CURRICULUM VITAE Name : Ali Kamil Makki Al-Shaikhli Place and Date of Birth : Baghdad, Iraq, 2 nd May 1950 Languages : Arabic and English UNIVERSITY DEGREES Diploma (with Distinction) in Electrical and Electronic Engineering, Leeds Polytechnic, U.K., 1980. M.Sc. in Electroheat and Industrial Process Heating ( by examination and dissertation ), Electronic and Electrical Engineering Department, Loughborough University of Technology, U.K., Dissertation entitled : " Methods of induction billet heating work coil design ", 1981. Ph.D., Electronic and Electrical Engineering Department, Loughborough University of Technology, U.K., thesis entitled : "A novel method for the design of induction heating work coils ", 1985. POSITIONS From 1986 to 1987 ; National Service (working in : Military Technical College and Military Technical Institute) From October 1987; (Working in the Department of Electrical and Electronic Engineering, University of Technology, Baghdad, Iraq) as bellow : From October 1987 to January 1992 : Lecturer From January 1992 to June 2004 : Assistant Professor From June 2004 : Professor From May 2003 ; Head of the Department NOTICE : Head of Department in the University of Technology is equivalent to a Dean of a college in other universities, as there is no colleges in this university. I
TEACHING ACTIVITIES Lectures, tutorials, laboratory and project supervision in : Electrical Technology, Electrical Circuits, Electrical Networks, Electrical Drives, Electromagnetic Fields, Electrical Machines and Electrical Power Systems for under-graduate students. Lectures in Electroheat and project supervision in Induction Heating and Electrical Machines for post-graduate students (Ph.D. and M.Sc.). UNIVERSITY OFFICIAL ACTIVITIES These include, examining post-graduate theses in the fields of machines, induction heating, electromagnetic, and power, giving consultations in electrical technology, electroheat and induction heating to organizations outside the university, supervision of different laboratories and participating in various committees such as examinations, field training, scientific, syllabus organization and staff promotion committees. APPRECIATION LETTERS RECEIVED Many letters from head of the university, head of the department and organizations outside the university. MEMBERSHIP OF PROFESSIONAL ORGANIZATIONS Member, the Iraqi Engineers Union. Member, the Institute of Electrical and Electronic Engineers ( IEEE ), U.S.A. Associate Member, the Institution of Electrical Engineers ( IEE ), U.K. PUBLICATIONS AND POSTGRADUATE THESES SUPERVISION ( 31 )papers, ( 3 ) books, and ( 16 ) postgraduate theses ( see the attached papers please ) II
PUBLICATIONS OF PROF. A.K.M.AL-SHAIKHLI 1- A.K.M. Al-Shaikhli and L.Hobson Improvements in the design of induction billet heaters, 19th UPEC, University of Dundee, U.K., April 1984. 2- A.K.M. Al-Shaikhli and L.Hobson: Methods of analysis for induction heating work coils,20th UPEC, Huddersfield Polytechnic U,K., April 1985. 3- L.Hobson and A.K.M. Al-Shaikhli: Illustrating electromagnetics using an industrial process, IJEEE, Vol. 23, PP 77-85, 1986. 4- A.K.M. Al-Shaikhli and L.Hobson Novel technique for the design of induction billet heaters IEE proc., vo1. 133, no. 5, pt. B, pp 323-330, 1986. 5- A.K.M. Al-Shaikhli: Electroheat,(in Arabic), Al-Muhandis, no.102, pp.52-56, 1989. 6- A.K.M. Al-Shaikhli: Power distribution in a rectangular workpiece heated by induction, IEEE Industry Applications Society Annual Meeting, Seattle, U.S.A., Oct. 7-12/ 1990, pp 2049-2052. 7- A.K.M. Al-Shaikhli: Computer simulation of induction heating systems, National Conference for the Applications of Computers, Baghdad, Iraq, 15-16 Dec. 1991, pp 289-301. 8- A.K.M. Al-Shaikhli: The performance of induction billet heaters, Al- Muhandis, no. 106, pp 19-27, 1991. 9- A.K.M. Al-Shaikhli, S.R Alwash and K.M Abood Methods of analysis for multilayer induction heating coils, Eng. & Tec, vol. 11, Suppl. no.2, pp 26-38, 1992. 10- A.K.M. Al-Shaikhli, S.R Alwash and K.M Abood Improvement in the analysis of multilayer induction heating coils, 1st Basrah Electrical Engineering Symposium, 20-21 April 1992. pp 315-326. 11- A.K.M. Al-Shaikhli:, Computer methods of analysis for induction heaters, Al-Rafidain Eng, vol 3, no.2, pp 138-151,1995. 12- A.K.M. Al-Shaikhli, and M.K. Makki: Practical Evaluation of the equivalent circuit method for the induction heating of magnetic load, (in Arabic). Eng. & Tec., vol 16. No. 9,pp 291-299, 1997. 13- A.K.M. Al-Shaikhli, and B.A. Nasir: Comparison study between different methods of travling wave induction heaters analysis, Scientific Journal of Tikrit University, Eng.Sci., vol 4. no. 3,pp 1-12, 1997. 14- A.K.M. Al-Shaikhli : A new approach for the analysis of multilayer induction heating coils, Eng. & Tec., vol 17. no. 10,pp 953-962, 1998. III
