EHP-Electro Proportional Joystick Controls

RT 7

(offsettable) EHP-Electro Proportional Joystick Controls

RT 7 SERIES Rough Terrain Cranes FEATURES tons (68.2 mt) maximum lifting capacity 6 ft. (38.4 m) maximum boom length 134 ft. (.8 m) maximum tip height 2 horsepower engine Electro Proportional Joystick Controls Swingaway jib offsettable to 0º, º or º Two-speed main and auxiliary winches Quick reeving boom head and hook block Fully independent multi-position out and down outriggers Environmental operator s cab optimizes load visibility and productivity RCI 5 load system Rated Capacity Indicator month or 2,000 hour crane warranty and 5 year or,000 hour warranty on major weldments Machines shown may have optional equipment

RT 7 Series - ton Rough Terrain Crane 6 ft (38.4 m) FOUR SECTION, FULL POWER WITH FOOT PEDAL CONTROL High strength, four plate construction welded inside and out with embossed side plate holes to reduce weight and increase strength. Single boom hoist cylinder provides boom elevation of 4º to 78º for easier reeving changes and close radius operation. Quick reeving boom head; no need to remove wedge from socket. 3º house lock standard. ENVIRONMENTAL OPERATOR S CAB Rated Capacity Indicator (RCI) system including anti-two block system with automatic function disconnects. Deluxe six-way adjustable operator s seat has mechanical suspension and head and arm rests. Sound and weather insulated for comfort. Full power-shift transmission with integral torque converter; neutral safety start; 6 speeds forward and reverse. Hydraulic fourwheel power steering for 2- wheel, 4-wheel or crab steer. Split system air brakes on all four wheels (disc) Fully independent hydraulic outriggers may be utilized fully extended to 26 ft. (7.92 m), in their 1/2 extended position, or fully retracted. Tail Swing only 11.9 (3.62m) Standard Cummins QSB5.9 2 horsepower engine. (5 kw) Earthmover style 29. x 28 P.R. tires POWERFUL, TWO-SPEED WINCHES OPTIONS INCLUDE: 32 ft. or 33 to 57 ft. (9.68 or. to 17. m) swing-on jib. Both offset to 0º, º or º. Heater/Defroster, air conditioner for operator s cab. Auxiliary winch with rope. Work lights. Cold weather kit for cab. Independent rear wheels steering. Removable front window, hinged tinted glass skylight, and sliding righthand window. 489 fpm (149.0 m/min) maximum line speed, 18,4 lbs. (8369 kg) maximum line pull. Armrest mounted control. AM/FM cassette radio. Armrest mounted dual axis controls for winch(s), swing, and boom elevation; foot control pedals for swing brake, boom telescope, and throttle. Complete instrumentation. Environmentally-sealed rocker switches. Circuit breakers in cab. Integral automatic brake. Electronic drum rotation indicators. Winch drum rollers, tapered drum flanges. HIGH CAPACITY, DEPENDABLE HYRAULIC SYSTEM Terex reserves the right to amend these specifications at any time without notice. The only warranty applicable is our standard written warranty applicable to the particular product and sale. We make no other warranty, expressed or implied. RUGGED, EASY-TO-MANEUVER CARRIER Box-type chassis construction with reinforcing cross members. Chassis is Terex designed and built with 4x 4 X 4 drive. Three gear type pumps, one single and two in tandem, driven off the transmission. Combined system capability is 1 gpm (4 lpm). Includes pump disconnect on tandem pump. Hydraulic reservoir with 174 gal. (674 L) capacity and full flow oil filtration system. Waverly Operations 6 th Street S.E. Waverly, IA 677-9466 USA Phone: (319) 2-39 Fax: (319) 2-9395 email: inquire@terexwaverly.com web: http://www.terex-cranes.com For more information, product demonstration, or details on purchase, lease and rental plans, please contact your local Terex Cranes Distributor. Terex Cranes Inc. 03 T74-03

STANDARD UPPERSTUCTURE EQUIPMENT UPPERSTRUCTURE FRAME All welded one-piece structure fabricated with high tensile strength alloy steel. Counterweight is bolted to frame. TURNTABLE CONNECTION Swing bearing is a single row, ball type, with internal teeth. The swing bearing is bolted to the revolving upperstructure and to the carrier frame. SWING A hydraulic motor drives a double planetary reduction gear for precise and smooth swing function. Swing speed (no load) is 2.2 rpm. SWING BRAKE Heavy duty multiple disc swing brake is mechanically actuated from operator's cab by foot pedal. Brake may be locked on or used as a momentary brake. A 3 o house mechanical house lock is standard. RATED CAPACITY INDICATOR Rated Capacity Indicator with visual and audible warning sys-tem and automatic function disconnects. Second generation pictographic display includes: boom