STANDARD EQUIPMENT Alternator, 0 Ampere, 4V Anti-slip plates Auto-decel Automatic engine warm-up system atteries, 1 Ah/ x 1V oom holding valve ROPS cab (ISO 1117-) Corrosion resistor Counterweight Dry type air cleaner, double element Electric horn Engine, Komatsu SAAD114E-3 Engine overheat prevention system OPTIONAL EQUIPMENT Fan guard structure Hydraulic track adjusters (each side) Multi-function color monitor Power maximizing system PPC hydraulic control system Radiator & oil cooler dust proof net Rear reflector Rear view mirror, RH, LH, rear, sidewise Seat belt, retractable Starting motor, 7. kw/4 v x 1 Suction fan Track guiding guard, center section Track roller, 7 each side PC300LC-8, 8 each side Track shoe, 00 mm 4" triple grouser PC300LC-8, 700 mm 8" triple grouser Travel alarm Two-mode settings for boom Working light, (boom and RH) Working mode selection system PC300LC-8 FLYWHEEL HORSEPOWER Gross: 194 kw 0 HP @ 190 rpm Net: 184 kw 4 HP @ 190 rpm OPERATING WEIGHT : 31100 3010 kg 8,0 70,70 lb PC300LC-8: 3100 380 kg 9,70 71,830 lb PC 300 Additional filter system for poor-quality fuel Air conditioner with defroster Arms 0 mm 7'3" arm assembly 0 mm 8'4" arm assembly 318 mm 10'" arm assembly 400 mm 13'" arm assembly atteries, 140 Ah/ x 1 V olt-on top guard, (Operator Protective Guards level (OPG)) SPECIAL PURPOSE UCKET Ripper bucket for hard and rock ground Capacity SAE heaped 0.9 m 3 1.18 yd 3 CECE heaped 0.8 m 3 1.0 yd 3 Width 100 mm 47." www.komatsu.com oom, 470 mm 1'3" Cab accessories Rain visor Sun visor Cab front guard Full height guard Half height guard Heater with defroster Long lubricating intervals for implement bushing Rear view monitoring system Seat, suspension with heater Seat, suspension Service valve Shoes, triple grouser shoes 700 mm 8", 800 mm 31." PC300LC-8 00 mm 4", 800 mm 31." Track roller guards (full length) Track frame undercover Working lights ( on cab) Printed in Japan 01301 IP.As Photo may include optional equipment. CEN0019-08 Materials and specifications are subject to change without notice. is a trademark of Komatsu Ltd. Japan.
Productivity Features High Production and Low Fuel Consumption High power, working performance and fuel efficiency improve production and fuel costs. WALK-AROUND Ecology and Economy Features Low emission engine A powerful turbocharged and air to air aftercooled Komatsu SAAD114E-3 engine provides 184 kw 4 HP. This engine is EPA Tier 3 and EU Stage 3A emissions certified, without sacrificing power or machine productivity. Economy mode saves fuel consumption. Low operation noise See pages 4 and. HORSEPOWER Gross: 194 kw 0 HP @ 190 rpm Net: 184 kw 4 HP @ 190 rpm OPERATING WEIGHT : 31100 3010 kg 8,0 70,70 lb PC300LC-8: 3100 380 kg 9,70 71,830 lb UCKET CAPACITY 0. 1.80 m 3 0.8.3 yd 3 Large Drawbar Pull provides superb steering and slope climbing performance. Large Digging Force Pressing the Power Max function button temporarily increases the digging force 7%. Two-mode Setting for oom Switch selection allows either powerful digging or smooth boom operation. See page. Large TFT LCD Monitor Easy-to-see and use 7" large multi-function color monitor Can be displayed in 1 languages for global support. TFT : Thin Film Transistor LCD : Liquid Crystal Display See page 8. Easy Maintenance Long replacement interval of engine oil, engine oil filter, hydraulic oil and hydraulic filter. Equipped with fuel pre-filter as standard (with water separator) Side-by-side radiator and oil cooler configuration enables independent removal and installation of those two components. Equipped with the EMMS monitoring system. Easy access to engine oil filter and fuel drain valve Large fuel tank capacity See page 9. Large Comfortable Cab Low-noise cab Low vibration with cab damper mounting Highly pressurized cab with optional air conditioner Operator seat and console with armrest that enables operations in the appropriate operational posture. See page. Safety Design ROPS cab (ISO 1117-) Anti-slip plates for safe work on machine Safety enhancement with large side-view, sidewise, and rear mirrors added. Rear view monitoring system for easy checking behind the machine (optional) See page 7. Photo may include optional equipment. 3
