Replacement Timing Relays for P28 and P29 Lube Oil Controls

Code No. LIT-1927395 Replacement Timing Relays for P28 and P29 Lube Oil Controls Selection Chart Product Code Number Voltage Alarm Circuit Timing (Seconds) RLY13A-616R 120/240 VAC No 120 RLY13A-613R 12 VAC No 120 RLY13A-609R 24 VAC or DC No 120 RLY13A-608R 120/240 VAC Automatic No 90 RLY13A-602R 120/240 VAC No 90 RLY13A-600R 120/240 VAC No 60 RLY13A-617R 120/240 VAC No 45 RLY13A-610R 120/240 VAC No 30 R-114

Code No. LIT-1927275 P100 Series Encapsulated Pressure Switches P100 Series switches are encapsulated, nonadjustable, single-pole, single-throw (SPST), direct-mount switches for use with non-corrosive refrigerants. The switches are available with automatic reset in both open low and open high configurations and manual reset with open high action. Refer to the P100 Series Encapsulated Pressure Controls Product Bulletin (LIT-121485) for important product application information. Features compact size and light weight allow for direct mounting trip-free manual reset (manual reset models); contacts cannot be overridden by continued depression of the reset button use with all non-corrosive refrigerants encapsulated switch, dust tight 1/4 in. Internal flare fitting with built-in Schrader type depressor is standard electrical connections are made to 48 in. leads Applications low limit, high limit, and fan cycling control in commercial refrigeration ice machines food service equipment Repair Information If the P100 Series Encapsulated Pressure Switches fails to operate within its specifications, replace the unit. For a replacement switch, contact the nearest Johnson Controls representative. P100 Series Encapsulated Pressure Switch Technical Specifications Standard Duty Electrical Contact Ratings Switch Action-Model SPST-P100AA, AC, AG, AJ, CA, CC, CG, CJ, DA, and Numbers DC SPST-P100AP, CP Motor Ratings 120V 240V 120V 240V AC Full Load Ampere 5.8 2.9 6.0 6.0 AC Locked Rotor Ampere 34.8 15.0 36.0 36.0 Non-Inductive Ampere - - - - Inductive Ampere - - - - Pilot Duty 375 VA 375 VA Heavy Duty Electrical Contact Ratings Switch Action-Model Numbers SPST-P100AE and CE SPDT-P100EE Motor Ratings 120V 240V 120V 240V Contact Type N.O. N.C. N.O. N.C. N.O. N.C. N.O. N.C. AC Full Load Ampere 13.0 13.0 10.0 10.0 5.8 13.0 2.9 10.0 AC Locked Rotor Ampere 65.0 60.0 45.0 45.0 34.8 60.0 17.4 45.0 Non-Inductive Ampere 13.0 25.0 10.0 25.0 10.0 25.0 5.0 25.0 Inductive Ampere 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 Pilot Duty 278 VA 125 VA 278 VA 125 VA 278 VA 125 VA 278 VA 125 VA R-115

R-116 Selection Chart (Part 1 of 3) Product Code Switch Number Action P100AC-1C 2 Setpoints - psig (kpa) Opens Closes Ranco 5 (34) 20 (138) MPL-7001 - ACB-2UA318W - Replaces: Saginomiya Danfoss Klixon Supco Wilspec Robertshaw PS80-K2-F0305-020-005 International Refrigeration Products P100AP-10C 40 (276) 60 (413) HR00011A1R704 - - - - - - - - P100AP-357C Open on Pressure PS80-K2-F0326- Drop 40 (276) 80 (551) - 3100-052 ACB-2UA354W - 080-005 SLP4080 HR201A080040D SLP4080 - Gemline SLP0520 HR201A020005D SLP0520 - P100AP-354C 5 (34) 30 (207) - 3100-002 - - - SLP0530 - - - P100AP-15C 10 (69) 25 (172) HR00011A1R702 3100-050 ACB-2UA97W 061F7523 PS80-K2-F0307-025-005 SLP1025 HR201A025010D SLP1025 - P100AP-201C 10 (69) 32 (221) MPL-7011 3100-050 