Extended/Direct Handle Motor Disconnect Switch

Similar documents
Extended/Direct Handle Motor Disconnect Switch

UL508 Listed Manual Motor Controllers

UL508 Listed Manual Motor Controllers

UL508 Listed Manual Motor Controllers

UL A (Formerly UL508) UL A Listed Manual Motor Controllers MOTOR DISCONNECT SWITCHES FEATURES AND BENEFITS: with Disconnecting Means

LOAD BREAK SWITCHES AND SWITCH FUSES

LOAD BREAK SWITCHES A TECHNICAL DATA FOR KU, KUE, VKA AND EVA SERIES

SIRCO UL98 Load break switches standards UL and CSA 100 to 1200 A

Product Specification Sheet #3LD2.1

Non-fusable disconnect switches standards UL and CSA from 16 to 100 A

SIRCO UL98 Non-fusible switches standards UL and CSA 100 to 1200 A

HP Series. Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

Section Contents. Disconnect Switches

for Non-Fusible Disconnect Switches

Just the right switch for your application

MSW. MSW Catalog Number Sequence. Standard Features MSW 25 B- 3

SD Series Non-Fused Load Switches

FUSIBLE DISCONNECT SWITCHES

SIRCO M UL 508 Non-fusible disconnect switches standards UL and CSA from 16 to 100 A

Compact Circuit Protector (CCP)

Compact Circuit Protector (CCP)

Non-Fused Load Break Switches FSSC, SX, SXDC, SC

Cat. No. 194R-J Note: Your order must include 1) Cat. No. of disconnect switch, 2) shaft, 3) handle, and 4) any accessories.

Abox-i Series. petrochemical plants, steel mills and railways.

Non-fusible. Non-fusible disconnect switches 16A 3150A, 600VAC A, 1000VDC. International acceptance. Disconnect switches.

SPEEDFAX TM 2011 Disconnect Switches Contents

UL 508 Non-Fusible Disconnect Switches

PowerLine OS Switch Fuses A, 690V

GV2, GV3, and GV7 Manual Motor Starters, Controllers, and Protectors Standard Features

Compact Circuit Protector (CCP)

Compact Circuit Protector (CCP) 1-, 2- and 3-pole Class CC, Midget, 10x38mm

UL 508 Non-Fusible Disconnect Switches

Load Break Disconnect Switches FSLBS

Enclosed Rotary Switch Product Specification Sheets Table of Contents

Compact Circuit Protector (CCP)

SAFETY SWITCHES / ISOLATORS A TECHNICAL DATA

for Non-Fusible Disconnect Switches

LDisconnect Switches. Disconnect Switches

UL/CSA Non-fused Disconnect Switches

AM-Tite Series Non-Metallic Plugs MSR Series Switched and Interlocked Receptacles

footprint of traditional fusible switches

Non-Fused Load Break Switches FSSC, SX, SXDC, SC

Certifications UL Listed (File No. E 14841, Guide NLRV; File No. E 47426, Guide WHTY) CSA Certified (File No. LR1234) CE

SIRCOVER UL1008/98 Changeover switches standards UL and CSA 100 to 1200 A

Bulletin 1494F Fixed-Depth Flange-Mounted Disconnect Switches. Selection Guide

UL Enclosed Disconnect Switches (Fused and Non-Fused)

ASL09..S 3-pole Contactors - Spring Terminals

Compact Circuit Protector (CCP)

Overview for Fusible Disconnect Switches

Contents. Volume 5 Motor Control and Protection CA E December

Compact Circuit Protector

What you need to know. Â Conformity to standards

Siemens AG Switch Disconnectors SENTRON. Configuration. Edition 10/2015. Manual. siemens.com/lowvoltage

Non-Fused Load Break Switches FSSC, SX, SXDC, SC

Compact Circuit Protector (CCP) Application Note

Bussmann Open and Enclosed Rotary Disconnect Switches. Exceptional Breadth and Availability for Your Application

LFJ602003C 200A 600V Fus Block

KATKO Safety Switches:

500V / V /

BUSSMANN. Next generation Compact Circuit Protector (cat. no. CCP2) SERIES. For use with Class CC, Supplemental and IEC 10x38 mm fuses

Vistop TM isolating switches 63 to 160A

Breakers and switches. Enclosed switches Heavy duty safety switches Fusible and non-fusible Amperes

Bulletin 1494V Variable Depth Flange-Mounted Disconnect Switches. Bulletin 1494F Fixed-Depth Flange-Mounted Disconnect Switches

