Product Guide January 2011
2 table of content fixed ProDUctS Shower seats.................... 6 Grabrails Ergogrip................ 10 ProGrip...................... 13 back-up...................... 13 fixed & Hinged arm supports......... 14 bathroom accessories............. 18 miscellaneous products............. 21 Washbasin products............... 22 Shower stretchers................ 23 mobile ProDUctS Shower trolleys.................. 23 Shower and toilet chairs............ 25 Shower chairs.................. 28 Swimming pool products............ 30 toilet seat..................... 31 USEfUL information technical information.............. 33 mounting advice................. 34
3 Introduction Dear reader, On January 1st 2011 Linido will change its name to Handicare. We have been part of the Handicare group since 2008 and believe that the time is right for us to join our colleagues who have already changed their name to Handicare. The Linido Green will be replaced with Handicare Orange in our brochures, we will put a new sign on our building and our email addresses will change. But these changes are only on the outside. Our core strengths remain the same: our expert team will continue to deliver the same high quality bathroom safety solutions that you expect from them. We are pleased present our Product Guide 2011, containing the product series from Handicare. Despite the new look, we are sure this brochure will feel very familiar because our product range remains unchanged! Our core values place our focus on the user, making sure that they are the foundation of all our product developments, and these key values remain unchanged. Safety is achieved by choosing the right safety products. Linido not only offers a comprehensive choice but also guarantees that products meet stringent requirements with regard to their strength, as well as having high weight limits. You can therefore fully trust all our sanitary safety products. Practicality Our products are extensively tested for their functionality. Our designs are based on the support that the end user needs. Helping the user to rise from a toilet as well as offering the possibility to shower sitting down are good examples of this. Durability In the bathroom or in wet room environments, products are often exposed to demanding conditions, e.g. moisture, cold, heat. By chemical pre-treatment, using epoxy coating, stainless steel and plastic materials, a long lasting service life is guaranteed for the user. Ergonomics At Linido, ergonomic aspects like seat height, seat width, seat depth, seat angle and arm rest shape play an important role in the product design. Therefore we product develop from the dimensions and natural movements of the human body. For example, our grab rail Ergogrip is designed to a 60º angle instead of the traditional 90º, so hand and wrist retain a natural position while holding the Ergogrip. Design Much attention is paid to the design of our products. Where possible round shapes are used, which is advantages from a hygienic point of view while at the same time having a pleasing, modern look. Fixing points are concealed and different colour options allow bathrooms to be arranged to suit individual styles and tastes. Would you like more information on our products or our core values? We are happy to help, please contact our Sales Department at +31 (0)15 369 54 40 or mail to info.ls@handicare.com. The Handicare Bathroom Safety team
4 GEnErAL LinidoSolutions from Handicare are safety products for use in the bathroom, shower and toilet areas. The underlying idea behind these products is to offer as much independence and safety as possible for the user whilst bathing or toileting whilst also considering for the comfort and safety of the carer when designing of LinidoSolutions. Our products are suitable for use in all private and public projects, from the home right up to major hospital developments. LinidoSolutions products are solely available through offi cial dealers who can support you with their professional service and advice. our website We recommend that you visit our website www.handicare.com regularly, where you will fi nd our latest product information, and mounting advice. our products material LinidoSolutions products are made of: coated steel, or glass fi bre reinforced nylon, or coated stainless steel 304, or polished stainless steel 304 (recommended with frequent use in institutions) colours Most LinidoSolutions products are available in polished stainless steel and in the following colours: Ral 9010 White Ral 9001 Cream-white Ral 3003 Red Ral 5002 Blue Ral 9005 Black Polished stainless steel with white guards Polished stainless steel with black guards With shower seats and shower/toilet chairs in polished stainless steel, the armrests are supplied with a white fi nish. With grab rails and hinged arm supports, made in polished stainless steel, it is possible to choose between white (standard) or black guards/wall plates. custom made products We would be pleased to advise on the supply of special sizes and designs of our products.
