NOOR AZLINA BT. MOHD. SALLEH 2014: PhD in Mechanical Engineering (UiTM) 2003: Degree in Mechatronics Engineering (IIUM) Date of birth: 30 January 1980 Nationality: Malaysian Marital Status: Married I/C Number: 800130025130 Office: Tower 1, Level 14-8c, Engineering Tower, Faculty of Mechanical Engineering, 40450 Shah Alam, Selangor, Malaysia. Home: 33 Jalan Gunung Nuang U11/28, Bukit Bandaraya, 40450 Shah Alam, Selangor, Malaysia. Office: +603 55442978 H/p: +601 95592390 Fax: +603 55435160 Email: noorazlinamohdsalleh @ salam.uitm.edu.my noorazlinamohdsalleh @ gmail.com azlina_salleh @ yahoo.com CAREER HIGHLIGHTS Faculty of Mechanical Engineering, UiTM Shah Alam Now June 2014 International Liason Officer/Coordinator Industrial, Community and Alumni Networking/Senior Lecturer. Coordinator for Centre of Strategic Planning and Information. Vice President of Alumni Faculty of Mechanical Engineering UiTM Shah Alam. Resource Person for Industrial Management Course (MEM 575) for Bachelor Degree (Mechanical) UiTM. Document Manager for Laboratory Accreditation Committee SAMM/ISO/IEC17025. Interview Panel for Program EM799 Masters in Engineering Management. Technical Working Group Committee for MEM603 Occupational Safety and Health. Assessor and Second Examiner Paper for MEC600 Engineers in Society for September 2015 February 2016. Assessor and Second Examiner Paper for MEC564 Manufacturing Processes Lab for September 2015 February 2016. Chairman for Industrial Project/ Business Proposal (MEM798) Program Master in Engineering Management, March July 2015 and September 2014 January 2015. Member of Outcome Based Education (OBE) Committee in Faculty of Mechanical Engineering. Member of Research and Publication Committee in Faculty of Mechanical Engineering. Member of Invention, Innovation and Design (IID) Committee in Faculty of Mechanical Engineering. Member of University Graduate Employability Engagement Taskforce (U-GET) in Faculty of Mechanical Engineering. Faculty of Mechanical Engineering, UiTM Pulau Pinang October 2009 October 2008 Lecturer (Contract) at Faculty of Mechanical Engineering for Diploma Programme Manufacturing. Actively involved as Student Facilitator for Student Leadership and Development Program. Established new coursework project for KJP355 - Production Management and MEM160- Workshop Technology Course. Hicom-Honda Manufacturing (M) Sdn. Bhd October 2008 - October 2005 QC Section Head (in-charged of supervisors, technicians and operators). Reported directly to CEO. Leader of QC/QA In-plant Inspection for all Honda motorcycles engine. Leader for export warranty and customer complaint. Established quality system for new Hicom-Honda casting plant. Lead Auditor for ISO9000:2000 and ISO14000:2004. Facilitator for 5S program and Innovative Creative Circle Program. Leader for Hicom- Honda Training Development Program. CURRICULUM VITAE
Proton Berhad September 2005 - June 2003 Design Engineer at Equipment Section, Engineering Design Department, Research and Development Centre. Lead Styling Department in establishing colour and trim chart for Gen2 and lead Exterior Trim Unit for Gen2, Waja Enhancement and Wira Special Edition (2004) and Satria R3 (2005). In-charged of 20 trim parts for seven car models in Engineering Design Department. Main responsibilities are to ensure that the design meet target specification, performance, safety and homologation requirement, meet development time frame and target cost. Other roles and responsibility are as follows: - To plan, monitor and check the technical suitability on respective components of new, carry-over or modify component or system. - To co-ordinate, prepare and revise relevant Design Concept Sheet, Design Planning Sheet, drawings, Engineering Bills o Materials (E-BOMs) and ISO documentations. - To co-ordinate system design work with appointed consultants or components vendors and liase with respective sections or departments to ensure it complies to design target. - To assist the superior or subordinate to plan, organize and manage the components developments as well as supporting other group units in the engineering design. Sirim Berhad July April 2002 Industrial Trainee at Industrial Robotics and Automation Centre. Designed and developed Semi- Automated Weaving Machine (Collaborative Project between SIRIM Berhad and State of Pahang Craft Department) for final year project. ACHIEVEMENTS International Level (Current 2014) Editor Journal of Mechanical Engineering. Paper Reviewer & Assessor Panel Technical Papers in Jurnal Teknologi (Special Issue: Advances in Materials Science and Technology Volume 76 No.3). Paper Reviewer & Assessor Panel Technical Papers in Jurnal Teknologi (Special Issue: Engineering Design and Materials Integrity Volume 76 No.9). Paper Reviewer & Assessor Panel Technical Papers in Jurnal Teknologi Jurnal Teknologi (Special Issue: Manufacturing and Engineering Management Volume 76 No.6). Secretariate Commitee, Co- Chairperson ICAME 2015 (International Conference on Advances in Mechanical Engineering), 28-30 Ogos 2015, Patrajasa Bali, Indonesia. Interview Panel for Students Selection in Scholarship for University of Applied Sciences Hochschule Osnabruck Germany. Interview Panel for Students Selection in Scholarship for University Geyongsang, Korea. National Level (Current 2015) Expert Panels/ Policy Makers Standard Committee/ Expert Panel for Establishing the 1 st 4R (Repair, Reuse, Recycle, Remanufacture) of Vehicles Parts and Components Standard with Sirim Berhad and Malaysia Automotive Institute. Standard Committee/ Expert Panel for Establishing the 1 st Motor Vehicle After Market 2S (Service and Spare parts) Workshop Code of Practice Standard with Sirim Berhad and Malaysia Automotive Institute. Standard Committee/ Expert Panel for Establishing National Occupational NOSS Development Panel for development of Automotive-After Sales Service Level 4 & 5 with Jabatan PKK and Malaysia Automotive Institute. Expert Panel for Reviewing National Remanufacturing Policy with MOSTI.
