Hammond Electronic Rack Packaging

Hammond Electronic Rack Packaging 195 1 4-20 spring loaded nuts and 0.62 round head slotted bolts and washers for C channels. Description Net Price l 1421S Pkg. of 4 $14.82 CABLE ORGANIZING RING PANELS Five steel rings welded to a folded (for extra strength) 19 rack panel. Rings extend 3.5 from panel front. Rugged textured black powder paint finish. Mounting hardware not included, please order separately. Panel Height Inches Units Net Price l PCMBS19001BK1 1.75 1 $43.49 l PCMBS19003BK1 3.50 2 48.07 FRONT VIEW 3 8 16 spring loaded nuts and 0.75 hex head bolts and washers for C channels (used in racks with Amhal strut rail mounting). Description Net Price l 1463S Pkg. of 3 $22.80 REAR VIEW CABLE ORGANIZING METAL FINGER PANELS 19 rack mount. Snap open, hinged rear door. Rack mount side has five slotted openings. Extends 3 (not including snap buttons) into rack depth. Rugged textured black powder paint finish. Mounting hardware not included, please order separately. Panel Height Inches Units Net Price l PCMDS19001BK1 1.75 1 $83.56 l PCMDS19003BK1 3.50 2 96.71 l PCMDS19005BK1 5.25 3 162.51 RACK INTAKE BLOWERS Standard 19 rack mount. Each unit contains a quadruplex centrifugal blower, powered by a single precision ball-bearing motor. Air delivery from more than 50% of their 17 width. Internal neoprene isolation mounts reduce transmission of vibration to the rack. Air intake only, to pressurize the rack with filtered air. Heavy steel construction. Attractive 19 stainless steel grill included. 115 VAC, 50/60 Hz, motor is UR/CSA listed, ball bearing type, cooled by incoming air. Includes permanent filter. Comes with 6 STJW 3-wire cord. Free Flow Air Delivery Ambient Temp Panel Height (CFM) (F) Inches Units Net Price l KP350A 150 20 to +250 3.50 2 $574.16 l KP529A 300 20 to +250 5.25 3 600.65 l KP729A 470 20 to +250 7.00 4 870.09 HINGED CABLE GUIDE Mounts to standard 19 rack rails. Steel construction. Includes mounting hardware & tie wraps. Rugged textured black powder paint finish. Panel Height Inches Units Net Price l CGUIDE 3.50 2 $91.76 919

Comair Rotron Fans 417 MALTESE TUBEAXIAL AC FAN 6.75 q 5.92 ROUND METAL VENTURI Size: 6.75 5.92 2.165 deep (171.5mm 150.4mm 55mm). Air Flow: 300 CFM (141 L/sec). Operating Voltage: 115 & 230 (50/60 Hz). Operating Temperature: 10 C to +70 C. Feathered Edge for Lower Noise. Venturi: single piece die cast aluminum, black. Weight: 2.25 lb (1.02 Kg). UL Recognized - File E31293. CSA Certified - File L52898. TUV Approved - File R97229. Locked Rotor RPM CFM L/Sec. dba 031842.330/.360.820/.800 2850/3400 250/300 118/141.5 54.8/56.5 031844.200/.180.420/.360 2850/3400 250/300 118/141.5 54.8/56.5 Bearing Nominal Model Type VAC Hz Watts 1-9 10-24 25-Up 031842 MA2B3 Ball 115 50/60 40.5/41.4 $101.01 $91.92 $84.34 031844 MA77B3 Ball 230 50/60 40.5/41.4 101.01 91.92 84.34 WHISPER XL TUBEAXIAL DC FAN 4.69 SQUARE METAL VENTURI Size: 4.69 square 1.54 deep (119.1mm 39.1mm). 55 to 85 CFM (26.0 to 40.1 L/Sec.). 12, 24 VDC (Nominal). Feathered Edge blades for low noise. Venturi: One piece die-cast zinc alloy, black. Weight: 21.5 oz. (.61 Kg.). Operating temperature range: 10 C to +70 C. UL Yellow Card Recognized and CSA Certified. Meets FCC and VDE, EMI requirements. Fan comes with 12 lead wires. Inrush RPM CFM L/Sec. dba 030715 200 660 660 2230 75 35.4 39.4 030717 100 310 310 2230 75 35.4 39.4 030723 100 330 330 1635 55 26.0 30.3 Model Bearing Nominal Range Type VDC VDC Watts 1-9 10-24 25-49 50-Up 030715 WD12C3 Ball 12 6-14 2.4 $56.74 $51.63 $47.38 $44.54 030717 WD24C3 Ball 24 12-28 2.4 56.74 51.63 47.38 44.54 030723 WD12M3 Ball 12 6-14 1.2 56.74 51.63 47.38 44.54 MAJOR (QUIET) BRUSHLESS DC FAN 6.75 q 5.92 ROUND METAL VENTURI Size: 6.75 5.92 2.00 deep (171.5 mm 150.4 50.8 mm). 