Material Handling Solutions

Material Handling Solutions

Since 1989, North Shore Manufacturing has been providing productive, material handling solutions for a wide variety of industries including scrap recycling, solid waste handling, mining, forestry, foundry, utility and general construction industries. From a wide range of Builtrite TM heavy duty grapples and other attachments, to our truck mounted material handlers and stationary electric material handlers, we have the tools to get the job done in the safest, quietest and most productive manner possible. Do you have a custom application? No problem. Our company was built on listening to our customers needs by providing practical, productive solutions and by backing them up with a 1 year, 2000 hour, limited warranty and by providing installation expertise when new handlers are delivered to the customer. Our 55,000 ft. 2 (5,109 M 2 ), state of the art manufacturing facility is nestled in Two Harbors, Minnesota, U.S.A. near the beautiful shores of Lake Superior. Our seasoned workforce is second to none when it comes to heavy steel fabrication techniques while our engineering staff uses state of the art, solid modeling computer software to ensure we get the design done right the first time. While other businesses have been busy out-sourcing their fabrication, our philosophy has always been to keep as much as possible in-house, thereby retaining the fabrication wisdom and being able to respond quickly to customer demand. We welcome visitors to our premises. Our normal business hours are 8:00 AM to 4:30 PM, Monday-Friday, Central Standard Time. If you would like to arrange a tour of our facility, please call. Table of Contents: Stationary Electric Material Handlers Pages 4-5 Truck Mounted Material Handlers Pages 6-7 Scrap Handling Attachments Page 8 Solid Waste Handling Attachments Page 9 General Purpose Attachments Page 10 Parts and Service Page 11 Northshore Manufacturing, Inc. 530 Recycle Center Drive Two Harbors, Minnesota, U.S.A. 55616 Phone: 218-834-5555 Fax: 218-834-5556 E-Mail: info@builtritehandlers.com Web: www.builtritehandlers.com

Stationary Electric Material Handlers Designed for fast and efficient feeding of shredders, balers, stationary shears and in-feed conveyors, our stationary electric material handlers are designed and built using the finest materials possible to ensure long and reliable use. Key features and benefits include: Lower Operating Costs - A stationary electric material handler is in most cases, significantly less expensive to operate as compared to diesel powered units. Electricity costs are fixed as opposed to diesel so you can get a better handle on your everyday expenses. Lower Maintenance Costs - A stationary electric unit needs much less maintenance as compared to a diesel powered machine due to less moving parts. Instant on, instant off - Outside of warming the hydraulic oil (tank heaters are optional), a stationary electric requires no warm up or cool down period to operate. Clean and Quiet - A stationary electric material handler gives off no exhaust fumes and is much quieter to operate. 10 Models To Choose From - Whatever your material handling needs are, we have the size handler for your operation. Variety - A wide variety of boom, attachment, hydraulic controls, magnet rectifier packages, cab features, etc. are available to suit your specific needs. Each model can be designed as a self contained, stationary remote power unit or operator station. Design and Installation Expertise - For us and the industries we serve, the One size fits all. motto just doesn t apply. Our engineers meticulously go over each application and design a handler to meet a customer s need. Upon delivery, we have a factory representative there to assist in the installation to ensure a safe and productive operation. Service - We know that in this day and age, it is paramount that your equipment keeps up and running on a regular basis. By fabricating the vast majority of our products in our own plant and stocking those that we do not, we are able to respond to our customers needs quicker than most. Model Maximum Reach Lift Capacity @ Full Reach 40-SE 20 4 / 6.2M 1,800# / 818 Kg. 80-SE 22 4 / 6.8M 2,500# / 1,136 Kg. 1010-SE 25 4 / 7.7M 5,000# / 2,273 Kg. 1300-SE 25 0 / 7.6M 5,000# / 2,373 Kg. 2100-SE 30 0 / 9.1M 5,000# / 2,273 Kg. 2500-SE 40 0 / 12.2M 6,000# / 2,727 Kg. 4600-SE 45 0 / 13.7M 5,200# / 2,363 Kg. 5100-SE 47 0 / 14.3M 11,000# / 5,000 Kg. 5600-SE 57 0 / 17.4M 8,000# / 3,636 Kg. 6500-SE 65 0 / 19.8M 14,500# / 6,590 Kg. Note: Lift capacities shown do not include attachment weights. 5600-SE with 3 Piece Boom and Magnet Rectifier Package

