LENCO WELDING ACCESSORIES LTD. SECTION 500 WATER COOLERS PAGE 1
SECTION 500 LENCO WELDING ACCESSORIES LTD. Note: Information on R2200V and R4000 available from our order desk 1-800-265-5678 DEFENSE ANTI-FREEZE AND PUMP LUBRICANT Provides year round protection for water coolers and other closed loop water recirculators. Part No. DF929 Dilutable DF927 Ready to use To Fill Unit: Fill reservoir with distilled water and Dynaflux Defense Anti-Freeze & Pump Lubricant for freeze protection and extended pump life. NOTE: Automotive Anti-Freeze compounds are not recommended for use in this unit as it will severely shorten pump life and void manufacturers warranty. Installation: Place unit so as not to inhibit airflow to radiator. For proper hook-up the torch out line is to be connected to the inert arc adaptor labelled water in. The torch in line is to be connected to the inert arc adaptor labelled. 15 Month Limited Warranty on All Coolers NOTE: Use of automotive anti-freeze compounds voids warranty and shortens pump life. WATER COOLERS PAGE 2
LENCO WELDING ACCESSORIES LTD. SECTION 500 TIGER Tig Torch Cooling System Factory set at 50 psi 2 Gallon reservoir 3.2 / 1.5 amp: 60 Hz 10,000 BTU Dimensions: 12 L x 14 W x 9 H 1/4 Female Pipe Fitting (water in/out) with 5/8 LH Std. Inert Gas Fitting Visible water level through tank Net weight: 30 lbs / 13.6 kg The TIG-er Cooling System is designed for: up to 250 amps up to 250 amps Plastic Water Tank eliminates coolant contamination due to electrolysis or chemical reactions. All units are plumbed with copper tubing and reinforced hose. New extended life pump features a direct drive power system reducing maintenance and vibration. No external plumbing is required because of closed loop water system. Self priming, easy change pump. Strong rigid construction designed to support power unit. Compact design. Reservoir Cap (G1001) Radiator (C2055) Fan (F3075) Reservoir (S0450) Motor (M2500) Rotary Vane Pump (P1200) Part No. TIGER TIGER-230 Description Tig Cooling System 115 v Tig Cooling System 230 v Caution: Do Not Over Tighten Fittings On Tank. Excessive Torque May Strip Fittings In Tank. WATER COOLERS PAGE 3
SECTION 500 LENCO WELDING ACCESSORIES LTD. ProCool II V/G COOLING SYSTEM Factory set at 50 psi adjustable to 80 psi 3 Gallon reservoir 1/4 Female Pipe Fitting (water in/out) with 5/8 LH Std. Inert Gas Fitting 5.6 / 2.8 amp: 60 Hz 12,000 BTU Dimensions: 18 L x 14 W x 9 H Visible water level through tank Net weight: 37 lbs / 17 kg PCIIG: Rotary GEAR Pump 1.8 gpm at 50 psi Rebuildable pump PCIIV: Rotary VANE Pump 1.7 pgm at 50 psi The ProCool II V/G Cooling System is designed for: up to 500 amps up to 500 amps Resistance Welders 60 KVA 12,000 BTU/HR @ 75 Degrees Differential Plastic Water Tank eliminates coolant contamination due to electrolysis or chemical reactions. All units are plumbed with copper tubing and reinforced hose. New extended life pump features a direct drive power system reducing maintenance and vibration. No external plumbing is required because of closed loop water system. Strong rigid construction designed to support power unit. Self priming and easy change pump. Compact design. Pump - GEAR (P1110) Repair Kit (P3001) Pump - VANE (P1100) Reservoir (S0402) Reservoir Cap (G1001) Motor (M3000) Fan (F3075) Part No. Description PCIIG Gear Pump 115 v PCIIV Vane Pump 115 v PCIIG-230 Gear Pump 230 v PCIIV-230 Vane Pump 230 v WATER COOLERS PAGE 4 Radiator (C1050)