100 to 260 CFM (47.2 to 123 L/Sec.). 12, 24 and 48 VDC (Nominal). Feathered Edge for lower noise. Venturi: Single piece, die-cast aluminum, black. Electric locked rotor protection. Automatic restart capability. Polarity protected. Weight: 1.84 lbs. (.84 Kg.). Operating temperature range: 10 C to +70 C. UL Recognized and CSA Certified. Meets FCC and VDE, EMI requirements. RPM CFM L/Sec. dba 031090 850 1500 3500 235 111 54.3 031091 420 700 3500 235 111 54.3 031092 1215 2700 3000 200 95 49.0 031093 660 1500 3150 210 99 49.0 Model Bearing Nominal Range Type VDC VDC Watts 1-9 10-24 25-49 50-Up 031090 JQ24B4 Ball 24 19-28 20.3 $94.40 $85.90 $78.82 $74.10 031091 JQ48B4 Ball 48 24-56 20.1 94.40 85.90 78.82 74.10 031092 JQ12C4 Ball 12 9-14 14.6 96.64 87.94 80.69 75.86 031093 JQ24C4 Ball 24 12-28 15.7 94.40 85.90 78.82 74.10 SPINNAKER BRUSHLESS DC BLOWER 6.37 SQUARE PLASTIC VENTURI WITH METAL BACKPLATE Size: 6.37 square 1.60 deep (161.8mm 40.6mm). 29 to 68 CFM (14 to 32 L/Sec.). 24 VDC. Low noise level. Housing and Impeller: polycarbonate, black, meets UL94V-0 flammability rating. Electric locked rotor protection. Automatic restart capability. Polarity protected. Weight: 2.1 lbs. (.953 Kg.). Operating temperature range: 10 C to +70 C. UL Recognized and CSA Certified. Meets FCC and VDE, EMI requirements. Inrush RPM CFM L/Sec. dba 032183 1300 1800 2000 2500 60 28.3 57.0 Model Bearing Nominal Range Type VDC VDC Watts 1-9 10-24 25-49 50-Up 032183 SPD24B1 Ball 24 12-28 30 $91.90 $83.63 $76.74 $72.14 1403

Comair Rotron Fans 417 MUFFIN BRUSHLESS DC FAN 4.73 SQUARE PLASTIC VENTURI Size: 4.73 square 1.26 deep (120mm 32.0mm). 50 to 112 CFM (24 to 48.1 L/Sec.). 4.125 mounting hole centers. 12, 24 or 48 VDC (Nominal). Low noise level. Venturi: Glass filled nylon, black, meeting UL94V-0 flammability rating. Electronic locked rotor protection. Polarity protected. Weight: 8.5 oz. (.24Kg.). Operating temperature range: 10 C to +70 C. UL Yellow Card Recognized and CSA Certified. Meets FCC and VDE, EMI Requirements. Fan comes with 12 lead wires. BISCUIT BRUSHLESS DC BLOWER 4.75 SQUARE PLASTIC VENTURI Size: 4.75 square 1.22 deep (120.7mm 31.0mm). 18 to 28 CFM (8.5 to 13.2 L/Sec.). 12 and 24 VDC (Nominal). Low noise level. Housing: Mineral filled nylon, black, meeting UL94V-0 flammability rating. Operating temperature range: 10 C to +70 C. Weight: 10 oz. (.28Kg.). UL Yellow Card Recognized and CSA Certified. Meets FCC and IEC, VDE requirements. Inrush RPM CFM L/Sec. dba 032176 900 1700 1700 3050 25 11.8 51.2 032179 480 850 850 3050 25 11.8 51.2 030619 900 1700 1700 3050 25 11.8 51.2 030621 480 850 850 3050 25 11.8 51.2 Model Bearing Nominal Range Type VDC VDC Watts 1-9 10-24 25-49 50-Up 032176 BD12A3 Sleeve 12 9-14 11 $44.27 $40.28 $36.96 $34.75 032179 BD24A3 Sleeve 24 18-28 11 44.27 40.28 36.96 34.75 030619 BD12B3 Ball 12 9-14 11 51.13 46.53 42.69 40.13 030621 BD24B3 Ball 24 18-28 11 49.76 45.28 41.54 39.06 Locking Rotor Inrush RPM CFM L/Sec. dba 032207 660 1300 1300 3700 102 48 47.8 032208 280 700 700 3700 102 48 47.8 032141 320 640 640 2850 80 38 41.9 032143 170 430 430 2850 80 38 41.9 032140 180 400 400 2150 58 27 39.7 030832 750 2360 2300 3250 91 43 46.4 032489 660 1300 1300 3700 102 48 47.8 030572 280 700 700 3700 102 48 47.8 030573 200 350 350 3700 