5 Double robe hook page 19 Angled grab rail 90 º - page 11 Soap dish page 17 Shower holder page 17 Toothbrush holder page 17 Towel rail page 19 Shower seat with backrest and armrests page 6
6 Shower seats Shower seat Li2201.200 plastic seat, hinged seat width mm seat depth 405 mm including drill jig fi xing mount available (LI2806.000) 405 Shower seat with backrest Li2202.200 plastic seat, hinged plastic back, reinforced by stainless steel tube seat width mm seat depth 405 mm including drill jig fi xing mount available (LI2805.000) Shower seat with backrest and armrests Li2203.200 plastic seat, hinged plastic back, reinforced by stainless steel tube independent swivel armrests, ergonomic shape seat width mm seat depth 405 mm including drill jig fi xing mount available (LI2805.000) distance between wall to front of seat in folded position: 170 mm (see drawing LI2202.200) 140 220 425 485 515 120 140 465 245 530 405 120 605 465 425 485 140 140 220 425 485 515 120 170 245 530 260 405 405 515 120 120 220! With a body weight >125 kg we advise to use a shower seat without armrests in combination with hinged arm supports (LI2603.3xx) at both sides. floorsupport set for nylon shower seats Li2214.201 fi ts Linido shower seats LI2201.200, LI2202.200, LI2203.200 hinges with the seat consists of double leg support and double distance arm smooth height adjustment to accommodate seat height (from fl oor to top of seat: 420-570 mm) can also be fi tted after installation! Recommended with a body weight > 100 kg dependant on the wall structure. 80 420-570 335
Shower seats 7 Shower seat with reduced seat depth Only available in these measurements. Floorsupport set available: LI2214.002. Li2203.001 seat HT-cover material, hinged backrest HT-cover material independent swivel armrests seat width mm seat depth 315 mm (distance from wall to front side seat 445 mm) Li2201.001 (not shown) as LI2203.001, without backrest and armrests (distance from wall to front side seat 375 mm) 625 Ø6.5 425 490 Ø10 20 525 665 260 21 505 415 315 445 175 205 140 165 Shower seat with soft toilet seat Floorsupport set available: LI2214.001 Li2223.021 hinged soft toilet seat with open front backrest HT-cover material independent swivel armrests, ergonomic shape rails for bedpan Ø 300-315 mm Li2221.021 (not shown) as LI2223.021, without backrest and armrests (distance from wall to front side seat 500 mm) 625 Ø6.5 Ø10 425 490 20 525 665 260 415 415 560 175 205 140 165 click-on frame for shower seat Li2216.001! can only be attached to the following Ergogrip grabrails: LI2611.060, LI2611.070, LI2611.080, LI2611.160, and to: horizontal angled grabrail LI2611.015; angled grabrail for two walls LI2611.016. with safety lock to secure to the grabrail suitable for shower seat LI2202.200 and LI2203.200 distance from grabrail to top side of seat: 475 mm frame of stainless steel tube easily mounted and removed on holding rails without tools Handicare advises the use of the fl oor support set LI2214.201 when using a click-on frame. 420 320 485 155 700 click-on frame for shower seat, height adjustable Li2216.002 as LI2216.001, but with variable sitting height adjusting range 100 mm space between grabrail and upper side seat: 400-500 mm Handicare advises the use of the fl oor support set LI2214.201 when using a click-on frame. The Click-on frame for shower seat is a winner in the Innovations Competition, at REHA CARE 2005 in Düsseldorf by the Research Institute for disabled aid technology (FTB).
8 Shower seats cushioned cover for shower seat Li09506.400 soft removable cushion, suitable for shower seats LI2201.200, LI2202.200, LI2203.200 cushion softer for a sensitive skin or longer use of the shower seat easy to fi x and change by means of velcro at the bottom of the seat Poly-ethylene-Poly-propylene foam. only in blue 530 420 Height adjustment system Li2215.101 can be used for shower seat without backrest LI2001.200 smooth adjustment to required seat height also allows mounting of shower seat at a later stage height adjustment 150 mm including drill jig set adjustable clamp levers available (LI2815.001) 505 70 45 365 Height adjustment system Li2215.102 can be used for shower seats with backrest LI2002.200, LI2203.200, LI2201.001, LI2203.001, LI2221.021 & LI2223.021 smooth adjustment to required seat height also allows mounting of shower seat at a later stage height adjustment 150 mm including drill jig set adjustable clamp levers available (LI2815.002) 50 45 70 365 800 505 Set backing plates Li0122.508 for fi xing Linido shower seat from rear of wall comes with nuts M8 welded on the plate and threaded studs, washers and nuts supplied with backing plate for shower seats with backrests backing plate visible at back side of the wall only in white 170 140 120 87 145 113 M8 150 130 425 465
Shower seats 9 Shower seat on console Li2244.000 hinged seat independent swivel armrests, ergonomic shape seat and backrest HT-cover material also available with a smooth height adjustment (LI2254.000), minimum seat height 400 mm, maximum seat height 570 mm 168 625 260 540 235 415 405 Ø10 470 900 100 80 160 200