PRODUCTIVITY & ECOLOGY FEATURES Komatsu Technology Seven-inch TFT liquid crystal display Working Modes Selectable Two established work modes are further improved. Larger Maximum Drawbar Pull Komatsu develops and produces all major components, such as engines, electronics and hydraulic components, in house. With this Komatsu Technology, and adding customer feedback, Komatsu is achieving great advancements in technology. To achieve both high levels of productivity and economical performance, Komatsu has developed the main components with a total control system. The result is a new generation of high performance and environment friendly excavators. Environment-friendly Clean Engine The gets its exceptional power and work capacity from a Komatsu SAAD114E-3 engine. Output is 184 kw 4 HP, providing increased hydraulic power and improved fuel efficiency. Komatsu SAAD114E-3 engine is EPA Tier 3 and EU Stage 3A emissions certified and reduced NOx emission by 40%. The SAAD114E-3 engine adopts the electronically controlled Heavy Duty HPCR* fuel injection system. *HPCR : High Pressure Common Rail Hydraulics Hydraulic control valve Hydraulic system controller Main pump Electronic control unit for engine Engine Heavy duty HPCR (High Pressure Common Rail) system P mode Power or work priority mode has low fuel consumption, but fast equipment speed and maximum production and power are maintained. E mode Economy or Fuel priority E fuel priority mode E mode further reduces fuel Work priority P P mode consumption, but maintains the P-mode-like working equipment speed for light duty work. You can select Power or Economy modes using a one-touch operation on the monitor panel depending on workloads. Eco-gauge that Assists Energy-saving Operations Equipped with the Eco-gauge that can be recognized at a glance on the right of the multi-function color monitor for environment-friendly energy-saving operations. Allows focus on operation in the green range with reduced CO emissions and efficient fuel consumption. Idling Caution To prevent unnecessary fuel consumption, an idling caution is displayed on the monitor, if the engine idles for minutes or more. Eco-gauge Larger maximum drawbar pull provides superb steering and slope climbing performance. Maximum drawbar pull: 4 kn 900 kgf 9,300 lb Large Digging Force With the one-touch Power Max. function digging force has been further increased. (8. seconds of operation) Maximum arm crowd force (ISO): 10 kn (1.3t) 171 kn (17.4t) (with Power Max.) Maximum bucket digging force (ISO): 1 kn (1.t) 7 kn (3.1t) (with Power Max.) *Measured with Power Max function, 318 mm 10'" arm and ISO rating Smooth Loading Operation Two return hoses improve hydraulic performance. In the arm out function, a portion of the oil is returned directly to the tank providing smooth operation. Two-mode Setting for oom Smooth mode provides easy operation for gathering blasted rock or scraping down operation. When maximum digging force is needed, switch to Power mode for more effective excavating. Smooth mode Power mode 7% UP 7% UP Return hoses Unique two-pump system ensures smooth compound movement of the work equipment. HydrauMind controls both pumps for efficient engine power use. This system also reduces hydraulic loss during operation. oom floats upward, reducing lifting of machine front. This facilitates gathering blasted rock and scraping down operations. oom pushing force is increased, ditch digging and box digging operation on hard ground are improved. Low Operation Noise Enables a low noise operation using the low-noise engine and methods to cut noise at source. Ambient noise meets the EU Stage noise regulation. 4