ACB-2UA101 - - SLP1032 - SLP1032 - P100AC-2C 2 15 (103) 30 (207) MPL-7002 - - - - - - - - P100AP-356C 20 (138) 45 (310) - 3100-003 ACB-2UA40W - - SLP2045 - - - P100AP-12C 25 (172) 50 (345) - - ACB-2UA143 - P100AP-9C 25 (172) 80 (551) MPL-7003 3101-003 - - PS80-K2-F0316-050-005 PS80-K2-F0325-080-005 SLP2550 HR201A050025D SLP2550 - SLP2580 HR201A080025D SLP2580 - P100AP-105C 30 (207) 60 (413) - 3100-004 ACB-2UA94 - - - - SLP3560 - P100AP-2C 35 (241) 60 (414) MPL-7004 3100-004 - - - SLP3560 - SLP3560 - P100AP-361C 50 (345) 90 (620) - - - - PS80-KS-F0328-090-005 SLP5090 HR201A090050D SLP5090 - P100AP-358C 75 (517) 100 (689) - - ACB-2UA441W - - - - SLP75100 - P100AP-351C 1 75 (517) 120 (827) - - - - - SFC75120 - - - P100AP-352C 1 110 (758) P100AP-353C 1 126 (868) P100AP-3C 1 150 (1,034) P100AP-359C 1 165 (1,137) P100AP-4C 1 170 (1,172) P100AP-362C 1 195 (1,344) P100AP-200C 1 195 (1,344) 170 (1,171) 264 (1,819) 225 (1,551) 215 (1,481) 250 (1,724) 240 (1,654) 275 (1,895) - - - - - SFC110170 - - - - - - - - SFC125265 - - - MPF-7008 - ACB-2UA685W - - SFC150225 - - - - 3100-215 ACB-2UA48W - - - - - - - - ACB-2UA631W - - SFC170250 - - - - 3100-080 - - - - - - - P100 Series Encapsulated Pressure Switches (Continued) Pressure Sensors and Accessories

R-117 Selection Chart (Part 2 of 3) Product Code Switch Number Action P100AP-354C 1 P100EE-79C Open on Pressure Drop 210 (1,447) 300 (2,068) P100AP-332C 1 300 (2,068) P100CP-157C P100CP-158C P100CP-159C Open on Pressure Rise 225 (1,550) 250 (1,723) 270 (1,860) P100CC-9C 2 275 (1,896) P100CP-91C P100CP-166C P100CP-140C P100CP-160C P100CP-161C P100CP-162C P100EE-78C P100CP-1C P100CP-156C P100CP-163C P100CP-2C P100CP-164C P100CP-38C P100CP-165C P100CP-85C Setpoints - psig (kpa) Opens 300 (2,067) 325 (2,239) 350 (2,412) 375 (2,584) 400 (2,756) 400 (2,756) 400 (2,756) 400 (2,758) 410 (2,825) 425 (2,928) 425 (2,930) 450 (3,101) 500 (3,447) 600 (4,134) 665 (4,585) Closes 275 (1,895) 370 (2,551) 400 (2,758) 150 (1,034) 150 (1,034) 200 (1,378) 175 (1,207) 200 (1,378) 225 (1,550) 245 (1,688) 275 (1,895) 200 (1,378) 280 (1,929) 300 (2,068) 300 (2,068) 290 (1,998) 300 (2,067) 325 (2,241) 250 (1,723) 325 (2,241) 475 (3,273) 565 (3,895) Ranco Robertshaw - - ACB-2UA319W - - SFC210275 - SFC210275 - MPF7010 - ACB-2UA627W 061F7514 - SFC300400 - - - - - - - PS80-K1-0336- 250-150 SHP250150 HR202A250150D SHP250150 - - 3100-112 ACB-2UB724W - - - - - - - - ACB-2UB723W - - - - 061F6080-3100-150 ACB-2UB273W 061F3212 PS80-K1-0341- 300-200 PS80-K1-0346- 320-230 PS80-K1-0348- 350-245 - HR202A300200D SHP300200 - SHP325225 HR202A325230D - - - HR202A350245D SHP350250 - - - ACB-2UB191 061F7509 - - - SHP375265 - - 3100-152 - - - - - - PS80-K1-0357- 400-200 PS80-K1-0358- 400-280 SHP400200 HR202A400200D SHP400200 - SHP400280 HR202A400280D SHP400280 - MPH-7107 3100-151 ACB-2UB35 061FS14 PS80-K1-0359- 400-300 SHP400300 HR202A400300D SHP400300 PC 151 - - - - PS80-K1-0360- 425-300 SHP425300 HR202A425300D SHP425300 - MPH-7108 3100-100 ACB-2UB282W - - SHP425325 - - PC 100 - - - - Replaces: Saginomiya Danfoss Klixon Supco Wilspec PS80-K1-0363- 450-250 International Refrigeration Products SHP450250 HR202A450250D SHP450250 - HR00011B1R704 - - 061F7517 - SHP600475 - - - - - - - - SHP665565 - - - Gemline P100 Series Encapsulated Pressure Switches (Continued) Pressure Sensors and Accessories