10 Ergogrip grabrails All of the Ergogrip grabrails are of steel or Ø7,0 stainless steel tube and have a plastic fl ange with a plastic cover. As the tube is bent to 60 6 0 88 53 instead of the traditional 90, hand and wrist retain 75 a natural position while holding the Ergogrip. 92 7 In combination with the fl ange the Ergogrip has a smooth form which offers a fi rm grip. Grabrail Ergogrip Length = A B C Li2611.020 180 200 275 fi xing mount available (LI2807.000) 75 C B A Grabrail Ergogrip Length = A B C Li2611.030 300 317 405 Li2611.040 400 417 505 Li2611.050 500 517 605 Li2611.060 600 617 705 Li2611.070 700 717 805 Li2611.080 800 817 905 Li2611.090 900 917 1005 Li2611.100 1000 1017 1105 Li2611.120 1200 1217 1305 Li2611.140 1400 1417 1505 fi xing mount available (LI2807.000) 75 C B A Grabrail Ergogrip (with extra wall flange) Length = A B C Li2611.160 1600 1617 1705 Li2611.180 1800 1817 1905 Li2611.200 2000 2017 2105 75 C B A 145
Ergogrip grabrails 11 Horizontal angled grabrail Li2611.015 for two walls 760 600 angled grabrail for two walls Li2611.016 the vertical rail can be placed in any position to suit by means of the connection block plastic connection block only available in white 1155 1015 600 660 760 760 760 660 600 Vertical combination grabrail Li2611.017 can be combined with any grabrail Ergogrip, to provide the ideal convenient position combined with a shower holder (LI2630.200) this combination grabrail also makes a sturdy shower rail! plastic connection block only available in white 1145 1015 1105 930 angled grabrail 90 degrees a: Li2611.003 b: Li2611.004 recommended for mounting in bath and shower situations combined with a shower holder (LI2630.200) this grabrail also makes a sturdy shower rail! 1000 930 1110 a b 500 580
12 Ergogrip grabrails angled grabrail 45 degrees a: Li2611.007 b: Li2611.008 recommended for mounting beside toilet or bath 200 255 b a 200 255 400 455 400 455 Grabrail for stair newel a b a: Li2611.011 b: Li2611.012 for two walls (inner corner) 550 510 550 510 70 50 Grabrail for doorframe Length = A B C D Li2619.030 300 280 240 215 Li2619.045 430 390 365 Li2619.060 600 580 540 515 the small fl ange makes this extremely suitable for mounting on doorframes diameter tube 22 mm only available in these measurements only in white D C B A 100 30 13 backing plate Li0126.503 for fi xing Ergogrip from rear of wall comes complete with nuts M6 welded on the plate and threaded studs, washers and nuts backing plate visible at back side of the wall only in white 80 52 M6 150 140
13 ProGrip Li4026.001 ProGrip, right Li4026.002 ProGrip, left assistance for moving from toilet and seat situations offers support to the fore-arm, during the entire movement from sitting to standingup, and standup to sitting down promotes and increases independence while in moving to and from the toilet ergonomic design polyurethane foam with aluminium fi xing 110 215 40 100 for more information, please visit www.handicare.com 90 125 30 178 Phase 1: bend moment The center of gravity of the body is being moved/brought forward Phase 2: transfer moment Controlling balance plays an essential role Phase 3: extension Muscular strength from several parts of the body is being activated Phase 4: stabilization Support is available to maintain standing Phase 1 Phase 2 Phase 3 Phase 4 back-up Li4027.000 back-up offers support in the back while standing in the shower offers support during actions which require use of both hands (e.g. washing hair or drying) and turning on the spot ergonomic design, follows the natural curves of the body polyurethane foam with aluminium fi xing can be used as both right and left version offers space for placing bath product 125 170 95 140 100 395 270 130 550 145 min.30mm min. 140mm
14 fixed & hinged arm supports fixed arm support Li2601.050 length 500 mm Li2601.060 length 600 mm Li2601.070 length 700 mm Li2601.080 length 800 mm Li2601.090 length 900 mm fi xing mount available (LI2806.000) 500 / 600 / 700 / 800 / 900 135 Ø10 100 79 160 200 Hinged arm support Li2603.350 length 530 mm Li2603.360 length 600 mm Li2603.370 length 700 mm Li2603.380 length 800 mm Li2603.390 length 900 mm locks automatically in the upright position plastic wall plate with tube of coated steel, coated stainless steel or polished stainless steel fi xing mount available (LI2806.000) 215 530 / 600 / 700 / 800 / 900 105 135 110 79 floor console for hinged arm support Li2608.000 recommended when wall mounting of the hinged arm support is not possible or desirable including backing plate and aluminium clamps for mounting of hinged arm support once mounted on the fl oor console the hinged arm support can be readjusted 25 60 max. 860 60 1000 160 200 Ø10 (4x) 80 100 front support Li2609.200 applicable as front support or as fi xation in combination with two fi xed arm supports (LI2601.0xx) or two hinged arm supports (LI2603.3xx) can be fi tted in new and existing situations depth adjustable, lock on one side foam with ergonomic shape; washable, resistant to heavy use easy to assemble 750 440 170 183 250 Ø8,6 50 70 630-690
