Reel Mower TRM and TRM Parts Manual Locke Turf 0 Highway E, Opp, Alabama () -00
General Information Mower Layout Please note that Left and Right are determined by standing at eh rear of the mower and facing forward. Mowing units are numbered from to, as shown. Note that reel mowers do not use units & or any of the required mechanisms to attach them. Quantities Quantities shown are for each sub-assembly rather than for the complete mower. Illustration This illustration is to identify the Reel by number. Note: HHCS - Hex Head Cap Screw CB - Carriage Bolt
TRM-0 Reel Mower Alphabetical Index Note: All parts that are available for repair parts are not listed n this index. Check parts listed to find unlisted parts that attach or are work in relation to listed parts. Description Section Mainframe & related Parts Shielding Drives, Gearbox, Belts, Driveshaft Wheels, Axles, Hubs Hydraulics Mowing Units Backlapper Decals Parts Description Page No. Axle Assy. - Transport - Backlapper Assy. - Bearing - Reel - Belt - V-Belt - Binder and Chain Kit - Brace - Tongue - Bracket - Roller Mount - Bushing - Roller Adapter - Chains - Lift (TRM- -Gang) - Chains - Lift (TRM- -Gang) - Compensator, Dual # to # and # to # - Compensator, Single # - Cutting Units -, - Cylinder, Hydraulic - Damper Assy. (TRM- Gang - Decal Kit -, - Driveshaft - Input CV Tractor to Implement - Equalizer (TRM- -Gang) - Equalizer (TRM- -Gang) - Fittings - Hydraulic - Gearbox & Related Parts - Hitch - Ball Type - Hitch - Swivel - Hose Holder - Hose - Hydraulic - Housing - Reel Bearing - Hub Assy. - Transport - Idler Assy. - Belt - Jackshaft Assy. - Front - Jackshaft Assy. - Rear - Jackstand - Lift Arms - (TRM-) - Lift Arms - (TRM-) - Lift, Wing - Mainframe (TRM- -Gang) - Mainframe (TRM- -Gang) - Roller Assemblies - Seal Kit - Hydraulic Cylinder - Sheaves - From Gearbox - Shields - Driveshaft & Gearbox - Shields - LH / RH Drive Guards - Shield - V-Belt Guard - Stabilizer Arm - Telescoping Arm - Tie Rod Assy. Compensator - Toe Guard - Tongue - Track Removal Brush -,- Wheel Assy. -
0 0 Main Frame TVM- Reel Mower 000 Mainframe 00 Tongue w/ Decals 00 Swivel Hitch 00 Tongue Brace, RH 00 Tongue Brace, LH 0 HHCS / - x -/ G 0 Lockwasher / 00 Hex Nut / 0 HHCS / - x G 0 0 Hex Nut - Nylock / - 00 Stud, Belt Guard 00 Spacer, RH Shield 00 Nut, Coupling / - x -/ Lg 000 Jam Nut / - 00 Ball Hitch Assembly 000 Jackstand Assembly 00 Hose Holder Assembly 0 HHCS / - x -/ G Hex Nut - Nylock / - 0 000 Warning Decal 000 Notice Decal 000 Flag Decal 0000 Warning Decal 000 Danger Decal 00 HHCS / - x / Flatwasher / 0 Safety Tow Chain -