radius, boom angle, boom length, allowable load, actual load, and percentage of allowable load registered by bar graph. Operator settable alarms provided for swing angle, boom length, boom angle, tip height, and work area exclusion zone. Anti-two block system includes audio/visual warning and automatic function disconnects. OPERATOR'S CAB Environmental cab with all steel construction, optimum visibility, tinted safety glass throughout, and rubber floor matting is mounted on vibration absorbing pads. The cab has a sliding door on the left side, framed sliding window on the right side, hinged tinted all glass skylight and removable front windshield to provide optimum visibility of the load open or closed. Hot air defroster keeps windshield clear. Acoustical foam padding insulates against sound and weather. The deluxe six-way adjustable seat is equipped with a mechanical suspension and includes head and arm rests. CONTROLS Armrest mounted dual axis controls for winch(s), swing, and boom elevation. Winch rotation indication incorporated into control handles. Armrest swings up to improve access and egress. Vernier adjustable hand throttle included. Steering column mounted turn signal, wiper, and shift controls. Switches include ignition, engine stop, lights, horn, roof window wiper, defroster, steering mode, parking brake, outriggers, 3 o house lock, etc. Horn and winch speed shift switches are mounted in the levers. Foot control pedals include swing brake, boom telescope, service brake, and accelerator. RT 0 SERIES Rough Terrain Crane Specifications INSTRUMENTATION AND ACCESSORIES In-cab gauges include air pressure, bubble level, engine oil pressure, fuel, engine temperature, voltmeter, transmission temperature, and transmission oil pressure. Indicators include low air, high water temperature, low oil pressure, high transmission temperature, and low coolant level audio/visual warning, hoist drum rotation indicator(s), and Rated Capacity Indicator. Accessories include fire extinguisher; light package including headlights, tail light, brake lights, directional signals, four-way hazard flashers, dome light, and back-up lights with audible back-up alarm; wind-shield washer/wiper; skylight wiper; R.H. and L.H. rear view mirrors; dash lights; and seat belt. Circuit breakers protect electrical circuits. HYDRAULIC CONTROL VALVES Valves are mounted on the rear of the upper structure and are easily accessible. Valves have electric/hydraulic operators and include one pressure compensated two spool valve for boom elevation and telescope. One pressure compensated two spool valve for main and auxiliary winch, and one single spool valve for swing. System provides for simultaneous operation of all crane functions. High pressure regeneration feature provides 2-speed boom extension. Quick disconnects are provided for ease of installation of pressure check gauges. OPTIONAL EQUIPMENT Auxiliary Winch Single axis armrest mounted controllers LP Heater/Defroster Hydraulically powered Air Conditioner with or without hydraulic heater Diesel Heater/Defroster Work Lights Rotating Beacon STANDARD CARRIER EQUIPMENT CARRIER CHASSIS Chassis is Terex designed with four-wheel drive and four-wheel steer (4X4X4). Has box-type construction with reinforcing cross members, a precision machined turn table mounting plate and integrally welded outrigger boxes. Decking has anti-skid surfaces, including between the frame rails, a lockable front tool storage compartment, and access steps and handles on the left and right sides and on all four corners. Lights are recessed into the outrigger boxes for protection. Air reservoir drains are collected in an easily accessible central location. AXLES AND SUSPENSION Rear axle is a planetary drive/steer type with.5 in (0.26m) of total oscillation. Automatic oscillation lockouts engage when the superstructure is swung o in either direction. Front axle is a planetary drive/steer type, rigidly mounted to the frame for increased stability. STEERING Hydraulic four-wheel full power steering for two-wheel, four-wheel coordinated, or four-wheel crab steer is easily controlled by steering wheel. A rear axle centering light is provided. Turning radius Curb clearance (to CL of outside tire.) Radius Two-wheel: 41' 7" (.7 m) 43' 2" (13.2 m) Four-wheel: 22' " (7.0 m) 24' 7" (7.5 m) TRANSMISSION Range shift type power-shift transmission with integral torque converter provides 6 speeds forward and 6 speeds reverse with neutral safety start. Four wheel drive engages automatically with low range and two wheel drive with high range. A remote mounted oil filter provides easy access. Automatic pulsating back-up alarm.