fixed & hinged arm supports 15 Polyurethane foam armrest Li2610.001 fi ts all LinidoSolutions hinged arm supports (LI2603.3xx) and fi xed arm supports (LI2601.0xx) including adhesive only in black 60 30 350 floorsupport set for hinged arm support Li2614.300 recommended if there is any doubt about the strength of the wall consists of adjustable fl oor support, clamps and distance stay smooth height adjustment for hinged arm support with height from fl oor to top of support from 700 mm to 850 mm can also be fi tted after installation of the hinged arm support (LI2603.3xx) Not applicable on LI2603.350 265 700-850 Height adjustment system for hinged arm support Li2615.300 smooth height adjustment to required height of support can be used for hinged arm supports LI2603.3xx allows mounting of hinged arm at a later stage range in adjustment 150 mm set adjustable clamp levers available (LI2815.001) 125 50 365 backing plate Li0126.501 for fi xing hinged arm support from rear of wall comes complete with welded nuts M8 and matching threaded studs, washers and nuts backing plate visible at back side of the wall only in white 210 183 105 79 M8 150 130
16 fixed & hinged arm supportsi toilet roll holder Li2617.000 polished stainless steel roll holder with black plastic clamp for mounting onto LinidoSolutions hinged arm support (LI2603.3xx), fi xed arm support (LI2601.0xx) or Ergogrip grabrail (LI2611.xxx) 135 toilet roll holder for single-handed use Li2618.000 plastic toilet roll holder, which makes it possible to change, unroll and tear the toilet paper with one hand fi ts any Linido hinged arm support (LI2603.3xx), fi xed arm support (LI2601.0xx) or Ergogrip grabrail (LI2611.xxx) only in white 140 125 95-120 190-215 The Toilet roll holder for single-handed use won the Fireva Design Award 2002. This award is an accolade to innovative design in assistance for disabled and mobility impaired people. In addition the Toilet roll holder for single use has been nominated for the VSK award 2004 in the sanitary category. options for hinged arm support attachment for alarm and holes for cable (excluding alarm and cable) toilet roll holder, welded into hinged arm support this picture only depicts an example of the possible options options are available separately or in any desired combination. (see price list for conditions) options for hinged arm support attachment for pneumatic operation of cistern (excluding pneumatic operation) toilet roll holder, welded into hinged arm support this picture only depicts an example of the possible options options are available separately or in any desired combination. (see price list for conditions)
17 Shower curtain rail page 19 Vertical combination grabrail page 11 Shower holder page 17 Angled grabrail for two walls page 11 Toothbrush holder page 17 Click-on frame for shower seat page 7 Washbasin rail page 29 Shower seat with backrest page 6 Floorsupport set for nylon shower seats page 6
18 bathroom accessories Showerhead holder Li2630.200 total plastic construction suitable for every Ergogrip grabrail; converts an Ergogrip into a safe shower rail can also be fi tted after installation of the Ergogrip grabrail light and easily adjustable over the full length of Ergogrip grabrail ergonomical grip for conical shaped collar of shower tube 100 120 50 toilet brush and holder Li2631.000 total plastic construction including stainless steel fi xings 73 390 150 145 tooth brush holder Li2632.000 total plastic construction including transparent tumbler including stainless steel fi xings 100 73 120 120 Soap dish Li2633.000 total plastic construction including stainless steel fi xings 40 73 140 160
bathroom accessories 19 Shelf Li2634.000 plastic shelf including stainless steel fi xings 685 145 toilet roll holder Li2635.000 total plastic construction can also be used as spare roll holder including stainless steel fi xings 100 73 125 robe hook Li2636.000 (single robe hook) Li2636.001 (double robe hook) total plastic construction including stainless steel fi xings 73 30 70 75 95 73 75 towel rail Li2637.001 (300 mm) Li2637.002 (600 mm) combination of towel rail and grabrail top tube can be used as grabrail Ergogrip 145 700 510 600 92 400 92 145 210 300
210 20 bathroom accessories Shower curtain rail Li2641.000 for corner shower without curtain and rings 92 ceiling mounting kit for shower curtain rail Li2641.100 recommended when shower curtain rail LI2641.000 is longer than standard can be shortened to the desired height 73 95 1000 23 900 900 Hardware for tilting mirror Li2642.001 can also be used as a grabrail (400 mm) fi xings for putting in a mirror of your own choice will be delivered without mirror 505 400 92 Handle for moving tilting mirror Li2642.002 handle for moving tilting mirror
miscellaneous products 21 ceiling support Li2612.000 ceiling mounting ceiling mounting plate with a length adjustable nylon strap and moulded grip Ø8,5 240 52 80 225 120-1500 280 Swinging support Li2613.000 wall mounting can be operated by the user, from a lying position length of strap 1500 mm can be locked at 0, 45, 90, 135 and 180 degrees length adjustable nylon strap and moulded grip 300 915 240 225 120-1500 300 256 80 100 Ø10 280 backrest Li2701.200 Li2703.200 for wall fi xing behind a toilet with a high level cistern the user can lean backwards in safety and comfort fl exible and depth adjustable available as backrest for installation adjacent to cistern (LI2705.200), specifi cations on request 265 A LI2701.200 195-260 LI2703.200 275-420 400 A Ø80 52