WORKING ENVIRONMENT Safety Features ROPS Cab Lock Lever The machine is equipped with a ROPS cab that conforms to ISO 1117- for excavators as standard equipment. The ROPS cab has high shock-absorption performance, featuring excellent durability and impact strength. It also satisfies the requirements of ISO OPG top guard level 1 for falling objects. Combined with the retractable seat belt, The ROPS cab protects the operator in case of tipping over and against falling objects. Locks the hydraulic pressure to prevent unintentional movement. Neutral start function allows machine to be started only in lock position. Large Side-view, Rear, and Sidewise Mirrors Enlarged left-side mirror and addition of rear and side mirror allow the to meet the new ISO visibility requirements. Low Cab Noise The newly-designed cab is highly rigid and has excellent sound absorption ability. Thorough improvement of noise source reduction and use of low noise engine, hydraulic equipment, and air conditioner allows this machine to generate a low level of noise. Low Vibration with Cab Damper Mounting uses viscous damper mounting for cab that incorporates longer stroke and the addition of a spring. The new cab damper mounting combined with high rigidity deck aids vibration reduction at operator seat. Rubber Silicon Oil Spring Wide Newly-designed Cab Newly-designed wide spacious cab includes seat with reclining backrest. The seat height and longitudinal inclination are easily adjusted using a pullup lever. You can set the appropriate operational posture of armrest together with the console. Reclining the seat further enables you to place it into the fully flat state with the headrest attached. Pressurized Cab Optional air conditioner, air filter and a higher internal air pressure (+.0 mm Aq +0."Aq) prevent external dust from entering the cab. Automatic Air Conditioner (optional) Enables you to easily and precisely set cab atmosphere with the instruments on the large LCD. The bi-level control function keeps the operator's head and feet cool and warm respectively. This improved air flow function keeps the inside of the cab comfortable throughout the year. Defroster function keeps front glass clear. Anti-slip Plates Highly durable antislip plates maintain superior traction performance for the long term. Pump/engine Room Partition Pump/engine room partition prevents oil from spraying onto the engine if a hydraulic hose should burst. Thermal and Fan Guards Thermal and fan guards are placed around high-temperature parts of the engine and fan drive. 7
MAINTENANCE FEATURES Large LCD Color Monitor Easy Maintenance Large Multi-lingual LCD Monitor A large user-friendly color monitor enables safe, accurate and smooth work. Improved screen visibility is achieved by the use of TFT liquid crystal display that can easily be read at various angles and lighting conditions. Simple and easy to operate switches. Function keys facilitate multi-function operations. Displays data in 1 languages to globally support operators around the world. Indicators 1 3 Travel speed 7 4 Engine water 8 temperature gauge 1 3 Auto-decelerator Working mode asic operation switches Mode Selection Auto-decelerator Working mode selector Traveling selector Hydraulic oil temperature gauge Fuel gauge Eco-gauge Function switches menu 4 uzzer cancel Wiper Windshield washer asic operation switches The multi-function color monitor has Power mode, Economy mode, Lifting mode, reaker mode and Attachment mode. 4 1 3 4 1 3 Function switches Air conditioner operation switches EMMS (Equipment Management Monitoring System) Monitor Function 7 8 Easy Radiator Cleaning Since radiator and oil cooler are arranged side-by-side, it is easy to clean, remove and install them. Equipped with the Eco-drain Valve as Standard Prevents clothes and the ground from becoming contaminated due to oil leakage when replacing the engine oil. High-capacity Air Cleaner High capacity air cleaner is comparable to that of larger machines. The larger air cleaner can extend air cleaner life during long-term operation and prevents early clogging and resulting power decrease. Reliability is improved by a new seal design. Easy Access to Engine Oil Filter and Fuel Drain Valve Engine oil level gauge, and fuel filter are one side mounted to improve accessibility. Engine oil filter and fuel drain valve are remotely mounted to improve accessibility. Engine Oil Filter Fuel Drain Valve Long Work Equipment Greasing Interval (optional) High quality MRC bushings and resin shims are optionally available for work equipment pins excluding