102 48 47.8 Model Bearing Nominal Range Type VDC VDC Watts 1-9 10-24 25-49 50-Up 032207 MC12A3 Sleeve 12 6-14 7.9 $25.94 $23.60 $21.66 $20.36 032208 MC24A3 Sleeve 24 12-28 6.7 25.94 23.60 21.66 20.36 032141 MC12G3 Sleeve 12 6-14 3.8 26.81 24.40 22.39 21.05 032143 MC24G3 Sleeve 24 12-28 4.0 25.94 23.60 21.66 20.36 032140 MC12E3 Sleeve 12 6-14 2.2 26.81 24.40 22.39 21.05 030832 MC05J3 Sleeve 5 4.5-6 3.8 36.16 32.91 30.20 28.39 032489 MC12B3 Ball 12 6-14 7.9 29.55 26.89 24.68 23.20 030572 MC24B3 Ball 24 12-28 6.7 29.55 26.89 24.68 23.20 030573 MC48B3 Ball 48 22-56 9.6 29.55 26.89 24.68 23.20 MUFFIN XL BRUSHLESS DC FAN 4.69 SQUARE METAL VENTURI Size: 4.69 square 1.54 deep (119.1mm 39.1mm). 40 to 120 CFM (18.9 to 56.6 L/Sec.). 4.125 mounting hole centers. 12, 24 or 48 VDC (Nominal). Feathered Edge blade design for low noise. Venturi: One piece diecast zinc alloy, black. Electronic locked rotor protection. Polarity protected. Weight: 21.5 oz. (.61 Kg.). Operating temperature range: 10 C to +70 C. UL Yellow Card Recognized and CSA Certified. Meets FCC and VDE, EMI requirements. GALAXY MUFFIN GALAXY TUBEAXIAL DC FAN 5.0 SQUARE METAL VENTURI Size: 5.0 square 1.5 deep (127 mm 38.1 mm). 90 to 165 CFM (42 to 77.9 L/Sec.). 12, 24, 48 VDC (Nominal). Feather edge for low noise. Operating Temp.: 10 C to +70 C. Weight: 1 lb. 6 oz. (.62Kg.). High reliability ball bearings. Available with ThermaPro-V. UL Yellow Card Recognized File E31293. CSA Certified. Current RPM CFM L/Sec. 031074 1250 2600 3250 150 71 031075 625 1150 3250 150 71 031076 310 775 3250 150 71 Model Bearing Nominal Range Type VDC VDC Watts 1-9 10-24 25-Up 031074 GL12B4 Ball 12 6-14 15 $63.60 $57.87 $53.10 031075 GL24B4 Ball 24 12-28 15 66.84 60.82 55.81 031076 GL48B4 Ball 48 24-56 15 66.84 60.82 55.81 Locked Rotor Inrush RPM CFM L/Sec. dba WITH 12-INCH LEADWIRES 028865 500 1500 1500 3100 110 51.9 50.0 028866 250 750 750 3100 110 51.9 50.0 028867 125 400 400 3100 110 51.9 50.0 WITH.120 SOLDER TERMINALS 028868 500 1500 1500 3100 110 51.9 50.0 028869 250 750 750 3100 110 51.9 50.0 028870 125 400 400 3100 110 51.9 50.0 Model Bearing Type Nominal VDC Range VDC 1-9 10-24 25-49 50-Up Watts WITH 12-INCH LEADWIRES 028865 MD12B1 Ball 12 6-14 6 $57.11 $51.97 $47.69 $44.83 028866 MD24B1 Ball 24 12-28 6 57.11 51.97 47.69 44.83 028867 MD48B1 Ball 48 24-56 6 57.11 51.97 47.69 44.83 WITH.120 SOLDER TERMINALS 028868 MD12B2 Ball 12 6-14 6 57.11 51.97 47.69 44.83 028869 MD24B2 Ball 24 12-28 6 57.11 51.97 47.69 44.83 028870 MD48B2 Ball 48 24-56 6 57.11 51.97 47.69 44.83 1404

Comair Rotron Fans 417 MUFFIN XL TUBEAXIAL AC FAN 4.69 SQUARE METAL VENTURI Size: 4.69 square 1.54 deep (119.1mm 39.1mm). 108 to 115 CFM (51.0 to 54.3 L/Sec.). 115 to 220/230 VAC, 50/60 Hz. Feathered Edge blades for lower noise. Venturi and Spider: Zinc alloy, black. Weight: 21 oz. (.61 Kg.). Operating temperature range: 28 C to +70 C. UL Recognized and CSA Certified. Meets VDE requirements. BISCUIT AC BLOWER 4.75 SQUARE PLASTIC VENTURI Size: 4.75 square 1.56 deep (120.6mm 39.6mm). 22 CFM (10 L/Sec.). High pressure capability. 