HOT GAS GENERATOR COMBUSTION CHAMBERS System Dr. Schoppe for PULVERIZED LIGNITE fuel oil and gas from 100 kw up to 300 MW CARBOTECHNIK Hot gas generator 40 MW for pulverized lignite, fuel oil and sewer gas during erection in a sugar factory. On the left side standing the hot gas generator and on the right hand side the rotary dryer. Complete firing plants with silo, dosing machine, assembly and the commissioning Reliable customer service. Service and assembly from one hand CARBOTECHNIK ENERGIESYSTEME GMBH Lauterbachstr. 12, 82538 Geretsried-Gelting Telefon 08171/92 82-0 Telefax 08171/92 82-79
The industrial firing with the lowest operating costs Hot gas generator 8,5 MW pulverized lignite on a rotary sand dryer. We build gas generators and industrial combustion chambers on the basis of 30 years research and development. The oldest burners are since 1984, in operation, at the customers satisfaction, without repair. The basis is the dicovery of a flow effect, who allows to build even the biggest hot gas generator whitout refractory lining. They are long-lived and complete insensitive against fast temperature changes. From the cold state to full load they require 1 2 minutes. No starting shuttor or chimney. The hole plant is very simple. On this base we are building hot gas generators in 2 standard series as well as combustion chambers in special design for pulverized lignite, fuel oil and gas. 1. hot gas generator open series up to 15 MW, 850 C, whitout flue gas recirculation, whithout refractory 2. hot gas generator with mixing chamber up to 45 MW, 850 C, with flue gas recirculation, whitout refractory 3. combustion chambers in special design up to 300 MW, 1400 C, back pressure up to 6 bar Please ask for our list of references Hot gas generators.
1. Hot gas generator Open Series Hot gas generator 14 MW pulverized lignite in an asphalt plant Functioning The main part is a conical combustion chamber of chromium steel. The flame is separated from the chamber wall by a very stable cold air layer. The flame length depends on the fuelair-ratio:
Hot gas generator Open Series capacity, dimensions B A Max. capacity (at p = 500 mm WG) Typ HO 5 HO 7 HO 8,5 HO 12 HO 16 HO 22 hot gas flow 8.256 12.336 16.464 21.128 30.270 43.240 m³ n /h air flow 8.035 11.962 15.956 20.541 29.350 41.930 m³ n /h fuel flow 2,88 4,28 5,72 7,36 10,51 15,02 MW at 850 C Dimensions (for all fuels) lenght L 2300 2760 2890 3530 4080 4840 mm diameter D 950 1100 1250 1400 1600 1800 mm air inlet A x B 450 x 355 560 x 450 630 x 560 710 x 560 900 x 710 1000 x 800 mm² DIN 24154 Modifications reserved.
Hot gas generator Open Series Model selection type required air-pressure hot gas flow m³ n/h Reading example for 15000 m³ n /h can be used: a) Type HO 16 at 120 mm WG b) or Typ HO 12 at 230 mm WG c) or Typ HO 8,5 at 410 mm WG Selection depending on the repuired turn-down of the hot gas flow. Fuels Hot gas temperature - pulverized coal, lignite or biomass - light fuel oil - gas (natural, propane) At every hot gas flow a temperature between 300 C and 850 C can be obtained by controlling the fuel flow. Higher temperatures on request. The hot gas generator has no upper capacity limit, but the repuired air pressure increases with the square of the air flow at a given generator size. So the generator size has to be selected according to the available air pressure. Usually we recommend air pressure not exneeding 500 mm WG.
2. Hot gas generator with mixing chamber - operation with flue gas recirculation. - stoichiometric firing, thus saving up to 10 % of the fuel costs. No refractory. About 2 minutes from start to full capacity. Hot gas generator 21 MW pulverized lignite for the raw material drying in a cement plant. Center: Hot gas generator Down right: pulverized lignite silo Hot gas 200 800 C Capacity 5 43 MW Hot gas flow 48000 168000 m³ n /h Fuels (alternative) - pulverized lignite, coal, wood - light fuel oil, gas.
Hot gas generator with mixing chamber Flow rates, dimensions The burner is firing a flame jet of 60 100 m/s downwards into the mixing chamber. Thereby the flame gas become intensely admixed with the recycled gas. The burner works without excess air. Accordingly the flue gas amount is small. You saves thereby: - almost the half of the filter costs, - as far as 10 % of the fuel costs. It is worth while to calculate this hot gas generator very carefully. - burner type L 7 L 8,5 L 12 L 16 L 22 ---- - firing rate (max.) 12,5 16,6 21,4 30,6 43,7 MW - air flow 11962 15956 20541 29350 41930 m³ n /h - hot gas flow at 700 C 48.210 64.340 82.780 118.300 168.000 m³ n /h - burner diameter d 1200 1300 1500 1700 1900 mm high h 1800 2080 2350 2820 3360 mm - mixing chamber diameter D 2800 3100 3400 3900 4400 mm high H 8,44 9,34 10,24 11,75 13,26 m - hot gas - exit D A 1500 1700 2000 2300 2800 mm Modifications reserved.
Hot gas generator with a mixing chamber This is our proven high velocity burner without refractory. Fuels - pulverized lignite - light fuel oil - gas (natural, propane) The capacity rates as shown below are based on soichiometric combustion (air-fuel-ratio = 1,0). For more details ask for our brochure Impulse Burner. Hot gas generator 15 MW pulverized lignite for heating a cement mill, under construction.
3. Combustion chamber of special design Two lines are well proven: - Combustion chamber with counter chamber - Special designs 3.1 Combustion chamber with counter chamber - hot gas up to 1400 C, with refractory - operation with flue gas recirculation or excess air - very uniform temperature distribution - back pressure up to 6 bar - all liquid and gaseous fuels, including blast furnace gas Functioning An impulse burner and a mixing chamber are arranged in counter flow. The burner blows his flame jet with 60 80 m/s into the central back flow of the mixing chamber: Hot gas generator 250 kw (light fuel oil) for the stand still inertisation of a coal milling plant.
zu 3.1 Combustion chamber with counter chamber Combustion chamber 12 MW (heavy fuel oil, gas) for the heating of a calcining plant, 1400 C, back pressure 1 bar Hot gas generator 5,8 MW blast-furnace gas at a coal mill in a steel plant. In the front right side is the vertical coal mill.
Hot gas generator System Dr. Schoppe Special Design CARBOTECHNIK Some basic research and over 30 years experience allows us to supply custom made combustion chambers. So far we have build the world wide biggest as well as the smallest hot gas generator. Examples: 1. Three-step hot gas generator as a environment-friendly ground flare in a german chemical plant. - capacity 290 MW - hight: 30 m - fuel: gaseous production wastes
2. Hot gas generator for the cracking of hydrocarbons. Dimensions: - 20 mm - lenght 40 mm - 2,4 x speed of sound - stat. pressure 6 bar (Ü) - residence time circa 0,4 x 10-5 sec. CARBOTECHNIK Energiesysteme GmbH Lauterbachstr. 12 82538 Geretsried-Gelting Telefon +49 / 8171 / 92 82-0 Telefax +49 / 8171 / 92 82-79 Homepage: E-mail: www.carbotechnik.de info@carbotechnik.de