National Level (Current 2015) Expert Panels/ Policy Makers Expert Panel for Establishing Graphene National Plan 2016 2030 with MOSTI, MIMOS and Nano Awards (Current 2015) Champion (Most Innovative and Beautiful Booth) for Higher Education Week Malaysia 2015 by Ministry of Higher Education. Bronze Medal for Project Let s Recycle in Research, Innovation, Symposium and Exposition (RISE2015). Bronze Medal for Project E- Customer Complaints Handling System in Research, Innovation, Symposium and Exposition (RISE2015). Bronze Medal for Project Sound Absorption of Aluminium Foam with Functionally Graded Structure in Research, Innovation, Symposium and Exposition (RISE2015). Bronze Medal for Netball UiTM Championship 2015. Anugerah Kualiti Naib Canselor 2014. National Level (Current 2014) Research Grants Grant 1: Leader for Functionally Graded Aluminium Foam with Space Holder Replication Research 600- RMI/RAGS 5/3 (163/2014). Grant 2: Leader for New Social Risk Management Manufacturing System Framework Model Research 600-RMI/FRGS 5/3 (143/2014). Publications Noor Azlina Mohd. Salleh, Salmiah Kasolang, Ahmed Jaafar, Nurul Hayati Abdul Halim (2015), LeanTQM Leadership Management Practices in Malaysian Automotive Companies, Jurnal Teknologi. 76,6,1-6. Nurul Hayati Abdul Halim, Ahmed Jaafar, Noriah Yusof, Rosleena Jaafar, Ahmad Naufal Adnan, Noor Azlina Mohd. Salleh, Nur Nida Azira (2015), Standardized Work in TPS Production Line, Jurnal Teknologi,76,6,73-78. Malaysia Berhad. Judge for Invention and Innovation Design (IID) Research Innovation Symposium Exposition (RISE) RISE 2015, Shah Alam, Malaysia. Noorleena Mohd. Noorlan, Noor Azlina Mohd. Salleh (2015), Case Study on Line Balancing at The Engine Transmission Machining (ETM) Line in a Malaysia Automotive Company, 5th. International Symposium on Technology for Sustainability, National Institute of Japan and National Taipei Institute of Technology. Nasyitah Adnan, Noor Azlina Mohd. Salleh (2015), Case Study: Design and Development of Kanban System for Spin on-4 (Oil Filter) Line at an Automotive Industries in Malaysia, 5th. International Symposium on Technology for Sustainability, National Institute of Japan and National Taipei Institute of Technology. Luqman Hadi Azahar, Noor Azlina Mohd. Salleh (2015), Case Study: Kitting System Implementation in Malaysian Automotive Company, 5th. International Symposium on Technology for Sustainability, National Institute of Japan and National Taipei Institute of Technology. Luqman Hadi Azahar, Noor Azlina Mohd. Salleh, Nik Roselina Nik Roseley, Salmiah Kasolang, Ahmed Jaafar (2014), The Sustainability of Kanban System in a Malaysian Automotive Company, 4th. International Symposium on Technology for Sustainability, National Institute of Japan and National Taipei Institute of Technology.