LENCO WELDING ACCESSORIES LTD. SECTION 500 VH1000 V/G COOLING SYSTEM Operates in both vertical and horizontal position Factory set at 50 psi adjustable to 100 psi 2 Gallon reservoir 115 or 230vac / 1 phase 50/60hz 5.6 / 2.8 amp: 60 Hz 12,000 BTU Dimensions: 9 L x 9 W x 26 H 1/4 Female Pipe Fitting (water in/out) with 5/8 LH Std. Inert Gas Fitting Rugged polyethylene non-dent construction Visible water level through tank Net weight: 33 lbs / 15 kg VH1000G: Rotary GEAR Pump 1.8 gpm at 50 psi Rebuildable pump VH1000V: Rotary VANE Pump 1.7 pgm at 50 psi The VH1000 Cooling System is designed for: up to 500 amps up to 500 amps PLASMA Welder/Cutter up to 150 amps Resistance Welders 60 KVA 12,000 BTU/HR @ 75 Degrees Differential Plastic construction contributes to quiet operation of unit. The VH1000 operates in a vertical position for welding carts or space savings, or in a horizontal position for conventional applications. Dynaflux continues to incorporate the latest available technology to develop a more economical, efficient, versatile and compact water cooler. The high strength seamless plastic design provides greater impact and compression strength, rust and dent resistance, weight reduction and greater aesthetics. The extended life pump features a direct drive power system reducing maintenance and increasing performance. Caution: Do Not Over Tighten Fittings On Tank. Excessive Torque May Strip Fittings In Tank. Radiator (C1050) (not shown) Pump - GEAR (P3000) Repair Kit (P3001) Pump - VANE (P1100) Fan (F3075) Motor (M3000) Chassis (S1200) Part No. VH1000G VH1000V VH1000G-230 VH1000V-230 Description Gear Pump 115 v Vane Pump 115 v Gear Pump 230 v Vane Pump 230 v Reservoir (S1210) Reservoir Cap (G1001) WATER COOLERS PAGE 5
SECTION 500 R1000G COOLING SYSTEM Factory set at 50 psi adjustable to 80 psi 3 Gallon reservoir 5.6 / 2.8 amp: 60 Hz 15,000 BTU Dimensions: 23 L x 11 W x 14.75 H 1/4 Female Pipe Fitting (water in/out) with 5/8 LH Std. Inert Gas Fitting Visible water level and flow sight glass Net weight: 42 lbs / 19 kg LENCO WELDING ACCESSORIES LTD. R1000G: Rotary GEAR Pump 1.8 gpm at 50 psi Rebuildable pump The R1000 Cooling System is designed for: up to 750 amps up to 750 amps PLASMA Welder/Cutter up to 200 amps RESISTANCE Welders 75 KVA INDUCTION Welding 5 KW 15,000 BTU/HR @ 75 Degrees Differential Stainless steel construction eliminates coolant contamination due to electrolysis or chemical reactions. All units are plumbed with copper tubing and reinforced hose. New extended life pump. No external plumbing is required because of closed loop water system. A water level float gauge and filler cap are combined in a single unit multi-purpose sight glass which enables operator to observe return water at a distance. Sight Glass Assembly (H1500) DEFENSE ANTI-FREEZE AND PUMP LUBRICANT Provides year round protection for water coolers and other closed loop water recirculators. Part No. DF929 Dilutable DF927 Ready to use Flexible Coupling (H1007) Fan (F3000) Motor (M2002) Pump - GEAR (P5000) Repair Kit (P5001) Subplate (S6001) Part No. Description R1000G Gear Pump 115 v R1000G-230 Gear Pump 230 v WATER COOLERS PAGE 6 Radiator (C4000)
