310HD Double-Offset
The Leader In Advanced Composite Valves Nil-Cor is the pioneer and world leader in the design, production and application of industrial valves made from Fiberglass and Graphite reinforced resins. First introduced in 19, Nil-Cor Valves provide the most advanced, safe and reliable solutions for corrosive industrial applications once thought to be solely the province of steel, plastic or alloy valves. Today, as fiber-reinforced plastic piping systems and tanks challenge traditional thinking in corrosive fluid applications, Nil-Cor offers a full range of ball, butterfly and check valves to make an all-frp system a reality. Nil-Cor has accumulated an impressive list of Firsts : 2 www.nilcor.com Ph. 1-554-3100 Fax 1-554-523
310HD Double-Offset The Nil-Cor Advantage Advanced Composite Technology Nil-Cor offers a full range of composite ball, butterfly and check valves manufactered of high-performance polymer matrix materials reinforced with glass or graphite fibers. Nil-Cor pioneered the production of the High-Performance Double-Offset Butterfly Valve, combining the strength, durability, corrosion resistance and lightweight characteristics of advanced composites. Graphite fiber-reinforced plastics are revolutionizing aircraft, spacecraft, and sporting good products due to the exceptional performance improvements in weight, fatigue strength and durability. Combined with the outstanding chemical resistance, durability and temperature capabilities provided, graphite fiber-reinforced plastics are an industrial-strength solution to handling literally thousands of corrosive chemicals. Harsh environments such as offshore rigs and industrial waste sumps can destroy metal and thermoplastic valves, even with special painting. Nil-Cor valves are guaranteed impervious to external corrosion and UV degradation. Double-Offset Technology Rugged Seat Secured in the Body, Away From the Flow Stream 30 Uninterrupted Seating Surface Camming Action of the Double-Offset Disengages From the Seat as it Turns, Reducing Torque and Seat Wear Smaller Disc Chord for use in Lined Pipe Applications Temperature Range from 0 F to 250 F With Short Term Exposure to 300 F Blow-out Proof Stem Design VALVE SHAFT OFFSET FROM VALVE SHAFT 310HD Double-Offset OFFSET FROM SEAT www.nilcor.com Ph. 1-554-3100 Fax 1-554-523 3
3-12 Series Hastelloy Packing Follower and Bolts for Secure, Adjustable Stem Seal SEAT PTFE V-Ring Packing Tight Shut-Off Seat Choice of FKM Elastomer or PTFE Disc-Shaft Connection Flats Run Full Diameter of the Disc for Tight, Low Stress Drive Heavy Duty Composite Body Meets ANSI B1.10 Wide Pattern for Superior Durability ISO 5211 Actuator Mounting Large Diameter GRP Encapsulated 1-4 PH Stainless Steel Shaft for Strength and Stability Streamlined Disc for High Flow and Low Turbulence Durable Stainless Steel Threaded Inserts on Lug Bodies PTFE Item No. Description Material 1 Hand