2100-SE Removing Container Lids 5100-SE Loading Solid Waste Baler 2100-SE With Shear 1300-SE Waste Transfer (Loading & Tamping) 1300-SE Remote Controlled Handling Cast 1010-SE Loading Baler

Truck Mounted Material Handlers Our truck mounted material handlers are designed for incredible versatility and unmatched lifting capability. From scrap handling to picking and hauling various tools and materials to your job site, we are sure to have the proper handler for your application. We have the in-house expertise to build and install the complete package, including the truck bed, hydraulics, electrical and handler itself. Key features and benefits include: High Lift Capability - Our handlers have one of the highest lift capability to weight ratios in the industry. Using state of the art computer modeling software and the finest materials available, our handlers are designed to maximize performance with minimal weight. 6 Models To Choose From - Whatever your material handling needs are, we have the size handler for your operation. Variety - A wide variety of boom, attachment, hydraulic controls, magnet rectifier packages, etc. are available to suit your specific needs. Service - We know that in this day and age, it is paramount that your equipment keeps up and running on a regular basis. By fabricating the vast majority of our products in our own plant and stocking those that we do not, we are able to respond to our customers needs quicker than most. Model Maximum Reach Lift Capacity @ Full Reach 60-TM 18 4 / 5.6M 2,000# / 909 Kg. 80-TM 22 4 / 6.8M 2,600# / 1,181 Kg. 1010-TM 25 8 / 7.8M 4,900# / 2,227 Kg. 1300-TM 22 6 / 6.85M 6,600# / 3,000 Kg. 2100-TM 25 6 / 7.8M 6,300# / 2,863 Kg. 2200-TM 25 6 / 7.8M 7,634# / 3,470 Kg. Note: Lift capacities shown do not include attachment weights. 2100-TM Cable Reel Handling 2200-TM Operator s View

60-TM Curb side Pick-Up 80-TM Curb side Pick-Up 1010-TM (Tail Mount) RR Track Maintenance 1300-TM Highway Maintenance 2100-TM (Tail Mount) Highway Maintenance 2200-TM Attachment Handling

Scrap Handling Attachments 4-Tine Orange Peel Grapples Low upper head profile. Wide openings. Made from high tensile steel. AR 500, wear resistant steel used on all spade tips. Oversized, hardened cylinder and pivot pins. Heavily shrouded, bolt-on cylinder guards and side access port. 3 spade configurations available: Narrow, mid and full spade (mid spade shown). 360 Continuous rotation. 1 yard and up use dual rotation motors. Self Contained, 3-Tine Orange Peel Grapple Designed for cleaning out debris caught in the feed hopper of indoor stationary shredders and shears. Fully self contained with radio remote control...can be operated by the shredder operator, reducing labor cost. Grapple arms constructed of high strength, abrasion resistant steel. Tine tips made from hardened bucket teeth that are easy to replace. Oversized, hardened cylinder and pivot pins. Magnet Rotator Allows magnet to be rotated 360 continuously. Excellent for stacking and piling longer items like railroad rail, beams, pipe, etc. Designed to match up to any size magnet. Electric swivel allows for well protected power cable. Car/Bale Grapple Designed for handling bulky items like car bodies and bales. High tensile steel used throughout. AR 500 wear resistant plate used for tips. 360 Continuous rotation. Oversized, hardened cylinder and pivot pins. 2/3 Tine Grapple Designed for handling bulky items like car bodies, bales, etc. and general scrap handling applications. High tensile steel used throughout. AR 500 wear resistant plate used for tips. 360 Continuous rotation. Oversized, hardened cylinder and pivot pins.