STANDARD CARRIER EQUIPMENT cont d MULTI-POSITION OUT & DOWN OUTRIGGERS Fully independent hydraulic outriggers may be utilized fully extended to 24 ft. (7.32 m) centerline to centerline, in their ½ extended position, or fully retracted for maximum flexibility. Easily removable 24" diameter Almag floats, each with an area of 2 in 2 (2919 cm 2 ), stow on the outrigger boxes at their point of use. Complete controls and a sight leveling bubble are located in the operator's cab. WHEELS & TIRES Disc type wheels with full tapered bead seat rim. 7.56 in (4.0 m) wheelbase. TIRES Wide earthmover (E3) style tread tires provide life and flotation. 29.x, 28 P.R. - std. SERVICE BRAKES Split system air over hydraulic 18.5" (4 mm) diameter disc dual caliper brakes on all wheels-. PARKING BRAKE Electrically controlled front axle mounted spring-set, air released drum type parking brake with indicator light. OPTIONAL EQUIPMENT Immersion Heater Pintle Hook Clearance Lights Independent Rear Wheel Steer Four Mode Rear Wheel Steer,000 lb line pull front mounted winch. HYDRAULIC SYSTEM HYDRAULIC PUMPS Three gear type pumps, one single and two in tandem, driven off the transmission. Combined system capability is 1 gpm (4 lpm). Includes pump disconnect on winch pump. Main and Auxiliary Winch Pump 57.8 gpm (218.8 lpm) @ 4,0 psi (316.4 kg/cm 2 ) Boom Hoist, Telescope Pump 42.1 gpm (9.4 lpm) @ 4,0 psi (316.4 kg/cm 2 ) Power Steering, Outrigger and Swing Pump.2 gpm (76.5 lpm) @ 3,0 psi (246.1 kg/cm 2 ) FILTRATION Full flow oil filtration system with bypass protection includes a removable mesh (0 micron) suction screen-type filter and 5 micron synthetic depth type media replaceable return line filter. HYDRAULIC RESERVOIR All steel, welded construction with internal baffles and diffuser. Provides easy access to filters and is equipped with an external sight level gauge. The hydraulic tank is self pressurizing to aid in keeping out contaminants and in reducing potential pump cavitation. Capacity is 178 gal (674 liters). Hydraulic oil cooler is standard. All performance data is based on a gross vehicle weight of 94,898 lbs (43 0 kg), 29.5x tires, 4x4 drive. Performance may vary due to engine performance. Gradeability data is theoretical and is limited by tire slip, machine stability, or oil pan design. MAIN WINCH SPECIFICATIONS Hydraulic winch with bent axis piston motor and planetary reduction gearing provides 2-speed operation with equal speeds for power up and down. Winch is equipped with an integral automatic brake, grooved drum, tapered flanges, standard cable roller on drum, and an electronic drum rotation indicator. PERFORMANCE LO-RANGE HI-RANGE Max. line speed (no load) First Layer 191 fpm 9 m/min) 341 fpm (3.9 m/ min) Fifth layer 2 fpm (83.8 m/min) 489 fpm (149.0 m/min) Max. line pull-first layer 18,4 lbs (8 369 kg) 9,002 lbs (4 083 kg) Max. line pull-fifth layer,8 lbs (5 826 kg) 6,267 lbs (2 843 kg) DRUM DIMENSIONS 13.00 in (3 mm) drum diameter.16 in (5 mm) length 21.5 in (546 mm) flange dia. Cable: ¾" x 0 ft (19 mm x 182.9 m) Cable type:¾" (19mm) 6x19 IWRC, XIPS, right regular lay, preformed. Min breaking strength 29.4 tons (26.6 mt) DRUM CAPACITY Max. Storage: 561 ft (171.0 m) Max. Useable: 561 ft (171.0 m) * * Based on minimum flange height above top layer to comply with ANSI B.5 OPTIONAL AUX. WINCH Hydraulic 2-speed winch with bent axis piston motor, equal speed power up and down, planetary reduction with integral automatic brake, grooved drum with tapered flanges, drum roller, and rotation indicator. PERFORMANCE Max. line speed (no load) Fifth layer 489 fpm (149.0 m/min) Max. line pull First layer 18,4 lbs (8 369 kg) DRUM DIMENSIONS AND CAPACITY (Same as main winch) OPTIONAL HOIST LINE MAIN WINCH AND OPTIONAL AUXILIARY WINCH ¾" (19mm) rotation resistant compacted strand 34x7 Grade 19. Min breaking strength 34.5 tons (31.7 mt). ENGINE SPECIFICATONS PERFORMANCE Transmission Forward Gear Drive Maximum Speed Maximum Tractive Effort Maximum Gradeability @ Stall 1 4-wheel 2.1 mph (3.4 kph) 68,6 lbs(31, 137 kg) 98.9% 2 4-wheel 4.4 mph (7.1 kph) 33,0 lbs (14,991 kg) 34.8% 3 4-wheel.3 mph (19.8 kph) 11,792 lbs (5,349 kg).5% 4 2-wheel 5.4 mph (8.4 kph) 27,777 lbs (, 599 kg) 28.3% 5 2-wheel 6 2-wheel.9 mph (17.5 kph).0 mph (.8 kph) Cummins QSB 5.9-2 Type 6 cylinder Bore and Stroke 4.02 x 4.72 in (2x1 mm) Displacement 9 cu in (5.9 l) Rated HP 2 hp (5 kw) @ 00 rpm Maximum Gross HP 2 hp (5 kw) @ 20 rpm Maximum Gross Torque 7 lb ft (990 N m) @ rpm Aspiration turbocharged & charge air cooled Air Filter dry type Electrical System volt Alternator 2 amp Battery (2) V-1900 CCA Fuel Capacity 80 US gallons (4 L.) 13, 3 lbs (6,067kg).2% 4,768 lbs (2,163 kg) 3%

Terex Cranes, Inc 04 Litho in U.S.A.

Lifting Capacities Pounds ( 6 boom) CAUTION: Do not use this specification sheet as a load rating chart. The format of data is not consistent with the machine chart and may be subject to change. ON OUTRIGGERS - RETRACTED AND WITH,0 LBS. COUNTERWEIGHT LENGTH FT LENGTH 54 FT LENGTH 66 FT LENGTH 78 FT ANGLE ANGLE ANGLE ANGLE (DEG) 3 (DEG) 3 (DEG) 3 (DEG) 3 REF. (LB) REF. (LB) REF. (LB) REF. (LB) 69.4 84,0.0 85,0 66.2 59,0 72.8,0 61.3 39,0 69.3,0 73.3,900 52.3 23,0 63.4 24,0 68.6 24,900 72.1,0 42.0,000 57.1 16,0 63.8 16,0 68.1 16,900 28.5 9,900.3 11,000 58.7 11,0 64.0 11,900 ** 42.6 7,0 53.3 8,0 59.8 8,0 33.6 5,0 47.7 5,0.3 6,000 21.0 3,0 41.1 3,800.6 4,0 ** MAXIMUM CAPACITY AT 0 DEGREE ANGLE LENGTH LENGTH LENGTH LENGTH FT 