bucket, extending greasing interval to 00 hours. Equipped with the Fuel Pre-filter (with Water Separator) Removes water and contaminants in the fuel to prevent fuel problems. Long-life Oil, Filter Uses high-performance filtering materials and long-life oil. Extends the oil and filter replacement interval. Engine oil & Engine oil filter Hydraulic oil Hydraulic oil filter Hydraulic oil filter (Eco-white element) every 00 hours every 000 hours every 1000 hours Working Mode Application Advantage P Power mode Maximum production/power Fast cycle time E Economy mode Excellent fuel economy L ATT Lifting Mode Lifting mode reaker operation Attachment mode Hydraulic pressure is increased by 7% Optimum engine rpm, hydraulic flow Optimum engine rpm, hydraulic flow, way When the Lifting mode is selected, lifting capacity is increased 7% by raising hydraulic pressure. Controller monitors engine oil level, coolant temperature, battery charge and air clogging, etc. If controller finds any abnormality, it is displayed on the LCD. Maintenance Function Monitor informs replacement time of oil and filters on LCD when the replacement interval is reached. Trouble Data Memory Function Large Fuel Tank Capacity Large fuel tank capacity extends operating hours before refueling. Fuel tank is treated for rust prevention and improved corrosion resistance. 8 Monitor stores abnormalities for effective troubleshooting. Photo may include optional equipment. 9
SPECIFICATIONS DIMENSIONS ENGINE Model............................. Komatsu SAAD114E-3 Type.................... Water-cooled, 4-cycle, direct injection Aspiration......................... Turbocharged, aftercooled Number of cylinders.................................... ore...................................... 114 mm 4.49" Stroke..................................... 13 mm.31" Piston displacement.......................... 8.7 ltr 0 in 3 Horsepower: SAE J199........................ Gross 194 kw 0 HP ISO 949 / SAE J1349................. Net 184 kw 4 HP Rated rpm................................... 190 rpm Fan drive type................................. Mechanical Governor........................ All-speed control, electronic EPA Tier 3 and EU Stage 3A emissions certified. HYDRAULICS Type.. HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves Number of selectable working modes....................... 4 Main pump: Type................. Two-variable displacement piston type Pumps for........ oom, arm, bucket, swing, and travel circuits Maximum flow................. 3 ltr/min 141 U.S. gal/min Supply for control circuit................. Self-reducing valve Hydraulic motors: Travel.............. x axial piston motors with parking brake Swing.......... 1 x axial piston motor with swing holding brake Relief valve setting: Implement circuits............ 37.3 MPa 380 kgf/cm,400 psi Travel circuit................ 37.3 MPa 380 kgf/cm,400 psi Swing circuit................ 7.9 MPa 8 kgf/cm 4,00 psi Pilot circuit..................... 3. MPa 33 kgf/cm 470 psi Hydraulic cylinders: (Number of cylinders bore x stroke x rod diameter) oom..... 140 mm x 1480 mm x 100 mm." x 8.3" x 3.9" Arm...... 1 10 mm x 18 mm x 110 mm.3" x 71.9" x 4.3" ucket:............... for 3.19 m 10'" and 4.0 m 13'" Arm 1 140 mm x 18 mm x 100 mm." x 0." x 3.9"................. for. m 7'3" and. m 8'4" Arm 1 10 mm x 18 mm x 110 mm.9" x 0." x 4.3" DRIVES AND RAKES Steering control....................... Two levers with pedals Drive method.................................. Hydrostatic Maximum drawbar pull.............. 4 kn 900 kgf 9,300 lb Gradeability.................................... 70%, 3 Maximum travel speed: High.................. km/h 3.4 mph (Auto-Shift) Mid.................. 4. km/h.8 mph Low................. 3. km/h.0 mph Service brake............................... Hydraulic lock Parking brake......................... Mechanical disc brake SWING SYSTEM Drive method.................................. Hydrostatic Swing reduction............................. Planetary gear Swing circle lubrication....................... Grease-bathed Service brake............................... Hydraulic lock Holding brake/swing lock................ Mechanical disc brake Swing speed..................................... 9. rpm UNDERCARRIAGE Center frame.................................... X-frame Track frame.................................. ox-section Seal of track................................. Sealed track Track adjuster.................................. Hydraulic Number of shoes (each side):.......................................... 4 PC300LC-8........................................ 48 Number of carrier rollers......................... each side Number of track rollers (each side):........................................... 7 PC300LC-8......................................... 8 COOLANT AND LURICANT CAPACITY (REFILLING) Fuel tank.............................. 0 ltr 10 U.S. gal Coolant............................... 3.0 ltr 8. U.S. gal Engine................................ 3.0 ltr 9. U.S. gal Final drive, each side...................... 9.0 ltr.4 U.S. gal Swing drive............................ 1. ltr 4.4 U.S. gal Hydraulic tank.......................... 188 ltr 49.7 U.S. gal OPERATING WEIGHT (APPROXIMATE) Operating weight including 470 mm 1'3" one-piece boom, 318 mm 10'" arm, SAE heaped 1.4 m 3 1.83 yd 3 bucket, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment. PC300LC-8 Operating Ground Operating Ground Shoes Weight Pressure Weight Pressure 00 mm 31100 kg 4" 8,0 lb 700 mm 3140 kg 8" 9,30 lb 800 mm 3010 kg 31." 70,70 lb.9 kpa 3100 kg 9.0 kpa 0.4 kgf/cm 0.0 kgf/cm 9.1 psi 9,70 lb 8. psi 4.8 kpa 300 kg 1. kpa 0. kgf/cm 0.3 kgf/cm 7.9 psi 70,990 lb 7.48 psi 48. kpa 380 kg 4.7 kpa 0.49 kgf/cm 0.47 kgf/cm 7.03 psi 7,000 lb.3 psi A C E D Arm Length 0 mm 7'3" 0 mm 8'4" 318 mm 10'" 400 mm 13'" A Overall length 11300 mm 37'1" 11180 mm 3'8" 11140 mm 3'7" 11170 mm 3'8" Length on ground (transport): 730 mm 4'0" 8 mm 1'11" 7 mm 18'11" 300 mm 17'" PC300LC-8 749 mm 4'7" 80 mm '" 930 mm 19'" 47 mm 18'0" C Overall height (to top of boom)* 3480 mm 11'" 340 mm 11'4" 38 mm 10'9" 370 mm 1'4" (m) 11 10 9 8 7 4 3 1 0-1 - -3-4 - - -7-8 1 (m) WORKING RANGE 11 10 9 8 7 4 440 8 G F 3 H 1 0 G.L. ucket Capacity (heaped) Width Weight Number Arm Length of Teeth SAE, PCSA CECE Without Side Cutters With Side Cutters With Side Cutters. m 7'3". m 8'4" 3.19 m 10'" 4.0 m 13'" 0. m 3 0.8 yd 3 0.48 m 3 0.3 yd 3 10 mm 4.0" 740 mm 9.1" 4 kg 1,40 lb 3 1.14 m 3 1.49 yd 3 1.00 m 3 1.31 yd 3 114 mm 4.1" 17 mm 0." 900 kg 1,980 lb 4 1.40 m 3 1.83 yd 3 1.0 m 3 1.7 yd 3 1340 mm.8" 144 mm.9" 101 kg,40 lb 1.0 m 3.09 yd 3 1.40 m 3 1.83 yd 3 11 mm 9." 14 mm 4.8" 110 kg,430 lb X 1.80 m 3.3 yd 3 1.0 m 3.09 yd 3 1700 mm.9" *111 kg,40 lb X **1.40 m 3 1.83 yd 3 1.0 m 3 1.7 yd 3 148 mm 7.4" 108 kg 3,30 lb X G P** K D,L E* C* M Arm 0 mm 7'3" 0 mm 8'4" 318 mm 10'" 400 mm 13'" A Max. digging height 940 mm 31'0" 99 mm 3'8" 10100 mm 33'" 100 mm 34'7" Max. dumping height 0 mm 1'" 89 mm '7" 700 mm 3'" 7490 mm 4'7" C Max. digging depth 400 mm 1'0" 70 mm '" 7380 mm 4'3" 800 mm '11" D Max. vertical wall digging depth 4890 mm 1'1" 880 mm 19'4" 400 mm 1'0" 780 mm 3'11" E Max. digging depth of cut for 8' level 130 mm 0'1" 0 mm 1'" 7180 mm 3'7" 804 mm '" F Max. digging reach 1010 mm 33'" 100 mm 34'7" 11100 mm 3'" 11900 mm 39'1" G Max. digging reach 9910 mm 3'" 103 mm 34'0" 1090 mm 3'10" 11730 mm 38'" at ground level H Min. swing radius 4470 mm 14'8" 440 mm 14'7" 4310 mm 14'" 4370 mm 14'4" ucket digging force 8 kn 8 kn 00 kn 00 kn at power max. 3300 kgf/1,370 lb 3300 kgf/1,370 lb 0400 kgf/44,970 lb 0400 kgf/44,970 lb Arm crowd force kn 193 kn 1 kn 139 kn at power max. 900 kgf/0,490 lb 19700 kgf/43,430 lb 1800 kgf/37,040 lb 1400 kgf/31,310 lb ucket digging force 9 kn 9 kn 7 kn 7 kn at power max. 400 kgf/8,00 lb 400 kgf/8,00 lb 3100 kgf/0,930 lb 3100 kgf/0,930 lb Arm crowd force 3 kn 01 kn 171 kn 144 kn at power max. 4000 kgf/,910 lb 000 kgf/4,190 lb 17400 kgf/38,30 lb 14700 kgf/3,410 lb ISO rating SAE rating PC300LC-8 D Overall width 3190 mm 10'" 390 mm 10'10" E Overall height (to top of cab)* 314 mm 10'4" 314 mm 10'4" F Ground clearance, counterweight 118 mm 3'11" 118 mm 3'11" G Ground clearance (minimum) 00 mm 1'8" 00 mm 1'8" H Tail swing radius 340 mm 11'4" 