LENCO WELDING ACCESSORIES LTD. SECTION 500 R1100V/G & R1200V/G COOLING SYSTEM Factory set at 50 psi adjustable to 100 psi 3 Gallon reservoir (R1100V/G) 10 Gallon reservoir (R1200V/G) 5.6 / 2.8 amp: 60 Hz 15,000 BTU Dimensions: 23 L x 11 W x 14.75 H (R1100) 23 L x 11 W x 20 H (R1200) 1/4 Female Pipe Fitting (water in/out) with 5/8 LH Std. Inert Gas Fitting Visible water level and flow sight glass Net weight: 42 lbs / 19 kg (R1100V/G) 48 lbs / 22 kg (R1200V/G) R1100G / R1200G: Rotary GEAR Pump 1.8 gpm at 50 psi R1100V / R1200V: Rotary VANE Pump 1.7 gpm at 50 psi Equipped with patented high efficiency air filter to keep radiator clean and reduce machine maintenance. The R1100 Cooling System is designed for: up to 750 amps up to 750 amps PLASMA Welder/Cutter up to 200 amps RESISTANCE Welders 75 KVA INDUCTION Welding 5 KW 15,000 BTU/HR @ 75 Degrees Differential The R1200 Cooling System is designed for: up to 800 amps up to 800 amps PLASMA Welder/Cutter up to 200 amps RESISTANCE Welders 75 KVA INDUCTION Welding 7.5 KW 15,000 BTU/HR @ 75 Degrees Differential Part No. Description R1100G Gear Pump 115 v R1100V Vane Pump 115 v R1200G Gear Pump 115 v R1200V Vane Pump 115 v R1100G-230 Gear Pump 230 v R1100V-230 Vane Pump 230 v R1200G-230 Gear Pump 230 v R1200G-230 Vane Pump 230 v Sight Glass Assembly (H1500) Sight Glass Cap (H1501) Subplate (S6001) Motor (M3000) Fan (F3025) Radiator (C4000) Pump - GEAR (P1110) Repair Kit (P3001) Pump VANE (P1100) WATER COOLERS PAGE 7
SECTION 500 R2000G COOLING SYSTEM Factory set at 50 psi adjustable to 100 psi 6 Gallon reservoir 13.4 / 6.7 amp: 60 Hz 1 phase 230/190 vac/ 3 phase 50/60 hz 460/380 vac/ 3 phase 50/60 hz 2.6 / 1.3 amp: 60 Hz 3 phase 30,000 BTU Dimensions: 23 L x 16 W x 19.5 H 1/4 Female Pipe Fitting (water in/out) with 5/8 LH Std. Inert Gas Fitting Visible water level and flow sight glass Net weight: 68 lbs / 31 kg R2000G: Rotary GEAR Pump 3.5 gpm at 50 psi Rebuildable pump LENCO WELDING ACCESSORIES LTD. The R2000 Cooling System is designed for: up to 1,000 amps up to 1,000 amps PLASMA Welder/Cutter up to 300 amps RESISTANCE Welders 150 KVA INDUCTION Welding 10 KW 30,000 BTU/HR @ 75 Degrees Differential Stainless steel construction eliminates coolant contamination due to electrolysis or chemical reactions. All units are plumbed with copper tubing and reinforced hose. New extended life pump. No external plumbing is required because of closed loop water system. A water level float gauge and filler cap are combined in a single unit multi-purpose sight glass which enables operator to observe return water at a distance. Water filter on pump inlet protects pump and extends pump life. Sight Glass Assembly (H1500) Fan (F2008) Subplate (S2002) Pump - GEAR (P2000) Repair Kit (P2001) Flexible Coupling (H1007) Motor (M2004) 1 Phase ¾ HP 115/230 vac 50/60Hz Motor (M2005) 3 Phase ¾ HP 230/460/190/380 50/60 Hz Part No. Description R2000G Gear Pump 115 v 1 ph R2000G-230/1 Gear Pump 230 v 1 ph R2000G-230/3 Gear Pump 230/190 v 3 ph R2000G-460/3 Gear Pump 460/380 v 3 ph WATER COOLERS PAGE 8 Radiator (C2011)