115 VAC or 220/230 VAC, 1 phase, 50/60 Hz. Low noise level. Housing: Glass filled polycarbonate, black. Impedance protected. Weight: 18 oz. (.51 Kg.). Operating temperature range: 18 C to +60 C. UL Recognized and CSA Certified. RPM CFM L/Sec. dba 028448.19/.17.22/.20 2500/2700 20/22 9.4/10 48.2/49.6 028449.09/.08.11/.10 2500/2700 20/22 9.4/10 48.2/49.6 028454.19/.17.22/.20 2520/2700 20/22 9.4/10 48.2/49.6 Model Bearing AC Type Volts Hz Watts 1-9 10-24 25-49 50-Up 028448 BT2A1 Sleeve 115 50/60 17/16 $42.40 $38.58 $35.40 $33.28 028449 BT3A1 Sleeve 220/230 50/60 15/14 42.40 38.58 35.40 33.28 028454 BT2B1 Ball 115 50/60 17/16 44.27 40.28 36.96 34.75 RPM CFM L/Sec. dba HIGHER AIR FLOW MUFFIN XL 028316.20/.18.26/.24 2700/3100 98/115 46.3/54.3 47/50 028422.20/.18.26/.18 2700/3100 98/115 46.3/54.3 50.7/51.8 028324.10/.09.14/.12 2700/3100 98/115 46.3/54.3 47/50 028423.10/.09.14/.12 2700/3100 98/115 46.3/54.3 50.7/51.8 REVERSE AIR FLOW MUFFIN XL* 028318.20/.18.26/.24 2700/3100 92/108 43.4/51.0 43.7/46.4 028420.20/.18.26/.24 2700/3100 92/108 43.4/51.0 43.7/46.4 028326.10/.09.14/.12 2700/3100 92/108 43.4/51.0 43.7/46.4 *Air in over propeller, exhausts over spider. Model Bearing Type AC Volts Hz Watts 1-9 10-24 25-49 50-Up HIGHER AIR FLOW MUFFIN XL 028316 MX2A3 Sleeve 115 50/60 17/15 $31.93 $29.06 $26.66 $25.06 028422 MX2B3 Ball 115 50/60 17/15 47.14 42.89 39.36 37.00 028324 MX3A3 Sleeve 220/230 50/60 17/15 34.92 31.77 29.15 27.41 028423 MX3B3 Ball 220/230 50/60 17/15 47.14 42.89 39.36 37.00 REVERSE AIR FLOW MUFFIN XL* 028318 MX2A1 Sleeve 115 50/60 17/15 34.29 31.21 28.63 26.92 028420 MX2B1 Ball 115 50/60 17/15 47.14 42.89 39.36 37.00 028326 MX3A1 Sleeve 220/230 50/60 17/16 34.92 31.77 29.15 27.41 *Air in over propeller, exhausts over spider. MUFFIN MUFFIN XL MUFFIN TUBEAXIAL AC FAN 4.71 SQUARE PLASTIC VENTURI Size: 4.71 square 1.50 deep (119.6mm 38.1mm). 105 CFM (29.6 L/Sec.). 115 or 220/230 VAC, 50/60 Hz. Low noise level. Venturi: Flame retardant, black phenolic, zinc alloy spiders. Weight: 17.2 oz. (.49 Kg.). Operating temperature range: 28 C to +70 C. UL Recognized and CSA Certified. RPM CFM L/Sec. dba STANDARD VOLTAGE MUFFIN VENTURI TYPE 028021.19/.16.26/.24 2650/3100 88/105 41.5/49.6 40.2/43.4 028027.19/.16.26/.24 2650/3100 88/105 41.5/49.6 40.9/45.1 028023.10/.09.14/.12 2650/3100 88/105 41.5/49.6 40.2/43.4 028029.10/.09.14/.12 2650/3100 88/105 41.5/49.6 40.9/45.1 Model Bearing Type AC Volts Hz Watts 1-9 10-24 25-49 50-Up STANDARD VOLTAGE MUFFIN VENTURI TYPE 028021 MU2A1 Sleeve 115 50/60 15/14 $30.31 $27.58 $25.31 $23.79 028027 MU2B1 Ball 115 50/60 15/14 44.77 40.74 37.38 35.14 028023 MU3A1 Sleeve 220/230 50/60 15/14 30.31 27.58 25.31 23.79 028029 MU3B1 Ball 220/230 50/60 15/14 44.77 40.74 37.38 35.14 CARAVEL TUBEAXIAL DC FAN 10 ROUND METAL VENTURI Size: 10.0 3.50 deep (254mm 89mm). Air Flow: 550 CFM (260 L/sec). Operating Voltage: 12, 24 & 48 vdc. Feathered Edge for Lower Noise. Venturi: single piece die cast aluminum, black. Operating Temperature: 10 C to +70 C. 12 Leadwires: 22 AWG, UL. Weight: 4.4 lb (2.0 Kg). UL Recognized - File E31293. CSA Certified - File L52898. TUV Certified to EN60950. Current Locked Rotor RPM CFM L/Sec. dba 031573 1.200 3.000 1650 550 260 49.1 031767.630 1.500 1650 550 260 49.1 Bearing Nominal Range Model Type VDC VDC Watts 1-9 10-24 25-Up 031573 CD2483 Ball 24 12-28 29.0 $120.46 $109.62 $100.58 031767 CD48B3 Ball 48 24-56 30.2 123.33 112.23 102.98 1405

Comair Rotron Fans 417 MODULAIR MB9100 AC CABINET BLOWER Size: 5.22 high 3.98 deep 19.00 wide (133mm 101mm 483mm). 235 CFM (110 L/Sec.). Designed for use in EIA 19 rack cabinets. Features the performance of three Muffin fans. Includes grille, cleanable air filter and finger guards. 10 year continuous duty at 25 C. Weight: 8 lbs. (3.6 Kg.). WHISPER XL TUBEAXIAL AC FAN 4.69 SQUARE METAL VENTURI Size: 4.69 square 1.54 deep (119.1mm 39.1mm). 50 to 83 CFM (23.5 to 40.0 L/Sec.). 