R-118 Selection Chart (Part 3 of 3) Product Code Switch Number Action P100DA-35C Open on Pressure Rise 350 (2,413) P100DC-3C 3 375 (2,586) P100DA-1C P100DA-100C P100DA-101C P100DA-2C P100DA-86C P100DA-81C Setpoints - psig (kpa) Opens 410 (2,827) 415 (2,859) 440 (3,032) 475 (3,275) 575 (3,964) 630 (4,343) Closes Ranco 1. Models are designed for condenser fan cycling. 2. Includes conduit clamp for 3/8 in. flexible metal conduit. 3. Includes conduit box with opening for 1/2 in. conduit connector. Robertshaw Replaces: Saginomiya Danfoss Klixon Supco Wilspec International Refrigeration Products - - ACBPC45M - - - - - - - - - - - - - SMR375 - - 3100-103 ACBPB115M - 29PSL012-24 SMR410 HM202A410000D SMR410 PC 103-3100-103 - - 29PSL004-1 - HM202A415000D SMR410 - - - - - - SMR440 - SMR440 - - 3100-106 - - - - HM202A475000D - - - - - - - SMR575 - - - - - - - - SMR630 - - - Gemline P100 Series Encapsulated Pressure Switches (Continued) Pressure Sensors and Accessories

Code No. LIT-1900405 P499 Series Electronic Pressure Transducers The P499 Series Electronic Pressure Transducers are compact, economical, rugged, direct-mount pressure transducers designed for use in commercial refrigeration and air conditioning applications. These transducers produce an analog signal based on the sensed pressure. The P499 Series transducers feature environmentally protected electronics with stainless steel construction. The digitally compensated P499 transducers are highly accurate over a broad temperature range, resisting the effects of wide ambient temperature swings, high humidity, condensation, and icing. The pressure port is machined from a solid piece of 17-4PH stainless steel. No O-rings, organic materials, or welds are exposed to the pressure media, allowing for a leak-proof, all-metal, sealed pressure system. The P499 Series transducers operate with any corrosive or non-corrosive pressure medium that is compatible with 17-4PH stainless steel, including water, condensate, carbon dioxide, glycol, most refrigerants (including ammonia), and many other compatible fluids and gases. The P499 Series provides transducers in a variety of pressure ranges, covering most common refrigeration and air conditioning applications. Features single-piece machined 17-4PH stainless steel pressure port provides a durable assembly that eliminates refrigerant loss due to O-ring or weld failures; resists damage due to physical shock, vibration, and pressure pulsations; enables use with non-corrosive or corrosive pressure media that is compatible with 17-4PH stainless steel. environmentally protected electronics withstand the effects of adverse conditions associated with typical HVAC/R applications, including freeze/thaw applications on suction lines. reliable, repeatable performance and long operating life minimizes service and replacement costs. many available pressure ranges provide a single line of transducers for all refrigeration and air conditioning application needs. 