Coupling specification sheet Movexx
Coupling determination Base-part coupling Front-part coupling When determining the coupling, there are two choices you have to make. Which base-part is mounted on the machine and which front-part is coupled to the trolley. On the right is the explanation of the base-part and the front-part. On pages and 4 there are flowcharts for determining which parts are needed. Starting on page 5 there are the drawings where the dimensions of the coupling can be filled in. On page the rest of the specifications and the standard couplings can be found The type of base-part te be used is depending on the machine and on the hight of the connection with the trolley. The base-part includes the hinge point to ensure a flexible connection between machine and trolley. The front-part must fit to the trolley frame Each type of front-part can be mounted to every base-part There are 6 front-part types. On page and 4 there are flowcharts that can be used to determine which front-part is needed to connect to the trolley. If the front of the trolley is flat (fig. ), use the flowchart at page. If the front of the trolley is not flat (fig. ), use the flowchart at page 4. Front-part Flat fig. Base-part Not flat fig. Coupling specification sheet Movexx V4
Determining flowchart for base-part and front-part (standard) HA --> page 5 HB --> page 6 HC --> page 7 Coupling specification sheet Movexx V4 Standard
Determining flowchart for base-part and front-part (Extended) HD --> page 8 HE --> page 9 HF --> page 0 Coupling specification sheet Movexx V4 Extended 4
Dimensions front-part HA Dimensions 50 50 O 8,5 74 0 0 5 05 0 0 0 Standard Coupling specification sheet Movexx V4 Getekend : Gecontroleerd : Maateenheid : mm Formaat : Schaal : A4 : Naam Johan - Datum 5--04 DD-MM-JJJJ Titel : Materiaal: Documentnr. : HA front Amerikaanse Projectie Bestandsnaam : HA front.dft Rev. 5
Dimensions front-part HB (Standard - Lowered) 50 50 Dimensions 5 4 4 O 8,5 74 0 0 0 0 Standard - Lowered Coupling specification sheet Movexx V4 Getekend : Gecontroleerd : Maateenheid : mm Formaat : Schaal : A4 : Naam Johan - Datum 5--04 DD-MM-JJJJ Titel : Materiaal: Documentnr. : HB front Amerikaanse Projectie Bestandsnaam : HB front.dft Rev. 6
Dimensions front-part HC (Standard - Raised) Dimensions 50 50 5 4 0 O 8,5 74 05 4 0 0 Standard - Raised Coupling specification sheet Movexx V4 Getekend : Gecontroleerd : Maateenheid : mm Formaat : Schaal : A4 :,5 Naam Johan - Datum 5--04 DD-MM-JJJJ Titel : Materiaal: Documentnr. : HC front Amerikaanse Projectie Bestandsnaam : HC front.dft Rev. 7
Dimensions front-part HD (Standard - Extended) 50 50 5 Dimensions 5 O 8,5 74 0 0 05 0 0 0 Standard - Extended Coupling specification sheet Movexx V4 Getekend : Gecontroleerd : Maateenheid : mm Formaat : Schaal : A4 :,5 Naam Johan - Datum 5--04 DD-MM-JJJJ Titel : Materiaal: Documentnr. : HD front Amerikaanse Projectie Bestandsnaam : HD front.dft Rev. 8
Dimensions front-part HE (Extended - Lowered) 50 50 4 5 Dimensions O 8,5 74 0 4 0 05 0 0 5 Extended - Lowered Coupling specification sheet Movexx V4 Getekend : Gecontroleerd : Maateenheid : mm Formaat : Schaal : A4 :,86 Naam Johan - Datum 5--04 DD-MM-JJJJ Titel : Materiaal: Documentnr. : HE front Amerikaanse Projectie Bestandsnaam : HE front.dft Rev. 9
Dimensions front-part HF (Extended - Raised) 50 50 4 5 Dimensions 5 74 O 8,5 0 0 05 4 0 0 Extended - Raised Coupling specification sheet Movexx V4 Getekend : Gecontroleerd : Maateenheid : mm Formaat : Schaal : A4 :,86 Naam Johan - Datum 5--04 DD-MM-JJJJ Titel : Materiaal: Documentnr. : HF front Amerikaanse Projectie Bestandsnaam : HF front.dft Rev. 0
Standard couplings Customer specific couplings Table on page contains the standard couplings of Movexx. Including the dimensions. Important to know is that dim. is the dimension of the tube at which the coupling needs to be connected. The standard that Movexx follows is tubesize + mm. This means that when the tubesize is 0mm, Dim. has to be mm. If no standard coupling to your application is available, then you can choose a customer specific coupling. You need to complete the drawing of the appropriate coupling type. In the table on page you find the prices of the customer specific couplings. H700 H700 H7050 H7060 H7070 H7080 H7090 Coupling specification sheet Movexx V4
Existing couplings Standard couplings Article Description Type Dim. Dim. Dim. Dim. 4 Dim. 5 H0067 HA50..7.0.0 HA 50 7 0 0 H0094 HA5.8.0.0.0 HA 5 8 0 0 0 H0095 HA50..0.0.0 HA 50 0 0 0 H005 HA50.4.5.0.0 HA 50 4 5 0 0 H0004 HA45.55.45.0.0 HA 45 55 45 0 0 H0004 CLEAN RM HA45.55.45.0.0 (Stainless) HA 45 55 45 0 0 H0057 HA45.4.5.0.0 HA 45 4 5 0 0 H009 HB45.60.45.0.0 HB 45 60 45 0 0 H0090 HD45.0.5.0.50 HD 45 0 5 0 50 H0084 HD50.40.45.0.40 HD 50 40 45 0 40 H0055 HD70.7.5.0.40 HD 70 7 5 0 40 Customer specific coupling HA5000 Include completed drawing with P.O. HA HB5000 Include completed drawing with P.O. HB HC5000 Include completed drawing with P.O. HC HD5000 Include completed drawing with P.O. HD HE5000 Include completed drawing with P.O. HE HF5000 Include completed drawing with P.O. HF Coupling specification sheet Movexx V4
Hook Tips
Hook Tips
Hook Tips
Hook Tips
Hook Tips
Contact Info Technical Information: Kelly Sullivan +-85-75-065 kelly.sullivan@leanfactoryamerica.com General Information: Lean Factory America, LLC 86 E. rd Street Buchanan, MI 4907 +-888-674-89 www.leanfactoryamerica.com