22 Washbasin products Washbasin rail 810 Li2606.000 offers support around the washbasin special sizes available upon request 700 80 52 325 300 530 505 Washbasin unit Li3012.000 for smooth height and depth adjustment of washbasin by means of a gas spring adjustment range: 250 mm in height and 86 mm in depth easy mounting at any desired height suitable for all standard washbasins with a fl at back and a weight of 15-18 kg easy operation by means of a handle supplied without washbasin, tap and fl exible hoses only in white 405 395 235 72 52 500 320 280 240 35 flexible supply and drain set Li3013.000 fl exible supply and drain set Ø 40 mm, includes the washbasin plug, for standard washbasin and washbasin unit LI3012.000 fl exible hose 150 cm two 50 cm long fl exible hoses clad with stainless steel are supplied for attaching to hot and cold water supply and have 3/8 and 10 mm connectors drain can be mounted horizontally or vertically only in white
Shower stretchers & shower trolleys 23 Shower stretcher Li2403.150, Li2403.170 en Li2403.190 HT-cover material hinges to the wall (folds up or folds down) hinged leg supports including wall clamp to secure stretcher when folded up against the wall available with adjustable backrest by means of a gas spring (LI2404.150, LI2404.170 and LI2404.190) available with pvc water receiver and fl exible drain hose (LI2407.150, LI2407.170 and LI2407.190) available with adjustable backrest by means of a gas spring and with pvc water receiver and fl exible drain hose (LI2408.150, LI2408.170 and LI2408.190) different dimensions are available on request A B LI2403.150 1490 185 LI2403.170 1690 285 LI2403.190 1890 385 120 120 900 2xØ8.5 A B C LI2407.150 1490 465 185 LI2407.170 1690 615 285 LI2407.190 1890 615 385 5-80 B A 2xØ8.5 685 180 2xØ8.5 670 1065 B 755 A 120 Li2403.xxx 785 180 2xØ8.5 670 560 80 52 52 Li2404.xxx 52 52 measurement drawings Li2407 and Li2408 available upon request or see www.handicare.com 900 2xØ8.5 2xØ8.5 1065 C 110 790 815 Height adjustable shower trolley Li2514.150, Li2514.170 en Li2514.190 HT-cover material four stainless steel double braked castors Ø 125 mm adjustable backrest by means of a gas spring pvc water receiver with fl exible hose of 1000 mm height adjustable via hydraulic pump two hinged side fences only available in the mentioned dimensions available without backrest (LI2513.150, LI2513.170 and LI2513.190) 550-900 375 5-80 130 A B LI2514.150 LI2514.170 1505 1705 465 615 LI2514.190 1905 615 B A 1380 740 670 560 200 610 removable & hinged side fence a: removable side fence Li2490.125 suitable for all LinidoSolutions shower stretchers and shower trolleys including plastic mounting clamps 1250 170 305 170 305 b: Hinged side fence Li2590.125 suitable for all LinidoSolutions shower trolleys including plastic mounting clamps 180 180 1250 1250 1250 235 235
24 Hardware for tilting mirror page 20 Toothbrush holder page 18 Shelf page 18 Washbasin unit page 22 Showerhead holder page 18 Grabrail Ergogrip page 10 Angled grabrail 90º page 11 Towel rail page 19 Flexible supply and drain set - page 22 Shower/toilet chair Trento page 25 Handle for moving tilting mirror page 20
Shower and toilet chairs 25 Shower/toilet chair trento Li2175.021 seat height (incl. seat) 550 mm Li2175.121 seat height (incl. seat) 500 mm detachable and reversible toilet seat: hygiene opening at front or back at choice, polyurethane foam seat depth mm, seat width 470 mm ergonomically shaped backrest with lumbar support, polyurethane foam independent swivel armrests, ergonomic shape detachable rails for bedpan or bucket Ø 300-315 mm 490 B A B LI2175.021 550 475 LI2175.121 500 425 415 A 240 625 460 555 660 mobile shower/toilet chair trento Li2177.021 seat height (incl. seat) 550 mm Li2177.121 seat height (incl. seat) 500 mm detachable and reversible toilet seat: hygiene opening at front or back at choice, polyurethane foam seat depth mm, seat width 470 mm ergonomically shaped backrest with lumbar support, polyurethane foam integrated push bar independent swivel armrests, ergonomic shape detachable rails for bedpan or bucket Ø 300-315 mm four stainless steel double braked castors Ø 125 mm adjustable swing-up footrests 490 B 415 A B C LI2177.021 550 475 275-375 LI2177.121 500 425 275-325 555 900 C 240 A 625 460 accessories shower/toilet chair trento Li09506.636 Insert Only available for shower/toilet chair Trento Polyurethane foam (graphite) Li0121.917 replacement set toilet seat for Trento, excluding bedpan rails, polyurethane foam (graphite) Li0121.918 replacement set backrest for Trento, polyurethane foam (graphite) Li0121.919 replacement set bedpan rails for Trento, coated stainless steel 485 490 30 476 379 280 458 160 470 210 95 55 bedpan & bucket bedpan Li02979.411 stainless steel, Ø 300 mm with lid and handle bucket Li02979.430 stainless steel, Ø 300 mm with lid and handle