Lever D.I./Epoxy Coated 1 1-A Gear (Not Shown) Aluminum/Painted 2 Hex Head Screws 18-8 Stainless Steel 5 2 3 Lock Washers 18-8 Stainless Steel 4 Hex Nuts 18-8 Stainless Steel 5 Positioning Plate 31 Stainless Steel Hex Head Screws H2 Hastelloy 8 Gland H2 Hastelloy 8 Packing Virgin PTFE V-Ring 9 9 Shaft 1-PH/GR-VE or Hastelloy /GR-VE 11 10 3 4 10 Valve Body 11 Disc 12 Shaft Pin Glass or Graphite Reinforced Vinyl Ester Graphite Reinforced Vinyl Ester Graphite-Reinforced Kynar 13 Seat Ring Viton or PTFE 14 14 Seat Retainer Graphite Reinforced Vinyl Ester, 10 and 12 No retainer used 15 Insert Lug 31 Stainless Steel 15 13 12 4 www.nilcor.com Ph. 1-554-3100 Fax 1-554-523
310HD Double-Offset OPTIONS 14-48 Series Viton Stainless Steel Packing Follower and Bolts for Secure, Adjustable Stem Seal Blow-out Proof Stem Streamlined Disc for High Flow and Low Turbulence Composite Threaded Lug Bodies Optional PTFE V-Ring Packing Large Diameter GRP Encapsulated 1-4PH Stainless Steel Shaft for Strength and Stability Tight Shut-Off Seat Choice of FKM Elastomer or PTFE Disc-Shaft Connection Flats Run Full Diameter of the Disc for Tight, Low Stress Drive Heavy Duty Composite Body Meets MSS-SP- W-3 Extra Wide (14-24 ) MSS-SP-8 Type 1 (Above 24 ) Item No. Description Material 1 Gland Nuts, Top 304 Stainless Steel 1 2 3 2 Gland Studs, Top 304 Stainless Steel 3 Gland, Top 31 Stainless Steel 4 Shaft 1-4PH SS/Vinyl Ester 4 5 Packing, Top Virgin PTFE V-Rings Disc Spacer, Top GR PTFE Valve Body 8 Disc Fiberglass-Reinforced Vinyl Ester Fiberglass-Reinforced Vinyl Ester 9 Seat Ring Viton GF or PTFE 5 10 Disc Spacer, Bottom GR PTFE 11 Packing, Bottom Virgin PTFE V-Rings 8 12 Gland, Bottom 31 Stainless Steel 9 13 Gland Stud, Bottom 304 Stainless Steel 14 Gland Nut, Bottom 304 Stainless Steel 11 15 Nuts, Bottom Shield 304 Stainless Steel 10 12 1 Lock Washers 304 Stainless Steel 1 Hex Head Cap Screws 18 Bottom Shield 304 Stainless Steel Epoxy-Coated Carbon Steel 1 14 13 18 15 1 www.nilcor.com Ph. 1-554-3100 Fax 1-554-523 5
How to Order 3-12 Series 310HD F T H A SIZE (IN) NIL-COR SERIES BODY STYLES SEATS BOLTS OPERATOR SPECIAL DESIGNATIONS 3 4 8 10 12 310HD - VE/Glass F - Through-Drilled Wafer T - PTFE H - Hastelloy 300HD - VE/Graphite L - Threaded Lug V - Viton 4-HOLES, O-DIA THRU HOLES STRADDLE CENTERLINES ON P-BOLT CIRCLE L - 10-Position Lever (3-8 only) A - Actuation (Specify) GR - Gear Rimmed Wheel CW - Gear w/chain Wheel GD - Gear w/drive Nut Blank - None E - Stem Extension (Specify Length) J - Stem and Vane O-rings P - 10 Position lever N - None W N -Dia M -Flats W HW THRU-DRILLED HOLES S-BOLT CIRCLE E F X X Y T-HOLE DIAMETER U-NUMBER OF HOLES C D A B Shutoff Pressure / Temperature 3" - 12" HD Butterfly Design 200 15 SIZE (IN) A B C D E F S T U 3.50 2.00 11.31 2.50.38.5.00 0.5 4 4 9.00 2.300 13.31 3.4.13 8.81.50 0.5 8 11.00 2.810 15.00 5.38 8.13 9.0 9.50 0.88 8 8 13.50 2.940 18.13.5 9.50 11.38 