1% total error band provides high-accuracy performance. slender body design facilitates use of deep-socket wrenches for ease of installation; requires zero turning radius. CE and UL agency listings allow for global applications. P499 Electronic Pressure Transducers; Style 47 Fitting Shown on the Left and Style 49 Fitting Shown on the Right Refer to the P449 Series Electronic Pressure Transducer Product/Technical Bulletin (LIT-12011190) for important product application information. Repair Information If the P499 Series Electronic Pressure Transducer fails to operate within its specifications, replace the unit. For a replacement transducer, contact the nearest Johnson Controls representative. Accessories P499 transducers require wire harnesses for all models that do not have an integral cable. Wire Harnesses with Packard Electrical Connectors Product Code Number 1 Length WHA-PKD3-200C 6-1/2 ft (2.0 m) WHA-PKD3-400C 13 ft (4.0 m) WHA-PKD3-600C 19-5/8 ft (6.0 m) 1. Wire harnesses for P399 transducers and P499 transducers are interchangeable. Selection Chart 0.5 to 4.5 VDC Ratiometric P499 Transducer Models with Packard Electrical Connections, psis Product Code Number Pressure Connection Pressure Range 1 P499RAPS100C 1/8 in. 27 NPT External Thread (Style 49) -10 psis (-0.7 bar) P499RAPS100K [20 in. Hg] 100 psis (6.9 bar) P499RAPS102C 0 psis 200 psis (13.8 bar) P499RAPS102K P499RCPS100C P499RCPS100K 1/4 in. SAE 45 Flare Internal Thread (7/16-20 UNF) with Depressor (Style 47) -10 psis (-0.7 bar) [20 in. Hg] or 2 1. Transducer sealed and rated for IP67 harsh environments. 2. The pack comes with a transducer only - you must order the wire harness separately. The is packaged with a transducer, 6-1/2 ft (2 m) wire harness, and technical documentation. 100 psis (6.9 bar) P499RAPS102C 0 psis 200 psis (13.8 bar) P499RAPS102K R-119

P499 Series Electronic Pressure Transducers (Continued) 0.5 to 4.5 VDC Ratiometric P499 Transducer Models with Integral 2 m (6-1/2 ft) Shielded Cable, psis Product Code Number Pressure Connection Pressure Range 1 P499RCSS101C 1/4 in. SAE 45 Flare Internal Thread (7/16-20 UNF) with Depressor (Style 47) 1. Transducer sealed and rated for IP67 harsh environments. 0 psis 100 psis (6.9 bar) 0.5 to 4.5 VDC Ratiometric P499 Transducer Models with Packard Electrical Connections, psi Product Code Number Pressure Connection Pressure Range or 1 P499RAP-101C 1/8 in. 27 NPT External Thread (Style 49) 0 psi 100 psi (6.9 bar) P499RAP-101K P499RAP-102C 0 psi 200 psi (13.8 bar) P499RAP-105C 0 psi 500 psi (34.5 bar) P499RAP-105K P499RAP-107C 0 psi 750 psi (51.7 bar) P499RAP-107K P499RCP-101C P499RCP-101K 1/4 in. SAE 45 Flare Internal Thread (7/16-20 UNF) with Depressor (Style 47) 0 psi 100 psi (6.9 bar) P499RCP-105C 0 psi 500 psi (34.5 bar) P499RCP-105K P499RCP-107C 0 psi 750 psi (51.7 bar) P499RCP-107K 1. The pack comes with a transducer only - you must order the wire harness separately. The is packaged with a transducer, 6-1/2 ft (2 m) wire harness, and technical documentation. 0 to 10 VDC P499 Transducer Models with Packard Electrical Connections, psi Product Code Pressure Connection Pressure Range or 1 Number P499VAP-101C 1/8 in. 27 NPT External Thread (Style 49) 0 psi 100 psi (6.9 bar) P499VAP-101K P499VAP-105C 0 psi 500 psi (34.5 bar) P499VAP-105K P499VAP-107C 0 psi 750 psi (51.7 bar) P499VAP-107K P499VCP-101C P499VCP-101K 1/4 in. SAE 45 Flare Internal Thread (7/16-20 UNF) with Depressor (Style 47) 0 psi 100 psi (6.9 bar) P499VCP-105C 0 psi 500 psi (34.5 bar) P499VCP-105K P499VCP-107C 0 psi 750 psi (51.7 bar) P499VCP-107K 1. The pack comes with a transducer only, you must order the wire harness separately. The is packaged with a transducer, 6-1/2 ft (2 m) wire harness, and technical documentation. 4 to 20 ma P499 Transducer Models with Packard Electrical Connections, psi (Part 1 of 2) Product Code Pressure Connection Pressure Range or 1 Number P499AAP-101C 1/8 in. 27 NPT External Thread (Style 49) 0 psi P499AAP-101K P499AAP-105C P499AAP-105K P499AAP-107C P499AAP-107K 0 psi 0 psi 100 psi (6.9 bar) 500 psi (34.5 bar) 750 psi (51.7 bar) R-120