0 0 0 Main Frame TRM- Reel Mower 000 Mainframe 00 Tongue w/ Decals 00 Swivel Hitch 00 Tongue Brace, RH 00 Tongue Brace, LH 0 HHCS / - x -/ G 0 Lockwasher / 00 Hex Nut / 0 HHCS / - x G 0 0 Hex Nut / 00 Stud, Belt Guard 00 Spacer, RH Shield 00 Nut, Coupling / - x -/ 000 Jam Nut / - 00 Ball Hitch Assembly 000 Jackstand Assembly 00 Hose Holder Assembly 0 HHCS / - x -/ G Hex Nut, Nylock / - 0 0000 Rubber Bumper Flatwasher / 00 HHCS / - x G 00 Outer Tie Rod Assembly 00 Outer Tie Rod Tube 000 Rod End RH / -M x / B 00 Rod End LH / -M x / B Hex Nut / RH 0 Hex Nut / LH 00 HHCS / - x -/ G Lockwasher / 00 Tie Rod Spacer 0 Hex Nut / - G 000 Caution Decal 000 Notice Decal 000 Flag Decal 0000 Warning Decal 000 Danger Decal 00 HHCS / - x / Flatwasher / 0 Safety Tow Chain -
0 0 TRM- Equalizer and Lift Arm Assembly 0 00 Lift Arm ( Gang) RH 00 Lift Arm ( Gang) LH 00 Bearing Cup Assembly 00 Synchronizing Rod 00 Rod End RH / - / B Washer / 0 Jam Nut / - 0 HHCS / -0 x 00 Spacer 0 Hex Nut / -0 00 Clevis Pin x -/ Presto Pin / Clevis Pin / x -/ Cotter Pin / x HHCS / - x -/ Flatwasher / 000 Jam Nut / - 00 Clevis Yoke w/ Hole 00 Clevis Yoke 0 00 Hex Nut / - 00 Transport Lock Chain 00 Lift Chain # 00 Lift Chain # & # Outer 000 Lift Chain # & # Inner 00 Lift Chain # & # Outer 000 Polly Strap 0000 Polly Strap Hex Nut, Nylock / -0 HHCS / -0 x -/ Flatwasher / 0 00 Lift Chain # & # Inner -
0 0 TRM- Equalizer and Lift Arm Assembly 0 000 Lift Arm ( Gang) RH 000 Lift Arm ( Gang) LH 00 Bearing Cup Assembly 00 Synchronizing Rod 00 Rod End RH / - / B Washer / 0 Jam Nut / - 0 HHCS / -0 x 00 Spacer 0 Hex Nut / -0 00 Clevis Pin x -/ Presto Pin / Clevis Pin / x -/ Cotter Pin / x HHCS / - x -/ Flatwasher / 000 Jam Nut / - 00 Clevis Yoke w/ Hole 00 Clevis Yoke 0 00 Hex Nut / - 00 Transport Lock Chain 00 Lift Chain # 00 Lift Chain # & # Outer 000 Lift Chain # & # Inner 00 Lift Chain # & # Outer 000 Polly Strap 0000 Polly Strap Hex Nut, Nylock / -0 HHCS / -0 x -/ Flatwasher / 0 00 Lift Chain # & # Inner -
0 Single Compensator and Tie Rod Assemblies Reel Unit No. 000 Tie Rod Hex Nut / - UNF RH Thd 0 Hex Nut / - UNF LH Thd 000 Rod End / Bore w/rh Thread / - 00 Rod End / Bore w/lh Thread / - 000 Compensator Spring / 000 Spacer / Thick HHCS / - x -/ Gr. Lockwasher / Hex Nut / - 0 HHCS / - x Gr. 0 00 Tie Rod Spacer 00 Tie Rod Assy. 00 Spacer / Thick -
0 Dual Compensator and Tie Rod Assemblies Reel Units to & to 000 Tie Rod Hex Nut / - UNF RH Thd 0 Hex Nut / - UNF LH Thd 000 Rod End / Bore w/rh Thread / - 00 Rod End / Bore w/lh Thread / - 000 Compensator Spring / 000 Spacer / Thick HHCS / - x -/ Gr. Lockwasher / Hex Nut / - 0 HHCS / - x Gr. 0 00 Tie Rod Spacer 00 Tie Rod Assy. -
0 0 Primary Guards 00 Guard w/decals - Driveshaft 000 Danger Decal 000 Decal - Notice to Owner 000 Danger Decal (Spanish) 00 R.H. Drive Guard 00 L.H. Drive Guard 0000 Model Decal TVM-0 0000 Model Decal TVM-0 0 Lockwasher / HHCS / - x / Gr. 0 00 HHCS / - x Gr. Flatwasher / 00 HHCS / - x / Lockwasher / 0 Flatwasher / 00 HHCS / - x / -
Right Side V-Belt Guards TRM- Forward Left Side 00 Guard, Center Rear # 00 Guard, LH Outside # 00 Guard, RH Outside # 00 HHCS / - x / 0 Lockwasher / 0 Flatwasher / 000 HHCS / -0 x / 0 Lockwasher / Flatwasher / Right Side V-Belt Guards TRM- Forward Left Side 0 00 Guard, Center Rear # 00 Guard, LH Outside # 00 Guard, RH Outside # 00 HHCS / - x / 0 Lockwasher / 0 Flatwasher / 000 HHCS / -0 x / 0 Lockwasher / Flatwasher / 0 00 Guard, LH Outside # 00 Guard, RH Outside # -