54 FT 66 FT 78 FT 3 3 3 3 (LB) (LB) (LB) (LB) 33.9 7,000 COUNTERWEIGHT: W/AUX. WINCH 13,6 LBS. W/O AUX. WINCH,0 LBS. LENGTH -6 FT. OUTRIGGER SPREAD 24 FT. USE THESE CHARTS WHEN ALL OUTRIGGER BEAMS ARE NOT IN EITHER THE MID OR FULLY EXTENDED POSITION MODEL RT 7 STABILITY PCT. ON OUTRIGGERS 85% ON TIRES % PCSA CLASS -316 ON OUTRIGGERS - RETRACTED AND WITH,0 LBS. COUNTERWEIGHT LENGTH 90 FT LENGTH 2 FT LENGTH 114 FT LENGTH 6 FT ANGLE ANGLE ANGLE ANGLE (DEG) 3 (DEG) 3 (DEG) 3 (DEG) 3 REF. (LB) REF. (LB) REF. (LB) REF. (LB) 74.6,0 71.2 17,0 73.5 17,0 67.7,0.5,0 72.6,0 64.2 8,0 67.5 8,0.0 8,900 72.0 9,000.6 6,0 64.3 6,0 67.2 6,0 69.5 6,0 56.8 4,0 61.1 4,0 64.5 4,0 67.1 4,800 61.6 3,0 64.5 3,0 ** MAXIMUM CAPACITY AT 0 DEGREE ANGLE LENGTH LENGTH LENGTH LENGTH 90 FT 2 FT 114 FT 6 FT 3 3 3 3 (LB) (LB) (LB) (LB) 4

Lifting Capacities Pounds ( 6 boom) CAUTION: Do not use this specification sheet as a load rating chart. The format of data is not consistent with the machine chart and may be subject to change. COUNTERWEIGHT: W/AUX. WINCH 13,6 LBS. W/O AUX. WINCH,0 LBS. LENGTH -6 FT. OUTRIGGER SPREAD 24 FT. MODEL RT 7 STABILITY PCT. ON OUTRIGGERS 85% ON TIRES % PCSA CLASS -316 SIDE STOW JIB ON FULLY EXTENDED OUTRIGGERS AND WITH,0 LBS. COUNTERWEIGHT ED ANGLE (DEG) 77 73 71 68 62 59 51 47 43 38 32 ED ANGLE (DEG) 77 73 71 68 62 59 51 47 43 38 32 32 FT OFFSETABLE JIB/NO PULL OUT INSTALLED 0 OFFSET OFFSET OFFSET (REF) (REF) (REF) FRONT FRONT FRONT ONLY 3 ONLY 3 ONLY 3 (LB) (LB) (LB) (LB) (LB) (LB) 41,0*,0* 8,0* 8,0* 57 6,0* 6,0* 46 11,900* 11,900* 8,0* 8,0* 61 6,0* 6,0* 51 11,0* 11,0* 7,800* 7,800* 66 6,0* 6,0* 57,0*,0* 66 7,0* 7,0* 71 6,000* 6,000* 9,0* 9,0* 73 7,0* 7,0* 78 5,900* 5,900* 73 8,900* 8,900* 80 6,800* 6,800* 85 5,0* 5,0* 80 8,0* 8,0* 87 6,0* 6,0* 92 5,0* 5,0* 87 7,0* 7,0* 94 6,0* 6,0* 98 5,0* 5,0* 96 7,000* 6,0 2 5,900* 5,900* 6 5,0* 5,0* 4 5,800 5,0 1 5,0 5,0 113 5,000* 5,000* 1 4,800 4,0 116 4,0 4,0 119 4,0 4,0 119 4,0 3,0 3 3,900 3,0 1 3,0 3,0 6 3,0 3,000 1 3,0 2,900 131 3,000 2,0 134 2,0 2,0 137 2,0 2,0 137 2,0 1,900 141 2,0 1,0 142 2,000 1,0 SIDE STOW JIB ON FULLY EXTENDED OUTRIGGERS AND WITH,0 LBS. COUNTERWEIGHT 57 FT OFFSETABLE JIB 0 OFFSET OFFSET OFFSET (REF) (REF) (REF) FRONT FRONT FRONT ONLY 3 ONLY 3 ONLY 3 (LB) (LB) (LB) (LB) (LB) (LB) 48 6,0* 6,0* 66 4,0* 4,0* 3,0* 3,0* 56 6,0* 6,0* 72 4,0* 4,0* 81 3,0* 3,0* 63 6,0* 6,0* 77 4,0* 4,0* 87 3,0* 3,0* 6,0* 6,0* 83 4,000* 4,000* 92 3,0* 3,0* 80 5,0* 5,0* 91 3,800* 3,800* 0 3,000* 3,000* 90 5,000* 5,000* 99 3,0* 3,0* 8 2,900* 2,900* 98 4,0* 4,0* 6 3,0* 3,0* 1 2,800* 2,800* 6 4,0* 4,0* 114 3,0* 3,0* 1 2,0* 2,0* 116 3,900* 3,900* 3 3,000* 3,000* 9 2,0* 2,0* 1 3,0* 3,0* 132 2,900* 2,900* 137 2,0* 2,0* 133 3,000 2,900 1 2,800* 2,0 143 2,0* 2,0* 1 