115 or 220/230 VAC, 50/60 Hz. Feathered Edge blades for low noise. Venturi and Spider: Zinc alloy, black. Weight: 21 oz. (.61 Kg.). Operating temperature range: 28 C to +70 C. UL Recognized and CSA Certified. Meets VDE requirements. RPM CFM L/Sec. dba 028778.07/.06.08/.07 1450/1500 48/50 22.5/23.5 29.7/31.2 028322.11/.10.12/.11 1900/2000 65/70 30.7/33.0 33.9/34.5 028858.19/.15.20/.17 2200/2500 70/83 33.0/40.0 34.0/37.1 028860.10/.09.11/.10 2200/2500 70/83 33.0/40.0 34.0/37.1 Watts RPM CFM L/Sec. dba 024475 54/44.66/.54 2700/3100 200/235 95/110 47.9/51.1 Model 024475 MB9100-100 Bearing Type of Fans Volts Hz Sleeve 3 115 50/ 60 1-9 10-24 25-49 50-Up $244.41 $222.41 $204.08 $191.86 Model Bearing AC Type Volts Hz Watts 1-9 10-24 25-49 50-Up 028778 WX2A1 Sleeve 115 50/60 6/6 $34.17 $31.09 $28.53 $26.82 028322 WX2M1 Sleeve 115 50/60 10/9 34.17 31.09 28.53 26.82 028858 WX2H1 Sleeve 115 50/60 15/13 34.17 31.09 28.53 26.82 028860 WX3H1 Sleeve 220/230 50/60 14/13 34.17 31.09 28.53 26.82 MODULAIRx MB 5200 AC CABINET BLOWER 320 CFM (151 L/Sec.). Performance of two Patriot fans. Six years continuous duty at 25 C. Fits EIA 19 rack cabinets. Weight 13 lb. (5.9 Kg). Watts RPM CFM L/Sec. 020099 60/62.54/.52 2830/3350 275/320 130/151 Bearing of Type* Type Fans Volts Hz 1-9 10-Up 020099 100 Ball 2 115 50/60 $364.12 $331.35 NOTE: All figures are nominal free values at sea level. *Distributor item. All specifications subject to change without notice. PATRIOT TUBEAXIAL AC FAN 6.75 ROUND METAL VENTURI Size: 6.75 diameter 2.00 deep (171.5mm 50.8mm). 240 CFM (111 L/Sec.). 115 VAC or 220/230 VAC, 1 phase, 50/60 Hz. Feathered Edge blade design for lower noise. Venturi: Single piece die-cast aluminum, black. Automatic reset thermal protector or impedance protected. Weight: 1.84 lbs. (.84Kg.). Operating temperature range: 10 C to +70 C. UL Recognized and CSA Certified. Meets VDE requirements. RPM CFM L/Sec. dba 028254.27/.26.48/.47 2850/3350 200/235 94/111 50.3/54.0 028312.13/.14.23/.23 2850/3350 200/235 94/111 50.3/54.0 Model Bearing AC Type Volts Hz Watts 1-9 10-24 25-49 50-Up 028254 PT2B3 Ball 115 50/60 30/31 $75.94 $69.11 $63.41 $59.61 028312 PT77B3 Ball 220/230 50/60 26/30 76.32 69.45 63.72 59.91 1408

ebmpapst Fans and Blowers 336 DC MOTORIZED IMPELLER WITH LEAD Radial (360 ) air distribution Vibration-free, low noise operation Excellent space utilization Easy enclosure and mounting requirements Max. ambient temperature: 55 C Blower wheel of fiberglass reinforced plastic Dim. (mm) Volts Watts CFM dba Net Price RER101-36-12-12P 100x36.65 12 13.5 90 69 $145.02 RER101-36-48-2P 100x36.65 48 13.5 90 69 163.85 AC MOTORIZED IMPELLERS Radial (360 ) air distribution 68 to 2575 CFM, efficient air movement Vibration-free, low noise operation Excellent space utilization Easy enclosure and mounting requirements Available in FLO-THRU MODULES Dim. (mm) Volts Watts Hertz CFM dba Max C Net Price BLOWER WHEEL OF FIBERGLASS REINFORCED PLASTIC RER125-19-06 125 35 115 18 50/60 68 65 70 $69.64 RER125-19-56 125 35 230 19 50/60 68 65 60 63.51 RER160-28-06S 176 54 115 46 50/60 161 68 70 106.17 RER160-28-56S 176 54 115 45 50/60 161 68 60 106.17 BACKWARD CURVED PA 6.6 PLASTIC IMPELLER R2S133-AB25-22 133 91 115 40 60 170 60 55 70.89 R2S133-AE17-05 133 91 230 34 60 188 60 50 122.02 R2S175-AB60-38 175 69 115 65 60 224 54 45 71.26 R2S175-AB56-30 175 69 230 60 60 224 54 45 93.09 R2E175-A079-12 175 69 115 75 60 320 67 60 99.57 R2E175-A077-12 175 69 230 90 60 320 67 60 99.57 R2E190-A050-16 190 68.5 115 75 50/60 365 64 55 80.67 R2E190-A026-25 190 68.5 230 75 60 365 64 55 80.12 R2E220-AA44-23 220 71 115 