Machinery Directive. Directives-Regulations. Directives and other safety related law Presented at the NSAI CE Marking Seminar

Similar documents
New Machinery Directive

Consumer, Environmental and Health Technologies Biotechnology and Food Supply Chain. GUIDANCE DOCUMENT No. 1

DIRECTIVE 2009/59/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 13 July 2009 on rear-view mirrors for wheeled agricultural or forestry tractors

L 24/30 Official Journal of the European Union

CETOP POSITION PAPER PP 07

Official Journal of the European Union. (Non-legislative acts) REGULATIONS

ECOMP.3.A EUROPEAN UNION. Brussels, 12 December 2018 (OR. en) 2018/0220 (COD) PE-CONS 67/18 ENT 229 MI 914 ENV 837 AGRI 596 PREP-BXT 58 CODEC 2164

LOAD SAFETY SERIES Information Sheet

LOAD SAFETY SERIES Information Sheet

SOUTH AFRICAN NATIONAL STANDARD

Swedish Code of Statutes

(Liability of producers and importer for spent batteries and accumulators etc.)

STATUTORY INSTRUMENTS. S.I. No. 160 of 2017

Guidelines on Maximum Weights and Dimensions of Mechanically Propelled Vehicles and Trailers, Including Manoeuvrability Criteria July 2017

Guidelines on Maximum Weights and Dimensions of Mechanically Propelled Vehicles and Trailers, Including Manoeuvrability Criteria January 2018

(Legislative acts) REGULATIONS

Vehicle Technical Inspections in the Slovak Republic

COMMISSION DELEGATED REGULATION (EU) /... of

(Acts whose publication is not obligatory) COUNCIL COUNCIL DIRECTIVE

COUNCIL OF THE EUROPEAN UNION. Brussels, 11 December /3/06 REV 3 ADD 1. Interinstitutional File: 2003/ 0153(COD) ENT 84 CODEC 561

EEA AGREEMENT - ANNEX XIII p. 99 APPENDIX 2 { 1 }

FOR INTERNAL WORKING PURPOSES ONLY Version 7.2 (04/06/2012)

The main Regulations they replaced or Amended are:-

OECD Standard Codes for the Official Testing of Agriculture and Forestry Tractors

Guidelines on Maximum Weights and Dimensions of Mechanically Propelled Vehicles and Trailers

STATUTORY INSTRUMENTS. S.I. No. 248 of 2014 ROAD TRAFFIC (CONSTRUCTION, EQUIPMENT AND USE OF VEHICLES) (AMENDMENT) REGULATIONS 2014

Official Journal L 076, 22/03/2003 P

COMMISSION DELEGATED REGULATION (EU) /... of

Guidelines on Maximum Weights and Dimensions of Mechanically Propelled Vehicles and Trailers, Including Manoeuvrability Criteria

ANNEX. to the DIRECTIVE OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL

Vehicle Technical Inspections in the Slovak Republic

WELLINGTON, NEW ZEALAND. PURSUANT to section 152 of the Land Transport Act 1998

... A CUT ABOVE THE REST

ISO Earth-moving machinery Wheeled or high-speed rubber-tracked machines Performance requirements and test procedures for brake systems

EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL

Information Sheet

Position Paper. Telehandler Use: Lifting Suspended Loads

Economic and Social Council

Official Journal of the European Union

FAQ. Frequently Asked Questions on exhaust emission requirements for tractors. European Agricultural Machinery Association.

Guidelines on Maximum Weights and Dimensions of Mechanically Propelled Vehicles and Trailers, Including Manoeuvrability Criteria

Australian Standard. Tractors Roll-over protective structures Criteria and tests. Part 1: Conventional tractors

This document is meant purely as a documentation tool and the institutions do not assume any liability for its contents

Legislative Alignment with the Old Approach Directives. Page 1 of 33

Internal Market Directives adopted as at sorted by transposition deadline

CONSULTATION DOCUMENT

12042/16 MGT/NC/ra DGE 2

COMMISSION REGULATION (EU)

ANNEXES. to the COMMISSION DELEGATED REGULATION

Connection technology for Linear Motion Systems 1.3

Low Sulphur Fuel Oils Preliminary Estimated Costs to Canadian Industry based on European Data

Economic and Social Council

(submitted by the Dutch delegation)

S T A N D A R D. ASAE S FEB04 Front and Rear Power Take-Off for Agricultural Tractors

This Regulation is established on the basis of subsections 26 (3) and (8) of the Waste Act.

