Facts and figures ALLROUNDER 32 C GOLDEN EDITION Distance between tie bars: 12.6 x 12.6 (32 x 32 mm) Clamping force: 55 tons Injection unit: 2.3 oz, 3.7 oz www.arburg.com
32 C GOLDEN EDITION Machine dimensions 72.84 46.6 31.69 12.99 4.72 25.2 19.69 min. 21 max. 385 31.5 8.66 2.28 14.92 27.56 58.7 47.64 32.48 53.15 56.3 8.66 / 17.13 3) 78.35 15.16 25.2 max. 122.48 1) max. 134.25 2) Electrical connection Cooling water connection R15.35 125.2 1) 134.45 2) 1) Injection unit 2.3 oz 2) Injection unit 3.7 oz 3) Conveyor belt 2
Technical data 32 C GOLDEN EDITION Clamping unit with clamping force max. tons 32 C GOLDEN EDITION 55 Opening force stroke max. tons inch.. 14.3 13.78.. Mold height, fixed variable min. inch.. 7.87 ---.. Platen daylight fixed variable max. inch.. 21.65 ---.. Distance between tie bars (w x h) inch.. 12.6 x 12.6.. Mold mounting platens (w x h) max. inch.. 17.56 x 17.56.. Weight of movable mold half max. lbs 396 Ejector force stroke max. tons inch.. 3.3 4.92.. Dry cycle time EUROMAP ² min. s - inch.. 1.3-8.82.. Injection unit with screw diameter mm 2 2.3 oz 25 3 25 3.7 oz 3 35 Effective screw length L/D 25 2 16.7 24 2 17 Screw stroke max. inch. 3.94.. 4.72.... Calculated stroke volume max. cu. inch 1.9 3. 4.3 3.6 5.2 7.... Shot weight max. oz / PS 1. 1.6 2.3 1.9 2.7 3.7... Material throughput max. lbs/h PS 12.1 17.6 2.9 22. 29.7 35.2... max. lbs/h PA6.6 6.2 8.8 1.8 11. 15.4 17.6... Injection pressure max. psi 3625 29 2155 3625 29 21315 Holding pressure max. psi 3625 29 2155 3625 29 21315 Injection flow ² max. cu. inch/s 3.9 6.1 8.9 4. 5.9 8.1... Screw circumferential speed ² max. ft./min 92 115 138 115 138 161. Screw torque max. ft./lbs 89 111 133 155 185 214 Nozzle contact force retraction stroke max. tons inch 5.5 7.9 5.5 8.27.. Heating capacity zones kw 4.9 5 9.4 5. Feed hopper lbs 8 8 Drive and connection with injection unit 2.3 oz 2 pumps 3.7 oz Net weight of machine lbs 495 56 Sound press. level Ref. only ⁴ db(a) 68 3 Oil filling gal..... 43.59.... Drive power ² max. kw 11 11 Electrical connection ³ kw 19 22 Total A 6 --- 7 --- Machine A --- 25 --- 25 Heat A 15 --- 25 --- Cooling water connection max. F 86 min. Δp psi. 22 1". Machine type with EUROMAP size designation ¹ 32 C GOLDEN EDITION 55 tons 2.3 oz 3.7 oz All specifications relate to the basic machine version. Deviations are possible depending on variants, process settings and material type. Depending on the drive, certain combinations, e.g. max. injection pressure and max. injection flow may be mutually exclusive. 1) Clamping force (tons) - Large injection unit = max. stroke volume (cu. inch) x max. injection pressure (psi) 2) Specifications depend on drive version / drive design. 3) Specifications relate to 23V/6 cycles 46V/6 cycles. 4) Detailed info in the operating instr. [ ] Information applies to alternative equipment. 3