FUSIBLE DISCONNECT SWITCHES (UL98) GM SERIES

Rotary Cam Switches. Rotary Cam Switches

Compact Circuit Protector

KT4 Manual Motor Starter

Series L7 Disconnect Switches (to 315A)...L29 Technical Information...L36 Dimensions...L38

Suitable for use as: OSHA Lockout/Tagout. disconnects. Safety switches Load break switches Isolators

Product index. 4 - Manual motor protectors. Phone: Fax: Web: -

BETA Switching Switches and Light Indicators

SIRCO MV PV Load break switches for photovoltaic applications for use up to 1000 VDC from 63 to 80 A

File E47705 Vol. 7 Sec. 9 Page 1 Issued: and Report Revised:

3RV1011-0DA15 CIRCUIT-BREAKER, SIZE S00,

for Non-Fusible Disconnect Switches

Breakers and Switches. Switches Switch-disconnectors OT and OTM

...at Altech, of course!

Modulostar US10 Modular fuse-holders

Non-Fused Load Break Switches FSSC, SX, SXDC, SC

Product index. 4 - Manual motor protectors. Manual motor protectors. Manual motor protectors Low Voltage Products & Systems 4.

PRODUCT PROFILE VARIABLE-DEPTH, FLANGE- MOUNTED DISCONNECT SWITCHES A BULLETIN 1494V

Preferred Cutout, Disconnect Enclosure, Type 12

Safety switches for hinges

AF40... AF96 3-pole contactors Technical data

Big performance in a small package

SIRCO PV UL98B Load break switches for photovoltaic applications from 100 to 2000 A, up to 1500 VDC

Altech UL1077/508 Busbar System

Rotary Disconnect Switches, Bulletin 194R

LK Position Switches TECHNICAL DATASHEET.

Bulletin 140M Motor Protectors

Switch Disconnectors

AF40... AF96 3-pole contactors 30 to 60 hp at 480 V AC AC / DC operated with 1 N.O. + 1 N.C. auxiliary contacts

Low Voltage Switches. Enclosed switches - eot Manual motor controllers and disconnects

60A 100A for Fusible Disconnect Switches

Cylindrical fuse-link

Ideal for use as a manual starter

Disconnect switches Non-fusible Fusible Enclosed

A302DN.40/.63A Thermal Current Motor Starter

General information about motor protection

MANUALLY OPERATED CHANGEOVER SWITCHES

Transcription:

Extended/Direct Handle Motor Disconnect Switch The KU...N series can be used with extended and direct handles (see page 6-11 for details). 4 Pole NEW Catalog Number No. of Poles General Purpose Current Maximum Voltage Motor FLA @ 480V AC Motor FLA @ KU316N 3 (4 pole - KU416N) 16 A 14 A 9 A KU325N 3 (4 pole - KU425N) 25 A 21 A 11 A KU340N 3 (4 pole - KU440N) 40 A 27 A 17 A KU363N 3 (4 pole - KU463N) 34 A 27 A KU380N 3 (4 pole - KU480N) 40 A 32 A Horsepower Rating/HP 110-120V AC 200V AC 208V AC 220-240V AC 265V AC 277V AC 380-415V AC 440-480V AC 550-1 2 1.5 3 1.5 3 2 3 5 5 7.5 10 7.5 1.5 3 2 5 2 5 3 5 7.5 7.5 10 15 10 2 3 3 7.5 3 7.5 5 7.5 10 10 15 20 15 3 5 5 10 5 10 10 10 20 25 25 5 7.5 10 15 15 15 25 30 30 Short Circuit Withstand Rating at 600 V with Max. Fuse Size/Class: K5 RK5 RK1 J Terminal Size Acceptability (Cu Conductors only, 75 C) Terminal Torque Screw Head Type 14-8 AWG 14-8 AWG 14-8 AWG 100 A 12-4 AWG 100 A 12-4 AWG Dimensions (to convert to inches multiply by 0.03937) 15 KU3xxN - 3 Pole 73 49.5 58 15.8 15.8 15 73 65 58 KU4xxN - 4 Pole 15.8 15.8 15.8 Weight 0.172 kg (0.379 lb.) (3 pole) 0.215 kg (0.474 lb.) (4 pole) 0.172 kg (0.379 lb.) (3 pole) 0.215 kg (0.474 lb.) (4 pole) 0.172 kg (0.379 lb.) (3 pole) 0.215 kg (0.474 lb.) (4 pole) 0.200 kg (0.441 lb.) (3 pole) 0.245 kg (0.540 lb.) (4 pole) 0.200 kg (0.441 lb.) (3 pole) 0.245 kg (0.540 lb.) (4 pole) Suitable Accessories Extended Handle Applications (Door Interlock Mechanism) Shaft Handles Auxiliary Switch Fuse Holder Direct Handle Applications Handle for 3 Pole Handle for 4 Pole Door Mounting Kits KV 10x38, KV 10x38 CC 4 Altech Corp. 35 Royal Road Flemington, NJ 08822-6000 Phone (908)806-9400 FAX (908)806-9490 www.altechcorp.com