Publications Noor Azlina Mohd. Salleh, Salmiah Kasolang, Hj Ahmed Jaafar (2013), Green Lean TQM Suppliers, Organization and Customers Management in Malaysian Automotive Companies, Applied Mechanics and Materials, 393, 29-35. Noor Azlina Mohd. Salleh, Salmiah Kasolang, Hj Ahmed Jaafar (2012),"Review study of developing an integrated TQM with LM framework model in Malaysian automotive industry", The TQM Journal, Vol. 24 Issue: 5, 399 417. Noor Azlina Mohd. Salleh, Salmiah Kasolang, Hj Ahmed Jaafar (2012) Green Lean TQM Practices in Malaysian Automotive Companies, World Academy of Science, Engineering and Technology, 70, pp1214-1220 Noor Azlina Mohd. Salleh, Salmiah Kasolang, Hj Ahmed Jaafar (2012), Green Lean Total Quality Information Management in Malaysian Automotive Companies, Procedia Engineering, Vol.41, pp1708 1713. Noor Azlina Mohd. Salleh, Salmiah Kasolang,Hj Ahmed Jaafar(2012), Simulation of Integrated Total Quality Management (TQM) with Lean Manufacturing (LM) Practices in Forming Process Using Delmia Quest,Procedia Engineering, Vol.41, pp1702 1707. Noor Azlina Mohd. Salleh, Salmiah Kasolang, Hj Ahmed Jaafar (2012), Green Lean TQM Human Resource Management Practices in Malaysian Automotive Companies, World Academy of Science, Engineering and Technology, Vol.70, pp340-344. Noor Azlina Mohd. Salleh, Salmiah Kasolang, Hj Ahmed Jaafar (2011), Lean TQM Automotive Factory Model System,World Academy of Science, Engineering and Technology, Vol.55, pp627 633. Noor Azlina Mohd. Salleh, Salmiah Kasolang, Hj Ahmed Jaafar (2010), Integrated Total Quality Management (TQM) with Lean Manufacturing (LM) Practices in Malaysian Automotive Industry, Proceedings of the 2010 International Conference on Advances in Mechanical Engineering, pp 185 190. SUPERVISIONS Master : Current 2014 (7 Students) Nur Asiah Kuzaiman (2014302029) - New Framework Model of Integrated Islamic Quality Manufacturing System in Food Industry (Main Supervisor). Argustina Zainuddin (2015267258) - Design and Development of Integrated Quality Management Model based on TQM, LM, EMS and Energy Management System in Malaysian Automotive Companies (Main Supervisor). Abu Bakar Rahim (2014345487) Implementing Lean Manufacturing System in Malaysian Second Tier Automotive Parts Company (Main Supervisor). Mohd. Arifhakim Azizan(2014149351) Functionally Graded Aluminium Foam (Co- Supervisor). Fazlina Ismail (201360442) Kanban System in Malaysian Automotive Company (Main Supervisor). Nur Syahirah Sapie (2012320651) The Effectiveness of Bill of Material in Reduction of Scrap Raw Material (Main Supervisor). Siti Haizun Ali (2014275766) - Implementation of Lean Practices In Slitting Process For Capacitor Products In Panasonic Industrial Devices Malaysia Sdn Bhd (Pidmy) (Main Supervisor). Degree: Current 2014 Semester: Sept 2014 Jan 2015 (7 Students) Hanisah Awang (2012439956) Improving Time Management Service for Malaysia Airlines System: Case Study at Sultan Mahmud International Airport. Luqman Hadi Azahar (2011205302) Kanban Kitting System at Proton Sdn. Bhd.