P499 Series Electronic Pressure Transducers (Continued) 4 to 20 ma P499 Transducer Models with Packard Electrical Connections, psi (Part 2 of 2) Product Code Pressure Connection Pressure Range or 1 Number P499ACP-101C P499ACP-101K P499ACP-105C P499ACP-105K P499ACP-107C P499ACP-107K Technical Specifications 1/4 in. SAE 45 Flare Internal Thread (7/16-20 UNF) with Depressor (Style 47) 0 psi 0 psi 0 psi 100 psi (6.9 bar) 500 psi (34.5 bar) 750 psi (51.7 bar) 1. The pack comes with a transducer only, you must order the wire harness separately. The is packaged with a transducer, 6-1/2 ft (2 m) wire harness, and technical documentation. Pressure Ranges Maximum Working Pressure Burst Pressure Vacuum Media Compatibility Output Signal Supply Voltage 0.5 to 4.5 VDC Ratiometric Output P499 Series Electronic Pressure Transducers -10 to 100 psis, 0 to 100 psi, 0 to 200 psi, 0 to 500 psi, 0 to 750 psi 2x Pressure Range; short duration; infrequent, abnormal condition 5x Pressure Range 30 microns (0.03 mm Hg); short term All media compatible with 17-4PH stainless steel, including ammonia 0.5 to 4.5 VDC, 0 to 10 VDC, or 4 to 20 ma 4 to 20 ma Output 9 to 30 VDC, SELV or Class 2 5.0 ±0.25 VDC, Safety Extra-Low Voltage (SELV) or Class 2 0 to 10 VDC Output 12 to 30 VDC, SELV or Class 2 Direct-Mount Pressure Connections 1/8 in. 27 NPT External Thread (Style 49), 1/4 in. SAE 45 Flare Internal Thread (7/16-20 UNF) with Depressor (Style 47) Temperature and Humidity Linearity Accuracy Storage Operating Compensated Range Humidity -40 to 257 F (-40 to 125 C) -40 to 185 F (-40 to 85 C) -4 to 185 F (-20 to 85 C) 0 to 100% RH ±0.25% Full Span best fit straight line ±1% Full Span (maximum) over compensated temperature range Materials Pressure Port 17-4PH stainless steel construction Vibration Shock Packard Connector 40% glass-filled Polyetherimide (PEI) 20G, 20 to 200 Hz 200G/11 ms Compliance United States UL Listed, File E29374, CCN NKPZ UL Recognized for Use in Class I, Division 2 Hazardous Locations, File E322274 Canada Europe Australia/ New Zealand UL Listed, File E29374, CCN NKPZ7 UL Recognized for Use in Class I, Division 2 Hazardous Locations, File E322274 CE Mark Johnson Controls, Inc., declares that this product is in compliance with the essential requirements and other relevant provisions of the EMC Directive 2004/108/EC. C-Tick Mark, Emissions Compliant R-121