0 V-Belt Guards TRM- 000 Gearbox Assy. 00 Vent Plug 00 Spacer, Gearbox 0 Lockwasher / 0 HHCS / - x 000 Pulley, Belt Dia. 000 Bushing, Tapered Split SK -/ 000 Pulley, Belt Dia. 000 Bushing, Tapered Split SDS -/ 0 Key 000 V - Belt B- 000 V - Belt B-0 -
,,,,,, 0 0,,,,,, 000 Gearbox Assembly TVM-0 Manufactured by Comer 0 Oil Plug / 00 Oil Seal x x 0mm 0 Snap Ring UNI 0 Shim 0. x. x 0 Bearing 00 00 Bolt M x Gr.. 00 Pinion Z M. 00 Cover 00 Locknut M x. 0 00 Shaft 00 Spring Washer 000 Crown Wheel Z M. 0 Shim. x x. 00 Spacer 0 Shim. x x. 00 Shaft -/ 0 Snap Ring F00 Plug / 00 Casing 0 00 Oil Level Plug 0 Shim 0. x. x. 00 Shim 0. x. x. 0 Shim 0. x. x. 0 Shim. x x. 00 Shim. x x. -
0 0 000 P.T.O. Shaft and Parts 00 Half Shaft, Outer 00 CV Joint Assembly 00 Roll Pin mm x mm 00 Outer Tube 000 Half Shaft, Inner 00 Inner Tube 00 Roll Pin mm x mm 00 Yoke, Inner Tube Cross Bearing Kit 0 00 Yoke, Implement End 00 Wide Angle Shield 00 Bearing, Soft Cone 00 Screw, Self Tapping 00 Bearing, Shield Tube Outer 00 Lock Pin 00 Outer Half Shaft Shield 00 Bearing, Shield Tube, Inner 000 Inner Half Shaft Shield 00 Complete Shield 0 00 Safety Chain 0 Danger Decal Danger Decal -
Front Jackshaft Assembly TVM-0 & TVM-0 000 Pulley Belt.PD 000 Bushing Split Taper SDS Key 000 Bearing Hole Flange HHCS / - x -/ Gr. Lockwasher / Pulley Belt. PD 000 Bushing Split Taper SH 0 Key x / 0 00 Front Jackshaft 00 Hex Nut / - Gr. -
0 Rear Jackshaft Assembly 00 RH Rear Jackshaft 00 LH Rear Jackshaft 000 Pulley, Belt. PD 000 Bushing, Split Taper SH 0 Key x / 00 Pulley, Belt. PD 00 Bushing, Split Taper SD 00 Key 00 Jackshaft Coupling Assy. 0 00 HHCS - - x -/ 00 Key Hex Nut, Nylock / - 000 Bearing, Bolt Flange HHCS / - x -/ Lockwasher / 00 Hex Nut / - -
Belt Idler Assembly 00 Idler Shell -/ 00 Idler Shell 000 Bearing, ID x mm OD 00 Bushing OD x Flatwasher / Nylock Hex Nut / - 0 HHCS / - x Gr. 00 Belt Drive Idler Assy. -/ 00 Belt Drive Idler Assy. -
0 Wheel, Axle and Hub Assembly 00 Axle 0 000 Tire, x. x (Ribbed) TVM-0 00 Tire, x. x (Highway) TVM-0 00 Tire, x. x (Ribbed) TVM-0 00 Wheel x - Bolt, TVM-0 00 Wheel x -/, Bolt, TVM-0 00 Seal 0 Wheel Stud / -0 x -/ 00 Hub w/ Cups 0 Bearing Cup L0 Bearing Cone L 0 Castle Nut / - 0 00 Keyed Washer / 0 Cotter Pin / x -/ 00 Dust Cap 00 Valve Stem 00 Ribbed Tire & Wheel Assy. TVM-0 000 Highway Tire & Wheel Assy. TVM-0 00 Highway Tire & Wheel Assy. TVM-0 Lug Nut, / -0 UNF 000 Hub Assy. -
0 Hydraulic System TVM-0 00 Hydraulic Cylinder -/ Bore x 0 Stroke x Rod Dia. W/ Decal 000 Seal repair Kit for 00 Hydraulic Cylinder 000 AD / NPTF x / NPTM / ORFC 000 Elbow / NPTF x / NPTM 00 Hose Assembly / NPTM ends 00 Check Valve 00 AD / NPTM Close Nipple 00 TE / NPTF Adaptor Tee 000 Hose Assembly 0 000 QD Adaptor 0 0000 AD / NPTM x / NPTF 00 Check Valve Assy. 000 Caution Decal -