32 C GOLDEN EDITION Mold installation dimensions 8.27-.4 Stroke max. 4.92 C Ø1.969+.1 E X Y 9.17 D B A 2.76 max. 1.57 9.84 Stroke max. 13.78 min. 7.87 11.81 max. 21.65 36.81 Center ejector X 1.52 Bore in mold (if required) Y 3.94 Ø.95-.4 Ø.71 Ø.94 Ø3.54 Ø2.36.12 3.34-.4.67.79 C-D view Robotic system mounting E threads 5/16-18 UNC.63 deep 16.54 11.2.79 3.35 3.94 3.94.69 2.7 threads 1/2-13 UNC.95 deep 4
Mold installation dimensions 32 C GOLDEN EDITION Fixed mold mounting platen A Ø4+.2 3 17.91 7 2.17.59 Ø1.77 1.57 9.17 17.91 14.37 12.6 Ø.86 18.35 14 1 1.63 6 19.8 threads 5/8-11 UNC 1.22 deep 3 6 1 14 25.2 Moving mold mounting platen B threads 5/16-18 UNC.63 deep for robotic handling device 7 12.6 14.37 28.35 safety gate Useful clamping surface when pulling the tie rods 18.54 5
32 C GOLDEN EDITION Shot weights Theoretical shot weights for the most important materials Injection units Screw diameter inch mm Polystyrene max. oz PS Styrene heteropolymerizates max. oz SB max. oz SAN, ABS 1) Cellulose acetate max. oz CA 1) Celluloseacetobutyrate max. oz CAB 1) Polymethyl methacrylate max. oz PMMA Polyphenylene oxide, mod. max. oz PPO Polycarbonate max. oz PC Polysulphone max. oz PSU Polyamides max. oz PA 6.6 PA 6 1) max. oz PA 6.1 PA 11 1) Polyoximethylene (Polyacetal) max. oz POM Polyethylene terephthalate max. oz PET Polyethylene max. oz PE-LD max. oz PE-HD Polypropylene max. oz PP Fluorpolymerides max. oz FEP, PFA, PCTFE 1) max. oz ETFE Polyvinyl chloride max. oz PVC-U max. oz PVC-P 1) 2.3 oz.71.87.98 18 22 25.7 1.1 1.4.7 1.1 1.4.7 1.1 1.4.8 1.2 1.6.8 1.1 1.5.8 1.1 1.5.7 1. 1.3.8 1.2 1.5.8 1.2 1.6.7 1.1 1.4.7 1. 1.3.9 1.4 1.8.9 1.3 1.7.6.8 1.1.6.9 1.1.6.9 1.1 1.2 1.8 2.3 1. 1.5 2..9 1.3 1.7.8 1.2 1.6 3.7 oz.98 1.18 1.38 25 3 35 1.9 2.7 3.7 1.9 2.7 3.6 1.8 2.6 3.6 2.1 3.1 4.2 2. 2.9 3.9 2. 2.8 3.8 1.8 2.5 3.5 2. 2.9 3.9 2.1 3. 4. 1.9 2.7 3.7 1.7 2.5 3.4 2.3 3.4 4.6 2.3 3.3 4.4 1.4 2.1 2.8 1.5 2.1 2.9 1.5 2.2 3. 3. 4.4 6. 2.7 3.8 5.2 2.3 3.3 4.5 2.1 3.1 4.2 1) average value ARBURG GmbH + Co KG Arthur-Hehl-Strasse 7229 Lossburg Tel.: +49 7446 33- www.arburg.com E-Mail: contact@arburg.com With locations in Europe: Germany, Belgium, Denmark, France, United Kingdom, Italy, Netherlands, Austria, Poland, Switzerland, Slovakia, Spain, Czech Republic, Turkey, Hungary Asia: People s Republic of China, Indonesia, Malaysia, Singapore, Taiwan, Thailand, United Arab Emirates America: Brazil, Mexico, USA For more information, please go to www.arburg.com. 217 ARBURG GmbH + Co KG The brochure is protected by copyright. Any utilization, which is not expressly permitted under copyright legislation, requires the previous approval of ARBURG. All data and technical information have been compiled with great care. However we accept no responsibility for correctness. Individual illustrations and information may deviate from the actual delivery condition of the machine. The relevant valid operating instructions are applicable for the installation and operation of the machine. ARBURG GmbH + Co KG DIN EN ISO 91 + 141 + 51 certified 529441_EN_US_3217 Subject to alterations