11.5 0.88 8 10 1.00 3.130 21.31 9.40 11.38 13.31 14.25 1.00 12 12 19.00 3.380 24.44 11.42 12.88 14.94 1.00 1.00 12 Pressure (psig) 150 125 100 5 50 25 0 0 25 50 100 150 15 250 200 250 Temperature ( F) ACTUATOR MOUNTING DIMENSIONS LEVER DIMENSIONS GEAR DIMENSIONS OPERATING TORQUE (IN-LBS) WEIGHT (LBS) SIZE (IN) M (+.000.002) N O P W X W X Y HW Cv <50 psid >50 psid BARE W/ LEVER W/ GEAR 3 0.433 0.555 0.345 4.01 14.00 8.13 5.48.83 10.44.00 220 240 240 5.8 9. 9.8 4 0.551 0.13 0.423 4.01 14.00 8.88 5.48 10.08 11.9.00 395 30 480 10.1 14.0 14.1 0.9 0.84 0.423 4.01 14.00 9.8.91 10.94 12.33.00 950 80 90 1.8 20. 23.8 8 0.8 1.110 0.423 4.01 14.00 11.21.53 12.31 14.0 8.00 2250 180 210 24.4 28.3 31.4 10 1.03 1.425 0.502 4.921 NA NA 9.24 13.85 18.5 12.00 340 2400 4200 42.0 NA 5.0 12 1.03 1.425 0.502 4.921 NA NA 9.24 15.81 21.25 14.00 5180 390 30 3.0 NA 8.0 All dimensions are in inches unless otherwise noted. www.nilcor.com Ph. 1-554-3100 Fax 1-554-523
310HD Double-Offset How to Order 14-48 Series 3 310HD F T S A SIZE (IN) 14 1 18 20 24 2 30 3 42 48 NIL-COR SERIES BODY STYLES SEATS BOLTS OPERATOR 310HD - VE/Glass F - Through-Drilled Wafer T - PTFE S - 31 S.S. A - Actuation (Specify) 300HD - VE/Graphite L - Threaded Lug V - Viton *H - Hastelloy GR - Gear Rimmed Wheel (Upon Application Only) *Hastelloy option include CW - Gear w/chain Wheel C2 packing gland. GD - Gear w/drive Nut O N - None W N SPECIAL DESIGNATIONS Blank - None E - Stem Extension (specify length) J - Stem and Vane O-rings P- Square X D E F G Dia. Thru Holes Q U B C Threaded Lug Style: HL - Dia x Thd, Tapped Holes J - Bolt Circle S T V Y A M Shaft Offset L Full-Face Syle: HF-Dia Thru Holes J - Bolt Circle K - Thd Size x Deep Tapped 4 Plcs Each Face 200 R Shutoff Pressure / Temperature 14" - 48" HD Butterfly Design 15 SIZE (IN) 14 1 18 20 24 2 30 3 42 48 310HD Double-Offset TORQUE (IN-LBS) TORQUE (NM),850 10,85 13,850 19,90 23,85 29,850 39,100 2,385 81,000 105,000 88 1,20 1,55 2,258 2,9 3,33 4,41,04 9,152 11,83 Cv 5,94,44 10,120 12,320 18,040 19,500 2,280 39,280 55,000 2,15 SIZE (IN) A B C D E F G HF HL J K No. Holes M N O P Q R S T U V W X Y WT. WT. BARE W/ STEM GEAR (LBS) (LBS) 14 2.5 13.5 10.9 0.5 9.00 4.50 0.34 1.13 1-8 18.5 NA 12 10.5 3.5 21.00 1.03 12.3 4.08 3.32 18.30 11.51 1.41 3.5 10.3 14.00 10 Pressure (psig) 150 125 100 48" BFV 5 50 25 0 0 50 100 150 200 250 Temperature ( F) 2"-42" BFV 14"-24" BFV 1 30.23 15.1 12.25 0.88 9.00 4.50 0.34 1.13 1-8 21.25 NA 1 10.81 4.13 23.50 1.03 14.9 4.4 39.50 19.5 11.51 1.88 3.5 10.3 14.00 132 13 18 32.18 1.8 13.40 0.81 8.50 4.25 0.41 1.25 20 34.8 1. 14.39 1.0 11.50 5.5 0.41 1.25 24 40.9 20. 1.28 1.25 11.00 5.50 0.53 1.38 2 43.03 21.83 18.45 1.25 11.3 5.9 0.53 1.38 30 48. 25.03 20.3 1.38 12.00.00 0.53 1.38 3 55.8 28.8 24.00 1.25 13.50.5 0.53 1.2 1-1/8-1-1/8-1-1/2-42 2.58 32.21 2.38 1.25 1.00 8.00 0.53 1.2 1-1/2-48 4.80 39.88 32.00 2.00 18.00 9.00 0.8 1.2 1-1/2 - All dimensions are in inches unless otherwise noted. 