Extended/Direct Handle Motor Disconnect Switch The VKA...N series can be used with extended and direct handles (see page 6-11 for details). 4 Pole Catalog Number No. of Poles General Purpose Current Maximum Voltage Motor FLA @ 480V AC Motor FLA @ VKA380N 3 (4 pole - VKA480N) 47 A VKA3100N 3 (4 pole - VKA4100N) 100 A 54 A VKA3125N 3 (4 pole - VKA4125N) 125 A 68 A VKA3160N 3 (4 pole - VKA4160N) 83 A Horsepower Rating/HP 110-120V AC 200V AC 208V AC 220-240V AC 265V AC 277V AC 380-415V AC 440-480V AC 550-3 7.5 7.5 15 7.5 15 15 25 20 30 25 40 3 7.5 7.5 15 7.5 15 15 30 20 40 30 50 5 10 15 25 15 25 15 30 20 40 25 50 30 60 10 25 10 25 15 30 20 30 20 30 25 50 30 60 40 75 Short Circuit Withstand Rating at 600 V with Max. Fuse Size/Class: K5 RK5 RK1 J Terminal Size Acceptability (Cu Conductors only, 75 C) Terminal Torque Screw Head Type 200 A 8-1/0 AWG 50 lb. in. (5.6 Nm) 5 Allen Key 200 A 8-1/0 AWG 50 lb. in. (5.6 Nm) 5 Allen Key 200 A 8-1/0 AWG 50 lb. in. (5.6 Nm) 5 Allen Key 200 A 8-1/0 AWG 50 lb. in. (5.6 Nm) 5 Allen Key Dimensions VKA3xxxN - 3 Pole VKA4xxxN - 4 Pole (to convert to inches multiply by 0.03937) 15 82 67 53 79 69 20 15 82 67 53 20 99 89 1 2 3 5 6 Ø4.5 82 1 3 2 4 5 7 6 8 Ø4.5 82 Weight 0.480 kg (1.058 lb.) (3 pole) 0.620 kg (1.367 lb.) (4 pole) 0.480 kg (1.058 lb.) (3 pole) 0.620 kg (1.367 lb.) (4 pole) 0.480 kg (1.058 lb.) (3 pole) 0.620 kg (1.367 lb.) (4 pole) 0.480 kg (1.058 lb.) (3 pole) 0.620 kg (1.367 lb.) (4 pole) Suitable Accessories Extended Handle Applications (Door Interlock Mechanism) Shaft Handles Auxiliary Switch Fuse Holder Direct Handle Applications Handle for 3 & 4 Pole Door Mounting Kits L(1,2.3)00AD11-ST VKA1.V, VKA2.V K/VKA3-4P (Y/R) OKA/VKA x L(1,2.3)00AD11-ST VKA1.V, VKA2.V K/VKA3-4P (Y/R) OKA/VKA x L(1,2.3)00AD11-ST VKA1.V, VKA2.V K/VKA3-4P (Y/R) OKA/VKA x L(1,2.3)00AD11-ST VKA1.V, VKA2.V K/VKA3-4P (Y/R) OKA/VKA x Altech Corp. 35 Royal Road Flemington, NJ 08822-6000 Phone (908)806-9400 FAX (908)806-9490 www.altechcorp.com 5

