optimized to match well the exact needs. The UPS supports usage of 42-48 batteries in a single string, which minimizes the total cost of installation as optimal configuration can be used and so there is no need to oversize the battery. 1.0 rated output power factor means that each and every Watt of power is REAL power that is available for use. This helps with optimizing the complete electrical infrastructure in terms of switchgears and cabling, both upstream and downstream from the UPS. Mains-friendly with low input harmonics and advanced PFC This UPS s front-end rectifier actively controls the input power factor and has extremely low content of input current harmonics. This means that no additional filters are required upstream and the UPS does not cause any disturbance to other equipment connected to the same input source. Unity input power factor and low harmonic distortion allows upstream cabling, switchgear and generator sizes to be optimized, and reduces heating of input transformers.
Technical specification GENERAL DATA 60 kw 80 kw 100 kw 120 kw Output power max. 60 kw 80 kw 100 kw 120 kw Output power factor 1.0 Topology True online double conversion Parallel configuration Up to 10 units UPS type Standalone Cable entry Front access INPUT Nominal input voltage 3 380 / 220 VAC + N, 3 400 / 230 VAC + N, 3 415 / 240 VAC + N Voltage tolerance For loads < 100 % (-10 %, +15 %), < 80 % (-20 %, +15 %), < 60 % (-30 %, +15 %) (Ref. to 3 400 / 230 V) Input distortion THDi 4% at 100 % Frequency 35-70 Hz Power factor 0.99 at 100 % load OUTPUT Rated output voltage 3 380 / 220 VAC + N, 3 400 / 230 VAC + N, 3 415 / 240 VAC + N Voltage distortion < 2 % Frequency 50 or 60 Hz Overload capability 0.5 min. @ 150 % load; 5 min. @ 125 % load; 20 min. @ 110 % load Unbalanced load 100 % possible EFFICIENCY Double conversion Up to 96 % In eco-mode configuration 99 % ENVIRONMENT Storage temperature -25-70 C Operating temperature 0-40 C Altitude configuration 1000 m without de-rating BATTERY Battery type Sealed, lead-acid, maintenance-free or NiCd COMMUNICATIONS User interface Optional Customer inputs Remote shutdown, genset interface Customer outputs Potential-free contacts (optional), USB (optional) STANDARDS Safety IEC / EN 62040-1 Electromagnetic IEC / EN 62040-2 compatibility (EMC) Performance IEC / EN 62040-3 Product certification CE Protection rating IP 20 Manufacturing ISO 9001:2008, ISO 14001:2004 WEIGHT, DIMENSIONS Weight (without batteries) 198 kg 206 kg 228 kg 230 kg Dimensions W H D (mm) 615 1954 480 or 615 1978 480 (with feet) STANDALONE THREE-PHASE UPS SYSTEM PowerWave 33 S3 60 120 kw 04
Easily scalable for capacity and redundancy Up to 10 units can be configured in parallel to provide over a megawatt of UPS power or redundant backup. This scalability means the UPS system capacity can be sized to match the load requirements, with the possibility to add incremental capacity later, when power needs change. The resulting savings in power usage over the service life of the UPS are substantial. Critical load As your power requirements grow, the UPS system grows with them thanks to its flexible scalability - even in the most confined spaces. Up to 10 UPSs in parallel can give additional capacity and/or redundancy Space-saving and simple to service Space-saving mechanical design results in a footprint of only 0.30 m² and front-to-top airflow allows installation directly against a wall. For service, only frontal access is needed, which means that the total footprint with maintenance clearances is minimized and overall time required for service and maintenance is shortened. Compact size footprint of only 0.30 m 2 05 PowerWave 33 S3 60 120 kw STANDALONE THREE-PHASE UPS SYSTEM
Contact us www.abb.com/ups ups.sales@ch.abb.com Copyright ABB. All rights reserved. Specifications subject to change without notice. 4NWP100605R0001 Printed in Switzerland, 2014