0 Reel Housing Bearing Flange 00 Oil Seal CR Reel Bearing 00 Bearing 00 Reel Adjuster Compression Spring 0 Flatwasher / SAE CP Hex Nut / - Jam Nut / - Adjustment Screw / NF x G 000 Jam Nut / - 00 Grease Fitting Extended / -0 0 00 Bearing Housing, Reel Bearing 00 Pivot Bushing Flatwasher / 00 Reel Housing Pivot Bolt / - 00 Reel Idler, End Spacer Lockwasher / External 0 Jam Nut / - 00 Safety Cup, Reel Shaft Lockwasher / External 00 HHCS / - x / -
A 0 0 0 0 0 Cutting Unit -
Cutting Unit 00 Reel Frame Unit # 000 Reel Frame Unit # 000 Reel Frame Unit # 00 Reel Frame Unit # 00 Reel Frame Unit # 00 Reel Frame Unit # - Single Roller 00 Reel Frame Unit # - Single Roller 00 Reel Frame Unit # - Double Roller 00 Reel Frame Unit # - Double Roller 00 Reel, Blade 000 Reel, Blade 00 Reel, Blade 00 Reel, Blade 00 Reel, Blade 00 Reel, Blade 00 Smooth Roller Assembly 000 Grooved Roller Assembly 00 Bed Knife Holder (Bed Bar) 00 ARF Low Cut Bedknife Bedknife Screw / - x 0 HHCS / - x Gr HHCS / - x -/ Gr Lockwasher / 0 00 Roller Bracket Assy. LH (& Roller) 00 Roller Bracket Assy. RH (& Roller) 00 Top Shield, Mowing Unit () 00 Top Shield, Mowing Unit (&) 00 Top Shield, Mowing Unit () 00 Top Shield, Mowing Unit () Hex Nut, Nylock / - 00 HHCS / - x / 0 Lockwasher / 0 Flatwasher / HHCS / - x -/ - Roller HHCS / - x -/ - Roller 00 Pulley Scraper, RH (#,,) 00 Pulley Scraper, LH (#,) 00 Hex Nut / - Gr 00 Nylon Roller 0 00 Set Collar 00 HHCS / - x Gr Lockwasher / 00 Retaining Ring -/ Internal 00 Drive Sheave - Reel A 00 Shaft Extension for Reels & (TRM-) 0 Square Key x 00 Reel Drive Side Spacer Carriage Bolt / - x -/ Hex Nut, Nylock / - 000 Belt - V B Reel Drive 0 00 Skid Shoe, RH 000 Skid Shoe, LH 000 Locke Decal 000 Danger Decal 000 Danger Decal 00 Top Shield Mowing Unit # - Rollers 00 Top Shield Mowing Unit # - Rollers 000 Top Shield Mowing Unit # & - Roller RH A/R Refer to Reel Bearing Housing Flange Parts Breakdown 00 Top Shield Mounting Unit # & - Roller LH 0 Jam Nut / NF CP 0 Star Lockwasher / Ext. -
A A 0 0 0 0 0 0 0 0 Cutting Unit V-Reel -
Cutting Unit V-Reel 00 TRM-V Reel Weldment, 0 Blade 00 TRM-V Reel Weldment, Blade 00 TRM-V Reel Frame Weldment, # 00 TRM-V Reel Frame Weldment, # 00 TRM-V Reel Frame Weldment, # 00 TRM-V Reel Frame Weldment, # 00 TRM-V Reel Frame Weldment, # 00 TRM-V Reel Frame Weldment, # Double Roller 000 TRM-V Reel Frame Weldment, # Double Roller 00 TRM-V Reel Frame Weldment, # Single Roller 00 TRM-V Reel Frame Weldment, # Single Roller 00 Skid Shoe, Left Hand 000 Skid Shoe, Right Hand 00 Bearing Housing 000 Top Shield, TRM-V Reel # 000 Top Shield, TRM-V Reel #, 000 Top Shield, TRM-V Reel # 000 Top Shield, TRM-V Reel # 000 Top Shield, TRM-V Reel # Double 000 Top Shield, TRM-V Reel # Double 00 Top Shield, TRM-V Reel # Single 00 Top Shield, TRM-V Reel # Single 0 Key, / sq. x 00 Sheave. / Bore x.0 PD 00 Bearing, Reel 0 00 Oil Seal 00 Retaining Ring 00 Grease Fitting, / - (Extended) 0 Jam Nut / NF CP 00 Spacer, Drive Side 00 Spacer, Reel End 00 Safety Cup Weldment 000 Rod End, / - Male Right Hand 000 Rod End, High Strength / -0 Male Right Hand 00 Smooth Roller Assembly 000 Grooved Roller Assembly 0 000 Trunion 000 Adjuster Inner Tube 000 Spacer Tube 000 Adjuster Screw Weldment 00 HHCS / x / 0 Lockwasher / CP 0 Flatwasher / USS CP 00 HHCS / x / CP G Lockwasher / CP 0 Flatwasher / SAE CP 0 Hex Nut / NF CP 00 Washer, Fender. ID x. OD 000 Jam Nut / - CP Star Lockwasher / Ext. 00 Spring, Compression Serrated Flange Hex Nut / CP Set Screw / x CP G Set Screw / x -/ CP G 0 Jam Nut / CP NF 0000 V-Reel Decal 0 000 Danger Decal 000 Danger Decal 000 Locke Decal 00 HHCS / x G ZP 0 HHCS / x -/ G ZP 00 Bed Bar Spacer 000 Belt - V B Reel Drive 00 Hex Nut / - G Lockwasher / 00 Pulley Scraper, RH (#,,) 00 Pulley Scraper, LH (#, 0 HHCS / - x -/ Single Roller HHCS / - x -/ Double Roller 00 Roller Bracket Assy. LH (& Roller) 00 Roller Bracket Assy. RH (& Roller) Hex Nut, Nylock / - Carriage Bolt / - x -/ 00 Shaft Extension for Reels & (TRM- Only) 00 Bed Bar Assembly (-) Flat Head Screw / x Hex Nut / CP Nylock 00 Bedknife 000 Bed Bar -
0 Pivoting Arm ( Rollers only Reels &) Toe Guard (Only on Reels &) 000 Pivoting Arm, for Roller Only 0 HHCS / - x Gr 0 Hex Nut, Nylock / - 00 Grease Fitting 0 HHCS / - x -/ 0 Flatwasher / 00000 Brass Bushing 0000 Pivot Bushing Race Lockwasher / 0 000 Jam Nut / - 00 Toe Guard Assembly 0 HHCS / x -/ Flatwasher / 0 Lockwasher / 00 Hex Nut / -
0 Rollers and Roller Brackets 0 0 00 Roller Shaft, Grooved Roller 00 Wear Sleeve 00 Roller, End Grooved Roller 00 Inner Tube, Grooved Roller 0000 A/R Spacer 000 A/R Washer Grease Fitting 0 Jam Nut, / - 000 Bearing Set 0 000 Grease Set 000 Dust Set 000 Roller Shaft, Smooth Roller 000 Roller End, Smooth Roller 000 Inner Tube 000 Outer Tube 000 Bearing Inner Race 00 Thrust Bearing Race - 00 Thrust Bearing 00 Grease Seal, Smooth Roller 0 00 Dust Seal, Smooth Roller 000 Wear Sleeve, Smooth Roller 00 Retaining Ring 00 Bearing, Needle 00 Roller Bracket, RH 000 Roller Bracket, LH 0 Set Screw / - x / 00 Roller Bracket Adjuster 00 Hex Nut / - 000 Adapter Bushing 00 Scraper, Smooth Roller 0 00 Scraper, Grooved Roller Set Screw / x -/ Flanged Hex Nut / Hex Nut /
Double Roller Mowers 0 0 0 0 Stabilizer Arm and Telescoping Arm Single Roller Mowers 0 000 Telescoping Arm, Shaft Assy. 00 Pivot Bolt / -0 Lockwasher / Hex Nut / -0 000 Pinch Clamp -/ x -/ 00 Telescoping Arm Sleeve 000 Telescoping Arm Spring 00 Chain, Safety 00 HHCS / - x -/ G 0 0 Flatwasher / Hex Nut / - Grease Fitting / - 000 Rod End RH / - Jam Nut / - 00 Stabilizer Arm RH (Dbl Roller) 00 Stabilizer Arm LH (Dbl Roller) 00 Telescoping Arm, Single Roller 00 Telescoping Arm, Stay Rod 00 HHCS / - x G A/R Flatwasher / 0 Hex Nut Nylock / - 00 Pivot Bushing (Dbl. Roller) -