96 50/60 500 71 40 88.72 R2E220-AA40-23 220 71 230 100 60 530 71 40 88.72 R2E225-BE51-09 225 107 115 185 60 756 75 50 192.34 R2E225-BE47-09 225 107 230 185 60 756 75 45 192.34 R2E225-BD92-36 225 107 230 200 60 789 71 60 201.20 R4E225-AC15-18 225 99 115 63 60 410 54 75 149.64 R4E225-AI01-10 225 99 230 45 50/60 310 62 75 171.71 R4E310-AE13-17 318 154 115 155 60 1265 68 60 245.34 R4E310-AE05-17 318 154 230 165 50/60 1265 68 60 245.34 R4E310-AE15-16 318 154 277 155 60 1265 68 60 263.98 BACKWARD CURVED SHEET-STEEL IMPELLER R4E280-AD12-15 280 125 115 105 60 990 67 40 245.22 R4E280-AD08-13 280 125 230 105 50/60 990 67 40 237.92 ALUMINUM BACKWARD CURVED 3D IMPELLER R4E310-A032-11 318 123 115 185 60 1177 66 60 202.90 R4E310-A034-12 318 123 230 170 60 1177 66 60 281.19 R4E310-A012-10 318 123 277 165 60 1177 66 60 307.75 R4E310-AQ13-11 318 154 115 235 60 1413 63 50 320.97 R4E310-AP11-12 318 154 230 160 60 1395 63 50 296.22 R4E310-AQ05-12 318 154 230 235 60 1413 63 50 320.97 R4E310-AP36-10 318 154 277 160 60 1395 63 50 322.84 R4E310-AQ27-10 318 154 277 235 60 1413 63 50 350.15 R4E400-AP15-10 404 193 115 635 60 2575 76 50 521.61 R6E400-AL10-10 400 196 115 360 60 1816 65.1 50 464.62 R4E400-AP17-11 400 196 230 635 60 2575 76 50 521.61 R4E400-AP13-09 400 196 277 635 60 2575 76 50 573.79 R6E400-AL08-09 400 196 277 360 60 1816 65.1 50 511.01 25 to 131 CFM Excellent efficiency Use for pressurizing or evacuating Perfect for spot cooling Mount in any position Hertz 50/60 Blower wheel fiberglass plastic AC FLAT PACKS FLATPAKS - PACKAGED IMPELLERS WITH EXHAUST PORTS Dim. (mm) Volts Watts CFM dba Max C Net Price RL90-18-00 121 sq. 37 115 20 26 60 60 $53.43 RL90-18-50 121 sq. 37 230 20 26 60 60 60.91 RG90-18-06 135 sq. 38 115 22 28 60 65 58.45 RG90-18-56 135 sq. 38 230 22 28 60 65 57.36 RG125-19-06 180 sq. 40 115 19 55 60 80 85.20 RG125-19-56 180 sq. 40 230 19 56 60 80 72.13 RG160-28-06S 220 sq. 56 115 50 131 69 80 139.47 RG160-28-56S 220 sq. 56 230 50 131 69 80 143.90 4 SPEED BLOWER AC DUAL INLET CENTRIFUGAL BLOWERS 120 to 450 CFM, efficient air movement Excellent performance at higher static pressures Good space utilization Motor inside housing for excellent heat dissipation and long life performance Dim (mm) Volts Watts Hertz CFM dba Max C Net Price SHEET-STEEL IMPELLER D2E097-CB11-32* 144 137 115 43 50/60 120 47 60 $158.80 D2E097-CB01-12* 144 137 230 42 50/60 106 47 60 155.31 D2E097-BE11-77* 162 165 115 50 60 156 45 45 157.62 D2E097-BE01-65* 162 165 230 54 50/60 156 47 50 157.62 D2E133-B140-50 171 180 230 110 50/60 180 49 50 218.91 D2E133-AM47-01 171 180 230 200 50/60 300 56 40 224.89 D2E133-AM47-23 171 180 230 200 50/60 300 56 40 201.20 D2E133-DM47-01 204 213 230 195 50/60 353 55 40 224.89 D2E133-DM47-23 204 213 230 195 50/60 353 55 40 233.99 D2E133-DM47-A3 204 213 230 195 50/60 353 55 40 272.34 D2E133-DM67-78 204 213 115 205 60 420 55 40 282.50 D4E146-AA25-34* 206 219 115 128 60 450 55 60 244.28 D4E146-AA07-22* 206 219 230 116 50/60 450 53 60 227.82 *With flange. 1410

ebmpapst Fans and Blowers 336 Dim (mm) Volts Watts Hertz CFM dba Max C Net Price FOUR SPEED, POLYPROPYLENE IMPELLER D2E140-HR97-05 216.4 215.8 230 56 75 100 128 50/60 101 158 212 253 36 46 52 56 40 $133.68 D2E146-HT65-14 220 216 115 193 255 327 455 D2E146-HR93-01 220 216 230 70 84 106 160 *With flange. 