Degree: Current 2014 Semester: September 2014 January 2015 (7 Students) Norleena Mohd Noorlan (2012693596) Case Study on Line Balancing at Engine Transmission Line in Proton Sdn. Bhd. Engku Fatin Hazirah Engku Mohd Suhaimi (2011849394) Design and Development of Computerized PFMEA in UMW Toyota. Hadriyudin Baharudin (2011880654) Design and Development of Preventive Maintenance of Mechanical Asset in Building Management System in Istana Negara. Nasyitah Adnan (2011212556) Design and Development of Computerized Kanban in UMW Toyota. Nur Amalina Muhamad Alim (2011214778) Design and Development of Computerized Customer Handling System in UMW Toyota. Semester: Current - March 2015 (16 Students) Nurfaezah Mohd Hassim (2012248558) Case Study: One Piece Flow at The Installation Line for Custom Made Car Seat Company - DK Leather Seats Sdn. Bhd. Qistina Adith Khairul Fauzi (2012540801) Case Study on The Improvement of Productivity on A Sewing Line at An Automotive Industry- DK Leather Seats Sdn. Bhd. Asyraf Azizi Mohd Safri (2011534743) Development of Comprehensive Monozukuri Machine of Spreading Fabric at DK Leather Seats Sdn. Bhd. Muhammad Azri Mustakim (2010707801) The Study on Optimization of Streamlined Process Flow in a Production System at DK Leather Seats Sdn. Bhd. Luqman Ahmad (2011715267) Study and Development of In-House Supply Chain Management within Upholstery Production System at DK Leather Seats Sdn Bhd. Abdul Hakim Amir Zulkepli (2013896962) Implementation of Takt Production on Reducing Waste with LPS at Suria Components Sdn.Bhd. Mohamad Aideed Mohamad Razali (2012863662) Implementation of Work- In- Progress (WIP) and Time Reduction with Lean Production System at Suria Components Sdn.Bhd. Owais Qarni Qusham (2013611632) Design and Development of Computerized Process Flow of Human Resource Management in An Automotive Company DK Leather Seats Sdn. Bhd. Kamarul Arifin Suhaimi (2011187557) Design and Development of Computerized ISO17025 Management System. Degree: Current 2014 Semester: Current - March 2015 Khairul Ikhwan Khairul Salleh (2013424396) Investigation of Instrument Cluster Assembly Line in Malaysia Automotive Industry Continental Tyres Penang. Nur Atiqah Suhaimi (2012418842) Design and Development of Lean and OHSAS Management in Palm Oil Factory Sime Darby Plantation. Muhammad Adi Asyraf Azrai (2012437718) Leather Yield Improvement in DK Leather Seat Sdn. Bhd (Co- Supervisor). Mohammad Syafiq Rosli (2012885266) Design and Fabrication of Plaque by Hot Pressing and Using Waste Plastic Material (Co-Supervisor). Muhammad Syakir Abdul Rahim (2012488768) Production and Market Study of FKM Product : Keris Envelope Opener (Co-Supervisor). Muhammad Farhan Bin Mohd Suhaimi (2013578919) - Improvement On The Cutting Tools Inventory Management Control System Case Study in HPMT Sdn. Bhd. Muhammad Syahmi Bin Shahar (2013562223) - A Study Of Solid Carbide Endmill Cutting Edge Radius in HPMT Sdn. Bhd.
Attended Course Talent Accelerated Leadership Excellent Series (Tales) (2016), Latihan Pengurusan Sistem Jurnal Malaysia (2016), Entrepreneur Series Talk How To Start-Up New Business (2015), Cake PHP for Systems Development (2015), Microsoft Words for Academic (2015), Power Point for E-Content Development (2015), Kursus Asas Pengajaran dan Pembelajaran (2015), Internal Audit Course for ISO17025 (2014), Measurement Uncerrtainty ISO 17025 (2014), Delmia Quest Simulation Software (2011), Minitab Version 16 (2011), Creative Teaching Skill (2009), Counseling Skill (2009 & 2008),Essential Skill as QA/QC Manager(2008), The 12 Ladders to World Class Performance (2008), Safety Talk (2008), Understanding and Documenting OHSAS 18001:2007 (2007), Leadership Skills for Junior Leaders (2007), Train the Trainer (2007), Quality Improvement Team (2007), Lean Enterprise (2007), Leadership Communication (2007),Work Methods Improvement (2007), Lead Auditor Training for ISO/TS 16949:2002 and ISO 14001:2004 (2006), ISO/IEC 17025:2005 Documentation & Implementation (2006), 5S Convention Improving Delivery System with 5S (2006), Lean Office Management (2006), Innovative and Creative Circle (2006), Understanding Measurement and Calibration System (2006),Gauges Repeatability & Reproducibility Studies (2006), Injection Moulding Process (2005), Lean Office (2006), 7 Habits of Highly Effective People by Stephen R.Covey (2003), Executive Development Programme Project Management, Marketing Management and Basic Financial Skills, Mind Mapping by Tony Buzan, Public Speaking Creative and Critical Thinking & Debating (2003), Vehicle Integration Training with LOTUS Engineering(2003), AUTOCAD (2005), CATIA Training (2004), Finite Mode Effect Analysis (2003), AUTOCAD Mechanical Training (2002). REFERENCES Name : Prof. Dr. Salmiah Kasolang Name : Assoc. Prof. Dr. Nor Hayati Saad Telephone No. : 03-5543 5159 Telephone No : 03-5543 5150 Email : salmiahk@salam.uitm.edu.my/ Email : norhayatisaad@salam.uitm.edu.my salmiahk@gmail.com Position/ Company : Deputy Dean (Academic), Position/ Company: Dean Faculty of Mechanical Faculty of Mechanical Engineering, Engineering, UiTM Shah Alam, Selangor, Malaysia. UiTM Shah Alam, Selangor, Malaysia.