0 0 00 Backlapper Assembly 000 Coupling - Pump -/ Spl x Bore 00 Tractor Mt. Backlapper Input Shaft 00 Woodruff Key #0 / x 00 Snap Ring Ext 00-. Shaft 00 Bearing 00-RSNR 0 x x mm HHCS / -0 x -/ Gr 00 Stop, Tractor Drawbar 0000 Gear ( Tooth) 0 Woodruff Key #0 / x / 0 00 Snap Ring Ext.. Shaft 00 Bearing 0-RSNR x x mm 00 Output Shaft Dowel Pin / OD x / Long 00 Backlapper Case 00 Plug / NPT HHCS / -0 x Gr Flatwasher / SAE Hex Nut Nylock / -0 00 Backlapper Case Cover 0 00 Snap Ring Ext.. -
Track Brush 0 B 0 0 0 A -
Track Brush 00 Spacer - Drive Side 00 Spacer 00 Bearing 00 Step Key / x / x / 00 Chain Guard RH (Not Shown) 00 Chain Guard LH (Shown) 000 Rod End / Bore RH Thread 00 Brush Assy. A 00 Stabilizer Arm for RH Double Roller (Not Shown) 00 Stabilizer Arm for LH Double Roller (Shown) B 00 Stay Rod Weld. (Single Roller) 000 Roller Chain #0 0 Key, Square / x / 00 Side Plate 00 Spacer, Tie Rod 00 Spacer 00 Shield Disc 00 Spacer 00 Spacer 0 HHCS / x -/ Gr 00 HHCS / x Gr 0 HHCS / x -/ Gr 0 HHCS / x -/ Gr Carriage Bolt / x Gr 0 Carriage Bolt / -/ Gr HHCS / x -/ Gr Carriage Bolt / x -/ Gr Hex Nut / 00 Hex Nut / 0 Hex Nut / Hex Nut, Nylock / 0 Lockwasher / 0 0 Flatwasher / 0 Flatwasher / Lockwasher / 0 Lockwasher / Flatwasher / 00 Compensator Spring 0000 Sprocket 0B - Bore 00 Sprocket 0B / Bore 00 Connector Link 000 Master Link #0 0 00 Flangette 00 Mount Bracket 00 HHCS - x Gr -
00 Chain and Binder Kit 00 Binder Assembly Load Binder Hook 0000 Chain Weldment -
Decals Part Qty Description No. No. Model Decal (TRM ) 000 Caution Decal (0 RPM, Gearbox 000 Danger Decal (PTO Shield) 000 Locke Decal 000 Danger Decal (Tongue) 000 Decal, Flag (Tongue) 0000 Warning Decal (Tongue) 000 Warning Decal (Tongue) 000 Danger Decal (PTO Shield) 000 Warning Decal (Tongue) 000 Notice Decal (PTO Shield) 000 Danger Decal (Reel Head Shield) 000 Caution Decal (Frame & Tire) 000 0 Danger Decal (Frame & Tire) 000 Caution Decal (Cylinder) 000 Notice Decal (Tongue) 000 Caution Decal (Frame & Tire) 00 Red Reflector Amber Reflector Part Qty Description No. No. Model Decal (TRM ) 000 Caution Decal (0 RPM, Gearbox 000 Danger Decal (PTO Shield) 000 Locke Decal 000 Danger Decal (Tongue) 000 Decal, Flag (Tongue) 0000 Warning Decal (Tongue) 000 Warning Decal (Tongue) 000 Danger Decal (PTO Shield) 000 Warning Decal (Tongue) 000 Notice Decal (PTO Shield) 000 Danger Decal (Reel Head Shield) 000 Caution Decal (Frame & Tire) 000 0 Danger Decal (Frame & Tire) 000 Caution Decal (Cylinder) 000 Notice Decal (Tongue) 000 Caution Decal (Frame & Tire) 00 Red Reflector Amber Reflector CAUTION To avoid injury or Machine Damage: Operate only with 0 rpm PTO DANGER ROTATING DRIVELINE CONTACT CAN CAUSE DEATH KEEP AWAY DO NOT OPERATE WITHOUT All driveline guards, tractor and equipment shields in place Drivelines securely attached at both ends Driveline guards that turn freely on diveline DANGER ROTATING DRIVELINE HAZARD Shield Missing Do Not Operate -