26 Shower and toilet chairs tilting shower and toilet chair Li2150.021 independent swivel armrests, ergonomic shape four stainless steel double braked castors Ø 125 mm backrest HT-cover material adjustable and removable swing away foot rests hinged soft toilet seat with open front removable rails for bedpan Ø 300-315 mm 30 tilting operation by gas spring height and depth adjustable headrest calf strap and lumbar support can be placed over toilet (max. height mm) 1140 410 685 1090 250 385-485 575 270 625 604 Height adjustable/tilting shower chair Li2161.321 independent swivel armrests, ergonomic shape four stainless steel double braked castors Ø 125 mm backrest HT-cover material adjustable and removable swing-away stainless steel foot rests detachable and reversible soft toilet seat: hygiene opening at front or back at choice removable rails for bucket Ø 300-315 mm electrical control for adjustment of seat height from 580 to 1040 mm electrical control for smooth tilt, max. 35 safety belt, lumbar support and calf strap included height and depth adjustable headrest can be placed over toilet Li2161.121 as LI2161.321, but with height adjustment by means of a hydraulic pump and tilting operation by gas spring 1195-1655 840-1400 410 775 1065 250 375-455 580-1040 270 625 650 mobile shower and toilet chair heavy duty Li2137.521 seat height (incl. seat) 610 mm frame: width 600 mm, depth 500 mm reinforced frame maximum user weight: 300 kg fl ip-down locking armrests backrest HT-cover material hinged soft toilet seat with open front rails for bedpan and bucket Ø 300-315 mm four stainless steel double braked castors Ø 125 mm adjustable swing-up footrest 490 550 490 525 940 380-435 570 290 680 600
Shower and toilet chairs 27 Shower and toilet chair Li2135.011 seat height (incl. seat) 610 mm Li2135.111 seat height (incl. seat) 530 mm independent swivel armrests, ergonomic shape backrest HT-cover material hinged soft toilet seat with closed front rails for bedpan and bucket Ø 300-315 mm also available with seat with open front (LI2135.021 and LI2135.121) also available with castors (LI2136.011, LI2136.111, LI2136.021 and LI2136.121) 490 C B A B C LI2135.011 570 495 550 LI2135.111 490 415 470 415 A 250 625 555 635 mobile shower and toilet chair Li2137.021 seat height (incl. seat) 610 mm Li2137.121 seat height (incl. seat) 530 mm independent swivel armrests, ergonomic shape backrest HT-cover material hinged soft toilet seat with open front rails for bedpan and bucket Ø 300-315 mm four stainless steel double braked castors Ø 125 mm adjustable swing-up footrests also available with seat with closed front (LI2137.011 and LI2137.111) C 490 B A B C D LI2137.021 570 495 550 320-480 LI2137.121 490 415 470 320-400 415 D A 250 625 900 Shower and toilet chair (self propelling) Li2138.021 seat height (incl. seat) 610 mm Li2138.121 seat height (incl. seat) 530 mm independent swivel armrests, ergonomic shape backrest HT-cover material hinged soft toilet seat with open front distance from wall centre toilet opening: 545 mm rails for bedpan and bucket Ø 300-315 mm stainless steel double braked castors Ø 125 mm and moulded 24 wheels with brake and rim adjustable swing-up footrests also available with seat with closed front (LI2138.011 and LI2138.111) 490 C B A B C D LI2138.021 570 495 550 320-480 LI2138.121 490 415 470 320-400 415 1080 D 250 A 650 Soft toilet seats Li0121.904 soft toilet seat with open front Li0121.905 soft toilet seat with closed front only for LinidoSolutions shower and toilet chairs, but not for Trento polyurethane foam (graphite) 250 200 40 200 Li09506.306 insert for soft toilet seat only for the above-mentioned soft toilet seats polyurethane foam (graphite) 90
265 95 28 Shower chairs Shower stool with armrests Li2002.000 soft, removable seat with water permeable slots continuous, fi xed armrests height adjustable in 8 steps, no tools needed seat height 415-585 mm 310 590 485 410 555-725 415-585 325 back support for shower stool Li2002.001 separate back support for shower stool LI2002.000, can be fi xed without tools soft back support with integrated handle 120 30 392 370 325 390 Shower chair Li2139.000 seat height 540 mm Li2139.100 seat height 490 mm seat and backrest HT-cover material independent swivel armrests, ergonomic shape also available with castors (LI2140.000 and LI2140.100) B 490 A B LI2139.000 540 520 LI2139.100 490 470 415 A 250 625 555 635 mobile shower chair Li2141.000 seat height 540 mm Li2141.100 seat height 490 mm seat and backrest HT-cover material independent swivel armrests, ergonomic shape four stainless steel double braked castors Ø 125 mm adjustable swing-up footrests B 490 A B C LI2141.000 540 520 280-410 LI2141.100 490 470 280-360 415 C A 250 625 900