15- A.K.M. Al-Shaikhli, and B.A. Nasir: Theory of travelling wave induction heaters, Eng.& Tec., vol 17. no. 11,pp 1035-1046, 1998. 16- A.K.M. Al-Shaikhli, and B.A. Nasir: The design of travling wave induction heaters, Eng.& Tec., vol 19. no. 4,pp 292-303, 2000. 17- A.K.M. Al-Shaikhli, J.A.A. Al-Aboudi and T.E.Al-Jubory: Heating vessels by electromagnetic induction, Eng.& Tec., vol 19. no. 1,pp 93-105, 2000. 18- A.K.M. Al-Shaikhli, and M.M.Al-Khairo: Calculations and construction of induction furnaces, (in Arabic). Eng.& Tec., vol 19. no. 3,pp 69-76, 2000. 19- A.K.M. Al-Shaikhli, and J.A. Al-Aboudi: Normalized power density distribution for two dimensional induction heated loads, Eng.& Tec., vol 20. no. 1,pp 155-166,2001. 20- A. I.Abdullatif, A.K.M. Al-Shaikhli and N.S. Al-Jewari: The effect of induction heating load on ripple control system operation, Eng.& Tec., vol 20. Suppl. no. 1,pp 64-80, 2001. 21- A.K.M.Al-Shaikhli: CAD method of induction heating coils, Eng.& Tec., vol 20. no.6,pp 405-411, 2001. 22- A.K.M.Al-Shaikhli, and T.H..Al-Mhana: Improvement to the equivalent circuit method of induction heaters, Al- Rafidain. Eng., vol 9. no. 1,pp 97-106 2001. 23- A.H. Ahmed, A.K.M. Al-Shaikhli, and N.E.Adam: Optimal D.C motor speed control, IJCCCE., vol. 3. no. 2,pp 190-202, 2002. 24- A.K.M.Al-Shaikhli, A.Anwar and B.A.Nasir :"Analysis of traveling wave induction heater ", Eng & Tec.,vol.22, no.4, pp 211-219,2003. 25- A.K.M.Al-Shaikhli,Z.D.Shebeeb and K.A.Jalal : "Modeling, simulation and suppression control for variable-reluctance stepping motor ",Eng & Tech, vol.22, no.6, pp 343-354,2003. 26- A.K.M.Al-Shaikhli, S.A.Khudair and K.A.Jalal : "Simulation model of direct torque control for induction motor based on artificial neural networks", IJCCCE, vol. 7, no. 2, pp 108-115, 2007. 27- A.K.M.Al-Shaikhli,: "Application of induction heating in cooking", The 1 st Regional Conferance of Engineering Science, Nahrain University, College of Engineering, Baghdad Iraq, 5 6 Nov. 2008. 28- A. K. M. Al-Shaikhli, H. A. R. Akkar and M. M. E. Ali : "FEM simulation of single and multi layerd induction heating systems", Eng. & Tec.,vol. 27, no. 13, pp 2245-2262, 2009. 29- A.K.M. Al-Shaikhli, and Ahmed A. Aboud : " Stirring of coreless induction furnaces ", Australian Journal of Basic and Applied Sciences, ISSN, 1991-8178, 2009. 30- A.K.M. Al-Shaikhli, and Hassan A. Al-Ssadi : Analysis of induction cooker coil, Eng. & Tech., vol.28, no.21, pp 6288-6305, 2010. IV
31- A.K.M. Al-Shaikhli, H.A.R. Akkar and M.E.Ali : Modeling of induction heating system by using artificial neural networks, IJCCCE, (to be published) BOOKS (IN ARABIC) 1. " Engineering of Induction Heating " (Published in 2002) 2. " Electroheat Technology " (Published in 2003) 3. " Electrical Technology " (to be Published ). POSTGRADUATE THESES SUPERVISED BY PROF. A.K.M.AL-SHAIKHLI 1. Induction heating work coils, M.Sc. by K.M.Abood, University of Technology, 1989. 2. Analysis of multilayer induction heating coils, M.Sc. by K.S.N.AL- Ani, University of Technology, 1995. 3. Analytical and numerical modeling of induction vessel heating, M.Sc. by T.E.Al-Jubory, University of Technology, 1996. 4. Theory and design of travelling wave induction heaters flat metallic workpieces, Ph.D. by B.A.Nasir, Al-Mustansiriyah University, 1997. 5. Design and construction of the coreless induction furnace, M.Sc. by M.M.Al-Khairo, University of Technology, 1997. 6. A simplified approach of power and field distributions in induction heating systems, M.Sc. by J.A.Al-Aboodi, University of Technology, 1998.. 7. The effect of induction heating loads on ripple control operation, M.Sc. by N.S.Al-Jewari, University of Technology, 1999. 8. Optimal D.C. motor speed control, M.Sc. by N.E.Y.Adam, University of Technology, 1999. 9. A comprehensive study and a new algorithm for the equivalent circuit method of induction heaters, M.Sc. by T.H.Al-Mhana, University of Technology, 2000. 10. Stability analysis and suppression control oscillation for stepping motors, M.Sc. by K.A. Jalal, University of Technology, 2002. 11. The magnetic field study of a finite solenoid, M.Sc. by F. H. F. Al- Waily, University of Technology, 2005. 12. "Eddy current testing for detecting faults in metal tubes", M.Sc. by J.M.E.AL-Sudani, University of technology, 2006. V
13. "Analysis of coreless induction furnaces", M. Sc. by B.M.F. Al- Shemery, University of Technology, 2007. 14. "Direct torque control of induction motor based on intelligent systems", Ph.D. by K.A.Jalal, University of Technology, 2007. 15. "Analysis of induction heating systems based on intelligent systems", Ph.D. by M.M.E. Ali, University of Technology, 2009. 16. "Analysis of induction cooker using planar coil", M.Sc. by H.A.M. Al-Ssadi, University of Technology, 2009. VI