CHAPTER 403. HAZARDOUS MATERIAL TRANSPORTATION

Official Journal of the European Union

Hydraulic fluid power Dimensions and requirements of quick-action couplings

TR 135 MACHINERY APPLICATIONS AGRICULTURE AGRICULTURE PLUS

ENGINEERING REPORT RE11049

Evaluation of type approval possibilities for AT Tyres

Small Wind Energy - International Standards. Small Wind Energy International Standards. Overview

INTERNATIONAL STANDARD

STATUTORY INSTRUMENTS. S.I. No. 449 of 2007 EUROPEAN COMMUNITIES (MOTOR VEHICLES UN ECE TYPE APPROVAL) (AMENDMENT) REGULATIONS 2007

ITEM 8 ATTACHMENT A ORDINANCE NO

ORDINANCE OF THE STATES OF DELIBERATION

Joint Research Centre

BULL 424 ESA BULL 624 ESA

Official Journal L 012, 18/01/2000 P

STATUTORY INSTRUMENTS. S.I. No. 155 of 2011

City of, Kansas Electric Department. Net Metering Policy & Procedures for Customer-Owned Renewable Energy Resources

This document is meant purely as a documentation tool and the institutions do not assume any liability for its contents

STATUTORY INSTRUMENTS. S.I. No. 127 of 2009 EUROPEAN COMMUNITIES (MOTOR VEHICLES TYPE APPROVAL) REGULATIONS 2009

Having regard to the Treaty establishing the European Economic Community, and in particular Article 75 thereof;

COMMISSION DELEGATED REGULATION (EU) /... of XXX

F5 565 Rear-view mirrors (ENTR/2004/1340)

Regulations relating to the Use of Vehicles, Chapter 5

4) Availability of resources (parts and materials for use and preservation) 1. VEHICLE REGISTRATION, TYPE APPROVAL, CUSTOMS AND TAXES

This document is a preview generated by EVS

Number 24 of 2008 MOTOR VEHICLE (DUTIES AND LICENCES) (NO. 2) ACT 2008 ARRANGEMENT OF SECTIONS. 3. Amendment of Part I of Schedule to Act of 1952.

Welcome to the MOL Blitz webinar Locking & Tagging in Mine Hoisting Plants

Sense7-series Non-contact coded safety switch

An overview of Directive (EU) 2015/2193 from the Power Generation business perspective

Decree on the Use of Vehicles on the Road (1257/1992, amendments up to 1227/2011 included)

BULL 5M - BULL 5M.S BULL 8M - BULL 8 M.S BULL 8 OM - BULL 8 OM.S

COMMISSION REGULATION (EU) / of XXX

A Practical Guide to Free Energy Devices

COMMISSION REGULATION (EU) No /.. of XXX

IMPORTANT INFORMATION ON CHANGES TO VEHICLE TESTING IN NORTHERN IRELAND

REGULATIONS Official Journal of the European Union L 200/1

HyLAW. HyDrail Rail Applications Assessment. Main Author(s): [Dainis Bošs, Latvian Hydrogen association] Contributor(s):

GRAND UNION CANAL UXBRIDGE WEST LONDON UB8 2GH. Accommodation schedule. Block B

Requirements of Load Platforms of Agricultural Tractors

Technical Summary. Contract for Procurement of Manual Valves, Relief Valves, Control Valves, and Valve Actuators (IO/15/CFT/11867/ACS CP/3)

FEM PG CLE EOT POSITION ON WEEE & RoHS (Recast)

Certificate of Appointment. Eurofins Product Service GmbH

International Crane Stakeholder Assembly. - Guidance - Lifting of Persons with Mobile Cranes

Requirements of Driver s Field of Vision for Agricultural Tractors

TRANSPORT FOR LONDON. GLA 2015 No. 11 THE GLA ROADS AND GLA SIDE ROADS (LONDON SAFER LORRY SCHEME) (RESTRICTION OF GOODS VEHICLES) TRAFFIC ORDER 2015

Gadget Fact ry HOLIDAY PROGRAMME 10 DECEMBER JANUARY 2019 DAILY PROGRAMME: DECEMBER 2018 SUNDAY 16 DECEMBER 10:00-11:00 VENUE

Transcription:

Machinery Directive 24 November 2011 Directives-Regulations 2006/42/EC SI 407 of 2008 29 December 2009 2009/127/EC [Pesticide Application Machinery] SI 310 of 2011 15 December 2011 Directives and other safety related law 2005 Safety, Health and Welfare at Work Act-S 16 2007 S f t H lth d W lf t 2007 Safety, Health and Welfare at Work [General Application] Regulations-Reg.28 on use of work equipment www.nsai.ie 1

Scope (a) machinery; (b) interchangeable equipment; (c) safety components; (d) lifting accessories; (e) chains, ropes and webbing; (f) removable mechanical transmission devices; (g) partly completed machinery. Exclusions (a) safety components intended to be used as spare parts to replace identical components and supplied by the manufacturer of the original machinery; (b) specific equipment for use in fairgrounds and/or amusement parks; (c) machinery specially designed or put into service for nuclear purposes which, in the event of failure, may result in an emission of radioactivity; Exclusions cont. (d) weapons, including firearms; (e) the following means of transport: agricultural and forestry tractors for the risks covered by Directive 2003/37/EC, motor vehicles and their trailers covered by Council Directive 70/156/EEC, vehicles covered by Directive 2002/24/EC of the European Parliament and of the Council of 18 March 2002 relating to the type-approval of two or three-wheel motor vehicles, motor vehicles exclusively intended for competition, www.nsai.ie 2

Exclusions cont. -means of transport by air, on water and on rail networks with the exclusion of machinery mounted on these means of transport; (f) seagoing vessels and mobile offshore units and machinery installed on board Exclusions cont. (g) machinery specially designed and constructed for military or police purposes; (h) machinery specially designed and constructed for research purposes for temporary use in laboratories; (i) mine winding gear; (j) machinery intended to move performers during artistic performances; Machinery definition first indent an assembly, fitted with or intended to be fitted with a drive system other than directly applied human or animal effort, consisting of linked parts or components, at least one of which moves, and which are joined together for a specific application, www.nsai.ie 3

Machinery definition second indent an assembly referred to in the first indent, missing only the components to connect it on site or to sources of energy and motion, Machinery definition third indent an assembly referred to in the first and second indents, ready to be installed and able to function as it stands only if mounted on a means of transport, or installed in a building or a structure, Machinery definition fourth indent assemblies of machinery referred to in the first, second and third indents or partly completed machinery referred to in point (g) which, in order to achieve the same end, are arranged and controlled so that they function as an integral whole, www.nsai.ie 4

Machinery definition fifth indent an assembly of linked parts or components, at least one of which moves and which are joined together,intended for lifting loads and whose only power source is directly applied human effort; Interchangeable Equipment interchangeable equipment means a device which, after the putting into service of machinery or of a tractor, is assembled with that machinery or tractor by the operator himself in order to change its function or attribute a new function, in so far as this equipment is not a tool; Safety Component safety component means a component: which serves to fulfil a safety function, which is independently placed on the market, the failure and/or malfunction of which h endangers the safety of persons, and which is not necessary in order for the machinery to function, or for which normal components may be substituted in order for the machinery to function. www.nsai.ie 5

Lifting Accessory lifting accessory means a component or equipment not attached to the lifting machinery, allowing the load to be held, which is placed between the machinery and the load or on the load itself, or which is intended to constitute an integral part of the load and which is independently placed on the market; slings and their components are also regarded as lifting accessories; Chains,Ropes,Webbing chains, ropes and webbing means chains, ropes and webbing designed and constructed for lifting purposes as part of lifting machinery or lifting accessories; Removable Mechanical Transmission Device removable mechanical transmission device means a removable component for transmitting power between self-propelled p machinery or a tractor and another machine by joining them at the first fixed bearing. When it is placed on the market with the guard it shall be regarded as one product; www.nsai.ie 6

Partly Completed Machinery partly completed machinery means an assembly which is almost machinery but which cannot in itself perform a specific application. A drive system is partly completed machinery. Partly completed machinery is only intended to be incorporated into or assembled with other machinery or other partly completed machinery or equipment, thereby forming machinery to which this Directive applies; placing on the market means making available for the first time in the Community machinery or partly completed machinery with a view to distribution or use, whether for reward or free of charge; Emergency Stops Unsuitable as emergency stop as E-Stop not available at all times www.nsai.ie 7

Matters for concern Brush cutter Thank you www.hsa.ie www.nsai.ie 8