Extended Handle Accessories LK11 LK10 DOOR INTERLOCK HANDLES (padlockable with up to three 1/4 padlocks) 28.2 LK10 Y/R UL UL Type 4X IP66 Yellow/Red LK11 U UL Type 4X IP67 Black Defeated State LK11 Y/R U UL Type 4X IP67 Yellow/Red Normal State Defeated State PUSH Actuator to the left and handle can be defeated. PUSH IN SCREWDRIVER to defeat mechanism Note: After tab is broken, NEMA Type 4X rating will be lost. DOOR INTERLOCK SHAFT Leng The steel shaft ensures reliable operation even in the toughest conditions. L200 AD11-ST 200 Steel TAB BREAK TAB by pushing screwdriver or equivalent with some force. Warning: The defeater mechanism should only be used by a trained professional. L100 AD11-ST 100 Steel Ø4 Ø22.5 Actuator Length (L) Material 28.2 Ø78.5 12.7 Ø79 3 m m The defeater mechanism allows a screwdriver to be inserted to release the lock and open the door with the mechanism in the ON position. 0 Ø4 Normal State DEFEATABLE MECHANISM OPERATING INSTRUCTIONS 41 38 12 63 Template Panel ing: Ø22.5 LK10 UL UL Type 4X IP66 Black Template Example of handle with 1/4 padlocks. Environmental Rating (UL) (IEC) 4 LK10 (Y/R) UL: Single hole mounting (22.5 ) LK11 (Y/R) U: Retention mechanism (only rotates 90 from off to on, keeps handle in off position while cabinet door is open) th SHAFT CUTTING RECOMMENDATIONS L300AD11-ST 300 Steel 1 cut to length SHAFT LENGTH CUTTING GUIDELINE LK10 LK11 Door Interlock Handle Door Interlock Handle 22.5 + X + 26 (±1.5) = Shaft Length 22.5 + X + 29 (±1.5) = Shaft Length 2 notch location & width ~1 8 3 file tip Panel Door cut notch (optional) Panel Door 4 PZ0 1 Nm Max 6 PZ0 1 Nm Max final product Altech Corp. 35 Royal Road Flemington, NJ 08822-6000 Phone (908)806-9400 FAX (908)806-9490 www.altechcorp.com

Extended Handle Accessories AUXILIARY SWITCHES The auxiliary switches are the snap-on type and can be retrofitted. Makes later and breaks earlier than the main contacts. KU1.V KU2.V VKA1.V VKA2.V Electrical Rating 16 A/1/2HP/125-250V AC 16 A/1/2HP/125-250V AC 16 A/1/2HP/125-250V AC 16 A/1/2HP/125-250V AC No. of contacts 1n.o./1n.c. 2n.o./2n.c. 1n.o./1n.c. 2n.o./2n.c. For Use With KU models KU models VKA models VKA models FUSE HOLDER This fuseholder can be retrofitted with the KU340N. Therefore design changes can be incorporated with ease to allow a fusible disconnect. *For more detailed ratings please see pages 4-5. 58 Kit shown; comes with KU340N and fuse holder. KKV 332 KKV 332CC KV 10x38 KV 10x38 CC Electrical Rating* / / / / Fuse Type 10x38, Midget Class CC 10x38, Midget Class CC For Use With KU340N KU340N Kit Includes KV 10x38 / KU340N KV 10x38 CC / KU340N 71 58 Kit shown; comes with switch and fuse holder. 50 70 125 125 79 32 60 Ø4.2 56 59 56 50 56 60 50 60 CHANGE-OVER KITS For 2 KU switches Available with black or yellow/red handle (Y/R) 134 7 KU3/4P VV Black KU3/4P VV Y/R Yellow/Red 93 38 48 PARALLEL KITS For KU and VKA-switches Assembly depth for KU 155-300 Assembly depth for VKA 164-310 Includes 200 steel shaft Center pivoting model available, contact Altech. L 75-220 65.5 45 Matching Handle LK11 1-0-2 U Black LK11 1-0-2 Y/R U Yellow/Red Length (L) For use with RV 66S-ST 2x KU 3 pole (3P) RV 80S-ST 80 2x KU 4P/VKA 3P RV 104S-ST 104 2x VKA 4P Altech Corp. 35 Royal Road Flemington, NJ 08822-6000 Phone (908)806-9400 FAX (908)806-9490 www.altechcorp.com 7