Code No. LIT-1900005 R310A Series Current Sensing Switch The R310A Series Current Sensing Switch detects alternating current (AC) flow in a single circuit without being connected to that circuit. It may be used in any application where current detection is required. The R310A replaces the R10A used with Johnson Controls/PENN time delay oil failure cutout controls such as the P28, P45, and P445. These applications incorporate internal line breaking overload protection, where lockout due to overload cycling is unacceptable or undesirable. The R310A switch is not intended to detect breakage of belts. The R310A is molded in a high dielectric material, which permits mounting inside a starter or contactor. Refer to the R310A Series Current Sensing Switch Product Bulletin (LIT-121536) for important product application information. Features small size allows mounting in small enclosure solid-state switching contains no moving parts to fail low 0.5 ampere activation allows monitoring of most small equipment circuit loads high 200 ampere monitoring capacity allows monitoring of heavy duty equipment large 0.70 in. (18 mm) diameter sensor hole accepts large diameter wire sizes and multiple coilings of smaller diameter wire sizes Selection Chart Product Code Number R310AD-1C R310AE-2C Applications Current Sensing Switch Voltage switching capacity: 0 to 30 VAC Used with: P445 Electronic Lube Oil Control Current Sensing Switch Voltage switching capacity: 120 to 240 VAC Used with: P28 and P45 Electromechanical Lube Oil Controls The R310A Current Sensing Switch is designed to sense alternating current in a conductor that passes through its opening. The R310A sensor closes an electronic switch if the alternating current in the conductor exceeds 0.5 amperes. Thus, the R310A switch may be used for several purposes: switch a pilot circuit energize a run signal on a device such as a fan, motor, or pump monitor motors and electrical loads for proper operation monitor on/off status of process motors The R310A Series Current Sensing Switch is available in two models. The R310AD-1 switch is for use in low-voltage applications, such as with the P445 Electronic Lube Oil Control. The R310AE-2 switch is for use in high-voltage applications, such as with the P28 and P45 Electromechanical Lube Oil Controls. The R310A switch avoids nuisance lockouts by sensing the lack of current flow to the motor. Regardless of the reason for motor shutdown, the lube oil control time delay circuit is de-energized when the current flow in the motor supply line drops below 0.5 amperes. In a typical application, the lube oil control does not lock out when the control circuit shuts off the compressor. However, if the compressor overheats and the internal thermal overload circuits open, the compressor shuts itself down, which causes the oil pressure to drop. This drop in oil pressure will energize the lube oil control heater (P28, P45) or timer (P445), causing a Technical Specifications Switch Action Current Sensing Range nuisance lockout. In this situation, the R310 switch senses the lack of current to the motor, and is used to de-energize the time delay heater (P28, P45) or electronic timer (P445) before a nuisance lockout occurs. Repair Information If the R310A Series Current Sensing Switch fails to operate within its specifications, replace the unit. For a replacement switch, contact the nearest Johnson Controls representative. R310A Series Current Sensing Switch R310AD-1C R310AE-2C SPST, normally open 0.5 to 200 Amperes 0.75 to 200 Amperes Switch Threshold R310AD-1C 0.5 Amperes Sensor Supply Voltage Switching Capacity (General Purpose) Output Polarity R310AE-2C R310AD-1C R310AE-2C 0.75 Amperes Enclosure NEMA 1 Ambient Operating Conditions Ambient Storage Conditions Dimensions (H x W x D) Sensor Hole Size Agency Listings R310A Series Current Sensing Switch Induced from monitored conductor, isolation 600 VAC RMS 0.1A at 30 VAC/DC 0.5 at 250 VAC/DC Non-polarity sensitive output 5 to 140 F (-15 to 60 C); 0 to 95% RH, noncondensing -40 to 158 F (-40 to 70 C); 0 to 95% RH 2.34 x 1.85 x 0.875 in. (59 x 46 x 22 mm) 7/10 in. (17 mm) Diameter UL Guide NRNT cul Guide NRNT7 R-122