340 mm 11'4" I Track length on ground 3700 mm 1'" 4030 mm 13'3" J Track length 4 mm 1'" 49 mm 1'3" K Track gauge 90 mm 8'" 90 mm 8'" L Width of crawler 3190 mm 10'" 390 mm 10'10" M Shoe width 00 mm 4" 700 mm 8" N Grouser height 3 mm 1.4" 3 mm 1.4" O Machine cab height 8 mm 8'" 8 mm 8'" P Machine cab width** 3090 mm 10'" 3090 mm 10'" Q Distance, swing center to rear end 340 mm 11'" 340 mm 11'" * : Including grouser height **: Including handrail ACKHOE UCKET, ARM, AND OOM COMINATION : General purpose use, density up to 1.8 ton/m 3 1. U.S. ton/yd 3 X: Not usable : General purpose use, density up to 1. ton/m 3 1. U.S. ton/yd 3 *: Without side cutters : Light duty work, density up to 1. ton/m 3 1.01 U.S. ton/yd 3 **: Rock bucket (with side shroud) A I J H,Q F O N 10 11
LIFTING CAPACITY WITH LIFTING MODE C A A: Reach from swing center : ucket hook height C: Lifting capacity Cf: Rating over front Cs: Rating over side : Rating at maximum reach Arm: 00 mm 7'3" ucket: 1.40 m 3 1.83 yd 3 SAE heaped Shoe: 00 mm 4 triple grouser 7. m *80 kg 70 kg 4' *19,100 lb 14,900 lb.0m 730 kg 000 kg 740 kg 100 kg *9100 kg 7700 kg 19' 1,00 lb 11,100 lb 1,400 lb 11,00 lb *0,100 lb 17,000 lb 4. m 00 kg 410 kg 70 kg 4900 kg *100 kg 700 kg *13800 kg 1100 kg 14' 13,700 lb 9,00 lb 1,000 lb 10,800 lb *,00 lb 1,900 lb *30,400 lb,00 lb 3.0 m 0 kg 370 kg 90 kg 40 kg 1000 kg 700 kg 9' 1,400 lb 8,00 lb 1,300 lb 10,00 lb,00 lb 14,800 lb 1. m 40 kg 30 kg 700 kg 4400 kg 900 kg 0 kg 4' 1,000 lb 7,800 lb 14,800 lb 9,700 lb 1,100 lb 13,800 lb 0 m 00 kg 30 kg 0 kg 40 kg 9300 kg 000 kg 0' 1,300 lb 8,000 lb 14,00 lb 9,400 lb 0,00 lb 13,300 lb 1. m 10 kg 4000 kg 00 kg 40 kg 90 kg 90 kg 110 kg 90 kg 4' 13,00 lb 8,800 lb 14,400 lb 9,300 lb 0,400 lb 13,100 lb 33,400 lb 1,100 lb 3.0 m 70 kg 4900 kg 9400 kg 100 kg *13400 kg 970 kg *1480 kg *1480 kg 9' 1,00 lb 10,800 lb 0,700 lb 13,400 lb *9,00 lb 1,00 lb *3,700 lb *3,700 lb 4. m *770 kg 730 kg *0 kg 40 kg *980 kg *980 kg 14' *17,100 lb 1,300 lb *14,400 lb 14,00 lb *1,800 lb *1,800 lb Arm: 0 mm 8'4" ucket: 1.40 m 3 1.83 yd 3 SAE heaped Shoe: 00 mm 4 triple grouser 7. m *700 kg 70 kg 4' *1,700 lb 1,00 lb.0m 00 kg 440 kg 70 kg 00 kg 19' 14,300 lb 9,800 lb 1,700 lb 11,00 lb 4. m 00 kg 370 kg 730 kg 000 kg *9900 kg 730 kg *13000 kg 11900 kg 14' 1,400 lb 8,300 lb 1,00 lb 11,000 lb *1,900 lb 1,00 lb *8,00 lb,00 lb 3.0 m 10 kg 3400 kg 10 kg 3400 kg 700 kg 4700 kg 1000 kg 80 kg *100 kg 100 kg 9' 11,400 lb 7,00 lb 11,400 lb 7,00 lb 1,00 lb 10,400 lb,00 lb 1,100 lb *34,100 lb 3,00 lb 1. m 000 kg 30 kg 000 kg 30 kg 70 kg 440 kg 9700 kg 30 kg 4' 11,000 lb 7,00 lb 11,100 lb 7,00 lb 14,900 lb 9,900 lb 1,400 lb 14,100 lb 0 m 100 kg 3300 kg 490 kg 300 kg 00 kg 4300 kg 9400 kg 100 kg *140 kg 900 kg 0' 11,300 lb 7,300 lb 10900 lb 7,000 lb 14,00 lb 9,00 lb 0,700 lb 13,400 lb *3,300 lb 0,900 lb 1. m 0 kg 300 kg 00 kg 40 kg 90 kg 000 kg *100 kg 90 kg 4' 1,300 lb 8,000 lb 14,400 lb 9,300 lb 0,400 lb 13,00 lb *33,00 lb 1,100 lb 3.0 m 00 kg 4300 kg 00 kg 4300 kg 930 kg 00 kg *140 kg 970 kg *1710 kg *1710 kg 9' 14,00 lb 9,00 lb 14,00 lb 9,00 lb 0,00 lb 13,400 lb *31,00 lb 1,00 lb *37,800 lb *37,800 lb 4. m *7400 kg 000 kg *8300 kg 30 kg *1100 kg 990 kg *13100 kg *13100 kg 14' *1,400 lb 13,00 lb *18,300 lb 14,000 lb *4,300 lb,000 lb *8,900 lb *8,900 lb Arm: 318 mm 10'" ucket: 1.40 m 3 1.83 yd 3 SAE heaped Shoe: 00 mm 4 triple grouser 7. m *300 kg 490 kg *80 kg 400 kg 4' *11,700 lb 10,900 lb *1,00 lb 11,900 lb.0 m *0 kg 390 kg *70 kg 30 kg 19' *11,00 lb 8,700 lb *1,000 lb 11,800 lb 4. m 00 kg 330 kg 30 kg 300 kg 700 kg 10 kg *900 kg 700 kg 14' 11,00 lb 7,400 lb 11,800 lb 7,900 lb 1,00 lb 11,300 lb *0,300 lb 1,700 lb 3.0 m 4700 kg 300 kg 0 kg 340 kg 710 kg 480 kg 1040 kg 700 kg *1000 kg 1100 kg 9' 10,300 lb,800 lb 11,00 lb 7,00 lb 1,800 lb 10,700 lb 3,000 lb 1,00 lb *33,100 lb 4,700 lb 1. m 40 kg 90 kg 00 kg 3300 kg 900 kg 40 kg 9900 kg 0 kg 1000 kg 1000 kg 4' 10,000 lb,00 lb 11,00 lb 7,300 lb 1,00 lb 10,100 lb 1,800 lb 14,00 lb 3,300 lb,00 lb O m 400 kg 3000 kg 490 kg 300 kg 0 kg 430 kg 900 kg 00 kg 1400 kg 9700 kg 0' 10,00 lb,00 lb 10,900 lb 7,100 lb 14,700 lb 9,00 lb 1,000 lb 13,700 lb 34,000 lb 1,400 lb 1. m 