Direct Handle Accessories and Mounting Alternatives DIRECT HANDLES Improved design with metal shaft. Use for all your inside the panel applications. 1 suitcase lock location. Lockable with 1 suitcase lock. 52 81 45 36 45 K/KU3P K/KU3P Y/R Black Yellow/Red For use with KU models (3P) KU models (3P) Lockable with 1 suitcase lock. 70 81 45 36 K/KU4P K/KU4P Y/R Black Yellow/Red For use with KU models (4P) KU models (4P) 45 Lockable with 1 suitcase lock. K/VKA3-4P K/VKA3-4P Y/R Black Yellow/Red For use with VKA models (3/4P) VKA models (3/4P) 105 3 Pole 4 Pole 1 82 45 0 43 43 ALUMINUM DIN RAIL Panel mount option for small Disconnect Switches. 60 73 95 60 73 95 RKA 3P 14 1 RKA 4P 14 1 RKA 3P RKA 4P For Use With KU325/40/63N KU425/40/63N 84 4 27 7.5 NOTE: In the rare case that your mounting hardware (screws) for DIN Rail interfere with the enforcement studs in the back of the Motor Disconnect Switch please use smaller ( M3 or equivalent) flathead screws or change your DIN Rail to the 15 high version. 4 27 7.5 8 Altech Corp. 35 Royal Road Flemington, NJ 08822-6000 Phone (908)806-9400 FAX (908)806-9490 www.altechcorp.com

OKA/KU Door Mounting Kit for KU Switches Designed for fast and easy assembly. Kit includes handle, shaft, mounting hardware and drill template; it does not include motor disconnect switch. Environmental Rating (UL): UL Type 4X (IEC): IP66 72 38 Ø79 Template & Instructions Shown with switch and display plate. (sold separately) (Black Handle) (Yellow/Red Handle) No. of aux. switches For use with OKA/KU LK10 OKA/KU LK10 Y/R 0 3 Pole KU switch OKA/KU LK10 1.V OKA/KU LK10 1.V Y/R 1 3 Pole KU switch OKA/KU LK10 2.V OKA/KU LK10 2.V Y/R 2 3 Pole KU switch OKA/KU4P LK10 OKA/KU4P LK10 Y/R 0 4 Pole KU switch OKA/KU4P LK10 1.V OKA/KU4P LK10 1.V Y/R 1 4 Pole KU switch OKA/KU4P LK10 2.V OKA/KU4P LK10 2.V Y/R 2 4 Pole KU switch Assembly Instructions Use the enclosed drill template to prepare the door for door mounting kit assembly. Discard the switch handle on the disconnect switch and follow photo-illustration below. Kit does not include disconnect switch. discard PANEL Altech Corp. 35 Royal Road Flemington, NJ 08822-6000 Phone (908)806-9400 FAX (908)806-9490 www.altechcorp.com 9

OKA Door Mounting Kit for KU Switches Designed for fast and easy assembly. Kit includes handle, shaft, mounting hardware and drill template; it does not include motor disconnect switch. Environmental Rating (IEC): IP65 72 32 70 62 Template & Instructions 62 Shown with switch and display plate. (sold separately) (Black Handle) (Yellow/Red Handle) No. of aux. switches For use with OKA 0.V OKA 0.V Y/R 0 3 Pole KU switch OKA 1.V OKA 1.V Y/R 1 3 Pole KU switch OKA 2.V OKA 2.V Y/R 2 3 Pole KU switch Assembly Instructions Use the enclosed drill template to prepare the door for door mounting kit assembly. Discard the switch handle on the disconnect switch and follow photo-illustration below. Kit does not include disconnect switch. 10 Altech Corp. 35 Royal Road Flemington, NJ 08822-6000 Phone (908)806-9400 FAX (908)806-9490 www.altechcorp.com

OKA/VKA Door Mounting Kit for VKA Switches Designed for fast and easy assembly. Kit includes handle, shaft, mounting hardware and drill template; it does not include motor disconnect switch. Environmental Rating (UL): UL Type 4X (IEC): IP66 87 41 63 ON Template & Instructions 82 78.7 OFF Shown with switch. (sold separately) (Black Handle) (Yellow/Red Handle) No. of aux. switches For use with OKA/VKA 0.V OKA/VKA 0.V Y/R 0 3 Pole VKA switch OKA/VKA 1.V OKA/VKA 1.V Y/R 1 3 Pole VKA switch OKA/VKA 2.V OKA/VKA 2.V Y/R 2 3 Pole VKA switch OKA/VKA4P 0.V OKA/VKA4P 0.V Y/R 0 4 Pole VKA switch OKA/VKA4P 1.V OKA/VKA4P 1.V Y/R 1 4 Pole VKA switch OKA/VKA4P 2.V OKA/VKA4P 2.V Y/R 2 4 Pole VKA switch Assembly Instructions Use the enclosed drill template to prepare the door for door mounting kit assembly. Discard the switch handle on the disconnect switch and follow illustration below. Kit does not include disconnect switch. PANEL Altech Corp. 35 Royal Road Flemington, NJ 08822-6000 Phone (908)806-9400 FAX (908)806-9490 www.altechcorp.com 11