DANGER THROWN OBJECT HAZARD To prevent serious injury or death from thrown objects: Operate with all guards installed in good condition. Stop operation if bystanders come within several hundred feet. 000 WARNING EXCESSIVE POINT ORSPEED G HAZARD s injury or death crushing: implement while Raising Lowering To Prevent Serious Injury or Death: Do Not Exceed 0 mph maximum transport speed. Loss of vehicle control and/or machine damage can result 0000 000 NOTICE To prevent damage to reel units and / or uneven cutting: Keep frame level 000 DANGER ROTATING BLADES-KEEP AWAY To prevent serious injury or death from rotating reel blade contact. Never allow riders, especially children on tractor. Keep bystanders away from mowing area. Keep guards on machine. Keep hands, feet, hair and clothing away from moving parts. CAUTION To Avoid Injury or Machine Damage from Improper Tire Inflation or Torquing of Wheel Bolts: Maximum inflation pressure of tires is psi. Torque wheel bolts to lb-ft. 000 000 WARNING To Prevent serious injury or death: Si no lee ingles, pida ayuda a alguien que si lo lea para que le taduzca las medidas de seguridad. Read and understand Operator's Manual before using. Do not permit riders on the tractor or mower. Never carry child on tractor seat. Operate with guards installed and in good condition. Operate only with tractor equipped with ROPS and seat belts. Keep away from moving parts. NOTICE TO OWNER An OPERATOR'S MANUAL and a WARRANTY REGISTRATION were attached to this implement during final inspection at the factory. If they were not attached at the time of purchase, please contact your selling dealer at once. CAUTION To Avoid Injury or Machine Damage from Improper Tire Inflation or Torquing of Wheel Bolts: Maximum inflation pressure of tires is psi. 000 Torque wheel bolts to lb-ft. 000 Red Reflector Locked CAUTION Use chain to lock Unlocked Stop engine, set brake and wait for all moving parts to stop before dismounting. Be sure lights and reflectors required by law are clean and in good working order before transporting. Do not allow children to operate mower. Clean debris from mowing area.. Read and understand Manual BEFORE operating the implement.. Complete, sign and mail the Warranty Registration in today. 000 To prevent injury or damage to mower from Hydraulic Failures: Lock folding arms before transport. Unlock folding arms before operation. Do not operate in the raised position. Support securely before working beneath unit. Review safety instructions annually. g 000 Amber Reflector Red Reflector y PELIGRO Si No Lee Ingles, Pida Ayuda a Alquien Que Si Lo Lea Para Que le Traduzca las Medidas si Seqyridad - 000 WARNING CAUTION To avoid injury or Machine Damage: Operate only with 0 rpm PTO HIGH PRESSURE 000 FLUID HAZARD 000 To prevent serious injury or death from escaping hydraulic fluid: Visually check all hydraulic lines and hoses BEFORE applying pressure. Relieve pressure on system before repairing, adjusting or disconnecting. Use paper or cardboard, Not BODY PARTS, to check for suspected leaks. 000
Locke Turf 0 Highway E, Opp, Alabama () -00