2,0 2,0 147 2,0 2,0 149 2,0 2,0 148 1,900 1,0 4 1,800 1,0 1 1,800 1,0 7 1,0 1,0 161 1,0 1,0 162 1,0 1,0 1 900 MAXIMUM PERMISSIBLE HOIST LINE LINE PARTS MAIN & AUX. HOIST 33 FT OFFSETABLE JIB/PULL OUT RETRACTED 0 OFFSET OFFSET OFFSET (REF) (REF) (REF) FRONT FRONT FRONT ONLY 3 ONLY 3 ONLY 3 (LB) (LB) (LB) (LB) (LB) (LB) 41,0*,0* 8,0* 8,0* 57 6,0* 6,0* 47,0*,0* 56 8,0* 8,0* 62 6,0* 6,0* 52 11,0* 11,0* 61 7,900* 7,900* 67 6,0* 6,0* 58 11,000* 11,000* 67 7,0* 7,0* 72 6,000* 6,000* 66,000*,000* 74 7,0* 7,0* 79 6,000* 6,000* 74 9,0* 9,0* 81 6,800* 6,800* 86 5,0* 5,0* 81 9,000* 8,0* 88 6,0* 6,0* 93 5,0* 5,0* 88 7,0* 7,0 95 6,0* 6,0* 99 5,0* 5,0* 97 6,0 5,800 3 5,800 5,0 7 5,0* 5,0 5 5,0 4,0 111 4,800 4,0 114 4,0 4,0 113 4,0 3,0 117 3,900 3,0 1 3,0 3,0 1 3,0 3,000 4 3,0 2,800 6 2,900 2,900 7 2,0 2,0 131 2,0 2,0 132 2,0 2,000 1 2,000 1,0 138 1,800 1,0 138 1,0 1,0 143 1,0 144 1,0 ED ANGLE (DEG) 77 73 71 68 62 59 51 47 43 38 32 NOTES FOR JIB CAPACITIES A. For all boom lengths less than the maximum with a jib erected, the rated loads are determined by boom angle only in the appropriate column. ON TIRES 80 MAX LENGTH 54 54 54 66 66 66 78 78 78 90 90 90 29.5 X -28PR STATIONARY PICK & CARRY STATIC CREEP 2.5 MPH 3 STRAIGHT OVER FRONT 48,000 74,0* 56,0* 47,0*,0,0* 49,0* 41,000*,0 54,0,900* 34,000*,0 36,0 31,0*,0* 13,800,000 24,800*,000* 9,0 18,0 18,0,0* 6,0 14,0 14,0 13,900* 5,000 11,0 11,0 11,0* 3,0 9,0 9,0 9,0* 2,0 8,000 8,000 8,000 1,0 6,0 6,0 6,0 5,000 5,000 5,000 3,0 3,0 3,0 3,0 3,0 3,0 2,800 2,800 2,800 2,0 2,0 2,0 1 2 3 4 5 6 7 8 9 11 13,800 27,0 41,0,0 69,000 82,800 96,0 1,0 4,0 138,000 1,000 ED ANGLE (DEG) 77 73 71 68 62 59 51 47 43 38 32 B. For boom angle not shown, use the capacity of the next lower boom angle. C. Listed radii are for fully extended main boom only. NOTES FOR ON TIRE CAPACITIES A. For Pick and Carry operations, boom must be centered over the front of the crane with swing brake and lock engaged. Use minimum boom point height and keep load close to ground surface. B. The load should be restrained from swinging. NO ON TIRE OPERATION WITH JIB ERECTED. C. Without outriggers, never maneuver the boom beyond listed load radii for applicable tires to ensure stability. D. Creep speed is crane movement of less than 0 Ft. (61m) in a minute period and not exceeding 1.0 mph (1.6 km/h). E. Refer to General Notes for additional information. WIRE ROPE: 3/4" ROTATION RESISTANT 34 x 7 COMPACTED STRAND, GRADE 21, MINIMUM BREAKING STRENGTH - 34.5 TONS. WEIGHT 1.24 LBS./FT. 3/4" 6 X 19 OR 6 X 37, IPS, IWRC, PREFORMED RIGHT REGULAR LAY MINIMUM BREAKING STRENGTH -.6 TONS. WEIGHT 1.04 LBS/FT. RECOMMENDED TIRE PRESSURE TIRE SIZE STATIONARY CREEP 2 1/2 MPH TRAVEL 29.5 X -28 PR 62 PSI 62 PSI 62 PSI 54 PSI 5