Aragon Weather-proof surface-mounted luminaires with polycarbonate diffuser, for T5 fluorescent lamps T with transparent body 654do$a IP66 6 Joule 8 C Aragon 1 T Aragon 2 T Recommended areas Ceiling- and wall-mounted luminaires for damp or corrosive environments and covered exterior areas. Recommended for increased mechanical stability requirements. T The transparent luminaire body provides an indirect light component with an interesting design. Colour effects can be achieved with the transparent version of Aragon luminaires when combined with coloured lamps. Production sites subject to fire hazards Due to low surface temperatures and high IP rating suitable for production sites subject to fire hazards. Control gear option Versions 14/24, 28/54 and 35/49 in Multi-Lamp technology allow operation of T5 lamps with different wattages. E With electronic control gear. Aragon 149 T E UTE: 0.64 H + 0.19 T DIN : B20 CIBSE: BZ 7/1.5/BZ 6 BZ 7/4/BZ 6 Optical system Diffuser made of clear impact-resistant and UV-stabilised polycarbonate with fine-grained etched diffuser ends. Smooth exterior finish, with internal linear prisms. Diffuser made in one piece, mechanically stable. Safe retention of the diffuser by means of interlocking tabs moulded into the body and diffuser, closed without tools. S With highly-specular reflection-intensifying reflector, for symmetrical light distribution. Other control gear versions available on request. Aragon 149 S E UTE: 0.85 E + 0.05 T DIN : A BZ 5 Luminaire body Polycarbonate, recyclable, very low inflammability, light-grey. T Transparent, for additional indirect light component. With top and end cut outs for mains supply and further wiring as well as for through-wiring by means of heat-resistant internal wiring. Grommets are enclosed loose, Internal wiring to be ordered separately. Mounting by means of enclosed stainless steel fixing clamps. With stainless steel wire bracket for steel strip suspension or for chain suspension to be provided by the contractor. Aragon 149 E UTE: 0.79 H + 0.17 T DIN : B20 CIBSE: BZ 6 BZ 7/2/BZ 6
Lamp characteristics 525 Aragon 1 Aragon 2 Aragon 1 S Reference TOC Control gear options Lamps D D1 D2 kg EWmm Aragon 114/24 T 42 9 04 1 x 14/24 390 1.6 Aragon 128/54 T 42 951 04 1 x 28/54 800 235 475 2.4 Aragon 135/49/80 T 42 952 04 1 x 35/49/80 0 235 475 2.7 Aragon 214/24 T 51 517 04 2 x 14/24 390 2.5 Aragon 228 T 38 748 04 2 x 28 800 235 475 3.4 Aragon 235 T 38 749 04 2 x 35 0 235 475 3.8 Aragon 249 T 38 7 04 2 x 49 0 235 475 3.8 Aragon 254 T 38 751 04 2 x 54 800 235 475 3,4 Aragon 114/24 15 7 04 1 x 14 390 1.7 Aragon 128/54 15 512 04 1 x 28/54 800 235 475 2.6 Aragon 135/49/80 15 516 04 1 x 35/49/80 0 235 475 2.9 Aragon 214/24 51 515 04 2 x 14/24 390 2.3 Aragon 228 15 529 04 2 x 28 800 235 475 3.6 Aragon 235 15 530 04 2 x 35 0 235 475 4.0 Aragon 249 16 493 04 2 x 49 0 235 475 4.0 Aragon 254 15 533 04 2 x 54 800 235 475 3.6 Aragon 128/54 S 15 513 04 1 x 28/54 800 235 475 3.2 Aragon 135/49/80 S 15 517 04 1 x 35/49/80 0 235 475 3.5 Accessories TOC Description Aragon LV 5x1200 38 716 00 Internal wiring, 5 x 1.5 mm² for luminaires 28 W, 54 W Aragon LV 5x10 16 495 00 Internal wiring, 5 x 1.5 mm² for luminaires 35 W, 49 W, 80 W Aragon SB 15 537 00 Steel strip suspension, 1 pair, 1 m long, made of stainless steel. Aragon 1 Aragon 1 S, Aragon 2
Aragon Weather-proof surface-mounted luminaires with polycarbonate diffuser, for T8 fluorescent lamps 654do$a IP66 6 Joule 8 C Aragon 1 Aragon 2 Application Ceiling- and wall-mounted luminaires for damp or corrosive environments and covered exterior areas. Recommended for areas where increased mechanical strength is required. Optical system Diffuser made of clear impact-resistant and UV-stabilised polycarbonate with fine-grained etched diffuser ends. Smooth exterior finish, with internal linear prisms. Diffuser made in one piece, mechanically stable. Safe retention of the diffuser by means of interlocking tabs moulded into the body-diffuser, closed without tools. S With highly-specular reflection-intensifying reflector. SA With highly-specular reflection-intensifying reflector, for asymmetrical light distribution. Production sites subject to fire hazards Due to low surface temperatures and high IP rating suitable for production sites subject to fire hazards. Control gear option E With electronic control gear. Other control gear versions available on request. Aragon 158 UTE: 0.60 H + 0.16 T DIN : B20 CIBSE: BZ 6 BZ 7/2.5/BZ 6 Aragon 158 S UTE: 0.68 E + 0.04 T DIN : A BZ 5 Luminaire body Polycarbonate, recyclable, very low flammability, light-grey. With top and end cut outs for mains supply and further wiring as well as for through-wiring by means of heat-resistant internal wiring. Grommets are enclosed loose. Internal wiring to be ordered separately. Mounting by means of enclosed stainless steel fixing clamps. With stainless steel wire bracket for steel strip suspension or for chain suspension (provided by the installer). Aragon 158 SA UTE: 0.66 G + 0.04 T DIN : A30 BZ 5
Lamp characteristics 525 Aragon 1 S Aragon 2 S Aragon 1 SA Reference TOC Control gear options Lamps D D1 D2 kg E Wmm Aragon 118 15 8 04 1 x 18 390 2.2 Aragon 136 15 518 04 1 x 36 800 235 475 3.2 Aragon 158 15 523 04 1 x 58 0 235 475 3.5 Aragon 218 15 527 04 2 x 18 390 2.9 Aragon 236 15 531 04 2 x 36 800 235 475 4.8 Aragon 258 15 534 04 2 x 58 0 235 475 5.2 Aragon 136 S 15 519 04 1 x 36 800 235 475 4.3 Aragon 158 S 15 524 04 1 x 58 0 235 475 4.6 Aragon 236 S 15 532 04 2 x 36 800 235 475 5.0 Aragon 258 S 15 535 04 2 x 58 0 235 475 5.4 Aragon 136 SA 15 520 04 1 x 36 800 235 475 4.3 Aragon 158 SA 15 525 04 1 x 58 0 235 475 4.6 Accessories TOC Description Aragon LV 5x1200 38 716 00 Internal wiring, 5 x 1.5 mm² for luminaires 36 W Aragon LV 5x10 16 495 00 Internal wiring, 5 x 1.5 mm² for luminaires 58 W Aragon SB 15 537 00 Steel strip suspension, 1 pair, 1 m long, made of stainless steel. Aragon 1 Aragon 1 S, Aragon 2
TRILUX säljs i Sverige genom: PROLJUS AB Kyrkogatan 18 570 03 VRIGSTAD www.proljus.se info@proljus.se Björn Celén bjorn.celen@proljus.se 070-601 05 63 Johan Celén johan.celen@proljus.se 070-382 29 63