50/60 212 318 441 582 50/60 93 124 164 205 50 55 59 63 36 52 58 63 50 203.32 50 176.76 Dimensions Inches (mm) Net Price CABLE HARNESS FOR 4-SPEED BLOWERS 21956-4-1040 11.81 (300) $12.28 21957-4-1040 17.72 (450) 13.09 21958-4-1040 25.60 (650) 14.09 21959-4-1040 39.97 (1000) 15.40 AC SINGLE INLET CENTRIFUGAL BLOWERS 56 to 71 CFM, efficient air movement Excellent performance at higher static pressures Good space utilization Motor inside housing for excellent dissipation and long life performance Dim (mm) Volts Watts Hertz CFM dba Max C Net Price FORWARD CURVED SHEET STEEL IMPELLER G2E085-AA05-21* 117 127 115 28 60 56 57 70 $145.83 G2E085-AA01-05* 117 127 230 28 50/60 56 57 70 145.83 G2E120-AR54-43* 171 207 115 105 60 152 62 60 137.23 G2E120-AR38-43* 171 207 230 90 60 152 62 60 137.23 G2E133-DN77-08 171 207 230 88 50/60 150 65 60 147.50 G2E140-AI28-01* 226 261 230 205 60 282 71 45 272.46 G2E140-AL30-48* 226 261 115 130 60 180 60 40 211.92 G2E140-AL40-48* 226 261 230 145 50/60 180 60 40 203.44 *With flange. RE38 DC MOTORIZED IMPELLERS Radial (360 ) air distribution CFM efficient air movement Vibration-free, low noise operation Excellent space utilization Easy enclosure and mounting requirements R1G90 Dim (mm) Volts Range Watts CFM dba C Max Net Price BLOWER WHEEL OF FIBERGLASS REINFORCED PLASTIC RE38-11-13L 38 16 12 8-15 0.8 1.5 10 90 $19.50 RE38-11-13H 38 16 12 8-15 3.9 3.5 36 90 23.25 RER100-25-12 100 32 12 6-13 4.0 34 47 60 42.71 RER100-25-14 100 32 24 12-28 4.0 34 47 60 65.70 RER125-19-12N 138 35 12 7-15 4.5 65 57 75 70.32 RER125-19-14N 138 35 24 12-28 4.5 65 57 75 70.32 RER160-28-12N 176 54 12 7-14 18 141 68 70 109.83 RER160-28-14N 176 54 24 12-28 18 141 68 70 90.07 IMPELLER MADE OF PLASTIC BAG PA6.6 R1G133-AA17-02 133 60.6 24 16-28 28 212 63 60 196.34 R1G133-AA65-02 133 60.6 48 36-57 28 212 63 60 196.34 R1G133-AB75-20 133 59.5 12 8-14 18 160 63 60 223.27 R1G133-AB41-52 133 59.5 48 36-56 23 202 63 60 196.34 R1G175-AB63-02 175 62 24 16-28 36 330 65 60 201.20 R1G175-AB41-02 175 62 48 36-57 36 330 65 60 201.20 R1G190-AC37-52 190 67.7 24 16-28 80 330 68 60 316.04 R1G190-AB27-02 190 67.7 24 16-28 51 365 68 40 229.07 R1G190-AC11-52 190 67.7 48 36-57 71 321 68 60 316.04 R1G190-AB25-02 190 67.7 48 36-57 51 365 68 40 229.07 R1G220-AB35-52 220 63 24 16-28 100 591 73 60 331.51 R1G220-AB73-52 220 63 48 35-56 100 591 73 60 317.42 R1G225-AF07-52 225 89 24 16-28 100 663 67 60 320.03 R1G225-AF11-52 225 89 48 36-57 95 665 67 60 350.58 R1G250-AQ21-52 250 73 24 16-28 91 712 73 60 403.15 R1G250-AQ37-52 250 73 48 16-28 91 712 73 60 403.15 IMPELLER COMPLETELY MADE OF SHEET ALUMINUM R1G310-AD19-52 318 108 24 16-28 90 1124 64 45 528.22 R1G310-AD33-52 318 108 48 36-57 90 1124 64 45 528.22 R1G310-AD17-11 318 108 48 36-52 120 1236 67 40 537.63 HAVE A QUESTION? CONTACT THE ELECTRO SONIC SALES OFFICE NEAREST TO YOU AT 1-800-56-SONIC 24 to 123 CFM Excellent efficiency Use for pressurizing or evacuating Perfect for spot cooling Mount in any position DC FLAT PACKS Continued on next page... 1411

ebmpapst Fans and Blowers 336 Dim (mm) Volts Range Watts CFM dba C Price Max Net RL90-18-12N 121 121 37 12 7-15 5 24 58 75 $84.23 RL90-18-14N 121 121 37 24 12-28 5 24 58 75 84.23 RG90-18-12N 135 135 38 12 7-15 6 32 55 75 81.75 RG90-18-14N 135 135 38 24 12-28 5.5 32 55 75 81.75 RG125-19-12NM 180 180 40 12 7-15 2 35 48 75 104.48 RG125-19-14NM 180 180 40 24 12-28 2 35 48 75 104.48 RG125-19-12N 180 180 40 12 7-15 5 52 58 75 93.30 RG125-19-14N 180 180 40 24 12-28 5 52 58 75 93.30 RG160-28-12NM 220 220 56 12 7-14 7.5 52 58 70 192.15 RG160-28-14NM 220 220 56 24 12-28 7 82 58 70 153.87 RG160-28-12N 220 220 56 12 7.5-14 21 123 66 70 192.15 RG160-28-14N 220 220 56 24 12-28 20 123 66 70 153.87 Dim. (mm) Volts Range Watts CFM dba Max. C Net Price 255N 