Code No. LIT-1900108 Universal Mounting Brackets The 271-51 is the universal mounting bracket used with many Johnson Controls/PENN products. BKT38A-601R contains one mounting bracket with screws. BKT38A-600R contains five 271-51 angle mounting brackets with screws. Selection Chart Product Code Number 271-51 Universal Mounting Bracket BKT38A-600R Five Universal Mounting Brackets with ten screws 271-51 Universal Mounting Bracket R-123

Code No. LIT-1900131 SEC99A UltraCap Armored Capillary The SEC99A UltraCap Armored Capillary is designed for use as a pressure connection in refrigeration and air conditioning applications. This small-orifice capillary minimizes pressure pulsation, and the brass armor sleeve improves resistance to abrasion caused by vibration. The copper capillary inside the armored sleeve allows no effusion of refrigerant to the environment. Selection Chart Product Code Number Schrader Depressor in One End SEC99AA-18C SEC99AA-24C SEC99AA-36C SEC99AA-48C SEC99AA-60C Two straight fittings Length: 18 in. (457 mm) Two straight fittings Length: 24 in. (610 mm) Two straight fittings Length: 36 in. (914 mm) Two straight fittings Length: 48 in. (1,219 mm) Two straight fittings Length: 60 in. (1,524 mm) Schrader Depressor in Both Ends SEC99AB-18C SEC99AB-24C SEC99AB-36C SEC99AB-48C SEC99AB-60C One straight and one 90 fitting Length: 18 in. (457 mm) One straight and one 90 fitting Length: 24 in. (610 mm) One straight and one 90 fitting Length: 36 in. (914 mm) One straight and one 90 fitting Length: 48 in. (1,219 mm) One straight and one 90 fitting Length: 60 in. (1,524 mm) UltraCap is designed for use with 1/4 in. SAE external flare fitting connectors, such as those found on the Johnson Controls/PENN lines of pressure-actuated controls. Integral Schrader valve depressors are available. UltraCap Armored Capillary is compatible with all common non-corrosive refrigerants. The UltraCap capillary is available in a variety of lengths, and in models with two straight fittings or with one straight fitting and one 90 elbow fitting. Repair Information If the SEC99A UltraCap Armored Capillary fails to operate within its specifications, replace the unit. For a replacement capillary, contact the nearest Johnson Controls representative. Technical Specifications Capillary Diameters Temperature Range Burst Pressure Maximum Working Pressure Suggested Torque to Seal Fittings: Straight 90 Elbow Material Agency Listings SEC99A UltraCap Armored Capillary SEC99AB and SEC99AA UltraCap Armored Capillaries Inside: 0.062 in. (1 mm); Outside: 0.125 in. (3 mm) -50 to 350 F (-46 to 177 C) 3,000 psig (20,685 kpa) 600 psig (4,137 kpa) 8 to 10 lb ft (10.9 to 13.6 N m) 1/4 in. Internal Flare Connector with Schrader Depressor 1/4 in. Internal Flare Connector with Schrader Depressor Forged Brass Nut with Copper Stem UL Recognized: File SA9457, CCN SFCS2 UL Recognized for Canada: SA9457, CCN SFCS8 R-124