490 kg 300 kg 4900 kg 310 kg 0 kg 40 kg 930 kg 00 kg 10 kg 90 kg *900 kg *900 kg 4' 11,000 lb 7,100 lb 10,800 lb 7,000 lb 14,400 lb 9,400 lb 0,00 lb 13,300 lb 33,700 lb 1,100 lb *1,100 lb *1,100 lb 3.0 m 70 kg 370 kg 0 kg 40 kg 930 kg 00 kg 1300 kg 9700 kg *1800 kg *1800 kg 9' 1,700 lb 8,00 lb 14,400 lb 9,400 lb 0,00 lb 13,300 lb 33,800 lb 1,400 lb *39,700 lb *39,700 lb 4. m 740 kg 4900 kg 940 kg 00 kg *180 kg 990 kg *100 kg *100 kg 14' 1,400 lb 10,800 lb 0,900 lb 13,700 lb *8,400 lb,000 lb *3,00 lb *3,00 lb.0 m *300 kg *300 kg *810 kg *810 kg 19 *13,900 lb *13,900 lb *18,000 lb *18,000 lb Arm: 400 mm 13'" ucket: 1.14 m 3 1.49 yd 3 SAE heaped Shoe: 00 mm 4 triple grouser 1. m 4.' 7. m *410 kg 400 kg 4' *9,00 lb 8,900 lb.0 m *400 kg 3300 kg 700 kg 3900 kg 19' *9,000 lb 7,300 lb 1,00 lb 8,00 lb 4. m *410 kg 900 kg 0 kg 370 kg *7100 kg 30 kg 14' *9,100 lb,400 lb 1,300 lb 8,300 lb *1,700 lb 11,800 lb 3.0 m 4100 kg 0 kg 30 kg 300 kg 730 kg 000 kg *90 kg 7300 kg *190 kg 11800 kg 9' 9,000 lb,800 lb 11,800 lb 7,900 lb 1,300 lb 11,100 lb *1,300 lb 1,00 lb *8,00 lb,000 lb 1. m 390 kg 0 kg 10 kg 3400 kg 7000 kg 40 kg 10100 kg 70 kg *190 kg 100 kg 4' 8,700 lb,00 lb 11,400 lb 7,00 lb 1,400 lb 10,300 lb,300 lb 14,800 lb *3,00 lb 3,300 lb O m 4000 kg 0 kg 000 kg 30 kg 700 kg 4400 kg 900 kg 0 kg 140 kg 9700 kg 0' 8,800 lb,00 lb 11,000 lb 7,100 lb 14,800 lb 9,700 lb 1,100 lb 13,800 lb 34,100 lb 1,400 lb 1. m 40 kg 700 kg 480 kg 3100 kg 00 kg 400 kg 90 kg 90 kg 1,00 kg 930 kg *970 kg *970 kg *900 kg *900 kg 4' 9,400 lb,900 lb 10,700 lb,900 lb 14,300 lb 9,300 lb 0,400 lb 13,00 lb 33,100 lb 0,00 lb *1,00 lb *1,00 lb 1,00 lb 1,00 lb 3.0 m 470 kg 300 kg 480 kg 3100 kg 40 kg 410 kg 910 kg 900 kg 1000 kg 930 kg *140 kg *140 kg *9900 kg *9900 kg 9' 10,00 lb,700 lb 10,700 lb,900 lb 14,00 lb 9,100 lb 0,00 lb 13,000 lb 33,100 lb 0,00 lb *34,100 lb *34,100 lb 1,800 lb 1,800 lb 4. m 800 kg 370 kg 00 kg 400 kg 90 kg 000 kg *1400 kg 90 kg *0000 kg 19800 kg *1480 kg *1480 kg 14' 1,800 lb 8,300 lb 14,400 lb 9,300 lb 0,400 lb 13,00 lb *31,900 lb 1,100 lb *44,100 lb *43,00 lb 3,800 lb 3,800 lb.0 m *0 kg 400 kg *810 kg 0 kg *1100 kg 980 kg *1400 kg *1400 kg 19 *14,400 lb 11,900 lb *18,000 lb 13,800 lb *4,400 lb 1,700 lb *3,00 lb *3,00 lb *Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE standard No. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 7% of tipping load. 1
LIFTING CAPACITY WITH LIFTING MODE C A A: Reach from swing center : ucket hook height C: Lifting capacity Cf: Rating over front Cs: Rating over side : Rating at maximum reach PC300LC-8 Arm: 00 mm 7'3" ucket: 1.40 m 3 1.83 yd 3 SAE heaped Shoe: 700 mm 8 triple grouser 7. m *80 kg 700 kg 4' *19,100 lb 1,00 lb.0m *8300 kg 300 kg *800 kg 30 kg *9100 kg 800 kg 19' *18,300 lb 11,00 lb *18,100 lb 11,800 lb *0,100 lb 17,700 lb 4. m 730 kg 4400 kg 80 kg 10 kg *100 kg 70 kg *13800 kg 1100 kg 14' 1,00 lb 9,700 lb 18,900 lb 11,400 lb *,00 lb 1,700 lb *30,400 lb,700 lb 3.0 m 700 kg 390 kg 80 kg 4900 kg *110 kg 700 kg 9' 14,800 lb 8,700 lb 18,00 lb 10,800 lb *,00 lb 1,00 lb 1. m 00 kg 3800 kg 8000 kg 4700 kg 1140 kg 00 kg 4' 14,300 lb 8,300 lb 17,00 lb 10,300 lb,00 lb 14,00 lb 0 m 700 kg 380 kg 780 kg 400 kg 1110 kg 30 kg 0' 14,700 lb 8,00 lb 17,300 lb 10,000 lb 4,00 lb 14,000 lb 1. m 730 kg 40 kg 7800 kg 400 kg 11100 kg 300 kg *100 kg 10100 kg 4' 1,00 lb 9,400 lb 17,00 lb 9,900 lb 4,400 lb 13,900 lb *34,00 lb,00 lb 3.0 m *800 kg 00 kg *100 kg 40 kg *13400 kg 10300 kg *1480 kg *1480 kg 9' *19,000 lb 11,00 lb *3,300 lb 14,00 lb *9,00 lb,700 lb *3,700 lb *3,700 lb 4. m *770 kg *770 kg *0 kg *0 kg *980 kg *980 kg 14' *17,100 lb *17,100 lb *14,400 lb *14,400 lb *1,800 lb *1,800 lb PC300LC-8 Arm: 0 mm 8'4" ucket: 1.40 m 3 1.83 yd 3 SAE heaped Shoe: 700 mm 8 triple grouser 7. m *700 kg 000 kg 4' *1,700 lb 13,00 lb.0m *740 kg 40 kg *780 kg 40 kg 19' *1,400 lb 10,300 lb *17,400 lb 1,000 lb 4. m 0 kg 390 kg *8300 kg 0 kg *9900 kg 7700 kg *13000 kg 1400 kg 14' 14,00 lb 8,700 lb *18,400 lb 11,00 lb *1,900 lb 1,900 lb *8,00 lb 7,400 lb 3.0 m 100 kg 300 kg 100 kg 300 kg 830 kg 000 kg *11300 kg 710 kg *10 kg 1100 kg 9' 13,00 lb 7,900 lb 13,00 lb 7,900 lb 18,400 lb 11,000 lb *4,900 lb 1,800 lb *34,100 lb 4,700 lb 1. m 90 kg 340 kg 000 kg 300 kg 800 kg 470 kg 110 kg 700 kg 4' 13,100 lb 7,00 lb 13,00 lb 7,700 lb 17,800 lb 10,400 lb,00 lb 14,800 lb 0 m 100 kg 300 kg 900 kg 3400 kg 780 kg 40 kg 110 kg 40 kg *140 kg 10000 kg 0' 13,00 lb 7,800 lb 13,000 lb 7,00 lb 17,300 lb 10,100 lb 4,800 lb 14,00 lb *3,300 lb,100 lb 1. m 0 kg 380 kg 7800 kg 400 kg 11100 kg 30 kg *100 kg 1000 kg 4' 14,700 lb 8,00 lb 17,00 lb 9,900 lb 4,00 lb 14,000 lb *3,700 lb,00 lb 3.0 m 7900 kg 40 kg 780 kg 40 kg *1100 kg 400 kg *140 kg 100 kg *1710 kg *1710 kg 9' 17,400 lb 10,100 lb 17,400 lb 10,100 lb *4,300 lb 14,100 lb *31,00 lb,00 lb *37,800 lb *37,800 lb 4. m *7400 kg 300 kg *8300 kg 700 kg *11,00 kg 1040 kg *13100 kg *13100 kg 14' *1,400 lb 13,900 lb *18,300 lb 14,700 lb *4,300 lb 3,100 lb *8,900 lb *8,900 lb PC300LC-8 Arm: 318 mm 10'" ucket: 1.40 m 3 1.83 yd 3 SAE heaped Shoe: 700 mm 8 triple grouser 7. m *300 kg 00 kg *80 kg 0 kg 4' *11,700 lb 11,400 lb *1,00 lb 1,00 lb.0m *0 kg 410 kg *70 kg 00 kg 19' *11,00 lb 9,100 lb *1,000 lb 1,400 lb 4. m *400 kg 30 kg 30 kg 3800 kg *7800 kg 400 kg *900 kg 790 kg 14' *11,900 lb 7,900 lb 14,000 lb 8,400 lb *17,300 lb 11,900 lb *0,300 lb 17,00 lb 3.0 m 00 kg 30 kg 00 kg 3700 kg 840 kg 100 kg *100 kg 7400 kg *1000 kg 1170 kg 9' 1,300 lb 7,00 lb 13,700 lb 8,100 lb 18,700 lb 11,300 lb *3,00 lb 1,300 lb *33,100 lb,900 lb 1. m 40 kg 310 kg 00 kg 30 kg 810 kg 480 kg 11800 kg 900 kg *1700 kg 10700 kg 4' 1,000 lb,900 lb 13,300 lb 7,800 lb 18,000 lb 10,00 lb,000 lb 1,00 lb *3,900 lb 3,00 lb 0 m 0 kg 300 kg 900 kg 3400 kg 790 kg 400 kg 11400 kg 0 kg *170 kg 1000 kg 0' 1,00 lb 7,000 lb 13,100 lb 7,00 lb 17,00 lb 10,00 lb,100 lb 14,00 lb 38,00 lb,00 lb 1. m 90 kg 3400 kg 80 kg 330 kg 7800 kg 400 kg 1100 kg 400 kg *17000 kg 10100 kg *900 kg *900 kg 4' 13,100 lb 7,00 lb 1,900 lb 7,400 lb 17,00 lb 9,900 lb 4,700 lb 14,100 lb *37,00 lb,00 lb *1,100 lb *1,100 lb 3.0 m 80 kg 390 kg 7800 kg 400 kg 1100 kg 400 kg *10 kg 1000 kg *18,00 kg *1800 kg 9' 1,100 lb 8,700 lb 17,00 lb 10,000 lb 4,700 lb 14,100 lb *34,00 lb,00 lb *39,700 lb *39,700 lb 4. m *70 kg 10 kg *970 kg 0 kg *180 kg 1000 kg *100 kg *100 kg 14' *1,00 lb 11,400 lb *1,00 lb 14,00 lb *8,400 lb 3,100 lb *3,00 lb *3,00 lb.0 m *300 kg *300 kg *810 kg *810 kg 19 *13,900 lb *13,900 lb *18,000 lb *18,000 lb PC300LC-8 Arm: 400 mm 13'" ucket: 1.14 m 3 1.49 yd 3 SAE heaped Shoe: 700 mm 8 triple grouser 1. m 4.' 7. m *410 kg *410 kg 4' *9,00 lb *9,00 lb.0m *400 kg 300 kg *0 kg 4100 kg 19' *9,000 lb 7,800 lb *13,800 lb 9,000 lb 4. m *410 kg 3100 kg *00 kg 4000 kg *7100 kg 00 kg 14' *9,100 lb,800 lb *14,400 lb 8,800 lb *1,700 lb 1,400 lb 3.0 m *4300 kg 800 kg 30 kg 3800 kg *8000 kg 300 kg *90 kg 70 kg *190 kg 1300 kg 9' *9,00 lb,00 lb 14,000 lb 8,400 lb *17,700 lb 11,00 lb *1,300 lb 1,900 lb *8,00 lb 7,00 lb 1. m *40 kg 700 kg 10 kg 300 kg 8300 kg 490 kg *1100 kg 7100 kg *190 kg 1100 kg 4' *10,00 lb,000 lb 13,00 lb 7,900 lb 18,300 lb 10,900 lb *4,700 lb 1,00 lb *3,00 lb 4,400 lb 0 m 4800 kg 700 kg 90 kg 340 kg 8000 kg 40 kg 1140 kg 00 kg *170 kg 100 kg 0' 10,00 lb,000 lb 13,100 lb 7,00 lb 17,00 lb 10,300 lb,00 lb 14,00 lb *38,000 lb,00 lb 1. m 100 kg 900 kg 80 kg 330 kg 770 kg 440 kg 11100 kg 300 kg *170 kg 980 kg *970 kg *970 kg *900 kg *900 kg 4' 11,00 lb,400 lb 1,900 lb 7,300 lb 17,100 lb 9,900 lb 4,00 lb 13,900 lb *38,000 lb 1,800 lb *1,00 lb *1,00 lb *1,00 lb *1,00 lb 3.0 m 700 kg 30 kg 80 kg 3300 kg 7700 kg 4400 kg 11000 kg 0 kg *1400 kg 980 kg *140 kg *140 kg *9900 kg *9900 kg 9' 1,00 lb 7,00 lb 1,800 lb 7,300 lb 17,000 lb 9,700 lb 4,300 lb 13,700 lb *3,00 lb 1,700 lb *34,100 lb *34,100 lb *1,800 lb *1,800 lb 4. m 90 kg 4000 kg 7800 kg 400 kg *10900 kg 30 kg *1400 kg 1000 kg *0000 kg *0000 kg *1480 kg *1480 kg 14' 1,300 lb 8,800 lb 17,00 lb 9,900 lb *4,000 lb 13,900 lb *31,900 lb,00 lb *44,100 lb *44,100 lb *3,800 lb *3,800 lb.0 m *0 kg 700 kg *810 kg 00 kg *1100 kg 10300 kg *1400 kg *1400 kg 19 *14,400 lb 1,00 lb *18,000 lb 14,00 lb *4,400 lb,700 lb *3,00 lb *3,00 lb *Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE standard No. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 7% of tipping load. 13