Solid Waste Handling Attachments Bale Clamp Grapple 360 continuous rotation, using a heavy duty bearing. Our rotators are designed for the specific carrier they are mounted to, providing long life with minimal maintenance requirements. Dimpled arms allow for a solid grip while preventing the clamp from damaging shrink-wrapped bales. Cylinder is designed for high pressure, continuous use. It is well shrouded to prevent material from damaging the cylinder rod or other components. Trash Tamping Grapple Designed for loading trash into a truck bed/rail car, etc. and in its closed position, tamping and densifying the material to ensure an even, full load. 360, continuous rotation using bearing and hydraulic motor. Grapple arms constructed of high strength, abrasion resistant steel. Oversized, hardened cylinder and pivot pins. Municipal Trash/Waste Grapple Designed primarily for road side pick-up. Curvature of arms prevents grapple from picking up soil when loading roadside debris. 360 continuous rotation with internal vane rotator. General Purpose Waste Grapple (Standard and Heavy Duty) (Heavy Duty Shown) Designed for multi use handling of waste, from garbage, white goods, carcasses, etc. High tensile steel used throughout. AR 500 wear resistant plate used for tips. 360 Rotation (standard uses internal vane rotator, heavy duty uses bearing and hydraulic motor). Oversized, hardened cylinder and pivot pins.

General Purpose Attachments Bypass Utility Grapple (Standard and Heavy Duty) (Standard Shown) Designed for handling logs, brush, etc. 360 rotation with internal vane rotator. Tines bypass, allowing it to pick up large, bulky items to single logs. Heavy duty version available (rotation bearing, larger pins, heavier plate, etc.). Butt Tine Utility Grapple (Standard and Heavy Duty) (Standard Shown) Designed for handling bulky items like white goods, logs, brush, etc. 360 rotation with internal vane rotator. Tines stop on each other, allowing precise picking and placing. Heavy duty version available (rotation bearing, larger pins, heavier plate, etc.). Log Grapple Designed for handling single and multiple logs. Heavy duty, 360 rotation with bearing. Designed for continuous duty in harsh conditions. Clamshell Bucket Designed for handling aggregate, dirt, etc. Heavy duty, 360 rotation with bearing. Designed for continuous duty in harsh conditions. Skid Steer Grapple Designed specifically for skid steer loaders to handle rock, logs, brush, etc. Heavy duty, 360 rotation with internal vane rotator. Uses standard skid steer mounting plate.

Design and Installation Expertise A successful installation and happy customer starts with good planning. Our seasoned sales and design staff will gather information from the customer, initially over the phone, and many times in more complicated applications, we will fly out to the customer s site to gather measurements and find out exactly what expectations he or she has for our equipment. Prior to building a product, detailed drawings are provided to the customer for sign off. Then, after the product is completed and shipped, we will again go to the job site and aid in installation (for Stationary Electric Material Handlers). Customer Support We know that no matter how good a product is, it is only as good as the support it receives after the sale. From repairs to parts support, we will gather the information and respond to you in a professional and timely manner. Do you own a piece of equipment not manufactured by us? No problem. In many cases, we can track down the necessary part for you. We carry a large inventory of spare parts for all of our equipment as well as for other OEM manufacturer s loaders and material handlers.

I have now worked with Builtrite personnel on three different projects. In each case, they flew out to our facilities, evaluated each unique situation and subsequently came up with a proposed solution. They hit the mark and then some for each. More impressively, they follow up to see how the equipment is working on a regular basis. I look forward to working with them again on our next project. Mike Buchanan, EnviroSolutions, Inc. Manassas, Virginia We handle and process a large volume of rail, beam and skeletal plate. My Builtrite magnet rotator allows me to unload trucks safely and efficiently. It also allows us to stack these materials in a neat fashion, optimizing space. It has increased overall efficiency, in my estimation, by 30-40% with the added benefits of reducing operator fatigue, magnet wear and machine wear. This product is a must have for those handling similar items. Steve Kenigsberg, Simko, Inc. Superior, Wisconsin Due to our line of work, we have very specific requirements for our fleet of truck mounted cranes. The folks at Builtrite listened to what our needs were and designed our 1300-TM to our specifications. We liked the first unit so much in fact, we have since purchased several more. Tri-State Drilling, Inc. Plymouth, Minnesota We bought a Builtrite Orange Peel last year. It is hands down the toughest, most durable grapple we have owned. Matt Runde, Runde Metals LaCrosse, Wisconsin October 2009 - Northshore Manufacturing, Inc. - All Rights Reserved.