22.5 25.00 29.50 31.5 3.00 42.5 1-1/8 - x 1.0 1-1/8 - x 1.0 x 1.25 x 1.25 x 1.25 1-1/2 - x 1.5 49.50 1-1/2 - x 1.5 5.00 1-1/2 - x 1.5 1 10.48 4.3 25.00 1.41 1.00 4.9 41.43 20.90 11.51 19.03 3.5 10.3 14.00 145 1 20 13.13 5.12 2.50 1.811 18.8 5.54 48.5 25.04 13.98 22.4 5.13 13.98 18.00 18 24 20 13.0.19 32.00 1.811 22.1.1 54.55 29.10 14.02 25.23 5.13 13.3 18.00 281 343 24 14.43.38 34.25 1.811 24.3.80 5.89 29.10 14.01 2.0 5.5 13.2 18.00 383 449 28 1.5.50 38.5 2.15 28.81.0.19 31.2 21.1 31.5 5.5 1.0 24.00 595 04 32 23.03.88 4.00 2.953 34. 8.44 4.19 35.00 20.81 35.19 5.5 19.30 24.00 893 1100 3 23.03 9.8 53.00 2.953 40.41 10.24 83.94 38.3 22.44 38.5.50 22.30 30.00 1105 134 44 22.14 10.88 58.50 4.25 4.30 11.44 100.00 4.00 22.0 4.00 12.0 23.92 3.00 1950 2225 www.nilcor.com Ph. 1-554-3100 Fax 1-554-523
Manual Operator Options Lever Epoxy Coated Cast Ductile Iron Construction Gear Standard Aluminum Body 3-12 Cast Steel 14-48 Automation and Control Nil-Cor automated on/off valves feature our exclusive low profile molded composite mounting bracket and stainless steel hardware. ISO 5211 Mounting Pad (3-12 only) Pneumatic/Electric/Hydraulic ON/OFF Modulating Control Chain Furnished with Zinc Plated Carbon Steel Attachment Sets Shaft Extensions Design A: Utilizes an inner shaft and outer torque tube. This style allows the valve actuator to be located away from the valve in a cleaner, more friendly environment. The inner tube delivers the actuator torque to the valve stem, while the outer tube carries the reaction into the valve body. The torsional deflection under full load is held to 1.0 degree or less to ensure accurate positioning of the valve disc in the seat for tight shutoff. Design B: Used primarily for gear-operated valves in hard to reach but relatively clean environments. The gear itself is located on the valve and the gear input shaft is extended to a convenient location. By eliminating the outer torque tube, weight and cost are reduced. The travel stops in the gear provide precise positioning of the valve disc regardless of the amount of windup in the input shaft. Characteristic Curve Percent Capacity Percent of Travel 4855 Broadmoor Ave. Kentwood, MI. 49512 Ph. 1-554-3100 Fax 1-554-523 www.nilcor.com Catalog 310-05-1 NIL-COR LLC INFORMATION IS BASED ON TECHNICAL DATA AND TESTING THAT NIL-COR BELIEVES TO BE RELIABLE AND IS SUBJECT TO CHANGE WITHOUT NOTICE. THE INFORMATION IS INTENDED FOR USE BY PERSONS HAVING TECHNICAL SKILL, AT THEIR OWN DISCRETION AND RISK, SINCE CONDITIONS OF PRODUCT ARE OUTSIDE OF NIL-COR S CONTROL. NIL-COR MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AND ASSUMES NO LIABILITY IN CONNECTION WITH ANY USE OF THIS INFORMATION. KYNAR IS A REGISTERED TRADEMARK OF ARKEMA INC. VITON IS A REGISTERED TRADEMARK OF DUPONT PERFORMANCE ELASTOMERS L.L.C. HASTELLOY IS A REGISTERED TRADEMARK OF HAYNES INTERNATIONAL INC.