The MicroAire Series 1000 Power Instrument System is a unitized pneumatic small power system. The precision instruments are lightweight yet durable. The specially designed thin blades provide smooth and accurate cutting. The instruments are powered by nitrogen or compressed air and require no lubrication. The instruments and hose are steam autoclavable. MicroAire offers a full line of pneumatic accessories, such as hoses, regulators, and adapters to connect our instruments to a nitrogen tank or other compressed air source. Also, all of the Series 1000 instruments can be ordered with a choice of hose connector, to adapt to other manufacturers hoses. (see back page of catalog for more details) The Series 1000 Power Instrument system is ideal for surgeons looking for delicate, lightweight, powerful pneumatic instruments.
The MicroAire 2003 Irrigator The 2003 Irrigator was designed to provide irrigation for the MicroAire Series 1000 pneumatic small surgical instruments. Compact and lightweight, the system operates from a standard 110V or 220V power source. The Irrigator is simple to use. A foot pedal activates the pump, which can deliver 2 to 60 cc of sterile water per minute to the bur, keeping it cool and clean. Dial the appropriate amount of flow by turning the knob on the control panel. Tubing for the system can be ordered in either single use, sterile packaged, disposable material or reusable, autoclaveable silicone. A variety of clips are available for attaching the system to regular and high-speed drills, and the low speed contra angle drill. 1140-010 2060-010 2170-010 2910-010
Series 1000 Pneumatic Instruments 1220 Sagittal Saw 1400 Reciprocating Saw 1700 Oscillating Saw 1710 Oscillating Saw Used for cutting transverse and wedge osteotomies, this saw is offered with a line of extra thin straight, angled or bent blades. Head rotates 360 for cutting at any angle. A variety of specially designed blades and rasps are available for precise cutting, shaping and contouring of the intramedullary canals of small bones. Special extended head provides extra visibility for Oral/Maxillofacial Surgery or any other procedures where visibility and reach are a problem. Narrow design provides good visibility. Uses extra thin blades for precision and control. OPERATING SPEEDS: 30,000 CPM 15,000 CPM 35,000 CPM 35,000 CPM TORQUE/STROKE: 6.1 INCH 8 8 WEIGHT: 5.0 OZ 5.0 OZ 5.0 OZ 5.0 OZ
Series 1000 Pneumatic Instruments 1740 Oscillating Saw Designed specifically for Foot Surgery. Accepts straight or crescentic shaped blades. 1620 Pencil Grip Wire Driver Provides flexibility and visibility needed for delicate, small bone surgery. Uses special MicroAire 1600-020 series K-wires with plastic guides. 1625 Pencil Grip Wire Driver This is the cannulated version of the 1620 wire driver. Accepts K-wires with special plastic guides. Cannulated to.062" (1.6mm) OPERATING SPEEDS: 24,000 CPM 3,000 RPM 3,000 RPM TORQUE/STROKE: 8 20.0 IN.OZ 20.0 IN.OZ WEIGHT: 6.0 OZ 5.0 OZ 5.0 OZ
SmartDriver 6640B Battery 6640 Pneumatic 1641 Electric The SmartDriver is the versatile and powerful modular pistol-grip instrument system from MicroAire. Available in Pneumatic, Electric and Battery-Powered models, the SmartDriver also features a variable speed trigger, and a forward/reverse switch (forward/reverse/oscillate on Battery) on the hand piece for easy, one-hand operation. MicroAire offers a wide range of SmartDriver collets for drilling, pinning, reaming, sawing, and lavaging. For more information, please refer to our SmartDriver brochure or visit us online at www.microaire.com.
Series 1000 Pneumatic Instruments 1140 Micro Drill The workhorse of small bone surgery for sculpting, drilling, passing wire and reaming intramedullary canals. It comes standard with a medium length bur guard. Long and extra-long bur guards are also available. 2910 High Speed Drill Provides the power needed for removing the third molar and the speed needed for bone sculpting. Comes with a built in medium length bur guard. Long and extra-long bur guards are also available. 1500 Micro Osteotome Linear impulse motor impacts the stationary blade producing a smooth, accurate, low vibration cutting action. 1500-003 1500-005 1500-006 1500-009 1500-016 1500-030 1500-047 OPERATING SPEEDS: 30,000 RPM 90,000 RPM 10,000 PULSES/MIN TORQUE/STROKE: 6.0 IN.OZ 2.5 IN.OZ _ WEIGHT: 5.0 OZ 7.5 OZ 5.0 OZ
Ordering Information Instruments 1140 Micro Drill 1220 Sagittal Saw 1400 Reciprocating Saw 1500 Micro Osteotome 1620 Pencil Grip Wire Driver 1625 Pencil Grip Wire Driver, Cannulated 1700 Oscillating Saw, Oral Surgery 1710 Oscillating Saw, General Surgery 1740 Oscillating Saw, Foot Surgery 2910 High Speed Drill 2950 High Speed Drill without Hand Throttle 6640 Pneumatic Pistol-Grip SmartDriver (see inside back page for other SmartDriver models) * When ordering, please specify hose connector for above instruments: MicroAire, Hall, Stryker, 3M or Synthes Osteotome Accessories 1500-003 Osteotome Blade 10mm x 50mm 1500-005 Osteotome Blade 6mm x 80mm 1500-006 Osteotome Blade 10mm x 80mm 1500-009 Osteotome Blade 15mm x 70mm 1500-016 Osteotome Blade, Slight Curve, 10mm x 80mm 1500-030 Gouge, Slight Curve, 10mm x 80mm 1500-047 Gouge, Curved, 10mm x 80mm Accessories 1100-005 Long Bur Guard for 1140 Micro Drill 1100-006 Extra Long Bur Guard for 1140 Micro Drill 1140-010 Irrigation Clip for 1140 Micro Drill 2910-010 Irrigation Clip for 2910 and 2950 High Speed Drills 2910-011 Extended Bur Guard for 2910 and 2950 High Speed Drills 2910-019 Extra Long Bur Guard for 2910 and 2950 High Speed Drills 9000-000 MicroAire standard hose 10 foot (3 meter) length, Schrader connector at diffuser 9013-000 Hall style replaces 5025-010 10 foot (3 meter) length, Schrader connector at diffuser 9014-000 3M Mini Driver style replaces A201 10 foot (3 meter) length, Schrader connector at diffuser 9017-000 Stryker style replaces 277-5 and 277-4 10 foot (3 meter) length, Schrader connector at diffuser 9100-000 Foot Control with 10 foot (3 meter) Hose and Schrader Connector 9010-000 Throttle Locking Rings (package of 10) 9500-000 Regulator, Single Outlet 9500-001 Stryker Adapter 9500-002 Schrader Input Connector 9502-000 Regulator, Dual Outlet 9600-010 Accessory Tray 9600-060 Bur Rack 6651-000 Sterlizing Tray for 8 instruments 6651-050 Sterlizing Tray for 5 instruments 1641 Edlich Drive Charlottesville, VA 22911 U.S.A. TOLL FREE (800) 722-0822 (434) 975-8000 FAX (800) 648-4309 (434) 975-4131 Visit us online at: www.microaire.com 2003, MicroAire Surgical Instruments LLC Lit 1000, Rev. D Printed in USA 3/03