Shower chairs 29 Shower chair (self propelling) Li2142.000 seat height 540 mm Li2142.100 seat height 490 mm seat and backrest HT-cover material independent swivel armrests, ergonomic shape stainless steel double braked castors Ø 125 mm and moulded 24 wheels with brake and rim adjustable swing-up footrests B 490 A B C LI2142.000 540 520 280-410 LI2142.100 490 470 280-360 415 C A 250 650 1080 options for chairs these options are not available for the range of shower/toilet chairs trento central brake operation on both rear castors left- and right handed operation not for self propelling chairs, LI2150.021, LI2161.021 and LI2161.221 Swivel armrests with front support independent swivel armrests can not be attached afterwards and need therefore to be ordered with the chair adjustable, removable swing-away footrests can be put on all types LinidoSolutions shower chairs and shower and toilet chairs, except on LI2161.121 and LI2161.321
30 Swimming pool products Swimming pool hoist chair Li2141.108 seat height 490 mm seat and backrest HT-cover material hoist openings on backrest and forelegs independent swivel armrests, ergonomic shape armrests in aluminium with white coating four stainless steel double braked castors Ø125 mm adjustable swing-up footrest only available in seat height 490 mm only available in polished stainless steel 316 960 415 900 280-360 490 250 625 Swimming pool shower trolley Li2514.198 HT-cover material four stainless steel double braked castors Ø125 mm adjustable backrest by means of a gas spring height adjustable by means of hydraulic pump with right- and left handed operation two hinged side fences upper frame can be detached from 1900lower frame and has an inlay 615 frame with hoist openings only available in the mentioned dimensions and length 1900 mm only available in polished stainless steel 316 550-900 375 5-80 550-900 5-80 375 230 130 615 1900 1380 740 670 560 230 7 6 5 6 130 1380 610
toilet seat 31 comfort-seat Li09506.316 soft toilet seat for people who need to sit on the toilet for a longer time and/ or have a sensitive skin two kinds of foam under a waterproof coating including stainless steel fi xing material only available in graphite 405 155 190 95 280 460 45
technical information 33 Maintenance For all products: clean with mild, non abrasive cleaners only. Rinse with clean water after use. Guarantee Two years warranty on all products, excluding the cushioned cover for shower seat (LI09506.400) and Neoprene parts, which is one year. This guarantee is only valid for normal use of the products and use of the products without modifi cation, in their original state. All LinidoSolutions bath & safety products have the CE-mark medical equipment (class1). Material specifications steel ST37.2, DIN 17100, Ø 28,6 x 1,5 mm steel ST37.2, DIN 17100, Ø 25,4 x 1,5 mm stainless steel AISI 304, Ø 28,0 x 1,5 mm stainless steel AISI 304, Ø 25,4 x 1,5 mm stainless steel AISI 316, Ø 25,0 x 1,5 mm plastic shower seats: glassfi bre reinforced nylon wall fl anges Ergogrip and wall plate hinged arm support: glassfi bre reinforced nylon plastic bathroom accessories: PMMA wall plates of shower seats: stainless steel AISI 304 Moving and/or hinged parts are always made of stainless steel and/or plastic. Preparation for coating Before coating, steel is alkaline de-greased, phosphated and passifi ed. Coating Epoxypolyester, 80-100 µm thick. Weatherresistant and hardened (International Buchholz hardness test to DIN 53153: > 80). Meets salt spray test to DIN 50021/ASTM B117 (1000 hours, < 1mm). HT-cover material White woven nylon cloth with plastic coating fully glued around the tube. Does not wear out and is easy to clean. Isolation sets Because of the necessary electrical isolation, products for wall mounting or fl oor mounting, which are not designed with plastic fl anges or wall plates, will be delivered with an isolation set including heavy duty washers and caps. Fixing materials Linido products will be delivered without any fi xings, except for bathroom accessories. Determine the type of wall and use suitable fi xings. For a durable, reliable mounting, use only corrosion resistant fi xing materials. Weight limits for normal use Shower stool user weight: max. 150 kg. Shower chairs and shower and toilet chairs user weight: max. 200 kg. Constant push pressure per armrest: max. 75 kg. Mobile shower and toilet chair heavy duty user weight: 300 kg. Constant push pressure per armrest: max. 125 kg. Shower/toilet chairs Trento user weight: 200 kg. Constant push pressure per arm rest: max. 75 kg. Tilting shower chair and height adjustable-/tilting shower chairs user weight: max. 150 kg. Constant push pressure per armrest: max. 75 kg. Shower seats user weight: max. 150 kg. user weight for nylon shower seat and shower seat with HT-cover material in combination with a fl oorsupport set: max. 300 kg. Constant push pressure per armrest: max. 75 kg. Produced and tested according to NEN-EN 12182 Shower stretchers and shower trolleys user weight: max. 150 kg. Fixed and hinged arm supports user weight: max. 150 kg. Lateral pressure: max.100 kg. Hinged arm supports Produced and tested according to NEN-EN 12182 Grabrails Ergogrip user weight: max. 150 kg. Swinging support and ceiling support user weight: max. 150 kg. ProGrip user weight: max. 150 kg. Back-Up User weight: max. 150 kg All dimensions in this brochure are in mm. Tolerances for all indicated dimensions are ± 5 mm. Handicare reserves the right to modify designs as part of our ongoing product development.