25 25 8 5 4.5-5.5 0.4 1.9 15 70 $22.13 255H 25 25 8 5 4.5-5.5 0.6 2.9 28 70 27.75 252N 25 25 8 12 10-14 0.5 1.9 15 70 22.13 DC DUAL INLET CENTRIFUGAL BLOWERS 421 to 548 CFM Excellent heat dissipation and long life performance Dim (mm) V. Range Watts CFM dba Max C Net Price D1G133-AB29-52 170.5 180 215 24 16-28 100 421 62 60 $353.70 D1G133-AB39-52 170.5 180 215 48 36-56 100 421 62 60 356.89 D1G133-DC13-52 203 213 232 24 16-28 105 512 61 60 384.07 D1G133-DC17-52 203 180 232 48 36-56 110 559 62 60 384.07 D1G146-AA19-52 205 219 232 24 16-28 95 559 60 60 408.77 D1G146-AA33-52 205 219 232 48 36-56 95 559 60 60 407.77 D1G160-DA19-52 225 241 176 24 16-28 103 548 58 60 426.22 D1G160-DA33-52 225 241 176 48 36-56 103 548 58 60 426.22 56 to 271 CFM Long life operation Wide even airflow DC CROSSFLOW BLOWERS Dim (mm) Volts Range Watts CFM dba Max C Net Price QG030-148-12 203 50 48 12 8-24 6.2 44.1 49 60 $108.67 QG030-148-14 203 50 48 24 16-28 6.2 44.1 49 60 108.67 QG030-198-12 260 50 48 12 8-14 8.0 58.9 51 60 110.05 QG030-198-14 260 50 48 24 16-28 8.0 58.9 51 60 110.05 QG030-303-12 365 50 48 12 8-14 8.7 82.4 51 60 131.56 QG030-303-14 365 50 48 24 16.28 8.7 82.4 51 60 131.56 QG030-353-12 415 50 48 12 8-14 9.6 91.3 51 60 138.04 QG030-353-14 415 50 48 24 16-28 9.6 91.3 51 60 138.04 Brushless DC fan Plastic housing Air exhaust over struts SERIES 400JHH DC TUBEAXIAL FANS Dim. (mm) Volts Watts CFM dba Max C Net Price 412JHH 40 40 25 12 3.9 14 44 70 $42.52 414JHH 40 40 25 24 3.9 14 44 70 42.52 SERIES 400 AND 400F AXIAL DC FANS DC fans with electronically commutated external rotor motors. Fully integrated commutation electronics With electronic protection against reverse polarity. The fan only operates when the polarity is correct. Impedance protected against blocking and overloading Fan of fiberglass reinforced plastic. PBT housing, PA impeller Air exhaust over struts. Rotational direction CCW looking at rotor Electrical connection via 2 leads AWG 28, TR 64. Stripped and tinned ends Mass 17 g. (27 g) Sintec-sleeve bearings Max C 70 Dim. (mm) Volts Range Watts CFM dba Net Price 405F 40 40 10 5 4.5-5.5 0.7 4.7 26 $16.83 412FM 40 40 10 12 10-14 0.6 3.5 19 15.59 412F 40 40 10 12 10-14 0.7 4.7 26 15.15 412FH 40 40 10 12 10-14 0.8 5.3 29 15.53 414F 40 40 10 24 20-28 0.8 4.7 26 15.78 405 40 40 20 5 4.5-5.5 0.9 5.9 18 19.77 412 40 40 20 12 10-14 1.0 5.9 18 16.90 412H 40 40 20 12 10-14 1.6 8.0 29 22.57 414 40 40 20 24 20-28 1.0 5.9 18 17.46 SERIES 250N DC AXIAL MICRO FANS DC micro-fans with electronically commutated external rotor motors. Fully integrated commutation electronics With electronic protection against reverse polarity. The fan only operates when the polarity is correct. Impedance protected against blocking and overloading Fan of fiberglass reinforced plastic PBT housing, PA impeller. Air exhaust over struts. Rotational direction CCW looking at rotor Electrical connection via 2 leads AWG 28. Stripped and tinned ends Mass 5 g Sintec-sleeve bearings SERIES 500F DC AXIAL FANS DC fans with electronically commutated external rotor motors. Fully integrated commutation electronics With electronic protection against reverse polarity. The fan only operates when the polarity is correct. Impedance protected against blocking and overloading Fan of fiberglass reinforced plastic. PBT housing, PA impeller Air exhaust over struts. Rotational direction CCW looking at rotor Electrical connection via 2 leads AWG 28, TR 64. Stripped and tinned ends Mass 25 g Sintec-sleeve bearings Continued on next page... 1412