34 mounting advice for fixed & hinged arm supports, shower seats, ProGrip, back-up, floor console, adjustment systems and swinging support. type of wall? then these plugs: and these screws: Solid concrete, natural stone, solid red brick, sand-lime brick Fischer Universalplug UX 10 art. 77869 Stainless steel hexagon head wood screws 8 mm Solid/massive aerated concrete (Ytong, Durox), plaster block, pumice solid brick IInjection mortar + threaded rod Possible mortars to use are: - FIS VS 150 C set art. 45302 or FIS VS 150 C art. 0509 - Fischer threaded rod M8 Stainless steel threaded rod M8 Perforated/hollow Hollow brick (Poriso), Hollow sand-lime brick Injection mortar + anchor sleeve + screw inserts Possible mortars to use are: - FIS VS 150 C set art. 45302 or FIS VS 150 C art. 0509 - Fischer anchor sleeve FIS HK 14x70K art.50436 - Fischer screw insert FIS E 8x85K art.58050 Stainless steel hexagon head wood screws 8 mm Plaster board, squeezed fi breboard, chipboard Reinforce the wall, e.g. with plywood Stainless steel hexagon head wood screws 8 mm Concealed tank and carrier system, like Geberit, Wisa Reinforce the wall, e.g. with solid water plywood, thickness 32 mm Stainless steel hexagon head wood screws 8 mm This statement of mounting methods is a recommendation only. The mounting methods and the length of the screws need to be determined at site according the type of wall. Handicare is not responsible for any inexpert mounting of products and the possible damage as a result of that.
mounting advice 35 for grabrails Ergogrip, shower stretchers, ceiling support, washbasin rail, grabrail for stair newel, grabrail for door frame and backrests for wall mounting. type of wall? then these plugs: and these screws: Solid concrete, natural stone, solid red brick, sand-lime brick Fischer Universal UX 8 art. 77869 Stainless steel hexagon head wood screws 6 mm Solid/massive aerated concrete (Ytong, Durox), plaster block, pumice solid brick Injection mortar + threaded rod Possible mortars to use are: - FIS VS 150 C set, art. 45302 or FIS VS 150 C art. 0509 - Fischer threaded rod M6 Stainless steel threaded rod M6 Perforated/hollow Hollow brick (Poriso), Hollow sand-lime brick Injection mortar + anchor sleeve + screw inserts Possible mortars to use are: - FIS VS 150 C set art. 45302 or FIS VS 150 C art. 0509 - Fischer anchor sleeve FIS HK 12x60K art.50432 - Fischer screw insert FIS E 6x75K art.58049 Stainless steel hexagon head wood screws 6 mm Plaster board, squeezed fi breboard, chipboard Reinforce the wall, e.g. with plywood Stainless steel hexagon head wood screws 6 mm Concealed tank and carrier system, like Geberit, Wisa Reinforce the wall, e.g. with solid water plywood, thickness 32 mm Stainless steel hexagon head wood screws 6 mm This statement of mounting methods is a recommendation only. The mounting methods and the length of the screws need to be determined at site according the type of wall. Handicare is not responsible for any inexpert mounting of products and the possible damage arising from incorrect installation.
Handicare bathroom safety Weteringweg 5-9, 2641 KM Pijnacker P.O. Box 70, 2640 AB Pijnacker The Netherlands T +31 (0)15 369 54 40 F +31 (0)15 369 71 64 linido.sales@handicare.com www.linido.com